kmx git

Commit	Date	Message
3be73011	2018-06-11T18:26:22	Merge pull request #4436 from pks-t/pks/packfile-stream-free pack: rename `git_packfile_stream_free`
ecf4f33a	2018-02-08T11:14:48	Convert usage of `git_buf_free` to new `git_buf_dispose`
d22fd81c	2018-06-05T16:46:07	ignore: remove now-useless check for LEADINGDIR When checking whether a rule negates another rule, we were checking whether a rule had the `GIT_ATTR_FNMATCH_LEADINGDIR` flag set and, if so, added a "/*" to its end before passing it to `fnmatch`. Our code now sets `GIT_ATTR_FNMATCH_NOLEADINGDIR`, thus the `LEADINGDIR` flag shall never be set. Furthermore, due to the `NOLEADINGDIR` flag, trailing globs do not get consumed by our ignore parser anymore. Clean up code by just dropping this now useless logic.
20b4c175	2018-06-05T16:12:58	ignore: fix negative leading directory rules unignoring subdirectory files When computing whether a file is ignored, we simply search for the first matching rule and return whether it is a positive ignore rule (the file is really ignored) or whether it is a negative ignore rule (the file is being unignored). Each rule has a set of flags which are being passed to `fnmatch`, depending on what kind of rule it is. E.g. in case it is a negative ignore we add a flag `GIT_ATTR_FNMATCH_NEGATIVE`, in case it contains a glob we set the `GIT_ATTR_FNMATCH_HASGLOB` flag. One of these flags is the `GIT_ATTR_FNMATCH_LEADINGDIR` flag, which is always set in case the pattern has a trailing "/" or in case the pattern is negative. The flag causes the `fnmatch` function to return a match in case a string is a leading directory of another, e.g. "dir/" matches "dir/foo/bar.c". In case of negative patterns, this is wrong in certain cases. Take the following simple example of a gitignore: dir/ !dir/ The `LEADINGDIR` flag causes "!dir/" to match "dir/foo/bar.c", and we correctly unignore the directory. But take this example: .test !dir/* We expect everything in "dir/" to be unignored, but e.g. a file in a subdirectory of dir should be ignored, as the "" does not cross directory hierarchies. With `LEADINGDIR`, though, we would just see that "dir/" matches and return that the file is unignored, even if it is contained in a subdirectory. Instead, we want to ignore leading directories here and check ".test". Afterwards, we have to iterate up to the parent directory and do the same checks. To fix the issue, disallow matching against leading directories in gitignore files. This can be trivially done by just adding the `GIT_ATTR_FNMATCH_NOLEADINGDIR` to the spec passed to `git_attr_fnmatch__parse`. Due to a bug in that function, though, this flag is being ignored for negative patterns, which is fixed in this commit, as well. As a last fix, we need to ignore rules that are supposed to match a directory when our path itself is a file. All together, these changes fix the described error case.
251d8771	2018-04-06T12:24:10	attr_file: fix handling of directory patterns with trailing spaces When comparing whether a path matches a directory rule, we pass the both the path and directory name to `fnmatch` with `GIT_ATTR_FNMATCH_DIRECTORY` being set. `fnmatch` expects the pattern to contain no trailing directory '/', which is why we try to always strip patterns of trailing slashes. We do not handle that case correctly though when the pattern itself has trailing spaces, causing the match to fail. Fix the issue by stripping trailing spaces and tabs for a rule previous to checking whether the pattern is a directory pattern with a trailing '/'. This replaces the whitespace-stripping in our ignore file parsing code, which was stripping whitespaces too late. Add a test to catch future breakage.
a33deeb4	2018-02-28T12:20:23	win32: strncmp -> git__strncmp The win32 C library is compiled cdecl, however when configured with `STDCALL=ON`, our functions (and function pointers) will use the stdcall calling convention. You cannot set a `__stdcall` function pointer to a `__cdecl` function, so it's easier to just use our `git__strncmp` instead of sorting that mess out.
e28e17e6	2018-02-01T10:36:33	attr: avoid stat'ting files for bare repositories Depending on whether the path we want to look up an attribute for is a file or a directory, the fnmatch function will be called with different flags. Because of this, we have to first stat(3) the path to determine whether it is a file or directory in `git_attr_path__init`. This is wasteful though in bare repositories, where we can already be assured that the path will never exist at all due to there being no worktree. In this case, we will execute an unnecessary syscall, which might be noticeable on networked file systems. What happens right now is that we always pass the `GIT_DIR_FLAG_UNKOWN` flag to `git_attr_path__init`, which causes it to `stat` the file itself to determine its type. As it is calling `git_path_isdir` on the path, which will always return `false` in case the path does not exist, we end up with the path always being treated as a file in case of a bare repository. As such, we can just check the bare-repository case in all callers and then pass in `GIT_DIR_FLAG_FALSE` ourselves, avoiding the need to `stat`. While this may not always be correct, it at least is no different from our current behavior.
5cb6a2c9	2017-10-29T12:28:43	Ignore trailing whitespace in .gitignore files (as git itself does)
2d9ff8f5	2017-07-10T09:36:19	ignore: honor case insensitivity for negative ignores When computing negative ignores, we throw away any rule which does not undo a previous rule to optimize. But on case insensitive file systems, we need to keep in mind that a negative ignore can also undo a previous rule with different case, which we did not yet honor while determining whether a rule undoes a previous one. So in the following example, we fail to unignore the "/Case" directory: /case !/Case Make both paths checking whether a plain- or wildcard-based rule undo a previous rule aware of case-insensitivity. This fixes the described issue.
b8922fc8	2017-07-07T13:27:27	ignore: keep negative rules containing wildcards Ignore rules allow for reverting a previously ignored rule by prefixing it with an exclamation mark. As such, a negative rule can only override previously ignored files. While computing all ignore patterns, we try to use this fact to optimize away some negative rules which do not override any previous patterns, as they won't change the outcome anyway. In some cases, though, this optimization causes us to get the actual ignores wrong for some files. This may happen whenever the pattern contains a wildcard, as we are unable to reason about whether a pattern overrides a previous pattern in a sane way. This happens for example in the case where a gitignore file contains ".c" and "!src/.c", where we wouldn't un-ignore files inside of the "src/" subdirectory. In this case, the first solution coming to mind may be to just strip the "src/" prefix and simply compare the basenames. While that would work here, it would stop working as soon as the basename pattern itself is different, like for example with "x.c" and "!src/.c. As such, we settle for the easier fix of just not optimizing away rules that contain a wildcard.
4467543e	2017-07-07T12:27:43	ignore: return early to avoid useless indentation
9bd83622	2017-07-07T12:27:18	ignore: fix indentation of comment block
0c7f49dd	2017-06-30T13:39:01	Make sure to always include "common.h" first Next to including several files, our "common.h" header also declares various macros which are then used throughout the project. As such, we have to make sure to always include this file first in all implementation files. Otherwise, we might encounter problems or even silent behavioural differences due to macros or defines not being defined as they should be. So in fact, our header and implementation files should make sure to always include "common.h" first. This commit does so by establishing a common include pattern. Header files inside of "src" will now always include "common.h" as its first other file, separated by a newline from all the other includes to make it stand out as special. There are two cases for the implementation files. If they do have a matching header file, they will always include this one first, leading to "common.h" being transitively included as first file. If they do not have a matching header file, they instead include "common.h" as first file themselves. This fixes the outlined problems and will become our standard practice for header and source files inside of the "src/" from now on.
