kmx git

Commit	Date	Message
8dde7e11	2018-12-19T11:04:58	refdb_fs: refactor error handling in `refdb_reflog_fs__delete` The function `refdb_reflog_fs__delete` uses the `if (!error && foobar())` pattern of checking, where error conditions are being checked by following calls to different code. This does not match our current style, where the call-site of a function is usually directly responsible for checking the return value. Convert the function to use `if ((error = foobar()) < 0) goto out;` style. Note that this changes the code flow a bit: previously, we were always trying to delete empty reference hierarchies even if deleting the reflog entry has failed. This wasn't much of a problem -- if deletion failed, the hierarchy will still contain at least one file and thus the function call was an expensive no-op. Now, we will only perform this deletion if we have successfully removed the reflog.
bc219657	2018-12-19T11:01:55	Merge pull request #4833 from csware/drop-empty-dirs Remove empty (sub-)directories when deleting refs
6ea9381b	2018-12-14T14:43:09	annotated_commit: peel to commit instead of assuming we have one We want to allow the creation of annotated commits out of annotated tags and for that we have to peel the reference all the way to the commit instead of stopping at the first id it provides.
5bd78c48	2018-12-14T14:41:17	refs: constify git_reference_peel We have no need to take a non-const reference. This does involve some other work to make sure we don't mix const and non-const variables, but by splitting what we want each variable to do we can also simplify the logic for when we do want to free a new reference we might have allocated.
da8138b0	2018-12-06T12:59:17	Merge pull request #4906 from QBobWatson/bugfix Fix segfault in loose_backend__readstream
2f3c4b69	2018-12-06T10:48:20	Typesetting conventions
f4835e44	2018-12-04T21:48:12	make proxy_stream_close close target stream even on errors When git_filter_apply_fn callback returns a error while smudging proxy_stream_close ends up returning without closing the stream. This is turn makes blob_content_to_file crash as it asserts the stream being closed whether there are errors or not. Closing the target stream on error fixes this problem.
08afdb57	2018-12-04T10:59:25	Removed one null check
36f80742	2018-12-04T10:12:24	Fix segfault in loose_backend__readstream If the routine exits with error before stream or hash_ctx is initialized, the program will segfault when trying to free them.
168fe39b	2018-11-28T14:26:57	object_type: use new enumeration names Use the new object_type enumeration names within the codebase.
18e71e6d	2018-11-28T13:31:06	index: use new enum and structure names Use the new-style index names throughout our own codebase.
0ddc6094	2018-11-30T09:46:14	Merge pull request #4770 from tiennou/feature/merge-analysis-any-branch Allow merge analysis against any reference
e7873eb2	2018-11-29T08:00:31	Merge pull request #4888 from TheBB/add-cb revwalk: Allow changing hide_cb
487233fa	2018-11-29T07:21:41	Merge pull request #4895 from pks-t/pks/unused-warnings Unused function warnings
a904fc6d	2018-11-28T20:31:30	Merge pull request #4870 from libgit2/ethomson/proxy Add builtin proxy support for the http transport
30ac46aa	2018-11-28T10:12:43	http: reset replay_count upon connection Reset the replay_count upon a successful connection. It's possible that we could encounter a situation where we connect successfully but need to replay a request - for example, a connection and initial request succeeds without authentication but a subsequent call does require authentication. Reset the replay count upon any successful request to afford subsequent replays room to manuever.
02bb39f4	2018-11-22T08:49:09	stream registration: take an enum type Accept an enum (`git_stream_t`) during custom stream registration that indicates whether the registration structure should be used for standard (non-TLS) streams or TLS streams.
52478d7d	2018-11-18T19:54:49	http: don't allow SSL connections to a proxy Temporarily disallow SSL connections to a proxy until we can understand the valgrind warnings when tunneling OpenSSL over OpenSSL.
41f620d9	2018-11-18T19:10:50	http: only load proxy configuration during connection Only load the proxy configuration during connection; we need this data when we're going to connect to the server, however we may mutate it after connection (connecting through a CONNECT proxy means that we should send requests like normal). If we reload the proxy configuration but do not actually reconnect (because we're in a keep-alive session) then we will reload the proxy configuration that we should have mutated. Thus, only load the proxy configuration when we know that we're going to reconnect.
21142c5a	2018-10-29T10:04:48	http: remove cURL We previously used cURL to support HTTP proxies. Now that we've added this support natively, we can remove the curl dependency.
2878ad08	2018-10-29T08:59:33	streams: remove unused tls functions The implementations of git_openssl_stream_new and git_mbedtls_stream_new have callers protected by #ifdefs and are never called unless compiled in. There's no need for a dummy implementation. Remove them.
5d4e1e04	2018-10-28T21:27:56	http: use CONNECT to talk to proxies Natively support HTTPS connections through proxies by speaking CONNECT to the proxy and then adding a TLS connection on top of the socket.
43b592ac	2018-10-25T08:49:01	tls: introduce a wrap function Introduce `git_tls_stream_wrap` which will take an existing `stream` with an already connected socket and begin speaking TLS on top of it. This is useful if you've built a connection to a proxy server and you wish to begin CONNECT over it to tunnel a TLS connection. Also update the pluggable TLS stream layer so that it can accept a registration structure that provides an `init` and `wrap` function, instead of a single initialization function.
df2cc108	2018-11-18T10:29:07	stream: provide generic registration API Update the new stream registration API to be `git_stream_register` which takes a registration structure and a TLS boolean. This allows callers to register non-TLS streams as well as TLS streams. Provide `git_stream_register_tls` that takes just the init callback for backward compatibliity.
0467606f	2018-11-18T11:00:11	http: disallow repeated headers from servers Don't allow servers to send us multiple Content-Type, Content-Length or Location headers.
b2ed778a	2018-11-18T22:20:10	http transport: reset error message on cert failure Store the error message from the underlying TLS library before calling the certificate callback. If it refuses to act (demonstrated by returning GIT_PASSTHROUGH) then restore the error message. Otherwise, if the callback does not set an error message, set a sensible default that implicates the callback itself.
