|
4d4c8e0a
|
2020-04-02T07:34:55
|
|
Re-adding the "delta offset is zero" error case
|
|
|
ba59a4a2
|
2020-04-01T12:34:16
|
|
Making get_delta_base() conform to the general error-handling pattern
This makes get_delta_base() return the error code as the return value
and the delta base as an out-parameter.
|
|
|
f3273725
|
2020-02-25T20:58:09
|
|
pack: Improve error handling for get_delta_base()
This change moves the responsibility of setting the error upon failures
of get_delta_base() to get_delta_base() instead of its callers. That
way, the caller chan always check if the return value is negative and
mark the whole operation as an error instead of using garbage values,
which can lead to crashes if the .pack files are malformed.
|
|
f0f1cd1d
|
2020-02-07T10:51:17
|
|
sha1_lookup: inline its only function into "pack.c"
The file "sha1_lookup.c" contains a single function `sha1_position`
only which is used only in the packfile implementation. As the function
is comparatively small, to enable the compiler to optimize better and to
remove symbol visibility, move it into "pack.c".
|
|
|
0edc26c8
|
2019-12-13T18:54:13
|
|
pack: refactor streams to use `git_zstream`
While we do have a `git_zstream` abstraction that encapsulates all the
calls to zlib as well as its error handling, we do not use it in our
pack file code. Refactor it to make the code a lot easier to understand.
|
|
|
d8f6fee3
|
2019-12-13T14:57:53
|
|
pack: refactor unpacking of raw objects to use `git_zstream`
While we do have a zstream abstraction that encapsulates all the calls
to zlib as well as its error handling, we do not use it in our pack file
code. Refactor it to make the code a lot easier to understand.
|
|
6460e8ab
|
2019-06-23T18:13:29
|
|
internal: use off64_t instead of git_off_t
Prefer `off64_t` internally.
|
|
|
e54343a4
|
2019-06-29T09:17:32
|
|
fileops: rename to "futils.h" to match function signatures
Our file utils functions all have a "futils" prefix, e.g.
`git_futils_touch`. One would thus naturally guess that their
definitions and implementation would live in files "futils.h" and
"futils.c", respectively, but in fact they live in "fileops.h".
Rename the files to match expectations.
|
|
|
b9d0b664
|
2018-12-17T09:10:53
|
|
offmap: introduce high-level setter for key/value pairs
Currently, there is only one caller that adds entries into an offset map, and
this caller first uses `git_offmap_put` to add a key and then set the value at
the returned index by using `git_offmap_set_value_at`. This is just too tighlty
coupled with implementation details of the map as it exposes the index of
inserted entries, which we really do not care about at all.
Introduce a new function `git_offmap_set`, which takes as parameters the map,
key and value and directly returns an error code. Convert the caller to make use
of it instead.
|
|
|
aa245623
|
2018-11-30T18:28:05
|
|
offmap: introduce high-level getter for values
The current way of looking up an entry from a map is tightly coupled with the
map implementation, as one first has to look up the index of the key and then
retrieve the associated value by using the index. As a caller, you usually do
not care about any indices at all, though, so this is more complicated than
really necessary. Furthermore, it invites for errors to happen if the correct
error checking sequence is not being followed.
Introduce a new high-level function `git_offmap_get` that takes a map and a key
and returns a pointer to the associated value if such a key exists. Otherwise,
a `NULL` pointer is returned. Adjust all callers that can trivially be
converted.
|
|
|
9694ef20
|
2018-12-17T09:01:53
|
|
oidmap: introduce high-level getter for values
The current way of looking up an entry from a map is tightly coupled with the
map implementation, as one first has to look up the index of the key and then
retrieve the associated value by using the index. As a caller, you usually do
not care about any indices at all, though, so this is more complicated than
really necessary. Furthermore, it invites for errors to happen if the correct
error checking sequence is not being followed.