2480d0eb	2017-06-30T13:34:05	Add missing license headers Some implementation files were missing the license headers. This commit adds them.
c5f3da96	2016-11-11T14:36:43	repository: use `git_repository_item_path` The recent introduction of the commondir variable of a repository requires callers to distinguish whether their files are part of the dot-git directory or the common directory shared between multpile worktrees. In order to take the burden from callers and unify knowledge on which files reside where, the `git_repository_item_path` function has been introduced which encapsulate this knowledge. Modify most existing callers of `git_repository_path` to use `git_repository_item_path` instead, thus making them implicitly aware of the common directory.
8a349bf2	2016-12-26T14:47:55	ignore: there must be a repository Otherwise we'll NULL-dereference in git_attr_cache__init
909d5494	2016-12-29T12:25:15	giterr_set: consistent error messages Error messages should be sentence fragments, and therefore: 1. Should not begin with a capital letter, 2. Should not conclude with punctuation, and 3. Should not end a sentence and begin a new one
fcb2c1c8	2016-08-12T09:06:15	ignore: allow unignoring basenames in subdirectories The .gitignore file allows for patterns which unignore previous ignore patterns. When unignoring a previous pattern, there are basically three cases how this is matched when no globbing is used: 1. when a previous file has been ignored, it can be unignored by using its exact name, e.g. foo/bar !foo/bar 2. when a file in a subdirectory has been ignored, it can be unignored by using its basename, e.g. foo/bar !bar 3. when all files with a basename are ignored, a specific file can be unignored again by specifying its path in a subdirectory, e.g. bar !foo/bar The first problem in libgit2 is that we did not correctly treat the second case. While we verified that the negative pattern matches the tail of the positive one, we did not verify if it only matches the basename of the positive pattern. So e.g. we would have also negated a pattern like foo/fruz_bar !bar Furthermore, we did not check for the third case, where a basename is being unignored in a certain subdirectory again. Both issues are fixed with this commit.
d364dc8b	2016-04-01T14:33:42	ignore: don't use realpath to canonicalize path If we're looking for a symlink, realpath will give us the resolved path, which is not what we're after, but a canonicalized version of the path the user asked for.
657afd35	2015-09-13T06:18:49	ignore: add test and adjust style and comment for dir with wildmatch The previous commit left the comment referencing the earlier state of the code, change it to explain the current logic. While here, change the logic to avoid repeating the copy of the base pattern.
6d0defe3	2015-08-24T18:47:48	Fix 'If we're dealing with a directory' check
2c57114f	2015-05-20T21:18:25	ignore: clear the error when matching a pattern negation When we discover that we want to keep a negative rule, make sure to clear the error variable, as it we otherwise return whatever was left by the previous loop iteration.
4c09e19a	2015-03-30T14:07:44	Improvements to ignore performance on Windows. Minimizing the number directory and file opens, minimizes the amount of IO thus reducing the overall cost of performing ignore operations.
4f358603	2015-03-24T16:33:50	ignore: fix negative ignores without wildcards.
9f779aac	2015-01-29T14:40:55	attrcache: don't re-read attrs during checkout During checkout, assume that the .gitattributes files aren't modified during the checkout. Instead, create an "attribute session" during checkout. Assume that attribute data read in the same checkout "session" hasn't been modified since the checkout started. (But allow subsequent checkouts to invalidate the cache.) Further, cache nonexistent git_attr_file data even when .gitattributes files are not found to prevent re-scanning for nonexistent files.
e05b2ff1	2014-12-05T18:25:38	ignore: match git's rule negation rules A rule can only negate something which was explicitly mentioned in the rules before it. Change our parsing to ignore a negative rule which does not negate something mentioned in the rules above it. While here, fix a wrong allocator usage. The memory for the match string comes from pool allocator. We must not free it with the general allocator. We can instead simply forget the string and it will be cleaned up.
bbb988a5	2014-09-17T14:52:31	path: Fix `git_path_walk_up` to work with non-rooted paths
f554611a	2014-05-06T12:41:26	Improve checks for ignore containment The diff code was using an "ignored_prefix" directory to track if a parent directory was ignored that contained untracked files alongside tracked files. Unfortunately, when negative ignore rules were used for directories inside ignored parents, the wrong rules were applied to untracked files inside the negatively ignored child directories. This commit moves the logic for ignore containment into the workdir iterator (which is a better place for it), so the ignored-ness of a directory is contained in the frame stack during traversal. This allows a child directory to override with a negative ignore and yet still restore the ignored state of the parent when we traverse out of the child. Along with this, there are some problems with "directory only" ignore rules on container directories. Given "a/*" and "!a/b/c/" (where the second rule is a directory rule but the first rule is just a generic prefix rule), then the directory only constraint was having "a/b/c/d/file" match the first rule and not the second. This was fixed by having ignore directory-only rules test a rule against the prefix of a file with LEADINGDIR enabled. Lastly, spot checks for ignores using `git_ignore_path_is_ignored` were tested from the top directory down to the bottom to deal with the containment problem, but this is wrong. We have to test bottom to top so that negative subdirectory rules will be checked before parent ignore rules. This does change the behavior of some existing tests, but it seems only to bring us more in line with core Git, so I think those changes are acceptable.
17ef678c	2014-04-21T11:55:57	Fix some coverity-found issues
6a0956e5	2014-04-18T10:32:35	Pop ignore only if whole relative path matches When traversing the directory structure, the iterator pushes and pops ignore files using a vector. Some directories don't have ignore files, so it uses a path comparison to decide when it is right to actually pop the last ignore file. This was only comparing directory suffixes, though, so a subdirectory with the same name as a parent could result in the parent's .gitignore being popped off the list ignores too early. This changes the logic to compare the entire relative path of the ignore file.
823c0e9c	2014-04-17T11:53:13	Fix broken logic for attr cache invalidation The checks to see if files were out of date in the attibute cache was wrong because the cache-breaker data wasn't getting stored correctly. Additionally, when the cache-breaker triggered, the old file data was being leaked.
e6e8530a	2014-04-14T12:31:17	Lock attribute file while reparsing data I don't love this approach, but achieving thread-safety for attribute and ignore data while reloading files would require a larger rewrite in order to avoid this. If an attribute or ignore file is out of date, this holds a lock on the file while we are reloading the data so that another thread won't try to reload the data at the same time.
2e9d813b	2014-04-11T12:12:47	Fix tests with new attr cache code
7d490872	2014-04-10T22:31:01	Attribute file cache refactor This is a big refactoring of the attribute file cache to be a bit simpler which in turn makes it easier to enforce a lock around any updates to the cache so that it can be used in a threaded env. Tons of changes to the attributes and ignores code.
