kmx git

Commit	Date	Message
56ac6c0a	2017-09-30T17:23:11	graph: document that a commit isn't a descendant of itself
2a3cfc23	2017-08-11T17:15:51	Docs: Fix inline comments for git_diff_hunk
a9d6b9d5	2017-07-31T01:20:21	Merge pull request #4304 from pks-t/pks/patch-buffers patch_generate: represent buffers as void pointers
dca8c44f	2017-07-31T01:17:24	Merge pull request #4323 from libgit2/ethomson/remove_sys_remote_h Remove unused 'sys/remote.h' header
fb585d01	2017-07-31T00:58:58	Merge branch '4233'
37841317	2017-07-31T00:38:28	Remove unused 'sys/remote.h' header
a94a5402	2017-07-19T13:28:32	Merge pull request #4272 from pks-t/pks/patch-id Patch ID calculation
9093ced6	2017-07-10T11:42:26	patch_generate: represent buffers as void pointers Pointers to general data should usually be used as a void pointer such that it is possible to hand in variables of a different pointer type without the need to cast. This is the same when creating patches from buffers, where the buffers may contain arbitrary data. Instead of requiring the caller to care whether his buffer is e.g. `char ` or `unsigned char `, we should instead just accept a `void *`. This is also consistent in how we tread other types like for example `git_blob`, which also just has a void pointer as its raw contents.
d4e03be6	2017-06-30T11:21:18	git_reset_*: pass parameters as const pointers
89a34828	2017-06-16T13:34:43	diff: implement function to calculate patch ID The upstream git project provides the ability to calculate a so-called patch ID. Quoting from git-patch-id(1): A "patch ID" is nothing but a sum of SHA-1 of the file diffs associated with a patch, with whitespace and line numbers ignored." Patch IDs can be used to identify two patches which are probably the same thing, e.g. when a patch has been cherry-picked to another branch. This commit implements a new function `git_diff_patchid`, which gets a patch and derives an OID from the diff. Note the different terminology here: a patch in libgit2 are the differences in a single file and a diff can contain multiple patches for different files. The implementation matches the upstream implementation and should derive the same OID for the same diff. In fact, some code has been directly derived from the upstream implementation. The upstream implementation has two different modes to calculate patch IDs, which is the stable and unstable mode. The old way of calculating the patch IDs was unstable in a sense that a different ordering the diffs was leading to different results. This oversight was fixed in git 1.9, but as git tries hard to never break existing workflows, the old and unstable way is still default. The newer and stable way does not care for ordering of the diff hunks, and in fact it is the mode that should probably be used today. So right now, we only implement the stable way of generating the patch ID.
a78441bc	2017-06-13T11:05:40	Adding git_filter_init for initializing `git_filter` struct + unit test
7f7dabda	2017-06-12T13:40:47	adding GIT_FILTER_VERSION to GIT_FILTER_INIT as part of convention
9d49a43c	2017-06-12T12:01:10	repository_item_path: return ENOTFOUND when appropriate Disambiguate error values: return `GIT_ENOTFOUND` when the item cannot exist in the repository (perhaps because the repository is inmemory or otherwise not backed by a filesystem), return `-1` when there is a hard failure.
2a3cc403	2017-06-11T12:23:34	Update version number to v0.26
6c23704d	2017-06-08T21:40:18	settings: rename `GIT_OPT_ENABLE_SYNCHRONOUS_OBJECT_CREATION` Initially, the setting has been solely used to enable the use of `fsync()` when creating objects. Since then, the use has been extended to also cover references and index files. As the option is not yet part of any release, we can still correct this by renaming the option to something more sensible, indicating not only correlation to objects. This commit renames the option to `GIT_OPT_ENABLE_FSYNC_GITDIR`. We also move the variable from the object to repository source code.
dd0aa811	2017-06-04T22:46:07	Merge branch 'pr/4228'
f0848dd7	2017-06-04T22:44:30	worktree: upgrade lock to an int
883eeb5f	2017-05-02T12:35:59	worktree: switch over worktree pruning to an opts structure The current signature of `git_worktree_prune` accepts a flags field to alter its behavior. This is not as flexible as we'd like it to be when we want to enable passing additional options in the future. As the function has not been part of any release yet, we are still free to alter its current signature. This commit does so by using our usual pattern of an options structure, which is easily extendable without breaking the API.
8264a30f	2017-05-02T10:11:28	worktree: support creating locked worktrees When creating a new worktree, we do have a potential race with us creating the worktree and another process trying to delete the same worktree as it is being created. As such, the upstream git project has introduced a flag `git worktree add --locked`, which will cause the newly created worktree to be locked immediately after its creation. This mitigates the race condition. We want to be able to mirror the same behavior. As such, a new flag `locked` is added to the options structure of `git_worktree_add` which allows the user to enable this behavior.
4bc16c37	2016-07-08T01:37:22	remote: add function to create detached remotes Right now it is only possible to create remotes from a repository. While this is probably the most common use-case, there are commands which make sense even without a repository, e.g. the equivalence of `git ls-remote`. Add a new function `git_remote_create_detached`, which simply accepts a URL.