2ce2315c	2018-10-22T17:33:45	http transport: support cert check for proxies Refactor certificate checking so that it can easily be called for proxies or the remote server.
74c6e08e	2018-10-22T14:56:53	http transport: provide proxy credentials
496da38c	2018-10-22T12:48:45	http transport: refactor storage Create a simple data structure that contains information about the server being connected to, whether that's the actual remote endpoint (git server) or an intermediate proxy. This allows for organization of streams, authentication state, etc.
6af8572c	2018-10-22T11:29:01	http transport: cap number of authentication replays Put a limit on the number of authentication replays in the HTTP transport. Standardize on 7 replays for authentication or redirects, which matches the behavior of the WinHTTP transport.
22654812	2018-10-22T11:24:05	http transport: prompt for proxy credentials Teach the HTTP transport how to prompt for proxy credentials.
0328eef6	2018-10-22T11:14:06	http transport: further refactor credential handling Prepare credential handling to understand both git server and proxy server authentication.
32cb56ce	2018-10-22T10:16:54	http transport: refactor credential handling Factor credential handling into its own function. Additionally, add safety checks to ensure that we are in a valid state - that we have received a valid challenge from the server and that we have configuration to respond to that challenge.
e6e399ab	2018-10-22T09:49:54	http transport: use HTTP proxies when requested The HTTP transport should understand how to apply proxies when configured with `GIT_PROXY_SPECIFIED` and `GIT_PROXY_SPECIFIED`. When a proxy is configured, the HTTP transport will now connect to the proxy (instead of directly to the git server), and will request the properly-formed URL of the git server endpoint.
e6f1931a	2018-10-22T00:09:24	http: rename http subtransport's `io` to `gitserver_stream` Rename `http_subtransport->io` to `http_subtransport->gitserver_stream` to clarify its use, especially as we might have additional streams (eg for a proxy) in the future.
c07ff4cb	2018-10-21T14:17:06	http: rename `connection_data` -> `gitserver_data` Rename the `connection_data` struct member to `gitserver_data`, to disambiguate future `connection_data`s that apply to the proxy, not the final server endpoint.
ed72465e	2018-10-13T19:16:54	proxy: propagate proxy configuration errors
dcd00638	2018-11-28T14:45:55	Merge pull request #4898 from pks-t/pks/config-parent-is-file config: fix adding files if their parent directory is a file
f2f5ec84	2018-11-23T19:27:09	khash: move khash include into implementation files The current map implementations directly include the "khash.h" headers into their own headers to make available a set of static functions, defines et cetera. Besides leaking the complete khash namespace into files wherever khashes are used, this also triggers Clang's -Wunused-function warnings when some of the static functions are not being used at all. Fix the issue by moving the includes into the respective map implementation files. Add forward declares for all the map types to make them known.
852bc9f4	2018-11-23T19:26:24	khash: remove intricate knowledge of khash types Instead of using the `khiter_t`, `git_strmap_iter` and `khint_t` types, simply use `size_t` instead. This decouples code from the khash stuff and makes it possible to move the khash includes into the implementation files.
5bfb3b58	2018-11-23T18:48:40	khash: implement map-specific foreach macros The current foreach map macros simply redirect to the type-indifferent `kh_foreach` macro. As this type-indifferent macro directly accesses the structures, the current implementation makes it impossible to make the stuctures private to the implementation only. And making them private is required to move out the khash include into the implementations to decrease the namespace leak.
382b668b	2018-11-23T18:38:18	khash: implement begin/end via functions instead of macros Right now, the `git_map_begin()` and `git_map_end()` helpers are implemented via macros which simply redirect to `kh_begin` and `kh_end`. As these macros refer to members of the map structures, they make it impossible to move the khash include into the implementation files. Implement these helpers as real functions instead to further decouple the headers from implementations.
ae765d00	2018-11-23T19:26:48	submodule: remove string map implementation that strips trailing slashes The submodule code currently has its own implementation of a string map, which overrides the hashing and hash equals functions with functions that ignore potential trailing slashes. These functions aren't actually used by our code, making them useless.
02789782	2018-11-23T18:37:57	idxmap: remove unused foreach macros The foreach macros of the idxmap types are not used anywhere. As we are about to open-code all foreach macros for the maps in order to be able to make the khash structure internal, removing these unused macros will leave a few places less that need conversion.
b2af13f2	2018-11-21T12:07:23	iterator: remove unused function `tree_iterator_entry_cmp` The function `tree_iterator_entry_cmp` has been introduced in commit be30387e8 (iterators: refactored tree iterator, 2016-02-25), but in fact it has never been used at all. Remove it to avoid unused function warnings as soon as we re-enable "-Wunused-functions".
0836f069	2018-11-14T16:08:30	revwalk: Allow changing hide_cb Since git_revwalk objects are encouraged to be reused, a public interface for changing hide_cb is desirable.
c97d302d	2018-11-28T13:45:41	Merge pull request #4879 from libgit2/ethomson/defer_cert_cred_cb Allow certificate and credential callbacks to decline to act
43cbe6b7	2018-11-28T13:36:47	config: fix adding files if their parent directory is a file When we try to add a configuration file with `git_config_add_file_ondisk`, we treat nonexisting files as empty. We do this by performing a stat call, ignoring ENOENT errors. This works just fine in case the file or any of its parents simply does not exist, but there is also the case where any of the parent directories is not a directory, but a file. So e.g. trying to add a configuration file "/dev/null/.gitconfig" will fail, as `errno` will be ENOTDIR instead of ENOENT. Catch ENOTDIR in addition to ENOENT to fix the issue. Add a test that verifies we are able to add configuration files with such an invalid path file just fine.
f0714daf	2018-11-25T13:36:29	Fix warning C4133 incompatible types in MSVC Introduced in commit b433a22a979ae78c28c8b16f8c3487e2787cb73e. Signed-off-by: Sven Strickroth <email@cs-ware.de>