cef170ab	2014-03-14T16:45:46	Fix leak when using push and pop with ignores The iterator pushes and pops ignores incrementally onto a list as it traverses the directory structure so that it doesn't have to constantly recheck which ignore files apply. With the new ref counting, it wasn't decrementing the refcount on the ignores that it removed from the vector.
b8777615	2014-03-14T15:37:42	Fix refcount issues with mutex protected ignores Some ignore files were not being freed from the cache.
a9528b8f	2014-04-14T15:59:48	Fix core.excludesfile named .gitignore Ignore rules with slashes in them are matched using FNM_PATHNAME and use the path to the .gitignore file from the root of the repository along with the path fragment (including slashes) in the ignore file itself. Unfortunately, the relative path to the .gitignore file was being applied to the global core.excludesfile if that was also named ".gitignore". This fixes that with more precise matching and includes test for ignore rules with leading slashes (which were the primary example of this being broken in the real world). This also backports an improvement to the file context logic from the threadsafe-iterators branch where we don't rely on mutating the key of the attribute file name to generate the context path.
8f7bc646	2014-04-10T16:33:39	Fix bug popping ignore files during wd iteration There were a couple bugs in popping ignore files during iteration that could result in incorrect decisions be made and thus ignore files below the root either not being loaded correctly or not being popped at the right time. One bug was an off-by-one in comparing the path of the gitignore file with the path being exited during iteration. The second bug was not correctly truncating the path being tracked during traversal if there were no ignores on the list (i.e. when you have no .gitignore at the root, but do have some in contained directories).
25e0b157	2013-12-06T15:07:57	Remove converting user error to GIT_EUSER This changes the behavior of callbacks so that the callback error code is not converted into GIT_EUSER and instead we propagate the return value through to the caller. Instead of using the giterr_capture and giterr_restore functions, we now rely on all functions to pass back the return value from a callback. To avoid having a return value with no error message, the user can call the public giterr_set_str or some such function to set an error message. There is a new helper 'giterr_set_callback' that functions can invoke after making a callback which ensures that some error message was set in case the callback did not set one. In places where the sign of the callback return value is meaningful (e.g. positive to skip, negative to abort), only the negative values are returned back to the caller, obviously, since the other values allow for continuing the loop. The hardest parts of this were in the checkout code where positive return values were overloaded as meaningful values for checkout. I fixed this by adding an output parameter to many of the internal checkout functions and removing the overload. This added some code, but it is probably a better implementation. There is some funkiness in the network code where user provided callbacks could be returning a positive or a negative value and we want to rely on that to cancel the loop. There are still a couple places where an user error might get turned into GIT_EUSER there, I think, though none exercised by the tests.
dab89f9b	2013-12-04T21:22:57	Further EUSER and error propagation fixes This continues auditing all the places where GIT_EUSER is being returned and making sure to clear any existing error using the new giterr_user_cancel helper. As a result, places that relied on intercepting GIT_EUSER but having the old error preserved also needed to be cleaned up to correctly stash and then retrieve the actual error. Additionally, as I encountered places where error codes were not being propagated correctly, I tried to fix them up. A number of those fixes are included in the this commit as well.
157cef10	2013-10-28T12:57:15	The "common.h" should be included before "config.h". When building libgit2 for ia32 architecture on a x64 machine, including "config.h" without a "common.h" would result the following error: C:\Program Files\Microsoft SDKs\Windows\v7.1\include\winbase.h(2288): error C2373: 'InterlockedIncrement' : redefinition; different type modifiers [C:\cygwin\home\zcbenz\codes\git-utils\build\libgit2.vcxproj] C:\Program Files\Microsoft SDKs\Windows\v7.1\include\winbase.h(2295): error C2373: 'InterlockedDecrement' : redefinition; different type modifiers [C:\cygwin\home\zcbenz\codes\git-utils\build\libgit2.vcxproj] C:\Program Files\Microsoft SDKs\Windows\v7.1\include\winbase.h(2303): error C2373: 'InterlockedExchange' : redefinition; different type modifiers [C:\cygwin\home\zcbenz\codes\git-utils\build\libgit2.vcxproj] C:\Program Files\Microsoft SDKs\Windows\v7.1\include\winbase.h(2314): error C2373: 'InterlockedExchangeAdd' : redefinition; different type modifiers [C:\cygwin\home\zcbenz\codes\git-utils\build\libgit2.vcxproj]
3bc3ed80	2013-08-09T10:06:23	Improve and comment git_ignore__pop_dir This just cleans up the improved logic for popping ignore dirs and documents why the complex behavior is needed.
ba8b8c04	2013-08-07T09:17:20	Improve building ignore file lists The routines to push and pop ignore files while traversing a directory had some issues. In particular, setting up the initial list would sometimes push an ignore file before it ought to be applied if the starting path was a directory containing an ignore file. Also, the pop function was not always matching the right part of the path and would fail to pop ignores from the list in some cases. This adds some tests that exercise a particular problematic case and then fixes the problems that I could find related to this. At some point, I'd like to isolate this ignore rule management code and rewrite it, but that's a larger project and right now, I'll opt to just try to fix the broken behaviors.
4ba64794	2013-08-09T10:52:35	Revert PR #1462 and provide alternative fix This rolls back the changes to fnmatch parsing from commit 2e40a60e847d6c128af23e24ea7a8efebd2427da except for the tests that were added. Instead this adds couple of new flags that can be passed in when attempting to parse an fnmatch pattern. Also, this changes the pathspec match logic to special case matching a filename with a '!' prefix against a negative pattern. This fixes the build.
33d532dc	2013-08-09T09:32:06	Merge pull request #1462 from yorah/fix/libgit2sharp-issue-379 status: fix handling of filenames with special prefixes
85b8b18b	2013-06-19T15:22:48	Add fn to check pathspec for ignored files Command line Git sometimes generates an error message if given a pathspec that contains an exact match to an ignored file (provided --force isn't also given). This adds an internal function that makes it easy to check it that has happened. Right now, I'm not creating a public API for this because that would get a little more complicated with a need for callbacks for all invalid paths.
eac76c23	2013-04-22T14:27:36	Use config cache where possible This converts many of the config lookups that are done around the library to use the repository config cache. This was everything I could find that wasn't part of diff (which requires a larger fix).
2e40a60e	2013-04-11T17:29:05	status: fix handling of filenames with special prefixes Fix libgit2/libgit2sharp#379
5540d947	2013-03-15T16:39:00	Implement global/system file search paths The goal of this work is to expose the search logic for "global", "system", and "xdg" files through the git_libgit2_opts() interface. Behind the scenes, I changed the logic for finding files to have a notion of a git_strarray that represents a search path and to store a separate search path for each of the three tiers of config file. For each tier, I implemented a function to initialize it to default values (generally based on environment variables), and then general interfaces to get it, set it, reset it, and prepend new directories to it. Next, I exposed these interfaces through the git_libgit2_opts interface, reusing the GIT_CONFIG_LEVEL_SYSTEM, etc., constants for the user to control which search path they were modifying. There are alternative designs for the opts interface / argument ordering, so I'm putting this phase out for discussion. Additionally, I ended up doing a little bit of clean up regarding attr.h and attr_file.h, adding a new attrcache.h so the other two files wouldn't have to be included in so many places.
