kmx git

Commit	Date	Message
34593aae	2015-05-12T17:00:25	attr: declare variable at top of block for msvc
90997e40	2015-05-12T12:14:55	attr: less path mangling during attribute matching When handling attr matching, simply compare the directory path where the attribute file resides to the path being matched. Skip over commonality to allow us to compare the contents of the attribute file to the remainder of the path. This allows us to more easily compare the pattern directly to the path, instead of trying to guess whether we want to compare the path's basename or the full path based on whether the match was inside a containing directory or not. This also allows us to do fewer translations on the pattern (trying to re-prefix it.)
9465bedb	2015-05-12T16:02:18	attr: don't mangle file path during attr matching When determining whether some file matches an attr pattern, do not try to truncate the path to pass to fnmatch. When there is no containing directory for an item (eg, from a .gitignore in the root) this will cause us to truncate our path, which means that we cannot do meaningful comparisons on it and we may have false positives when trying to determine whether a given file is actually a file or a folder (as we have lost the path's base information.) This mangling was to allow fnmatch to compare a directory on disk to the name of a directory, but it is unnecessary as our fnmatch accepts FNM_LEADING_DIR.
ef6d0722	2015-05-12T13:06:05	attr: don't match files for folders When ignoring a path "foo/", ensure that this is actually a directory, and not simply a file named "foo".
4c09e19a	2015-03-30T14:07:44	Improvements to ignore performance on Windows. Minimizing the number directory and file opens, minimizes the amount of IO thus reducing the overall cost of performing ignore operations.
c02a0e46	2015-04-17T18:27:28	attr_file: fix subdirectory attr case. Closes #2966.
f58cc280	2015-02-03T00:28:32	attr_session: keep a temp buffer
d4b1b767	2015-02-03T00:03:49	checkout: cache system attributes file location
9f779aac	2015-01-29T14:40:55	attrcache: don't re-read attrs during checkout During checkout, assume that the .gitattributes files aren't modified during the checkout. Instead, create an "attribute session" during checkout. Assume that attribute data read in the same checkout "session" hasn't been modified since the checkout started. (But allow subsequent checkouts to invalidate the cache.) Further, cache nonexistent git_attr_file data even when .gitattributes files are not found to prevent re-scanning for nonexistent files.
6f73e026	2014-12-24T11:42:50	Plug some leaks
72d00241	2014-11-21T13:32:21	attr_file: Do not assume ODB data is NULL-terminated That's a bad assumption to make, even though right now it holds (because of the way we've implemented decompression of packfiles), this may change in the future, given that ODB objects can be binary data. Furthermore, the ODB object can return a NULL pointer if the object is empty. Copying the NULL pointer to the strbuf lets us handle it like an empty string. Again, the NULL pointer is valid behavior because you're supposed to check the size of the object before working on it.
6069042f	2014-11-05T16:51:39	ignore: don't leak rules into higher directories A rule "src" in src/.gitignore must only match subdirectories of src/. The current code does not include this context in the match rule and would thus consider this rule to match the top-level src/ directory instead of the intended src/src/. Keep track fo the context in which the rule was defined so we can perform a prefix match.
5c54e216	2014-11-05T16:07:07	ignore: consider files with a CR in their names We currently consider CR to start the end of the line, but that means that we miss cases with CR CR LF which can be used with git to match files whose names have CR at the end of their names. The fix from the patch comes from Russell's comment in the issue. This fixes #2536.
a0cacc82	2014-08-08T15:18:40	For negative matches, always use leading dir match
f25bc0b2	2014-08-08T14:51:36	Fix rejection of parent dir of negated ignores While scanning through a directory hierarchy, this prevents a positive ignore match on a parent directory from blocking the scan of a directory when a negative match rule exists for files inside the directory.
f554611a	2014-05-06T12:41:26	Improve checks for ignore containment The diff code was using an "ignored_prefix" directory to track if a parent directory was ignored that contained untracked files alongside tracked files. Unfortunately, when negative ignore rules were used for directories inside ignored parents, the wrong rules were applied to untracked files inside the negatively ignored child directories. This commit moves the logic for ignore containment into the workdir iterator (which is a better place for it), so the ignored-ness of a directory is contained in the frame stack during traversal. This allows a child directory to override with a negative ignore and yet still restore the ignored state of the parent when we traverse out of the child. Along with this, there are some problems with "directory only" ignore rules on container directories. Given "a/*" and "!a/b/c/" (where the second rule is a directory rule but the first rule is just a generic prefix rule), then the directory only constraint was having "a/b/c/d/file" match the first rule and not the second. This was fixed by having ignore directory-only rules test a rule against the prefix of a file with LEADINGDIR enabled. Lastly, spot checks for ignores using `git_ignore_path_is_ignored` were tested from the top directory down to the bottom to deal with the containment problem, but this is wrong. We have to test bottom to top so that negative subdirectory rules will be checked before parent ignore rules. This does change the behavior of some existing tests, but it seems only to bring us more in line with core Git, so I think those changes are acceptable.
17ef678c	2014-04-21T11:55:57	Fix some coverity-found issues
ac16bd0a	2014-04-18T15:45:59	Minor fixes Only apply LEADING_DIR pattern munging to patterns in ignore and attribute files, not to pathspecs used to select files to operate on. Also, allow internal macro definitions to be evaluated before loading all external ones (important so that external ones can make use of internal `binary` definition).
