kmx git

Commit	Date	Message
ecf4f33a	2018-02-08T11:14:48	Convert usage of `git_buf_free` to new `git_buf_dispose`
c8ee5270	2017-12-08T09:05:58	pack: rename `git_packfile_stream_free` The function `git_packfile_stream_free` frees all state of the packfile stream without freeing the structure itself. This naming makes it hard to spot whether it will try to free the pointer itself or not, causing potential future errors. Due to this reason, we have decided to name a function freeing state without freeing the actual struture a "dispose" function. Rename `git_packfile_stream_free` to `git_packfile_stream_dispose` as a first example following this rule.
c3514b0b	2017-12-23T14:59:07	Fix unpack double free If an element has been cached, but then the call to packfile_unpack_compressed() fails, the very next thing that happens is that its data is freed and then the element is not removed from the cache, which frees the data again. This change sets obj->data to NULL to avoid the double-free. It also stops trying to resolve deltas after two continuous failed rounds of resolution, and adds a test for this.
53f2c6b1	2017-12-15T15:01:50	Simplified overflow condition
e7fac2af	2017-12-09T05:26:27	Using unsigned instead
28662c13	2017-12-08T06:00:27	libFuzzer: Prevent a potential shift overflow The type of \|base_offset\| in get_delta_base() is `git_off_t`, which is a signed `long`. That means that we need to make sure that the 8 most significant bits are zero (instead of 7) to avoid an overflow when it is shifted by 7 bits. Found using libFuzzer.
1560b580	2017-08-15T10:35:47	Merge pull request #4288 from pks-t/pks/include-fixups Include fixups
9842b327	2017-08-09T16:47:14	sha1_lookup: drop sha1_entry_pos function This was pulled over from git.git, and is an experiment in making binary-searching lists of sha1s faster. It was never compiled by default (nor was it used upstream by default without a special environment variable). Unfortunately, it is actually slower in practice, and upstream is planning to drop it in git/git@f1068efefe6dd3beaa89484db5e2db730b094e0b (which has some timing results). It's worth doing the same here for simplicity.
0c7f49dd	2017-06-30T13:39:01	Make sure to always include "common.h" first Next to including several files, our "common.h" header also declares various macros which are then used throughout the project. As such, we have to make sure to always include this file first in all implementation files. Otherwise, we might encounter problems or even silent behavioural differences due to macros or defines not being defined as they should be. So in fact, our header and implementation files should make sure to always include "common.h" first. This commit does so by establishing a common include pattern. Header files inside of "src" will now always include "common.h" as its first other file, separated by a newline from all the other includes to make it stand out as special. There are two cases for the implementation files. If they do have a matching header file, they will always include this one first, leading to "common.h" being transitively included as first file. If they do not have a matching header file, they instead include "common.h" as first file themselves. This fixes the outlined problems and will become our standard practice for header and source files inside of the "src/" from now on.
a693b873	2017-06-07T10:20:44	buffer: use `git_buf_init` with length The `git_buf_init` function has an optional length parameter, which will cause the buffer to be initialized and allocated in one step. This can be used instead of static initialization with `GIT_BUF_INIT` followed by a `git_buf_grow`. This patch does so for two functions where it is applicable.
97eb5ef0	2017-06-07T10:05:54	buffer: rely on `GITERR_OOM` set by `git_buf_try_grow` The function `git_buf_try_grow` consistently calls `giterr_set_oom` whenever growing the buffer fails due to insufficient memory being available. So in fact, we do not have to do this ourselves when a call to any buffer-growing function has failed due to an OOM situation. But we still do so in two functions, which this patch cleans up.
685f2251	2017-02-22T09:29:00	pack: fix looping over cache entries Fixes a regression from #4092. This is a crash on 32-bit and I assume that it doesn't do the right thing on 64-bit either. MSVC emits a warning for this, but of course, it's easy to get lost among all of the similar 'possible loss of data' warnings.
8f5fe903	2017-02-02T11:58:48	offmap: remove GIT__USE_OFFMAP macro
0d716905	2017-01-27T15:23:15	oidmap: remove GIT__USE_OIDMAP macro
85d2748c	2017-01-27T14:05:10	khash: avoid using `kh_key`/`kh_val` as lvalue
f31cb45a	2017-01-25T15:31:12	khash: avoid using `kh_put` directly
a8cd560b	2017-01-25T14:41:17	khash: avoid using `kh_del` directly
cb18386f	2017-01-25T14:26:58	khash: avoid using `kh_val`/`kh_value` directly
a853c527	2017-01-25T14:14:32	khash: avoid using `kh_get` directly
64e46dc3	2017-01-25T14:14:12	khash: avoid using `kh_end` directly
036daa59	2017-01-25T14:11:42	khash: use `git_map_exists` where applicable
9694d9ba	2017-01-25T14:09:17	khash: avoid using `kh_foreach`/`kh_foreach_value` directly
bf339ab0	2017-01-21T14:51:31	indexer: introduce `git_packfile_close` Encapsulation!
909d5494	2016-12-29T12:25:15	giterr_set: consistent error messages Error messages should be sentence fragments, and therefore: 1. Should not begin with a capital letter, 2. Should not conclude with punctuation, and 3. Should not end a sentence and begin a new one
903955f7	2016-12-19T17:26:09	Merge pull request #4027 from pks-t/pks/pack-deref-cache-on-error pack: dereference cached pack entry on error
ff5eea06	2016-12-12T09:36:15	pack: dereference cached pack entry on error When trying to uncompress deltas in a packfile's delta chain, we try to add object bases to the packfile cache, subsequently decrementing its reference count if it has been added successfully. This may lead to a mismatched reference count in the case where we exit the loop early due to an encountered error. Fix the issue by decrementing the reference count in error cleanup.
34b32053	2016-11-25T15:02:34	Fix potential use of uninitialized values
