|
e7a1fd88
|
2020-03-26T11:42:47
|
|
Fix spelling error
Signed-off-by: Utkarsh Gupta <utkarsh@debian.org>
|
|
502e5d51
|
2020-03-01T12:44:39
|
|
httpclient: use a 16kb read buffer for macOS
Use a 16kb read buffer for compatibility with macOS SecureTransport.
SecureTransport `SSLRead` has the following behavior:
1. It will return _at most_ one TLS packet's worth of data, and
2. It will try to give you as much data as you asked for
This means that if you call `SSLRead` with a buffer size that is smaller
than what _it_ reads (in other words, the maximum size of a TLS packet),
then it will buffer that data for subsequent calls. However, it will
also attempt to give you as much data as you requested in your SSLRead
call. This means that it will guarantee a network read in the event
that it has buffered data.
Consider our 8kb buffer and a server sending us 12kb of data on an HTTP
Keep-Alive session. Our first `SSLRead` will read the TLS packet off
the network. It will return us the 8kb that we requested and buffer the
remaining 4kb. Our second `SSLRead` call will see the 4kb that's
buffered and decide that it could give us an additional 4kb. So it will
do a network read.
But there's nothing left to read; that was the end of the data. The
HTTP server is waiting for us to provide a new request. The server will
eventually time out, our `read` system call will return, `SSLRead` can
return back to us and we can make progress.
While technically correct, this is wildly ineffecient. (Thanks, Tim
Apple!)
Moving us to use an internal buffer that is the maximum size of a TLS
packet (16kb) ensures that `SSLRead` will never buffer and it will
always return everything that it read (albeit decrypted).
|
|
ebade233
|
2020-02-24T21:49:43
|
|
transports: auth_ntlm: fix use of strdup/strndup
In the NTLM authentication code, we accidentally use strdup(3P) and
strndup(3P) instead of our own wrappers git__strdup and git__strndup,
respectively.
Fix the issue by using our own functions.
|
|
|
46228d86
|
2020-02-06T11:10:27
|
|
transports: http: fix custom headers not being applied
In commit b9c5b15a7 (http: use the new httpclient, 2019-12-22), the HTTP
code got refactored to extract a generic HTTP client that operates
independently of the Git protocol. Part of refactoring was the creation
of a new `git_http_request` struct that encapsulates the generation of
requests. Our Git-specific HTTP transport was converted to use that in
`generate_request`, but during the process we forgot to set up custom
headers for the `git_http_request` and as a result we do not send out
these headers anymore.
Fix the issue by correctly setting up the request's custom headers and
add a test to verify we correctly send them.
|
|
|
3f54ba8b
|
2020-01-18T13:51:40
|
|
credential: change git_cred to git_credential
We avoid abbreviations where possible; rename git_cred to
git_credential.
In addition, we have standardized on a trailing `_t` for enum types,
instead of using "type" in the name. So `git_credtype_t` has become
`git_credential_t` and its members have become `GIT_CREDENTIAL` instead
of `GIT_CREDTYPE`.
Finally, the source and header files have been renamed to `credential`
instead of `cred`.
Keep previous name and values as deprecated, and include the new header
files from the previous ones.
|
|
|
e9cef7c4
|
2020-01-11T23:53:45
|
|
http: introduce GIT_ERROR_HTTP
Disambiguate between general network problems and HTTP problems in error
codes.
|
|
|
29762e40
|
2020-01-01T16:14:37
|
|
httpclient: use defines for status codes
|
|
|
76fd406a
|
2019-12-26T16:37:01
|
|
http: send probe packets
When we're authenticating with a connection-based authentication scheme
(NTLM, Negotiate), we need to make sure that we're still connected
between the initial GET where we did the authentication and the POST
that we're about to send. Our keep-alive session may have not kept
alive, but more likely, some servers do not authenticate the entire
keep-alive connection and may have "forgotten" that we were
authenticated, namely Apache and nginx.