916fcbd6	2014-04-18T14:42:40	Fix ignore difference from git with trailing /* Ignore patterns that ended with a trailing '/' were still needing to match against another actual '/' character in the full path. This is not the same behavior as core Git. Instead, we strip a trailing '/' off of any patterns that were matching and just take it to imply the FNM_LEADING_DIR behavior.
e3a2a04c	2014-04-18T14:29:58	Preload attribute files that may contain macros There was a latent bug where files that use macro definitions could be parsed before the macro definitions were loaded. Because of attribute file caching, preloading files that are going to be used doesn't add a significant amount of overhead, so let's always preload any files that could contain macros before we assemble the actual vector of files to scan for attributes.
823c0e9c	2014-04-17T11:53:13	Fix broken logic for attr cache invalidation The checks to see if files were out of date in the attibute cache was wrong because the cache-breaker data wasn't getting stored correctly. Additionally, when the cache-breaker triggered, the old file data was being leaked.
7d490872	2014-04-10T22:31:01	Attribute file cache refactor This is a big refactoring of the attribute file cache to be a bit simpler which in turn makes it easier to enforce a lock around any updates to the cache so that it can be used in a threaded env. Tons of changes to the attributes and ignores code.
e6e8530a	2014-04-14T12:31:17	Lock attribute file while reparsing data I don't love this approach, but achieving thread-safety for attribute and ignore data while reloading files would require a larger rewrite in order to avoid this. If an attribute or ignore file is out of date, this holds a lock on the file while we are reloading the data so that another thread won't try to reload the data at the same time.
2e9d813b	2014-04-11T12:12:47	Fix tests with new attr cache code
40ed4990	2014-02-11T14:45:37	Add diff threading tests and attr file cache locks This adds a basic test of doing simultaneous diffs on multiple threads and adds basic locking for the attr file cache because that was the immediate problem that arose from these tests.
a9528b8f	2014-04-14T15:59:48	Fix core.excludesfile named .gitignore Ignore rules with slashes in them are matched using FNM_PATHNAME and use the path to the .gitignore file from the root of the repository along with the path fragment (including slashes) in the ignore file itself. Unfortunately, the relative path to the .gitignore file was being applied to the global core.excludesfile if that was also named ".gitignore". This fixes that with more precise matching and includes test for ignore rules with leading slashes (which were the primary example of this being broken in the real world). This also backports an improvement to the file context logic from the threadsafe-iterators branch where we don't rely on mutating the key of the attribute file name to generate the context path.
66566516	2013-09-08T17:15:42	Fix warning
4ba64794	2013-08-09T10:52:35	Revert PR #1462 and provide alternative fix This rolls back the changes to fnmatch parsing from commit 2e40a60e847d6c128af23e24ea7a8efebd2427da except for the tests that were added. Instead this adds couple of new flags that can be passed in when attempting to parse an fnmatch pattern. Also, this changes the pathspec match logic to special case matching a filename with a '!' prefix against a negative pattern. This fixes the build.
33d532dc	2013-08-09T09:32:06	Merge pull request #1462 from yorah/fix/libgit2sharp-issue-379 status: fix handling of filenames with special prefixes
22b6b82f	2013-06-20T12:16:06	Add status flags to force output sort order Files in status will, be default, be sorted according to the case insensitivity of the filesystem that we're running on. However, in some cases, this is not desirable. Even on case insensitive file systems, 'git status' at the command line will generally use a case sensitive sort (like 'ls'). Some GUIs prefer to display a list of file case insensitively even on case-sensitive platforms. This adds two new flags: GIT_STATUS_OPT_SORT_CASE_SENSITIVELY and GIT_STATUS_OPT_SORT_CASE_INSENSITIVELY that will override the default sort order of the status output and give the user control. This includes tests for exercising these new options and makes the examples/status.c program emulate core Git and always use a case sensitive sort.
2d160ef7	2013-05-29T16:03:30	allow (ignore) bare slash in gitignore
2e40a60e	2013-04-11T17:29:05	status: fix handling of filenames with special prefixes Fix libgit2/libgit2sharp#379
0d32f39e	2013-03-04T11:31:50	Notify '*' pathspec correctly when diffing I also moved all tests related to notifying in their own file.
5540d947	2013-03-15T16:39:00	Implement global/system file search paths The goal of this work is to expose the search logic for "global", "system", and "xdg" files through the git_libgit2_opts() interface. Behind the scenes, I changed the logic for finding files to have a notion of a git_strarray that represents a search path and to store a separate search path for each of the three tiers of config file. For each tier, I implemented a function to initialize it to default values (generally based on environment variables), and then general interfaces to get it, set it, reset it, and prepend new directories to it. Next, I exposed these interfaces through the git_libgit2_opts interface, reusing the GIT_CONFIG_LEVEL_SYSTEM, etc., constants for the user to control which search path they were modifying. There are alternative designs for the opts interface / argument ordering, so I'm putting this phase out for discussion. Additionally, I ended up doing a little bit of clean up regarding attr.h and attr_file.h, adding a new attrcache.h so the other two files wouldn't have to be included in so many places.
11d9f6b3	2013-01-27T14:17:07	Vector improvements and their fallout
f08c60a5	2012-09-17T16:10:42	Minor fixes for ignorecase support
ec40b7f9	2012-09-17T15:42:41	Support for core.ignorecase
