kmx git

Commit	Date	Message
690bf41c	2013-06-10T15:16:44	keep source similarity in rename detection
f7e56150	2013-06-05T15:41:42	Make mkdir early exit cases clearer There are two places where git_futils_mkdir should exit early or at least do less. The first is when using GIT_MKDIR_SKIP_LAST and having that flag leave no directory left to create; it was being handled previously, but the behavior was subtle. Now I put in a clear explicit check that exits early in that case. The second is when there is no directory to create, but there is a valid path that should be verified. I shifted the logic a bit so we'll be better about not entering the loop than that happens.
999d4405	2013-06-05T12:02:28	Simplify git_futils_mkdir This routine was (is) pretty complicated, but given the recent changes, it seemed like it could be simplified a bit.
2e1fa15f	2013-06-05T19:00:16	I'm a dick
b832ecf7	2013-06-05T09:46:51	Ensure git_futils_mkdir won't mkdir root This makes sure that git_futils_mkdir always skips over the root directory at a minimum, even on platforms where the root is not simply '/'. Also, this removes the GIT_WIN32 ifdef in favor of making EACCES as a potentially recoverable error on all platforms.
e236b37f	2013-06-05T09:16:19	Merge pull request #1633 from jamill/directory_create_fix Allow creation of directories under the volume root in Win32
daf98cb2	2013-06-04T14:49:39	Allow creation of directories under the volume root in Win32 We ran into an issue where cloning a repository to a folder directly underneath the root of a volume (e.g. 'd:\libgit2') would fail with an access denied error. This was traced down to a call to make a directory that is the root (e.g. 'd:') could return an error indicated access denied instead of an error indicating the path already exists. This change now handles the access denied error on Win32 and checks for the existence of the folder.
947fad4f	2013-06-03T09:28:58	Merge pull request #1624 from libgit2/vmg/full-ref-iterator Breaking RefDB changes
dc33b3d7	2013-06-02T02:13:45	Don't bail on parsing commits with an invalid timezone git doesn't do that, and it's not something that's usually actionable to fix. if you have a git repository with one bad timezone in the history, it's too late to change it most likely.
03a89070	2013-05-31T21:49:40	Make git_index_read_tree preserve stat cache Instead of just blowing away the stat cache data when loading a new tree into the index, this checks if each loaded item has a corresponding existing item with the same OID and if so, copies the stat data from the old item to the new one so it will not be blown away.
cee695ae	2013-05-31T12:18:43	Make iterators use GIT_ITEROVER & smart advance 1. internal iterators now return GIT_ITEROVER when you go past the last item in the iteration. 2. git_iterator_advance will "advance" to the first item in the iteration if it is called immediately after creating the iterator, which allows a simpler idiom for basic iteration. 3. if git_iterator_advance encounters an error reading data (e.g. a missing tree or an unreadable file), it returns the error but also attempts to advance past the invalid data to prevent an infinite loop. Updated all tests and internal usage of iterators to account for these new behaviors.
17ef7dbc	2013-05-31T09:51:53	Merge pull request #1626 from ethomson/index_ext_truncation improve test for index extension truncation
8c2458be	2013-05-31T11:41:33	improve test for index extension truncation
8d863aa2	2013-05-31T06:01:59	Merge pull request #1621 from NHDaly/clone_transport_flags Added support for setting transport flags (No check SSL cert) to git_clo...
88392914	2013-05-30T01:12:27	Added support for setting transport flags (No check SSL cert) to git_clone call.
9afc5971	2013-05-31T03:09:38	Merge pull request #1559 from carlosmn/ref-shorthand Introduce git_reference_shorthand
af2c72d2	2013-05-31T03:08:48	Merge pull request #1623 from yorah/fix/tag_auto remote: make default tag retrieving behaviour consistent
1ed356dc	2013-05-30T21:04:28	Frees
df50512a	2013-05-30T18:06:54	Proposal to handle default value (auto = 0)
215af2cc	2013-05-30T17:40:56	remote: make default tag retrieving behaviour consistent Default for newly created remotes will be auto. Default when loading existing remotes with no tag retrieving behaviour set, was already auto.
b2984e8a	2013-05-30T08:43:14	Merge pull request #1622 from yorah/fix/thread-segfault thread: fix segfault on Windows 64 bits
979f75d8	2013-05-30T17:19:43	Refcounting
d17db2fd	2013-05-30T11:30:34	thread: fix segfault on Windows 64 bits `lpExitCode` is a pointer to a long. A long is 32 bits wide on Windows. It means that on Windows 64bits, `GetExitCodeThread()` doesn't set/clear the high-order bytes of the 64 bits memory space pointed at by `value_ptr`.
4e6e2ff2	2013-05-30T03:47:10	...Aaaand this works
2d160ef7	2013-05-29T16:03:30	allow (ignore) bare slash in gitignore
ec24e542	2013-05-29T22:47:37	What are the chances, really
56960b83	2013-05-28T20:47:55	Liike this
2638a03a	2013-05-28T17:50:47	This refs iterator pleases the gods.
9007c53f	2013-05-27T16:45:22	Fixing unwrapped calloc