02df42dd	2012-11-19T16:33:30	Set up default internal ignores This adds "." ".." and ".git" to the internal ignores list by default - asking about paths with these files will always say that they are ignored.
52032ae5	2012-10-15T12:48:43	Fix single-file ignore checks To answer if a single given file should be ignored, the path to that file has to be processed progressively checking that there are no intermediate ignored directories in getting to the file in question. This enables that, fixing the broken old behavior, and adds tests to exercise various ignore situations.
edb456c3	2012-10-08T16:32:43	Fix a bug where ignorecase wasn't applied to ignores
ec40b7f9	2012-09-17T15:42:41	Support for core.ignorecase
11684104	2012-08-24T13:41:45	Fix crash with adding internal ignores Depending on what you had done before adding new items to the internal ignores list, it was possible for the cache of ignore data to be uninitialized.
2fb4e9b3	2012-08-22T11:42:00	Wrap up ignore API and add tests This fills out the ignore API and adds tests.
f004c4a8	2012-08-21T17:26:39	Add public API for internal ignores This creates a public API for adding to the internal ignores list, which already existing but was not accessible. This adds the new default value for core.excludesfile also.
b8457baa	2012-07-24T07:57:58	portability: Improve x86/amd64 compatibility
9939e602	2012-06-11T09:24:02	Ignores allow unescapes internal whitespace
904b67e6	2012-05-18T01:48:50	errors: Rename error codes
e172cf08	2012-05-18T01:21:06	errors: Rename the generic return codes
b709e951	2012-05-04T11:06:12	Fix memory leaks and use after free
f917481e	2012-05-03T16:37:25	Support reading attributes from index Depending on the operation, we need to consider gitattributes in both the work dir and the index. This adds a parameter to all of the gitattributes related functions that allows user control of attribute reading behavior (i.e. prefer workdir, prefer index, only use index). This fix also covers allowing us to check attributes (and hence do diff and status) on bare repositories. This was a somewhat larger change that I hoped because it had to change the cache key used for gitattributes files.
d58336dd	2012-04-26T10:51:45	Fix leading slash behavior in attrs/ignores We were not following the git behavior for leading slashes in path names when matching git ignores and git attribute file patterns. This should fix issue #638.
19fa2bc1	2012-04-17T15:12:50	Convert attrs and diffs to use string pools This converts the git attr related code (including ignores) and the git diff related code (and implicitly the status code) to use `git_pools` for storing strings. This reduces the number of small blocks allocated dramatically.
95dfb031	2012-03-30T14:40:50	Improve config handling for diff,submodules,attrs This adds support for a bunch of core.* settings that affect diff and status, plus fixes up some incorrect implementations of those settings from before. Also, this cleans up the handling of config settings in the new submodules code and in the old attrs/ignore code.
0d0fa7c3	2012-03-16T15:56:01	Convert attr, ignore, mwindow, status to new errors Also cleaned up some previously converted code that still had little things to polish.
ab43ad2f	2012-03-14T11:07:14	Convert attr and other files to new errors This continues to add other files to the new error handling style. I think the only real concerns here are that there are a couple of error return cases that I have converted to asserts, but I think that it was the correct thing to do given the new error style.
13224ea4	2012-02-27T04:28:31	buffer: Unify `git_fbuffer` and `git_buf` This makes so much sense that I can't believe it hasn't been done before. Kill the old `git_fbuffer` and read files straight into `git_buf` objects. Also: In order to fully support 4GB files in 32-bit systems, the `git_buf` implementation has been changed from using `ssize_t` for storage and storing negative values on allocation failure, to using `size_t` and changing the buffer pointer to a magical pointer on allocation failure. Hopefully this won't break anything.
0534641d	2012-02-22T15:15:35	Fix iterators based on pull request feedback This update addresses all of the feedback in pull request #570. The biggest change was to create actual linked list stacks for storing the tree and workdir iterator state. This cleaned up the code a ton. Additionally, all of the static functions had their 'git_' prefix removed, and a lot of other unnecessary changes were removed from the original patch.
b6c93aef	2012-02-21T14:46:24	Uniform iterators for trees, index, and workdir This create a new git_iterator type of object that provides a uniform interface for iterating over the index, an arbitrary tree, or the working directory of a repository. As part of this, git ignore support was extended to support push and pop of directory-based ignore files as the working directory is being traversed (so the array of ignores does not have to be recreated at each directory during traveral). There are a number of other small utility functions in buffer, path, vector, and fileops that are included in this patch that made the iterator implementation cleaner.
adc9bdb3	2012-01-31T13:59:32	Fix attr path is_dir check When building an attr path object, the code that checks if the file is a directory was evaluating the file as a relative path to the current working directory, instead of using the repo root. This lead to inconsistent behavior.
63ab73be	2012-01-20T11:13:17	Merge branch 'fix-subdir-attr-paths' into development This resolves issue #535 and issue #533.
1744fafe	2012-01-17T15:49:47	Move path related functions from fileops to path This takes all of the functions that look up simple data about paths (such as `git_futils_isdir`) and moves them over to path.h (becoming `git_path_isdir`). This leaves fileops.h just with functions that actually manipulate the filesystem or look at the file contents in some way. As part of this, the dir.h header which is really just for win32 support was moved into win32 (with some minor changes).
a51cd8e6	2012-01-16T16:58:27	Fix handling of relative paths for attrs Per issue #533, the handling of relative paths in attribute and ignore files was not right. Fixed this by pre-joining the relative path of the attribute/ignore file onto the match string when a full path match is required. Unfortunately, fixing this required a bit more code than I would have liked because I had to juggle things around so that the fnmatch parser would have sufficient information to prepend the relative path when it was needed.
cfbc880d	2012-01-16T15:16:44	Patch cleanup for merge After reviewing the gitignore support with Vicent, we came up with a list of minor cleanups to prepare for merge, including: * checking git_repository_config error returns * renaming git_ignore_is_ignored and moving to status.h * fixing next_line skipping to include \r skips * commenting on where ignores are and are not included
1dbcc9fc	2012-01-11T21:07:16	Fix several memory issues This contains fixes for several issues discovered by MSVC and by valgrind, including some bad data access, some memory leakage (in where certain files were not being successfully added to the cache), and some code simplification.
0cfcff5d	2012-01-11T20:41:55	Convert git_path_walk_up to regular function This gets rid of the crazy macro version of git_path_walk_up and makes it into a normal function that takes a callback parameter. This turned out not to be too messy.
6a67a812	2012-01-11T16:01:48	Allow ignores (and attribs) for nonexistent files This fixes issue 532 that attributes (and gitignores) could not be checked for files that don't exist. It should be possible to query such things regardless of the existence of the file.
df743c7d	2012-01-09T15:37:19	Initial implementation of gitignore support Adds support for .gitignore files to git_status_foreach() and git_status_file(). This includes refactoring the gitattributes code to share logic where possible. The GIT_STATUS_IGNORED flag will now be passed in for files that are ignored (provided they are not already in the index or the head of repo).