ca1b6e54	2012-07-31T17:02:54	Add template dir and set gid to repo init This extends git_repository_init_ext further with support for initializing the repository from an external template directory and with support for the "create shared" type flags that make a set GID repository directory. This also adds tests for much of the new functionality to the existing `repo/init.c` test suite. Also, this adds a bunch of new utility functions including a very general purpose `git_futils_mkdir` (with the ability to make paths and to chmod the paths post-creation) and a file tree copying function `git_futils_cp_r`. Also, this includes some new path functions that were useful to keep the code simple.
e25dda51	2012-08-02T01:38:30	Merge remote-tracking branch 'nulltoken/topic/amd64-compat' into development Conflicts: src/netops.c src/netops.h src/oid.c
0c9eacf3	2012-08-02T01:15:24	attr: Do not export variables externally Fixes #824 Exporting variables in a dynamic library is a PITA. Let's keep these values internally and wrap them through a helper method. This doesn't break the external API. @arrbee, aren't you glad I turned the `GIT_ATTR_` macros into function macros? :sparkles:
b8457baa	2012-07-24T07:57:58	portability: Improve x86/amd64 compatibility
02a0d651	2012-07-12T16:31:59	Add git_buf_unescape and git__unescape to unescape all characters in a string (in-place)
227f3131	2012-07-15T14:11:58	attr: Rename the `git_attr__` exports Pevents collisions with the original libgit, which also exports those exact symbols. Fixes #822
2a99df69	2012-05-24T17:14:56	Fix bugs for status with spaces and reloaded attrs This fixes two bugs: * Issue #728 where git_status_file was not working for files that contain spaces. This was caused by reusing the "fnmatch" parsing code from ignore and attribute files to interpret the "pathspec" that constrained the files to apply the status to. In that code, unescaped whitespace was considered terminal to the pattern, so a file with internal whitespace was excluded from the matched files. The fix was to add a mode to that code that allows spaces and tabs inside patterns. This mode only comes into play when parsing in-memory strings. * The other issue was undetected, but it was in the recently added code to reload gitattributes / gitignores when they were changed on disk. That code was not clearing out the old values from the cached file content before reparsing which meant that newly added patterns would be read in, but deleted patterns would not be removed. The fix was to clear the vector of patterns in a cached file before reparsing the file.
904b67e6	2012-05-18T01:48:50	errors: Rename error codes
e172cf08	2012-05-18T01:21:06	errors: Rename the generic return codes
41a82592	2012-05-15T14:17:39	Ranged iterators and rewritten git_status_file The goal of this work is to rewrite git_status_file to use the same underlying code as git_status_foreach. This is done in 3 phases: 1. Extend iterators to allow ranged iteration with start and end prefixes for the range of file names to be covered. 2. Improve diff so that when there is a pathspec and there is a common non-wildcard prefix of the pathspec, it will use ranged iterators to minimize excess iteration. 3. Rewrite git_status_file to call git_status_foreach_ext with a pathspec that covers just the one file being checked. Since ranged iterators underlie the status & diff implementation, this is actually fairly efficient. The workdir iterator does end up loading the contents of all the directories down to the single file, which should ideally be avoided, but it is pretty good.
2aa1e94d	2012-05-09T10:30:34	Fix 64-bit build warning
0f49200c	2012-05-09T04:37:02	msvc: Do not use `isspace` Locale-aware bullshit bitting my ass again yo
f917481e	2012-05-03T16:37:25	Support reading attributes from index Depending on the operation, we need to consider gitattributes in both the work dir and the index. This adds a parameter to all of the gitattributes related functions that allows user control of attribute reading behavior (i.e. prefer workdir, prefer index, only use index). This fix also covers allowing us to check attributes (and hence do diff and status) on bare repositories. This was a somewhat larger change that I hoped because it had to change the cache key used for gitattributes files.
821f6bc7	2012-04-26T13:04:54	Fix Win32 warnings
d58336dd	2012-04-26T10:51:45	Fix leading slash behavior in attrs/ignores We were not following the git behavior for leading slashes in path names when matching git ignores and git attribute file patterns. This should fix issue #638.
01fed0a8	2012-04-25T10:36:01	Convert hashtable usage over to khash This updates khash.h with some extra features (like error checking on allocations, ability to use wrapped malloc, foreach calls, etc), creates two high-level wrappers around khash: `git_khash_str` and `git_khash_oid` for string-to-void-ptr and oid-to-void-ptr tables, then converts all of the old usage of `git_hashtable` over to use these new hashtables. For `git_khash_str`, I've tried to create a set of macros that yield an API not too unlike the old `git_hashtable` API. Since the oid hashtable is only used in one file, I haven't bother to set up all those macros and just use the khash APIs directly for now.
19fa2bc1	2012-04-17T15:12:50	Convert attrs and diffs to use string pools This converts the git attr related code (including ignores) and the git diff related code (and implicitly the status code) to use `git_pools` for storing strings. This reduces the number of small blocks allocated dramatically.
14a513e0	2012-04-13T15:00:29	Add support for pathspec to diff and status This adds preliminary support for pathspecs to diff and status. The implementation is not very optimized (it still looks at every single file and evaluated the the pathspec match against them), but it works.
95dfb031	2012-03-30T14:40:50	Improve config handling for diff,submodules,attrs This adds support for a bunch of core.* settings that affect diff and status, plus fixes up some incorrect implementations of those settings from before. Also, this cleans up the handling of config settings in the new submodules code and in the old attrs/ignore code.
0d0fa7c3	2012-03-16T15:56:01	Convert attr, ignore, mwindow, status to new errors Also cleaned up some previously converted code that still had little things to polish.
