kmx git

Commit	Date	Message
238b7614	2013-08-16T13:31:24	Fix p_inet_pton on windows p_inet_pton on Windows should set errno properly for callers. Rewrite p_inet_pton to handle error cases correctly and add test cases to exercise this function.
d730d3f4	2013-07-31T16:40:42	Major rename detection changes After doing further profiling, I found that a lot of time was being spent attempting to insert hashes into the file hash signature when using the rolling hash because the rolling hash approach generates a hash per byte of the file instead of one per run/line of data. To optimize this, I decided to convert back to a run-based file signature algorithm which would be more like core Git. After changing this, a number of the existing tests started to fail. In some cases, this appears to have been because the test was coded to be too specific to the particular results of the file similarity metric and in some cases there appear to have been bugs in the core rename detection code where only by the coincidence of the file similarity scoring were the expected results being generated. This renames all the variables in the core rename detection code to be more consistent and hopefully easier to follow which made it a bit easier to reason about the behavior of that code and fix the problems that I was seeing. I think it's in better shape now. There are a couple of tests now that attempt to stress test the rename detection code and they are quite slow. Most of the time is spent setting up the test data on disk and in the index. When we roll out performance improvements for index insertion, it should also speed up these tests I hope.
6fc5a581	2013-07-08T22:42:02	Basic bit vector This is a simple bit vector object that is not resizable after the initial allocation but can be of arbitrary size. It will keep the bti vector entirely on the stack for vectors 64 bits or less, and will allocate the vector on the heap for larger sizes. The API is uniform regardless of storage location. This is very basic right now and all the APIs are inline functions, but it is useful for storing an array of boolean values.
290e1479	2013-07-09T16:17:41	Add GIT_CAP_SSH if library was built with SSH This also adds a test that actually calls git_libgit2_capabilities and git_libgit2_version.
e3b4a47c	2013-05-31T16:30:09	git__strcasesort_cmp: strcasecmp sorting rules but requires strict equality
2d160ef7	2013-05-29T16:03:30	allow (ignore) bare slash in gitignore
aa8f0101	2013-04-29T08:59:46	Add git_oid_strcmp and use it for git_oid_streq Add a new git_oid_strcmp that compares a string OID with a hex oid for sort order, and then reimplement git_oid_streq using it. This actually should speed up git_oid_streq because it only reads as far into the string as it needs to, whereas previously it would convert the whole string into an OID and then use git_oid_cmp.
8564a022	2013-04-29T08:51:24	Fix fragile git_oid_ncmp git_oid_ncmp was making some assumptions about the length of the data - this shifts the check to the top of the loop so it will work more robustly, limits the max, and adds some tests to verify the functionality.
917f60c5	2013-04-12T13:04:08	Add tests for oidmap and new cache with threading This adds some basic tests for the oidmap just to make sure that collisions, etc. are dealt with correctly. This also adds some tests for the new caching that check if items are inserted (or not inserted) properly into the cache, and that the cache can hold up in a multithreaded environment without error.
5df18424	2013-04-01T19:38:23	lol this worked first try wtf
0b061b5b	2013-03-26T11:05:57	Merge pull request #1436 from schu/opts-cache-size opts: allow configuration of odb cache size
3658e81e	2013-03-25T14:20:07	Move crlf conversion into buf_text This adds crlf/lf conversion functions into buf_text with more efficient implementations that bypass the high level buffer functions. They attempt to minimize the number of reallocations done and they directly write the buffer data as needed if they know that there is enough memory allocated to memcpy data. Tests are added for these new functions. The crlf.c code is updated to use the new functions. Removed the include of buf_text.h from filter.h and just include it more narrowly in the places that need it.
13640d1b	2013-03-25T21:39:11	oid: Do not parse OIDs longer than 40
f5e28202	2013-03-25T13:38:43	opts: allow configuration of odb cache size Currently, the odb cache has a fixed size of 128 slots as defined by GIT_DEFAULT_CACHE_SIZE. Allow users to set the size of the cache via git_libgit2_opts(). Fixes #1035.
b3c17483	2013-03-21T14:50:28	Clarified string value
7e527ca7	2013-03-21T12:16:31	Added test case for new function
32460251	2013-03-18T15:54:35	Fixes and cleanups Get rid of some dead code, tighten things up a bit, and fix a bug with core::env test.
41954a49	2013-03-18T14:19:35	Switch search paths to classic delimited strings This switches the APIs for setting and getting the global/system search paths from using git_strarray to using a simple string with GIT_PATH_LIST_SEPARATOR delimited paths, just as the environment PATH variable would contain. This makes it simpler to get and set the value. I also added code to expand "$PATH" when setting a new value to embed the old value of the path. This means that I no longer require separate actions to PREPEND to the value.
5540d947	2013-03-15T16:39:00	Implement global/system file search paths The goal of this work is to expose the search logic for "global", "system", and "xdg" files through the git_libgit2_opts() interface. Behind the scenes, I changed the logic for finding files to have a notion of a git_strarray that represents a search path and to store a separate search path for each of the three tiers of config file. For each tier, I implemented a function to initialize it to default values (generally based on environment variables), and then general interfaces to get it, set it, reset it, and prepend new directories to it. Next, I exposed these interfaces through the git_libgit2_opts interface, reusing the GIT_CONFIG_LEVEL_SYSTEM, etc., constants for the user to control which search path they were modifying. There are alternative designs for the opts interface / argument ordering, so I'm putting this phase out for discussion. Additionally, I ended up doing a little bit of clean up regarding attr.h and attr_file.h, adding a new attrcache.h so the other two files wouldn't have to be included in so many places.
