kmx git

#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in all
# copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Copyright (C) 2014 Joakim Söderberg <joakim.soderberg@gmail.com>
#
# This is intended to be run by a custom target in a CMake project like this.
# 0. Compile program with coverage support.
# 1. Clear coverage data. (Recursively delete *.gcda in build dir)
# 2. Run the unit tests.
# 3. Run this script specifying which source files the coverage should be performed on.
#
# This script will then use gcov to generate .gcov files in the directory specified
# via the COV_PATH var. This should probably be the same as your cmake build dir.
#
# It then parses the .gcov files to convert them into the Coveralls JSON format:
# https://coveralls.io/docs/api
#
# Example for running as standalone CMake script from the command line:
# (Note it is important the -P is at the end...)
# $ cmake -DCOV_PATH=$(pwd) 
#         -DCOVERAGE_SRCS="catcierge_rfid.c;catcierge_timer.c" 
#         -P ../cmake/CoverallsGcovUpload.cmake
#
CMAKE_MINIMUM_REQUIRED(VERSION 2.8)


#
# Make sure we have the needed arguments.
#
if (NOT COVERALLS_OUTPUT_FILE)
	message(FATAL_ERROR "Coveralls: No coveralls output file specified. Please set COVERALLS_OUTPUT_FILE")
endif()

if (NOT COV_PATH)
	message(FATAL_ERROR "Coveralls: Missing coverage directory path where gcov files will be generated. Please set COV_PATH")
endif()

if (NOT COVERAGE_SRCS)
	message(FATAL_ERROR "Coveralls: Missing the list of source files that we should get the coverage data for COVERAGE_SRCS")
endif()

if (NOT PROJECT_ROOT)
	message(FATAL_ERROR "Coveralls: Missing PROJECT_ROOT.")
endif()

# Since it's not possible to pass a CMake list properly in the
# "1;2;3" format to an external process, we have replaced the
# ";" with "*", so reverse that here so we get it back into the
# CMake list format.
string(REGEX REPLACE "\\*" ";" COVERAGE_SRCS ${COVERAGE_SRCS})

find_program(GCOV_EXECUTABLE gcov)

if (NOT GCOV_EXECUTABLE)
	message(FATAL_ERROR "gcov not found! Aborting...")
endif()

find_package(Git)

# TODO: Add these git things to the coveralls json.
if (GIT_FOUND)
	# Branch.
	execute_process(
		COMMAND ${GIT_EXECUTABLE} rev-parse --abbrev-ref HEAD
		WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
		OUTPUT_VARIABLE GIT_BRANCH
		OUTPUT_STRIP_TRAILING_WHITESPACE
	)

	macro (git_log_format FORMAT_CHARS VAR_NAME)
		execute_process(
			COMMAND ${GIT_EXECUTABLE} log -1 --pretty=format:%${FORMAT_CHARS}
			WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
			OUTPUT_VARIABLE ${VAR_NAME}
			OUTPUT_STRIP_TRAILING_WHITESPACE
		)
	endmacro()

	git_log_format(an GIT_AUTHOR_EMAIL)
	git_log_format(ae GIT_AUTHOR_EMAIL)
	git_log_format(cn GIT_COMMITTER_NAME)
	git_log_format(ce GIT_COMMITTER_EMAIL)
	git_log_format(B GIT_COMMIT_MESSAGE)

	message("Git exe: ${GIT_EXECUTABLE}")
	message("Git branch: ${GIT_BRANCH}")
	message("Git author: ${GIT_AUTHOR_NAME}")
	message("Git e-mail: ${GIT_AUTHOR_EMAIL}")
	message("Git commiter name: ${GIT_COMMITTER_NAME}")
	message("Git commiter e-mail: ${GIT_COMMITTER_EMAIL}")
	message("Git commit message: ${GIT_COMMIT_MESSAGE}")

endif()