Introduce a new high-level function `git_oidmap_get` that takes a map and a key
and returns a pointer to the associated value if such a key exists. Otherwise,
a `NULL` pointer is returned. Adjust all callers that can trivially be
converted.
|
|
|
351eeff3
|
2019-01-23T10:42:46
|
|
maps: use uniform lifecycle management functions
Currently, the lifecycle functions for maps (allocation, deallocation, resize)
are not named in a uniform way and do not have a uniform function signature.
Rename the functions to fix that, and stick to libgit2's naming scheme of saying
`git_foo_new`. This results in the following new interface for allocation:
- `int git_<t>map_new(git_<t>map **out)` to allocate a new map, returning an
error code if we ran out of memory
- `void git_<t>map_free(git_<t>map *map)` to free a map
- `void git_<t>map_clear(git<t>map *map)` to remove all entries from a map
This commit also fixes all existing callers.
|
|
004a3398
|
2019-01-28T18:31:21
|
|
Allow bypassing check '.keep' files using libgit2 option 'GIT_OPT_IGNORE_PACK_KEEP_FILE_CHECK'
|
|
|
f673e232
|
2018-12-27T13:47:34
|
|
git_error: use new names in internal APIs and usage
Move to the `git_error` name in the internal API for error-related
functions.
|
|
|
cd350852
|
2019-01-17T10:40:13
|
|
object_type: GIT_OBJECT_BAD is now GIT_OBJECT_INVALID
We use the term "invalid" to refer to bad or malformed data, eg
`GIT_REF_INVALID` and `GIT_EINVALIDSPEC`. Since we're changing the
names of the `git_object_t`s in this release, update it to be
`GIT_OBJECT_INVALID` instead of `BAD`.
|
|
|
168fe39b
|
2018-11-28T14:26:57
|
|
object_type: use new enumeration names
Use the new object_type enumeration names within the codebase.
|
|
|
852bc9f4
|
2018-11-23T19:26:24
|
|
khash: remove intricate knowledge of khash types
Instead of using the `khiter_t`, `git_strmap_iter` and `khint_t` types,
simply use `size_t` instead. This decouples code from the khash stuff
and makes it possible to move the khash includes into the implementation
files.
|
|
|
ecf4f33a
|
2018-02-08T11:14:48
|
|
Convert usage of `git_buf_free` to new `git_buf_dispose`
|
|
|
c8ee5270
|
2017-12-08T09:05:58
|
|
pack: rename `git_packfile_stream_free`
The function `git_packfile_stream_free` frees all state of the packfile
stream without freeing the structure itself. This naming makes it hard
to spot whether it will try to free the pointer itself or not, causing
potential future errors. Due to this reason, we have decided to name a
function freeing state without freeing the actual struture a "dispose"
function.
Rename `git_packfile_stream_free` to `git_packfile_stream_dispose` as a
first example following this rule.
|
|
|
c3514b0b
|
2017-12-23T14:59:07
|
|
Fix unpack double free
If an element has been cached, but then the call to
packfile_unpack_compressed() fails, the very next thing that happens is
that its data is freed and then the element is not removed from the
cache, which frees the data again.
This change sets obj->data to NULL to avoid the double-free. It also
stops trying to resolve deltas after two continuous failed rounds of
resolution, and adds a test for this.
|
|
|
53f2c6b1
|
2017-12-15T15:01:50
|
|
Simplified overflow condition
|
|
|
e7fac2af
|
2017-12-09T05:26:27
|
|
Using unsigned instead
|
|
|
28662c13
|
2017-12-08T06:00:27
|
|
libFuzzer: Prevent a potential shift overflow
The type of |base_offset| in get_delta_base() is `git_off_t`, which is a
signed `long`. That means that we need to make sure that the 8 most
significant bits are zero (instead of 7) to avoid an overflow when it is
shifted by 7 bits.
Found using libFuzzer.
|
|
|
1560b580
|
2017-08-15T10:35:47
|
|
Merge pull request #4288 from pks-t/pks/include-fixups
Include fixups
|
|
9842b327
|
2017-08-09T16:47:14
|
|
sha1_lookup: drop sha1_entry_pos function
This was pulled over from git.git, and is an experiment in
making binary-searching lists of sha1s faster. It was never
compiled by default (nor was it used upstream by default
without a special environment variable).