3be73011

2018-06-11T18:26:22

Merge pull request #4436 from pks-t/pks/packfile-stream-free pack: rename `git_packfile_stream_free`

ecf4f33a

2018-02-08T11:14:48

Convert usage of `git_buf_free` to new `git_buf_dispose`

d22fd81c

2018-06-05T16:46:07

ignore: remove now-useless check for LEADINGDIR When checking whether a rule negates another rule, we were checking whether a rule had the `GIT_ATTR_FNMATCH_LEADINGDIR` flag set and, if so, added a "/*" to its end before passing it to `fnmatch`. Our code now sets `GIT_ATTR_FNMATCH_NOLEADINGDIR`, thus the `LEADINGDIR` flag shall never be set. Furthermore, due to the `NOLEADINGDIR` flag, trailing globs do not get consumed by our ignore parser anymore. Clean up code by just dropping this now useless logic.

20b4c175

2018-06-05T16:12:58

ignore: fix negative leading directory rules unignoring subdirectory files When computing whether a file is ignored, we simply search for the first matching rule and return whether it is a positive ignore rule (the file is really ignored) or whether it is a negative ignore rule (the file is being unignored). Each rule has a set of flags which are being passed to `fnmatch`, depending on what kind of rule it is. E.g. in case it is a negative ignore we add a flag `GIT_ATTR_FNMATCH_NEGATIVE`, in case it contains a glob we set the `GIT_ATTR_FNMATCH_HASGLOB` flag. One of these flags is the `GIT_ATTR_FNMATCH_LEADINGDIR` flag, which is always set in case the pattern has a trailing "/*" or in case the pattern is negative. The flag causes the `fnmatch` function to return a match in case a string is a leading directory of another, e.g. "dir/" matches "dir/foo/bar.c". In case of negative patterns, this is wrong in certain cases. Take the following simple example of a gitignore: dir/ !dir/ The `LEADINGDIR` flag causes "!dir/" to match "dir/foo/bar.c", and we correctly unignore the directory. But take this example: *.test !dir/* We expect everything in "dir/" to be unignored, but e.g. a file in a subdirectory of dir should be ignored, as the "*" does not cross directory hierarchies. With `LEADINGDIR`, though, we would just see that "dir/" matches and return that the file is unignored, even if it is contained in a subdirectory. Instead, we want to ignore leading directories here and check "*.test". Afterwards, we have to iterate up to the parent directory and do the same checks. To fix the issue, disallow matching against leading directories in gitignore files. This can be trivially done by just adding the `GIT_ATTR_FNMATCH_NOLEADINGDIR` to the spec passed to `git_attr_fnmatch__parse`. Due to a bug in that function, though, this flag is being ignored for negative patterns, which is fixed in this commit, as well. As a last fix, we need to ignore rules that are supposed to match a directory when our path itself is a file. All together, these changes fix the described error case.

251d8771

2018-04-06T12:24:10

attr_file: fix handling of directory patterns with trailing spaces When comparing whether a path matches a directory rule, we pass the both the path and directory name to `fnmatch` with `GIT_ATTR_FNMATCH_DIRECTORY` being set. `fnmatch` expects the pattern to contain no trailing directory '/', which is why we try to always strip patterns of trailing slashes. We do not handle that case correctly though when the pattern itself has trailing spaces, causing the match to fail. Fix the issue by stripping trailing spaces and tabs for a rule previous to checking whether the pattern is a directory pattern with a trailing '/'. This replaces the whitespace-stripping in our ignore file parsing code, which was stripping whitespaces too late. Add a test to catch future breakage.

a33deeb4

2018-02-28T12:20:23

win32: strncmp -> git__strncmp The win32 C library is compiled cdecl, however when configured with `STDCALL=ON`, our functions (and function pointers) will use the stdcall calling convention. You cannot set a `__stdcall` function pointer to a `__cdecl` function, so it's easier to just use our `git__strncmp` instead of sorting that mess out.

e28e17e6

2018-02-01T10:36:33

attr: avoid stat'ting files for bare repositories Depending on whether the path we want to look up an attribute for is a file or a directory, the fnmatch function will be called with different flags. Because of this, we have to first stat(3) the path to determine whether it is a file or directory in `git_attr_path__init`. This is wasteful though in bare repositories, where we can already be assured that the path will never exist at all due to there being no worktree. In this case, we will execute an unnecessary syscall, which might be noticeable on networked file systems. What happens right now is that we always pass the `GIT_DIR_FLAG_UNKOWN` flag to `git_attr_path__init`, which causes it to `stat` the file itself to determine its type. As it is calling `git_path_isdir` on the path, which will always return `false` in case the path does not exist, we end up with the path always being treated as a file in case of a bare repository. As such, we can just check the bare-repository case in all callers and then pass in `GIT_DIR_FLAG_FALSE` ourselves, avoiding the need to `stat`. While this may not always be correct, it at least is no different from our current behavior.

5cb6a2c9

2017-10-29T12:28:43

Ignore trailing whitespace in .gitignore files (as git itself does)

2d9ff8f5

2017-07-10T09:36:19

ignore: honor case insensitivity for negative ignores When computing negative ignores, we throw away any rule which does not undo a previous rule to optimize. But on case insensitive file systems, we need to keep in mind that a negative ignore can also undo a previous rule with different case, which we did not yet honor while determining whether a rule undoes a previous one. So in the following example, we fail to unignore the "/Case" directory: /case !/Case Make both paths checking whether a plain- or wildcard-based rule undo a previous rule aware of case-insensitivity. This fixes the described issue.

b8922fc8

2017-07-07T13:27:27

ignore: keep negative rules containing wildcards Ignore rules allow for reverting a previously ignored rule by prefixing it with an exclamation mark. As such, a negative rule can only override previously ignored files. While computing all ignore patterns, we try to use this fact to optimize away some negative rules which do not override any previous patterns, as they won't change the outcome anyway. In some cases, though, this optimization causes us to get the actual ignores wrong for some files. This may happen whenever the pattern contains a wildcard, as we are unable to reason about whether a pattern overrides a previous pattern in a sane way. This happens for example in the case where a gitignore file contains "*.c" and "!src/*.c", where we wouldn't un-ignore files inside of the "src/" subdirectory. In this case, the first solution coming to mind may be to just strip the "src/" prefix and simply compare the basenames. While that would work here, it would stop working as soon as the basename pattern itself is different, like for example with "*x.c" and "!src/*.c. As such, we settle for the easier fix of just not optimizing away rules that contain a wildcard.

4467543e

2017-07-07T12:27:43

ignore: return early to avoid useless indentation

9bd83622

2017-07-07T12:27:18

ignore: fix indentation of comment block

0c7f49dd

2017-06-30T13:39:01

Make sure to always include "common.h" first Next to including several files, our "common.h" header also declares various macros which are then used throughout the project. As such, we have to make sure to always include this file first in all implementation files. Otherwise, we might encounter problems or even silent behavioural differences due to macros or defines not being defined as they should be. So in fact, our header and implementation files should make sure to always include "common.h" first. This commit does so by establishing a common include pattern. Header files inside of "src" will now always include "common.h" as its first other file, separated by a newline from all the other includes to make it stand out as special. There are two cases for the implementation files. If they do have a matching header file, they will always include this one first, leading to "common.h" being transitively included as first file. If they do not have a matching header file, they instead include "common.h" as first file themselves. This fixes the outlined problems and will become our standard practice for header and source files inside of the "src/" from now on.