0cf15e39	2016-11-02T12:23:12	pack: fix race in pack_entry_find_offset In `pack_entry_find_offset`, we try to find the offset of a certain object in the pack file. To do so, we first assert if the packfile has already been opened and open it if not. Opening the packfile is guarded with a mutex, so concurrent access to this is in fact safe. What is not thread-safe though is our calculation of offsets inside the packfile. Assume two threads calling `pack_entry_find_offset` at the same time. We first calculate the offset and index location and only then determine if the pack has already been opened. If so, we re-calculate the offset and index address. Now the case for two threads: thread 1 first calculates the addresses and is subsequently suspended. The second thread will now call `pack_index_open` and initialize the pack file, calculating its addresses correctly. When the first thread is resumed now, he'll see that the pack file has already been initialized and will happily proceed with the addresses it has already calculated before the check. As the pack file was not initialized before, these addresses are bogus. Fix the issue by only calculating the addresses after having checked if the pack file is open.
6a2d2f8a	2015-06-17T06:42:20	delta: move delta application to delta.c Move the delta application functions into `delta.c`, next to the similar delta creation functions. Make the `git__delta_apply` functions adhere to other naming and parameter style within the library.
a97b769a	2016-04-27T12:00:31	odb: avoid inflating the full delta to read the header When we read the header, we want to know the size and type of the object. We're currently inflating the full delta in order to read the first few bytes. This can mean hundreds of kB needlessly inflated for large objects. Instead use a packfile stream to read just enough so we can read the two varints in the header and avoid inflating most of the delta.
d53cc13e	2016-03-31T04:12:46	Merge pull request #3575 from pmq20/master-13jan16 Remove duplicated calls to git_mwindow_close
e10144ae	2016-03-04T01:18:30	odb: improved not found error messages When looking up an abbreviated oid, show the actual (abbreviated) oid the caller passed instead of a full (but ambiguously truncated) oid.
6d97beb9	2016-02-25T15:46:59	pack: don't allow a negative offset
ea9e00cb	2016-02-23T18:15:43	pack: make sure we don't go out of bounds for extended entries A corrupt index might have data that tells us to go look past the end of the file for data. Catch these cases and return an appropriate error message.
a53d2e39	2016-02-09T09:58:56	pack: do not free passed in poiter on error The function `git_packfile_stream_open` tries to free the passed in stream when an error occurs. The only call site is `git_indexer_append`, though, which passes in the address of a stream struct which has not been allocated on the heap. Fix the issue by simply removing the call to free. In case of an error we did not allocate any memory yet and otherwise it should be the caller's responsibility to manage it's object's lifetime.
d4e4f272	2016-01-13T11:07:14	Remove duplicated calls to git_mwindow_close
b644e223	2016-01-13T11:02:38	Make packfile_unpack_compressed a private API
c369b379	2015-07-31T16:23:11	Remove extra semicolon outside of a function Without this change, compiling with gcc and pedantic generates warning: ISO C does not allow extra ‘;’ outside of a function.
878293f7	2015-06-10T10:44:14	pack: use git_buf when building the index name The way we currently do it depends on the subtlety of strlen vs sizeof and the fact that .pack is one longer than .idx. Let's use a git_buf so we can express the manipulation we want much more clearly.
38c10ecd	2015-05-16T19:00:50	indexer: don't look for the index we're creating When creating an index, know that we do not have an index for our own packfile, preventing some unnecessary file opens and error reporting.
b63b76e0	2014-10-12T11:42:31	Reorder some khash declarations Keep the definitions in the headers, while putting the declarations in the C files. Putting the function definitions in headers causes them to be duplicated if you include two headers with them.
5091aff7	2015-02-20T08:40:40	Merge pull request #2907 from jasonhaslam/git_packfile_unpack_race Fix race in git_packfile_unpack.
8588cb0c	2015-02-14T23:43:26	Fix race in git_packfile_unpack. Increment refcount of newly added cache entries just like existing entries looked up from the cache. Otherwise the new entry can be evicted from the cache and destroyed while it's still in use.
f1453c59	2015-02-12T12:19:37	Make our overflow check look more like gcc/clang's Make our overflow checking look more like gcc and clang's, so that we can substitute it out with the compiler instrinsics on platforms that support it. This means dropping the ability to pass `NULL` as an out parameter. As a result, the macros also get updated to reflect this as well.
392702ee	2015-02-09T23:41:13	allocations: test for overflow of requested size Introduce some helper macros to test integer overflow from arithmetic and set error message appropriately.
6f73e026	2014-12-24T11:42:50	Plug some leaks
ec7e680c	2014-11-20T12:07:55	Fix for misleading "missing delta bases" error - Fix #2721.
ea66215d	2014-10-26T10:29:19	Removed some useless variable assignments
e640a77c	2014-09-25T15:29:03	Silence uninitialized warning
5cd81bb3	2014-09-03T01:01:25	Several CppCat warnings fixed
b3d3459f	2014-08-26T15:09:47	pack: return the correct final offset The callers of git_packfile_unpack() expect the obj_offset argument to be set to the beginning of the next object. We were mistakenly returning the the offset of the object's data, which causes the CRC function to try to use the wrong offset. Set obj_offset to curpos instead of elem->offset to point to the next element and bring back expected behaviour.
5e0f47c3	2014-06-25T21:20:39	pack: free the new pack struct if we fail to insert If we fail to insert the packfile in the map, make sure to free it. This makes the free function only attempt to remove its mwindows from the global list if we have opened the packfile to avoid accessing the list unlocked.