Send a "probe" packet, that is an HTTP POST request to the upload-pack
or receive-pack endpoint, that consists of an empty git pkt ("0000").
If we're authenticated, we'll get a 200 back. If we're not, we'll get a
401 back, and then we'll resend that probe packet with the first step of
our authentication (asking to start authentication with the given
scheme). We expect _yet another_ 401 back, with the authentication
challenge.
Finally, we will send our authentication response with the actual POST
data. This will allow us to authenticate without draining the POST data
in the initial request that gets us a 401.
|
|
|
b9c5b15a
|
2019-12-22T14:12:24
|
|
http: use the new httpclient
Untangle the notion of the http transport from the actual http
implementation. The http transport now uses the httpclient.
|
|
|
7372573b
|
2019-10-25T12:22:10
|
|
httpclient: support expect/continue
Allow users to opt-in to expect/continue handling when sending a POST
and we're authenticated with a "connection-based" authentication
mechanism like NTLM or Negotiate.
If the response is a 100, return to the caller (to allow them to post
their body). If the response is *not* a 100, buffer the response for
the caller.
HTTP expect/continue is generally safe, but some legacy servers
have not implemented it correctly. Require it to be opt-in.
|
|
|
6c21c989
|
2019-12-14T21:32:07
|
|
httpclient: support CONNECT proxies
Fully support HTTP proxies, in particular CONNECT proxies, that allow us
to speak TLS through a proxy.
|
|
|
6b208836
|
2019-12-18T21:55:28
|
|
httpclient: handle chunked responses
Detect responses that are sent with Transfer-Encoding: chunked, and
record that information so that we can consume the entire message body.
|
|
|
6a095679
|
2019-12-14T10:34:36
|
|
httpclient: support authentication
Store the last-seen credential challenges (eg, all the
'WWW-Authenticate' headers in a response message). Given some
credentials, find the best (first) challenge whose mechanism supports
these credentials. (eg, 'Basic' supports username/password credentials,
'Negotiate' supports default credentials).
Set up an authentication context for this mechanism and these
credentials. Continue exchanging challenge/responses until we're
authenticated.
|
|
|
1152f361
|
2019-12-13T18:37:19
|
|
httpclient: consume final chunk message
When sending a new request, ensure that we got the entirety of the
response body. Our caller may have decided that they were done reading.
If we were not at the end of the message, this means that we need to
tear down the connection and cannot do keep-alive.
However, if the caller read all of the message, but we still have a
final end-of-response chunk signifier (ie, "0\r\n\r\n") on the socket,
then we should consider that the response was successfully copmleted.
If we're asked to send a new request, try to read from the socket, just
to clear out that end-of-chunk message, marking ourselves as
disconnected on any errors.
|
|
|
84b99a95
|
2019-12-12T13:53:43
|
|
httpclient: add chunk support to POST
Teach httpclient how to support chunking when POSTing request bodies.
|
|
|
eacecebd
|
2019-12-12T13:25:32
|
|
httpclient: introduce a simple http implementation
Introduce a new http client implementation that can GET and POST to
remote URLs.
Consumers can use `git_http_client_init` to create a new client,
`git_http_client_send_request` to send a request to the remote server
and `git_http_client_read_response` to read the response.
The http client implementation will perform the I/O with the remote
server (http or https) but does not understand the git smart transfer
protocol. This allows us to split the concerns of the http subtransport
from the actual http implementation.
|
|
|
471daeea
|
2019-12-01T14:00:49
|
|
net: refactor gitno redirect handling
Move the redirect handling into `git_net_url` for consistency.
|
|
|
a194e17f
|
2019-11-27T18:43:36
|
|
winhttp: refactor request sending
Clarify what it means to not send a length; this allows us to refactor
requests further.