Unfortunately, it is actually slower in practice, and
upstream is planning to drop it in
git/git@f1068efefe6dd3beaa89484db5e2db730b094e0b (which has
some timing results). It's worth doing the same here for
simplicity.
|
|
|
0c7f49dd
|
2017-06-30T13:39:01
|
|
Make sure to always include "common.h" first
Next to including several files, our "common.h" header also declares
various macros which are then used throughout the project. As such, we
have to make sure to always include this file first in all
implementation files. Otherwise, we might encounter problems or even
silent behavioural differences due to macros or defines not being
defined as they should be. So in fact, our header and implementation
files should make sure to always include "common.h" first.
This commit does so by establishing a common include pattern. Header
files inside of "src" will now always include "common.h" as its first
other file, separated by a newline from all the other includes to make
it stand out as special. There are two cases for the implementation
files. If they do have a matching header file, they will always include
this one first, leading to "common.h" being transitively included as
first file. If they do not have a matching header file, they instead
include "common.h" as first file themselves.
This fixes the outlined problems and will become our standard practice
for header and source files inside of the "src/" from now on.
|
|
|
a693b873
|
2017-06-07T10:20:44
|
|
buffer: use `git_buf_init` with length
The `git_buf_init` function has an optional length parameter, which will
cause the buffer to be initialized and allocated in one step. This can
be used instead of static initialization with `GIT_BUF_INIT` followed by
a `git_buf_grow`. This patch does so for two functions where it is
applicable.
|
|
|
97eb5ef0
|
2017-06-07T10:05:54
|
|
buffer: rely on `GITERR_OOM` set by `git_buf_try_grow`
The function `git_buf_try_grow` consistently calls `giterr_set_oom`
whenever growing the buffer fails due to insufficient memory being
available. So in fact, we do not have to do this ourselves when a call
to any buffer-growing function has failed due to an OOM situation. But
we still do so in two functions, which this patch cleans up.
|
|
685f2251
|
2017-02-22T09:29:00
|
|
pack: fix looping over cache entries
Fixes a regression from #4092. This is a crash on 32-bit and I assume that
it doesn't do the right thing on 64-bit either. MSVC emits a warning for this,
but of course, it's easy to get lost among all of the similar 'possible loss
of data' warnings.
|
|
|
8f5fe903
|
2017-02-02T11:58:48
|
|
offmap: remove GIT__USE_OFFMAP macro
|
|
|
0d716905
|
2017-01-27T15:23:15
|
|
oidmap: remove GIT__USE_OIDMAP macro
|
|
|
85d2748c
|
2017-01-27T14:05:10
|
|
khash: avoid using `kh_key`/`kh_val` as lvalue
|
|
|
f31cb45a
|
2017-01-25T15:31:12
|
|
khash: avoid using `kh_put` directly
|
|
|
a8cd560b
|
2017-01-25T14:41:17
|
|
khash: avoid using `kh_del` directly
|
|
|
cb18386f
|
2017-01-25T14:26:58
|
|
khash: avoid using `kh_val`/`kh_value` directly
|
|
|
a853c527
|
2017-01-25T14:14:32
|
|
khash: avoid using `kh_get` directly
|
|
|
64e46dc3
|
2017-01-25T14:14:12
|
|
khash: avoid using `kh_end` directly
|
|
|
036daa59
|
2017-01-25T14:11:42
|
|
khash: use `git_map_exists` where applicable
|
|
|
9694d9ba
|
2017-01-25T14:09:17
|
|
khash: avoid using `kh_foreach`/`kh_foreach_value` directly
|
|
bf339ab0
|
2017-01-21T14:51:31
|
|
indexer: introduce `git_packfile_close`
Encapsulation!