563c19a9	2013-05-11T11:36:29	packbuilder: also write index in git_packbuilder_write git_packbuilder_write() used to write a packfile to the passed file path. Instead, ask for a destination directory and create both the packfile and an index, as most users probably do expect.
c37fb41a	2013-05-25T12:35:55	qsort_r appeared in glibc 2.8
7a5ee3dc	2013-05-24T11:09:04	Add ~ expansion to global attributes and excludes This adds ~/ prefix expansion for the value of core.attributesfile and core.excludesfile, plus it fixes the fact that the attributes cache was holding on to the string data from the config for a long time (instead of making its own strdup) which could have caused a problem if the config was refreshed. Adds a test for the new expansion capability.
d20b0449	2013-05-24T10:37:40	Clarify GIT_DIFF_INCLUDE_UNTRACKED_CONTENT option This improves the docs for GIT_DIFF_INCLUDE_UNTRACKED_CONTENT as well as the other flags related to UNTRACKED items in diff, plus it makes that flag now automatically turn on GIT_DIFF_INCLUDE_UNTRACKED which seems like a reasonable dwim type of change.
16adc9fa	2013-05-24T10:35:58	Typedef git_config_level_t and use it everywhere The GIT_CONFIG_LEVEL constants actually work well as an enum because they are mutually exclusive, so this adds a typedef to the enum and uses that everywhere that one of these constants are expected, instead of the old code that typically used an unsigned int.
2e62e7c2	2013-05-24T10:33:41	Docs for git_libgit2_opts and cache disable tweak This adds docs for the cache control options to git_libgit2_opts and also tweaks the cache code so that if the cache is disabled, then the next time we attempt to insert something into the cache in question, we will actually clear any old cached objects.
43efc449	2013-05-16T11:03:55	Ensure reuc vector is always valid In theory, if there was a problem reading the REUC data, the read_reuc() routine could have left uninitialized and invalid data in the git_index vector. This moves the line that inserts a new entry into the vector down to the bottom of the routine so we know all the content is already valid. Also, per @linquize, this uses calloc to ensure no uninitialized data.
25a899ec	2013-05-24T10:30:32	qsort_r is broken on HURD, avoid
26ab6284	2013-05-24T03:30:35	Merge pull request #1593 from ethomson/conflict_iterator introduce git_conflict_iterator
f7ceef06	2013-05-24T03:24:27	Merge pull request #1592 from ethomson/merge_setup merge setup
4811c150	2013-05-24T01:14:52	Merge pull request #1603 from ben/shallow Shallow-clone detection
30caf0cf	2013-05-24T01:13:48	Merge pull request #1595 from arrbee/even-more-rename-fixes Even more rename detection fixes
6f0b8142	2013-05-23T17:28:52	Stop leaking memory
0700ca1a	2013-05-23T16:11:53	More config code checks and cleanups
3b32b6d3	2013-05-23T09:19:42	More tests of config with various absent files Plus a bit of extra paranoia to ensure config object has valid contents.
49f70f2c	2013-05-23T15:48:06	Fill out diff rename test coverage This extends the rename tests to make sure that every rename scenario in the inner loop of git_diff_find_similar is actually exercised. Also, fixes an incorrect assert that was in one of the clauses that was not previously being exercised.
93d8f77f	2013-05-23T15:11:53	Improve test failure output
f38cea97	2013-05-23T15:21:43	Move core.abbrev lookup out of diff print loop This moves the GIT_CVAR_ABBREV lookup out of the loop. Also, this fixes git_diff_print_raw to actually use that constant instead of hardcoding 7 characters.
67db583d	2013-05-23T15:06:07	More diff rename tests; better split swap handling This adds a couple more tests of different rename scenarios. Also, this fixes a problem with the case where you have two "split" deltas and the left half of one matches the right half of the other. That case was already being handled, but in the wrong order in a way that could result in bad output. Also, if the swap also happened to put the other two halves into the correct place (i.e. two files exchanged places with each other), then the second delta was left with the SPLIT flag set when it really should be cleared.
c68b09dc	2013-05-23T11:52:34	Fix dereference of freed delta I was accidentally using a value that I had just freed. This moves the clearing of the delta internal flags into a better place.
9c941ccf	2013-05-23T08:52:24	Merge pull request #1599 from nulltoken/topic/windows_resources Update windows resources to match the dll name
a21cbb12	2013-05-22T10:37:12	Significant rename detection rewrite This flips rename detection around so instead of creating a forward mapping from deltas to possible rename targets, instead it creates a reverse mapping, looking at possible targets and trying to find a source that they could have been renamed or copied from. This is important because each output can only have a single source, but a given source could map to multiple outputs (in the form of COPIED records). Additionally, this makes a couple of tweaks to the public rename detection APIs, mostly renaming a couple of options that control the behavior to make more sense and to be more like core Git. I walked through the tests looking at the exact results and updated the expectations based on what I saw. The new code is different from the old because it cannot give some nonsense results (like A was renamed to both B and C) which were part of the outputs previously.