a7aa73a5	2017-05-02T10:02:36	worktree: introduce git_worktree_add options The `git_worktree_add` function currently accepts only a path and name for the new work tree. As we may want to expand these parameters in future versions without adding additional parameters to the function for every option, this commit introduces our typical pattern of an options struct. Right now, this structure is still empty, which will change with the next commit.
13c1bf07	2017-05-01T16:17:48	Merge pull request #4197 from pks-t/pks/verify-object-hashes Verify object hashes
d8702843	2017-05-01T16:11:56	Merge pull request #4206 from libgit2/cmn/transport-get-proxy transport: provide a getter for the proxy options
45071cec	2017-05-01T15:23:27	git_remote_push: document that NULL refspecs allowed
35079f50	2017-04-21T07:31:56	odb: add option to turn off hash verification Verifying hashsums of objects we are reading from the ODB may be costly as we have to perform an additional hashsum calculation on the object. Especially when reading large objects, the penalty can be as high as 35%, as can be seen when executing the equivalent of `git cat-file` with and without verification enabled. To mitigate for this, we add a global option for libgit2 which enables the developer to turn off the verification, e.g. when he can be reasonably sure that the objects on disk won't be corrupted.
28a0741f	2017-04-10T09:30:08	odb: verify object hashes The upstream git.git project verifies objects when looking them up from disk. This avoids scenarios where objects have somehow become corrupt on disk, e.g. due to hardware failures or bit flips. While our mantra is usually to follow upstream behavior, we do not do so in this case, as we never check hashes of objects we have just read from disk. To fix this, we create a new error class `GIT_EMISMATCH` which denotes that we have looked up an object with a hashsum mismatch. `odb_read_1` will then, after having read the object from its backend, hash the object and compare the resulting hash to the expected hash. If hashes do not match, it will return an error. This obviously introduces another computation of checksums and could potentially impact performance. Note though that we usually perform I/O operations directly before doing this computation, and as such the actual overhead should be drowned out by I/O. Running our test suite seems to confirm this guess. On a Linux system with best-of-five timings, we had 21.592s with the check enabled and 21.590s with the ckeck disabled. Note though that our test suite mostly contains very small blobs only. It is expected that repositories with bigger blobs may notice an increased hit by this check. In addition to a new test, we also had to change the odb::backend::nonrefreshing test suite, which now triggers a hashsum mismatch when looking up the commit "deadbeef...". This is expected, as the fake backend allocated inside of the test will return an empty object for the OID "deadbeef...", which will obviously not hash back to "deadbeef..." again. We can simply adjust the hash to equal the hash of the empty object here to fix this test.
f4d1592c	2017-04-21T07:09:59	global: fix typo in `git_libgit2_init` description
8d89e409	2017-04-17T17:19:03	Merge pull request #4192 from libgit2/ethomson/win32_posix Refactor some of the win32 POSIX emulation
5c760960	2017-04-17T13:03:03	transport: provide a getter for the proxy options As with the callbacks, third-party implementations of smart subtransports cannot reach into the opaque struct and thus cannot know what options the user set. Add a getter for these options to copy the proxy options into something external implementors can use.
d5e6ca1e	2017-01-14T18:39:32	Allow to configure default file share mode for opening files This can prevent FILE_SHARED_VIOLATIONS when used in tools such as TortoiseGit TGitCache and FILE_SHARE_DELETE, because files can be opened w/o being locked any more. Signed-off-by: Sven Strickroth <email@cs-ware.de>
a12796dd	2017-04-02T23:05:48	Correct typos that reference a non-existing file There are references to odb_backends.h when the file is actually named odb_backend.h and in the sys folder.
cc8d9a29	2017-04-01T10:44:17	win32: introduce `do_with_retries` macro Provide a macro that will allow us to run a function with posix-like return values multiple times in a retry loop, with an optional cleanup function called between invocations.
f623cf89	2017-03-22T20:32:55	Merge pull request #4163 from pks-t/pks/submodules-with-worktrees Worktree fixes
6fd6c678	2017-03-22T20:29:22	Merge pull request #4030 from libgit2/ethomson/fsync fsync all the things
84b4e573	2017-03-22T06:08:24	Use proper documentation tags git_cred_acquire_cb isn't using the standard @param and @return tags. This is causing the generated documentation to not be formatted properly.
12b7394c	2017-03-20T22:30:37	Fix typo in remote.h API
3017ba94	2017-03-15T14:24:25	worktree: implement `git_worktree_open_from_repository` While we already provide functionality to look up a worktree from a repository, we cannot do so the other way round. That is given a repository, we want to look up its worktree if it actually exists. Getting the worktree of a repository is useful when we want to get certain meta information like the parent's location, getting the locked status, etc.
bb342159	2017-03-15T11:46:15	merge_driver: fix const-correctness for source getters
2dfd1294	2017-02-24T13:34:01	hash: include sha1collisiondetection Include the SHA1 collision attack detection library from https://github.com/cr-marcstevens/sha1collisiondetection
2a5ad7d0	2017-02-17T16:42:40	fsync: call it "synchronous" object writing Rename `GIT_OPT_ENABLE_SYNCHRONIZED_OBJECT_CREATION` -> `GIT_OPT_ENABLE_SYNCHRONOUS_OBJECT_CREATION`.
6d3ad7e0	2016-12-13T10:58:43	Add `ENABLE_SYNCHRONIZED_OBJECT_CREATION` option Allow users to enable `SYNCHRONIZED_OBJECT_CREATION` with a setting.
fc27fe21	2016-12-13T10:35:05	odb_loose: actually honor the fsync option We've had an fsync option for a long time, but it was "ignored". Stop ignoring it.
