kmx git

Commit	Date	Message
a5c16f3c	2013-11-01T10:18:03	Add git_diff_options_init helper Sometimes the static initializer for git_diff_options cannot be used and since setting them to all zeroes doesn't actually work quite right, this adds a new helper for that situation. This also adds an explicit new value to the submodule settings options to be used when those enums need static initialization.
4bf630b6	2013-10-31T14:36:52	Make diff and status perform soft index reload This changes `git_index_read` to have two modes - a hard index reload that always resets the index to match the on-disk data (which was the old behavior) and a soft index reload that uses the timestamp / file size information and only replaces the index data if the file on disk has been modified. This then updates the git_status code to do a soft reload unless the new GIT_STATUS_OPT_NO_REFRESH flag is passed in. This also changes the behavior of the git_diff functions that use the index so that when an index is not explicitly passed in (i.e. when the functions call git_repository_index for you), they will also do a soft reload for you. This intentionally breaks the file signature of git_index_read because there has been some confusion about the behavior previously and it seems like all existing uses of the API should probably be examined to select the desired behavior.
7ce60099	2013-10-22T11:12:44	Fix typo
5de4ec81	2013-10-21T15:36:38	Implement patience and minimal diff flags It seems that to implement these options, we just have to pass the appropriate flags through to the libxdiff code taken from core git. So let's do it (and add a test).
3b5f7954	2013-10-21T13:42:42	Create git_diff_line and extend git_diff_hunk Instead of having functions with so very many parameters to pass hunk and line data, this takes the existing git_diff_hunk struct and extends it with more hunk data, plus adds a git_diff_line. Those structs are used to pass back hunk and line data instead of the old APIs that took tons of parameters. Some work that was previously only being done for git_diff_patch creation (scanning the diff content for exact line counts) is now done for all callbacks, but the performance difference should not be noticable.
74a627f0	2013-10-21T09:07:19	Tweak to git_diff_delta structure for nfiles While the base git_diff_delta structure always contains two files, when we introduce conflict data, it will be helpful to have an indicator when an additional file is involved.
10672e3e	2013-10-15T15:10:07	Diff API cleanup This lays groundwork for separating formatting options from diff creation options. This groups the formatting flags separately from the diff list creation flags and reorders the options. This also tweaks some APIs to further separate code that uses patches from code that just looks at git_diffs.
3ff1d123	2013-10-11T14:51:54	Rename diff objects and split patch.h This makes no functional change to diff but renames a couple of the objects and splits the new git_patch (formerly git_diff_patch) into a new header file.
17c7fbf6	2013-08-21T14:07:53	Split rewrites, status doesn't return rewrites Ensure that we apply splits to rewrites, even if we're not interested in examining it closely for rename/copy detection. In keeping with core git, status should not display rewrites, it should simply show files as "modified".
eb1c1707	2013-07-23T15:45:58	Restore GIT_DIFF_LINE_BINARY usage This restores the usage of GIT_DIFF_LINE_BINARY for the diff output line that reads "Binary files x and y differ" so that it can be optionally colorized independently of the file header.
197b8966	2013-07-23T14:34:31	Add hunk/file headers to git_diff_patch_size This allows git_diff_patch_size to account for hunk headers and file headers in the returned size. This required some refactoring of the code that is used to print file headers so that it could be invoked by the git_diff_patch_size API. Also this increases the test coverage and fixes an off-by-one bug in the size calculation when newline changes happen at the end of the file.
b4a4cf24	2013-07-22T16:07:56	Add git_diff_patch_size() API This adds a new API to get the size in bytes of the diffs in a git_diff_patch object.
f9775a37	2013-06-29T23:22:31	Add ignore_submodules to diff options This adds correct support for an equivalent to --ignore-submodules in diff, where an actual ignore value can be passed to diff to override the per submodule settings in the configuration. This required tweaking the constants for ignore values so that zero would not be used and could represent an unset option to the diff. This was an opportunity to move the submodule values into include/git2/types.h and to rename the poorly named DEFAULT values for ignore and update constants to RESET instead. Now the GIT_DIFF_IGNORE_SUBMODULES flag is exactly the same as setting the ignore_submodules option to GIT_SUBMODULE_IGNORE_ALL (which is actually a minor change from the old behavior in that submodules will now be treated as UNMODIFIED deltas instead of being left out totally - if you set GIT_DIFF_INCLUDE_UNMODIFIED). This includes tests for the various new settings.
2b672d5b	2013-07-08T22:46:36	Add git_pathspec_match_diff API This adds an additional pathspec API that will match a pathspec against a diff object. This is convenient if you want to handle renames (so you need the whole diff and can't use the pathspec constraint built into the diff API) but still want to tell if the diff had any files that matched the pathspec. When the pathspec is matched against a diff, instead of keeping a list of filenames that matched, instead the API keeps the list of git_diff_deltas that matched and they can be retrieved via a new API git_pathspec_match_list_diff_entry. There are a couple of other minor API extensions here that were mostly for the sake of convenience and to reduce dependencies on knowing the internal data structure between files inside the library.
e1967164	2013-06-24T15:33:41	Fixed most documentation header bugs Fixed a few header @param and @return typos with the help of -Wdocumentation in Xcode. The following warnings have not been fixed: common.h:213 - Not sure how the documentation format is for '...' notes.h:102 - Correct @param name but empty text notes.h:111 - Correct @param name but empty text pack.h:140 - @return missing text pack.h:148 - @return missing text
74ded024	2013-06-17T17:03:34	Add "as_path" parameters to blob and buffer diffs This adds parameters to the four functions that allow for blob-to- blob and blob-to-buffer differencing (either via callbacks or by making a git_diff_patch object). These parameters let you say that filename we should pretend the blob has while doing the diff. If you pass NULL, there should be no change from the existing behavior, which is to skip using attributes for file type checks and just look at content. With the parameters, you can plug into the new diff driver functionality and get binary or non-binary behavior, plus function context regular expressions, etc. This commit also fixes things so that the git_diff_delta that is generated by these functions will actually be populated with the data that we know about the blobs (or buffers) so you can use it appropriately. It also fixes a bug in generating patches from the git_diff_patch objects created via these functions. Lastly, there is one other behavior change that may matter. If there is no difference between the two blobs, these functions no longer generate any diff callbacks / patches unless you have passed in GIT_DIFF_INCLUDE_UNMODIFIED. This is pretty natural, but could potentially change the behavior of existing usage.
f9c824c5	2013-06-12T11:55:27	Add patch from blobs API This adds two new public APIs: git_diff_patch_from_blobs and git_diff_patch_from_blob_and_buffer, plus it refactors the code for git_diff_blobs and git_diff_blob_to_buffer so that they code is almost entirely shared between these APIs, and adds tests for the new APIs.
5dc98298	2013-06-11T11:22:22	Implement regex pattern diff driver This implements the loading of regular expression pattern lists for diff drivers that search for function context in that way. This also changes the way that diff drivers update options and interface with xdiff APIs to make them a little more flexible.
d20b0449	2013-05-24T10:37:40	Clarify GIT_DIFF_INCLUDE_UNTRACKED_CONTENT option This improves the docs for GIT_DIFF_INCLUDE_UNTRACKED_CONTENT as well as the other flags related to UNTRACKED items in diff, plus it makes that flag now automatically turn on GIT_DIFF_INCLUDE_UNTRACKED which seems like a reasonable dwim type of change.
67db583d	2013-05-23T15:06:07	More diff rename tests; better split swap handling This adds a couple more tests of different rename scenarios. Also, this fixes a problem with the case where you have two "split" deltas and the left half of one matches the right half of the other. That case was already being handled, but in the wrong order in a way that could result in bad output. Also, if the swap also happened to put the other two halves into the correct place (i.e. two files exchanged places with each other), then the second delta was left with the SPLIT flag set when it really should be cleared.