############################# Macros #########################################

#
# This macro converts from the full path format gcov outputs:
#
#    /path/to/project/root/build/#path#to#project#root#subdir#the_file.c.gcov
#
# to the original source file path the .gcov is for:
#
#   /path/to/project/root/subdir/the_file.c
#
macro(get_source_path_from_gcov_filename _SRC_FILENAME _GCOV_FILENAME)

	# /path/to/project/root/build/#path#to#project#root#subdir#the_file.c.gcov 
	# -> 
	# #path#to#project#root#subdir#the_file.c.gcov   
	get_filename_component(_GCOV_FILENAME_WEXT ${_GCOV_FILENAME} NAME)

	# #path#to#project#root#subdir#the_file.c.gcov -> /path/to/project/root/subdir/the_file.c
	string(REGEX REPLACE "\\.gcov$" "" SRC_FILENAME_TMP ${_GCOV_FILENAME_WEXT})
	string(REGEX REPLACE "\#" "/" SRC_FILENAME_TMP ${SRC_FILENAME_TMP})
	set(${_SRC_FILENAME} "${SRC_FILENAME_TMP}")
endmacro()

##############################################################################

# Get the coverage data.
file(GLOB_RECURSE GCDA_FILES "${COV_PATH}/*.gcda")
message("GCDA files:")

# Get a list of all the object directories needed by gcov
# (The directories the .gcda files and .o files are found in)
# and run gcov on those.
foreach(GCDA ${GCDA_FILES})
	message("Process: ${GCDA}")
	message("------------------------------------------------------------------------------")
	get_filename_component(GCDA_DIR ${GCDA} PATH)

	#
	# The -p below refers to "Preserve path components",
	# This means that the generated gcov filename of a source file will
	# keep the original files entire filepath, but / is replaced with #.
	# Example:
	#
	# /path/to/project/root/build/CMakeFiles/the_file.dir/subdir/the_file.c.gcda
	# ------------------------------------------------------------------------------
	# File '/path/to/project/root/subdir/the_file.c'
	# Lines executed:68.34% of 199
	# /path/to/project/root/subdir/the_file.c:creating '#path#to#project#root#subdir#the_file.c.gcov'
	#
	# If -p is not specified then the file is named only "the_file.c.gcov"
	#
	execute_process(
		COMMAND ${GCOV_EXECUTABLE} -p -o ${GCDA_DIR} ${GCDA}
		WORKING_DIRECTORY ${COV_PATH}
	)
endforeach()

# TODO: Make these be absolute path
file(GLOB ALL_GCOV_FILES ${COV_PATH}/*.gcov)

# Get only the filenames to use for filtering.
#set(COVERAGE_SRCS_NAMES "")
#foreach (COVSRC ${COVERAGE_SRCS})
#	get_filename_component(COVSRC_NAME ${COVSRC} NAME)
#	message("${COVSRC} -> ${COVSRC_NAME}")
#	list(APPEND COVERAGE_SRCS_NAMES "${COVSRC_NAME}")
#endforeach()

#
# Filter out all but the gcov files we want.
#
# We do this by comparing the list of COVERAGE_SRCS filepaths that the
# user wants the coverage data for with the paths of the generated .gcov files,
# so that we only keep the relevant gcov files.
#
# Example:
# COVERAGE_SRCS =
#				/path/to/project/root/subdir/the_file.c
#
# ALL_GCOV_FILES =
#				/path/to/project/root/build/#path#to#project#root#subdir#the_file.c.gcov
#				/path/to/project/root/build/#path#to#project#root#subdir#other_file.c.gcov
# 
# Result should be:
# GCOV_FILES = 
#				/path/to/project/root/build/#path#to#project#root#subdir#the_file.c.gcov
#
set(GCOV_FILES "")
#message("Look in coverage sources: ${COVERAGE_SRCS}")
message("\nFilter out unwanted GCOV files:")
message("===============================")

set(COVERAGE_SRCS_REMAINING ${COVERAGE_SRCS})

foreach (GCOV_FILE ${ALL_GCOV_FILES})

	#
	# /path/to/project/root/build/#path#to#project#root#subdir#the_file.c.gcov 
	# -> 
	# /path/to/project/root/subdir/the_file.c 
	get_source_path_from_gcov_filename(GCOV_SRC_PATH ${GCOV_FILE})