19874e29	2017-02-16T08:40:49	Minor comment fix
a59545de	2017-02-13T14:38:12	Merge pull request #4122 from pks-t/pks/signature-dbl-free Signature cleanups
dc851d9e	2017-02-13T13:42:16	commit: clear user-provided buffers The functions `git_commit_header_field` and `git_commit_extract_signature` both receive buffers used to hand back the results to the user. While these functions called `git_buf_sanitize` on these buffers, this is not the right thing to do, as it will simply initialize or zero-terminate passed buffers. As we want to overwrite contents, we instead have to call `git_buf_clear` to completely reset them.
c576d4ff	2017-02-13T12:46:00	Merge pull request #4115 from gsaralms/users/gsaral/optionalOfsDelta Changes to provide option to turn off/on ofs_delta
1ba242c9	2017-02-03T13:52:23	worktree: extract git_worktree_is_prunable
e3acd37b	2015-11-06T12:08:15	branch: implement `git_branch_is_checked_out` Implement a new function that is able to determine if a branch is checked out in any repository connected to the current repository. In particular, this is required to check if for a given repository and branch, there exists any working tree connected to that repository that is referencing this branch.
04fb12ab	2015-10-27T12:37:51	worktree: implement functions reading HEAD Implement `git_repository_head_for_worktree` and `git_repository_head_detached_for_worktree` for directly accessing a worktree's HEAD without opening it as a `git_repository` first.
f0cfc341	2015-10-21T13:53:18	worktree: implement `git_worktree_prune` Implement the `git_worktree_prune` function. This function can be used to delete working trees from a repository. According to the flags passed to it, it can either delete the working tree's gitdir only or both gitdir and the working directory.
2a503485	2015-10-21T16:03:04	worktree: implement locking mechanisms Working trees support locking by creating a file `locked` inside the tree's gitdir with an optional reason inside. Support this feature by adding functions to get and set the locking status.
dea7488e	2015-10-23T14:11:44	worktree: implement `git_worktree_add` Implement the `git_worktree_add` function which can be used to create new working trees for a given repository.
372dc9ff	2015-10-21T13:49:55	worktree: implement `git_worktree_validate` Add a new function that checks wether a given `struct git_worktree` is valid. The validation includes checking if the gitdir, parent directory and common directory are present.
8c8d726e	2015-10-21T12:10:30	worktree: implement `git_repository_open_from_worktree` Add function `git_repository_open_from_worktree`, which allows to open a `git_worktree` as repository.
d3bc09e8	2015-10-21T12:02:31	worktree: introduce `struct git_worktree` Introduce a new `struct git_worktree`, which holds information about a possible working tree connected to a repository. Introduce functions to allow opening working trees for a repository.
45f2b7a4	2015-10-21T11:48:02	worktree: implement `git_worktree_list` Add new module for working trees with the `git_worktree_list` function. The function lists names for all working trees of a certain repository.
79ab3ef6	2015-10-15T15:58:05	repository: introduce is_worktree variable
cb3269c9	2016-11-11T13:46:59	repository: add function to retrieve paths for repo items
c09fd54e	2015-09-16T12:10:11	repository: introduce commondir variable The commondir variable stores the path to the common directory. The common directory is used to store objects and references shared across multiple repositories. A current use case is the newly introduced `git worktree` feature, which sets up a separate working copy, where the backing git object store and references are pointed to by the common directory.
61acc9fa	2017-02-08T16:22:44	Changes to provide option to turn off/on ofs_delta This change provides an option in git_libgit2_opt_t which can be used in git_libgit2_opts to turn off/on ofs_delta capability in libGit2
93e2c744	2017-02-09T19:12:31	Flag optional parameters for apply and pop The options parameter in both git_stash_apply and git_stash_pop can be NULL. They should be flagged as such in the documentation.
3a133652	2017-02-05T07:12:32	Flag checkout_opts in git_reset as optional The check_outs argument can be NULL and should be flagged accordingly in the header file.
21d4a378	2017-02-04T17:24:31	Flag given_opts in git_revert as optional The given_opts argument can actually be NULL and thus should be flagged accordingly in the header file.
921493cc	2017-01-27T14:37:16	Update docs for git_oid_fromstrn and p
7414acf5	2017-01-23T12:28:02	parameter 'id' not found in the function declaration
8d3b39a6	2017-01-21T23:50:38	Merge branch 'pr/3912'
28d0ba0b	2017-01-21T23:45:23	symbolic ref target validation: fixups Fixups requested in #3912.
44e8af8f	2017-01-21T22:51:50	Merge pull request #3892 from mitesch/shared_buffer Use a shared buffer in calls of git_treebuilder_write to avoid heap contention
9e78b727	2017-01-21T22:39:59	Merge branch 'master' into pr/3938
4d99c4cf	2016-11-23T18:32:48	Allow for caching of submodules. Added `git_repository_submodule_cache_all` to initialze a cache of submodules on the repository so that operations looking up N submodules are O(N) and not O(N^2). Added a `git_repository_submodule_cache_clear` function to remove the cache. Also optimized the function that loads all submodules as it was itself O(N^2) w.r.t the number of submodules, having to loop through the `.gitmodules` file once per submodule. I changed it to process the `.gitmodules` file once, into a map. Signed-off-by: David Turner <dturner@twosigma.com>
a5cf255b	2017-01-06T17:15:53	Bump version to 0.25.1
19ed4d0c	2017-01-01T22:19:23	merge: set default rename threshold When `GIT_MERGE_FIND_RENAMES` is set, provide a default for `rename_threshold` when it is unset.