a21cbb12	2013-05-22T10:37:12	Significant rename detection rewrite This flips rename detection around so instead of creating a forward mapping from deltas to possible rename targets, instead it creates a reverse mapping, looking at possible targets and trying to find a source that they could have been renamed or copied from. This is important because each output can only have a single source, but a given source could map to multiple outputs (in the form of COPIED records). Additionally, this makes a couple of tweaks to the public rename detection APIs, mostly renaming a couple of options that control the behavior to make more sense and to be more like core Git. I walked through the tests looking at the exact results and updated the expectations based on what I saw. The new code is different from the old because it cannot give some nonsense results (like A was renamed to both B and C) which were part of the outputs previously.
9be5be47	2013-05-20T13:37:21	More git_diff_find_similar improvements - Add new GIT_DIFF_FIND_EXACT_MATCH_ONLY flag to do similarity matching without using the similarity metric (i.e. only compare the SHA). - Clean up the similarity measurement code to more rigorously distinguish between files that are not similar and files that are not comparable (previously, a 0 could either mean that the files could not be compared or that they were totally different) - When splitting a MODIFIED file into a DELETE/ADD pair, actually make a DELETED/UNTRACKED pair if the right side of the diff is from the working directory. This prevents an odd mix of ADDED and UNTRACKED files on workdir diffs.
d958e37a	2013-05-17T17:21:45	Fix issues with git_diff_find_similar There are a number of bugs in the rename code that only were obvious when I started testing it against large old repos with more complex patterns. (The code to do that testing is not ready to merge with libgit2, but I do plan to add more thorough tests.) This contains a significant number of changes and also tweaks the public API slightly to make emulating core git easier. Most notably, this separates the GIT_DIFF_FIND_AND_BREAK_REWRITES flag into FIND_REWRITES (which adds a self-similarity score to every modified file) and BREAK_REWRITES (which splits the modified deltas into add/remove pairs in the diff list). When you do a raw output of core git, rewrites show up as M090 or such, not at A and D output, so I wanted to be able to emulate that. Publicly, this also changes the flags to be uint16_t since we don't need values out of that range. Internally, this contains significant changes from a number of small bug fixes (like using the wrong side of the diff to decide if the object could be found in the ODB vs the workdir) to larger issues about which files can and should be compared and how the various edge cases of similarity scores should be treated. Honestly, I don't think this is the last update that will have to be made to this code, but I think this moves us closer to correct behavior and I tried to document the code so it would be easier to follow..
aadfa85b	2013-05-17T16:41:15	Add git_diff_print_raw printing helper Makes it easier to emulate the --raw option
d63eec69	2013-05-07T04:44:08	Improve diff function docs
e35e2684	2013-05-07T04:32:17	Add GIT_DIFF_LINE_CONTEXT_EOFNL This adds a new line origin constant for the special line that is used when both files end without a newline. In the course of writing the tests for this, I was having problems with modifying a file but not having diff notice because it was the same size and modified less than one second from the start of the test, so I decided to start working on nanosecond timestamp support. This commit doesn't contain the nanosecond support, but it contains the reorganization of maybe_modified and the hooks so that if the nanosecond data were being read by stat() (or rather being copied by git_index_entry__init_from_stat), then the nsec would be taken into account. This new stuff could probably use some more tests, although there is some amount of it here.
61c00541	2013-04-29T06:21:56	Update comment for clarity
e26b14c0	2013-04-26T15:35:47	Update diff handling of untracked directories When diff encounters an untracked directory, there was a shortcut that it took which is not compatible with core git. This makes the default behavior no longer take that shortcut and instead look inside the untracked directory to see if there are any untracked files within it. If there are not, then the directory is treated as an ignore directory instead of an untracked directory. This has implications for the git_status APIs.
0c289dd7	2013-03-25T16:40:16	Recursing into ignored dirs for diff and status This implements working versions of GIT_DIFF_RECURSE_IGNORED_DIRS and GIT_STATUS_OPT_RECURSE_IGNORED_DIRS along with some tests for the newly available behaviors. This is not turned on by default for status, but can be accessed via the options to the extended version of the command.
1aa5318a	2013-03-09T16:04:34	diff: allow asking for diffs with no context Previously, 0 meant default. This is problematic, as asking for 0 context lines is a valid thing to do. Change GIT_DIFF_OPTIONS_INIT to default to three and stop treating 0 as a magic value. In case no options are provided, make sure the options in the diff object default to 3.
d4b747c1	2013-02-21T16:44:44	Add diff rename tests with partial similarity This adds some new tests that actually exercise the similarity metric between files to detect renames, copies, and split modified files that are too heavily modified. There is still more testing to do - these tests are just partially covering the cases. There is also one bug fix in this where a change set with only MODIFY being broken into ADD/DELETE (due to low self-similarity) without any additional RENAMED entries would end up not processing the split requests (because the num_rewrites counter got reset).
960a04dd	2013-02-21T12:40:33	Initial integration of similarity metric to diff This is the initial integration of the similarity metric into the `git_diff_find_similar()` code path. The existing tests all pass, but the new functionality isn't currently well tested. The integration does go through the pluggable metric interface, so it should be possible to drop in an alternative to the internal metric that libgit2 implements. This comes along with a behavior change for an existing interface; namely, passing two NULLs to git_diff_blobs (or passing NULLs to git_diff_blob_to_buffer) will now call the file_cb parameter zero times instead of one time. I know it's strange that that change is paired with this other change, but it emerged from some initialization changes that I ended up making.
71a3d27e	2013-02-08T10:06:47	Replace diff delta binary with flags Previously the git_diff_delta recorded if the delta was binary. This replaces that (with no net change in structure size) with a full set of flags. The flag values that were already in use for individual git_diff_file objects are reused for the delta flags, too (along with renaming those flags to make it clear that they are used more generally). This (a) makes things somewhat more consistent (because I was using a -1 value in the "boolean" binary field to indicate unset, whereas now I can just use the flags that are easier to understand), and (b) will make it easier for me to add some additional flags to the delta object in the future, such as marking the results of a copy/rename detection or other deltas that might want a special indicator. While making this change, I officially moved some of the flags that were internal only into the private diff header. This also allowed me to remove a gross hack in rename/copy detect code where I was overwriting the status field with an internal value.
9bc8be3d	2013-02-19T10:25:41	Refine pluggable similarity API This plugs in the three basic similarity strategies for handling whitespace via internal use of the pluggable API. In so doing, I realized that the use of git_buf in the hashsig API was not needed and actually just made it harder to use, so I tweaked that API as well. Note that the similarity metric is still not hooked up in the find_similarity code - this is just setting out the function that will be used.
a235e9d3	2013-02-15T14:12:43	Pluggable similarity metric API
0d64ba48	2013-01-25T17:35:46	diff: add a notify callback to `git_diff__from_iterators` The callback will be called for each file, just before the `git_delta_t` gets inserted into the diff list. When the callback: - returns < 0, the diff process will be aborted - returns > 0, the delta will not be inserted into the diff list, but the diff process continues - returns 0, the delta is inserted into the diff list, and the diff process continues