a2e6e0ea	2018-11-06T14:15:43	transport: allow cred/cert callbacks to return GIT_PASSTHROUGH Allow credential and certificate checking callbacks to return GIT_PASSTHROUGH, indicating that they do not want to act. Introduce this to support in both the http and ssh callbacks. Additionally, enable the same mechanism for certificate validation. This is most useful to disambiguate any meaning in the publicly exposed credential and certificate functions (`git_transport_smart_credentials` and `git_transport_smart_certificate_check`) but it may be more generally useful for callers to be able to defer back to libgit2.
0e3e832d	2018-11-21T13:30:01	Merge pull request #4884 from libgit2/ethomson/index_iterator index: introduce git_index_iterator
cb23c3ef	2018-11-21T10:54:29	commit: fix out-of-bound reads when parsing truncated author fields While commit objects usually should have only one author field, our commit parser actually handles the case where a commit has multiple author fields because some tools that exist in the wild actually write them. Detection of those additional author fields is done by using a simple `git__prefixcmp`, checking whether the current line starts with the string "author ". In case where we are handed a non-NUL-terminated string that ends directly after the space, though, we may have an out-of-bounds read of one byte when trying to compare the expected final NUL byte. Fix the issue by using `git__prefixncmp` instead of `git_prefixcmp`. Unfortunately, a test cannot be easily written to catch this case. While we could test the last error message and verify that it didn't in fact fail parsing a signature (because that would indicate that it has in fact tried to parse the additional "author " field, which it shouldn't be able to detect in the first place), this doesn't work as the next line needs to be the "committer" field, which would error out with the same error message even if we hadn't done an out-of-bounds read. As objects read from the object database are always NUL terminated, this issue cannot be triggered in normal code and thus it's not security critical.
11d33df8	2018-11-18T23:39:43	Merge branch 'tiennou/fix/logallrefupdates-always'
e226ad8f	2018-11-17T17:55:10	refs: add support for core.logAllRefUpdates=always Since we were not expecting this config entry to contain a string, we would fail as soon as its (cached) value would be accessed. Hence, provide some constants for the 4 states we use, and account for "always" when we decide to reflog changes.
646a94be	2018-11-18T23:15:56	Merge pull request #4847 from noahp/noahp/null-arg-fixes tests: 🌀 address two null argument instances
5c213e29	2018-11-18T22:59:03	Merge pull request #4875 from tiennou/fix/openssl-errors Some OpenSSL issues
4ef2b889	2018-11-18T22:56:28	Merge pull request #4882 from kc8apf/include_port_in_host_header transport/http: Include non-default ports in Host header
7321cff0	2018-11-15T09:17:51	Merge pull request #4713 from libgit2/ethomson/win_symlinks Support symlinks on Windows when core.symlinks=true
8ee10098	2018-11-06T13:10:30	transport: see if cert/cred callbacks exist before calling them Custom transports may want to ask libgit2 to invoke a configured credential or certificate callback; however they likely do not know if a callback was actually configured. Return a sentinal value (GIT_PASSTHROUGH) if there is no callback configured instead of crashing.
c358bbc5	2018-11-12T17:22:47	index: introduce git_index_iterator Provide a public git_index_iterator API that is backed by an index snapshot. This allows consumers to provide a stable iteration even while manipulating the index during iteration.
4b84db6a	2018-11-14T12:33:38	patch_parse: remove unused function `parse_number` The function `parse_number` was replaced by `git_parse_advance_digit` which is provided by the parser interface in commit 252f2eeee (parse: implement and use `git_parse_advance_digit`, 2017-07-14). As there are no remaining callers, remove it.
4209a512	2018-11-14T12:04:42	strntol: fix out-of-bounds reads when parsing numbers with leading sign When parsing a number, we accept a leading plus or minus sign to return a positive or negative number. When the parsed string has such a leading sign, we set up a flag indicating that the number is negative and advance the pointer to the next character in that string. This misses updating the number of bytes in the string, though, which is why the parser may later on do an out-of-bounds read. Fix the issue by correctly updating both the pointer and the number of remaining bytes. Furthermore, we need to check whether we actually have any bytes left after having advanced the pointer, as otherwise the auto-detection of the base may do an out-of-bonuds access. Add a test that detects the out-of-bound read. Note that this is not actually security critical. While there are a lot of places where the function is called, all of these places are guarded or irrelevant: - commit list: this operates on objects from the ODB, which are always NUL terminated any may thus not trigger the off-by-one OOB read. - config: the configuration is NUL terminated. - curl stream: user input is being parsed that is always NUL terminated - index: the index is read via `git_futils_readbuffer`, which always NUL terminates it. - loose objects: used to parse the length from the object's header. As we check previously that the buffer contains a NUL byte, this is safe. - rebase: this parses numbers from the rebase instruction sheet. As the rebase code uses `git_futils_readbuffer`, the buffer is always NUL terminated. - revparse: this parses a user provided buffer that is NUL terminated. - signature: this parser the header information of objects. As objects read from the ODB are always NUL terminated, this is a non-issue. The constructor `git_signature_from_buffer` does not accept a length parameter for the buffer, so the buffer needs to be NUL terminated, as well. - smart transport: the buffer that is parsed is NUL terminated - tree cache: this parses the tree cache from the index extension. The index itself is read via `git_futils_readbuffer`, which always NUL terminates it. - winhttp transport: user input is being parsed that is always NUL terminated
cf83809b	2018-11-13T14:26:26	Merge pull request #4883 from pks-t/pks/signature-tz-oob signature: fix out-of-bounds read when parsing timezone offset
f127ce35	2018-11-13T08:22:25	tests: address two null argument instances Handle two null argument cases that occur in the unit tests. One is in library code, the other is in test code. Detected by running unit tests with undefined behavior sanitizer: ```bash # build mkdir build && cd build cmake -DBUILD_CLAR=ON -DCMAKE_C_FLAGS="-fsanitize=address \ -fsanitize=undefined -fstack-usage -static-libasan" .. cmake --build . # run with asan ASAN_OPTIONS="allocator_may_return_null=1" ./libgit2_clar ... ............../libgit2/src/apply.c:316:3: runtime error: null pointer \ passed as argument 1, which is declared to never be null ...................../libgit2/tests/apply/fromfile.c:46:3: runtime \ error: null pointer passed as argument 1, which is declared to never be null ```