b3b66c57	2014-06-18T17:13:12	Share packs across repository instances Opening the same repository multiple times will currently open the same file multiple times, as well as map the same region of the file multiple times. This is not necessary, as the packfile data is immutable. Instead of opening and closing packfiles directly, introduce an indirection and allocate packfiles globally. This does mean locking on each packfile open, but we already use this lock for the global mwindow list so it doesn't introduce a new contention point.
649214be	2014-05-15T19:59:05	pack: init the cache on packfile alloc When running multithreaded, it is not enough to check for the offmap allocation. Move the call to cache_init() to packfile allocation so we can be sure it is always allocated free of races. This fixes #2355.
c968ce2c	2014-05-12T02:01:05	pack: don't forget to cache the base object The base object is a good cache candidate, so we shouldn't forget to add it to the cache.
15bcced2	2014-05-11T05:31:22	pack: use stack allocation for smaller delta chains This avoid allocating the array on the heap for relatively small chains. The expected performance increase is sadly not really noticeable.
a3ffbf23	2014-05-11T03:50:34	pack: expose a cached delta base directly Instead of going through a special entry in the chain, let's pass it as an output parameter.
9dbd150f	2014-05-09T09:36:09	pack: simplify delta chain code The switch makes the loop somewhat unwieldy. Let's assume it's fine and perform the check when we're accessing the data. This makes our code look a lot more like git's.
b2559f47	2014-05-08T17:14:59	pack: preallocate a 64-element chain Dependency chains are often large and require a few reallocations. Allocate a 64-element chain before doing anything else to avoid allocations during the loop. This value comes from the stack-allocated one git uses. We still allocate this on the heap, but it does help performance a little bit.
e6d10c58	2014-05-08T16:24:54	pack: make sure not to leak the dep chain
a332e91c	2014-05-06T23:37:28	pack: use a cache for delta bases when unpacking Bring back the use of the delta base cache for unpacking objects. When generating the delta chain, we stop when we find a delta base in the pack's cache and use that as the starting point.
2acdf4b8	2014-05-06T19:20:33	pack: unpack using a loop We currently make use of recursive function calls to unpack an object, resolving the deltas as we come back down the chain. This means that we have unbounded stack growth as we look up objects in a pack. This is now done in two steps: first we figure out what the dependency chain is by looking up the delta bases until we reach a non-delta object, pushing the information we need onto a stack and then we pop from that stack and apply the deltas until there are no more left. This version of the code does not make use of the delta base cache so it is slower than what's in the mainline. A later commit will reintroduce it.
ae081739	2014-05-06T21:21:04	pack: do not repeat the same error message four times Repeating this error message makes it harder to find out where we actually are finding the error, and they don't really describe what we're trying to do.
86d5810b	2014-05-06T16:20:14	pack: remove misleading comment
8610487c	2014-01-23T23:28:28	Drop parsing pack filename SHA1 part, no one cares the filename
26c1cb91	2013-12-09T09:44:03	One more rename/cleanup for callback err functions
c7b3e1b3	2013-12-06T15:42:20	Some callback error check style cleanups I find this easier to read...
25e0b157	2013-12-06T15:07:57	Remove converting user error to GIT_EUSER This changes the behavior of callbacks so that the callback error code is not converted into GIT_EUSER and instead we propagate the return value through to the caller. Instead of using the giterr_capture and giterr_restore functions, we now rely on all functions to pass back the return value from a callback. To avoid having a return value with no error message, the user can call the public giterr_set_str or some such function to set an error message. There is a new helper 'giterr_set_callback' that functions can invoke after making a callback which ensures that some error message was set in case the callback did not set one. In places where the sign of the callback return value is meaningful (e.g. positive to skip, negative to abort), only the negative values are returned back to the caller, obviously, since the other values allow for continuing the loop. The hardest parts of this were in the checkout code where positive return values were overloaded as meaningful values for checkout. I fixed this by adding an output parameter to many of the internal checkout functions and removing the overload. This added some code, but it is probably a better implementation. There is some funkiness in the network code where user provided callbacks could be returning a positive or a negative value and we want to rely on that to cancel the loop. There are still a couple places where an user error might get turned into GIT_EUSER there, I think, though none exercised by the tests.
dab89f9b	2013-12-04T21:22:57	Further EUSER and error propagation fixes This continues auditing all the places where GIT_EUSER is being returned and making sure to clear any existing error using the new giterr_user_cancel helper. As a result, places that relied on intercepting GIT_EUSER but having the old error preserved also needed to be cleaned up to correctly stash and then retrieve the actual error. Additionally, as I encountered places where error codes were not being propagated correctly, I tried to fix them up. A number of those fixes are included in the this commit as well.
51a3dfb5	2013-11-01T16:31:02	pack: `__object_header` always returns unsigned values
3343b5ff	2013-10-31T22:59:42	Fix warning on win64
51e82492	2013-10-03T16:54:25	pack: move the object header function here
67591c8c	2013-08-14T10:28:01	sha1_lookup: do not use the "experimental" lookup mode
3a2d48d5	2013-07-25T14:54:19	Close p->mwf.fd only if necessary This fixes a regression introduced in revision 9d2f841a5d39fc25ce722a3904f6ebc9aa112222. Signed-off-by: Sven Strickroth <email@cs-ware.de>
050af8bb	2013-07-15T16:00:00	pack: fix memory leak in error path
1a42dd17	2013-05-31T14:13:11	Mutex init can fail It is obviously quite a serious problem if this happens, but mutex initialization can fail and we should detect it. It's a bit like a memory allocation failure, in that you're probably pretty screwed if this occurs, but at least we'll catch it.