2480d0eb

2017-06-30T13:34:05

Add missing license headers Some implementation files were missing the license headers. This commit adds them.

c5f3da96

2016-11-11T14:36:43

repository: use `git_repository_item_path` The recent introduction of the commondir variable of a repository requires callers to distinguish whether their files are part of the dot-git directory or the common directory shared between multpile worktrees. In order to take the burden from callers and unify knowledge on which files reside where, the `git_repository_item_path` function has been introduced which encapsulate this knowledge. Modify most existing callers of `git_repository_path` to use `git_repository_item_path` instead, thus making them implicitly aware of the common directory.

8a349bf2

2016-12-26T14:47:55

ignore: there must be a repository Otherwise we'll NULL-dereference in git_attr_cache__init

909d5494

2016-12-29T12:25:15

giterr_set: consistent error messages Error messages should be sentence fragments, and therefore: 1. Should not begin with a capital letter, 2. Should not conclude with punctuation, and 3. Should not end a sentence and begin a new one

fcb2c1c8

2016-08-12T09:06:15

ignore: allow unignoring basenames in subdirectories The .gitignore file allows for patterns which unignore previous ignore patterns. When unignoring a previous pattern, there are basically three cases how this is matched when no globbing is used: 1. when a previous file has been ignored, it can be unignored by using its exact name, e.g. foo/bar !foo/bar 2. when a file in a subdirectory has been ignored, it can be unignored by using its basename, e.g. foo/bar !bar 3. when all files with a basename are ignored, a specific file can be unignored again by specifying its path in a subdirectory, e.g. bar !foo/bar The first problem in libgit2 is that we did not correctly treat the second case. While we verified that the negative pattern matches the tail of the positive one, we did not verify if it only matches the basename of the positive pattern. So e.g. we would have also negated a pattern like foo/fruz_bar !bar Furthermore, we did not check for the third case, where a basename is being unignored in a certain subdirectory again. Both issues are fixed with this commit.

d364dc8b

2016-04-01T14:33:42

ignore: don't use realpath to canonicalize path If we're looking for a symlink, realpath will give us the resolved path, which is not what we're after, but a canonicalized version of the path the user asked for.

657afd35

2015-09-13T06:18:49

ignore: add test and adjust style and comment for dir with wildmatch The previous commit left the comment referencing the earlier state of the code, change it to explain the current logic. While here, change the logic to avoid repeating the copy of the base pattern.

6d0defe3

2015-08-24T18:47:48

Fix 'If we're dealing with a directory' check

2c57114f

2015-05-20T21:18:25

ignore: clear the error when matching a pattern negation When we discover that we want to keep a negative rule, make sure to clear the error variable, as it we otherwise return whatever was left by the previous loop iteration.

4c09e19a

2015-03-30T14:07:44

Improvements to ignore performance on Windows. Minimizing the number directory and file opens, minimizes the amount of IO thus reducing the overall cost of performing ignore operations.

4f358603

2015-03-24T16:33:50

ignore: fix negative ignores without wildcards.

9f779aac

2015-01-29T14:40:55

attrcache: don't re-read attrs during checkout During checkout, assume that the .gitattributes files aren't modified during the checkout. Instead, create an "attribute session" during checkout. Assume that attribute data read in the same checkout "session" hasn't been modified since the checkout started. (But allow subsequent checkouts to invalidate the cache.) Further, cache nonexistent git_attr_file data even when .gitattributes files are not found to prevent re-scanning for nonexistent files.

e05b2ff1

2014-12-05T18:25:38

ignore: match git's rule negation rules A rule can only negate something which was explicitly mentioned in the rules before it. Change our parsing to ignore a negative rule which does not negate something mentioned in the rules above it. While here, fix a wrong allocator usage. The memory for the match string comes from pool allocator. We must not free it with the general allocator. We can instead simply forget the string and it will be cleaned up.

bbb988a5

2014-09-17T14:52:31

path: Fix `git_path_walk_up` to work with non-rooted paths

f554611a

2014-05-06T12:41:26

Improve checks for ignore containment The diff code was using an "ignored_prefix" directory to track if a parent directory was ignored that contained untracked files alongside tracked files. Unfortunately, when negative ignore rules were used for directories inside ignored parents, the wrong rules were applied to untracked files inside the negatively ignored child directories. This commit moves the logic for ignore containment into the workdir iterator (which is a better place for it), so the ignored-ness of a directory is contained in the frame stack during traversal. This allows a child directory to override with a negative ignore and yet still restore the ignored state of the parent when we traverse out of the child. Along with this, there are some problems with "directory only" ignore rules on container directories. Given "a/*" and "!a/b/c/" (where the second rule is a directory rule but the first rule is just a generic prefix rule), then the directory only constraint was having "a/b/c/d/file" match the first rule and not the second. This was fixed by having ignore directory-only rules test a rule against the prefix of a file with LEADINGDIR enabled. Lastly, spot checks for ignores using `git_ignore_path_is_ignored` were tested from the top directory down to the bottom to deal with the containment problem, but this is wrong. We have to test bottom to top so that negative subdirectory rules will be checked before parent ignore rules. This does change the behavior of some existing tests, but it seems only to bring us more in line with core Git, so I think those changes are acceptable.

17ef678c

2014-04-21T11:55:57

Fix some coverity-found issues

6a0956e5

2014-04-18T10:32:35

Pop ignore only if whole relative path matches When traversing the directory structure, the iterator pushes and pops ignore files using a vector. Some directories don't have ignore files, so it uses a path comparison to decide when it is right to actually pop the last ignore file. This was only comparing directory suffixes, though, so a subdirectory with the same name as a parent could result in the parent's .gitignore being popped off the list ignores too early. This changes the logic to compare the entire relative path of the ignore file.

823c0e9c

2014-04-17T11:53:13

Fix broken logic for attr cache invalidation The checks to see if files were out of date in the attibute cache was wrong because the cache-breaker data wasn't getting stored correctly. Additionally, when the cache-breaker triggered, the old file data was being leaked.

e6e8530a

2014-04-14T12:31:17

Lock attribute file while reparsing data I don't love this approach, but achieving thread-safety for attribute and ignore data while reloading files would require a larger rewrite in order to avoid this. If an attribute or ignore file is out of date, this holds a lock on the file while we are reloading the data so that another thread won't try to reload the data at the same time.