ab43ad2f	2012-03-14T11:07:14	Convert attr and other files to new errors This continues to add other files to the new error handling style. I think the only real concerns here are that there are a couple of error return cases that I have converted to asserts, but I think that it was the correct thing to do given the new error style.
ae9e29fd	2012-03-06T16:14:31	Migrating diff to new error handling Ended up migrating a bunch of upstream functions as well including vector, attr_file, and odb in order to get this to work right.
1a481123	2012-02-17T00:13:34	error-handling: References Yes, this is error handling solely for `refs.c`, but some of the abstractions leak all ofer the code base.
c63793ee	2012-03-02T03:51:45	attr: Change the attribute check macros The point of having `GIT_ATTR_TRUE` and `GIT_ATTR_FALSE` macros is to be able to change the way that true and false values are stored inside of the returned gitattributes value pointer. However, if these macros are implemented as a simple rename for the `git_attr__true` pointer, they will always be used with the `==` operator, and hence we cannot really change the implementation to any other way that doesn't imply using special pointer values and comparing them! We need to do the same thing that core Git does, which is using a function macro. With `GIT_ATTR_TRUE(attr)`, we can change internally the way that these values are stored to anything we want. This commit does that, and rewrites a large chunk of the attributes test suite to remove duplicated code for expected attributes, and to properly test the function macro behavior instead of comparing pointers.
13224ea4	2012-02-27T04:28:31	buffer: Unify `git_fbuffer` and `git_buf` This makes so much sense that I can't believe it hasn't been done before. Kill the old `git_fbuffer` and read files straight into `git_buf` objects. Also: In order to fully support 4GB files in 32-bit systems, the `git_buf` implementation has been changed from using `ssize_t` for storage and storing negative values on allocation failure, to using `size_t` and changing the buffer pointer to a magical pointer on allocation failure. Hopefully this won't break anything.
e4eb94a2	2012-01-31T14:02:52	Fix issue with ignoring whole directories Now that is_dir is calculated correctly for attr/ignore paths, it is possible to use it so that ignoring "dir/" will properly match the directory name and ignore the entire directory.
adc9bdb3	2012-01-31T13:59:32	Fix attr path is_dir check When building an attr path object, the code that checks if the file is a directory was evaluating the file as a relative path to the current working directory, instead of using the repo root. This lead to inconsistent behavior.
63ab73be	2012-01-20T11:13:17	Merge branch 'fix-subdir-attr-paths' into development This resolves issue #535 and issue #533.
1744fafe	2012-01-17T15:49:47	Move path related functions from fileops to path This takes all of the functions that look up simple data about paths (such as `git_futils_isdir`) and moves them over to path.h (becoming `git_path_isdir`). This leaves fileops.h just with functions that actually manipulate the filesystem or look at the file contents in some way. As part of this, the dir.h header which is really just for win32 support was moved into win32 (with some minor changes).
83bfbdf5	2012-01-16T18:00:18	Remove poor git__removechar function Going back over this, the git__removechar function was not needed (only invoked once) and is actually mislabeled. As implemented, it really only made sense for removing backslash characters, since two of the "removed" characters in a row would include the second one -- i.e. it really implements stripping backslash-escaped strings where a backslash allows internal whitespace in a word.
a51cd8e6	2012-01-16T16:58:27	Fix handling of relative paths for attrs Per issue #533, the handling of relative paths in attribute and ignore files was not right. Fixed this by pre-joining the relative path of the attribute/ignore file onto the match string when a full path match is required. Unfortunately, fixing this required a bit more code than I would have liked because I had to juggle things around so that the fnmatch parser would have sufficient information to prepend the relative path when it was needed.
df743c7d	2012-01-09T15:37:19	Initial implementation of gitignore support Adds support for .gitignore files to git_status_foreach() and git_status_file(). This includes refactoring the gitattributes code to share logic where possible. The GIT_STATUS_IGNORED flag will now be passed in for files that are ignored (provided they are not already in the index or the head of repo).
bd370b14	2011-12-30T15:00:14	Improved gitattributes macro implementation This updates to implementation of gitattribute macros to be much more similar to core git (albeit not 100%) and to handle expansion of macros within macros, etc. It also cleans up the refcounting usage with macros to be much cleaner. Also, this adds a new vector function `git_vector_insert_sorted()` which allows you to maintain a sorted list as you go. In order to write that function, this changes the function `git__bsearch()` to take a somewhat different set of parameters, although the core functionality is still the same.
c6d2a2c0	2011-12-29T21:31:30	Fixed up memory leaks
73b51450	2011-12-28T23:28:50	Add support for macros and cache flush API. Add support for git attribute macro definitions. Also, add support for cache flush API to clear the attribute file content cache when needed. Additionally, improved the handling of global and system files, making common utility functions in fileops and converting config and attr to both use the common functions. Adds a bunch more tests and fixed some memory leaks. Note that adding macros required me to use refcounted attribute assignment definitions, which complicated, but probably improved memory usage.
ee1f0b1a	2011-12-16T10:56:43	Add APIs for git attributes This adds APIs for querying git attributes. In addition to the new API in include/git2/attr.h, most of the action is in src/attr_file.[hc] which contains utilities for dealing with a single attributes file, and src/attr.[hc] which contains the implementation of the APIs that merge all applicable attributes files.