f1e2735c	2013-01-30T11:10:39	Add helper for diff line stats This adds a `git_diff_patch_line_stats()` API that gets the total number of adds, deletes, and context lines in a patch. This will make it a little easier to emulate `git diff --stat` and the like. Right now, this relies on generating the `git_diff_patch` object, which is a pretty heavyweight way to get stat information. At some future point, it would probably be nice to be able to get this information without allocating the entire `git_diff_patch`, but that's a much larger project.
359fc2d2	2013-01-08T17:07:25	update copyrights
f2b7f7a6	2013-01-07T15:44:22	Share git_diff_blobs/git_diff_blob_to_buffer code This moves the implementation of these two APIs into common code that will be shared between the two. Also, this adds tests for the `git_diff_blob_to_buffer` API. Lastly, this adds some extra `const` to a few places that can use it.
f6234cd9	2012-12-21T20:57:43	Introduce git_diff_blob_to_buffer
7eb222fc	2013-01-06T10:39:35	Correct typos in documentation
ba084f7a	2012-12-17T11:03:42	More diff.h comment fixes Based on feedback from the ObjectiveGit folks, these are some further updates to diff.h areas that are poorly documented.
56c72b75	2012-12-17T11:00:53	Fix diff constructor name order confusion The diff constructor functions had some confusing names, where the "old" side of the diff was coming after the "new" side. This reverses the order in the function name to make it less confusing. Specifically... * git_diff_index_to_tree becomes git_diff_tree_to_index * git_diff_workdir_to_index becomes git_diff_index_to_workdir * git_diff_workdir_to_tree becomes git_diff_tree_to_workdir
fac43c54	2012-12-06T19:41:52	Allow compilation as C++
32770c52	2012-12-05T13:56:32	Fix diff header comments and missing const Based on the recent work to wrap diff in objective-git, this includes a fix for a missing const and a number of clarifications of the documentation.
7bcfbe16	2012-11-30T20:35:01	Make constant name all-caps
2f8d30be	2012-11-29T15:05:04	Deploy GIT_DIFF_OPTIONS_INIT
bde336ea	2012-11-29T12:26:09	Add version fields and init macros for public input structs.
793c4385	2012-11-20T16:36:06	Update diff callback param order This makes the diff functions that take callbacks both take the payload parameter after the callback function pointers and pass the payload as the last argument to the callback function instead of the first. This should make them consistent with other callbacks across the API.
cfbe4be3	2012-11-17T19:54:47	More external API cleanup Conflicts: src/branch.c tests-clar/refs/branches/create.c
4a0c7f56	2012-11-15T10:31:11	Merge pull request #1074 from edubart/ignore_diff_filemode Add option to ignore file mode in diffs
c0d5acf6	2012-11-15T14:43:21	Add option to ignore file mode in diffs
bbe6dbec	2012-11-14T23:29:48	Add explicit git_index ptr to diff and checkout A number of diff APIs and the `git_checkout_index` API take a `git_repository` object an operate on the index. This updates them to take a `git_index` pointer explicitly and only fall back on the `git_repository` index if the index input is NULL. This makes it easier to operate on a temporary index.
5735bf5e	2012-11-13T13:58:29	Fix diff API to better parameter order The diff API is not in the parameter order one would expect from other libgit2 APIs. This fixes that.
1362a983	2012-11-02T10:00:28	Merge pull request #1014 from arrbee/diff-rename-detection Initial implementation of diff rename detection
db106d01	2012-10-30T09:40:50	Move rename detection into new file This improves the naming for the rename related functionality moving it to be called `git_diff_find_similar()` and renaming all the associated constants, etc. to make more sense. I also moved the new code (plus the existing `git_diff_merge`) into a new file `diff_tform.c` where I can put new functions related to manipulating git diff lists. This also updates the implementation significantly from the last revision fixing some ordering issues (where break-rewrite needs to be handled prior to copy and rename detection) and improving config option handling.
cb7180a6	2012-10-25T11:48:39	Add git_diff_patch_print This adds a `git_diff_patch_print()` API which is more like the existing API to "print" a patch from an entire `git_diff_list` but operates on a single `git_diff_patch` object. Also, it rewrites the `git_diff_patch_to_str()` API to use that function (making it very small).
93cf7bb8	2012-10-24T20:56:32	Add git_diff_patch_to_str API This adds an API to generate a complete single-file patch text from a git_diff_patch object.
b4f5bb07	2012-10-23T16:40:51	Initial implementation of diff rename detection This implements the basis for diff rename and copy detection, although it is based on simple SHA comparison right now instead of using a matching algortihm. Just as `git_diff_merge` can be used as a post-pass on diffs to emulate certain command line behaviors, there is a new API `git_diff_detect` which will update a diff list in-place, adjusting some deltas to RENAMED or COPIED state (and also, eventually, splitting MODIFIED deltas where the change is too large into DELETED/ADDED pairs). This also adds a new test repo that will hold rename/copy/split scenarios. Right now, it just has exact-match rename and copy, but the tests are written to use tree diffs, so we should be able to add new test scenarios easily without breaking tests.
fe67e404	2012-10-09T14:35:24	Move enum comments next to actual values
0d64bef9	2012-10-05T15:56:57	Add complex checkout test and then fix checkout This started as a complex new test for checkout going through the "typechanges" test repository, but that revealed numerous issues with checkout, including: * complete failure with submodules * failure to create blobs with exec bits * problems when replacing a tree with a blob because the tree "example/" sorts after the blob "example" so the delete was being processed after the single file blob was created This fixes most of those problems and includes a number of other minor changes that made it easier to do that, including improving the TYPECHANGE support in diff/status, etc.
95f5f1e6	2012-10-02T13:57:15	Cleanup TYPECHANGE support This is just some cleanup code, rearranging some of the checkout code where TYPECHANGE support was added and adding some comments to the diff header regarding the constants.
bc16fd3e	2012-09-28T13:40:02	Introduce status/diff TYPECHANGE flags When I wrote the diff code, I based it on core git's diff output which tends to split a type change into an add and a delete. But core git's status has the notion of a T (typechange) flag for a file. This introduces that into our status APIs and modifies the diff code so it can be forced to not split type changes.
dfbff793	2012-10-08T15:14:12	Fix a few diff bugs with directory content There are a few cases where diff should leave directories in the diff list if we want to match core git, such as when the directory contains a .git dir. That feature was lost when I introduced some of the new submodule handling. This restores that and then fixes a couple of related to diff output that are triggered by having diffs with directories in them. Also, this adds a new flag that can be passed to diff if you want diff output to actually include the file content of any untracked files.
eada0762	2012-10-02T10:45:40	Merge pull request #939 from pwkelley/ignorecase Support for the core.ignorecase flag
bae957b9	2012-09-25T16:31:46	Add const to all shared pointers in diff API There are a lot of places where the diff API gives the user access to internal data structures and many of these were being exposed through non-const pointers. This replaces them all with const pointers for any object that the user can access but is still owned internally to the git_diff_list or git_diff_patch objects. This will probably break some bindings... Sorry!
64286308	2012-09-25T10:48:50	Fix bugs in new diff patch code This fixes all the bugs in the new diff patch code. The only really interesting one is that when we merge two diffs, we now have to actually exclude diff delta records that are not supposed to be tracked, as opposed to before where they could be included because they would be skipped silently by `git_diff_foreach()`. Other than that, there are just minor errors.
5f69a31f	2012-09-24T20:52:34	Initial implementation of new diff patch API Replacing the `git_iterator` object, this creates a simple API for accessing the "patch" for any file pair in a diff list and then gives indexed access to the hunks in the patch and the lines in the hunk. This is the initial implementation of this revised API - it is still broken, but at least builds cleanly.
9a12a625	2012-09-18T15:13:07	New take on iterating over diff content Allow diff deltas to be accessed by index and make patch generation explicit with hunk and line access by index as well.
ec40b7f9	2012-09-17T15:42:41	Support for core.ignorecase
1f35e89d	2012-09-11T12:03:33	Fix diff binary file detection In the process of adding tests for the max file size threshold (which treats files over a certain size as binary) there seem to be a number of problems in the new code with detecting binaries. This should fix those up, as well as add a test for the file size threshold stuff. Also, this un-deprecates `GIT_DIFF_LINE_ADD_EOFNL`, since I finally found a legitimate situation where it would be returned.