52f537e9	2013-05-22T02:04:12	Bugfix: Return NULL in push_leaf, when trie is full os->full was set 1, but the overflowed idx_leaf was still used to index into os->nodes a little later. Returning NULL fixes that.
095bfd74	2013-05-21T11:38:24	cmake: Update Windows resources to reflect the optional vendor string Make InternalName and OriginalFilename resources reflect the name of the compiled binary.
6828bf26	2013-05-21T10:49:36	Merge pull request #1594 from nulltoken/topic/tag_annotation tag: Introduce git_tag_annotation_create()
b81cc1d6	2013-05-18T16:52:16	tag: Introduce git_tag_annotation_create()
4742148d	2013-05-20T13:41:39	Add more diff rename detection tests This adds a bunch more rename detection tests including checks vs the working directory, the new exact match options, some more whitespace variants, etc. This also adds a git_futils_writebuffer helper function and uses it in checkout. This is mainly added because I wanted an easy way to write out a git_buf to disk inside my test code.
9be5be47	2013-05-20T13:37:21	More git_diff_find_similar improvements - Add new GIT_DIFF_FIND_EXACT_MATCH_ONLY flag to do similarity matching without using the similarity metric (i.e. only compare the SHA). - Clean up the similarity measurement code to more rigorously distinguish between files that are not similar and files that are not comparable (previously, a 0 could either mean that the files could not be compared or that they were totally different) - When splitting a MODIFIED file into a DELETE/ADD pair, actually make a DELETED/UNTRACKED pair if the right side of the diff is from the working directory. This prevents an odd mix of ADDED and UNTRACKED files on workdir diffs.
038c1654	2013-05-19T01:41:00	Initialize loose_deleted before it is used for a check later on.
d958e37a	2013-05-17T17:21:45	Fix issues with git_diff_find_similar There are a number of bugs in the rename code that only were obvious when I started testing it against large old repos with more complex patterns. (The code to do that testing is not ready to merge with libgit2, but I do plan to add more thorough tests.) This contains a significant number of changes and also tweaks the public API slightly to make emulating core git easier. Most notably, this separates the GIT_DIFF_FIND_AND_BREAK_REWRITES flag into FIND_REWRITES (which adds a self-similarity score to every modified file) and BREAK_REWRITES (which splits the modified deltas into add/remove pairs in the diff list). When you do a raw output of core git, rewrites show up as M090 or such, not at A and D output, so I wanted to be able to emulate that. Publicly, this also changes the flags to be uint16_t since we don't need values out of that range. Internally, this contains significant changes from a number of small bug fixes (like using the wrong side of the diff to decide if the object could be found in the ODB vs the workdir) to larger issues about which files can and should be compared and how the various edge cases of similarity scores should be treated. Honestly, I don't think this is the last update that will have to be made to this code, but I think this moves us closer to correct behavior and I tried to document the code so it would be easier to follow..
0293450e	2013-05-17T16:57:49	Fix delta compare to use correct pathname The delta cmp function needs to choose the correct path for ordering when a delta is ADDED, RENAMED, or COPIED.
aadfa85b	2013-05-17T16:41:15	Add git_diff_print_raw printing helper Makes it easier to emulate the --raw option
660d59ca	2013-05-17T16:40:00	Add git_oid_nfmt - a flexible OID formatter I frequently want to the the first N digits of an OID formatted as a string and I'd like it to be efficient. This function makes that easy and I could rewrite the OID formatters in terms of it.
0e0108f7	2013-05-17T15:59:57	introduce git_conflict_iterator
9c06b250	2013-05-16T13:04:37	merge setup
f672cd2a	2013-05-10T20:15:57	revparse: Make revparse_ext() return git_reference from names as well
e841c533	2013-05-09T16:42:39	revparse: Introduce git_revparse_ext() Expose a way to retrieve, along with the target git_object, the reference pointed at by some revparse expression (`@{<-n>}` or `<branchname>@{upstream}` syntax).
dcaa898d	2013-05-09T16:52:04	revparse: Simplify temporary reference freeing
e3107e0e	2013-05-16T11:35:02	Merge pull request #1558 from bmorganpa/ssh_transport SSH Transport
c2d282cf	2013-05-16T11:10:42	Merge pull request #1590 from arrbee/examples-like-git Add cat-file to examples (with some public API improvements)
18e37db9	2013-05-16T11:10:13	Merge pull request #1591 from arrbee/reorder-reuc-read-for-safety Ensure reuc vector is always valid
57908bb3	2013-05-16T11:03:55	Ensure reuc vector is always valid In theory, if there was a problem reading the REUC data, the read_reuc() routine could have left uninitialized and invalid data in the git_index vector. This moves the line that inserts a new entry into the vector down to the bottom of the routine so we know all the content is already valid. Also, per @linquize, this uses calloc to ensure no uninitialized data.
