src/index.c


Log

Author Commit Date CI Message
Patrick Steinhardt f80852af 2016-05-02T14:30:14 index: fix memory leak on error case
Carlos Martín Nieto 60a194aa 2016-03-20T11:00:12 tree: re-use the id and filename in the odb object Instead of copying over the data into the individual entries, point to the originals, which are already in a format we can use.
Patrick Steinhardt 80a834a5 2016-03-01T16:00:49 index: assert required OID are non-NULL
Edward Thomson 6ddf533a 2016-02-23T18:29:16 git_index_add: validate objects in index entries (optionally) When `GIT_OPT_ENABLE_STRICT_OBJECT_CREATION` is turned on, validate the index entries given to `git_index_add`.
Carlos Martín Nieto 9f4e7c84 2016-02-25T18:42:09 Merge pull request #3638 from ethomson/nsec USE_NSECS fixes
Edward Thomson 3d6a42d1 2016-02-25T11:23:19 nsec: support NDK's crazy nanoseconds Android NDK does not have a `struct timespec` in its `struct stat` for nanosecond support, instead it has a single nanosecond member inside the struct stat itself. We will use that and use a macro to expand to the `st_mtim` / `st_mtimespec` definition on other systems (much like the existing `st_mtime` backcompat definition).
Patrick Steinhardt 0f1e2d20 2016-02-23T11:23:26 index: fix contradicting comparison The overflow check in `read_reuc` tries to verify if the `git__strtol32` parses an integer bigger than UINT_MAX. The `tmp` variable is casted to an unsigned int for this and then checked for being greater than UINT_MAX, which obviously can never be true. Fix this by instead fixing the `mode` field's size in `struct git_index_reuc_entry` to `uint32_t`. We can now parse the int with `git__strtol64`, which can never return a value bigger than `UINT32_MAX`, and additionally checking if the returned value is smaller than zero. We do not need to handle overflows explicitly here, as `git__strtol64` returns an error when the returned value would overflow.
Patrick Steinhardt 7808c937 2016-02-22T15:59:15 index: plug memory leak in `read_conflict_names`
Carlos Martín Nieto 5663d4f6 2016-02-18T12:31:56 Merge pull request #3613 from ethomson/fixups Remove most of the silly warnings
Carlos Martín Nieto 594a5d12 2016-02-18T12:28:06 Merge pull request #3619 from ethomson/win32_forbidden win32: allow us to read indexes with forbidden paths on win32
Edward Thomson 318b825e 2016-02-16T17:11:46 index: allow read of index w/ illegal entries Allow `git_index_read` to handle reading existing indexes with illegal entries. Allow the low-level `git_index_add` to add properly formed `git_index_entry`s even if they contain paths that would be illegal for the current filesystem (eg, `AUX`). Continue to disallow `git_index_add_bypath` from adding entries that are illegal universally illegal (eg, `.git`, `foo/../bar`).
Edward Thomson b2ca8d9c 2016-02-12T10:22:54 index: explicitly cast the teeny index entry members
Edward Thomson 997e0301 2016-02-12T10:11:32 index: don't use `seek` return as an error code
Edward Thomson 9a634cba 2016-02-12T10:03:29 index: explicitly cast new hash size to an int
Arthur Schreiber 3679ebae 2016-02-11T23:37:52 Horrible fix for #3173.
Carlos Martín Nieto 9d81509a 2015-12-23T11:54:52 index: get rid of the locking We don't support using an index object from multiple threads at the same time, so the locking doesn't have any effect when following the rules. If not following the rules, things are going to break down anyway.
Vicent Marti ef8b7feb 2015-12-16T19:36:50 index: Also size-hint the hash table Note that we're not checking whether the resize succeeds; in OOM cases, we let it run with a "small" vector and hash table and see if by chance we can grow it dynamically as we insert the new entries. Nothing to lose really.
Vicent Marti d7d46cfb 2015-12-16T17:00:25 index: Preallocate the entries vector with size hint
Vicent Marti 0cc20a8c 2015-12-16T16:53:06 index: Adjust namemask & mode when filling
Vicent Marti 879ebab3 2015-12-16T12:30:52 merge: Use `git_index__fill` to populate the index Instead of calling `git_index_add` in a loop, use the new `git_index_fill` internal API to fill the index with the initial staged entries. The new `fill` helper assumes that all the entries will be unique and valid, so it can append them at the end of the entries vector and only sort it once at the end. It performs no validation checks. This prevents the quadratic behavior caused by having to sort the entries list once after every insertion.
