|
4e8840fd
|
2021-08-30T18:20:35
|
|
Merge pull request #6022 from lollipopman/connect-proxy-host-header
Set Host Header to match CONNECT authority target
|
|
fc5d0e80
|
2021-08-30T21:24:54
|
|
Set Host Header to match CONNECT authority target
Prior to this change, for CONNECT requests, the Host header was set to
the host and port of the target http proxy. However, per the rfc7230 for
HTTP/1.1 this is incorrect as the Host header should match the target of
the CONNECT request, as detailed in section 5.3.3 & 5.4.
5.3.3. authority-form
The authority-form of request-target is only used for CONNECT
requests (Section 4.3.6 of [RFC7231]).
authority-form = authority
When making a CONNECT request to establish a tunnel through one or
more proxies, a client MUST send only the target URI's authority
component (excluding any userinfo and its "@" delimiter) as the
request-target. For example,
CONNECT www.example.com:80 HTTP/1.1
5.4. Host
<snip>
A client MUST send a Host header field in all HTTP/1.1 request
messages. If the target URI includes an authority component, then a
client MUST send a field-value for Host that is identical to that
authority component, excluding any userinfo subcomponent and its "@"
delimiter (Section 2.7.1). If the authority component is missing or
undefined for the target URI, then a client MUST send a Host header
field with an empty field-value.
This issue was noticed when proxying requests through HAProxy 2.2 which
rejects these invalid http requests.
|
|
|
5eb2b0b3
|
2021-08-30T08:27:27
|
|
httpclient: actually return `GIT_EAUTH`
|
|
|
9937967e
|
2021-08-29T21:29:14
|
|
Merge branch 'main' into http-use-eauth
|
|
3473a088
|
2021-05-12T11:48:23
|
|
httpclient: no proxy creds in requests if proxy is CONNECT type
|
|
|
049618ce
|
2021-04-30T15:11:54
|
|
httpclient: git_http_client_skip_body should drain socket of body
|
|
|
2807de5c
|
2020-12-17T15:18:31
|
|
http: handle ipv6 addresses
|
|
|
4f5f1127
|
2020-11-22T00:01:09
|
|
transports: use GIT_ASSERT
|
|
|
e316b0d3
|
2020-05-15T11:47:09
|
|
runtime: move init/shutdown into the "runtime"
Provide a mechanism for system components to register for initialization
and shutdown of the libgit2 runtime.
|
|
|
2ab99c6d
|
2020-10-04T18:30:10
|
|
Merge pull request #5576 from lollipopman/double-auth
httpclient: only free challenges for current_server type
|
|
2dea3eb4
|
2020-09-08T13:03:07
|
|
Don't fail if a HTTP server announces he supports a protocol upgrade
cf. RFC7230 section 6.7, an Upgrade header in a normal response merely informs the client that the server supports upgrading to other protocols, and the client can ask for such an upgrade in a later request. The server requiring an upgrade is via the 426 Upgrade Required response code, not the mere presence of the Upgrade response header.
(closes issue #5573)
Signed-off-by: Sven Strickroth <email@cs-ware.de>
|
|
|
bd346313
|
2020-07-10T15:37:08
|
|
httpclient: only free challenges for current_server type
Prior to this commit we freed both the server and proxy auth challenges
in git_http_client_read_response. This works when the proxy needs auth
or when the server needs auth, but it does not work when both the proxy
and the server need auth as we erroneously remove the server auth
challenge before we have added them as server credentials. Instead only
remove the challenges for the current_server type.
Co-authored-by: Stephen Gelman <ssgelm@gmail.com>
|
|
a6c9e0b3
|
2020-06-08T12:40:47
|
|
tree-wide: mark local functions as static
We've accumulated quite some functions which are never used outside of
their respective code unit, but which are lacking the `static` keyword.
Add it to reduce their linkage scope and allow the compiler to optimize
better.
|
|
|
04c7bdb4
|
2020-06-01T22:44:14
|
|
httpclient: clear the read_buf on new requests
The httpclient implementation keeps a `read_buf` that holds the data
in the body of the response after the headers have been written. We
store that data for subsequent calls to `git_http_client_read_body`. If
we want to stop reading body data and send another request, we need to
clear that cached data.
Clear the cached body data on new requests, just like we read any
outstanding data from the socket.
|
|
|
aa8b2c0f
|
2020-06-01T23:53:55
|
|
httpclient: don't read more than the client wants
When `git_http_client_read_body` is invoked, it provides the size of the
buffer that can be read into. This will be set as the parser context's
`output_size` member. Use this as an upper limit on our reads, and
ensure that we do not read more than the client requests.
|
|
|
570f0340
|
2020-06-01T19:10:38
|
|
httpclient: read_body should return 0 at EOF
When users call `git_http_client_read_body`, it should return 0 at the
end of a message. When the `on_message_complete` callback is called,
this will set `client->state` to `DONE`. In our read loop, we look for
this condition and exit.
Without this, when there is no data left except the end of message chunk
(`0\r\n`) in the http stream, we would block by reading the three bytes
off the stream but not making progress in any `on_body` callbacks.
Listening to the `on_message_complete` callback allows us to stop trying
to read from the socket when we've read the end of message chunk.
|
|
e7a1fd88
|
2020-03-26T11:42:47
|
|
Fix spelling error
Signed-off-by: Utkarsh Gupta <utkarsh@debian.org>
|
|
|
502e5d51
|
2020-03-01T12:44:39
|
|
httpclient: use a 16kb read buffer for macOS
Use a 16kb read buffer for compatibility with macOS SecureTransport.