58206c9a	2013-05-16T10:38:27	Add cat-file example and increase const use in API This adds an example implementation that emulates git cat-file. It is a convenient and relatively simple example of getting data out of a repository. Implementing this also revealed that there are a number of APIs that are still not using const pointers to objects that really ought to be. The main cause of this is that `git_vector_bsearch` may need to call `git_vector_sort` before doing the search, so a const pointer to the vector is not allowed. However, for tree objects, with a little care, we can ensure that the vector of tree entries is always sorted and allow lookups to take a const pointer. Also, the missing const in commit objects just looks like an oversight.
7026ad89	2013-05-16T21:08:55	calloc() to initialize memory
12f831fa	2013-05-16T04:41:05	Merge pull request #1586 from jamill/fetch_fix Fetch should not fail when remote HEAD reference is not present locally
96c01991	2013-05-15T09:24:51	Remove entry dup/free functions and fix comments This removes the functions to duplicate and free copies of a git_index_entry and updates the comments to explain that you should just use the public definition of the struct as needed.
797dfb28	2013-05-13T16:09:33	Add APIs to dup and free git_index_entrys This adds git_index_entry_dup to make a copy of an existing entry and git_index_entry_free to release the memory of the copy. It also updates the documentation for git_index_get_bypath and git_index_get_byindex to make it clear that the returned structure should not be modified.
71596200	2013-05-15T15:47:46	Merge pull request #1588 from arrbee/fixes-for-checkout-and-diff Bug fixes for checkout and diff
72b3dd4a	2013-05-15T15:23:33	Use GIT_IDXENTRY_STAGE macro Since I added the GIT_IDXENTRY_STAGE macro to extract the stage from a git_index_entry, we probably don't need an internal inline function to do the same thing.
09fae31d	2013-05-15T14:58:26	Improve robustness of diff rename detection Under some strange circumstances, diffs can end up listing files that we can't actually open successfully. Instead of aborting the git_diff_find_similar, this makes it so that those files just won't be considered as valid rename/copy targets instead.
dcb0f7c0	2013-05-15T14:54:02	Fix checkout of submodules with no .gitmodules It is possible for there to be a submodule in a repository with no .gitmodules file (for example, if the user forgot to commit the .gitmodules file). In this case, core Git will just create an empty directory as a placeholder for the submodule but otherwise ignore it. We were generating an error and stopping the checkout. This makes our behavior match that of core git.
55d3a390	2013-05-15T14:52:12	Remove old symlinks before updating Unlike blob updates, symlink updates cannot be done "in place" writing over an old symlink. This means that in checkout when we realize that we can safely update a symlink, we still need to remove the old one before writing the new.
79ef3be4	2013-05-15T14:50:05	Fix diff crash when last item is untracked dir When the last item in a diff was an untracked directory that only contained ignored items, the loop to scan the contents would run off the end of the iterator and dereference a NULL pointer. This includes a test that reproduces the problem and a fix.
1fed6b07	2013-05-13T21:57:37	Fix trailing whitespaces
6fe02c11	2013-05-15T14:44:35	Fetch should not fail when remote HEAD reference is not present locally
84ac625d	2013-05-15T12:51:40	Added GITERR_CHECK_ALLOC
ccaee222	2013-05-15T12:46:33	Added GITERR_CHECK_ALLOC
e057e411	2013-05-15T12:44:51	Reworked git_cred_ssh_keyfile_passphrase_new method
b54ed3ef	2013-05-15T12:41:16	Added error check
22011b33	2013-05-15T12:38:40	Cleanup
f0ab7372	2013-05-15T17:51:57	signature: Lenient when dupping, strict when creating
0cb16fe9	2013-05-15T20:26:55	Unify whitespaces to tabs
fbcab44b	2013-05-14T16:03:09	Create directory for symlink before creating symlink
99d32707	2013-05-11T06:42:25	Fix refdb iteration early termination bug There was a problem found in the Rugged test suite where the refdb_fs_backend__next function could exit too early in some very specific hashing patterns for packed refs. This ports the Rugged test to libgit2 and then fixes the bug.
e583334c	2013-05-10T21:42:22	Fix broken build when MSVC SDL checks is enabled
b6cc559a	2013-05-11T02:42:49	Merge pull request #1385 from carlosmn/refs-iter Introduce a refs iterator
c58cac12	2013-05-04T18:06:14	Introduce a glob-filtering iterator If the backend doesn't provide support for it, the matching is done in refdb on top of a normal iterator.
9bd89d96	2013-05-04T16:49:39	Move a couple more functions to use iterators
2b562c3a	2013-05-04T16:32:58	refs: remove the OID/SYMBOLIC filtering Nobody should ever be using anything other than ALL at this level, so remove the option altogether. As part of this, git_reference_foreach_glob is now implemented in the frontend using an iterator. Backends will later regain the ability of doing the glob filtering in the backend.
95727245	2013-05-04T16:03:17	refs: implement _foreach with the iterator
51fc5e89	2013-05-04T15:16:55	Make sure the ref iterator works in an repo without physical presence