0c468633	2013-03-14T13:40:15	Improved tree iterator internals This updates the tree iterator internals to be more efficient. The tree_iterator_entry objects are now kept as pointers that are allocated from a git_pool, so that we may use git__tsort_r for sorting (which is better than qsort, given that the tree is likely mostly ordered already). Those tree_iterator_entry objects now keep direct pointers to the data they refer to instead of keeping indirect index values. This simplifies a lot of the data structure traversal code. This also adds bsearch to find the start item position for range- limited tree iterators, and is more explicit about using git_path_cmp instead of reimplementing it. The git_path_cmp changed a bit to make it easier for tree_iterators to use it (but it was barely being used previously, so not a big deal). This adds a git_pool_free_array function that efficiently frees a list of pool allocated pointers (which the tree_iterator keeps). Also, added new tests for the git_pool free list functionality that was not previously being tested (or used).
9bc8be3d	2013-02-19T10:25:41	Refine pluggable similarity API This plugs in the three basic similarity strategies for handling whitespace via internal use of the pluggable API. In so doing, I realized that the use of git_buf in the hashsig API was not needed and actually just made it harder to use, so I tweaked that API as well. Note that the similarity metric is still not hooked up in the find_similarity code - this is just setting out the function that will be used.
aa643260	2013-02-15T11:08:02	More tests of file signatures with whitespace opts Seems to be working pretty well...
5e5848eb	2013-02-14T17:25:10	Change similarity metric to sampled hashes This moves the similarity metric code out of buf_text and into a new file. Also, this implements a different approach to similarity measurement based on a Rabin-Karp rolling hash where we only keep the top 100 and bottom 100 hashes. In theory, that should be sufficient samples to given a fairly accurate measurement while limiting the amount of data we keep for file signatures no matter how large the file is.
9c454b00	2013-01-11T22:13:02	Initial implementation of similarity scoring algo This adds a new `git_buf_text_hashsig` type and functions to generate these hash signatures and compare them to give a similarity score. This can be plugged into diff similarity scoring.
56543a60	2013-02-15T16:02:45	Clear up warnings from cppcheck The cppcheck static analyzer generates warnings for a bunch of places in the libgit2 code base. All the ones fixed in this commit are actually false positives, but I've reorganized the code to hopefully make it easier for static analysis tools to correctly understand the structure. I wouldn't do this if I felt like it was making the code harder to read or worse for humans, but in this case, these fixes don't seem too bad and will hopefully make it easier for better analysis tools to get at any real issues.
8c29dca6	2013-02-11T09:25:57	Fix some incorrect MSVC #ifdef's. Fixes #1305
17c92bea	2013-01-29T12:13:24	Test buf join with NULL behavior explicitly
0d52cb4a	2013-01-24T00:09:55	opts: Some basic tests
f63d0ee9	2013-01-17T15:47:10	Move all non-ascii test data to raw hex This takes all of the characters in core::env and makes them use hex sequences instead of keeping tricky character data inline in the test.
0d65acad	2013-01-11T11:24:26	Match binary file check of core git in diff Core git just looks for NUL bytes in files when deciding about is-binary inside diff (although it uses a better algorithm in checkout, when deciding if CRLF conversion should be done). Libgit2 was using the better algorithm in both places, but that is causing some confusion. For now, this makes diff just look for NUL bytes to decide if a file is binary by content in diff.
b8a1ea7c	2013-01-03T11:04:03	Fix core::env cleanup code Mark fake home directories that failed to be created, so we won't try to remove them and have cleanup just use p_rmdir.
600d8dbf	2013-01-03T09:10:38	Move test cleanup into cleanup functions
6fef1ab3	2013-01-03T07:47:51	Tests should clean up after themselves
50a762a5	2012-12-26T12:03:07	path: Teach UNC paths to git_path_dirname_r() Fix libgit2/libgit2sharp#256
34b6f05f	2012-12-26T11:59:07	path: enhance git_path_dirname_r() test coverage
7bf87ab6	2012-11-28T09:58:48	Consolidate text buffer functions There are many scattered functions that look into the contents of buffers to do various text manipulations (such as escaping or unescaping data, calculating text stats, guessing if content is binary, etc). This groups all those functions together into a new file and converts the code to use that. This has two enhancements to existing functionality. The old text stats function is significantly rewritten and the BOM detection code was extended (although largely we can't deal with anything other than a UTF8 BOM).
16248ee2	2012-11-21T11:03:07	Fix up some missing consts in tree & index This fixes some missed places where we can apply const-ness to various public APIs. There are still some index and tree APIs that cannot take const pointers because we sort our `git_vectors` lazily and so we can't reliably bsearch the index and tree content without applying a `git_vector_sort()` first. This also fixes some missed places where size_t can be used and where const can be applied to a couple internal functions.
9094d30b	2012-11-23T11:41:56	Reset all static variables to NULL in clar's __cleanup Without this change, any failed assertion in the second (or a later) test inside a test suite has a chance of double deleting memory, resulting in a heap corruption. See #1096 for details. This leaves alone the test cases where we "just" use cl_git_sandbox_init() and cl_git_sandbox_cleanup(). These methods already take good care to not double delete a repository. Fixes #1096
e566b609	2012-11-20T00:57:56	Update clar tests p_lstat_posixly and p_lstat
0e95e70a	2012-11-17T05:22:39	env: ensure git_futils_find_xxx() returns ENOTFOUND
cccacac5	2012-11-14T22:41:51	Add POSIX compat lstat() variant for win32 The existing p_lstat implementation on win32 is not quite POSIX compliant when setting errno to ENOTDIR. This adds an option to make is be compliant so that code (such as checkout) that cares to have separate behavior for ENOTDIR can use it portably. This also contains a couple of other minor cleanups in the posix_w32.c implementations to avoid unnecessary work.
331e7de9	2012-10-24T17:32:50	Extensions to rmdir and mkdir utilities * Rework GIT_DIRREMOVAL values to GIT_RMDIR flags, allowing combinations of flags * Add GIT_RMDIR_EMPTY_PARENTS flag to remove parent dirs that are left empty after removal * Add GIT_MKDIR_VERIFY_DIR to give an error if item is a file, not a dir (previously an EEXISTS error was ignored, even for files) and enable this flag for git_futils_mkpath2file call * Improve accuracy of error messages from git_futils_mkdir
f45ec1a0	2012-10-29T20:04:21	index refactoring