|
|
|
7e0f5a6a
|
2019-10-22T22:37:14
|
|
smart protocol: correct case in error messages
|
|
|
2d6a61bd
|
2019-10-22T09:52:31
|
|
gssapi: validate that we were requested Negotiate
|
|
|
e761df5c
|
2019-10-22T09:35:48
|
|
gssapi: dispose after completion for retry
Disposal pattern; dispose on completion, allowing us to retry
authentication, which may happen on web servers that close
connection-based authenticated sessions (NTLM/SPNEGO) unexpectedly.
|
|
5625892b
|
2019-09-20T12:06:11
|
|
gssapi: delete half-built security context so auth can continue
|
|
|
2174aa0a
|
2019-10-21T11:47:23
|
|
gssapi: correct incorrect case in error message
|
|
|
3f6fe054
|
2019-10-20T17:23:01
|
|
gssapi: protect GSS_ERROR macro
The GSS_ERROR(x) macro may expand to `(x & value)` on some
implementations, instead of `((x) & value)`. This is the case on macOS,
which means that if we attempt to wrap an expression in that macro, like
`a = b`, then that would expand to `(a = b & value)`.
Since `&` has a higher precedence, this is not at all what we want, and
will set our result code to an incorrect value. Evaluate the expression
then test it with `GSS_ERROR` independently to avoid this.
|
|
|
73fe690d
|
2019-10-20T17:22:27
|
|
gssapi: protect against empty messages
|
|
|
917ba762
|
2020-01-18T14:14:00
|
|
auth: update enum type name for consistency
libgit2 does not use `type_t` suffixes as it's redundant; thus, rename
`git_http_authtype_t` to `git_http_auth_t` for consistency.
|
|
|
dbb6429c
|
2020-01-10T14:30:18
|
|
Merge pull request #5305 from kas-luthor/bugfix/multiple-auth
Adds support for multiple SSH auth mechanisms being used sequentially
|
|
|
33f93bf3
|
2020-01-06T11:53:53
|
|
Merge pull request #5325 from josharian/no-double-slash
http: avoid generating double slashes in url
|
|
05c1fb8a
|
2019-12-06T11:04:40
|
|
http: avoid generating double slashes in url
Prior to this change, given a remote url with a trailing slash,
such as http://localhost/a/, service requests would contain a
double slash: http://localhost/a//info/refs?service=git-receive-pack.
Detect and prevent that.
Updates #5321
|
|
cb7fd1ed
|
2019-12-13T15:11:38
|
|
Fixes code styling
|
|
|
86852613
|
2019-12-13T12:13:05
|
|
smart_pkt: fix overflow resulting in OOB read/write of one byte
When parsing OK packets, we copy any information after the initial "ok "
prefix into the resulting packet. As newlines act as packet boundaries,
we also strip the trailing newline if there is any. We do not check
whether there is any data left after the initial "ok " prefix though,
which leads to a pointer overflow in that case as `len == 0`:
if (line[len - 1] == '\n')
--len;
This out-of-bounds read is a rather useless gadget, as we can only
deduce whether at some offset there is a newline character. In case
there accidentally is one, we overflow `len` to `SIZE_MAX` and then
write a NUL byte into an array indexed by it:
pkt->ref[len] = '\0';
Again, this doesn't seem like something that's possible to be exploited
in any meaningful way, but it may surely lead to inconsistencies or DoS.
Fix the issue by checking whether there is any trailing data after the
packet prefix.