2e9d813b

2014-04-11T12:12:47

Fix tests with new attr cache code

7d490872

2014-04-10T22:31:01

Attribute file cache refactor This is a big refactoring of the attribute file cache to be a bit simpler which in turn makes it easier to enforce a lock around any updates to the cache so that it can be used in a threaded env. Tons of changes to the attributes and ignores code.

cef170ab

2014-03-14T16:45:46

Fix leak when using push and pop with ignores The iterator pushes and pops ignores incrementally onto a list as it traverses the directory structure so that it doesn't have to constantly recheck which ignore files apply. With the new ref counting, it wasn't decrementing the refcount on the ignores that it removed from the vector.

b8777615

2014-03-14T15:37:42

Fix refcount issues with mutex protected ignores Some ignore files were not being freed from the cache.

a9528b8f

2014-04-14T15:59:48

Fix core.excludesfile named .gitignore Ignore rules with slashes in them are matched using FNM_PATHNAME and use the path to the .gitignore file from the root of the repository along with the path fragment (including slashes) in the ignore file itself. Unfortunately, the relative path to the .gitignore file was being applied to the global core.excludesfile if that was also named ".gitignore". This fixes that with more precise matching and includes test for ignore rules with leading slashes (which were the primary example of this being broken in the real world). This also backports an improvement to the file context logic from the threadsafe-iterators branch where we don't rely on mutating the key of the attribute file name to generate the context path.

8f7bc646

2014-04-10T16:33:39

Fix bug popping ignore files during wd iteration There were a couple bugs in popping ignore files during iteration that could result in incorrect decisions be made and thus ignore files below the root either not being loaded correctly or not being popped at the right time. One bug was an off-by-one in comparing the path of the gitignore file with the path being exited during iteration. The second bug was not correctly truncating the path being tracked during traversal if there were no ignores on the list (i.e. when you have no .gitignore at the root, but do have some in contained directories).

25e0b157

2013-12-06T15:07:57

Remove converting user error to GIT_EUSER This changes the behavior of callbacks so that the callback error code is not converted into GIT_EUSER and instead we propagate the return value through to the caller. Instead of using the giterr_capture and giterr_restore functions, we now rely on all functions to pass back the return value from a callback. To avoid having a return value with no error message, the user can call the public giterr_set_str or some such function to set an error message. There is a new helper 'giterr_set_callback' that functions can invoke after making a callback which ensures that some error message was set in case the callback did not set one. In places where the sign of the callback return value is meaningful (e.g. positive to skip, negative to abort), only the negative values are returned back to the caller, obviously, since the other values allow for continuing the loop. The hardest parts of this were in the checkout code where positive return values were overloaded as meaningful values for checkout. I fixed this by adding an output parameter to many of the internal checkout functions and removing the overload. This added some code, but it is probably a better implementation. There is some funkiness in the network code where user provided callbacks could be returning a positive or a negative value and we want to rely on that to cancel the loop. There are still a couple places where an user error might get turned into GIT_EUSER there, I think, though none exercised by the tests.

dab89f9b

2013-12-04T21:22:57

Further EUSER and error propagation fixes This continues auditing all the places where GIT_EUSER is being returned and making sure to clear any existing error using the new giterr_user_cancel helper. As a result, places that relied on intercepting GIT_EUSER but having the old error preserved also needed to be cleaned up to correctly stash and then retrieve the actual error. Additionally, as I encountered places where error codes were not being propagated correctly, I tried to fix them up. A number of those fixes are included in the this commit as well.

157cef10

2013-10-28T12:57:15

The "common.h" should be included before "config.h". When building libgit2 for ia32 architecture on a x64 machine, including "config.h" without a "common.h" would result the following error: C:\Program Files\Microsoft SDKs\Windows\v7.1\include\winbase.h(2288): error C2373: 'InterlockedIncrement' : redefinition; different type modifiers [C:\cygwin\home\zcbenz\codes\git-utils\build\libgit2.vcxproj] C:\Program Files\Microsoft SDKs\Windows\v7.1\include\winbase.h(2295): error C2373: 'InterlockedDecrement' : redefinition; different type modifiers [C:\cygwin\home\zcbenz\codes\git-utils\build\libgit2.vcxproj] C:\Program Files\Microsoft SDKs\Windows\v7.1\include\winbase.h(2303): error C2373: 'InterlockedExchange' : redefinition; different type modifiers [C:\cygwin\home\zcbenz\codes\git-utils\build\libgit2.vcxproj] C:\Program Files\Microsoft SDKs\Windows\v7.1\include\winbase.h(2314): error C2373: 'InterlockedExchangeAdd' : redefinition; different type modifiers [C:\cygwin\home\zcbenz\codes\git-utils\build\libgit2.vcxproj]

3bc3ed80

2013-08-09T10:06:23

Improve and comment git_ignore__pop_dir This just cleans up the improved logic for popping ignore dirs and documents why the complex behavior is needed.

ba8b8c04

2013-08-07T09:17:20

Improve building ignore file lists The routines to push and pop ignore files while traversing a directory had some issues. In particular, setting up the initial list would sometimes push an ignore file before it ought to be applied if the starting path was a directory containing an ignore file. Also, the pop function was not always matching the right part of the path and would fail to pop ignores from the list in some cases. This adds some tests that exercise a particular problematic case and then fixes the problems that I could find related to this. At some point, I'd like to isolate this ignore rule management code and rewrite it, but that's a larger project and right now, I'll opt to just try to fix the broken behaviors.

4ba64794

2013-08-09T10:52:35

Revert PR #1462 and provide alternative fix This rolls back the changes to fnmatch parsing from commit 2e40a60e847d6c128af23e24ea7a8efebd2427da except for the tests that were added. Instead this adds couple of new flags that can be passed in when attempting to parse an fnmatch pattern. Also, this changes the pathspec match logic to special case matching a filename with a '!' prefix against a negative pattern. This fixes the build.

33d532dc

2013-08-09T09:32:06

Merge pull request #1462 from yorah/fix/libgit2sharp-issue-379 status: fix handling of filenames with special prefixes

85b8b18b

2013-06-19T15:22:48

Add fn to check pathspec for ignored files Command line Git sometimes generates an error message if given a pathspec that contains an exact match to an ignored file (provided --force isn't also given). This adds an internal function that makes it easy to check it that has happened. Right now, I'm not creating a public API for this because that would get a little more complicated with a need for callbacks for all invalid paths.

eac76c23

2013-04-22T14:27:36

Use config cache where possible This converts many of the config lookups that are done around the library to use the repository config cache. This was everything I could find that wasn't part of diff (which requires a larger fix).

2e40a60e

2013-04-11T17:29:05

status: fix handling of filenames with special prefixes Fix libgit2/libgit2sharp#379

5540d947

2013-03-15T16:39:00

Implement global/system file search paths The goal of this work is to expose the search logic for "global", "system", and "xdg" files through the git_libgit2_opts() interface. Behind the scenes, I changed the logic for finding files to have a notion of a git_strarray that represents a search path and to store a separate search path for each of the three tiers of config file. For each tier, I implemented a function to initialize it to default values (generally based on environment variables), and then general interfaces to get it, set it, reset it, and prepend new directories to it. Next, I exposed these interfaces through the git_libgit2_opts interface, reusing the GIT_CONFIG_LEVEL_SYSTEM, etc., constants for the user to control which search path they were modifying. There are alternative designs for the opts interface / argument ordering, so I'm putting this phase out for discussion. Additionally, I ended up doing a little bit of clean up regarding attr.h and attr_file.h, adding a new attrcache.h so the other two files wouldn't have to be included in so many places.