0d422ec9	2012-10-19T15:40:43	Fix env variable tests with new Win32 path rules The new Win32 global path search was not working with the environment variable tests. But when I fixed the test, the new codes use of getenv() was causing more failures (presumably because of caching on Windows ???). This fixes the global file lookup to always go directly to the Win32 API in a predictable way.
4c47a8bc	2012-10-17T14:14:51	Merge pull request #968 from arrbee/diff-support-typechange Support TYPECHANGE records in status and adjust checkout accordingly
18217e7e	2012-10-16T19:34:29	test: Don't be so picky with failed lookups Not found means not found, and the other way around.
2d3579be	2012-10-10T14:54:31	Add git_buf_put_base64 to buffer API
0d64bef9	2012-10-05T15:56:57	Add complex checkout test and then fix checkout This started as a complex new test for checkout going through the "typechanges" test repository, but that revealed numerous issues with checkout, including: * complete failure with submodules * failure to create blobs with exec bits * problems when replacing a tree with a blob because the tree "example/" sorts after the blob "example" so the delete was being processed after the single file blob was created This fixes most of those problems and includes a number of other minor changes that made it easier to do that, including improving the TYPECHANGE support in diff/status, etc.
1a628100	2012-09-21T15:04:39	Make giterr_set_str public There has been discussion for a while about making some set of the `giterr_set` type functions part of the public API for code that is implementing new backends to libgit2. This makes the `giterr_set_str()` and `giterr_set_oom()` functions public.
2eb4edf5	2012-08-24T10:48:48	Fix errors on Win32 with new repo init
e9ca852e	2012-08-23T09:20:17	Fix warnings and merge issues on Win64
85bd1746	2012-08-22T16:03:35	Some cleanup suggested during review This cleans up a number of items suggested during code review with @vmg, including: * renaming "outside repo" config API to `git_config_open_default` * killing the `git_config_open_global` API * removing the `git_` prefix from the static functions in fileops * removing some unnecessary functionality from the "cp" command
b769e936	2012-08-01T14:49:47	Don't reference stack vars in cleanup callback If you use the clar cleanup callback function, you can't pass a reference pointer to a stack allocated variable because when the cleanup function runs, the stack won't exist anymore.
ca1b6e54	2012-07-31T17:02:54	Add template dir and set gid to repo init This extends git_repository_init_ext further with support for initializing the repository from an external template directory and with support for the "create shared" type flags that make a set GID repository directory. This also adds tests for much of the new functionality to the existing `repo/init.c` test suite. Also, this adds a bunch of new utility functions including a very general purpose `git_futils_mkdir` (with the ability to make paths and to chmod the paths post-creation) and a file tree copying function `git_futils_cp_r`. Also, this includes some new path functions that were useful to keep the code simple.
02a0d651	2012-07-12T16:31:59	Add git_buf_unescape and git__unescape to unescape all characters in a string (in-place)
465092ce	2012-07-12T11:56:50	Fix memory leak in test
b0fe1129	2012-07-10T15:13:30	Add path utilities to resolve relative paths This makes it easy to take a buffer containing a path with relative references (i.e. .. or . path segments) and resolve all of those into a clean path. This can be applied to URLs as well as file paths which can be useful. As part of this, I made the drive-letter detection apply on all platforms, not just windows. If you give a path that looks like "c:/..." on any platform, it seems like we might as well detect that as a rooted path. I suppose if you create a directory named "x:" on another platform and want to use that as the beginning of a relative path under the root directory of your repo, this could cause a problem, but then it seems like you're asking for trouble.
039fc406	2012-07-10T15:10:14	Add a couple of useful git_buf utilities * `git_buf_rfind` (with tests and tests for `git_buf_rfind_next`) * `git_buf_puts_escaped` and `git_buf_puts_escaped_regex` (with tests) to copy strings into a buffer while injecting an escape sequence (e.g. '\') in front of particular characters.
cdca82c7	2012-06-20T00:46:26	Plug a few leaks
e272efcb	2012-06-08T11:24:37	Tests: wrap 'getenv' and friends for Win32 tests.
3f035860	2012-06-07T22:43:03	misc: Fix warnings from PVS Studio trial
6654dbe3	2012-06-07T14:09:25	tests: fix assertion
dbab0459	2012-05-26T14:59:07	tests-clar/core: fix non-null warning gcc 4.7.0 apparently doesn't see that we won't call setenv with NULL as second argument.
29ef309e	2012-05-25T09:44:56	Make errors for system and global files consistent The error codes from failed lookups of system and global files on Windows were not consistent with the codes returned on other platforms. This makes the error detection patterns match and adds a unit test for the various errors.
2a99df69	2012-05-24T17:14:56	Fix bugs for status with spaces and reloaded attrs This fixes two bugs: * Issue #728 where git_status_file was not working for files that contain spaces. This was caused by reusing the "fnmatch" parsing code from ignore and attribute files to interpret the "pathspec" that constrained the files to apply the status to. In that code, unescaped whitespace was considered terminal to the pattern, so a file with internal whitespace was excluded from the matched files. The fix was to add a mode to that code that allows spaces and tabs inside patterns. This mode only comes into play when parsing in-memory strings. * The other issue was undetected, but it was in the recently added code to reload gitattributes / gitignores when they were changed on disk. That code was not clearing out the old values from the cached file content before reparsing which meant that newly added patterns would be read in, but deleted patterns would not be removed. The fix was to clear the vector of patterns in a cached file before reparsing the file.
9cde607c	2012-05-24T15:08:55	Clean up system file finding tests on Win32
9e35d7fd	2012-05-24T13:44:24	Fix bugs in UTF-8 <-> UTF-16 conversion The function to convert UTF-16 to UTF-8 was only allocating a buffer of wcslen(utf16str) bytes for the UTF-8 string, but that is not sufficient if you have multibyte characters, and so when those occured, the conversion was failing. This updates the conversion functions to use the Win APIs to calculate the correct buffer lengths. Also fixes a comparison in the unit tests that would fail if you did not have a particular environment variable set.
23059130	2012-05-24T12:45:20	Get user's home dir in UTF-16 clean manner On Windows, we are having problems with home directories that have non-ascii characters in them. This rewrites the relevant code to fetch environment variables as UTF-16 and then explicitly map then into UTF-8 for our internal usage.