e597b189	2012-09-10T11:49:12	Move diff max_size to public API This commit adds a max_size value in the public `git_diff_options` structure so that the user can automatically flag blobs over a certain size as binary regardless of other properties. Also, and perhaps more importantly, this moves binary detection to be as early as possible in the diff traversal inner loop and makes sure that we stop loading objects as soon as we decide that they are binary.
b36effa2	2012-09-10T09:59:14	Replace git_diff_iterator_num_files with progress The `git_diff_iterator_num_files` API was problematic, since we don't actually know the exact number of files to be iterated over until we load those files into memory. This replaces it with a new `git_diff_iterator_progress` API that goes from 0 to 1, and moves and renamed the old API for the internal places that can tolerate a max value instead of an exact value.
8f9b6a13	2012-08-31T16:39:30	Better header comments
01ae1909	2012-09-06T10:13:38	diff: Cleanup documentation and printf compat
510f1bac	2012-08-30T16:39:05	Fix comments and a minor bug This adds better header comments and also fixes a bug in one of simple APIs that tells the number of lines in the current hunk.
f335ecd6	2012-08-30T14:24:16	Diff iterators This refactors the diff output code so that an iterator object can be used to traverse and generate the diffs, instead of just the `foreach()` style with callbacks. The code has been rearranged so that the two styles can still share most functions. This also replaces `GIT_REVWALKOVER` with `GIT_ITEROVER` and uses that as a common error code for marking the end of iteration when using a iterator style of object.
5f4a61ae	2012-08-09T19:43:25	Working implementation of git_submodule_status This is a big redesign of the git_submodule_status API and the implementation of the redesigned API. It also fixes a number of bugs that I found in other parts of the submodule API while writing the tests for the status part. This also fixes a couple of bugs in the iterators that had not been noticed before - one with iterating when there is a gitlink (i.e. separate-work-dir) and one where I was treating anything even vaguely submodule-like as a submodule, more aggressively than core git does.
5dca2010	2012-08-03T17:08:01	Update iterators for consistency across library This updates all the `foreach()` type functions across the library that take callbacks from the user to have a consistent behavior. The rules are: * A callback terminates the loop by returning any non-zero value * Once the callback returns non-zero, it will not be called again (i.e. the loop stops all iteration regardless of state) * If the callback returns non-zero, the parent fn returns GIT_EUSER * Although the parent returns GIT_EUSER, no error will be set in the library and `giterr_last()` will return NULL if called. This commit makes those changes across the library and adds tests for most of the iteration APIs to make sure that they follow the above rules.
a1773f9d	2012-07-23T18:16:09	Add flag to turn off pathspec testing for diff and status
29f9186d	2012-07-02T11:18:01	diff: make inter-hunk-context default value git-compliant Default in git core is 0, not 3
145e696b	2012-06-08T11:56:24	Minor fixes, cleanups, and clarifications There are three actual changes in this commit: 1. When the trailing newline of a file is removed in a diff, the change will now be reported with `GIT_DIFF_LINE_DEL_EOFNL` passed to the callback. Previously, the `ADD_EOFNL` constant was given which was just an error in my understanding of when the various circumstances arose. `GIT_DIFF_LINE_ADD_EOFNL` is deprecated and should never be generated. A new newline is simply an `ADD`. 2. Rewrote the `diff_delta__merge_like_cgit` function that contains the core logic of the `git_diff_merge` implementation. The new version doesn't actually have significantly different behavior, but the logic should be much more obvious, I think. 3. Fixed a bug in `git_diff_merge` where it freed a string pool while some of the string data was still in use. This led to `git_diff_print_patch` accessing memory that had been freed. The rest of this commit contains improved documentation in `diff.h` to make the behavior and the equivalencies with core git clearer, and a bunch of new tests to cover the various cases, oh and a minor simplification of `examples/diff.c`.
3f035860	2012-06-07T22:43:03	misc: Fix warnings from PVS Studio trial
d73c94b2	2012-05-19T20:24:55	Fix spelling errors.
d1c4312a	2012-05-03T22:21:08	diff: improve git_diff_blobs() documentation
28ef7f9b	2012-05-03T17:25:01	diff: make git_diff_blobs() able to detect binary blobs
40879fac	2012-05-02T15:59:02	Merge branch 'new-error-handling' into development Conflicts: .travis.yml include/git2/diff.h src/config_file.c src/diff.c src/diff_output.c src/mwindow.c src/path.c tests-clar/clar_helpers.c tests-clar/object/tree/frompath.c tests/t00-core.c tests/t03-objwrite.c tests/t08-tag.c tests/t10-refs.c tests/t12-repo.c tests/t18-status.c tests/test_helpers.c tests/test_main.c
16b83019	2012-03-04T23:28:36	Fix usage of "new" for fieldname in public header This should restore the ability to include libgit2 headers in C++ projects. Cherry picked 2de60205dfea2c4a422b2108a5e8605f97c2e895 from development into new-error-handling.
1d2dd864	2012-04-29T19:42:51	diff: provide more context to the consumer of the callbacks Update the callback to provide some information related to the file change being processed and the range of the hunk, when applicable.
4b136a94	2012-03-23T09:26:09	Fix crash in new status and add recurse option This fixes the bug that @nulltoken found (thank you!) where if there were untracked directories alphabetically after the last tracked item, the diff implementation would deref a NULL pointer. The fix involved the code which decides if it is necessary to recurse into a directory in the working dir, so it was easy to add a new option `GIT_STATUS_OPT_RECURSE_UNTRACKED_DIRS` to control if the contents of untracked directories should be included in status.
66142ae0	2012-03-22T10:44:36	New status fixes This adds support for roughly-right tracking of submodules (although it does not recurse into submodules to detect internal modifications a la core git), and it adds support for including unmodified files in diff iteration if requested.
7826d577	2012-03-21T10:00:54	diff_output: remove unused parameter Signed-off-by: schu <schu-github@schulog.org>
2de60205	2012-03-04T23:28:36	Fix usage of "new" for fieldname in public header This should restore the ability to include libgit2 headers in C++ projects.
e1bcc191	2012-03-01T11:45:00	Revert GIT_STATUS constants to avoid issues This reverts the changes to the GIT_STATUS constants and adds a new enumeration to describe the type of change in a git_diff_delta. I don't love this solution, but it should prevent strange errors from occurring for now. Eventually, I would like to unify the various status constants, but it needs a larger plan and I just wanted to eliminate this breakage quickly.
74fa4bfa	2012-02-28T16:14:47	Update diff to use iterators This is a major reorganization of the diff code. This changes the diff functions to use the iterators for traversing the content. This allowed a lot of code to be simplified. Also, this moved the functions relating to outputting a diff into a new file (diff_output.c). This includes a number of other changes - adding utility functions, extending iterators, etc. plus more tests for the diff code. This also takes the example diff.c program much further in terms of emulating git-diff command line options.
a2e895be	2012-02-07T12:14:28	Continue implementation of git-diff * Implemented git_diff_index_to_tree * Reworked git_diff_options structure to handle more options * Made most of the options in git_diff_options actually work * Reorganized code a bit to remove some redundancy * Added option parsing to examples/diff.c to test most options
3a437590	2012-02-03T16:53:01	Clean up diff implementation for review This fixes several bugs, updates tests and docs, eliminates the FILE* assumption in favor of printing callbacks for the diff patch formatter helpers, and adds a "diff" example function that can perform a diff from the command line.
cd33323b	2012-01-27T11:29:25	Initial implementation of git_diff_blob This gets the basic plumbing in place for git_diff_blob. There is a known issue where additional parameters like the number of lines of context to display on the diff are not working correctly (which leads one of the new unit tests to fail).
65b09b1d	2012-02-02T18:03:43	Implement diff lists and formatters This reworks the diff API to separate the steps of producing a diff descriptions from formatting the diff. This will allow us to share diff output code with the various diff creation scenarios and will allow us to implement rename detection as an optional pass that can be run on a diff list.