|
|
|
909d5494
|
2016-12-29T12:25:15
|
|
giterr_set: consistent error messages
Error messages should be sentence fragments, and therefore:
1. Should not begin with a capital letter,
2. Should not conclude with punctuation, and
3. Should not end a sentence and begin a new one
|
|
903955f7
|
2016-12-19T17:26:09
|
|
Merge pull request #4027 from pks-t/pks/pack-deref-cache-on-error
pack: dereference cached pack entry on error
|
|
|
ff5eea06
|
2016-12-12T09:36:15
|
|
pack: dereference cached pack entry on error
When trying to uncompress deltas in a packfile's delta chain, we try to
add object bases to the packfile cache, subsequently decrementing its
reference count if it has been added successfully. This may lead to a
mismatched reference count in the case where we exit the loop early due
to an encountered error.
Fix the issue by decrementing the reference count in error cleanup.
|
|
|
34b32053
|
2016-11-25T15:02:34
|
|
Fix potential use of uninitialized values
|
|
|
0cf15e39
|
2016-11-02T12:23:12
|
|
pack: fix race in pack_entry_find_offset
In `pack_entry_find_offset`, we try to find the offset of a
certain object in the pack file. To do so, we first assert if the
packfile has already been opened and open it if not. Opening the
packfile is guarded with a mutex, so concurrent access to this is
in fact safe.
What is not thread-safe though is our calculation of offsets
inside the packfile. Assume two threads calling
`pack_entry_find_offset` at the same time. We first calculate the
offset and index location and only then determine if the pack has
already been opened. If so, we re-calculate the offset and index
address.
Now the case for two threads: thread 1 first calculates the
addresses and is subsequently suspended. The second thread will
now call `pack_index_open` and initialize the pack file,
calculating its addresses correctly. When the first thread is
resumed now, he'll see that the pack file has already been
initialized and will happily proceed with the addresses it has
already calculated before the check. As the pack file was not
initialized before, these addresses are bogus.
Fix the issue by only calculating the addresses after having
checked if the pack file is open.
|
|
|
6a2d2f8a
|
2015-06-17T06:42:20
|
|
delta: move delta application to delta.c
Move the delta application functions into `delta.c`, next to the
similar delta creation functions. Make the `git__delta_apply`
functions adhere to other naming and parameter style within the
library.
|
|
a97b769a
|
2016-04-27T12:00:31
|
|
odb: avoid inflating the full delta to read the header
When we read the header, we want to know the size and type of the
object. We're currently inflating the full delta in order to read the
first few bytes. This can mean hundreds of kB needlessly inflated for
large objects.
Instead use a packfile stream to read just enough so we can read the two
varints in the header and avoid inflating most of the delta.
|
|
|
d53cc13e
|
2016-03-31T04:12:46
|
|
Merge pull request #3575 from pmq20/master-13jan16
Remove duplicated calls to git_mwindow_close
|
|
|
e10144ae
|
2016-03-04T01:18:30
|
|
odb: improved not found error messages
When looking up an abbreviated oid, show the actual (abbreviated) oid
the caller passed instead of a full (but ambiguously truncated) oid.
|
|
|
6d97beb9
|
2016-02-25T15:46:59
|
|
pack: don't allow a negative offset
|
|
|
ea9e00cb
|
2016-02-23T18:15:43
|
|
pack: make sure we don't go out of bounds for extended entries
A corrupt index might have data that tells us to go look past the end of
the file for data. Catch these cases and return an appropriate error
message.
|
|
|
a53d2e39
|
2016-02-09T09:58:56
|
|
pack: do not free passed in poiter on error
The function `git_packfile_stream_open` tries to free the passed
in stream when an error occurs. The only call site is
`git_indexer_append`, though, which passes in the address of a
stream struct which has not been allocated on the heap.