904b67e6	2012-05-18T01:48:50	errors: Rename error codes
e172cf08	2012-05-18T01:21:06	errors: Rename the generic return codes
41a82592	2012-05-15T14:17:39	Ranged iterators and rewritten git_status_file The goal of this work is to rewrite git_status_file to use the same underlying code as git_status_foreach. This is done in 3 phases: 1. Extend iterators to allow ranged iteration with start and end prefixes for the range of file names to be covered. 2. Improve diff so that when there is a pathspec and there is a common non-wildcard prefix of the pathspec, it will use ranged iterators to minimize excess iteration. 3. Rewrite git_status_file to call git_status_foreach_ext with a pathspec that covers just the one file being checked. Since ranged iterators underlie the status & diff implementation, this is actually fairly efficient. The workdir iterator does end up loading the contents of all the directories down to the single file, which should ideally be avoided, but it is pretty good.
212eb09d	2012-05-13T23:12:51	Add a test to verify FILENAME_MAX Since we now rely on it (at least under Solaris), I figured we probably want to make sure it's accurate. The new test makes sure that creating a file with a name of length FILENAME_MAX+1 fails.
9abb5bca	2012-05-07T13:58:01	compat: make p_realpath Windows implementation be a bit more POSIX compliant and fail if the provided path does not lead to an existing entry
3fbcac89	2012-05-02T19:56:38	Remove old and unused error codes
c2b67043	2012-04-25T15:20:28	Rename git_khash_str to git_strmap, etc. This renamed `git_khash_str` to `git_strmap`, `git_hash_oid` to `git_oidmap`, and deletes `git_hashtable` from the tree, plus adds unit tests for `git_strmap`.
19fa2bc1	2012-04-17T15:12:50	Convert attrs and diffs to use string pools This converts the git attr related code (including ignores) and the git diff related code (and implicitly the status code) to use `git_pools` for storing strings. This reduces the number of small blocks allocated dramatically.
2bc8fa02	2012-04-17T10:14:24	Implement git_pool paged memory allocator This adds a `git_pool` object that can do simple paged memory allocation with free for the entire pool at once. Using this, you can replace many small allocations with large blocks that can then cheaply be doled out in small pieces. This is best used when you plan to free the small blocks all at once - for example, if they represent the parsed state from a file or data stream that are either all kept or all discarded. There are two real patterns of usage for `git_pools`: either for "string" allocation, where the item size is a single byte and you end up just packing the allocations in together, or for "fixed size" allocation where you are allocating a large object (e.g. a `git_oid`) and you generally just allocation single objects that can be tightly packed. Of course, you can use it for other things, but those two cases are the easiest.
1a6e8f8a	2012-04-13T10:42:00	Update clar and remove old helpers This updates to the latest clar which includes the helpers `cl_assert_equal_s` and `cl_assert_equal_i`. Convert the code over to use those and remove the old libgit2-only helpers.
0a20eee9	2012-04-11T03:43:30	Merge pull request #619 from nulltoken/topic/branches Basic branch management API
555aa453	2012-04-09T02:28:31	fileops: Make git_futils_mkdir_r() able to skip non-empty directories
17bd6de3	2012-04-04T13:59:58	Fix MSVC "unreferenced local variable" compilation warning.
a4c291ef	2012-03-20T21:57:38	Convert reflog to new errors Cleaned up some other issues.
7c7ff7d1	2012-03-19T16:10:11	Migrate index, oid, and utils to new errors This includes a few cleanups that came up while converting these files. This commit introduces a could new git error classes, including the catchall class: GITERR_INVALID which I'm using as the class for invalid and out of range values which are detected at too low a level of library to use a higher level classification. For example, an overflow error in parsing an integer or a bad letter in parsing an OID string would generate an error in this class.
0d0fa7c3	2012-03-16T15:56:01	Convert attr, ignore, mwindow, status to new errors Also cleaned up some previously converted code that still had little things to polish.
7b93079b	2012-03-16T15:16:52	Make git_path_root() cope with windows network paths Fix libgit2/libgit2sharp#125
e3c47510	2012-03-13T14:23:24	Resolve comments from pull request This converts the map validation function into a macro, tweaks the GITERR_OS system error automatic appending, and adds a tentative new error access API and some quick unit tests for both the old and new error APIs.
1a481123	2012-02-17T00:13:34	error-handling: References Yes, this is error handling solely for `refs.c`, but some of the abstractions leak all ofer the code base.
854eccbb	2012-02-29T12:04:59	Clean up GIT_UNUSED macros on all platforms It turns out that commit 31e9cfc4cbcaf1b38cdd3dbe3282a8f57e5366a5 did not fix the GIT_USUSED behavior on all platforms. This commit walks through and really cleans things up more thoroughly, getting rid of the unnecessary stuff. To remove the use of some GIT_UNUSED, I ended up adding a couple of new iterators for hashtables that allow you to iterator just over keys or just over values. In making this change, I found a bug in the clar tests (where we were doing count++ but meant to do (count)++ to increment the value). I fixed that but then found the test failing because it was not really using an empty repo. So, I took some of the code that I wrote for iterator testing and moved it to clar_helpers.c, then made use of that to make it easier to open fixtures on a per test basis even within a single test file.
2705576b	2012-01-24T14:06:42	Simplify GIT_UNUSED macros Since casting to void works to eliminate errors with unused parameters on all platforms, avoid the various special cases. Over time, it will make sense to eliminate the GIT_UNUSED macro completely and just have GIT_UNUSED_ARG.
13224ea4	2012-02-27T04:28:31	buffer: Unify `git_fbuffer` and `git_buf` This makes so much sense that I can't believe it hasn't been done before. Kill the old `git_fbuffer` and read files straight into `git_buf` objects. Also: In order to fully support 4GB files in 32-bit systems, the `git_buf` implementation has been changed from using `ssize_t` for storage and storing negative values on allocation failure, to using `size_t` and changing the buffer pointer to a magical pointer on allocation failure. Hopefully this won't break anything.
3fd1520c	2012-01-24T20:35:15	Rename the Clay test suite to Clar Clay is the name of a programming language on the makings, and we want to avoid confusions. Sorry for the huge diff!