Carlos Martín Nieto dc49eb58 2015-12-10T11:57:44 Merge pull request #3538 from pks-t/pks/index-memory-leak index: always queue `remove_entry` for removal
Patrick Steinhardt b057fdef 2015-12-08T16:00:35 index: always queue `remove_entry` for removal When replacing an index with a new one, we need to iterate through all index entries in order to determine which entries are equal. When it is not possible to re-use old entries for the new index, we move it into a list of entries that are to be removed and thus free'd. When we encounter a non-zero error code, though, we skip adding the current index entry to the remove-queue. `INSERT_MAP_EX`, which is the function last run before adding to the remove-queue, may return a positive non-zero code that indicates what exactly happened while inserting the element. In this case we skip adding the entry to the remove-queue but still continue the current operation, leading to a leak of the current entry. Fix this by checking for a negative return value instead of a non-zero one when we want to add the current index entry to the remove-queue.
Edward Thomson 626f9e24 2015-12-03T16:27:15 index: canonicalize inserted paths safely When adding to the index, we look to see if a portion of the given path matches a portion of a path in the index. If so, we will use the existing path information. For example, when adding `foo/bar.c`, if there is an index entry to `FOO/other` and the filesystem is case insensitive, then we will put `bar.c` into the existing tree instead of creating a new one with a different case. Use `strncmp` to do that instead of `memcmp`. When we `bsearch` into the index, we locate the position where the new entry would go. The index entry at that position does not necessarily have a relation to the entry we're adding, so we cannot make assumptions and use `memcmp`. Instead, compare them as strings. When canonicalizing paths, we look for the first index entry that matches a given substring.
Edward Thomson 25e84f95 2015-11-23T15:49:54 checkout: only consider nsecs when built that way When examining the working directory and determining whether it's up-to-date, only consider the nanoseconds in the index entry when built with `GIT_USE_NSEC`. This prevents us from believing that the working directory is always dirty when the index was originally written with a git client that uinderstands nsecs (like git 2.x).
Edward Thomson 5f32c506 2015-11-16T18:06:52 racy: make git_index_read_index handle raciness Ensure that `git_index_read_index` clears the uptodate bit on files that it modifies. Further, do not propagate the cache from an on-disk index into another on-disk index. Although this should not be done, as `git_index_read_index` is used to bring an in-memory index into another index (that may or may not be on-disk), ensure that we do not accidentally bring in these bits when misused.
Edward Thomson 27bc41cf 2015-11-13T16:31:51 index: clear uptodate bit on save The uptodate bit should have a lifecycle of a single read->write on the index. Once the index is written, the files within it should be scanned for racy timestamps against the new index timestamp.
Edward Thomson d1101263 2015-11-13T15:32:48 index: don't detect raciness in uptodate entries Keep track of entries that we believe are up-to-date, because we added the index entries since the index was loaded. This prevents us from unnecessarily examining files that we wrote during the cleanup of racy entries (when we smudge racily clean files that have a timestamp newer than or equal to the index's timestamp when we read it). Without keeping track of this, we would examine every file that we just checked out for raciness, since all their timestamps would be newer than the index's timestamp.
Edward Thomson cb0ff012 2015-11-06T17:15:35 racy-git: do a single index->workdir diff When examining paths that are racily clean, do a single index->workdir diff over the entirety of the racily clean files, instead of a diff per file.
Carlos Martín Nieto 75a0ccf5 2015-11-12T19:53:09 Merge pull request #3170 from CmdrMoozy/nsec_fix git_index_entry__init_from_stat: set nsec fields in entry stats
Carlos Martín Nieto ad8509ef 2015-11-12T11:54:06 index: overwrite the path when inserting conflicts When we insert a conflict in a case-insensitive index, accept the new entry's path as the correct case instead of leaving the path we already had. This puts `git_index_conflict_add()` on the same level as `git_index_add()` in this respect.
Carlos Martín Nieto 16604d74 2015-11-11T00:36:15 index: correctly report which conflict stage has a wrong filemode When we're at offset 'i', we're dealing with the 'i+1' stage, since conflicts start at 1.