SecureTransport `SSLRead` has the following behavior:
1. It will return _at most_ one TLS packet's worth of data, and
2. It will try to give you as much data as you asked for
This means that if you call `SSLRead` with a buffer size that is smaller
than what _it_ reads (in other words, the maximum size of a TLS packet),
then it will buffer that data for subsequent calls. However, it will
also attempt to give you as much data as you requested in your SSLRead
call. This means that it will guarantee a network read in the event
that it has buffered data.
Consider our 8kb buffer and a server sending us 12kb of data on an HTTP
Keep-Alive session. Our first `SSLRead` will read the TLS packet off
the network. It will return us the 8kb that we requested and buffer the
remaining 4kb. Our second `SSLRead` call will see the 4kb that's
buffered and decide that it could give us an additional 4kb. So it will
do a network read.
But there's nothing left to read; that was the end of the data. The
HTTP server is waiting for us to provide a new request. The server will
eventually time out, our `read` system call will return, `SSLRead` can
return back to us and we can make progress.
While technically correct, this is wildly ineffecient. (Thanks, Tim
Apple!)
Moving us to use an internal buffer that is the maximum size of a TLS
packet (16kb) ensures that `SSLRead` will never buffer and it will
always return everything that it read (albeit decrypted).
|
|
216165ec
|
2020-02-07T10:06:28
|
|
transports: use GIT_EAUTH for authentication failures
When the failure is clearly an auth failure
(as opposed to possibly an auth failure),
use the error code GIT_EAUTH instead of GIT_ERROR.
While we're here, fix a typo and improve an error message.
Fixes #5389.
|
|
|
3f54ba8b
|
2020-01-18T13:51:40
|
|
credential: change git_cred to git_credential
We avoid abbreviations where possible; rename git_cred to
git_credential.
In addition, we have standardized on a trailing `_t` for enum types,
instead of using "type" in the name. So `git_credtype_t` has become
`git_credential_t` and its members have become `GIT_CREDENTIAL` instead
of `GIT_CREDTYPE`.
Finally, the source and header files have been renamed to `credential`
instead of `cred`.
Keep previous name and values as deprecated, and include the new header
files from the previous ones.
|
|
|
e9cef7c4
|
2020-01-11T23:53:45
|
|
http: introduce GIT_ERROR_HTTP
Disambiguate between general network problems and HTTP problems in error
codes.
|
|
|
29762e40
|
2020-01-01T16:14:37
|
|
httpclient: use defines for status codes
|
|
|
7372573b
|
2019-10-25T12:22:10
|
|
httpclient: support expect/continue
Allow users to opt-in to expect/continue handling when sending a POST
and we're authenticated with a "connection-based" authentication
mechanism like NTLM or Negotiate.
If the response is a 100, return to the caller (to allow them to post
their body). If the response is *not* a 100, buffer the response for
the caller.
HTTP expect/continue is generally safe, but some legacy servers
have not implemented it correctly. Require it to be opt-in.
|
|
|
6c21c989
|
2019-12-14T21:32:07
|
|
httpclient: support CONNECT proxies
Fully support HTTP proxies, in particular CONNECT proxies, that allow us
to speak TLS through a proxy.
|
|
|
6b208836
|
2019-12-18T21:55:28
|
|
httpclient: handle chunked responses
Detect responses that are sent with Transfer-Encoding: chunked, and
record that information so that we can consume the entire message body.
|
|
|
6a095679
|
2019-12-14T10:34:36
|
|
httpclient: support authentication
Store the last-seen credential challenges (eg, all the
'WWW-Authenticate' headers in a response message). Given some
credentials, find the best (first) challenge whose mechanism supports
these credentials. (eg, 'Basic' supports username/password credentials,
'Negotiate' supports default credentials).
Set up an authentication context for this mechanism and these
credentials. Continue exchanging challenge/responses until we're
authenticated.
|
|
|
1152f361
|
2019-12-13T18:37:19
|
|
httpclient: consume final chunk message
When sending a new request, ensure that we got the entirety of the
response body. Our caller may have decided that they were done reading.
If we were not at the end of the message, this means that we need to
tear down the connection and cannot do keep-alive.
However, if the caller read all of the message, but we still have a
final end-of-response chunk signifier (ie, "0\r\n\r\n") on the socket,
then we should consider that the response was successfully copmleted.
If we're asked to send a new request, try to read from the socket, just
to clear out that end-of-chunk message, marking ourselves as
disconnected on any errors.
|
|
|
84b99a95
|
2019-12-12T13:53:43
|
|
httpclient: add chunk support to POST
Teach httpclient how to support chunking when POSTing request bodies.
|
|
|
eacecebd
|
2019-12-12T13:25:32
|
|
httpclient: introduce a simple http implementation
Introduce a new http client implementation that can GET and POST to
remote URLs.
Consumers can use `git_http_client_init` to create a new client,
`git_http_client_send_request` to send a request to the remote server
and `git_http_client_read_response` to read the response.
The http client implementation will perform the I/O with the remote
server (http or https) but does not understand the git smart transfer
protocol. This allows us to split the concerns of the http subtransport
from the actual http implementation.
|