|
|
48c3f7e1
|
2019-11-20T11:21:14
|
|
ssh: include sha256 host key hash when supported
|
|
|
fbdf5bdd
|
2019-11-16T22:41:25
|
|
Adds support for multiple SSH auth mechanisms being used sequentially
|
|
3f998aee
|
2019-10-26T17:21:29
|
|
Follow 308 redirect in WinHTTP transport
|
|
dbc17a7e
|
2019-09-21T08:46:08
|
|
negotiate: use GSS.framework on macOS
|
|
|
49a3289e
|
2019-09-21T08:25:23
|
|
cred: add missing private header in GSSAPI block
Should have been part of 8bf0f7eb26c65b2b937b1f40a384b9b269b0b76d
|
|
|
8bf0f7eb
|
2019-09-09T13:00:27
|
|
cred: separate public interface from low-level details
|
|
|
5d8a4659
|
2019-09-13T10:31:49
|
|
Merge pull request #5195 from tiennou/fix/commitish-smart-push
smart: use push_glob instead of manual filtering
|
|
|
39028eb6
|
2019-09-09T13:00:53
|
|
Merge pull request #5212 from libgit2/ethomson/creds_for_scheme
Use an HTTP scheme that supports the given credentials
|
|
4de51f9e
|
2019-08-23T16:05:28
|
|
http: ensure the scheme supports the credentials
When a server responds with multiple scheme support - for example,
Negotiate and NTLM are commonly used together - we need to ensure that
we choose a scheme that supports the credentials.
|
|
|
53f51c60
|
2019-08-21T19:48:05
|
|
smart: implement by-date insertion when revwalking
|
|
|
c2dd895a
|
2019-08-08T10:47:29
|
|
transports: http: check for memory allocation failures
When allocating a chunk that is used to write to HTTP streams, we do not
check for memory allocation errors. This may lead us to write to a
`NULL` pointer and thus cause a segfault.
Fix this by adding a call to `GIT_ERROR_CHECK_ALLOC`.
|
|
|
1c847169
|
2019-08-21T16:38:59
|
|
http: allow dummy negotiation scheme to fail to act
The dummy negotiation scheme is used for known authentication strategies
that do not wish to act. For example, when a server requests the
"Negotiate" scheme but libgit2 is not built with Negotiate support, and
will use the "dummy" strategy which will simply not act.
Instead of setting `out` to NULL and returning a successful code, return
`GIT_PASSTHROUGH` to indicate that it did not act and catch that error
code.
|
|
|
39d18fe6
|
2019-07-31T08:37:10
|
|
smart: use push_glob instead of manual filtering
The code worked under the assumption that anything under `refs/tags` are
tag objects, and all the rest would be peelable to a commit. As it is
completely valid to have tags to blobs under a non `refs/tags` ref, this
would cause failures when trying to peel a tag to a commit.
Fix the broken filtering by switching to `git_revwalk_push_glob`, which
already handles this case.
|
|
|
3cd123e9
|
2019-06-15T21:56:53
|
|
win32: define DWORD_MAX if it's not defined
MinGW does not define DWORD_MAX. Specify it when it's not defined.
|
|
|
d93b0aa0
|
2019-06-15T21:47:40
|
|
win32: decorate unused parameters
|
|
|
8c925ef8
|
2019-05-21T14:30:28
|
|
smart protocol: validate progress message length
Ensure that the server has not sent us overly-large sideband messages
(ensure that they are no more than `INT_MAX` bytes), then cast to `int`.
|
|
|
7afe788c
|
2019-05-21T14:27:46
|
|
smart transport: use size_t for sizes
|
|
|
db7f1d9b
|
2019-05-21T14:21:58
|
|
local transport: cast message size to int explicitly
Our progress information messages are short (and bounded by their format
string), cast the length to int for callers.
|
|
|
8048ba70
|
2019-05-21T14:18:40
|
|
winhttp: safely cast length to DWORD
|
|
|
2a4bcf63
|
2019-06-23T18:24:23
|
|
errors: use lowercase
Use lowercase for our error messages, per our custom.
|
|
|
5d92e547
|
2019-06-08T17:28:35
|
|
oid: `is_zero` instead of `iszero`
The only function that is named `issomething` (without underscore) was
`git_oid_iszero`. Rename it to `git_oid_is_zero` for consistency with
the rest of the library.
|
|
|
0b5ba0d7
|
2019-06-06T16:36:23
|
|
Rename opt init functions to `options_init`
In libgit2 nomenclature, when we need to verb a direct object, we name
a function `git_directobject_verb`. Thus, if we need to init an options
structure named `git_foo_options`, then the name of the function that
does that should be `git_foo_options_init`.