Edward Thomson 0bf77e32 2015-10-30T13:07:02 index: read_index must update hashes
Vicent Marti 1e5e02b4 2015-10-27T17:26:04 pool: Simplify implementation
Vicent Marti d307a013 2015-10-27T22:17:32 reuc: Be smarter when inserting new REUC entries Inserting new REUC entries can quickly become pathological given that each insert unsorts the REUC vector, and both subsequent lookups *and* insertions will require sorting it again before being successful. To avoid this, we're switching to `git_vector_insert_sorted`: this keeps the REUC vector constantly sorted and lets us use the `on_dup` callback to skip an extra binary search on each insertion.
Vicent Marti 128e94bb 2015-10-21T12:04:53 index: Remove unneeded consts
Edward Thomson 21515f22 2015-09-29T15:49:16 index: also try conflict mode when inserting When we do not trust the on-disk mode, we use the mode of an existing index entry. This allows us to preserve executable bits on platforms that do not honor them on the filesystem. If there is no stage 0 index entry, also look at conflicts to attempt to answer this question: prefer the data from the 'ours' side, then the 'theirs' side before falling back to the common ancestor.
Axel Rasmussen 0226f7dd 2015-08-29T13:59:20 diff/index: respect USE_NSEC for racily clean file detection
Axel Rasmussen e9e6df2c 2015-06-15T09:28:55 cmake: Only provide USE_NSEC if struct stat members are avilable. This allows us to remove OS checks from source code, instead relying on CMake to detect whether or not `struct stat` has the nanoseconds members we rely on.
Axel Rasmussen e7de893e 2015-06-01T13:43:54 cmake: add USE_NSEC, and only check nanosec m/ctime if enabled
Carlos Martín Nieto 6d6020de 2015-09-08T18:34:51 Merge pull request #3353 from ethomson/wrongcase_add index: canonicalize directory case when adding
Edward Thomson 2964cbea 2015-09-08T11:50:08 Merge pull request #3381 from leoyanggit/index_directory_iterator New feature: add the ablility to iterate through a directory in index
Edward Thomson a32bc85e 2015-08-07T12:43:49 git_index_add: allow case changing renames On case insensitive platforms, allow `git_index_add` to provide a new path for an existing index entry. Previously, we would maintain the case in an index entry without the ability to change it (except by removing an entry and re-adding it.) Higher-level functions (like `git_index_add_bypath` and `git_index_add_frombuffers`) continue to keep the old path for easier usage.
Edward Thomson 280adb3f 2015-08-04T16:51:00 index: canonicalize directory case when adding On case insensitive systems, when given a user-provided path in the higher-level index addition functions (eg `git_index_add_bypath` / `git_index_add_frombuffer`), examine the index to try to match the given path to an existing directory. Various mechanisms can cause the on-disk representation of a folder to not match the representation in HEAD or the index - for example, a case changing rename of some file `a/file.txt` to `A/file.txt` will update the paths in the index, but not rename the folder on disk. If a user subsequently adds `a/other.txt`, then this should be stored in the index as `A/other.txt`.
Edward Thomson 9fd4c9c8 2015-09-06T10:50:22 Merge pull request #3366 from libgit2/cmn/index-hashmap Use a hashmap for path-based lookups in the index
Leo Yang c097f717 2015-08-17T15:02:02 New API: git_index_find_prefix Find the first index entry matching a prefix.
Carlos Martín Nieto 81b76367 2015-09-04T13:30:49 index: put the icase insert choice in macros This should let us see more clearly what we're doing and avoid the ugly 'if' we need every time we want to interact with the map.
Edward Thomson 810cabb9 2015-07-28T20:04:11 racy-git: TODO to use improved diffing
Edward Thomson ed1c6446 2015-07-28T11:41:27 iterator: use an options struct instead of args
Carlos Martín Nieto af1d5239 2015-08-14T21:10:12 index: keep a hash table as well as a vector of entries The hash table allows quick lookup of specific paths, while we use the vector for enumeration.
Edward Thomson ef4857c2 2015-08-03T16:50:27 errors: tighten up git_error_state OOMs a bit more When an error state is an OOM, make sure that we treat is specially and do not try to free it.
Carlos Martín Nieto ea961abf 2015-08-01T19:53:53 index: stage an unregistered submodule as well We previously added logic to `_add_bypath()` to update a submodule. Go further and stage the submodule even if it's not registered to behave like git.
Carlos Martín Nieto 247d27c2 2015-07-11T19:41:03 index: allow add_bypath to update submodules Similarly to how git itself does it, allow the index update operation to stage a change in a submodule's HEAD.