	# Is this in the list of source files?
	# TODO: We want to match against relative path filenames from the source file root...
	list(FIND COVERAGE_SRCS ${GCOV_SRC_PATH} WAS_FOUND)

	if (NOT WAS_FOUND EQUAL -1)
		message("YES: ${GCOV_FILE}")
		list(APPEND GCOV_FILES ${GCOV_FILE})

		# We remove it from the list, so we don't bother searching for it again.
		# Also files left in COVERAGE_SRCS_REMAINING after this loop ends should
		# have coverage data generated from them (no lines are covered).
		list(REMOVE_ITEM COVERAGE_SRCS_REMAINING ${GCOV_SRC_PATH})
	else()
		message("NO:  ${GCOV_FILE}")
	endif()
endforeach()

# TODO: Enable setting these
set(JSON_SERVICE_NAME "travis-ci")
set(JSON_SERVICE_JOB_ID $ENV{TRAVIS_JOB_ID})

set(JSON_TEMPLATE
"{
  \"service_name\": \"\@JSON_SERVICE_NAME\@\",
  \"service_job_id\": \"\@JSON_SERVICE_JOB_ID\@\",
  \"source_files\": \@JSON_GCOV_FILES\@
}"
)

set(SRC_FILE_TEMPLATE
"{
  \"name\": \"\@GCOV_SRC_REL_PATH\@\",
  \"source\": \"\@GCOV_FILE_SOURCE\@\",
  \"coverage\": \@GCOV_FILE_COVERAGE\@
}"
)

message("\nGenerate JSON for files:")
message("=========================")

set(JSON_GCOV_FILES "[")

# Read the GCOV files line by line and get the coverage data.
foreach (GCOV_FILE ${GCOV_FILES})

	get_source_path_from_gcov_filename(GCOV_SRC_PATH ${GCOV_FILE})
	file(RELATIVE_PATH GCOV_SRC_REL_PATH "${PROJECT_ROOT}" "${GCOV_SRC_PATH}")

	# Loads the gcov file as a list of lines.
	file(STRINGS ${GCOV_FILE} GCOV_LINES)

	# Instead of trying to parse the source from the
	# gcov file, simply read the file contents from the source file.
	# (Parsing it from the gcov is hard because C-code uses ; in many places
	#  which also happens to be the same as the CMake list delimeter).
	file(READ ${GCOV_SRC_PATH} GCOV_FILE_SOURCE)

	string(REPLACE "\\" "\\\\" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}")
	string(REGEX REPLACE "\"" "\\\\\"" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}")
	string(REPLACE "\t" "\\\\t" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}")
	string(REPLACE "\r" "\\\\r" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}")
	string(REPLACE "\n" "\\\\n" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}")
	# According to http://json.org/ these should be escaped as well.
	# Don't know how to do that in CMake however...
	#string(REPLACE "\b" "\\\\b" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}")
	#string(REPLACE "\f" "\\\\f" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}")
	#string(REGEX REPLACE "\u([a-fA-F0-9]{4})" "\\\\u\\1" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}")

	# We want a json array of coverage data as a single string
	# start building them from the contents of the .gcov
	set(GCOV_FILE_COVERAGE "[")

	foreach (GCOV_LINE ${GCOV_LINES})
		# Example of what we're parsing:
		# Hitcount  |Line | Source
		# "        8:   26:        if (!allowed || (strlen(allowed) == 0))"
		string(REGEX REPLACE 
			"^([^:]*):([^:]*):(.*)$" 
			"\\1;\\2;\\3"
			RES
			"${GCOV_LINE}")

		list(LENGTH RES RES_COUNT)
		if (RES_COUNT GREATER 2)
			list(GET RES 0 HITCOUNT)
			list(GET RES 1 LINE)
			list(GET RES 2 SOURCE)

			string(STRIP ${HITCOUNT} HITCOUNT)
			string(STRIP ${LINE} LINE)