34593aae

2015-05-12T17:00:25

attr: declare variable at top of block for msvc

90997e40

2015-05-12T12:14:55

attr: less path mangling during attribute matching When handling attr matching, simply compare the directory path where the attribute file resides to the path being matched. Skip over commonality to allow us to compare the contents of the attribute file to the remainder of the path. This allows us to more easily compare the pattern directly to the path, instead of trying to guess whether we want to compare the path's basename or the full path based on whether the match was inside a containing directory or not. This also allows us to do fewer translations on the pattern (trying to re-prefix it.)

9465bedb

2015-05-12T16:02:18

attr: don't mangle file path during attr matching When determining whether some file matches an attr pattern, do not try to truncate the path to pass to fnmatch. When there is no containing directory for an item (eg, from a .gitignore in the root) this will cause us to truncate our path, which means that we cannot do meaningful comparisons on it and we may have false positives when trying to determine whether a given file is actually a file or a folder (as we have lost the path's base information.) This mangling was to allow fnmatch to compare a directory on disk to the name of a directory, but it is unnecessary as our fnmatch accepts FNM_LEADING_DIR.

ef6d0722

2015-05-12T13:06:05

attr: don't match files for folders When ignoring a path "foo/", ensure that this is actually a directory, and not simply a file named "foo".

4c09e19a

2015-03-30T14:07:44

Improvements to ignore performance on Windows. Minimizing the number directory and file opens, minimizes the amount of IO thus reducing the overall cost of performing ignore operations.

c02a0e46

2015-04-17T18:27:28

attr_file: fix subdirectory attr case. Closes #2966.

f58cc280

2015-02-03T00:28:32

attr_session: keep a temp buffer

d4b1b767

2015-02-03T00:03:49

checkout: cache system attributes file location

9f779aac

2015-01-29T14:40:55

attrcache: don't re-read attrs during checkout During checkout, assume that the .gitattributes files aren't modified during the checkout. Instead, create an "attribute session" during checkout. Assume that attribute data read in the same checkout "session" hasn't been modified since the checkout started. (But allow subsequent checkouts to invalidate the cache.) Further, cache nonexistent git_attr_file data even when .gitattributes files are not found to prevent re-scanning for nonexistent files.

6f73e026

2014-12-24T11:42:50

Plug some leaks

72d00241

2014-11-21T13:32:21

attr_file: Do not assume ODB data is NULL-terminated That's a bad assumption to make, even though right now it holds (because of the way we've implemented decompression of packfiles), this may change in the future, given that ODB objects can be binary data. Furthermore, the ODB object can return a NULL pointer if the object is empty. Copying the NULL pointer to the strbuf lets us handle it like an empty string. Again, the NULL pointer is valid behavior because you're supposed to check the *size* of the object before working on it.

6069042f

2014-11-05T16:51:39

ignore: don't leak rules into higher directories A rule "src" in src/.gitignore must only match subdirectories of src/. The current code does not include this context in the match rule and would thus consider this rule to match the top-level src/ directory instead of the intended src/src/. Keep track fo the context in which the rule was defined so we can perform a prefix match.

5c54e216

2014-11-05T16:07:07

ignore: consider files with a CR in their names We currently consider CR to start the end of the line, but that means that we miss cases with CR CR LF which can be used with git to match files whose names have CR at the end of their names. The fix from the patch comes from Russell's comment in the issue. This fixes #2536.

a0cacc82

2014-08-08T15:18:40

For negative matches, always use leading dir match

f25bc0b2

2014-08-08T14:51:36

Fix rejection of parent dir of negated ignores While scanning through a directory hierarchy, this prevents a positive ignore match on a parent directory from blocking the scan of a directory when a negative match rule exists for files inside the directory.

f554611a

2014-05-06T12:41:26

Improve checks for ignore containment The diff code was using an "ignored_prefix" directory to track if a parent directory was ignored that contained untracked files alongside tracked files. Unfortunately, when negative ignore rules were used for directories inside ignored parents, the wrong rules were applied to untracked files inside the negatively ignored child directories. This commit moves the logic for ignore containment into the workdir iterator (which is a better place for it), so the ignored-ness of a directory is contained in the frame stack during traversal. This allows a child directory to override with a negative ignore and yet still restore the ignored state of the parent when we traverse out of the child. Along with this, there are some problems with "directory only" ignore rules on container directories. Given "a/*" and "!a/b/c/" (where the second rule is a directory rule but the first rule is just a generic prefix rule), then the directory only constraint was having "a/b/c/d/file" match the first rule and not the second. This was fixed by having ignore directory-only rules test a rule against the prefix of a file with LEADINGDIR enabled. Lastly, spot checks for ignores using `git_ignore_path_is_ignored` were tested from the top directory down to the bottom to deal with the containment problem, but this is wrong. We have to test bottom to top so that negative subdirectory rules will be checked before parent ignore rules. This does change the behavior of some existing tests, but it seems only to bring us more in line with core Git, so I think those changes are acceptable.

17ef678c

2014-04-21T11:55:57

Fix some coverity-found issues

ac16bd0a

2014-04-18T15:45:59

Minor fixes Only apply LEADING_DIR pattern munging to patterns in ignore and attribute files, not to pathspecs used to select files to operate on. Also, allow internal macro definitions to be evaluated before loading all external ones (important so that external ones can make use of internal `binary` definition).