Carlos Martín Nieto 74975846 2015-06-18T14:22:10 index: check racily clean entries more thoroughly When an entry has a racy timestamp, we need to check whether the file itself has changed since we put its entry in the index. Only then do we smudge the size field to force a check the next time around.
Carlos Martín Nieto 624c949f 2015-06-20T16:17:28 index: make relative comparison use the checksum as well This is used by the submodule in order to figure out if the index has changed since it last read it. Using a timestamp is racy, so let's make it use the checksum, just like we now do for reloading the index itself.
Carlos Martín Nieto 5e947c91 2015-06-19T22:05:08 index: use the checksum to check whether it's been modified We currently use a timetamp to check whether an index file has been modified since we last read it, but this is racy. If two updates happen in the same second and we read after the first one, we won't detect the second one. Instead read the SHA-1 checksum of the file, which are its last 20 bytes which gives us a sure-fire way to detect whether the file has changed since we last read it. As we're now keeping track of it, expose an accessor to this data.
Carlos Martín Nieto 316b820b 2015-06-15T09:55:40 index: zero the size of racily-clean entries If a file entry has the same timestamp as the index itself, it is considered racily-clean, as it may have been modified after the index was written, but during the same second. We take extra steps to check the contents, but this is just one part of avoiding races. For files which do have changes but have not been updated in the index, updating the on-disk index means updating its timestamp, which means we would no longer recognise these entries as racy and we would trust the timestamp to tell us whether they have changed. In order to work around this, git zeroes out the file-size field in entries with the same timestamp as the index in order to force the next diff to check the contents. Do so in libgit2 as well.
Edward Thomson 8147b1af 2015-05-25T20:03:59 diff: introduce binary diff callbacks Introduce a new binary diff callback to provide the actual binary delta contents to callers. Create this data from the diff contents (instead of directly from the ODB) to support binary diffs including the workdir, not just things coming out of the ODB.
Edward Thomson 9b3e41f7 2015-05-19T18:29:15 index_add_all: remove conflicts when no wd file If there exists a conflict in the index, but no file in the working directory, this implies that the user wants to accept the resolution by removing the file. Thus, remove the conflict entry from the index, instead of trying to add a (nonexistent) file.
Edward Thomson 9f545b9d 2015-05-19T11:23:59 introduce `git_index_entry_is_conflict` It's not always obvious the mapping between stage level and conflict-ness. More importantly, this can lead otherwise sane people to write constructs like `if (!git_index_entry_stage(entry))`, which (while technically correct) is unreadable. Provide a nice method to help avoid such messy thinking.
Edward Thomson d67f270e 2015-05-14T13:30:29 index: validate mode of new conflicts
Edward Thomson 3ab5a659 2015-05-14T12:54:39 index: remove error message in non-error remove If `git_index_remove_bypath` does no work, and returns an OK error code, it should not set an error message.
Edward Thomson ecd60a56 2015-05-14T11:52:48 conflicts: when adding conflicts, remove staged When adding a conflict for some path, remove the staged entry. Otherwise, an illegal index (with both stage 0 and high-stage entries) would result.
Edward Thomson cbfeecf3 2015-05-20T20:13:45 git_index_add_all: don't recurse ignored dirs No need to get reports about individual ignored files, having a single ignored directory delta is enough.
Edward Thomson fa9a969d 2015-05-20T18:22:17 index_add_all: include untracked files in new subdirs
Carlos Martín Nieto 2b2dfe80 2015-05-12T12:07:33 index: include TYPECHANGE in the diff Without this option, we would not be able to catch exec bit changes.
Carlos Martín Nieto 0a78a52e 2015-05-11T16:09:09 index: make add_all to act on a diff Instead of going through each entry we have and re-adding, which may not even be correct for certain crlf options and has bad performance, use the function which performs a diff against the worktree and try to add and remove files from that list.
Carlos Martín Nieto 197307f6 2015-05-11T15:19:15 index: refactor diff-based update_all to match other applies Refactor so we look like the code we're replacing, which should also allow us to more easily inplement add-all.
Carlos Martín Nieto 713e11e0 2015-05-11T13:24:53 index: use a diff to perform update_all We currently iterate over all the entries and re-add them to the index. While this provides correctness, it is wasteful as we try to re-insert files which have not changed. Instead, take a diff between the index and the worktree and only re-add those which we already know have changed.