75db289a	2016-12-20T19:14:20	Merge pull request #3980 from tiennou/doc-fixes Documentation fixes
77e46232	2016-12-17T14:31:36	settings: clarify what each value means Most importantly, clarify what it means for HTTPS and SSH to be supported.
87aaefe2	2016-08-09T12:23:19	write_tree: use shared buffer for writing trees The function to write trees allocates a new buffer for each tree. This causes problems with performance when performing a lot of actions involving writing trees, e.g. when doing many merges. Fix the issue by instead handing in a shared buffer, which is then re-used across the calls without having to re-allocate between calls.
72cee168	2016-12-02T16:14:47	remote: fix typo in git_fetch_init_options docs
5569778a	2016-11-15T11:15:40	Bump version number to v0.25
8d400c09	2016-11-01T17:49:07	transaction: fix documentation
788fcdb8	2016-11-01T17:46:57	remote: fix documentation and indent
2adac910	2016-11-01T17:46:37	remote: unused function typedef
8d2784d5	2016-11-01T17:46:20	describe: fix documentation
6502398f	2016-11-01T16:55:16	proxy: fix typo in documentation
6d8ecf08	2016-10-16T00:43:27	patch: minor documentation fix. Fix @return description of git_patch_num_lines_in_hunk.
3e22bb71	2016-09-28T14:45:18	Update submodule update opts init as per code review Update the `GIT_SUBMODULE_UPDATE_OPTIONS_INIT` definition with the correct values after removing `clone_checkout_strategy` in `git_submodule_update_options`.
567fd782	2016-09-26T19:32:15	Remove `clone_checkout_strategy` in submodule update opts Remove `clone_checkout_strategy` in `git_submodule_update_options` as per issue #3784.
93392cdd	2016-10-09T11:27:56	docs: GIT_OPT_ENABLE_STRICT_OBJECT_CREATION is enabled We changed the defaults on strict object creation - it is enabled by default. Update the documentation to reflect that.
82d4c0e6	2016-10-05T12:55:53	revwalk: update the description for the default sorting It changed from implementation-defined to git's default sorting, as there are systems (e.g. rebase) which depend on this order. Also specify more explicitly how you can get git's "date-order".
2749ff46	2016-09-13T15:52:43	time: Export `git_time_monotonic`
adedac5a	2016-09-02T02:03:45	diff: treat binary patches with no data special When creating and printing diffs, deal with binary deltas that have binary data specially, versus diffs that have a binary file but lack the actual binary data.
452bf57c	2016-08-27T13:42:53	Make symbolic ref target validation optional Introduce GIT_OPT_ENABLE_SYMBOLIC_REF_TARGET_VALIDATION option. Setting this option to 0 allows validation of a symbolic ref's target to be bypassed. This option is enabled by default. This mechanism is added primarily to address a discrepancy between git behaviour and libgit2 behaviour, whereby the former allows the symbolic ref target to carry an arbitrary string and the latter does not, so: $ git symbolic-ref refs/heads/foo bar $ cat .git/refs/heads/foo ref: bar where as attempting the same via libgit2 raises an error: The given reference name 'bar' is not valid this mechanism also allows those that might want to make use of git's more lenient treatment of symbolic ref targets to do so.
5625d86b	2016-05-17T15:40:32	index: support index v4 Support reading and writing index v4. Index v4 uses a very simple compression scheme for pathnames, but is otherwise similar to index v3. Signed-off-by: David Turner <dturner@twitter.com>
e2e7f31a	2016-08-05T20:00:22	diff: document `git_diff_from_buffer`
8f09a98e	2016-07-14T16:23:24	odb: freshen existing objects when writing When writing an object, we calculate its OID and see if it exists in the object database. If it does, we need to freshen the file that contains it.
002c8e29	2016-08-03T17:09:41	git_diff_file: move `id_abbrev` Move `id_abbrev` to a more reasonable place where it packs more nicely (before anybody starts using it).
60e15ecd	2016-07-15T17:18:39	packbuilder: `size_t` all the things After 1cd65991, we were passing a pointer to an `unsigned long` to a function that now expected a pointer to a `size_t`. These types differ on 64-bit Windows, which means that we trash the stack. Use `size_t`s in the packbuilder to avoid this.
f1dba144	2016-07-05T09:41:51	Add get user agent functionality.
ebeb56f0	2016-07-01T18:45:10	Merge pull request #3711 from joshtriplett/git_repository_discover_default Add GIT_REPOSITORY_OPEN_FROM_ENV flag to respect $GIT_* environment vars
de43efcf	2016-06-28T16:07:25	submodule: Try to fetch when update fails to find the target commit in the submodule.
20302aa4	2016-06-25T23:33:05	Merge pull request #3223 from ethomson/apply Reading patch files
0dd98b69	2016-04-03T17:22:07	Add GIT_REPOSITORY_OPEN_FROM_ENV flag to respect $GIT_* environment vars git_repository_open_ext provides parameters for the start path, whether to search across filesystems, and what ceiling directories to stop at. git commands have standard environment variables and defaults for each of those, as well as various other parameters of the repository. To avoid duplicate environment variable handling in users of libgit2, add a GIT_REPOSITORY_OPEN_FROM_ENV flag, which makes git_repository_open_ext automatically handle the appropriate environment variables. Commands that intend to act just like those built into git itself can use this flag to get the expected default behavior. git_repository_open_ext with the GIT_REPOSITORY_OPEN_FROM_ENV flag respects $GIT_DIR, $GIT_DISCOVERY_ACROSS_FILESYSTEM, $GIT_CEILING_DIRECTORIES, $GIT_INDEX_FILE, $GIT_NAMESPACE, $GIT_OBJECT_DIRECTORY, and $GIT_ALTERNATE_OBJECT_DIRECTORIES. In the future, when libgit2 gets worktree support, git_repository_open_env will also respect $GIT_WORK_TREE and $GIT_COMMON_DIR; until then, git_repository_open_ext with this flag will error out if either $GIT_WORK_TREE or $GIT_COMMON_DIR is set.