690bf41c

2013-06-10T15:16:44

keep source similarity in rename detection

f7e56150

2013-06-05T15:41:42

Make mkdir early exit cases clearer There are two places where git_futils_mkdir should exit early or at least do less. The first is when using GIT_MKDIR_SKIP_LAST and having that flag leave no directory left to create; it was being handled previously, but the behavior was subtle. Now I put in a clear explicit check that exits early in that case. The second is when there is no directory to create, but there is a valid path that should be verified. I shifted the logic a bit so we'll be better about not entering the loop than that happens.

999d4405

2013-06-05T12:02:28

Simplify git_futils_mkdir This routine was (is) pretty complicated, but given the recent changes, it seemed like it could be simplified a bit.

2e1fa15f

2013-06-05T19:00:16

I'm a dick

b832ecf7

2013-06-05T09:46:51

Ensure git_futils_mkdir won't mkdir root This makes sure that git_futils_mkdir always skips over the root directory at a minimum, even on platforms where the root is not simply '/'. Also, this removes the GIT_WIN32 ifdef in favor of making EACCES as a potentially recoverable error on all platforms.

e236b37f

2013-06-05T09:16:19

Merge pull request #1633 from jamill/directory_create_fix Allow creation of directories under the volume root in Win32

daf98cb2

2013-06-04T14:49:39

Allow creation of directories under the volume root in Win32 We ran into an issue where cloning a repository to a folder directly underneath the root of a volume (e.g. 'd:\libgit2') would fail with an access denied error. This was traced down to a call to make a directory that is the root (e.g. 'd:') could return an error indicated access denied instead of an error indicating the path already exists. This change now handles the access denied error on Win32 and checks for the existence of the folder.

947fad4f

2013-06-03T09:28:58

Merge pull request #1624 from libgit2/vmg/full-ref-iterator Breaking RefDB changes

dc33b3d7

2013-06-02T02:13:45

Don't bail on parsing commits with an invalid timezone git doesn't do that, and it's not something that's usually actionable to fix. if you have a git repository with one bad timezone in the history, it's too late to change it most likely.

03a89070

2013-05-31T21:49:40

Make git_index_read_tree preserve stat cache Instead of just blowing away the stat cache data when loading a new tree into the index, this checks if each loaded item has a corresponding existing item with the same OID and if so, copies the stat data from the old item to the new one so it will not be blown away.

cee695ae

2013-05-31T12:18:43

Make iterators use GIT_ITEROVER & smart advance 1. internal iterators now return GIT_ITEROVER when you go past the last item in the iteration. 2. git_iterator_advance will "advance" to the first item in the iteration if it is called immediately after creating the iterator, which allows a simpler idiom for basic iteration. 3. if git_iterator_advance encounters an error reading data (e.g. a missing tree or an unreadable file), it returns the error but also attempts to advance past the invalid data to prevent an infinite loop. Updated all tests and internal usage of iterators to account for these new behaviors.

17ef7dbc

2013-05-31T09:51:53

Merge pull request #1626 from ethomson/index_ext_truncation improve test for index extension truncation

8c2458be

2013-05-31T11:41:33

improve test for index extension truncation

8d863aa2

2013-05-31T06:01:59

Merge pull request #1621 from NHDaly/clone_transport_flags Added support for setting transport flags (No check SSL cert) to git_clo...

88392914

2013-05-30T01:12:27

Added support for setting transport flags (No check SSL cert) to git_clone call.

9afc5971

2013-05-31T03:09:38

Merge pull request #1559 from carlosmn/ref-shorthand Introduce git_reference_shorthand

af2c72d2

2013-05-31T03:08:48

Merge pull request #1623 from yorah/fix/tag_auto remote: make default tag retrieving behaviour consistent

1ed356dc

2013-05-30T21:04:28

Frees

df50512a

2013-05-30T18:06:54

Proposal to handle default value (auto = 0)

215af2cc

2013-05-30T17:40:56

remote: make default tag retrieving behaviour consistent Default for newly created remotes will be auto. Default when loading existing remotes with no tag retrieving behaviour set, was already auto.

b2984e8a

2013-05-30T08:43:14

Merge pull request #1622 from yorah/fix/thread-segfault thread: fix segfault on Windows 64 bits

979f75d8

2013-05-30T17:19:43

Refcounting

d17db2fd

2013-05-30T11:30:34

thread: fix segfault on Windows 64 bits `lpExitCode` is a pointer to a long. A long is 32 bits wide on Windows. It means that on Windows 64bits, `GetExitCodeThread()` doesn't set/clear the high-order bytes of the 64 bits memory space pointed at by `value_ptr`.

4e6e2ff2

2013-05-30T03:47:10

...Aaaand this works

2d160ef7

2013-05-29T16:03:30

allow (ignore) bare slash in gitignore

ec24e542

2013-05-29T22:47:37

What are the chances, really

56960b83

2013-05-28T20:47:55

Liike this

2638a03a

2013-05-28T17:50:47

This refs iterator pleases the gods.