Fix the issue by simply removing the call to free. In case of an
error we did not allocate any memory yet and otherwise it should
be the caller's responsibility to manage it's object's lifetime.
|
|
d4e4f272
|
2016-01-13T11:07:14
|
|
Remove duplicated calls to git_mwindow_close
|
|
|
b644e223
|
2016-01-13T11:02:38
|
|
Make packfile_unpack_compressed a private API
|
|
c369b379
|
2015-07-31T16:23:11
|
|
Remove extra semicolon outside of a function
Without this change, compiling with gcc and pedantic generates warning:
ISO C does not allow extra ‘;’ outside of a function.
|
|
|
878293f7
|
2015-06-10T10:44:14
|
|
pack: use git_buf when building the index name
The way we currently do it depends on the subtlety of strlen vs sizeof
and the fact that .pack is one longer than .idx. Let's use a git_buf so
we can express the manipulation we want much more clearly.
|
|
38c10ecd
|
2015-05-16T19:00:50
|
|
indexer: don't look for the index we're creating
When creating an index, know that we do not have an index for
our own packfile, preventing some unnecessary file opens and
error reporting.
|
|
|
b63b76e0
|
2014-10-12T11:42:31
|
|
Reorder some khash declarations
Keep the definitions in the headers, while putting the declarations in
the C files. Putting the function definitions in headers causes
them to be duplicated if you include two headers with them.
|
|
|
5091aff7
|
2015-02-20T08:40:40
|
|
Merge pull request #2907 from jasonhaslam/git_packfile_unpack_race
Fix race in git_packfile_unpack.
|
|
|
8588cb0c
|
2015-02-14T23:43:26
|
|
Fix race in git_packfile_unpack.
Increment refcount of newly added cache entries just like existing
entries looked up from the cache. Otherwise the new entry can be
evicted from the cache and destroyed while it's still in use.
|
|
|
f1453c59
|
2015-02-12T12:19:37
|
|
Make our overflow check look more like gcc/clang's
Make our overflow checking look more like gcc and clang's, so that
we can substitute it out with the compiler instrinsics on platforms
that support it. This means dropping the ability to pass `NULL` as
an out parameter.
As a result, the macros also get updated to reflect this as well.
|
|
|
392702ee
|
2015-02-09T23:41:13
|
|
allocations: test for overflow of requested size
Introduce some helper macros to test integer overflow from arithmetic
and set error message appropriately.
|
|
6f73e026
|
2014-12-24T11:42:50
|
|
Plug some leaks
|
|
ec7e680c
|
2014-11-20T12:07:55
|
|
Fix for misleading "missing delta bases" error - Fix #2721.
|
|
ea66215d
|
2014-10-26T10:29:19
|
|
Removed some useless variable assignments
|
|
|
e640a77c
|
2014-09-25T15:29:03
|
|
Silence uninitialized warning
|
|
5cd81bb3
|
2014-09-03T01:01:25
|
|
Several CppCat warnings fixed
|
|
|
b3d3459f
|
2014-08-26T15:09:47
|
|
pack: return the correct final offset
The callers of git_packfile_unpack() expect the obj_offset argument to
be set to the beginning of the next object. We were mistakenly returning
the the offset of the object's data, which causes the CRC function to
try to use the wrong offset.
Set obj_offset to curpos instead of elem->offset to point to the next
element and bring back expected behaviour.
|
|
|
5e0f47c3
|
2014-06-25T21:20:39
|
|
pack: free the new pack struct if we fail to insert
If we fail to insert the packfile in the map, make sure to free it.
This makes the free function only attempt to remove its mwindows from
the global list if we have opened the packfile to avoid accessing the
list unlocked.
|
|
|
b3b66c57
|
2014-06-18T17:13:12
|
|
Share packs across repository instances
Opening the same repository multiple times will currently open the same
file multiple times, as well as map the same region of the file multiple
times. This is not necessary, as the packfile data is immutable.
Instead of opening and closing packfiles directly, introduce an
indirection and allocate packfiles globally. This does mean locking on
each packfile open, but we already use this lock for the global mwindow
list so it doesn't introduce a new contention point.
|
|
|
649214be
|
2014-05-15T19:59:05
|
|
pack: init the cache on packfile alloc
When running multithreaded, it is not enough to check for the offmap
allocation. Move the call to cache_init() to packfile allocation so we
can be sure it is always allocated free of races.