20cb30b6	2018-11-13T13:40:17	Merge pull request #4667 from tiennou/feature/remote-create-api Remote creation API
28239be3	2018-11-13T13:27:41	Merge pull request #4818 from pks-t/pks/index-collision Index collision fixes
11fbead8	2018-11-11T16:40:56	Merge pull request #4705 from libgit2/ethomson/apply Patch (diff) application
83b35181	2018-10-19T10:54:38	transport/http: Include non-default ports in Host header When the port is omitted, the server assumes the default port for the service is used (see https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Host). In cases where the client provided a non-default port, it should be passed along. This hasn't been an issue so far as the git protocol doesn't include server-generated URIs. I encountered this when implementing Rust registry support for Sonatype Nexus. Rust's registry uses a git repository for the package index. Clients look at a file in the root of the package index to find the base URL for downloading the packages. Sonatype Nexus looks at the incoming HTTP request (Host header and URL) to determine the client-facing URL base as it may be running behind a load balancer or reverse proxy. This client-facing URL base is then used to construct the package download base URL. When libgit2 fetches the index from Nexus on a non-default port, Nexus trusts the incorrect Host header and generates an incorrect package download base URL.
58b60fcc	2018-11-08T09:31:28	netops: add method to return default http port for a connection Constant strings and logic for HTTP(S) default ports were starting to be spread throughout netops.c. Instead of duplicating this again to determine if a Host header should include the port, move the default port constants and logic into an internal method in netops.{c,h}.
52f859fd	2018-11-09T19:32:08	signature: fix out-of-bounds read when parsing timezone offset When parsing a signature's timezone offset, we first check whether there is a timezone at all by verifying that there are still bytes left to read following the time itself. The check thus looks like `time_end + 1 < buffer_end`, which is actually correct in this case. After setting the timezone's start pointer to that location, we compute the remaining bytes by using the formula `buffer_end - tz_start + 1`, re-using the previous `time_end + 1`. But this is in fact missing the braces around `(tz_start + 1)`, thus leading to an overestimation of the remaining bytes by a length of two. In case of a non-NUL terminated buffer, this will result in an overflow. The function `git_signature__parse` is only used in two locations. First is `git_signature_from_buffer`, which only accepts a string without a length. The string thus necessarily has to be NUL terminated and cannot trigger the issue. The other function is `git_commit__parse_raw`, which can in fact trigger the error as it may receive non-NUL terminated commit data. But as objects read from the ODB are always NUL-terminated by us as a cautionary measure, it cannot trigger the issue either. In other words, this error does not have any impact on security.
9ad96367	2018-11-07T15:31:21	smart transport: only clear url on hard reset After creating a transport for a server, we expect to be able to call `connect`, then invoke subsequent `action` calls. We provide the URL to these `action` calls, although our built-in transports happen to ignore it since they've already parsed it into an internal format that they intend to use (`gitno_connection_data`). In ca2eb4608243162a13c427e74526b6422d5a6659, we began clearing the URL field after a connection, meaning that subsequent calls to transport `action` callbacks would get a NULL URL, which went undetected since the builtin transports ignore the URL when they're already connected (instead of re-parsing it into an internal format). Downstream custom transport implementations (eg, LibGit2Sharp) did notice this change, however. Since `reset_stream` is called even when we're not closing the subtransport, update to only clear the URL when we're closing the subtransport. This ensures that `action` calls will get the correct URL information even after a connection.
f8b9493b	2018-11-05T15:46:08	apply: test re-adding a file after removing it Ensure that we can add a file back after it's been removed. Update the renamed/deleted validation in application to not apply to deltas that are adding files to support this.
78580ad3	2018-11-05T15:34:59	apply: test modifying a file after renaming it Ensure that we cannot modify a file after it's been renamed out of the way. If multiple deltas exist for a single path, ensure that we do not attempt to modify a file after it's been renamed out of the way. To support this, we must track the paths that have been removed or renamed; add to a string map when we remove a path and remove from the string map if we recreate a path. Validate that we are not applying to a path that is in this map, unless the delta is a rename, since git supports renaming one file to two different places in two different deltas. Further, test that we cannot apply a modification delta to a path that will be created in the future by a rename (a path that does not yet exist.)
df4258ad	2018-11-04T13:01:03	apply: handle multiple deltas to the same file git allows a patch file to contain multiple deltas to the same file: although it does not produce files in this format itself, this could be the result of concatenating two different patch files that affected the same file. git apply behaves by applying this next delta to the existing postimage of the file. We should do the same. If we have previously seen a file, and produced a postimage for it, we will load that postimage and apply the current delta to that. If we have not, get the file from the preimage.
6fecf4d1	2018-11-04T11:47:46	apply: handle exact renames Deltas containing exact renames are special; they simple indicate that a file was renamed without providing additional metadata (like the filemode). Teach the reader to provide the file mode and use the preimage's filemode in the case that the delta does not provide one.)
12f9ac17	2018-11-04T11:26:42	apply: validate unchanged mode when applying both When applying to both the index and the working directory, ensure that the working directory's mode matches the index's mode. It's not sufficient to look only at the hashed object id to determine that the file is unchanged, git also takes the mode into account.