a5c16f3c

2013-11-01T10:18:03

Add git_diff_options_init helper Sometimes the static initializer for git_diff_options cannot be used and since setting them to all zeroes doesn't actually work quite right, this adds a new helper for that situation. This also adds an explicit new value to the submodule settings options to be used when those enums need static initialization.

4bf630b6

2013-10-31T14:36:52

Make diff and status perform soft index reload This changes `git_index_read` to have two modes - a hard index reload that always resets the index to match the on-disk data (which was the old behavior) and a soft index reload that uses the timestamp / file size information and only replaces the index data if the file on disk has been modified. This then updates the git_status code to do a soft reload unless the new GIT_STATUS_OPT_NO_REFRESH flag is passed in. This also changes the behavior of the git_diff functions that use the index so that when an index is not explicitly passed in (i.e. when the functions call git_repository_index for you), they will also do a soft reload for you. This intentionally breaks the file signature of git_index_read because there has been some confusion about the behavior previously and it seems like all existing uses of the API should probably be examined to select the desired behavior.

7ce60099

2013-10-22T11:12:44

Fix typo

5de4ec81

2013-10-21T15:36:38

Implement patience and minimal diff flags It seems that to implement these options, we just have to pass the appropriate flags through to the libxdiff code taken from core git. So let's do it (and add a test).

3b5f7954

2013-10-21T13:42:42

Create git_diff_line and extend git_diff_hunk Instead of having functions with so very many parameters to pass hunk and line data, this takes the existing git_diff_hunk struct and extends it with more hunk data, plus adds a git_diff_line. Those structs are used to pass back hunk and line data instead of the old APIs that took tons of parameters. Some work that was previously only being done for git_diff_patch creation (scanning the diff content for exact line counts) is now done for all callbacks, but the performance difference should not be noticable.

74a627f0

2013-10-21T09:07:19

Tweak to git_diff_delta structure for nfiles While the base git_diff_delta structure always contains two files, when we introduce conflict data, it will be helpful to have an indicator when an additional file is involved.

10672e3e

2013-10-15T15:10:07

Diff API cleanup This lays groundwork for separating formatting options from diff creation options. This groups the formatting flags separately from the diff list creation flags and reorders the options. This also tweaks some APIs to further separate code that uses patches from code that just looks at git_diffs.

3ff1d123

2013-10-11T14:51:54

Rename diff objects and split patch.h This makes no functional change to diff but renames a couple of the objects and splits the new git_patch (formerly git_diff_patch) into a new header file.

17c7fbf6

2013-08-21T14:07:53

Split rewrites, status doesn't return rewrites Ensure that we apply splits to rewrites, even if we're not interested in examining it closely for rename/copy detection. In keeping with core git, status should not display rewrites, it should simply show files as "modified".

eb1c1707

2013-07-23T15:45:58

Restore GIT_DIFF_LINE_BINARY usage This restores the usage of GIT_DIFF_LINE_BINARY for the diff output line that reads "Binary files x and y differ" so that it can be optionally colorized independently of the file header.

197b8966

2013-07-23T14:34:31

Add hunk/file headers to git_diff_patch_size This allows git_diff_patch_size to account for hunk headers and file headers in the returned size. This required some refactoring of the code that is used to print file headers so that it could be invoked by the git_diff_patch_size API. Also this increases the test coverage and fixes an off-by-one bug in the size calculation when newline changes happen at the end of the file.

b4a4cf24

2013-07-22T16:07:56

Add git_diff_patch_size() API This adds a new API to get the size in bytes of the diffs in a git_diff_patch object.

f9775a37

2013-06-29T23:22:31

Add ignore_submodules to diff options This adds correct support for an equivalent to --ignore-submodules in diff, where an actual ignore value can be passed to diff to override the per submodule settings in the configuration. This required tweaking the constants for ignore values so that zero would not be used and could represent an unset option to the diff. This was an opportunity to move the submodule values into include/git2/types.h and to rename the poorly named DEFAULT values for ignore and update constants to RESET instead. Now the GIT_DIFF_IGNORE_SUBMODULES flag is exactly the same as setting the ignore_submodules option to GIT_SUBMODULE_IGNORE_ALL (which is actually a minor change from the old behavior in that submodules will now be treated as UNMODIFIED deltas instead of being left out totally - if you set GIT_DIFF_INCLUDE_UNMODIFIED). This includes tests for the various new settings.

2b672d5b

2013-07-08T22:46:36

Add git_pathspec_match_diff API This adds an additional pathspec API that will match a pathspec against a diff object. This is convenient if you want to handle renames (so you need the whole diff and can't use the pathspec constraint built into the diff API) but still want to tell if the diff had any files that matched the pathspec. When the pathspec is matched against a diff, instead of keeping a list of filenames that matched, instead the API keeps the list of git_diff_deltas that matched and they can be retrieved via a new API git_pathspec_match_list_diff_entry. There are a couple of other minor API extensions here that were mostly for the sake of convenience and to reduce dependencies on knowing the internal data structure between files inside the library.

e1967164

2013-06-24T15:33:41

Fixed most documentation header bugs Fixed a few header @param and @return typos with the help of -Wdocumentation in Xcode. The following warnings have not been fixed: common.h:213 - Not sure how the documentation format is for '...' notes.h:102 - Correct @param name but empty text notes.h:111 - Correct @param name but empty text pack.h:140 - @return missing text pack.h:148 - @return missing text

74ded024

2013-06-17T17:03:34

Add "as_path" parameters to blob and buffer diffs This adds parameters to the four functions that allow for blob-to- blob and blob-to-buffer differencing (either via callbacks or by making a git_diff_patch object). These parameters let you say that filename we should pretend the blob has while doing the diff. If you pass NULL, there should be no change from the existing behavior, which is to skip using attributes for file type checks and just look at content. With the parameters, you can plug into the new diff driver functionality and get binary or non-binary behavior, plus function context regular expressions, etc. This commit also fixes things so that the git_diff_delta that is generated by these functions will actually be populated with the data that we know about the blobs (or buffers) so you can use it appropriately. It also fixes a bug in generating patches from the git_diff_patch objects created via these functions. Lastly, there is one other behavior change that may matter. If there is no difference between the two blobs, these functions no longer generate any diff callbacks / patches unless you have passed in GIT_DIFF_INCLUDE_UNMODIFIED. This is pretty natural, but could potentially change the behavior of existing usage.

f9c824c5

2013-06-12T11:55:27

Add patch from blobs API This adds two new public APIs: git_diff_patch_from_blobs and git_diff_patch_from_blob_and_buffer, plus it refactors the code for git_diff_blobs and git_diff_blob_to_buffer so that they code is almost entirely shared between these APIs, and adds tests for the new APIs.

5dc98298

2013-06-11T11:22:22

Implement regex pattern diff driver This implements the loading of regular expression pattern lists for diff drivers that search for function context in that way. This also changes the way that diff drivers update options and interface with xdiff APIs to make them a little more flexible.

d20b0449

2013-05-24T10:37:40

Clarify GIT_DIFF_INCLUDE_UNTRACKED_CONTENT option This improves the docs for GIT_DIFF_INCLUDE_UNTRACKED_CONTENT as well as the other flags related to UNTRACKED items in diff, plus it makes that flag now automatically turn on GIT_DIFF_INCLUDE_UNTRACKED which seems like a reasonable dwim type of change.