238b7614

2013-08-16T13:31:24

Fix p_inet_pton on windows p_inet_pton on Windows should set errno properly for callers. Rewrite p_inet_pton to handle error cases correctly and add test cases to exercise this function.

d730d3f4

2013-07-31T16:40:42

Major rename detection changes After doing further profiling, I found that a lot of time was being spent attempting to insert hashes into the file hash signature when using the rolling hash because the rolling hash approach generates a hash per byte of the file instead of one per run/line of data. To optimize this, I decided to convert back to a run-based file signature algorithm which would be more like core Git. After changing this, a number of the existing tests started to fail. In some cases, this appears to have been because the test was coded to be too specific to the particular results of the file similarity metric and in some cases there appear to have been bugs in the core rename detection code where only by the coincidence of the file similarity scoring were the expected results being generated. This renames all the variables in the core rename detection code to be more consistent and hopefully easier to follow which made it a bit easier to reason about the behavior of that code and fix the problems that I was seeing. I think it's in better shape now. There are a couple of tests now that attempt to stress test the rename detection code and they are quite slow. Most of the time is spent setting up the test data on disk and in the index. When we roll out performance improvements for index insertion, it should also speed up these tests I hope.

6fc5a581

2013-07-08T22:42:02

Basic bit vector This is a simple bit vector object that is not resizable after the initial allocation but can be of arbitrary size. It will keep the bti vector entirely on the stack for vectors 64 bits or less, and will allocate the vector on the heap for larger sizes. The API is uniform regardless of storage location. This is very basic right now and all the APIs are inline functions, but it is useful for storing an array of boolean values.

290e1479

2013-07-09T16:17:41

Add GIT_CAP_SSH if library was built with SSH This also adds a test that actually calls git_libgit2_capabilities and git_libgit2_version.

e3b4a47c

2013-05-31T16:30:09

git__strcasesort_cmp: strcasecmp sorting rules but requires strict equality

2d160ef7

2013-05-29T16:03:30

allow (ignore) bare slash in gitignore

aa8f0101

2013-04-29T08:59:46

Add git_oid_strcmp and use it for git_oid_streq Add a new git_oid_strcmp that compares a string OID with a hex oid for sort order, and then reimplement git_oid_streq using it. This actually should speed up git_oid_streq because it only reads as far into the string as it needs to, whereas previously it would convert the whole string into an OID and then use git_oid_cmp.

8564a022

2013-04-29T08:51:24

Fix fragile git_oid_ncmp git_oid_ncmp was making some assumptions about the length of the data - this shifts the check to the top of the loop so it will work more robustly, limits the max, and adds some tests to verify the functionality.

917f60c5

2013-04-12T13:04:08

Add tests for oidmap and new cache with threading This adds some basic tests for the oidmap just to make sure that collisions, etc. are dealt with correctly. This also adds some tests for the new caching that check if items are inserted (or not inserted) properly into the cache, and that the cache can hold up in a multithreaded environment without error.

5df18424

2013-04-01T19:38:23

lol this worked first try wtf

0b061b5b

2013-03-26T11:05:57

Merge pull request #1436 from schu/opts-cache-size opts: allow configuration of odb cache size

3658e81e

2013-03-25T14:20:07

Move crlf conversion into buf_text This adds crlf/lf conversion functions into buf_text with more efficient implementations that bypass the high level buffer functions. They attempt to minimize the number of reallocations done and they directly write the buffer data as needed if they know that there is enough memory allocated to memcpy data. Tests are added for these new functions. The crlf.c code is updated to use the new functions. Removed the include of buf_text.h from filter.h and just include it more narrowly in the places that need it.

13640d1b

2013-03-25T21:39:11

oid: Do not parse OIDs longer than 40

f5e28202

2013-03-25T13:38:43

opts: allow configuration of odb cache size Currently, the odb cache has a fixed size of 128 slots as defined by GIT_DEFAULT_CACHE_SIZE. Allow users to set the size of the cache via git_libgit2_opts(). Fixes #1035.

b3c17483

2013-03-21T14:50:28

Clarified string value

7e527ca7

2013-03-21T12:16:31

Added test case for new function

32460251

2013-03-18T15:54:35

Fixes and cleanups Get rid of some dead code, tighten things up a bit, and fix a bug with core::env test.

41954a49

2013-03-18T14:19:35

Switch search paths to classic delimited strings This switches the APIs for setting and getting the global/system search paths from using git_strarray to using a simple string with GIT_PATH_LIST_SEPARATOR delimited paths, just as the environment PATH variable would contain. This makes it simpler to get and set the value. I also added code to expand "$PATH" when setting a new value to embed the old value of the path. This means that I no longer require separate actions to PREPEND to the value.

5540d947

2013-03-15T16:39:00

Implement global/system file search paths The goal of this work is to expose the search logic for "global", "system", and "xdg" files through the git_libgit2_opts() interface. Behind the scenes, I changed the logic for finding files to have a notion of a git_strarray that represents a search path and to store a separate search path for each of the three tiers of config file. For each tier, I implemented a function to initialize it to default values (generally based on environment variables), and then general interfaces to get it, set it, reset it, and prepend new directories to it. Next, I exposed these interfaces through the git_libgit2_opts interface, reusing the GIT_CONFIG_LEVEL_SYSTEM, etc., constants for the user to control which search path they were modifying. There are alternative designs for the opts interface / argument ordering, so I'm putting this phase out for discussion. Additionally, I ended up doing a little bit of clean up regarding attr.h and attr_file.h, adding a new attrcache.h so the other two files wouldn't have to be included in so many places.

0c468633

2013-03-14T13:40:15

Improved tree iterator internals This updates the tree iterator internals to be more efficient. The tree_iterator_entry objects are now kept as pointers that are allocated from a git_pool, so that we may use git__tsort_r for sorting (which is better than qsort, given that the tree is likely mostly ordered already). Those tree_iterator_entry objects now keep direct pointers to the data they refer to instead of keeping indirect index values. This simplifies a lot of the data structure traversal code. This also adds bsearch to find the start item position for range- limited tree iterators, and is more explicit about using git_path_cmp instead of reimplementing it. The git_path_cmp changed a bit to make it easier for tree_iterators to use it (but it was barely being used previously, so not a big deal). This adds a git_pool_free_array function that efficiently frees a list of pool allocated pointers (which the tree_iterator keeps). Also, added new tests for the git_pool free list functionality that was not previously being tested (or used).