52e27b84	2018-10-10T12:42:54	reader: free is unused and unnecessary None of the reader implementations actually allocate anything themselves, so they don't need a free function. Remove it.
47cc5f85	2018-09-29T19:32:51	apply: introduce a hunk callback Introduce a callback to patch application that allows consumers to cancel hunk application.
af33210b	2018-07-10T16:10:03	apply: introduce a delta callback Introduce a callback to the application options that allow callers to add a per-delta callback. The callback can return an error code to stop patch application, or can return a value to skip the application of a particular delta.
37b25ac5	2018-07-08T16:12:58	apply: move location to an argument, not the opts Move the location option to an argument, out of the options structure. This allows the options structure to be re-used for functions that don't need to know the location, since it's implicit in their functionality. For example, `git_apply_tree` should not take a location, but is expected to take all the other options.
9be89bbd	2018-07-01T11:08:26	reader: apply working directory filters When reading a file from the working directory, ensure that we apply any necessary filters to the item. This ensures that we get the repository-normalized data as the preimage, and further ensures that we can accurately compare the working directory contents to the index contents for accurate safety validation in the `BOTH` case.
813f0802	2018-07-01T15:14:36	apply: validate workdir contents match index for BOTH When applying to both the index and the working directory, ensure that the index contents match the working directory. This mirrors the requirement in `git apply --index`. This also means that - along with the prior commit that uses the working directory contents as the checkout baseline - we no longer expect conflicts during checkout. So remove the special-case error handling for checkout conflicts. (Any checkout conflict now would be because the file was actually modified between the start of patch application and the checkout.)
0f4b2f02	2018-07-01T15:13:50	reader: optionally validate index matches workdir When using a workdir reader, optionally validate that the index contents match the working directory contents.
2d27ddc0	2018-07-01T21:35:51	apply: use an indexwriter Place the entire `git_apply` operation inside an indexwriter, so that we lock the index before we begin performing patch application. This ensures that there are no other processes modifying things in the working directory.
5b8d5a22	2018-07-01T13:42:53	apply: use preimage as the checkout baseline Use the preimage as the checkout's baseline. This allows us to support applying patches to files that are modified in the working directory (those that differ from the HEAD and index). Without this, files will be reported as (checkout) conflicts. With this, we expect the on-disk data when we began the patch application (the "preimage") to be on-disk during checkout. We could have also simply used the `FORCE` flag to checkout to accomplish a similar mechanism. However, `FORCE` ignores all differences, while providing a preimage ensures that we will only overwrite the file contents that we actually read. Modify the reader interface to provide the OID to support this.
dddfff77	2018-06-30T17:12:16	apply: convert checkout conflicts to apply failures When there's a checkout conflict during apply, that means that the working directory was modified in a conflicting manner and the postimage cannot be written. During application, convert this to an application failure for consistency across workdir/index/both applications.
5b66b667	2018-06-29T12:39:41	apply: when preimage file is missing, return EAPPLYFAIL The preimage file being missing entirely is simply a case of an application failure; return the correct error value for the caller.
e0224121	2018-06-29T12:09:02	apply: simplify checkout vs index application Separate the concerns of applying via checkout and updating the repository's index. This results in simpler functionality and allows us to not build the temporary collection of paths in the index case.
20f8a6db	2018-06-28T17:26:21	apply: remove deleted paths from index We update the index with the new_file side of the delta, but we need to explicitly remove the old_file path in the case where an item was deleted or renamed.
c3077ea0	2018-06-25T21:24:49	apply: return a specific exit code on failure Return `GIT_EAPPLYFAIL` on patch application failure so that users can determine that patch application failed due to a malformed/conflicting patch by looking at the error code.
d54aa9ae	2018-06-26T15:25:30	iterator: introduce `git_iterator_foreach` Introduce a `git_iterator_foreach` helper function which invokes a callback on all files for a given iterator.
9c34c996	2018-06-25T17:03:14	apply: handle file additions Don't attempt to read the postimage file during a file addition, simply use an empty buffer as the postimage. Also, test that we can handle file additions.
3b5378c5	2018-06-25T16:27:06	apply: handle file deletions If the file was deleted in the postimage, do not attempt to update the target. Instead, ignore it and simply allow it to stay removed in our computed postimage. Also, test that we can handle file deletions.
f83bbe0a	2018-03-19T19:50:45	apply: introduce `git_apply` Introduce `git_apply`, which will take a `git_diff` and apply it to the working directory (akin to `git apply`), the index (akin to `git apply --cached`), or both (akin to `git apply --index`).
664cda6f	2018-03-19T20:10:38	apply: reimplement `git_apply_tree` with readers The generic `git_reader` interface simplifies `git_apply_tree` somewhat. Reimplement `git_apply_tree` with them.
d73043a2	2018-03-19T20:10:31	reader: a generic way to read files from repos Similar to the `git_iterator` interface, the `git_reader` interface will allow us to read file contents from an arbitrary repository-backed data source (trees, index, or working directory).
02b1083a	2018-01-28T23:25:07	apply: introduce `git_apply_tree` Introduce `git_apply_tree`, which will apply a `git_diff` to a given `git_tree`, allowing an in-memory patch application for a repository.
2b12dcf6	2018-03-19T19:45:11	iterator: optionally hash filesystem iterators Optionally hash the contents of files encountered in the filesystem or working directory iterators. This is not expected to be used in production code paths, but may allow us to simplify some test contexts. For working directory iterators, apply filters as appropriate, since we have the context able to do it.
37acffac	2018-10-08T20:51:20	remote: remove static create_internal function
10cba764	2018-07-06T21:58:34	remote: lower the default vector size to 8 As it is, this is space for 32 refs pointers, which feels a little much. Lower it to 8, as it is the minimum vector size anyway.