67db583d

2013-05-23T15:06:07

More diff rename tests; better split swap handling This adds a couple more tests of different rename scenarios. Also, this fixes a problem with the case where you have two "split" deltas and the left half of one matches the right half of the other. That case was already being handled, but in the wrong order in a way that could result in bad output. Also, if the swap also happened to put the other two halves into the correct place (i.e. two files exchanged places with each other), then the second delta was left with the SPLIT flag set when it really should be cleared.

a21cbb12

2013-05-22T10:37:12

Significant rename detection rewrite This flips rename detection around so instead of creating a forward mapping from deltas to possible rename targets, instead it creates a reverse mapping, looking at possible targets and trying to find a source that they could have been renamed or copied from. This is important because each output can only have a single source, but a given source could map to multiple outputs (in the form of COPIED records). Additionally, this makes a couple of tweaks to the public rename detection APIs, mostly renaming a couple of options that control the behavior to make more sense and to be more like core Git. I walked through the tests looking at the exact results and updated the expectations based on what I saw. The new code is different from the old because it cannot give some nonsense results (like A was renamed to both B and C) which were part of the outputs previously.

9be5be47

2013-05-20T13:37:21

More git_diff_find_similar improvements - Add new GIT_DIFF_FIND_EXACT_MATCH_ONLY flag to do similarity matching without using the similarity metric (i.e. only compare the SHA). - Clean up the similarity measurement code to more rigorously distinguish between files that are not similar and files that are not comparable (previously, a 0 could either mean that the files could not be compared or that they were totally different) - When splitting a MODIFIED file into a DELETE/ADD pair, actually make a DELETED/UNTRACKED pair if the right side of the diff is from the working directory. This prevents an odd mix of ADDED and UNTRACKED files on workdir diffs.

d958e37a

2013-05-17T17:21:45

Fix issues with git_diff_find_similar There are a number of bugs in the rename code that only were obvious when I started testing it against large old repos with more complex patterns. (The code to do that testing is not ready to merge with libgit2, but I do plan to add more thorough tests.) This contains a significant number of changes and also tweaks the public API slightly to make emulating core git easier. Most notably, this separates the GIT_DIFF_FIND_AND_BREAK_REWRITES flag into FIND_REWRITES (which adds a self-similarity score to every modified file) and BREAK_REWRITES (which splits the modified deltas into add/remove pairs in the diff list). When you do a raw output of core git, rewrites show up as M090 or such, not at A and D output, so I wanted to be able to emulate that. Publicly, this also changes the flags to be uint16_t since we don't need values out of that range. Internally, this contains significant changes from a number of small bug fixes (like using the wrong side of the diff to decide if the object could be found in the ODB vs the workdir) to larger issues about which files can and should be compared and how the various edge cases of similarity scores should be treated. Honestly, I don't think this is the last update that will have to be made to this code, but I think this moves us closer to correct behavior and I tried to document the code so it would be easier to follow..

aadfa85b

2013-05-17T16:41:15

Add git_diff_print_raw printing helper Makes it easier to emulate the --raw option

d63eec69

2013-05-07T04:44:08

Improve diff function docs

e35e2684

2013-05-07T04:32:17

Add GIT_DIFF_LINE_CONTEXT_EOFNL This adds a new line origin constant for the special line that is used when both files end without a newline. In the course of writing the tests for this, I was having problems with modifying a file but not having diff notice because it was the same size and modified less than one second from the start of the test, so I decided to start working on nanosecond timestamp support. This commit doesn't contain the nanosecond support, but it contains the reorganization of maybe_modified and the hooks so that if the nanosecond data were being read by stat() (or rather being copied by git_index_entry__init_from_stat), then the nsec would be taken into account. This new stuff could probably use some more tests, although there is some amount of it here.

61c00541

2013-04-29T06:21:56

Update comment for clarity

e26b14c0

2013-04-26T15:35:47

Update diff handling of untracked directories When diff encounters an untracked directory, there was a shortcut that it took which is not compatible with core git. This makes the default behavior no longer take that shortcut and instead look inside the untracked directory to see if there are any untracked files within it. If there are not, then the directory is treated as an ignore directory instead of an untracked directory. This has implications for the git_status APIs.

0c289dd7

2013-03-25T16:40:16

Recursing into ignored dirs for diff and status This implements working versions of GIT_DIFF_RECURSE_IGNORED_DIRS and GIT_STATUS_OPT_RECURSE_IGNORED_DIRS along with some tests for the newly available behaviors. This is not turned on by default for status, but can be accessed via the options to the extended version of the command.

1aa5318a

2013-03-09T16:04:34

diff: allow asking for diffs with no context Previously, 0 meant default. This is problematic, as asking for 0 context lines is a valid thing to do. Change GIT_DIFF_OPTIONS_INIT to default to three and stop treating 0 as a magic value. In case no options are provided, make sure the options in the diff object default to 3.

d4b747c1

2013-02-21T16:44:44

Add diff rename tests with partial similarity This adds some new tests that actually exercise the similarity metric between files to detect renames, copies, and split modified files that are too heavily modified. There is still more testing to do - these tests are just partially covering the cases. There is also one bug fix in this where a change set with only MODIFY being broken into ADD/DELETE (due to low self-similarity) without any additional RENAMED entries would end up not processing the split requests (because the num_rewrites counter got reset).

960a04dd

2013-02-21T12:40:33

Initial integration of similarity metric to diff This is the initial integration of the similarity metric into the `git_diff_find_similar()` code path. The existing tests all pass, but the new functionality isn't currently well tested. The integration does go through the pluggable metric interface, so it should be possible to drop in an alternative to the internal metric that libgit2 implements. This comes along with a behavior change for an existing interface; namely, passing two NULLs to git_diff_blobs (or passing NULLs to git_diff_blob_to_buffer) will now call the file_cb parameter zero times instead of one time. I know it's strange that that change is paired with this other change, but it emerged from some initialization changes that I ended up making.

71a3d27e

2013-02-08T10:06:47

Replace diff delta binary with flags Previously the git_diff_delta recorded if the delta was binary. This replaces that (with no net change in structure size) with a full set of flags. The flag values that were already in use for individual git_diff_file objects are reused for the delta flags, too (along with renaming those flags to make it clear that they are used more generally). This (a) makes things somewhat more consistent (because I was using a -1 value in the "boolean" binary field to indicate unset, whereas now I can just use the flags that are easier to understand), and (b) will make it easier for me to add some additional flags to the delta object in the future, such as marking the results of a copy/rename detection or other deltas that might want a special indicator. While making this change, I officially moved some of the flags that were internal only into the private diff header. This also allowed me to remove a gross hack in rename/copy detect code where I was overwriting the status field with an internal value.

9bc8be3d

2013-02-19T10:25:41

Refine pluggable similarity API This plugs in the three basic similarity strategies for handling whitespace via internal use of the pluggable API. In so doing, I realized that the use of git_buf in the hashsig API was not needed and actually just made it harder to use, so I tweaked that API as well. Note that the similarity metric is still not hooked up in the find_similarity code - this is just setting out the function that will be used.

a235e9d3

2013-02-15T14:12:43

Pluggable similarity metric API

0d64ba48

2013-01-25T17:35:46

diff: add a notify callback to `git_diff__from_iterators` The callback will be called for each file, just before the `git_delta_t` gets inserted into the diff list. When the callback: - returns < 0, the diff process will be aborted - returns > 0, the delta will not be inserted into the diff list, but the diff process continues - returns 0, the delta is inserted into the diff list, and the diff process continues

f1e2735c

2013-01-30T11:10:39

Add helper for diff line stats This adds a `git_diff_patch_line_stats()` API that gets the total number of adds, deletes, and context lines in a patch. This will make it a little easier to emulate `git diff --stat` and the like. Right now, this relies on generating the `git_diff_patch` object, which is a pretty heavyweight way to get stat information. At some future point, it would probably be nice to be able to get this information without allocating the entire `git_diff_patch`, but that's a much larger project.