9bc8be3d

2013-02-19T10:25:41

Refine pluggable similarity API This plugs in the three basic similarity strategies for handling whitespace via internal use of the pluggable API. In so doing, I realized that the use of git_buf in the hashsig API was not needed and actually just made it harder to use, so I tweaked that API as well. Note that the similarity metric is still not hooked up in the find_similarity code - this is just setting out the function that will be used.

aa643260

2013-02-15T11:08:02

More tests of file signatures with whitespace opts Seems to be working pretty well...

5e5848eb

2013-02-14T17:25:10

Change similarity metric to sampled hashes This moves the similarity metric code out of buf_text and into a new file. Also, this implements a different approach to similarity measurement based on a Rabin-Karp rolling hash where we only keep the top 100 and bottom 100 hashes. In theory, that should be sufficient samples to given a fairly accurate measurement while limiting the amount of data we keep for file signatures no matter how large the file is.

9c454b00

2013-01-11T22:13:02

Initial implementation of similarity scoring algo This adds a new `git_buf_text_hashsig` type and functions to generate these hash signatures and compare them to give a similarity score. This can be plugged into diff similarity scoring.

56543a60

2013-02-15T16:02:45

Clear up warnings from cppcheck The cppcheck static analyzer generates warnings for a bunch of places in the libgit2 code base. All the ones fixed in this commit are actually false positives, but I've reorganized the code to hopefully make it easier for static analysis tools to correctly understand the structure. I wouldn't do this if I felt like it was making the code harder to read or worse for humans, but in this case, these fixes don't seem too bad and will hopefully make it easier for better analysis tools to get at any real issues.

8c29dca6

2013-02-11T09:25:57

Fix some incorrect MSVC #ifdef's. Fixes #1305

17c92bea

2013-01-29T12:13:24

Test buf join with NULL behavior explicitly

0d52cb4a

2013-01-24T00:09:55

opts: Some basic tests

f63d0ee9

2013-01-17T15:47:10

Move all non-ascii test data to raw hex This takes all of the characters in core::env and makes them use hex sequences instead of keeping tricky character data inline in the test.

0d65acad

2013-01-11T11:24:26

Match binary file check of core git in diff Core git just looks for NUL bytes in files when deciding about is-binary inside diff (although it uses a better algorithm in checkout, when deciding if CRLF conversion should be done). Libgit2 was using the better algorithm in both places, but that is causing some confusion. For now, this makes diff just look for NUL bytes to decide if a file is binary by content in diff.

b8a1ea7c

2013-01-03T11:04:03

Fix core::env cleanup code Mark fake home directories that failed to be created, so we won't try to remove them and have cleanup just use p_rmdir.

600d8dbf

2013-01-03T09:10:38

Move test cleanup into cleanup functions

6fef1ab3

2013-01-03T07:47:51

Tests should clean up after themselves

50a762a5

2012-12-26T12:03:07

path: Teach UNC paths to git_path_dirname_r() Fix libgit2/libgit2sharp#256

34b6f05f

2012-12-26T11:59:07

path: enhance git_path_dirname_r() test coverage

7bf87ab6

2012-11-28T09:58:48

Consolidate text buffer functions There are many scattered functions that look into the contents of buffers to do various text manipulations (such as escaping or unescaping data, calculating text stats, guessing if content is binary, etc). This groups all those functions together into a new file and converts the code to use that. This has two enhancements to existing functionality. The old text stats function is significantly rewritten and the BOM detection code was extended (although largely we can't deal with anything other than a UTF8 BOM).

16248ee2

2012-11-21T11:03:07

Fix up some missing consts in tree & index This fixes some missed places where we can apply const-ness to various public APIs. There are still some index and tree APIs that cannot take const pointers because we sort our `git_vectors` lazily and so we can't reliably bsearch the index and tree content without applying a `git_vector_sort()` first. This also fixes some missed places where size_t can be used and where const can be applied to a couple internal functions.

9094d30b

2012-11-23T11:41:56

Reset all static variables to NULL in clar's __cleanup Without this change, any failed assertion in the second (or a later) test inside a test suite has a chance of double deleting memory, resulting in a heap corruption. See #1096 for details. This leaves alone the test cases where we "just" use cl_git_sandbox_init() and cl_git_sandbox_cleanup(). These methods already take good care to not double delete a repository. Fixes #1096

e566b609

2012-11-20T00:57:56

Update clar tests p_lstat_posixly and p_lstat

0e95e70a

2012-11-17T05:22:39

env: ensure git_futils_find_xxx() returns ENOTFOUND

cccacac5

2012-11-14T22:41:51

Add POSIX compat lstat() variant for win32 The existing p_lstat implementation on win32 is not quite POSIX compliant when setting errno to ENOTDIR. This adds an option to make is be compliant so that code (such as checkout) that cares to have separate behavior for ENOTDIR can use it portably. This also contains a couple of other minor cleanups in the posix_w32.c implementations to avoid unnecessary work.

331e7de9

2012-10-24T17:32:50

Extensions to rmdir and mkdir utilities * Rework GIT_DIRREMOVAL values to GIT_RMDIR flags, allowing combinations of flags * Add GIT_RMDIR_EMPTY_PARENTS flag to remove parent dirs that are left empty after removal * Add GIT_MKDIR_VERIFY_DIR to give an error if item is a file, not a dir (previously an EEXISTS error was ignored, even for files) and enable this flag for git_futils_mkpath2file call * Improve accuracy of error messages from git_futils_mkdir

f45ec1a0

2012-10-29T20:04:21

index refactoring

0d422ec9

2012-10-19T15:40:43

Fix env variable tests with new Win32 path rules The new Win32 global path search was not working with the environment variable tests. But when I fixed the test, the new codes use of getenv() was causing more failures (presumably because of caching on Windows ???). This fixes the global file lookup to always go directly to the Win32 API in a predictable way.