8dde7e11

2018-12-19T11:04:58

refdb_fs: refactor error handling in `refdb_reflog_fs__delete` The function `refdb_reflog_fs__delete` uses the `if (!error && foobar())` pattern of checking, where error conditions are being checked by following calls to different code. This does not match our current style, where the call-site of a function is usually directly responsible for checking the return value. Convert the function to use `if ((error = foobar()) < 0) goto out;` style. Note that this changes the code flow a bit: previously, we were always trying to delete empty reference hierarchies even if deleting the reflog entry has failed. This wasn't much of a problem -- if deletion failed, the hierarchy will still contain at least one file and thus the function call was an expensive no-op. Now, we will only perform this deletion if we have successfully removed the reflog.

bc219657

2018-12-19T11:01:55

Merge pull request #4833 from csware/drop-empty-dirs Remove empty (sub-)directories when deleting refs

6ea9381b

2018-12-14T14:43:09

annotated_commit: peel to commit instead of assuming we have one We want to allow the creation of annotated commits out of annotated tags and for that we have to peel the reference all the way to the commit instead of stopping at the first id it provides.

5bd78c48

2018-12-14T14:41:17

refs: constify git_reference_peel We have no need to take a non-const reference. This does involve some other work to make sure we don't mix const and non-const variables, but by splitting what we want each variable to do we can also simplify the logic for when we do want to free a new reference we might have allocated.

da8138b0

2018-12-06T12:59:17

Merge pull request #4906 from QBobWatson/bugfix Fix segfault in loose_backend__readstream

2f3c4b69

2018-12-06T10:48:20

Typesetting conventions

f4835e44

2018-12-04T21:48:12

make proxy_stream_close close target stream even on errors When git_filter_apply_fn callback returns a error while smudging proxy_stream_close ends up returning without closing the stream. This is turn makes blob_content_to_file crash as it asserts the stream being closed whether there are errors or not. Closing the target stream on error fixes this problem.

08afdb57

2018-12-04T10:59:25

Removed one null check

36f80742

2018-12-04T10:12:24

Fix segfault in loose_backend__readstream If the routine exits with error before stream or hash_ctx is initialized, the program will segfault when trying to free them.

168fe39b

2018-11-28T14:26:57

object_type: use new enumeration names Use the new object_type enumeration names within the codebase.

18e71e6d

2018-11-28T13:31:06

index: use new enum and structure names Use the new-style index names throughout our own codebase.

0ddc6094

2018-11-30T09:46:14

Merge pull request #4770 from tiennou/feature/merge-analysis-any-branch Allow merge analysis against any reference

e7873eb2

2018-11-29T08:00:31

Merge pull request #4888 from TheBB/add-cb revwalk: Allow changing hide_cb

487233fa

2018-11-29T07:21:41

Merge pull request #4895 from pks-t/pks/unused-warnings Unused function warnings

a904fc6d

2018-11-28T20:31:30

Merge pull request #4870 from libgit2/ethomson/proxy Add builtin proxy support for the http transport

30ac46aa

2018-11-28T10:12:43

http: reset replay_count upon connection Reset the replay_count upon a successful connection. It's possible that we could encounter a situation where we connect successfully but need to replay a request - for example, a connection and initial request succeeds without authentication but a subsequent call does require authentication. Reset the replay count upon any successful request to afford subsequent replays room to manuever.

02bb39f4

2018-11-22T08:49:09

stream registration: take an enum type Accept an enum (`git_stream_t`) during custom stream registration that indicates whether the registration structure should be used for standard (non-TLS) streams or TLS streams.

52478d7d

2018-11-18T19:54:49

http: don't allow SSL connections to a proxy Temporarily disallow SSL connections to a proxy until we can understand the valgrind warnings when tunneling OpenSSL over OpenSSL.

41f620d9

2018-11-18T19:10:50

http: only load proxy configuration during connection Only load the proxy configuration during connection; we need this data when we're going to connect to the server, however we may mutate it after connection (connecting through a CONNECT proxy means that we should send requests like normal). If we reload the proxy configuration but do not actually reconnect (because we're in a keep-alive session) then we will reload the proxy configuration that we should have mutated. Thus, only load the proxy configuration when we know that we're going to reconnect.

21142c5a

2018-10-29T10:04:48

http: remove cURL We previously used cURL to support HTTP proxies. Now that we've added this support natively, we can remove the curl dependency.

2878ad08

2018-10-29T08:59:33

streams: remove unused tls functions The implementations of git_openssl_stream_new and git_mbedtls_stream_new have callers protected by #ifdefs and are never called unless compiled in. There's no need for a dummy implementation. Remove them.

5d4e1e04

2018-10-28T21:27:56

http: use CONNECT to talk to proxies Natively support HTTPS connections through proxies by speaking CONNECT to the proxy and then adding a TLS connection on top of the socket.

43b592ac

2018-10-25T08:49:01

tls: introduce a wrap function Introduce `git_tls_stream_wrap` which will take an existing `stream` with an already connected socket and begin speaking TLS on top of it. This is useful if you've built a connection to a proxy server and you wish to begin CONNECT over it to tunnel a TLS connection. Also update the pluggable TLS stream layer so that it can accept a registration structure that provides an `init` and `wrap` function, instead of a single initialization function.

df2cc108

2018-11-18T10:29:07

stream: provide generic registration API Update the new stream registration API to be `git_stream_register` which takes a registration structure and a TLS boolean. This allows callers to register non-TLS streams as well as TLS streams. Provide `git_stream_register_tls` that takes just the init callback for backward compatibliity.

0467606f

2018-11-18T11:00:11

http: disallow repeated headers from servers Don't allow servers to send us multiple Content-Type, Content-Length or Location headers.

b2ed778a

2018-11-18T22:20:10

http transport: reset error message on cert failure Store the error message from the underlying TLS library before calling the certificate callback. If it refuses to act (demonstrated by returning GIT_PASSTHROUGH) then restore the error message. Otherwise, if the callback does not set an error message, set a sensible default that implicates the callback itself.