9007c53f

2013-05-27T16:45:22

Fixing unwrapped calloc

563c19a9

2013-05-11T11:36:29

packbuilder: also write index in git_packbuilder_write git_packbuilder_write() used to write a packfile to the passed file path. Instead, ask for a destination directory and create both the packfile and an index, as most users probably do expect.

c37fb41a

2013-05-25T12:35:55

qsort_r appeared in glibc 2.8

7a5ee3dc

2013-05-24T11:09:04

Add ~ expansion to global attributes and excludes This adds ~/ prefix expansion for the value of core.attributesfile and core.excludesfile, plus it fixes the fact that the attributes cache was holding on to the string data from the config for a long time (instead of making its own strdup) which could have caused a problem if the config was refreshed. Adds a test for the new expansion capability.

d20b0449

2013-05-24T10:37:40

Clarify GIT_DIFF_INCLUDE_UNTRACKED_CONTENT option This improves the docs for GIT_DIFF_INCLUDE_UNTRACKED_CONTENT as well as the other flags related to UNTRACKED items in diff, plus it makes that flag now automatically turn on GIT_DIFF_INCLUDE_UNTRACKED which seems like a reasonable dwim type of change.

16adc9fa

2013-05-24T10:35:58

Typedef git_config_level_t and use it everywhere The GIT_CONFIG_LEVEL constants actually work well as an enum because they are mutually exclusive, so this adds a typedef to the enum and uses that everywhere that one of these constants are expected, instead of the old code that typically used an unsigned int.

2e62e7c2

2013-05-24T10:33:41

Docs for git_libgit2_opts and cache disable tweak This adds docs for the cache control options to git_libgit2_opts and also tweaks the cache code so that if the cache is disabled, then the next time we attempt to insert something into the cache in question, we will actually clear any old cached objects.

43efc449

2013-05-16T11:03:55

Ensure reuc vector is always valid In theory, if there was a problem reading the REUC data, the read_reuc() routine could have left uninitialized and invalid data in the git_index vector. This moves the line that inserts a new entry into the vector down to the bottom of the routine so we know all the content is already valid. Also, per @linquize, this uses calloc to ensure no uninitialized data.

25a899ec

2013-05-24T10:30:32

qsort_r is broken on HURD, avoid

26ab6284

2013-05-24T03:30:35

Merge pull request #1593 from ethomson/conflict_iterator introduce git_conflict_iterator

f7ceef06

2013-05-24T03:24:27

Merge pull request #1592 from ethomson/merge_setup merge setup

4811c150

2013-05-24T01:14:52

Merge pull request #1603 from ben/shallow Shallow-clone detection

30caf0cf

2013-05-24T01:13:48

Merge pull request #1595 from arrbee/even-more-rename-fixes Even more rename detection fixes

6f0b8142

2013-05-23T17:28:52

Stop leaking memory

0700ca1a

2013-05-23T16:11:53

More config code checks and cleanups

3b32b6d3

2013-05-23T09:19:42

More tests of config with various absent files Plus a bit of extra paranoia to ensure config object has valid contents.

49f70f2c

2013-05-23T15:48:06

Fill out diff rename test coverage This extends the rename tests to make sure that every rename scenario in the inner loop of git_diff_find_similar is actually exercised. Also, fixes an incorrect assert that was in one of the clauses that was not previously being exercised.

93d8f77f

2013-05-23T15:11:53

Improve test failure output

f38cea97

2013-05-23T15:21:43

Move core.abbrev lookup out of diff print loop This moves the GIT_CVAR_ABBREV lookup out of the loop. Also, this fixes git_diff_print_raw to actually use that constant instead of hardcoding 7 characters.

67db583d

2013-05-23T15:06:07

More diff rename tests; better split swap handling This adds a couple more tests of different rename scenarios. Also, this fixes a problem with the case where you have two "split" deltas and the left half of one matches the right half of the other. That case was already being handled, but in the wrong order in a way that could result in bad output. Also, if the swap also happened to put the other two halves into the correct place (i.e. two files exchanged places with each other), then the second delta was left with the SPLIT flag set when it really should be cleared.

c68b09dc

2013-05-23T11:52:34

Fix dereference of freed delta I was accidentally using a value that I had just freed. This moves the clearing of the delta internal flags into a better place.

9c941ccf

2013-05-23T08:52:24

Merge pull request #1599 from nulltoken/topic/windows_resources Update windows resources to match the dll name

a21cbb12

2013-05-22T10:37:12

Significant rename detection rewrite This flips rename detection around so instead of creating a forward mapping from deltas to possible rename targets, instead it creates a reverse mapping, looking at possible targets and trying to find a source that they could have been renamed or copied from. This is important because each output can only have a single source, but a given source could map to multiple outputs (in the form of COPIED records). Additionally, this makes a couple of tweaks to the public rename detection APIs, mostly renaming a couple of options that control the behavior to make more sense and to be more like core Git. I walked through the tests looking at the exact results and updated the expectations based on what I saw. The new code is different from the old because it cannot give some nonsense results (like A was renamed to both B and C) which were part of the outputs previously.