			# Lines with 0 line numbers are metadata and can be ignored.
			if (NOT ${LINE} EQUAL 0)
				
				# Translate the hitcount into valid JSON values.
				if (${HITCOUNT} STREQUAL "#####")
					set(GCOV_FILE_COVERAGE "${GCOV_FILE_COVERAGE}0, ")
				elseif (${HITCOUNT} STREQUAL "-")
					set(GCOV_FILE_COVERAGE "${GCOV_FILE_COVERAGE}null, ")
				else()
					set(GCOV_FILE_COVERAGE "${GCOV_FILE_COVERAGE}${HITCOUNT}, ")
				endif()
				# TODO: Look for LCOV_EXCL_LINE in SOURCE to get rid of false positives.
			endif()
		else()
			message(WARNING "Failed to properly parse line --> ${GCOV_LINE}")
		endif()
	endforeach()

	# Advanced way of removing the trailing comma in the JSON array.
	# "[1, 2, 3, " -> "[1, 2, 3"
	string(REGEX REPLACE ",[ ]*$" "" GCOV_FILE_COVERAGE ${GCOV_FILE_COVERAGE})

	# Append the trailing ] to complete the JSON array.
	set(GCOV_FILE_COVERAGE "${GCOV_FILE_COVERAGE}]")

	# Generate the final JSON for this file.
	message("Generate JSON for file: ${GCOV_SRC_REL_PATH}...")
	string(CONFIGURE ${SRC_FILE_TEMPLATE} FILE_JSON)

	set(JSON_GCOV_FILES "${JSON_GCOV_FILES}${FILE_JSON}, ")
endforeach()

# Loop through all files we couldn't find any coverage for
# as well, and generate JSON for those as well with 0% coverage.
foreach(NOT_COVERED_SRC ${COVERAGE_SRCS_REMAINING})

	# Loads the source file as a list of lines.
	file(STRINGS ${NOT_COVERED_SRC} SRC_LINES)

	set(GCOV_FILE_COVERAGE "[")
	set(GCOV_FILE_SOURCE "")

	foreach (SOURCE ${SRC_LINES})
		set(GCOV_FILE_COVERAGE "${GCOV_FILE_COVERAGE}0, ")

		string(REPLACE "\\" "\\\\" SOURCE "${SOURCE}")
		string(REGEX REPLACE "\"" "\\\\\"" SOURCE "${SOURCE}")
		string(REPLACE "\t" "\\\\t" SOURCE "${SOURCE}")
		string(REPLACE "\r" "\\\\r" SOURCE "${SOURCE}")
		set(GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}${SOURCE}\\n")
	endforeach()

	# Remove trailing comma, and complete JSON array with ]
	string(REGEX REPLACE ",[ ]*$" "" GCOV_FILE_COVERAGE ${GCOV_FILE_COVERAGE})
	set(GCOV_FILE_COVERAGE "${GCOV_FILE_COVERAGE}]")

	# Generate the final JSON for this file.
	message("Generate JSON for non-gcov file: ${NOT_COVERED_SRC}...")
	string(CONFIGURE ${SRC_FILE_TEMPLATE} FILE_JSON)
	set(JSON_GCOV_FILES "${JSON_GCOV_FILES}${FILE_JSON}, ")
endforeach()

# Get rid of trailing comma.
string(REGEX REPLACE ",[ ]*$" "" JSON_GCOV_FILES ${JSON_GCOV_FILES})
set(JSON_GCOV_FILES "${JSON_GCOV_FILES}]")

# Generate the final complete JSON!
message("Generate final JSON...")
string(CONFIGURE ${JSON_TEMPLATE} JSON)

file(WRITE "${COVERALLS_OUTPUT_FILE}" "${JSON}")
message("###########################################################################")
message("Generated coveralls JSON containing coverage data:") 
message("${COVERALLS_OUTPUT_FILE}")
message("###########################################################################")
thodg/cgminer/compat/jansson-2.9/cmake/CoverallsGenerateGcov.cmake

Commit

compat/jansson-2.9/cmake/CoverallsGenerateGcov.cmake