4c47a8bc

2012-10-17T14:14:51

Merge pull request #968 from arrbee/diff-support-typechange Support TYPECHANGE records in status and adjust checkout accordingly

18217e7e

2012-10-16T19:34:29

test: Don't be so picky with failed lookups Not found means not found, and the other way around.

2d3579be

2012-10-10T14:54:31

Add git_buf_put_base64 to buffer API

0d64bef9

2012-10-05T15:56:57

Add complex checkout test and then fix checkout This started as a complex new test for checkout going through the "typechanges" test repository, but that revealed numerous issues with checkout, including: * complete failure with submodules * failure to create blobs with exec bits * problems when replacing a tree with a blob because the tree "example/" sorts after the blob "example" so the delete was being processed after the single file blob was created This fixes most of those problems and includes a number of other minor changes that made it easier to do that, including improving the TYPECHANGE support in diff/status, etc.

1a628100

2012-09-21T15:04:39

Make giterr_set_str public There has been discussion for a while about making some set of the `giterr_set` type functions part of the public API for code that is implementing new backends to libgit2. This makes the `giterr_set_str()` and `giterr_set_oom()` functions public.

2eb4edf5

2012-08-24T10:48:48

Fix errors on Win32 with new repo init

e9ca852e

2012-08-23T09:20:17

Fix warnings and merge issues on Win64

85bd1746

2012-08-22T16:03:35

Some cleanup suggested during review This cleans up a number of items suggested during code review with @vmg, including: * renaming "outside repo" config API to `git_config_open_default` * killing the `git_config_open_global` API * removing the `git_` prefix from the static functions in fileops * removing some unnecessary functionality from the "cp" command

b769e936

2012-08-01T14:49:47

Don't reference stack vars in cleanup callback If you use the clar cleanup callback function, you can't pass a reference pointer to a stack allocated variable because when the cleanup function runs, the stack won't exist anymore.

ca1b6e54

2012-07-31T17:02:54

Add template dir and set gid to repo init This extends git_repository_init_ext further with support for initializing the repository from an external template directory and with support for the "create shared" type flags that make a set GID repository directory. This also adds tests for much of the new functionality to the existing `repo/init.c` test suite. Also, this adds a bunch of new utility functions including a very general purpose `git_futils_mkdir` (with the ability to make paths and to chmod the paths post-creation) and a file tree copying function `git_futils_cp_r`. Also, this includes some new path functions that were useful to keep the code simple.

02a0d651

2012-07-12T16:31:59

Add git_buf_unescape and git__unescape to unescape all characters in a string (in-place)

465092ce

2012-07-12T11:56:50

Fix memory leak in test

b0fe1129

2012-07-10T15:13:30

Add path utilities to resolve relative paths This makes it easy to take a buffer containing a path with relative references (i.e. .. or . path segments) and resolve all of those into a clean path. This can be applied to URLs as well as file paths which can be useful. As part of this, I made the drive-letter detection apply on all platforms, not just windows. If you give a path that looks like "c:/..." on any platform, it seems like we might as well detect that as a rooted path. I suppose if you create a directory named "x:" on another platform and want to use that as the beginning of a relative path under the root directory of your repo, this could cause a problem, but then it seems like you're asking for trouble.

039fc406

2012-07-10T15:10:14

Add a couple of useful git_buf utilities * `git_buf_rfind` (with tests and tests for `git_buf_rfind_next`) * `git_buf_puts_escaped` and `git_buf_puts_escaped_regex` (with tests) to copy strings into a buffer while injecting an escape sequence (e.g. '\') in front of particular characters.

cdca82c7

2012-06-20T00:46:26

Plug a few leaks

e272efcb

2012-06-08T11:24:37

Tests: wrap 'getenv' and friends for Win32 tests.

3f035860

2012-06-07T22:43:03

misc: Fix warnings from PVS Studio trial

6654dbe3

2012-06-07T14:09:25

tests: fix assertion

dbab0459

2012-05-26T14:59:07

tests-clar/core: fix non-null warning gcc 4.7.0 apparently doesn't see that we won't call setenv with NULL as second argument.

29ef309e

2012-05-25T09:44:56

Make errors for system and global files consistent The error codes from failed lookups of system and global files on Windows were not consistent with the codes returned on other platforms. This makes the error detection patterns match and adds a unit test for the various errors.

2a99df69

2012-05-24T17:14:56

Fix bugs for status with spaces and reloaded attrs This fixes two bugs: * Issue #728 where git_status_file was not working for files that contain spaces. This was caused by reusing the "fnmatch" parsing code from ignore and attribute files to interpret the "pathspec" that constrained the files to apply the status to. In that code, unescaped whitespace was considered terminal to the pattern, so a file with internal whitespace was excluded from the matched files. The fix was to add a mode to that code that allows spaces and tabs inside patterns. This mode only comes into play when parsing in-memory strings. * The other issue was undetected, but it was in the recently added code to reload gitattributes / gitignores when they were changed on disk. That code was not clearing out the old values from the cached file content before reparsing which meant that newly added patterns would be read in, but deleted patterns would not be removed. The fix was to clear the vector of patterns in a cached file before reparsing the file.

9cde607c

2012-05-24T15:08:55

Clean up system file finding tests on Win32

9e35d7fd

2012-05-24T13:44:24

Fix bugs in UTF-8 <-> UTF-16 conversion The function to convert UTF-16 to UTF-8 was only allocating a buffer of wcslen(utf16str) bytes for the UTF-8 string, but that is not sufficient if you have multibyte characters, and so when those occured, the conversion was failing. This updates the conversion functions to use the Win APIs to calculate the correct buffer lengths. Also fixes a comparison in the unit tests that would fail if you did not have a particular environment variable set.

23059130

2012-05-24T12:45:20

Get user's home dir in UTF-16 clean manner On Windows, we are having problems with home directories that have non-ascii characters in them. This rewrites the relevant code to fetch environment variables as UTF-16 and then explicitly map then into UTF-8 for our internal usage.