916fcbd6

2014-04-18T14:42:40

Fix ignore difference from git with trailing /* Ignore patterns that ended with a trailing '/*' were still needing to match against another actual '/' character in the full path. This is not the same behavior as core Git. Instead, we strip a trailing '/*' off of any patterns that were matching and just take it to imply the FNM_LEADING_DIR behavior.

e3a2a04c

2014-04-18T14:29:58

Preload attribute files that may contain macros There was a latent bug where files that use macro definitions could be parsed before the macro definitions were loaded. Because of attribute file caching, preloading files that are going to be used doesn't add a significant amount of overhead, so let's always preload any files that could contain macros before we assemble the actual vector of files to scan for attributes.

823c0e9c

2014-04-17T11:53:13

Fix broken logic for attr cache invalidation The checks to see if files were out of date in the attibute cache was wrong because the cache-breaker data wasn't getting stored correctly. Additionally, when the cache-breaker triggered, the old file data was being leaked.

7d490872

2014-04-10T22:31:01

Attribute file cache refactor This is a big refactoring of the attribute file cache to be a bit simpler which in turn makes it easier to enforce a lock around any updates to the cache so that it can be used in a threaded env. Tons of changes to the attributes and ignores code.

e6e8530a

2014-04-14T12:31:17

Lock attribute file while reparsing data I don't love this approach, but achieving thread-safety for attribute and ignore data while reloading files would require a larger rewrite in order to avoid this. If an attribute or ignore file is out of date, this holds a lock on the file while we are reloading the data so that another thread won't try to reload the data at the same time.

2e9d813b

2014-04-11T12:12:47

Fix tests with new attr cache code

40ed4990

2014-02-11T14:45:37

Add diff threading tests and attr file cache locks This adds a basic test of doing simultaneous diffs on multiple threads and adds basic locking for the attr file cache because that was the immediate problem that arose from these tests.

a9528b8f

2014-04-14T15:59:48

Fix core.excludesfile named .gitignore Ignore rules with slashes in them are matched using FNM_PATHNAME and use the path to the .gitignore file from the root of the repository along with the path fragment (including slashes) in the ignore file itself. Unfortunately, the relative path to the .gitignore file was being applied to the global core.excludesfile if that was also named ".gitignore". This fixes that with more precise matching and includes test for ignore rules with leading slashes (which were the primary example of this being broken in the real world). This also backports an improvement to the file context logic from the threadsafe-iterators branch where we don't rely on mutating the key of the attribute file name to generate the context path.

66566516

2013-09-08T17:15:42

Fix warning

4ba64794

2013-08-09T10:52:35

Revert PR #1462 and provide alternative fix This rolls back the changes to fnmatch parsing from commit 2e40a60e847d6c128af23e24ea7a8efebd2427da except for the tests that were added. Instead this adds couple of new flags that can be passed in when attempting to parse an fnmatch pattern. Also, this changes the pathspec match logic to special case matching a filename with a '!' prefix against a negative pattern. This fixes the build.

33d532dc

2013-08-09T09:32:06

Merge pull request #1462 from yorah/fix/libgit2sharp-issue-379 status: fix handling of filenames with special prefixes

22b6b82f

2013-06-20T12:16:06

Add status flags to force output sort order Files in status will, be default, be sorted according to the case insensitivity of the filesystem that we're running on. However, in some cases, this is not desirable. Even on case insensitive file systems, 'git status' at the command line will generally use a case sensitive sort (like 'ls'). Some GUIs prefer to display a list of file case insensitively even on case-sensitive platforms. This adds two new flags: GIT_STATUS_OPT_SORT_CASE_SENSITIVELY and GIT_STATUS_OPT_SORT_CASE_INSENSITIVELY that will override the default sort order of the status output and give the user control. This includes tests for exercising these new options and makes the examples/status.c program emulate core Git and always use a case sensitive sort.

2d160ef7

2013-05-29T16:03:30

allow (ignore) bare slash in gitignore

2e40a60e

2013-04-11T17:29:05

status: fix handling of filenames with special prefixes Fix libgit2/libgit2sharp#379

0d32f39e

2013-03-04T11:31:50

Notify '*' pathspec correctly when diffing I also moved all tests related to notifying in their own file.

5540d947

2013-03-15T16:39:00

Implement global/system file search paths The goal of this work is to expose the search logic for "global", "system", and "xdg" files through the git_libgit2_opts() interface. Behind the scenes, I changed the logic for finding files to have a notion of a git_strarray that represents a search path and to store a separate search path for each of the three tiers of config file. For each tier, I implemented a function to initialize it to default values (generally based on environment variables), and then general interfaces to get it, set it, reset it, and prepend new directories to it. Next, I exposed these interfaces through the git_libgit2_opts interface, reusing the GIT_CONFIG_LEVEL_SYSTEM, etc., constants for the user to control which search path they were modifying. There are alternative designs for the opts interface / argument ordering, so I'm putting this phase out for discussion. Additionally, I ended up doing a little bit of clean up regarding attr.h and attr_file.h, adding a new attrcache.h so the other two files wouldn't have to be included in so many places.