2ce2315c

2018-10-22T17:33:45

http transport: support cert check for proxies Refactor certificate checking so that it can easily be called for proxies or the remote server.

74c6e08e

2018-10-22T14:56:53

http transport: provide proxy credentials

496da38c

2018-10-22T12:48:45

http transport: refactor storage Create a simple data structure that contains information about the server being connected to, whether that's the actual remote endpoint (git server) or an intermediate proxy. This allows for organization of streams, authentication state, etc.

6af8572c

2018-10-22T11:29:01

http transport: cap number of authentication replays Put a limit on the number of authentication replays in the HTTP transport. Standardize on 7 replays for authentication or redirects, which matches the behavior of the WinHTTP transport.

22654812

2018-10-22T11:24:05

http transport: prompt for proxy credentials Teach the HTTP transport how to prompt for proxy credentials.

0328eef6

2018-10-22T11:14:06

http transport: further refactor credential handling Prepare credential handling to understand both git server and proxy server authentication.

32cb56ce

2018-10-22T10:16:54

http transport: refactor credential handling Factor credential handling into its own function. Additionally, add safety checks to ensure that we are in a valid state - that we have received a valid challenge from the server and that we have configuration to respond to that challenge.

e6e399ab

2018-10-22T09:49:54

http transport: use HTTP proxies when requested The HTTP transport should understand how to apply proxies when configured with `GIT_PROXY_SPECIFIED` and `GIT_PROXY_SPECIFIED`. When a proxy is configured, the HTTP transport will now connect to the proxy (instead of directly to the git server), and will request the properly-formed URL of the git server endpoint.

e6f1931a

2018-10-22T00:09:24

http: rename http subtransport's `io` to `gitserver_stream` Rename `http_subtransport->io` to `http_subtransport->gitserver_stream` to clarify its use, especially as we might have additional streams (eg for a proxy) in the future.

c07ff4cb

2018-10-21T14:17:06

http: rename `connection_data` -> `gitserver_data` Rename the `connection_data` struct member to `gitserver_data`, to disambiguate future `connection_data`s that apply to the proxy, not the final server endpoint.

ed72465e

2018-10-13T19:16:54

proxy: propagate proxy configuration errors

dcd00638

2018-11-28T14:45:55

Merge pull request #4898 from pks-t/pks/config-parent-is-file config: fix adding files if their parent directory is a file

f2f5ec84

2018-11-23T19:27:09

khash: move khash include into implementation files The current map implementations directly include the "khash.h" headers into their own headers to make available a set of static functions, defines et cetera. Besides leaking the complete khash namespace into files wherever khashes are used, this also triggers Clang's -Wunused-function warnings when some of the static functions are not being used at all. Fix the issue by moving the includes into the respective map implementation files. Add forward declares for all the map types to make them known.

852bc9f4

2018-11-23T19:26:24

khash: remove intricate knowledge of khash types Instead of using the `khiter_t`, `git_strmap_iter` and `khint_t` types, simply use `size_t` instead. This decouples code from the khash stuff and makes it possible to move the khash includes into the implementation files.

5bfb3b58

2018-11-23T18:48:40

khash: implement map-specific foreach macros The current foreach map macros simply redirect to the type-indifferent `kh_foreach` macro. As this type-indifferent macro directly accesses the structures, the current implementation makes it impossible to make the stuctures private to the implementation only. And making them private is required to move out the khash include into the implementations to decrease the namespace leak.

382b668b

2018-11-23T18:38:18

khash: implement begin/end via functions instead of macros Right now, the `git_*map_begin()` and `git_*map_end()` helpers are implemented via macros which simply redirect to `kh_begin` and `kh_end`. As these macros refer to members of the map structures, they make it impossible to move the khash include into the implementation files. Implement these helpers as real functions instead to further decouple the headers from implementations.

ae765d00

2018-11-23T19:26:48

submodule: remove string map implementation that strips trailing slashes The submodule code currently has its own implementation of a string map, which overrides the hashing and hash equals functions with functions that ignore potential trailing slashes. These functions aren't actually used by our code, making them useless.

02789782

2018-11-23T18:37:57

idxmap: remove unused foreach macros The foreach macros of the idxmap types are not used anywhere. As we are about to open-code all foreach macros for the maps in order to be able to make the khash structure internal, removing these unused macros will leave a few places less that need conversion.

b2af13f2

2018-11-21T12:07:23

iterator: remove unused function `tree_iterator_entry_cmp` The function `tree_iterator_entry_cmp` has been introduced in commit be30387e8 (iterators: refactored tree iterator, 2016-02-25), but in fact it has never been used at all. Remove it to avoid unused function warnings as soon as we re-enable "-Wunused-functions".

0836f069

2018-11-14T16:08:30

revwalk: Allow changing hide_cb Since git_revwalk objects are encouraged to be reused, a public interface for changing hide_cb is desirable.

c97d302d

2018-11-28T13:45:41

Merge pull request #4879 from libgit2/ethomson/defer_cert_cred_cb Allow certificate and credential callbacks to decline to act

43cbe6b7

2018-11-28T13:36:47

config: fix adding files if their parent directory is a file When we try to add a configuration file with `git_config_add_file_ondisk`, we treat nonexisting files as empty. We do this by performing a stat call, ignoring ENOENT errors. This works just fine in case the file or any of its parents simply does not exist, but there is also the case where any of the parent directories is not a directory, but a file. So e.g. trying to add a configuration file "/dev/null/.gitconfig" will fail, as `errno` will be ENOTDIR instead of ENOENT. Catch ENOTDIR in addition to ENOENT to fix the issue. Add a test that verifies we are able to add configuration files with such an invalid path file just fine.

f0714daf

2018-11-25T13:36:29

Fix warning C4133 incompatible types in MSVC Introduced in commit b433a22a979ae78c28c8b16f8c3487e2787cb73e. Signed-off-by: Sven Strickroth <email@cs-ware.de>

a2e6e0ea

2018-11-06T14:15:43

transport: allow cred/cert callbacks to return GIT_PASSTHROUGH Allow credential and certificate checking callbacks to return GIT_PASSTHROUGH, indicating that they do not want to act. Introduce this to support in both the http and ssh callbacks. Additionally, enable the same mechanism for certificate validation. This is most useful to disambiguate any meaning in the publicly exposed credential and certificate functions (`git_transport_smart_credentials` and `git_transport_smart_certificate_check`) but it may be more generally useful for callers to be able to defer back to libgit2.