56ac6c0a

2017-09-30T17:23:11

graph: document that a commit isn't a descendant of itself

2a3cfc23

2017-08-11T17:15:51

Docs: Fix inline comments for git_diff_hunk

a9d6b9d5

2017-07-31T01:20:21

Merge pull request #4304 from pks-t/pks/patch-buffers patch_generate: represent buffers as void pointers

dca8c44f

2017-07-31T01:17:24

Merge pull request #4323 from libgit2/ethomson/remove_sys_remote_h Remove unused 'sys/remote.h' header

fb585d01

2017-07-31T00:58:58

Merge branch '4233'

37841317

2017-07-31T00:38:28

Remove unused 'sys/remote.h' header

a94a5402

2017-07-19T13:28:32

Merge pull request #4272 from pks-t/pks/patch-id Patch ID calculation

9093ced6

2017-07-10T11:42:26

patch_generate: represent buffers as void pointers Pointers to general data should usually be used as a void pointer such that it is possible to hand in variables of a different pointer type without the need to cast. This is the same when creating patches from buffers, where the buffers may contain arbitrary data. Instead of requiring the caller to care whether his buffer is e.g. `char *` or `unsigned char *`, we should instead just accept a `void *`. This is also consistent in how we tread other types like for example `git_blob`, which also just has a void pointer as its raw contents.

d4e03be6

2017-06-30T11:21:18

git_reset_*: pass parameters as const pointers

89a34828

2017-06-16T13:34:43

diff: implement function to calculate patch ID The upstream git project provides the ability to calculate a so-called patch ID. Quoting from git-patch-id(1): A "patch ID" is nothing but a sum of SHA-1 of the file diffs associated with a patch, with whitespace and line numbers ignored." Patch IDs can be used to identify two patches which are probably the same thing, e.g. when a patch has been cherry-picked to another branch. This commit implements a new function `git_diff_patchid`, which gets a patch and derives an OID from the diff. Note the different terminology here: a patch in libgit2 are the differences in a single file and a diff can contain multiple patches for different files. The implementation matches the upstream implementation and should derive the same OID for the same diff. In fact, some code has been directly derived from the upstream implementation. The upstream implementation has two different modes to calculate patch IDs, which is the stable and unstable mode. The old way of calculating the patch IDs was unstable in a sense that a different ordering the diffs was leading to different results. This oversight was fixed in git 1.9, but as git tries hard to never break existing workflows, the old and unstable way is still default. The newer and stable way does not care for ordering of the diff hunks, and in fact it is the mode that should probably be used today. So right now, we only implement the stable way of generating the patch ID.

a78441bc

2017-06-13T11:05:40

Adding git_filter_init for initializing `git_filter` struct + unit test

7f7dabda

2017-06-12T13:40:47

adding GIT_FILTER_VERSION to GIT_FILTER_INIT as part of convention

9d49a43c

2017-06-12T12:01:10

repository_item_path: return ENOTFOUND when appropriate Disambiguate error values: return `GIT_ENOTFOUND` when the item cannot exist in the repository (perhaps because the repository is inmemory or otherwise not backed by a filesystem), return `-1` when there is a hard failure.

2a3cc403

2017-06-11T12:23:34

Update version number to v0.26

6c23704d

2017-06-08T21:40:18

settings: rename `GIT_OPT_ENABLE_SYNCHRONOUS_OBJECT_CREATION` Initially, the setting has been solely used to enable the use of `fsync()` when creating objects. Since then, the use has been extended to also cover references and index files. As the option is not yet part of any release, we can still correct this by renaming the option to something more sensible, indicating not only correlation to objects. This commit renames the option to `GIT_OPT_ENABLE_FSYNC_GITDIR`. We also move the variable from the object to repository source code.

dd0aa811

2017-06-04T22:46:07

Merge branch 'pr/4228'

f0848dd7

2017-06-04T22:44:30

worktree: upgrade lock to an int

883eeb5f

2017-05-02T12:35:59

worktree: switch over worktree pruning to an opts structure The current signature of `git_worktree_prune` accepts a flags field to alter its behavior. This is not as flexible as we'd like it to be when we want to enable passing additional options in the future. As the function has not been part of any release yet, we are still free to alter its current signature. This commit does so by using our usual pattern of an options structure, which is easily extendable without breaking the API.

8264a30f

2017-05-02T10:11:28

worktree: support creating locked worktrees When creating a new worktree, we do have a potential race with us creating the worktree and another process trying to delete the same worktree as it is being created. As such, the upstream git project has introduced a flag `git worktree add --locked`, which will cause the newly created worktree to be locked immediately after its creation. This mitigates the race condition. We want to be able to mirror the same behavior. As such, a new flag `locked` is added to the options structure of `git_worktree_add` which allows the user to enable this behavior.

4bc16c37

2016-07-08T01:37:22

remote: add function to create detached remotes Right now it is only possible to create remotes from a repository. While this is probably the most common use-case, there are commands which make sense even without a repository, e.g. the equivalence of `git ls-remote`. Add a new function `git_remote_create_detached`, which simply accepts a URL.

a7aa73a5

2017-05-02T10:02:36

worktree: introduce git_worktree_add options The `git_worktree_add` function currently accepts only a path and name for the new work tree. As we may want to expand these parameters in future versions without adding additional parameters to the function for every option, this commit introduces our typical pattern of an options struct. Right now, this structure is still empty, which will change with the next commit.