The previous names of `git_foo_init_options` is close - it _sounds_ as
if it's initializing the options of a `foo`, but in fact
`git_foo_options` is its own noun that should be respected.
Deprecate the old names; they'll now call directly to the new ones.
|
|
|
7ea8630e
|
2019-04-07T20:11:59
|
|
http: free auth context on failure
When we send HTTP credentials but the server rejects them, tear down the
authentication context so that we can start fresh. To maintain this
state, additionally move all of the authentication handling into
`on_auth_required`.
|
|
|
005b5bc2
|
2019-04-07T17:55:23
|
|
http: reconnect to proxy on connection close
When we're issuing a CONNECT to a proxy, we expect to keep-alive to the
proxy. However, during authentication negotiations, the proxy may close
the connection. Reconnect if the server closes the connection.
|
|
|
d171fbee
|
2019-04-07T17:40:23
|
|
http: allow server to drop a keepalive connection
When we have a keep-alive connection to the server, that server may
legally drop the connection for any reason once a successful request and
response has occurred. It's common for servers to drop the connection
after some amount of time or number of requests have occurred.
|
|
|
9af1de5b
|
2019-03-24T20:49:57
|
|
http: stop on server EOF
We stop the read loop when we have read all the data. We should also
consider the server's feelings.
If the server hangs up on us, we need to stop our read loop. Otherwise,
we'll try to read from the server - and fail - ad infinitum.
|
|
|
539e6293
|
2019-03-22T19:06:46
|
|
http: teach auth mechanisms about connection affinity
Instead of using `is_complete` to decide whether we have connection or
request affinity for authentication mechanisms, set a boolean on the
mechanism definition itself.
|
|
|
3e0b4b43
|
2019-03-22T18:52:03
|
|
http: maintain authentication across connections
For request-based authentication mechanisms (Basic, Digest) we should
keep the authentication context alive across socket connections, since
the authentication headers must be transmitted with every request.
However, we should continue to remove authentication contexts for
mechanisms with connection affinity (NTLM, Negotiate) since we need to
reauthenticate for every socket connection.
|
|
|
ce72ae95
|
2019-03-22T10:53:30
|
|
http: simplify authentication mechanisms
Hold an individual authentication context instead of trying to maintain
all the contexts; we can select the preferred context during the initial
negotiation.
Subsequent authentication steps will re-use the chosen authentication
(until such time as it's rejected) instead of trying to manage multiple
contexts when all but one will never be used (since we can only
authenticate with a single mechanism at a time.)
Also, when we're given a 401 or 407 in the middle of challenge/response
handling, short-circuit immediately without incrementing the retry
count. The multi-step authentication is expected, and not a "retry" and
should not be penalized as such.
This means that we don't need to keep the contexts around and ensures
that we do not unnecessarily fail for too many retries when we have
challenge/response auth on a proxy and a server and potentially
redirects in play as well.
|
|
|
6d931ba7
|
2019-03-22T16:35:59
|
|
http: don't set the header in the auth token
|
|
|
10718526
|
2019-03-09T13:53:16
|
|
http: don't reset replay count after connection
A "connection" to a server is transient, and we may reconnect to a
server in the midst of authentication failures (if the remote indicates
that we should, via `Connection: close`) or in a redirect.
|
|
|
3192e3c9
|
2019-03-07T16:57:11
|
|
http: provide an NTLM authentication provider
|
|
|
79fc8281
|
2019-03-21T16:49:25
|
|
http: validate server's authentication types
Ensure that the server supports the particular credential type that
we're specifying. Previously we considered credential types as an
input to an auth mechanism - since the HTTP transport only supported
default credentials (via negotiate) and username/password credentials
(via basic), this worked. However, if we are to add another mechanism
that uses username/password credentials, we'll need to be careful to
identify the types that are accepted.
|
|
|
5ad99210
|
2019-03-07T16:43:45
|
|
http: consume body on proxy auth failure
We must always consume the full parser body if we're going to
keep-alive. So in the authentication failure case, continue advancing
the http message parser until it's complete, then we can retry the
connection.