Edward Thomson 35d39761 2015-03-18T00:25:18 index: introduce git_index_read_index
John Fultz d3282680 2015-04-20T23:41:04 Fix index-adding functions to know when to trust filemodes. The idea...sometimes, a filemode is user-specified via an explicit git_index_entry. In this case, believe the user, always. Sometimes, it is instead built up by statting the file system. In those cases, go with the existing logic we have to determine whether the file system supports all filemodes and symlinks, and make the best guess. On file systems which have full filemode and symlink support, this commit should make no difference. On others (most notably Windows), this will fix problems things like: * git_index_add and git_index_add_frombuffer() should be believed. * As a consequence, git_checkout_tree should make the filemodes in the index match the ones in the tree. * And diffs with GIT_DIFF_UPDATE_INDEX don't write the wrong filemodes. * And merges, and probably other downstream stuff now fixed, too. This makes my previous changes to checkout.c unnecessary, so they are now reverted. Also, added a test for index_entry permissions from git_index_add and git_index_add_frombuffer, both of which failed before these changes.
Pierre-Olivier Latour 807566d5 2015-04-03T18:59:11 Entry argument passed to git_index_add_frombuffer() should be const
Damien PROFETA a275fbc0 2015-02-05T11:40:16 Add API to add a memory buffer to an index git_index_add_frombuffer enables now to store a memory buffer in the odb and to store an entry in the index directly if the index is attached to a repository.
Carlos Martín Nieto a291790a 2015-02-15T05:18:01 Merge pull request #2831 from ethomson/merge_lock merge: lock index during the merge (not just checkout)
Edward Thomson 41fae48d 2015-02-03T22:31:10 indexwriter: an indexwriter for repo operations Provide git_indexwriter_init_for_operation for the common locking pattern in merge, rebase, revert and cherry-pick.
Edward Thomson 55798fd1 2015-01-17T20:49:04 git_indexwriter: lock then write the index Introduce `git_indexwriter`, to allow us to lock the index while performing additional operations, then complete the write (or abort, unlocking the index).
Edward Thomson f1453c59 2015-02-12T12:19:37 Make our overflow check look more like gcc/clang's Make our overflow checking look more like gcc and clang's, so that we can substitute it out with the compiler instrinsics on platforms that support it. This means dropping the ability to pass `NULL` as an out parameter. As a result, the macros also get updated to reflect this as well.
Edward Thomson 2884cc42 2015-02-11T09:39:38 overflow checking: don't make callers set oom Have the ALLOC_OVERFLOW testing macros also simply set_oom in the case where a computation would overflow, so that callers don't need to.
Edward Thomson 392702ee 2015-02-09T23:41:13 allocations: test for overflow of requested size Introduce some helper macros to test integer overflow from arithmetic and set error message appropriately.
Jacques Germishuys b63b3b0e 2015-01-25T14:08:05 Ensure git_index_entry is not NULL before trying to free it
Edward Thomson 2fe8157e 2014-12-22T18:42:03 index: reuc and name entrycounts should be size_t For the REUC and NAME entries, we use size_t internally, and we take size_t for the get_byindex() functions, but the entrycount() functions strangely cast to an unsigned int instead.
Edward Thomson a64119e3 2014-11-25T18:13:00 checkout: disallow bad paths on win32 Disallow: 1. paths with trailing dot 2. paths with trailing space 3. paths with trailing colon 4. paths that are 8.3 short names of .git folders ("GIT~1") 5. paths that are reserved path names (COM1, LPT1, etc). 6. paths with reserved DOS characters (colons, asterisks, etc) These paths would (without \\?\ syntax) be elided to other paths - for example, ".git." would be written as ".git". As a result, writing these paths literally (using \\?\ syntax) makes them hard to operate with from the shell, Windows Explorer or other tools. Disallow these.
Vicent Marti 0d388adc 2014-11-25T00:58:03 index: Check for valid paths before creating an index entry
Carlos Martín Nieto 62a617dc 2014-11-06T16:16:46 iterator: submodules are determined by an index or tree We cannot know from looking at .gitmodules whether a directory is a submodule or not. We need the index or tree we are comparing against to tell us. Otherwise we have to assume the entry in .gitmodules is stale or otherwise invalid. Thus we pass the index of the repository into the workdir iterator, even if we do not want to compare against it. This follows what git does, which even for `git diff <tree>`, it will consider staged submodules as such.
Carlos Martín Nieto c2f8b215 2014-09-28T07:00:49 index: write out the tree cache extension Keeping the cache around after read-tree is only one part of the optimisation opportunities. In order to share the cache between program instances, we need to write the TREE extension to the index. Do so, taking the opportunity to rename 'entries' to 'entry_count' to match the name given in the format description. The included test is rather trivial, but works as a sanity check.