13c1bf07

2017-05-01T16:17:48

Merge pull request #4197 from pks-t/pks/verify-object-hashes Verify object hashes

d8702843

2017-05-01T16:11:56

Merge pull request #4206 from libgit2/cmn/transport-get-proxy transport: provide a getter for the proxy options

45071cec

2017-05-01T15:23:27

git_remote_push: document that NULL refspecs allowed

35079f50

2017-04-21T07:31:56

odb: add option to turn off hash verification Verifying hashsums of objects we are reading from the ODB may be costly as we have to perform an additional hashsum calculation on the object. Especially when reading large objects, the penalty can be as high as 35%, as can be seen when executing the equivalent of `git cat-file` with and without verification enabled. To mitigate for this, we add a global option for libgit2 which enables the developer to turn off the verification, e.g. when he can be reasonably sure that the objects on disk won't be corrupted.

28a0741f

2017-04-10T09:30:08

odb: verify object hashes The upstream git.git project verifies objects when looking them up from disk. This avoids scenarios where objects have somehow become corrupt on disk, e.g. due to hardware failures or bit flips. While our mantra is usually to follow upstream behavior, we do not do so in this case, as we never check hashes of objects we have just read from disk. To fix this, we create a new error class `GIT_EMISMATCH` which denotes that we have looked up an object with a hashsum mismatch. `odb_read_1` will then, after having read the object from its backend, hash the object and compare the resulting hash to the expected hash. If hashes do not match, it will return an error. This obviously introduces another computation of checksums and could potentially impact performance. Note though that we usually perform I/O operations directly before doing this computation, and as such the actual overhead should be drowned out by I/O. Running our test suite seems to confirm this guess. On a Linux system with best-of-five timings, we had 21.592s with the check enabled and 21.590s with the ckeck disabled. Note though that our test suite mostly contains very small blobs only. It is expected that repositories with bigger blobs may notice an increased hit by this check. In addition to a new test, we also had to change the odb::backend::nonrefreshing test suite, which now triggers a hashsum mismatch when looking up the commit "deadbeef...". This is expected, as the fake backend allocated inside of the test will return an empty object for the OID "deadbeef...", which will obviously not hash back to "deadbeef..." again. We can simply adjust the hash to equal the hash of the empty object here to fix this test.

f4d1592c

2017-04-21T07:09:59

global: fix typo in `git_libgit2_init` description

8d89e409

2017-04-17T17:19:03

Merge pull request #4192 from libgit2/ethomson/win32_posix Refactor some of the win32 POSIX emulation

5c760960

2017-04-17T13:03:03

transport: provide a getter for the proxy options As with the callbacks, third-party implementations of smart subtransports cannot reach into the opaque struct and thus cannot know what options the user set. Add a getter for these options to copy the proxy options into something external implementors can use.

d5e6ca1e

2017-01-14T18:39:32

Allow to configure default file share mode for opening files This can prevent FILE_SHARED_VIOLATIONS when used in tools such as TortoiseGit TGitCache and FILE_SHARE_DELETE, because files can be opened w/o being locked any more. Signed-off-by: Sven Strickroth <email@cs-ware.de>

a12796dd

2017-04-02T23:05:48

Correct typos that reference a non-existing file There are references to odb_backends.h when the file is actually named odb_backend.h and in the sys folder.

cc8d9a29

2017-04-01T10:44:17

win32: introduce `do_with_retries` macro Provide a macro that will allow us to run a function with posix-like return values multiple times in a retry loop, with an optional cleanup function called between invocations.

f623cf89

2017-03-22T20:32:55

Merge pull request #4163 from pks-t/pks/submodules-with-worktrees Worktree fixes

6fd6c678

2017-03-22T20:29:22

Merge pull request #4030 from libgit2/ethomson/fsync fsync all the things

84b4e573

2017-03-22T06:08:24

Use proper documentation tags git_cred_acquire_cb isn't using the standard @param and @return tags. This is causing the generated documentation to not be formatted properly.

12b7394c

2017-03-20T22:30:37

Fix typo in remote.h API

3017ba94

2017-03-15T14:24:25

worktree: implement `git_worktree_open_from_repository` While we already provide functionality to look up a worktree from a repository, we cannot do so the other way round. That is given a repository, we want to look up its worktree if it actually exists. Getting the worktree of a repository is useful when we want to get certain meta information like the parent's location, getting the locked status, etc.

bb342159

2017-03-15T11:46:15

merge_driver: fix const-correctness for source getters

2dfd1294

2017-02-24T13:34:01

hash: include sha1collisiondetection Include the SHA1 collision attack detection library from https://github.com/cr-marcstevens/sha1collisiondetection

2a5ad7d0

2017-02-17T16:42:40

fsync: call it "synchronous" object writing Rename `GIT_OPT_ENABLE_SYNCHRONIZED_OBJECT_CREATION` -> `GIT_OPT_ENABLE_SYNCHRONOUS_OBJECT_CREATION`.

6d3ad7e0

2016-12-13T10:58:43

Add `ENABLE_SYNCHRONIZED_OBJECT_CREATION` option Allow users to enable `SYNCHRONIZED_OBJECT_CREATION` with a setting.

fc27fe21

2016-12-13T10:35:05

odb_loose: actually honor the fsync option We've had an fsync option for a long time, but it was "ignored". Stop ignoring it.