52f537e9

2013-05-22T02:04:12

Bugfix: Return NULL in push_leaf, when trie is full os->full was set 1, but the overflowed idx_leaf was still used to index into os->nodes a little later. Returning NULL fixes that.

095bfd74

2013-05-21T11:38:24

cmake: Update Windows resources to reflect the optional vendor string Make InternalName and OriginalFilename resources reflect the name of the compiled binary.

6828bf26

2013-05-21T10:49:36

Merge pull request #1594 from nulltoken/topic/tag_annotation tag: Introduce git_tag_annotation_create()

b81cc1d6

2013-05-18T16:52:16

tag: Introduce git_tag_annotation_create()

4742148d

2013-05-20T13:41:39

Add more diff rename detection tests This adds a bunch more rename detection tests including checks vs the working directory, the new exact match options, some more whitespace variants, etc. This also adds a git_futils_writebuffer helper function and uses it in checkout. This is mainly added because I wanted an easy way to write out a git_buf to disk inside my test code.

9be5be47

2013-05-20T13:37:21

More git_diff_find_similar improvements - Add new GIT_DIFF_FIND_EXACT_MATCH_ONLY flag to do similarity matching without using the similarity metric (i.e. only compare the SHA). - Clean up the similarity measurement code to more rigorously distinguish between files that are not similar and files that are not comparable (previously, a 0 could either mean that the files could not be compared or that they were totally different) - When splitting a MODIFIED file into a DELETE/ADD pair, actually make a DELETED/UNTRACKED pair if the right side of the diff is from the working directory. This prevents an odd mix of ADDED and UNTRACKED files on workdir diffs.

038c1654

2013-05-19T01:41:00

Initialize loose_deleted before it is used for a check later on.

d958e37a

2013-05-17T17:21:45

Fix issues with git_diff_find_similar There are a number of bugs in the rename code that only were obvious when I started testing it against large old repos with more complex patterns. (The code to do that testing is not ready to merge with libgit2, but I do plan to add more thorough tests.) This contains a significant number of changes and also tweaks the public API slightly to make emulating core git easier. Most notably, this separates the GIT_DIFF_FIND_AND_BREAK_REWRITES flag into FIND_REWRITES (which adds a self-similarity score to every modified file) and BREAK_REWRITES (which splits the modified deltas into add/remove pairs in the diff list). When you do a raw output of core git, rewrites show up as M090 or such, not at A and D output, so I wanted to be able to emulate that. Publicly, this also changes the flags to be uint16_t since we don't need values out of that range. Internally, this contains significant changes from a number of small bug fixes (like using the wrong side of the diff to decide if the object could be found in the ODB vs the workdir) to larger issues about which files can and should be compared and how the various edge cases of similarity scores should be treated. Honestly, I don't think this is the last update that will have to be made to this code, but I think this moves us closer to correct behavior and I tried to document the code so it would be easier to follow..

0293450e

2013-05-17T16:57:49

Fix delta compare to use correct pathname The delta cmp function needs to choose the correct path for ordering when a delta is ADDED, RENAMED, or COPIED.

aadfa85b

2013-05-17T16:41:15

Add git_diff_print_raw printing helper Makes it easier to emulate the --raw option

660d59ca

2013-05-17T16:40:00

Add git_oid_nfmt - a flexible OID formatter I frequently want to the the first N digits of an OID formatted as a string and I'd like it to be efficient. This function makes that easy and I could rewrite the OID formatters in terms of it.

0e0108f7

2013-05-17T15:59:57

introduce git_conflict_iterator

9c06b250

2013-05-16T13:04:37

merge setup

f672cd2a

2013-05-10T20:15:57

revparse: Make revparse_ext() return git_reference from names as well

e841c533

2013-05-09T16:42:39

revparse: Introduce git_revparse_ext() Expose a way to retrieve, along with the target git_object, the reference pointed at by some revparse expression (`@{<-n>}` or `<branchname>@{upstream}` syntax).

dcaa898d

2013-05-09T16:52:04

revparse: Simplify temporary reference freeing

e3107e0e

2013-05-16T11:35:02

Merge pull request #1558 from bmorganpa/ssh_transport SSH Transport

c2d282cf

2013-05-16T11:10:42

Merge pull request #1590 from arrbee/examples-like-git Add cat-file to examples (with some public API improvements)

18e37db9

2013-05-16T11:10:13

Merge pull request #1591 from arrbee/reorder-reuc-read-for-safety Ensure reuc vector is always valid

57908bb3

2013-05-16T11:03:55

Ensure reuc vector is always valid In theory, if there was a problem reading the REUC data, the read_reuc() routine could have left uninitialized and invalid data in the git_index vector. This moves the line that inserts a new entry into the vector down to the bottom of the routine so we know all the content is already valid. Also, per @linquize, this uses calloc to ensure no uninitialized data.