904b67e6

2012-05-18T01:48:50

errors: Rename error codes

e172cf08

2012-05-18T01:21:06

errors: Rename the generic return codes

41a82592

2012-05-15T14:17:39

Ranged iterators and rewritten git_status_file The goal of this work is to rewrite git_status_file to use the same underlying code as git_status_foreach. This is done in 3 phases: 1. Extend iterators to allow ranged iteration with start and end prefixes for the range of file names to be covered. 2. Improve diff so that when there is a pathspec and there is a common non-wildcard prefix of the pathspec, it will use ranged iterators to minimize excess iteration. 3. Rewrite git_status_file to call git_status_foreach_ext with a pathspec that covers just the one file being checked. Since ranged iterators underlie the status & diff implementation, this is actually fairly efficient. The workdir iterator does end up loading the contents of all the directories down to the single file, which should ideally be avoided, but it is pretty good.

212eb09d

2012-05-13T23:12:51

Add a test to verify FILENAME_MAX Since we now rely on it (at least under Solaris), I figured we probably want to make sure it's accurate. The new test makes sure that creating a file with a name of length FILENAME_MAX+1 fails.

9abb5bca

2012-05-07T13:58:01

compat: make p_realpath Windows implementation be a bit more POSIX compliant and fail if the provided path does not lead to an existing entry

3fbcac89

2012-05-02T19:56:38

Remove old and unused error codes

c2b67043

2012-04-25T15:20:28

Rename git_khash_str to git_strmap, etc. This renamed `git_khash_str` to `git_strmap`, `git_hash_oid` to `git_oidmap`, and deletes `git_hashtable` from the tree, plus adds unit tests for `git_strmap`.

19fa2bc1

2012-04-17T15:12:50

Convert attrs and diffs to use string pools This converts the git attr related code (including ignores) and the git diff related code (and implicitly the status code) to use `git_pools` for storing strings. This reduces the number of small blocks allocated dramatically.

2bc8fa02

2012-04-17T10:14:24

Implement git_pool paged memory allocator This adds a `git_pool` object that can do simple paged memory allocation with free for the entire pool at once. Using this, you can replace many small allocations with large blocks that can then cheaply be doled out in small pieces. This is best used when you plan to free the small blocks all at once - for example, if they represent the parsed state from a file or data stream that are either all kept or all discarded. There are two real patterns of usage for `git_pools`: either for "string" allocation, where the item size is a single byte and you end up just packing the allocations in together, or for "fixed size" allocation where you are allocating a large object (e.g. a `git_oid`) and you generally just allocation single objects that can be tightly packed. Of course, you can use it for other things, but those two cases are the easiest.

1a6e8f8a

2012-04-13T10:42:00

Update clar and remove old helpers This updates to the latest clar which includes the helpers `cl_assert_equal_s` and `cl_assert_equal_i`. Convert the code over to use those and remove the old libgit2-only helpers.

0a20eee9

2012-04-11T03:43:30

Merge pull request #619 from nulltoken/topic/branches Basic branch management API

555aa453

2012-04-09T02:28:31

fileops: Make git_futils_mkdir_r() able to skip non-empty directories

17bd6de3

2012-04-04T13:59:58

Fix MSVC "unreferenced local variable" compilation warning.

a4c291ef

2012-03-20T21:57:38

Convert reflog to new errors Cleaned up some other issues.

7c7ff7d1

2012-03-19T16:10:11

Migrate index, oid, and utils to new errors This includes a few cleanups that came up while converting these files. This commit introduces a could new git error classes, including the catchall class: GITERR_INVALID which I'm using as the class for invalid and out of range values which are detected at too low a level of library to use a higher level classification. For example, an overflow error in parsing an integer or a bad letter in parsing an OID string would generate an error in this class.

0d0fa7c3

2012-03-16T15:56:01

Convert attr, ignore, mwindow, status to new errors Also cleaned up some previously converted code that still had little things to polish.

7b93079b

2012-03-16T15:16:52

Make git_path_root() cope with windows network paths Fix libgit2/libgit2sharp#125

e3c47510

2012-03-13T14:23:24

Resolve comments from pull request This converts the map validation function into a macro, tweaks the GITERR_OS system error automatic appending, and adds a tentative new error access API and some quick unit tests for both the old and new error APIs.

1a481123

2012-02-17T00:13:34

error-handling: References Yes, this is error handling solely for `refs.c`, but some of the abstractions leak all ofer the code base.

854eccbb

2012-02-29T12:04:59

Clean up GIT_UNUSED macros on all platforms It turns out that commit 31e9cfc4cbcaf1b38cdd3dbe3282a8f57e5366a5 did not fix the GIT_USUSED behavior on all platforms. This commit walks through and really cleans things up more thoroughly, getting rid of the unnecessary stuff. To remove the use of some GIT_UNUSED, I ended up adding a couple of new iterators for hashtables that allow you to iterator just over keys or just over values. In making this change, I found a bug in the clar tests (where we were doing *count++ but meant to do (*count)++ to increment the value). I fixed that but then found the test failing because it was not really using an empty repo. So, I took some of the code that I wrote for iterator testing and moved it to clar_helpers.c, then made use of that to make it easier to open fixtures on a per test basis even within a single test file.

2705576b

2012-01-24T14:06:42

Simplify GIT_UNUSED macros Since casting to void works to eliminate errors with unused parameters on all platforms, avoid the various special cases. Over time, it will make sense to eliminate the GIT_UNUSED macro completely and just have GIT_UNUSED_ARG.

13224ea4

2012-02-27T04:28:31

buffer: Unify `git_fbuffer` and `git_buf` This makes so much sense that I can't believe it hasn't been done before. Kill the old `git_fbuffer` and read files straight into `git_buf` objects. Also: In order to fully support 4GB files in 32-bit systems, the `git_buf` implementation has been changed from using `ssize_t` for storage and storing negative values on allocation failure, to using `size_t` and changing the buffer pointer to a magical pointer on allocation failure. Hopefully this won't break anything.

3fd1520c

2012-01-24T20:35:15

Rename the Clay test suite to Clar Clay is the name of a programming language on the makings, and we want to avoid confusions. Sorry for the huge diff!

thodg/libgit2/tests-clar/core

tests-clar/core

Log