f658dc43	2013-05-31T14:09:58	Zero memory for major objects before freeing By zeroing out the memory when we free larger objects (i.e. those that serve as collections of other data, such as repos, odb, refdb), I'm hoping that it will be easier for libgit2 bindings to find errors in their object management code.
0ddfcb40	2013-05-02T18:06:14	Switch to index_version as "git_pack_file is ready" flag We use p->index_map.data to check whether the struct has been set up and all the information about the index is stored there. This variable gets set up halfway through the setup process, however, and a thread can come along and use fields that haven't been written to yet. Crucially, pack_entry_find_offset() needs to read the index version (which is written after index_map) to know the offset and stride length to pass to sha1_entry_pos(). If these values are wrong, assertions in it will fail, as it will be reading bogus data. Make index_version the last field to be written and switch from using p->index_map.data to p->index_version as "git_pack_file is ready" flag as we can use it to know if every field has been written.
34bd5999	2013-05-02T17:14:05	Revert "Protect sha1_entry_pos call with mutex" This reverts commit 8c535f3f6879c6796d8107d7eb80dd8b2105621b.
8c535f3f	2013-05-02T03:34:56	Protect sha1_entry_pos call with mutex There is an occasional assertion failure in sha1_entry_pos from pack_entry_find_index when running threaded. Holding the mutex around the code that grabs the index_map data and processes it makes this assertion failure go away.
9d2f841a	2013-05-02T03:03:54	Add extra locking around packfile open We were still seeing a few issues in threaded access to packs. This adds extra locks around the opening of the mwindow to avoid a different race.
b7f167da	2013-04-29T13:52:12	Make git_oid_cmp public and add git_oid__cmp
38eef611	2013-04-16T14:19:27	Make indexer use shared packfile open code The indexer was creating a packfile object separately from the code in pack.c which was a problem since I put a call to git_mutex_init into just pack.c. This commit updates the pack function for creating a new pack object (i.e. git_packfile_check()) so that it can be used in both places and then makes indexer.c use the shared initialization routine. There are also a few minor formatting and warning message fixes.
5d2d21e5	2013-04-16T15:00:43	Consolidate packfile allocation further Rename git_packfile_check to git_packfile_alloc since it is now being used more in that capacity. Fix the various places that use it. Consolidate some repeated code in odb_pack.c related to the allocation of a new pack_backend.
53607868	2013-04-15T00:09:03	Further threading fixes This builds on the earlier thread safety work to make it so that setting the odb, index, refdb, or config for a repository is done in a threadsafe manner with minimized locking time. This is done by adding a lock to the repository object and using it to guard the assignment of the above listed pointers. The lock is only held to assign the pointer value. This also contains some minor fixes to the other work with pack files to reduce the time that locks are being held to and fix an apparently memory leak.
24c70804	2013-04-12T12:59:38	Add mutex around mapping and unmapping pack files When I was writing threading tests for the new cache, the main error I kept running into was a pack file having it's content unmapped underneath the running thread. This adds a lock around the routines that map and unmap the pack data so that threads can effectively reload the data when they need it. This also required reworking the error handling paths in a couple places in the code which I tried to make consistent.
0e040c03	2013-03-03T14:50:47	indexer: use a hashtable for keeping track of offsets These offsets are needed for REF_DELTA objects, which encode which object they use as a base, but not where it lies in the packfile, so we need a list. These objects are mostly from older packfiles, before OFS_DELTA was widely spread. The time spent in indexing these packfiles is greatly reduced, though remains above what git is able to do.
11d9f6b3	2013-01-27T14:17:07	Vector improvements and their fallout
aa3bf89d	2013-01-26T15:12:53	Fix a mutex leak in pack.c
9c62aaab	2013-01-14T17:42:12	pack: evict all of the pages at once Somewhat surprisingly, this can increase the speed considerably, as we don't bother trying to decide what to evict, and the most used entries are quickly back into the cache.
ed6648ba	2013-01-14T16:39:22	pack: evict objects from the cache in groups of eight This drops the cache eviction below libcrypto and zlib in the perf output. The number has been chosen empirically.
09e29e47	2013-01-12T19:31:07	pack: fixes to the cache The offset should be git_off_t, and we should check the return value of the mutex lock function.
96c9b9f0	2013-01-12T18:38:19	indexer: properly free the packfile resources The indexer needs to call the packfile's free function so it takes care of freeing the caches. We still need to close the mwf descriptor manually so we can rename the packfile into its final name on Windows.
80d647ad	2013-01-11T20:15:06	Revert "pack: packfile_free -> git_packfile_free and use it in the indexers" This reverts commit f289f886cb81bb570bed747053d5ebf8aba6bef7, which makes the tests fail on Windows. Revert until we can figure out a solution.
090d5e1f	2013-01-11T14:40:09	Fix MSVC compilation warnings
f289f886	2013-01-11T17:24:52	pack: packfile_free -> git_packfile_free and use it in the indexers It turns out the indexers have been ignoring the pack's free function and leaking data. Plug that.
c8f79c2b	2012-12-21T10:59:10	pack: abstract out the cache into its own functions
0ed75620	2012-12-21T13:46:48	pack: limit the amount of memory the base delta cache can use Currently limited to 16MB (like git) and to objects up to 1MB in size.
525d961c	2012-12-20T07:55:51	pack: refcount entries and add a mutex around cache access
c0f4a011	2012-12-19T16:48:12	pack: introduce a delta base cache Many delta bases are re-used. Cache them to avoid inflating the same data repeatedly. This version doesn't limit the amount of entries to store, so it can end up using a considerable amound of memory.