19874e29

2017-02-16T08:40:49

Minor comment fix

a59545de

2017-02-13T14:38:12

Merge pull request #4122 from pks-t/pks/signature-dbl-free Signature cleanups

dc851d9e

2017-02-13T13:42:16

commit: clear user-provided buffers The functions `git_commit_header_field` and `git_commit_extract_signature` both receive buffers used to hand back the results to the user. While these functions called `git_buf_sanitize` on these buffers, this is not the right thing to do, as it will simply initialize or zero-terminate passed buffers. As we want to overwrite contents, we instead have to call `git_buf_clear` to completely reset them.

c576d4ff

2017-02-13T12:46:00

Merge pull request #4115 from gsaralms/users/gsaral/optionalOfsDelta Changes to provide option to turn off/on ofs_delta

1ba242c9

2017-02-03T13:52:23

worktree: extract git_worktree_is_prunable

e3acd37b

2015-11-06T12:08:15

branch: implement `git_branch_is_checked_out` Implement a new function that is able to determine if a branch is checked out in any repository connected to the current repository. In particular, this is required to check if for a given repository and branch, there exists any working tree connected to that repository that is referencing this branch.

04fb12ab

2015-10-27T12:37:51

worktree: implement functions reading HEAD Implement `git_repository_head_for_worktree` and `git_repository_head_detached_for_worktree` for directly accessing a worktree's HEAD without opening it as a `git_repository` first.

f0cfc341

2015-10-21T13:53:18

worktree: implement `git_worktree_prune` Implement the `git_worktree_prune` function. This function can be used to delete working trees from a repository. According to the flags passed to it, it can either delete the working tree's gitdir only or both gitdir and the working directory.

2a503485

2015-10-21T16:03:04

worktree: implement locking mechanisms Working trees support locking by creating a file `locked` inside the tree's gitdir with an optional reason inside. Support this feature by adding functions to get and set the locking status.

dea7488e

2015-10-23T14:11:44

worktree: implement `git_worktree_add` Implement the `git_worktree_add` function which can be used to create new working trees for a given repository.

372dc9ff

2015-10-21T13:49:55

worktree: implement `git_worktree_validate` Add a new function that checks wether a given `struct git_worktree` is valid. The validation includes checking if the gitdir, parent directory and common directory are present.

8c8d726e

2015-10-21T12:10:30

worktree: implement `git_repository_open_from_worktree` Add function `git_repository_open_from_worktree`, which allows to open a `git_worktree` as repository.

d3bc09e8

2015-10-21T12:02:31

worktree: introduce `struct git_worktree` Introduce a new `struct git_worktree`, which holds information about a possible working tree connected to a repository. Introduce functions to allow opening working trees for a repository.

45f2b7a4

2015-10-21T11:48:02

worktree: implement `git_worktree_list` Add new module for working trees with the `git_worktree_list` function. The function lists names for all working trees of a certain repository.

79ab3ef6

2015-10-15T15:58:05

repository: introduce is_worktree variable

cb3269c9

2016-11-11T13:46:59

repository: add function to retrieve paths for repo items

c09fd54e

2015-09-16T12:10:11

repository: introduce commondir variable The commondir variable stores the path to the common directory. The common directory is used to store objects and references shared across multiple repositories. A current use case is the newly introduced `git worktree` feature, which sets up a separate working copy, where the backing git object store and references are pointed to by the common directory.

61acc9fa

2017-02-08T16:22:44

Changes to provide option to turn off/on ofs_delta This change provides an option in git_libgit2_opt_t which can be used in git_libgit2_opts to turn off/on ofs_delta capability in libGit2

93e2c744

2017-02-09T19:12:31

Flag optional parameters for apply and pop The options parameter in both git_stash_apply and git_stash_pop can be NULL. They should be flagged as such in the documentation.

3a133652

2017-02-05T07:12:32

Flag checkout_opts in git_reset as optional The check_outs argument can be NULL and should be flagged accordingly in the header file.

21d4a378

2017-02-04T17:24:31

Flag given_opts in git_revert as optional The given_opts argument can actually be NULL and thus should be flagged accordingly in the header file.

921493cc

2017-01-27T14:37:16

Update docs for git_oid_fromstrn and p

7414acf5

2017-01-23T12:28:02

parameter 'id' not found in the function declaration

8d3b39a6

2017-01-21T23:50:38

Merge branch 'pr/3912'

28d0ba0b

2017-01-21T23:45:23

symbolic ref target validation: fixups Fixups requested in #3912.

44e8af8f

2017-01-21T22:51:50

Merge pull request #3892 from mitesch/shared_buffer Use a shared buffer in calls of git_treebuilder_write to avoid heap contention

9e78b727

2017-01-21T22:39:59

Merge branch 'master' into pr/3938

4d99c4cf

2016-11-23T18:32:48

Allow for caching of submodules. Added `git_repository_submodule_cache_all` to initialze a cache of submodules on the repository so that operations looking up N submodules are O(N) and not O(N^2). Added a `git_repository_submodule_cache_clear` function to remove the cache. Also optimized the function that loads all submodules as it was itself O(N^2) w.r.t the number of submodules, having to loop through the `.gitmodules` file once per submodule. I changed it to process the `.gitmodules` file once, into a map. Signed-off-by: David Turner <dturner@twosigma.com>

a5cf255b

2017-01-06T17:15:53

Bump version to 0.25.1

19ed4d0c

2017-01-01T22:19:23

merge: set default rename threshold When `GIT_MERGE_FIND_RENAMES` is set, provide a default for `rename_threshold` when it is unset.

75db289a

2016-12-20T19:14:20

Merge pull request #3980 from tiennou/doc-fixes Documentation fixes

77e46232

2016-12-17T14:31:36

settings: clarify what each value means Most importantly, clarify what it means for HTTPS and SSH to be supported.

87aaefe2

2016-08-09T12:23:19

write_tree: use shared buffer for writing trees The function to write trees allocates a new buffer for each tree. This causes problems with performance when performing a lot of actions involving writing trees, e.g. when doing many merges. Fix the issue by instead handing in a shared buffer, which is then re-used across the calls without having to re-allocate between calls.