Not doing so would mean that we have to tear the connection down and
start over. Advancing through fully (even though we don't use the data)
will ensure that we can retry a connection with keep-alive.
|
|
|
75b20458
|
2019-03-07T16:34:55
|
|
http: always consume body on auth failure
When we get an authentication failure, we must consume the entire body
of the response. If we only read half of the body (on the assumption
that we can ignore the rest) then we will never complete the parsing of
the message. This means that we will never set the complete flag, and
our replay must actually tear down the connection and try again.
This is particularly problematic for stateful authentication mechanisms
(SPNEGO, NTLM) that require that we keep the connection alive.
Note that the prior code is only a problem when the 401 that we are
parsing is too large to be read in a single chunked read from the http
parser.
But now we will continue to invoke the http parser until we've got a
complete message in the authentication failed scenario. Note that we
need not do anything with the message, so when we get an authentication
failed, we'll stop adding data to our buffer, we'll simply loop in the
parser and let it advance its internal state.
|
|
|
e87f912b
|
2019-03-21T15:29:52
|
|
http: don't realloc the request
|
|
|
10e8fe55
|
2019-03-21T13:55:54
|
|
transports: add an `is_complete` function for auth
Some authentication mechanisms (like HTTP Basic and Digest) have a
one-step mechanism to create credentials, but there are more complex
mechanisms like NTLM and Negotiate that require challenge/response after
negotiation, requiring several round-trips. Add an `is_complete`
function to know when they have round-tripped enough to be a single
authentication and should now either have succeeded or failed to
authenticate.
|
|
|
9050c69c
|
2019-03-09T17:24:16
|
|
http: examine keepalive status at message end
We cannot examine the keep-alive status of the http parser in
`http_connect`; it's too late and the critical information about whether
keep-alive is supported has been destroyed.
Per the documentation for `http_should_keep_alive`:
> If http_should_keep_alive() in the on_headers_complete or
> on_message_complete callback returns 0, then this should be
> the last message on the connection.
Query then and set the state.
|
|
|
956ba48b
|
2019-03-14T10:36:40
|
|
http: increase the replay count
Increase the permissible replay count; with multiple-step authentication
schemes (NTLM, Negotiate), proxy authentication and redirects, we need
to be mindful of the number of steps it takes to get connected.
7 seems high but can be exhausted quickly with just a single authentication
failure over a redirected multi-state authentication pipeline.
|
|
|
ee3d35cf
|
2019-04-07T19:15:21
|
|
http: support https for proxies
|
|
|
3d11b6c5
|
2019-03-11T20:36:09
|
|
winhttp: support default credentials for proxies
We did not properly support default credentials for proxies, only for
destination servers. Refactor the credential handling to support sending
either username/password _or_ default credentials to either the proxy or
the destination server.
This actually shares the authentication logic between proxy servers and
destination servers. Due to copy/pasta drift over time, they had
diverged. Now they share a common logic which is: first, use
credentials specified in the URL (if there were any), treating empty
username and password (ie, "http://:@foo.com/") as default credentials,
for compatibility with git. Next, call the credential callbacks.
Finally, fallback to WinHTTP compatibility layers using built-in
authentication like we always have.
Allowing default credentials for proxies requires moving the security
level downgrade into the credential setting routines themselves.
We will update our security level to "high" by default which means that
we will never send default credentials without prompting. (A lower
setting, like the WinHTTP default of "medium" would allow WinHTTP to
handle credentials for us, despite what a user may have requested with
their structures.) Now we start with "high" and downgrade to "low" only
after a user has explicitly requested default credentials.
|
|
|
c6ab183e
|
2019-03-11T11:43:08
|
|
net: rename gitno_connection_data to git_net_url
"Connection data" is an imprecise and largely incorrect name; these
structures are actually parsed URLs. Provide a parser that takes a URL
string and produces a URL structure (if it is valid).