ecf4f33a

2018-02-08T11:14:48

Convert usage of `git_buf_free` to new `git_buf_dispose`

c8ee5270

2017-12-08T09:05:58

pack: rename `git_packfile_stream_free` The function `git_packfile_stream_free` frees all state of the packfile stream without freeing the structure itself. This naming makes it hard to spot whether it will try to free the pointer itself or not, causing potential future errors. Due to this reason, we have decided to name a function freeing state without freeing the actual struture a "dispose" function. Rename `git_packfile_stream_free` to `git_packfile_stream_dispose` as a first example following this rule.

c3514b0b

2017-12-23T14:59:07

Fix unpack double free If an element has been cached, but then the call to packfile_unpack_compressed() fails, the very next thing that happens is that its data is freed and then the element is not removed from the cache, which frees the data again. This change sets obj->data to NULL to avoid the double-free. It also stops trying to resolve deltas after two continuous failed rounds of resolution, and adds a test for this.

53f2c6b1

2017-12-15T15:01:50

Simplified overflow condition

e7fac2af

2017-12-09T05:26:27

Using unsigned instead

28662c13

2017-12-08T06:00:27

libFuzzer: Prevent a potential shift overflow The type of |base_offset| in get_delta_base() is `git_off_t`, which is a signed `long`. That means that we need to make sure that the 8 most significant bits are zero (instead of 7) to avoid an overflow when it is shifted by 7 bits. Found using libFuzzer.

1560b580

2017-08-15T10:35:47

Merge pull request #4288 from pks-t/pks/include-fixups Include fixups

9842b327

2017-08-09T16:47:14

sha1_lookup: drop sha1_entry_pos function This was pulled over from git.git, and is an experiment in making binary-searching lists of sha1s faster. It was never compiled by default (nor was it used upstream by default without a special environment variable). Unfortunately, it is actually slower in practice, and upstream is planning to drop it in git/git@f1068efefe6dd3beaa89484db5e2db730b094e0b (which has some timing results). It's worth doing the same here for simplicity.

0c7f49dd

2017-06-30T13:39:01

Make sure to always include "common.h" first Next to including several files, our "common.h" header also declares various macros which are then used throughout the project. As such, we have to make sure to always include this file first in all implementation files. Otherwise, we might encounter problems or even silent behavioural differences due to macros or defines not being defined as they should be. So in fact, our header and implementation files should make sure to always include "common.h" first. This commit does so by establishing a common include pattern. Header files inside of "src" will now always include "common.h" as its first other file, separated by a newline from all the other includes to make it stand out as special. There are two cases for the implementation files. If they do have a matching header file, they will always include this one first, leading to "common.h" being transitively included as first file. If they do not have a matching header file, they instead include "common.h" as first file themselves. This fixes the outlined problems and will become our standard practice for header and source files inside of the "src/" from now on.

a693b873

2017-06-07T10:20:44

buffer: use `git_buf_init` with length The `git_buf_init` function has an optional length parameter, which will cause the buffer to be initialized and allocated in one step. This can be used instead of static initialization with `GIT_BUF_INIT` followed by a `git_buf_grow`. This patch does so for two functions where it is applicable.

97eb5ef0

2017-06-07T10:05:54

buffer: rely on `GITERR_OOM` set by `git_buf_try_grow` The function `git_buf_try_grow` consistently calls `giterr_set_oom` whenever growing the buffer fails due to insufficient memory being available. So in fact, we do not have to do this ourselves when a call to any buffer-growing function has failed due to an OOM situation. But we still do so in two functions, which this patch cleans up.

685f2251

2017-02-22T09:29:00

pack: fix looping over cache entries Fixes a regression from #4092. This is a crash on 32-bit and I assume that it doesn't do the right thing on 64-bit either. MSVC emits a warning for this, but of course, it's easy to get lost among all of the similar 'possible loss of data' warnings.

8f5fe903

2017-02-02T11:58:48

offmap: remove GIT__USE_OFFMAP macro

0d716905

2017-01-27T15:23:15

oidmap: remove GIT__USE_OIDMAP macro

85d2748c

2017-01-27T14:05:10

khash: avoid using `kh_key`/`kh_val` as lvalue

f31cb45a

2017-01-25T15:31:12

khash: avoid using `kh_put` directly

a8cd560b

2017-01-25T14:41:17

khash: avoid using `kh_del` directly

cb18386f

2017-01-25T14:26:58

khash: avoid using `kh_val`/`kh_value` directly

a853c527

2017-01-25T14:14:32

khash: avoid using `kh_get` directly

64e46dc3

2017-01-25T14:14:12

khash: avoid using `kh_end` directly

036daa59

2017-01-25T14:11:42

khash: use `git_map_exists` where applicable

9694d9ba

2017-01-25T14:09:17

khash: avoid using `kh_foreach`/`kh_foreach_value` directly

bf339ab0

2017-01-21T14:51:31

indexer: introduce `git_packfile_close` Encapsulation!

909d5494

2016-12-29T12:25:15

giterr_set: consistent error messages Error messages should be sentence fragments, and therefore: 1. Should not begin with a capital letter, 2. Should not conclude with punctuation, and 3. Should not end a sentence and begin a new one

903955f7

2016-12-19T17:26:09

Merge pull request #4027 from pks-t/pks/pack-deref-cache-on-error pack: dereference cached pack entry on error

ff5eea06

2016-12-12T09:36:15

pack: dereference cached pack entry on error When trying to uncompress deltas in a packfile's delta chain, we try to add object bases to the packfile cache, subsequently decrementing its reference count if it has been added successfully. This may lead to a mismatched reference count in the case where we exit the loop early due to an encountered error. Fix the issue by decrementing the reference count in error cleanup.