72cee168

2016-12-02T16:14:47

remote: fix typo in git_fetch_init_options docs

5569778a

2016-11-15T11:15:40

Bump version number to v0.25

8d400c09

2016-11-01T17:49:07

transaction: fix documentation

788fcdb8

2016-11-01T17:46:57

remote: fix documentation and indent

2adac910

2016-11-01T17:46:37

remote: unused function typedef

8d2784d5

2016-11-01T17:46:20

describe: fix documentation

6502398f

2016-11-01T16:55:16

proxy: fix typo in documentation

6d8ecf08

2016-10-16T00:43:27

patch: minor documentation fix. Fix @return description of git_patch_num_lines_in_hunk.

3e22bb71

2016-09-28T14:45:18

Update submodule update opts init as per code review Update the `GIT_SUBMODULE_UPDATE_OPTIONS_INIT` definition with the correct values after removing `clone_checkout_strategy` in `git_submodule_update_options`.

567fd782

2016-09-26T19:32:15

Remove `clone_checkout_strategy` in submodule update opts Remove `clone_checkout_strategy` in `git_submodule_update_options` as per issue #3784.

93392cdd

2016-10-09T11:27:56

docs: GIT_OPT_ENABLE_STRICT_OBJECT_CREATION is enabled We changed the defaults on strict object creation - it is enabled by default. Update the documentation to reflect that.

82d4c0e6

2016-10-05T12:55:53

revwalk: update the description for the default sorting It changed from implementation-defined to git's default sorting, as there are systems (e.g. rebase) which depend on this order. Also specify more explicitly how you can get git's "date-order".

2749ff46

2016-09-13T15:52:43

time: Export `git_time_monotonic`

adedac5a

2016-09-02T02:03:45

diff: treat binary patches with no data special When creating and printing diffs, deal with binary deltas that have binary data specially, versus diffs that have a binary file but lack the actual binary data.

452bf57c

2016-08-27T13:42:53

Make symbolic ref target validation optional Introduce GIT_OPT_ENABLE_SYMBOLIC_REF_TARGET_VALIDATION option. Setting this option to 0 allows validation of a symbolic ref's target to be bypassed. This option is enabled by default. This mechanism is added primarily to address a discrepancy between git behaviour and libgit2 behaviour, whereby the former allows the symbolic ref target to carry an arbitrary string and the latter does not, so: $ git symbolic-ref refs/heads/foo bar $ cat .git/refs/heads/foo ref: bar where as attempting the same via libgit2 raises an error: The given reference name 'bar' is not valid this mechanism also allows those that might want to make use of git's more lenient treatment of symbolic ref targets to do so.

5625d86b

2016-05-17T15:40:32

index: support index v4 Support reading and writing index v4. Index v4 uses a very simple compression scheme for pathnames, but is otherwise similar to index v3. Signed-off-by: David Turner <dturner@twitter.com>

e2e7f31a

2016-08-05T20:00:22

diff: document `git_diff_from_buffer`

8f09a98e

2016-07-14T16:23:24

odb: freshen existing objects when writing When writing an object, we calculate its OID and see if it exists in the object database. If it does, we need to freshen the file that contains it.

002c8e29

2016-08-03T17:09:41

git_diff_file: move `id_abbrev` Move `id_abbrev` to a more reasonable place where it packs more nicely (before anybody starts using it).

60e15ecd

2016-07-15T17:18:39

packbuilder: `size_t` all the things After 1cd65991, we were passing a pointer to an `unsigned long` to a function that now expected a pointer to a `size_t`. These types differ on 64-bit Windows, which means that we trash the stack. Use `size_t`s in the packbuilder to avoid this.

f1dba144

2016-07-05T09:41:51

Add get user agent functionality.

ebeb56f0

2016-07-01T18:45:10

Merge pull request #3711 from joshtriplett/git_repository_discover_default Add GIT_REPOSITORY_OPEN_FROM_ENV flag to respect $GIT_* environment vars

de43efcf

2016-06-28T16:07:25

submodule: Try to fetch when update fails to find the target commit in the submodule.

20302aa4

2016-06-25T23:33:05

Merge pull request #3223 from ethomson/apply Reading patch files

0dd98b69

2016-04-03T17:22:07

Add GIT_REPOSITORY_OPEN_FROM_ENV flag to respect $GIT_* environment vars git_repository_open_ext provides parameters for the start path, whether to search across filesystems, and what ceiling directories to stop at. git commands have standard environment variables and defaults for each of those, as well as various other parameters of the repository. To avoid duplicate environment variable handling in users of libgit2, add a GIT_REPOSITORY_OPEN_FROM_ENV flag, which makes git_repository_open_ext automatically handle the appropriate environment variables. Commands that intend to act just like those built into git itself can use this flag to get the expected default behavior. git_repository_open_ext with the GIT_REPOSITORY_OPEN_FROM_ENV flag respects $GIT_DIR, $GIT_DISCOVERY_ACROSS_FILESYSTEM, $GIT_CEILING_DIRECTORIES, $GIT_INDEX_FILE, $GIT_NAMESPACE, $GIT_OBJECT_DIRECTORY, and $GIT_ALTERNATE_OBJECT_DIRECTORIES. In the future, when libgit2 gets worktree support, git_repository_open_env will also respect $GIT_WORK_TREE and $GIT_COMMON_DIR; until then, git_repository_open_ext with this flag will error out if either $GIT_WORK_TREE or $GIT_COMMON_DIR is set.

thodg/libgit2/include

include

Log