359fc2d2

2013-01-08T17:07:25

update copyrights

f2b7f7a6

2013-01-07T15:44:22

Share git_diff_blobs/git_diff_blob_to_buffer code This moves the implementation of these two APIs into common code that will be shared between the two. Also, this adds tests for the `git_diff_blob_to_buffer` API. Lastly, this adds some extra `const` to a few places that can use it.

f6234cd9

2012-12-21T20:57:43

Introduce git_diff_blob_to_buffer

7eb222fc

2013-01-06T10:39:35

Correct typos in documentation

ba084f7a

2012-12-17T11:03:42

More diff.h comment fixes Based on feedback from the ObjectiveGit folks, these are some further updates to diff.h areas that are poorly documented.

56c72b75

2012-12-17T11:00:53

Fix diff constructor name order confusion The diff constructor functions had some confusing names, where the "old" side of the diff was coming after the "new" side. This reverses the order in the function name to make it less confusing. Specifically... * git_diff_index_to_tree becomes git_diff_tree_to_index * git_diff_workdir_to_index becomes git_diff_index_to_workdir * git_diff_workdir_to_tree becomes git_diff_tree_to_workdir

fac43c54

2012-12-06T19:41:52

Allow compilation as C++

32770c52

2012-12-05T13:56:32

Fix diff header comments and missing const Based on the recent work to wrap diff in objective-git, this includes a fix for a missing const and a number of clarifications of the documentation.

7bcfbe16

2012-11-30T20:35:01

Make constant name all-caps

2f8d30be

2012-11-29T15:05:04

Deploy GIT_DIFF_OPTIONS_INIT

bde336ea

2012-11-29T12:26:09

Add version fields and init macros for public input structs.

793c4385

2012-11-20T16:36:06

Update diff callback param order This makes the diff functions that take callbacks both take the payload parameter after the callback function pointers and pass the payload as the last argument to the callback function instead of the first. This should make them consistent with other callbacks across the API.

cfbe4be3

2012-11-17T19:54:47

More external API cleanup Conflicts: src/branch.c tests-clar/refs/branches/create.c

4a0c7f56

2012-11-15T10:31:11

Merge pull request #1074 from edubart/ignore_diff_filemode Add option to ignore file mode in diffs

c0d5acf6

2012-11-15T14:43:21

Add option to ignore file mode in diffs

bbe6dbec

2012-11-14T23:29:48

Add explicit git_index ptr to diff and checkout A number of diff APIs and the `git_checkout_index` API take a `git_repository` object an operate on the index. This updates them to take a `git_index` pointer explicitly and only fall back on the `git_repository` index if the index input is NULL. This makes it easier to operate on a temporary index.

5735bf5e

2012-11-13T13:58:29

Fix diff API to better parameter order The diff API is not in the parameter order one would expect from other libgit2 APIs. This fixes that.

1362a983

2012-11-02T10:00:28

Merge pull request #1014 from arrbee/diff-rename-detection Initial implementation of diff rename detection

db106d01

2012-10-30T09:40:50

Move rename detection into new file This improves the naming for the rename related functionality moving it to be called `git_diff_find_similar()` and renaming all the associated constants, etc. to make more sense. I also moved the new code (plus the existing `git_diff_merge`) into a new file `diff_tform.c` where I can put new functions related to manipulating git diff lists. This also updates the implementation significantly from the last revision fixing some ordering issues (where break-rewrite needs to be handled prior to copy and rename detection) and improving config option handling.

cb7180a6

2012-10-25T11:48:39

Add git_diff_patch_print This adds a `git_diff_patch_print()` API which is more like the existing API to "print" a patch from an entire `git_diff_list` but operates on a single `git_diff_patch` object. Also, it rewrites the `git_diff_patch_to_str()` API to use that function (making it very small).

93cf7bb8

2012-10-24T20:56:32

Add git_diff_patch_to_str API This adds an API to generate a complete single-file patch text from a git_diff_patch object.

b4f5bb07

2012-10-23T16:40:51

Initial implementation of diff rename detection This implements the basis for diff rename and copy detection, although it is based on simple SHA comparison right now instead of using a matching algortihm. Just as `git_diff_merge` can be used as a post-pass on diffs to emulate certain command line behaviors, there is a new API `git_diff_detect` which will update a diff list in-place, adjusting some deltas to RENAMED or COPIED state (and also, eventually, splitting MODIFIED deltas where the change is too large into DELETED/ADDED pairs). This also adds a new test repo that will hold rename/copy/split scenarios. Right now, it just has exact-match rename and copy, but the tests are written to use tree diffs, so we should be able to add new test scenarios easily without breaking tests.

fe67e404

2012-10-09T14:35:24

Move enum comments next to actual values

0d64bef9

2012-10-05T15:56:57

Add complex checkout test and then fix checkout This started as a complex new test for checkout going through the "typechanges" test repository, but that revealed numerous issues with checkout, including: * complete failure with submodules * failure to create blobs with exec bits * problems when replacing a tree with a blob because the tree "example/" sorts after the blob "example" so the delete was being processed after the single file blob was created This fixes most of those problems and includes a number of other minor changes that made it easier to do that, including improving the TYPECHANGE support in diff/status, etc.

95f5f1e6

2012-10-02T13:57:15

Cleanup TYPECHANGE support This is just some cleanup code, rearranging some of the checkout code where TYPECHANGE support was added and adding some comments to the diff header regarding the constants.

bc16fd3e

2012-09-28T13:40:02

Introduce status/diff TYPECHANGE flags When I wrote the diff code, I based it on core git's diff output which tends to split a type change into an add and a delete. But core git's status has the notion of a T (typechange) flag for a file. This introduces that into our status APIs and modifies the diff code so it can be forced to not split type changes.

dfbff793

2012-10-08T15:14:12

Fix a few diff bugs with directory content There are a few cases where diff should leave directories in the diff list if we want to match core git, such as when the directory contains a .git dir. That feature was lost when I introduced some of the new submodule handling. This restores that and then fixes a couple of related to diff output that are triggered by having diffs with directories in them. Also, this adds a new flag that can be passed to diff if you want diff output to actually include the file content of any untracked files.

eada0762

2012-10-02T10:45:40

Merge pull request #939 from pwkelley/ignorecase Support for the core.ignorecase flag

bae957b9

2012-09-25T16:31:46

Add const to all shared pointers in diff API There are a lot of places where the diff API gives the user access to internal data structures and many of these were being exposed through non-const pointers. This replaces them all with const pointers for any object that the user can access but is still owned internally to the git_diff_list or git_diff_patch objects. This will probably break some bindings... Sorry!

64286308

2012-09-25T10:48:50

Fix bugs in new diff patch code This fixes all the bugs in the new diff patch code. The only really interesting one is that when we merge two diffs, we now have to actually exclude diff delta records that are not supposed to be tracked, as opposed to before where they could be included because they would be skipped silently by `git_diff_foreach()`. Other than that, there are just minor errors.

5f69a31f

2012-09-24T20:52:34

Initial implementation of new diff patch API Replacing the `git_iterator` object, this creates a simple API for accessing the "patch" for any file pair in a diff list and then gives indexed access to the hunks in the patch and the lines in the hunk. This is the initial implementation of this revised API - it is still broken, but at least builds cleanly.

9a12a625

2012-09-18T15:13:07

New take on iterating over diff content Allow diff deltas to be accessed by index and make patch generation explicit with hunk and line access by index as well.

ec40b7f9

2012-09-17T15:42:41

Support for core.ignorecase

1f35e89d

2012-09-11T12:03:33

Fix diff binary file detection In the process of adding tests for the max file size threshold (which treats files over a certain size as binary) there seem to be a number of problems in the new code with detecting binaries. This should fix those up, as well as add a test for the file size threshold stuff. Also, this un-deprecates `GIT_DIFF_LINE_ADD_EOFNL`, since I finally found a legitimate situation where it would be returned.

e597b189

2012-09-10T11:49:12

Move diff max_size to public API This commit adds a max_size value in the public `git_diff_options` structure so that the user can automatically flag blobs over a certain size as binary regardless of other properties. Also, and perhaps more importantly, this moves binary detection to be as early as possible in the diff traversal inner loop and makes sure that we stop loading objects as soon as we decide that they are binary.

b36effa2

2012-09-10T09:59:14

Replace git_diff_iterator_num_files with progress The `git_diff_iterator_num_files` API was problematic, since we don't actually know the exact number of files to be iterated over until we load those files into memory. This replaces it with a new `git_diff_iterator_progress` API that goes from 0 to 1, and moves and renamed the old API for the internal places that can tolerate a max value instead of an exact value.