Separate the HTTP redirect handling logic from URL parsing, keeping a
`gitno_connection_data_handle_redirect` whose only job is redirect
handling logic and does not parse URLs itself.
|
|
|
810cefd9
|
2019-06-08T17:14:00
|
|
credentials: suffix the callbacks with `_cb`
The credential callbacks should match the other callback naming
conventions, using the `_cb` suffix instead of a `_callback` suffix.
|
|
|
b51789ac
|
2019-04-16T13:20:08
|
|
transports: make use of the `GIT_CONTAINER_OF` macro
|
|
|
59001e83
|
2019-02-21T11:41:19
|
|
remote: rename git_push_transfer_progress callback
The `git_push_transfer_progress` is a callback and as such should be
suffixed with `_cb` for consistency. Rename
`git_push_transfer_progress` to `git_push_transfer_progress_cb`.
|
|
|
a1ef995d
|
2019-02-21T10:33:30
|
|
indexer: use git_indexer_progress throughout
Update internal usage of `git_transfer_progress` to
`git_indexer_progreses`.
|
|
|
5265b31c
|
2019-01-23T15:00:20
|
|
streams: fix callers potentially only writing partial data
Similar to the write(3) function, implementations of `git_stream_write`
do not guarantee that all bytes are written. Instead, they return the
number of bytes that actually have been written, which may be smaller
than the total number of bytes. Furthermore, due to an interface design
issue, we cannot ever write more than `SSIZE_MAX` bytes at once, as
otherwise we cannot represent the number of bytes written to the caller.
Unfortunately, no caller of `git_stream_write` ever checks the return
value, except to verify that no error occurred. Due to this, they are
susceptible to the case where only partial data has been written.
Fix this by introducing a new function `git_stream__write_full`. In
contrast to `git_stream_write`, it will always return either success or
failure, without returning the number of bytes written. Thus, it is able
to write all `SIZE_MAX` bytes and loop around `git_stream_write` until
all data has been written. Adjust all callers except the BIO callbacks
in our mbedtls and OpenSSL streams, which already do the right thing and
require the amount of bytes written.
|
|
|
4947216f
|
2019-01-21T11:11:27
|
|
git transport: only write INT_MAX bytes
The transport code returns an `int` with the number of bytes written;
thus only attempt to write at most `INT_MAX`.
|
|
bff7aed2
|
2019-01-24T16:44:04
|
|
Don't use deprecated constants
Follow up for PR #4917.
Signed-off-by: Sven Strickroth <email@cs-ware.de>
|
|
|
f673e232
|
2018-12-27T13:47:34
|
|
git_error: use new names in internal APIs and usage
Move to the `git_error` name in the internal API for error-related
functions.
|
|
|
1758636b
|
2019-01-19T01:38:34
|
|
Merge pull request #4939 from libgit2/ethomson/git_ref
Move `git_ref_t` to `git_reference_t`
|
|
|
abe23675
|
2019-01-17T20:09:05
|
|
Merge pull request #4925 from lhchavez/fix-a-bunch-of-warnings
Fix a bunch of warnings
|
|
|
ed8cfbf0
|
2019-01-17T00:32:31
|
|
references: use new names in internal usage
Update internal usage to use the `git_reference` names for constants.
|
|
35d86c77
|
2019-01-14T10:14:36
|
|
proxy: fix crash on remote connection with GIT_PROXY_AUTO but no proxy is detected
|
|
321d19c1
|
2019-01-06T08:36:06
|
|
Windows is hard.
|
|
|
7b453e7e
|
2019-01-05T22:12:48
|
|
Fix a bunch of warnings
This change fixes a bunch of warnings that were discovered by compiling
with `clang -target=i386-pc-linux-gnu`. It turned out that the
intrinsics were not necessarily being used in all platforms! Especially
in GCC, since it does not support __has_builtin.