02df42dd

2012-11-19T16:33:30

Set up default internal ignores This adds "." ".." and ".git" to the internal ignores list by default - asking about paths with these files will always say that they are ignored.

52032ae5

2012-10-15T12:48:43

Fix single-file ignore checks To answer if a single given file should be ignored, the path to that file has to be processed progressively checking that there are no intermediate ignored directories in getting to the file in question. This enables that, fixing the broken old behavior, and adds tests to exercise various ignore situations.

edb456c3

2012-10-08T16:32:43

Fix a bug where ignorecase wasn't applied to ignores

ec40b7f9

2012-09-17T15:42:41

Support for core.ignorecase

11684104

2012-08-24T13:41:45

Fix crash with adding internal ignores Depending on what you had done before adding new items to the internal ignores list, it was possible for the cache of ignore data to be uninitialized.

2fb4e9b3

2012-08-22T11:42:00

Wrap up ignore API and add tests This fills out the ignore API and adds tests.

f004c4a8

2012-08-21T17:26:39

Add public API for internal ignores This creates a public API for adding to the internal ignores list, which already existing but was not accessible. This adds the new default value for core.excludesfile also.

b8457baa

2012-07-24T07:57:58

portability: Improve x86/amd64 compatibility

9939e602

2012-06-11T09:24:02

Ignores allow unescapes internal whitespace

904b67e6

2012-05-18T01:48:50

errors: Rename error codes

e172cf08

2012-05-18T01:21:06

errors: Rename the generic return codes

b709e951

2012-05-04T11:06:12

Fix memory leaks and use after free

f917481e

2012-05-03T16:37:25

Support reading attributes from index Depending on the operation, we need to consider gitattributes in both the work dir and the index. This adds a parameter to all of the gitattributes related functions that allows user control of attribute reading behavior (i.e. prefer workdir, prefer index, only use index). This fix also covers allowing us to check attributes (and hence do diff and status) on bare repositories. This was a somewhat larger change that I hoped because it had to change the cache key used for gitattributes files.

d58336dd

2012-04-26T10:51:45

Fix leading slash behavior in attrs/ignores We were not following the git behavior for leading slashes in path names when matching git ignores and git attribute file patterns. This should fix issue #638.

19fa2bc1

2012-04-17T15:12:50

Convert attrs and diffs to use string pools This converts the git attr related code (including ignores) and the git diff related code (and implicitly the status code) to use `git_pools` for storing strings. This reduces the number of small blocks allocated dramatically.

95dfb031

2012-03-30T14:40:50

Improve config handling for diff,submodules,attrs This adds support for a bunch of core.* settings that affect diff and status, plus fixes up some incorrect implementations of those settings from before. Also, this cleans up the handling of config settings in the new submodules code and in the old attrs/ignore code.

0d0fa7c3

2012-03-16T15:56:01

Convert attr, ignore, mwindow, status to new errors Also cleaned up some previously converted code that still had little things to polish.

ab43ad2f

2012-03-14T11:07:14

Convert attr and other files to new errors This continues to add other files to the new error handling style. I think the only real concerns here are that there are a couple of error return cases that I have converted to asserts, but I think that it was the correct thing to do given the new error style.

13224ea4

2012-02-27T04:28:31

buffer: Unify `git_fbuffer` and `git_buf` This makes so much sense that I can't believe it hasn't been done before. Kill the old `git_fbuffer` and read files straight into `git_buf` objects. Also: In order to fully support 4GB files in 32-bit systems, the `git_buf` implementation has been changed from using `ssize_t` for storage and storing negative values on allocation failure, to using `size_t` and changing the buffer pointer to a magical pointer on allocation failure. Hopefully this won't break anything.

0534641d

2012-02-22T15:15:35

Fix iterators based on pull request feedback This update addresses all of the feedback in pull request #570. The biggest change was to create actual linked list stacks for storing the tree and workdir iterator state. This cleaned up the code a ton. Additionally, all of the static functions had their 'git_' prefix removed, and a lot of other unnecessary changes were removed from the original patch.

b6c93aef

2012-02-21T14:46:24

Uniform iterators for trees, index, and workdir This create a new git_iterator type of object that provides a uniform interface for iterating over the index, an arbitrary tree, or the working directory of a repository. As part of this, git ignore support was extended to support push and pop of directory-based ignore files as the working directory is being traversed (so the array of ignores does not have to be recreated at each directory during traveral). There are a number of other small utility functions in buffer, path, vector, and fileops that are included in this patch that made the iterator implementation cleaner.

adc9bdb3

2012-01-31T13:59:32

Fix attr path is_dir check When building an attr path object, the code that checks if the file is a directory was evaluating the file as a relative path to the current working directory, instead of using the repo root. This lead to inconsistent behavior.

63ab73be

2012-01-20T11:13:17

Merge branch 'fix-subdir-attr-paths' into development This resolves issue #535 and issue #533.

1744fafe

2012-01-17T15:49:47

Move path related functions from fileops to path This takes all of the functions that look up simple data about paths (such as `git_futils_isdir`) and moves them over to path.h (becoming `git_path_isdir`). This leaves fileops.h just with functions that actually manipulate the filesystem or look at the file contents in some way. As part of this, the dir.h header which is really just for win32 support was moved into win32 (with some minor changes).

a51cd8e6

2012-01-16T16:58:27

Fix handling of relative paths for attrs Per issue #533, the handling of relative paths in attribute and ignore files was not right. Fixed this by pre-joining the relative path of the attribute/ignore file onto the match string when a full path match is required. Unfortunately, fixing this required a bit more code than I would have liked because I had to juggle things around so that the fnmatch parser would have sufficient information to prepend the relative path when it was needed.

cfbc880d

2012-01-16T15:16:44

Patch cleanup for merge After reviewing the gitignore support with Vicent, we came up with a list of minor cleanups to prepare for merge, including: * checking git_repository_config error returns * renaming git_ignore_is_ignored and moving to status.h * fixing next_line skipping to include \r skips * commenting on where ignores are and are not included

1dbcc9fc

2012-01-11T21:07:16

Fix several memory issues This contains fixes for several issues discovered by MSVC and by valgrind, including some bad data access, some memory leakage (in where certain files were not being successfully added to the cache), and some code simplification.

0cfcff5d

2012-01-11T20:41:55

Convert git_path_walk_up to regular function This gets rid of the crazy macro version of git_path_walk_up and makes it into a normal function that takes a callback parameter. This turned out not to be too messy.

6a67a812

2012-01-11T16:01:48

Allow ignores (and attribs) for nonexistent files This fixes issue 532 that attributes (and gitignores) could not be checked for files that don't exist. It should be possible to query such things regardless of the existence of the file.

df743c7d

2012-01-09T15:37:19

Initial implementation of gitignore support Adds support for .gitignore files to git_status_foreach() and git_status_file(). This includes refactoring the gitattributes code to share logic where possible. The GIT_STATUS_IGNORED flag will now be passed in for files that are ignored (provided they are not already in the index or the head of repo).

thodg/libgit2/src/ignore.c

src/ignore.c

Log