8f9b6a13

2012-08-31T16:39:30

Better header comments

01ae1909

2012-09-06T10:13:38

diff: Cleanup documentation and printf compat

510f1bac

2012-08-30T16:39:05

Fix comments and a minor bug This adds better header comments and also fixes a bug in one of simple APIs that tells the number of lines in the current hunk.

f335ecd6

2012-08-30T14:24:16

Diff iterators This refactors the diff output code so that an iterator object can be used to traverse and generate the diffs, instead of just the `foreach()` style with callbacks. The code has been rearranged so that the two styles can still share most functions. This also replaces `GIT_REVWALKOVER` with `GIT_ITEROVER` and uses that as a common error code for marking the end of iteration when using a iterator style of object.

5f4a61ae

2012-08-09T19:43:25

Working implementation of git_submodule_status This is a big redesign of the git_submodule_status API and the implementation of the redesigned API. It also fixes a number of bugs that I found in other parts of the submodule API while writing the tests for the status part. This also fixes a couple of bugs in the iterators that had not been noticed before - one with iterating when there is a gitlink (i.e. separate-work-dir) and one where I was treating anything even vaguely submodule-like as a submodule, more aggressively than core git does.

5dca2010

2012-08-03T17:08:01

Update iterators for consistency across library This updates all the `foreach()` type functions across the library that take callbacks from the user to have a consistent behavior. The rules are: * A callback terminates the loop by returning any non-zero value * Once the callback returns non-zero, it will not be called again (i.e. the loop stops all iteration regardless of state) * If the callback returns non-zero, the parent fn returns GIT_EUSER * Although the parent returns GIT_EUSER, no error will be set in the library and `giterr_last()` will return NULL if called. This commit makes those changes across the library and adds tests for most of the iteration APIs to make sure that they follow the above rules.

a1773f9d

2012-07-23T18:16:09

Add flag to turn off pathspec testing for diff and status

29f9186d

2012-07-02T11:18:01

diff: make inter-hunk-context default value git-compliant Default in git core is 0, not 3

145e696b

2012-06-08T11:56:24

Minor fixes, cleanups, and clarifications There are three actual changes in this commit: 1. When the trailing newline of a file is removed in a diff, the change will now be reported with `GIT_DIFF_LINE_DEL_EOFNL` passed to the callback. Previously, the `ADD_EOFNL` constant was given which was just an error in my understanding of when the various circumstances arose. `GIT_DIFF_LINE_ADD_EOFNL` is deprecated and should never be generated. A new newline is simply an `ADD`. 2. Rewrote the `diff_delta__merge_like_cgit` function that contains the core logic of the `git_diff_merge` implementation. The new version doesn't actually have significantly different behavior, but the logic should be much more obvious, I think. 3. Fixed a bug in `git_diff_merge` where it freed a string pool while some of the string data was still in use. This led to `git_diff_print_patch` accessing memory that had been freed. The rest of this commit contains improved documentation in `diff.h` to make the behavior and the equivalencies with core git clearer, and a bunch of new tests to cover the various cases, oh and a minor simplification of `examples/diff.c`.

3f035860

2012-06-07T22:43:03

misc: Fix warnings from PVS Studio trial

d73c94b2

2012-05-19T20:24:55

Fix spelling errors.

d1c4312a

2012-05-03T22:21:08

diff: improve git_diff_blobs() documentation

28ef7f9b

2012-05-03T17:25:01

diff: make git_diff_blobs() able to detect binary blobs

40879fac

2012-05-02T15:59:02

Merge branch 'new-error-handling' into development Conflicts: .travis.yml include/git2/diff.h src/config_file.c src/diff.c src/diff_output.c src/mwindow.c src/path.c tests-clar/clar_helpers.c tests-clar/object/tree/frompath.c tests/t00-core.c tests/t03-objwrite.c tests/t08-tag.c tests/t10-refs.c tests/t12-repo.c tests/t18-status.c tests/test_helpers.c tests/test_main.c

16b83019

2012-03-04T23:28:36

Fix usage of "new" for fieldname in public header This should restore the ability to include libgit2 headers in C++ projects. Cherry picked 2de60205dfea2c4a422b2108a5e8605f97c2e895 from development into new-error-handling.

1d2dd864

2012-04-29T19:42:51

diff: provide more context to the consumer of the callbacks Update the callback to provide some information related to the file change being processed and the range of the hunk, when applicable.

4b136a94

2012-03-23T09:26:09

Fix crash in new status and add recurse option This fixes the bug that @nulltoken found (thank you!) where if there were untracked directories alphabetically after the last tracked item, the diff implementation would deref a NULL pointer. The fix involved the code which decides if it is necessary to recurse into a directory in the working dir, so it was easy to add a new option `GIT_STATUS_OPT_RECURSE_UNTRACKED_DIRS` to control if the contents of untracked directories should be included in status.

66142ae0

2012-03-22T10:44:36

New status fixes This adds support for roughly-right tracking of submodules (although it does not recurse into submodules to detect internal modifications a la core git), and it adds support for including unmodified files in diff iteration if requested.

7826d577

2012-03-21T10:00:54

diff_output: remove unused parameter Signed-off-by: schu <schu-github@schulog.org>

2de60205

2012-03-04T23:28:36

Fix usage of "new" for fieldname in public header This should restore the ability to include libgit2 headers in C++ projects.

e1bcc191

2012-03-01T11:45:00

Revert GIT_STATUS constants to avoid issues This reverts the changes to the GIT_STATUS constants and adds a new enumeration to describe the type of change in a git_diff_delta. I don't love this solution, but it should prevent strange errors from occurring for now. Eventually, I would like to unify the various status constants, but it needs a larger plan and I just wanted to eliminate this breakage quickly.

74fa4bfa

2012-02-28T16:14:47

Update diff to use iterators This is a major reorganization of the diff code. This changes the diff functions to use the iterators for traversing the content. This allowed a lot of code to be simplified. Also, this moved the functions relating to outputting a diff into a new file (diff_output.c). This includes a number of other changes - adding utility functions, extending iterators, etc. plus more tests for the diff code. This also takes the example diff.c program much further in terms of emulating git-diff command line options.

a2e895be

2012-02-07T12:14:28

Continue implementation of git-diff * Implemented git_diff_index_to_tree * Reworked git_diff_options structure to handle more options * Made most of the options in git_diff_options actually work * Reorganized code a bit to remove some redundancy * Added option parsing to examples/diff.c to test most options

3a437590

2012-02-03T16:53:01

Clean up diff implementation for review This fixes several bugs, updates tests and docs, eliminates the FILE* assumption in favor of printing callbacks for the diff patch formatter helpers, and adds a "diff" example function that can perform a diff from the command line.

cd33323b

2012-01-27T11:29:25

Initial implementation of git_diff_blob This gets the basic plumbing in place for git_diff_blob. There is a known issue where additional parameters like the number of lines of context to display on the diff are not working correctly (which leads one of the new unit tests to fail).

65b09b1d

2012-02-02T18:03:43

Implement diff lists and formatters This reworks the diff API to separate the steps of producing a diff descriptions from formatting the diff. This will allow us to share diff output code with the various diff creation scenarios and will allow us to implement rename detection as an optional pass that can be run on a diff list.

thodg/libgit2/include/git2/diff.h

include/git2/diff.h

Log