Some more warnings were gleaned from the Windows build, but I stopped
when I saw that some third-party dependencies (e.g. zlib) have warnings
of their own, so we might never be able to enable -Werror there.
|
|
|
168fe39b
|
2018-11-28T14:26:57
|
|
object_type: use new enumeration names
Use the new object_type enumeration names within the codebase.
|
|
|
30ac46aa
|
2018-11-28T10:12:43
|
|
http: reset replay_count upon connection
Reset the replay_count upon a successful connection. It's possible that
we could encounter a situation where we connect successfully but need to
replay a request - for example, a connection and initial request
succeeds without authentication but a subsequent call does require
authentication. Reset the replay count upon any successful request to
afford subsequent replays room to manuever.
|
|
|
52478d7d
|
2018-11-18T19:54:49
|
|
http: don't allow SSL connections to a proxy
Temporarily disallow SSL connections to a proxy until we can understand
the valgrind warnings when tunneling OpenSSL over OpenSSL.
|
|
|
41f620d9
|
2018-11-18T19:10:50
|
|
http: only load proxy configuration during connection
Only load the proxy configuration during connection; we need this data
when we're going to connect to the server, however we may mutate it
after connection (connecting through a CONNECT proxy means that we
should send requests like normal). If we reload the proxy configuration
but do not actually reconnect (because we're in a keep-alive session)
then we will reload the proxy configuration that we should have mutated.
Thus, only load the proxy configuration when we know that we're going to
reconnect.
|
|
|
0467606f
|
2018-11-18T11:00:11
|
|
http: disallow repeated headers from servers
Don't allow servers to send us multiple Content-Type, Content-Length
or Location headers.
|
|
|
21142c5a
|
2018-10-29T10:04:48
|
|
http: remove cURL
We previously used cURL to support HTTP proxies. Now that we've added
this support natively, we can remove the curl dependency.
|
|
|
5d4e1e04
|
2018-10-28T21:27:56
|
|
http: use CONNECT to talk to proxies
Natively support HTTPS connections through proxies by speaking CONNECT
to the proxy and then adding a TLS connection on top of the socket.
|
|
|
43b592ac
|
2018-10-25T08:49:01
|
|
tls: introduce a wrap function
Introduce `git_tls_stream_wrap` which will take an existing `stream`
with an already connected socket and begin speaking TLS on top of it.
This is useful if you've built a connection to a proxy server and you
wish to begin CONNECT over it to tunnel a TLS connection.
Also update the pluggable TLS stream layer so that it can accept a
registration structure that provides an `init` and `wrap` function,
instead of a single initialization function.
|
|
|
b2ed778a
|
2018-11-18T22:20:10
|
|
http transport: reset error message on cert failure
Store the error message from the underlying TLS library before calling
the certificate callback. If it refuses to act (demonstrated by
returning GIT_PASSTHROUGH) then restore the error message. Otherwise,
if the callback does not set an error message, set a sensible default
that implicates the callback itself.
|
|
|
2ce2315c
|
2018-10-22T17:33:45
|
|
http transport: support cert check for proxies
Refactor certificate checking so that it can easily be called for
proxies or the remote server.
|
|
|
74c6e08e
|
2018-10-22T14:56:53
|
|
http transport: provide proxy credentials
|
|
|
496da38c
|
2018-10-22T12:48:45
|
|
http transport: refactor storage
Create a simple data structure that contains information about the
server being connected to, whether that's the actual remote endpoint
(git server) or an intermediate proxy. This allows for organization of
streams, authentication state, etc.
|
|
|
6af8572c
|
2018-10-22T11:29:01
|
|
http transport: cap number of authentication replays
Put a limit on the number of authentication replays in the HTTP
transport. Standardize on 7 replays for authentication or redirects,
which matches the behavior of the WinHTTP transport.
|