11d9f6b3

2013-01-27T14:17:07

Vector improvements and their fallout

f08c60a5

2012-09-17T16:10:42

Minor fixes for ignorecase support

ec40b7f9

2012-09-17T15:42:41

Support for core.ignorecase

ca1b6e54

2012-07-31T17:02:54

Add template dir and set gid to repo init This extends git_repository_init_ext further with support for initializing the repository from an external template directory and with support for the "create shared" type flags that make a set GID repository directory. This also adds tests for much of the new functionality to the existing `repo/init.c` test suite. Also, this adds a bunch of new utility functions including a very general purpose `git_futils_mkdir` (with the ability to make paths and to chmod the paths post-creation) and a file tree copying function `git_futils_cp_r`. Also, this includes some new path functions that were useful to keep the code simple.

e25dda51

2012-08-02T01:38:30

Merge remote-tracking branch 'nulltoken/topic/amd64-compat' into development Conflicts: src/netops.c src/netops.h src/oid.c

0c9eacf3

2012-08-02T01:15:24

attr: Do not export variables externally Fixes #824 Exporting variables in a dynamic library is a PITA. Let's keep these values internally and wrap them through a helper method. This doesn't break the external API. @arrbee, aren't you glad I turned the `GIT_ATTR_` macros into function macros? :sparkles:

b8457baa

2012-07-24T07:57:58

portability: Improve x86/amd64 compatibility

02a0d651

2012-07-12T16:31:59

Add git_buf_unescape and git__unescape to unescape all characters in a string (in-place)

227f3131

2012-07-15T14:11:58

attr: Rename the `git_attr__` exports Pevents collisions with the original libgit, which also exports those exact symbols. Fixes #822

2a99df69

2012-05-24T17:14:56

Fix bugs for status with spaces and reloaded attrs This fixes two bugs: * Issue #728 where git_status_file was not working for files that contain spaces. This was caused by reusing the "fnmatch" parsing code from ignore and attribute files to interpret the "pathspec" that constrained the files to apply the status to. In that code, unescaped whitespace was considered terminal to the pattern, so a file with internal whitespace was excluded from the matched files. The fix was to add a mode to that code that allows spaces and tabs inside patterns. This mode only comes into play when parsing in-memory strings. * The other issue was undetected, but it was in the recently added code to reload gitattributes / gitignores when they were changed on disk. That code was not clearing out the old values from the cached file content before reparsing which meant that newly added patterns would be read in, but deleted patterns would not be removed. The fix was to clear the vector of patterns in a cached file before reparsing the file.

904b67e6

2012-05-18T01:48:50

errors: Rename error codes

e172cf08

2012-05-18T01:21:06

errors: Rename the generic return codes

41a82592

2012-05-15T14:17:39

Ranged iterators and rewritten git_status_file The goal of this work is to rewrite git_status_file to use the same underlying code as git_status_foreach. This is done in 3 phases: 1. Extend iterators to allow ranged iteration with start and end prefixes for the range of file names to be covered. 2. Improve diff so that when there is a pathspec and there is a common non-wildcard prefix of the pathspec, it will use ranged iterators to minimize excess iteration. 3. Rewrite git_status_file to call git_status_foreach_ext with a pathspec that covers just the one file being checked. Since ranged iterators underlie the status & diff implementation, this is actually fairly efficient. The workdir iterator does end up loading the contents of all the directories down to the single file, which should ideally be avoided, but it is pretty good.

2aa1e94d

2012-05-09T10:30:34

Fix 64-bit build warning

0f49200c

2012-05-09T04:37:02

msvc: Do not use `isspace` Locale-aware bullshit bitting my ass again yo

f917481e

2012-05-03T16:37:25

Support reading attributes from index Depending on the operation, we need to consider gitattributes in both the work dir and the index. This adds a parameter to all of the gitattributes related functions that allows user control of attribute reading behavior (i.e. prefer workdir, prefer index, only use index). This fix also covers allowing us to check attributes (and hence do diff and status) on bare repositories. This was a somewhat larger change that I hoped because it had to change the cache key used for gitattributes files.

821f6bc7

2012-04-26T13:04:54

Fix Win32 warnings

d58336dd

2012-04-26T10:51:45

Fix leading slash behavior in attrs/ignores We were not following the git behavior for leading slashes in path names when matching git ignores and git attribute file patterns. This should fix issue #638.

01fed0a8

2012-04-25T10:36:01

Convert hashtable usage over to khash This updates khash.h with some extra features (like error checking on allocations, ability to use wrapped malloc, foreach calls, etc), creates two high-level wrappers around khash: `git_khash_str` and `git_khash_oid` for string-to-void-ptr and oid-to-void-ptr tables, then converts all of the old usage of `git_hashtable` over to use these new hashtables. For `git_khash_str`, I've tried to create a set of macros that yield an API not too unlike the old `git_hashtable` API. Since the oid hashtable is only used in one file, I haven't bother to set up all those macros and just use the khash APIs directly for now.

19fa2bc1

2012-04-17T15:12:50

Convert attrs and diffs to use string pools This converts the git attr related code (including ignores) and the git diff related code (and implicitly the status code) to use `git_pools` for storing strings. This reduces the number of small blocks allocated dramatically.

14a513e0

2012-04-13T15:00:29

Add support for pathspec to diff and status This adds preliminary support for pathspecs to diff and status. The implementation is not very optimized (it still looks at every single file and evaluated the the pathspec match against them), but it works.

95dfb031

2012-03-30T14:40:50

Improve config handling for diff,submodules,attrs This adds support for a bunch of core.* settings that affect diff and status, plus fixes up some incorrect implementations of those settings from before. Also, this cleans up the handling of config settings in the new submodules code and in the old attrs/ignore code.