This fixes #2355.
|
|
|
c968ce2c
|
2014-05-12T02:01:05
|
|
pack: don't forget to cache the base object
The base object is a good cache candidate, so we shouldn't forget to add
it to the cache.
|
|
|
15bcced2
|
2014-05-11T05:31:22
|
|
pack: use stack allocation for smaller delta chains
This avoid allocating the array on the heap for relatively small
chains. The expected performance increase is sadly not really
noticeable.
|
|
|
a3ffbf23
|
2014-05-11T03:50:34
|
|
pack: expose a cached delta base directly
Instead of going through a special entry in the chain, let's pass it as
an output parameter.
|
|
|
9dbd150f
|
2014-05-09T09:36:09
|
|
pack: simplify delta chain code
The switch makes the loop somewhat unwieldy. Let's assume it's fine and
perform the check when we're accessing the data.
This makes our code look a lot more like git's.
|
|
|
b2559f47
|
2014-05-08T17:14:59
|
|
pack: preallocate a 64-element chain
Dependency chains are often large and require a few
reallocations. Allocate a 64-element chain before doing anything else to
avoid allocations during the loop.
This value comes from the stack-allocated one git uses. We still
allocate this on the heap, but it does help performance a little bit.
|
|
|
e6d10c58
|
2014-05-08T16:24:54
|
|
pack: make sure not to leak the dep chain
|
|
|
a332e91c
|
2014-05-06T23:37:28
|
|
pack: use a cache for delta bases when unpacking
Bring back the use of the delta base cache for unpacking objects. When
generating the delta chain, we stop when we find a delta base in the
pack's cache and use that as the starting point.
|
|
|
2acdf4b8
|
2014-05-06T19:20:33
|
|
pack: unpack using a loop
We currently make use of recursive function calls to unpack an object,
resolving the deltas as we come back down the chain. This means that we
have unbounded stack growth as we look up objects in a pack.
This is now done in two steps: first we figure out what the dependency
chain is by looking up the delta bases until we reach a non-delta
object, pushing the information we need onto a stack and then we pop
from that stack and apply the deltas until there are no more left.
This version of the code does not make use of the delta base cache so it
is slower than what's in the mainline. A later commit will reintroduce
it.
|
|
|
ae081739
|
2014-05-06T21:21:04
|
|
pack: do not repeat the same error message four times
Repeating this error message makes it harder to find out where we
actually are finding the error, and they don't really describe what
we're trying to do.
|
|
|
86d5810b
|
2014-05-06T16:20:14
|
|
pack: remove misleading comment
|
|
8610487c
|
2014-01-23T23:28:28
|
|
Drop parsing pack filename SHA1 part, no one cares the filename
|
|
c7b3e1b3
|
2013-12-06T15:42:20
|
|
Some callback error check style cleanups
I find this easier to read...
|
|
|
26c1cb91
|
2013-12-09T09:44:03
|
|
One more rename/cleanup for callback err functions
|
|
|
dab89f9b
|
2013-12-04T21:22:57
|
|
Further EUSER and error propagation fixes
This continues auditing all the places where GIT_EUSER is being
returned and making sure to clear any existing error using the
new giterr_user_cancel helper. As a result, places that relied
on intercepting GIT_EUSER but having the old error preserved also
needed to be cleaned up to correctly stash and then retrieve the
actual error.
Additionally, as I encountered places where error codes were not
being propagated correctly, I tried to fix them up. A number of
those fixes are included in the this commit as well.
|
|
|
25e0b157
|
2013-12-06T15:07:57
|
|
Remove converting user error to GIT_EUSER
This changes the behavior of callbacks so that the callback error
code is not converted into GIT_EUSER and instead we propagate the
return value through to the caller. Instead of using the
giterr_capture and giterr_restore functions, we now rely on all
functions to pass back the return value from a callback.
To avoid having a return value with no error message, the user
can call the public giterr_set_str or some such function to set
an error message. There is a new helper 'giterr_set_callback'
that functions can invoke after making a callback which ensures
that some error message was set in case the callback did not set
one.