34b32053

2016-11-25T15:02:34

Fix potential use of uninitialized values

0cf15e39

2016-11-02T12:23:12

pack: fix race in pack_entry_find_offset In `pack_entry_find_offset`, we try to find the offset of a certain object in the pack file. To do so, we first assert if the packfile has already been opened and open it if not. Opening the packfile is guarded with a mutex, so concurrent access to this is in fact safe. What is not thread-safe though is our calculation of offsets inside the packfile. Assume two threads calling `pack_entry_find_offset` at the same time. We first calculate the offset and index location and only then determine if the pack has already been opened. If so, we re-calculate the offset and index address. Now the case for two threads: thread 1 first calculates the addresses and is subsequently suspended. The second thread will now call `pack_index_open` and initialize the pack file, calculating its addresses correctly. When the first thread is resumed now, he'll see that the pack file has already been initialized and will happily proceed with the addresses it has already calculated before the check. As the pack file was not initialized before, these addresses are bogus. Fix the issue by only calculating the addresses after having checked if the pack file is open.

6a2d2f8a

2015-06-17T06:42:20

delta: move delta application to delta.c Move the delta application functions into `delta.c`, next to the similar delta creation functions. Make the `git__delta_apply` functions adhere to other naming and parameter style within the library.

a97b769a

2016-04-27T12:00:31

odb: avoid inflating the full delta to read the header When we read the header, we want to know the size and type of the object. We're currently inflating the full delta in order to read the first few bytes. This can mean hundreds of kB needlessly inflated for large objects. Instead use a packfile stream to read just enough so we can read the two varints in the header and avoid inflating most of the delta.

d53cc13e

2016-03-31T04:12:46

Merge pull request #3575 from pmq20/master-13jan16 Remove duplicated calls to git_mwindow_close

e10144ae

2016-03-04T01:18:30

odb: improved not found error messages When looking up an abbreviated oid, show the actual (abbreviated) oid the caller passed instead of a full (but ambiguously truncated) oid.

6d97beb9

2016-02-25T15:46:59

pack: don't allow a negative offset

ea9e00cb

2016-02-23T18:15:43

pack: make sure we don't go out of bounds for extended entries A corrupt index might have data that tells us to go look past the end of the file for data. Catch these cases and return an appropriate error message.

a53d2e39

2016-02-09T09:58:56

pack: do not free passed in poiter on error The function `git_packfile_stream_open` tries to free the passed in stream when an error occurs. The only call site is `git_indexer_append`, though, which passes in the address of a stream struct which has not been allocated on the heap. Fix the issue by simply removing the call to free. In case of an error we did not allocate any memory yet and otherwise it should be the caller's responsibility to manage it's object's lifetime.

d4e4f272

2016-01-13T11:07:14

Remove duplicated calls to git_mwindow_close

b644e223

2016-01-13T11:02:38

Make packfile_unpack_compressed a private API

c369b379

2015-07-31T16:23:11

Remove extra semicolon outside of a function Without this change, compiling with gcc and pedantic generates warning: ISO C does not allow extra ‘;’ outside of a function.

878293f7

2015-06-10T10:44:14

pack: use git_buf when building the index name The way we currently do it depends on the subtlety of strlen vs sizeof and the fact that .pack is one longer than .idx. Let's use a git_buf so we can express the manipulation we want much more clearly.

38c10ecd

2015-05-16T19:00:50

indexer: don't look for the index we're creating When creating an index, know that we do not have an index for our own packfile, preventing some unnecessary file opens and error reporting.

b63b76e0

2014-10-12T11:42:31

Reorder some khash declarations Keep the definitions in the headers, while putting the declarations in the C files. Putting the function definitions in headers causes them to be duplicated if you include two headers with them.

5091aff7

2015-02-20T08:40:40

Merge pull request #2907 from jasonhaslam/git_packfile_unpack_race Fix race in git_packfile_unpack.

8588cb0c

2015-02-14T23:43:26

Fix race in git_packfile_unpack. Increment refcount of newly added cache entries just like existing entries looked up from the cache. Otherwise the new entry can be evicted from the cache and destroyed while it's still in use.

f1453c59

2015-02-12T12:19:37

Make our overflow check look more like gcc/clang's Make our overflow checking look more like gcc and clang's, so that we can substitute it out with the compiler instrinsics on platforms that support it. This means dropping the ability to pass `NULL` as an out parameter. As a result, the macros also get updated to reflect this as well.

392702ee

2015-02-09T23:41:13

allocations: test for overflow of requested size Introduce some helper macros to test integer overflow from arithmetic and set error message appropriately.

6f73e026

2014-12-24T11:42:50

Plug some leaks

ec7e680c

2014-11-20T12:07:55

Fix for misleading "missing delta bases" error - Fix #2721.

ea66215d

2014-10-26T10:29:19

Removed some useless variable assignments

e640a77c

2014-09-25T15:29:03

Silence uninitialized warning

5cd81bb3

2014-09-03T01:01:25

Several CppCat warnings fixed

b3d3459f

2014-08-26T15:09:47

pack: return the correct final offset The callers of git_packfile_unpack() expect the obj_offset argument to be set to the beginning of the next object. We were mistakenly returning the the offset of the object's data, which causes the CRC function to try to use the wrong offset. Set obj_offset to curpos instead of elem->offset to point to the next element and bring back expected behaviour.