Carlos Martín Nieto 6843cebe 2014-07-10T14:10:39 index: fill the tree cache when reading from a tree When reading from a tree, we know what every tree is going to look like, so we can fill in the tree cache completely, making use of the index for modification of trees a lot quicker.
Carlos Martín Nieto 19c88310 2014-07-10T13:48:13 tree-cache: move to use a pool allocator This simplifies freeing the entries quite a bit; though there aren't that many failure paths right now, introducing filling the cache from a tree will introduce more. This makes sure not to leak memory on errors.
Jacques Germishuys ff97778a 2014-09-25T13:07:36 The raw index buffer content is not guaranteed to be aligned * Ensure alignment by copying the content into a structure on the stack
Carlos Martín Nieto 052a2ffd 2014-05-22T16:01:02 index: check for valid filemodes on add
Russell Belfer 0fc8e1f6 2014-04-28T14:34:55 Lay groundwork for updating stat cache in diff This reorganized the diff OID calculation to make it easier to correctly update the stat cache during a diff once the flags to do so are enabled. This includes marking the path of a git_index_entry as const so we can make a "fake" git_index_entry with a "const char *" path and not get warnings. I was a little surprised at how unobtrusive this change was, but I think it's probably a good thing.
Russell Belfer 17ef678c 2014-04-21T11:55:57 Fix some coverity-found issues
Russell Belfer ea642d61 2014-04-14T12:29:27 Fix race checking for existing index items In the threading tests, I was still seeing a race condition where the same item could end up being inserted multiple times into the index. Preserving the sorted-ness of the index outside of the `index_insert` call fixes the issue.
Russell Belfer 7d490872 2014-04-10T22:31:01 Attribute file cache refactor This is a big refactoring of the attribute file cache to be a bit simpler which in turn makes it easier to enforce a lock around any updates to the cache so that it can be used in a threaded env. Tons of changes to the attributes and ignores code.
Russell Belfer aba6b5ed 2014-03-14T21:59:26 Fix leak in git_index_conflict_cleanup I introduced a leak into conflict cleanup by removing items from inside the git_vector_remove_matching call. This simplifies the code to just use one common way for the two conflict cleanup APIs. When an index has an active snapshot, removing an item can cause an error (inserting into the deferred deletion vector), so I made the git_index_conflict_cleanup API return an error code. I felt like this wasn't so bad since it is just like the other APIs. I fixed up a couple of comments while I was changing the header.
Russell Belfer 52bb0476 2014-03-14T13:53:15 Clean up index snapshot function naming Clear up some of the various "find" functions and the snapshot API naming to be things I like more.
Russell Belfer 8a2834d3 2014-03-14T13:20:51 Index locking and entry allocation changes This makes the lock management on the index a little bit broader, having a number of routines hold the lock across looking up the item to be modified and actually making the modification. Still not true thread safety, but more pure index modifications are now safe which allows the simple cases (such as starting up a diff while index modifications are underway) safe enough to get the snapshot without hitting allocation problems. As part of this, I simplified the allocation of index entries to use a flex array and just put the path at the end of the index entry. This makes every entry self-contained and makes it a little easier to feel sure that pointers to strings aren't being accidentally copied and freed while other references are still being held.
Russell Belfer 3b4c401a 2014-02-10T13:20:08 Decouple index iterator sort from index This makes the index iterator honor the GIT_ITERATOR_IGNORE_CASE and GIT_ITERATOR_DONT_IGNORE_CASE flags without modifying the index data itself. To take advantage of this, I had to export a number of the internal index entry comparison functions. I also wrote some new tests to exercise the capability.
Russell Belfer dac16048 2014-02-08T16:42:26 Add mutex around index entries changes This surrounds any function that mutates the entries vector with a mutex so it can be safely snapshotted.
Russell Belfer 54edbb98 2014-02-07T16:48:27 Add index snapshot and use it for iterator
Russell Belfer 3dbee456 2014-02-07T14:10:35 Some index internals refactoring Again, laying groundwork for some index iterator changes, this contains a bunch of code refactorings for index internals that should make it easier down the line to add locking around index modifications. Also this removes the redundant prefix_position function and fixes some potential memory leaks.
Russell Belfer c67fd4c9 2014-02-07T11:20:36 Some vector utility tweaks This is just laying some groundwork for internal index changes that I'm working on.