In places where the sign of the callback return value is
meaningful (e.g. positive to skip, negative to abort), only the
negative values are returned back to the caller, obviously, since
the other values allow for continuing the loop.
The hardest parts of this were in the checkout code where positive
return values were overloaded as meaningful values for checkout.
I fixed this by adding an output parameter to many of the internal
checkout functions and removing the overload. This added some
code, but it is probably a better implementation.
There is some funkiness in the network code where user provided
callbacks could be returning a positive or a negative value and
we want to rely on that to cancel the loop. There are still a
couple places where an user error might get turned into GIT_EUSER
there, I think, though none exercised by the tests.
|
|
51a3dfb5
|
2013-11-01T16:31:02
|
|
pack: `__object_header` always returns unsigned values
|
|
|
3343b5ff
|
2013-10-31T22:59:42
|
|
Fix warning on win64
|
|
|
51e82492
|
2013-10-03T16:54:25
|
|
pack: move the object header function here
|
|
|
67591c8c
|
2013-08-14T10:28:01
|
|
sha1_lookup: do not use the "experimental" lookup mode
|
|
3a2d48d5
|
2013-07-25T14:54:19
|
|
Close p->mwf.fd only if necessary
This fixes a regression introduced in revision 9d2f841a5d39fc25ce722a3904f6ebc9aa112222.
Signed-off-by: Sven Strickroth <email@cs-ware.de>
|
|
050af8bb
|
2013-07-15T16:00:00
|
|
pack: fix memory leak in error path
|
|
|
1a42dd17
|
2013-05-31T14:13:11
|
|
Mutex init can fail
It is obviously quite a serious problem if this happens, but mutex
initialization can fail and we should detect it. It's a bit like
a memory allocation failure, in that you're probably pretty screwed
if this occurs, but at least we'll catch it.
|
|
|
f658dc43
|
2013-05-31T14:09:58
|
|
Zero memory for major objects before freeing
By zeroing out the memory when we free larger objects (i.e. those
that serve as collections of other data, such as repos, odb, refdb),
I'm hoping that it will be easier for libgit2 bindings to find
errors in their object management code.
|
|
|
0ddfcb40
|
2013-05-02T18:06:14
|
|
Switch to index_version as "git_pack_file is ready" flag
We use p->index_map.data to check whether the struct has been set up
and all the information about the index is stored there. This variable
gets set up halfway through the setup process, however, and a thread
can come along and use fields that haven't been written to yet.
Crucially, pack_entry_find_offset() needs to read the index version
(which is written after index_map) to know the offset and stride
length to pass to sha1_entry_pos(). If these values are wrong,
assertions in it will fail, as it will be reading bogus data.
Make index_version the last field to be written and switch from using
p->index_map.data to p->index_version as "git_pack_file is ready" flag
as we can use it to know if every field has been written.
|
|
|
34bd5999
|
2013-05-02T17:14:05
|
|
Revert "Protect sha1_entry_pos call with mutex"
This reverts commit 8c535f3f6879c6796d8107d7eb80dd8b2105621b.
|
|
|
8c535f3f
|
2013-05-02T03:34:56
|
|
Protect sha1_entry_pos call with mutex
There is an occasional assertion failure in sha1_entry_pos from
pack_entry_find_index when running threaded. Holding the mutex
around the code that grabs the index_map data and processes it
makes this assertion failure go away.
|
|
|
9d2f841a
|
2013-05-02T03:03:54
|
|
Add extra locking around packfile open
We were still seeing a few issues in threaded access to packs.
This adds extra locks around the opening of the mwindow to
avoid a different race.
|
|
|
b7f167da
|
2013-04-29T13:52:12
|
|
Make git_oid_cmp public and add git_oid__cmp
|
|
|
5d2d21e5
|
2013-04-16T15:00:43
|
|
Consolidate packfile allocation further
Rename git_packfile_check to git_packfile_alloc since it is now
being used more in that capacity. Fix the various places that use
it. Consolidate some repeated code in odb_pack.c related to the
allocation of a new pack_backend.
|