5e0f47c3

2014-06-25T21:20:39

pack: free the new pack struct if we fail to insert If we fail to insert the packfile in the map, make sure to free it. This makes the free function only attempt to remove its mwindows from the global list if we have opened the packfile to avoid accessing the list unlocked.

b3b66c57

2014-06-18T17:13:12

Share packs across repository instances Opening the same repository multiple times will currently open the same file multiple times, as well as map the same region of the file multiple times. This is not necessary, as the packfile data is immutable. Instead of opening and closing packfiles directly, introduce an indirection and allocate packfiles globally. This does mean locking on each packfile open, but we already use this lock for the global mwindow list so it doesn't introduce a new contention point.

649214be

2014-05-15T19:59:05

pack: init the cache on packfile alloc When running multithreaded, it is not enough to check for the offmap allocation. Move the call to cache_init() to packfile allocation so we can be sure it is always allocated free of races. This fixes #2355.

c968ce2c

2014-05-12T02:01:05

pack: don't forget to cache the base object The base object is a good cache candidate, so we shouldn't forget to add it to the cache.

15bcced2

2014-05-11T05:31:22

pack: use stack allocation for smaller delta chains This avoid allocating the array on the heap for relatively small chains. The expected performance increase is sadly not really noticeable.

a3ffbf23

2014-05-11T03:50:34

pack: expose a cached delta base directly Instead of going through a special entry in the chain, let's pass it as an output parameter.

9dbd150f

2014-05-09T09:36:09

pack: simplify delta chain code The switch makes the loop somewhat unwieldy. Let's assume it's fine and perform the check when we're accessing the data. This makes our code look a lot more like git's.

b2559f47

2014-05-08T17:14:59

pack: preallocate a 64-element chain Dependency chains are often large and require a few reallocations. Allocate a 64-element chain before doing anything else to avoid allocations during the loop. This value comes from the stack-allocated one git uses. We still allocate this on the heap, but it does help performance a little bit.

e6d10c58

2014-05-08T16:24:54

pack: make sure not to leak the dep chain

a332e91c

2014-05-06T23:37:28

pack: use a cache for delta bases when unpacking Bring back the use of the delta base cache for unpacking objects. When generating the delta chain, we stop when we find a delta base in the pack's cache and use that as the starting point.

2acdf4b8

2014-05-06T19:20:33

pack: unpack using a loop We currently make use of recursive function calls to unpack an object, resolving the deltas as we come back down the chain. This means that we have unbounded stack growth as we look up objects in a pack. This is now done in two steps: first we figure out what the dependency chain is by looking up the delta bases until we reach a non-delta object, pushing the information we need onto a stack and then we pop from that stack and apply the deltas until there are no more left. This version of the code does not make use of the delta base cache so it is slower than what's in the mainline. A later commit will reintroduce it.

ae081739

2014-05-06T21:21:04

pack: do not repeat the same error message four times Repeating this error message makes it harder to find out where we actually are finding the error, and they don't really describe what we're trying to do.

86d5810b

2014-05-06T16:20:14

pack: remove misleading comment

8610487c

2014-01-23T23:28:28

Drop parsing pack filename SHA1 part, no one cares the filename

26c1cb91

2013-12-09T09:44:03

One more rename/cleanup for callback err functions

c7b3e1b3

2013-12-06T15:42:20

Some callback error check style cleanups I find this easier to read...

25e0b157

2013-12-06T15:07:57

Remove converting user error to GIT_EUSER This changes the behavior of callbacks so that the callback error code is not converted into GIT_EUSER and instead we propagate the return value through to the caller. Instead of using the giterr_capture and giterr_restore functions, we now rely on all functions to pass back the return value from a callback. To avoid having a return value with no error message, the user can call the public giterr_set_str or some such function to set an error message. There is a new helper 'giterr_set_callback' that functions can invoke after making a callback which ensures that some error message was set in case the callback did not set one. In places where the sign of the callback return value is meaningful (e.g. positive to skip, negative to abort), only the negative values are returned back to the caller, obviously, since the other values allow for continuing the loop. The hardest parts of this were in the checkout code where positive return values were overloaded as meaningful values for checkout. I fixed this by adding an output parameter to many of the internal checkout functions and removing the overload. This added some code, but it is probably a better implementation. There is some funkiness in the network code where user provided callbacks could be returning a positive or a negative value and we want to rely on that to cancel the loop. There are still a couple places where an user error might get turned into GIT_EUSER there, I think, though none exercised by the tests.

dab89f9b

2013-12-04T21:22:57

Further EUSER and error propagation fixes This continues auditing all the places where GIT_EUSER is being returned and making sure to clear any existing error using the new giterr_user_cancel helper. As a result, places that relied on intercepting GIT_EUSER but having the old error preserved also needed to be cleaned up to correctly stash and then retrieve the actual error. Additionally, as I encountered places where error codes were not being propagated correctly, I tried to fix them up. A number of those fixes are included in the this commit as well.

51a3dfb5

2013-11-01T16:31:02

pack: `__object_header` always returns unsigned values

3343b5ff

2013-10-31T22:59:42

Fix warning on win64

51e82492

2013-10-03T16:54:25

pack: move the object header function here

67591c8c

2013-08-14T10:28:01

sha1_lookup: do not use the "experimental" lookup mode

3a2d48d5

2013-07-25T14:54:19

Close p->mwf.fd only if necessary This fixes a regression introduced in revision 9d2f841a5d39fc25ce722a3904f6ebc9aa112222. Signed-off-by: Sven Strickroth <email@cs-ware.de>

050af8bb

2013-07-15T16:00:00

pack: fix memory leak in error path

1a42dd17

2013-05-31T14:13:11

Mutex init can fail It is obviously quite a serious problem if this happens, but mutex initialization can fail and we should detect it. It's a bit like a memory allocation failure, in that you're probably pretty screwed if this occurs, but at least we'll catch it.

f658dc43

2013-05-31T14:09:58

Zero memory for major objects before freeing By zeroing out the memory when we free larger objects (i.e. those that serve as collections of other data, such as repos, odb, refdb), I'm hoping that it will be easier for libgit2 bindings to find errors in their object management code.