0d0fa7c3

2012-03-16T15:56:01

Convert attr, ignore, mwindow, status to new errors Also cleaned up some previously converted code that still had little things to polish.

ab43ad2f

2012-03-14T11:07:14

Convert attr and other files to new errors This continues to add other files to the new error handling style. I think the only real concerns here are that there are a couple of error return cases that I have converted to asserts, but I think that it was the correct thing to do given the new error style.

ae9e29fd

2012-03-06T16:14:31

Migrating diff to new error handling Ended up migrating a bunch of upstream functions as well including vector, attr_file, and odb in order to get this to work right.

1a481123

2012-02-17T00:13:34

error-handling: References Yes, this is error handling solely for `refs.c`, but some of the abstractions leak all ofer the code base.

c63793ee

2012-03-02T03:51:45

attr: Change the attribute check macros The point of having `GIT_ATTR_TRUE` and `GIT_ATTR_FALSE` macros is to be able to change the way that true and false values are stored inside of the returned gitattributes value pointer. However, if these macros are implemented as a simple rename for the `git_attr__true` pointer, they will always be used with the `==` operator, and hence we cannot really change the implementation to any other way that doesn't imply using special pointer values and comparing them! We need to do the same thing that core Git does, which is using a function macro. With `GIT_ATTR_TRUE(attr)`, we can change internally the way that these values are stored to anything we want. This commit does that, and rewrites a large chunk of the attributes test suite to remove duplicated code for expected attributes, and to properly test the function macro behavior instead of comparing pointers.

13224ea4

2012-02-27T04:28:31

buffer: Unify `git_fbuffer` and `git_buf` This makes so much sense that I can't believe it hasn't been done before. Kill the old `git_fbuffer` and read files straight into `git_buf` objects. Also: In order to fully support 4GB files in 32-bit systems, the `git_buf` implementation has been changed from using `ssize_t` for storage and storing negative values on allocation failure, to using `size_t` and changing the buffer pointer to a magical pointer on allocation failure. Hopefully this won't break anything.

e4eb94a2

2012-01-31T14:02:52

Fix issue with ignoring whole directories Now that is_dir is calculated correctly for attr/ignore paths, it is possible to use it so that ignoring "dir/" will properly match the directory name and ignore the entire directory.

adc9bdb3

2012-01-31T13:59:32

Fix attr path is_dir check When building an attr path object, the code that checks if the file is a directory was evaluating the file as a relative path to the current working directory, instead of using the repo root. This lead to inconsistent behavior.

63ab73be

2012-01-20T11:13:17

Merge branch 'fix-subdir-attr-paths' into development This resolves issue #535 and issue #533.

1744fafe

2012-01-17T15:49:47

Move path related functions from fileops to path This takes all of the functions that look up simple data about paths (such as `git_futils_isdir`) and moves them over to path.h (becoming `git_path_isdir`). This leaves fileops.h just with functions that actually manipulate the filesystem or look at the file contents in some way. As part of this, the dir.h header which is really just for win32 support was moved into win32 (with some minor changes).

83bfbdf5

2012-01-16T18:00:18

Remove poor git__removechar function Going back over this, the git__removechar function was not needed (only invoked once) and is actually mislabeled. As implemented, it really only made sense for removing backslash characters, since two of the "removed" characters in a row would include the second one -- i.e. it really implements stripping backslash-escaped strings where a backslash allows internal whitespace in a word.

a51cd8e6

2012-01-16T16:58:27

Fix handling of relative paths for attrs Per issue #533, the handling of relative paths in attribute and ignore files was not right. Fixed this by pre-joining the relative path of the attribute/ignore file onto the match string when a full path match is required. Unfortunately, fixing this required a bit more code than I would have liked because I had to juggle things around so that the fnmatch parser would have sufficient information to prepend the relative path when it was needed.

df743c7d

2012-01-09T15:37:19

Initial implementation of gitignore support Adds support for .gitignore files to git_status_foreach() and git_status_file(). This includes refactoring the gitattributes code to share logic where possible. The GIT_STATUS_IGNORED flag will now be passed in for files that are ignored (provided they are not already in the index or the head of repo).

bd370b14

2011-12-30T15:00:14

Improved gitattributes macro implementation This updates to implementation of gitattribute macros to be much more similar to core git (albeit not 100%) and to handle expansion of macros within macros, etc. It also cleans up the refcounting usage with macros to be much cleaner. Also, this adds a new vector function `git_vector_insert_sorted()` which allows you to maintain a sorted list as you go. In order to write that function, this changes the function `git__bsearch()` to take a somewhat different set of parameters, although the core functionality is still the same.

c6d2a2c0

2011-12-29T21:31:30

Fixed up memory leaks

73b51450

2011-12-28T23:28:50

Add support for macros and cache flush API. Add support for git attribute macro definitions. Also, add support for cache flush API to clear the attribute file content cache when needed. Additionally, improved the handling of global and system files, making common utility functions in fileops and converting config and attr to both use the common functions. Adds a bunch more tests and fixed some memory leaks. Note that adding macros required me to use refcounted attribute assignment definitions, which complicated, but probably improved memory usage.

ee1f0b1a

2011-12-16T10:56:43

Add APIs for git attributes This adds APIs for querying git attributes. In addition to the new API in include/git2/attr.h, most of the action is in src/attr_file.[hc] which contains utilities for dealing with a single attributes file, and src/attr.[hc] which contains the implementation of the APIs that merge all applicable attributes files.

thodg/libgit2/src/attr_file.c

src/attr_file.c

Log