58206c9a

2013-05-16T10:38:27

Add cat-file example and increase const use in API This adds an example implementation that emulates git cat-file. It is a convenient and relatively simple example of getting data out of a repository. Implementing this also revealed that there are a number of APIs that are still not using const pointers to objects that really ought to be. The main cause of this is that `git_vector_bsearch` may need to call `git_vector_sort` before doing the search, so a const pointer to the vector is not allowed. However, for tree objects, with a little care, we can ensure that the vector of tree entries is always sorted and allow lookups to take a const pointer. Also, the missing const in commit objects just looks like an oversight.

7026ad89

2013-05-16T21:08:55

calloc() to initialize memory

12f831fa

2013-05-16T04:41:05

Merge pull request #1586 from jamill/fetch_fix Fetch should not fail when remote HEAD reference is not present locally

96c01991

2013-05-15T09:24:51

Remove entry dup/free functions and fix comments This removes the functions to duplicate and free copies of a git_index_entry and updates the comments to explain that you should just use the public definition of the struct as needed.

797dfb28

2013-05-13T16:09:33

Add APIs to dup and free git_index_entrys This adds git_index_entry_dup to make a copy of an existing entry and git_index_entry_free to release the memory of the copy. It also updates the documentation for git_index_get_bypath and git_index_get_byindex to make it clear that the returned structure should *not* be modified.

71596200

2013-05-15T15:47:46

Merge pull request #1588 from arrbee/fixes-for-checkout-and-diff Bug fixes for checkout and diff

72b3dd4a

2013-05-15T15:23:33

Use GIT_IDXENTRY_STAGE macro Since I added the GIT_IDXENTRY_STAGE macro to extract the stage from a git_index_entry, we probably don't need an internal inline function to do the same thing.

09fae31d

2013-05-15T14:58:26

Improve robustness of diff rename detection Under some strange circumstances, diffs can end up listing files that we can't actually open successfully. Instead of aborting the git_diff_find_similar, this makes it so that those files just won't be considered as valid rename/copy targets instead.

dcb0f7c0

2013-05-15T14:54:02

Fix checkout of submodules with no .gitmodules It is possible for there to be a submodule in a repository with no .gitmodules file (for example, if the user forgot to commit the .gitmodules file). In this case, core Git will just create an empty directory as a placeholder for the submodule but otherwise ignore it. We were generating an error and stopping the checkout. This makes our behavior match that of core git.

55d3a390

2013-05-15T14:52:12

Remove old symlinks before updating Unlike blob updates, symlink updates cannot be done "in place" writing over an old symlink. This means that in checkout when we realize that we can safely update a symlink, we still need to remove the old one before writing the new.

79ef3be4

2013-05-15T14:50:05

Fix diff crash when last item is untracked dir When the last item in a diff was an untracked directory that only contained ignored items, the loop to scan the contents would run off the end of the iterator and dereference a NULL pointer. This includes a test that reproduces the problem and a fix.

1fed6b07

2013-05-13T21:57:37

Fix trailing whitespaces

6fe02c11

2013-05-15T14:44:35

Fetch should not fail when remote HEAD reference is not present locally

84ac625d

2013-05-15T12:51:40

Added GITERR_CHECK_ALLOC

ccaee222

2013-05-15T12:46:33

Added GITERR_CHECK_ALLOC

e057e411

2013-05-15T12:44:51

Reworked git_cred_ssh_keyfile_passphrase_new method

b54ed3ef

2013-05-15T12:41:16

Added error check

22011b33

2013-05-15T12:38:40

Cleanup

f0ab7372

2013-05-15T17:51:57

signature: Lenient when dupping, strict when creating

0cb16fe9

2013-05-15T20:26:55

Unify whitespaces to tabs

fbcab44b

2013-05-14T16:03:09

Create directory for symlink before creating symlink

99d32707

2013-05-11T06:42:25

Fix refdb iteration early termination bug There was a problem found in the Rugged test suite where the refdb_fs_backend__next function could exit too early in some very specific hashing patterns for packed refs. This ports the Rugged test to libgit2 and then fixes the bug.

e583334c

2013-05-10T21:42:22

Fix broken build when MSVC SDL checks is enabled

b6cc559a

2013-05-11T02:42:49

Merge pull request #1385 from carlosmn/refs-iter Introduce a refs iterator

c58cac12

2013-05-04T18:06:14

Introduce a glob-filtering iterator If the backend doesn't provide support for it, the matching is done in refdb on top of a normal iterator.

9bd89d96

2013-05-04T16:49:39

Move a couple more functions to use iterators

2b562c3a

2013-05-04T16:32:58

refs: remove the OID/SYMBOLIC filtering Nobody should ever be using anything other than ALL at this level, so remove the option altogether. As part of this, git_reference_foreach_glob is now implemented in the frontend using an iterator. Backends will later regain the ability of doing the glob filtering in the backend.

95727245

2013-05-04T16:03:17

refs: implement _foreach with the iterator

51fc5e89

2013-05-04T15:16:55

Make sure the ref iterator works in an repo without physical presence

thodg/libgit2/src

src

Log