0ddfcb40

2013-05-02T18:06:14

Switch to index_version as "git_pack_file is ready" flag We use p->index_map.data to check whether the struct has been set up and all the information about the index is stored there. This variable gets set up halfway through the setup process, however, and a thread can come along and use fields that haven't been written to yet. Crucially, pack_entry_find_offset() needs to read the index version (which is written after index_map) to know the offset and stride length to pass to sha1_entry_pos(). If these values are wrong, assertions in it will fail, as it will be reading bogus data. Make index_version the last field to be written and switch from using p->index_map.data to p->index_version as "git_pack_file is ready" flag as we can use it to know if every field has been written.

34bd5999

2013-05-02T17:14:05

Revert "Protect sha1_entry_pos call with mutex" This reverts commit 8c535f3f6879c6796d8107d7eb80dd8b2105621b.

8c535f3f

2013-05-02T03:34:56

Protect sha1_entry_pos call with mutex There is an occasional assertion failure in sha1_entry_pos from pack_entry_find_index when running threaded. Holding the mutex around the code that grabs the index_map data and processes it makes this assertion failure go away.

9d2f841a

2013-05-02T03:03:54

Add extra locking around packfile open We were still seeing a few issues in threaded access to packs. This adds extra locks around the opening of the mwindow to avoid a different race.

b7f167da

2013-04-29T13:52:12

Make git_oid_cmp public and add git_oid__cmp

38eef611

2013-04-16T14:19:27

Make indexer use shared packfile open code The indexer was creating a packfile object separately from the code in pack.c which was a problem since I put a call to git_mutex_init into just pack.c. This commit updates the pack function for creating a new pack object (i.e. git_packfile_check()) so that it can be used in both places and then makes indexer.c use the shared initialization routine. There are also a few minor formatting and warning message fixes.

5d2d21e5

2013-04-16T15:00:43

Consolidate packfile allocation further Rename git_packfile_check to git_packfile_alloc since it is now being used more in that capacity. Fix the various places that use it. Consolidate some repeated code in odb_pack.c related to the allocation of a new pack_backend.

53607868

2013-04-15T00:09:03

Further threading fixes This builds on the earlier thread safety work to make it so that setting the odb, index, refdb, or config for a repository is done in a threadsafe manner with minimized locking time. This is done by adding a lock to the repository object and using it to guard the assignment of the above listed pointers. The lock is only held to assign the pointer value. This also contains some minor fixes to the other work with pack files to reduce the time that locks are being held to and fix an apparently memory leak.

24c70804

2013-04-12T12:59:38

Add mutex around mapping and unmapping pack files When I was writing threading tests for the new cache, the main error I kept running into was a pack file having it's content unmapped underneath the running thread. This adds a lock around the routines that map and unmap the pack data so that threads can effectively reload the data when they need it. This also required reworking the error handling paths in a couple places in the code which I tried to make consistent.

0e040c03

2013-03-03T14:50:47

indexer: use a hashtable for keeping track of offsets These offsets are needed for REF_DELTA objects, which encode which object they use as a base, but not where it lies in the packfile, so we need a list. These objects are mostly from older packfiles, before OFS_DELTA was widely spread. The time spent in indexing these packfiles is greatly reduced, though remains above what git is able to do.

11d9f6b3

2013-01-27T14:17:07

Vector improvements and their fallout

aa3bf89d

2013-01-26T15:12:53

Fix a mutex leak in pack.c

9c62aaab

2013-01-14T17:42:12

pack: evict all of the pages at once Somewhat surprisingly, this can increase the speed considerably, as we don't bother trying to decide what to evict, and the most used entries are quickly back into the cache.

ed6648ba

2013-01-14T16:39:22

pack: evict objects from the cache in groups of eight This drops the cache eviction below libcrypto and zlib in the perf output. The number has been chosen empirically.

09e29e47

2013-01-12T19:31:07

pack: fixes to the cache The offset should be git_off_t, and we should check the return value of the mutex lock function.

96c9b9f0

2013-01-12T18:38:19

indexer: properly free the packfile resources The indexer needs to call the packfile's free function so it takes care of freeing the caches. We still need to close the mwf descriptor manually so we can rename the packfile into its final name on Windows.

80d647ad

2013-01-11T20:15:06

Revert "pack: packfile_free -> git_packfile_free and use it in the indexers" This reverts commit f289f886cb81bb570bed747053d5ebf8aba6bef7, which makes the tests fail on Windows. Revert until we can figure out a solution.

090d5e1f

2013-01-11T14:40:09

Fix MSVC compilation warnings

f289f886

2013-01-11T17:24:52

pack: packfile_free -> git_packfile_free and use it in the indexers It turns out the indexers have been ignoring the pack's free function and leaking data. Plug that.

c8f79c2b

2012-12-21T10:59:10

pack: abstract out the cache into its own functions

0ed75620

2012-12-21T13:46:48

pack: limit the amount of memory the base delta cache can use Currently limited to 16MB (like git) and to objects up to 1MB in size.

525d961c

2012-12-20T07:55:51

pack: refcount entries and add a mutex around cache access

c0f4a011

2012-12-19T16:48:12

pack: introduce a delta base cache Many delta bases are re-used. Cache them to avoid inflating the same data repeatedly. This version doesn't limit the amount of entries to store, so it can end up using a considerable amound of memory.

thodg/libgit2/src/pack.c

src/pack.c

Log