0e3e832d

2018-11-21T13:30:01

Merge pull request #4884 from libgit2/ethomson/index_iterator index: introduce git_index_iterator

cb23c3ef

2018-11-21T10:54:29

commit: fix out-of-bound reads when parsing truncated author fields While commit objects usually should have only one author field, our commit parser actually handles the case where a commit has multiple author fields because some tools that exist in the wild actually write them. Detection of those additional author fields is done by using a simple `git__prefixcmp`, checking whether the current line starts with the string "author ". In case where we are handed a non-NUL-terminated string that ends directly after the space, though, we may have an out-of-bounds read of one byte when trying to compare the expected final NUL byte. Fix the issue by using `git__prefixncmp` instead of `git_prefixcmp`. Unfortunately, a test cannot be easily written to catch this case. While we could test the last error message and verify that it didn't in fact fail parsing a signature (because that would indicate that it has in fact tried to parse the additional "author " field, which it shouldn't be able to detect in the first place), this doesn't work as the next line needs to be the "committer" field, which would error out with the same error message even if we hadn't done an out-of-bounds read. As objects read from the object database are always NUL terminated, this issue cannot be triggered in normal code and thus it's not security critical.

11d33df8

2018-11-18T23:39:43

Merge branch 'tiennou/fix/logallrefupdates-always'

e226ad8f

2018-11-17T17:55:10

refs: add support for core.logAllRefUpdates=always Since we were not expecting this config entry to contain a string, we would fail as soon as its (cached) value would be accessed. Hence, provide some constants for the 4 states we use, and account for "always" when we decide to reflog changes.

646a94be

2018-11-18T23:15:56

Merge pull request #4847 from noahp/noahp/null-arg-fixes tests: 🌀 address two null argument instances

5c213e29

2018-11-18T22:59:03

Merge pull request #4875 from tiennou/fix/openssl-errors Some OpenSSL issues

4ef2b889

2018-11-18T22:56:28

Merge pull request #4882 from kc8apf/include_port_in_host_header transport/http: Include non-default ports in Host header

7321cff0

2018-11-15T09:17:51

Merge pull request #4713 from libgit2/ethomson/win_symlinks Support symlinks on Windows when core.symlinks=true

8ee10098

2018-11-06T13:10:30

transport: see if cert/cred callbacks exist before calling them Custom transports may want to ask libgit2 to invoke a configured credential or certificate callback; however they likely do not know if a callback was actually configured. Return a sentinal value (GIT_PASSTHROUGH) if there is no callback configured instead of crashing.

c358bbc5

2018-11-12T17:22:47

index: introduce git_index_iterator Provide a public git_index_iterator API that is backed by an index snapshot. This allows consumers to provide a stable iteration even while manipulating the index during iteration.

4b84db6a

2018-11-14T12:33:38

patch_parse: remove unused function `parse_number` The function `parse_number` was replaced by `git_parse_advance_digit` which is provided by the parser interface in commit 252f2eeee (parse: implement and use `git_parse_advance_digit`, 2017-07-14). As there are no remaining callers, remove it.

4209a512

2018-11-14T12:04:42

strntol: fix out-of-bounds reads when parsing numbers with leading sign When parsing a number, we accept a leading plus or minus sign to return a positive or negative number. When the parsed string has such a leading sign, we set up a flag indicating that the number is negative and advance the pointer to the next character in that string. This misses updating the number of bytes in the string, though, which is why the parser may later on do an out-of-bounds read. Fix the issue by correctly updating both the pointer and the number of remaining bytes. Furthermore, we need to check whether we actually have any bytes left after having advanced the pointer, as otherwise the auto-detection of the base may do an out-of-bonuds access. Add a test that detects the out-of-bound read. Note that this is not actually security critical. While there are a lot of places where the function is called, all of these places are guarded or irrelevant: - commit list: this operates on objects from the ODB, which are always NUL terminated any may thus not trigger the off-by-one OOB read. - config: the configuration is NUL terminated. - curl stream: user input is being parsed that is always NUL terminated - index: the index is read via `git_futils_readbuffer`, which always NUL terminates it. - loose objects: used to parse the length from the object's header. As we check previously that the buffer contains a NUL byte, this is safe. - rebase: this parses numbers from the rebase instruction sheet. As the rebase code uses `git_futils_readbuffer`, the buffer is always NUL terminated. - revparse: this parses a user provided buffer that is NUL terminated. - signature: this parser the header information of objects. As objects read from the ODB are always NUL terminated, this is a non-issue. The constructor `git_signature_from_buffer` does not accept a length parameter for the buffer, so the buffer needs to be NUL terminated, as well. - smart transport: the buffer that is parsed is NUL terminated - tree cache: this parses the tree cache from the index extension. The index itself is read via `git_futils_readbuffer`, which always NUL terminates it. - winhttp transport: user input is being parsed that is always NUL terminated

cf83809b

2018-11-13T14:26:26

Merge pull request #4883 from pks-t/pks/signature-tz-oob signature: fix out-of-bounds read when parsing timezone offset

f127ce35

2018-11-13T08:22:25

tests: address two null argument instances Handle two null argument cases that occur in the unit tests. One is in library code, the other is in test code. Detected by running unit tests with undefined behavior sanitizer: ```bash # build mkdir build && cd build cmake -DBUILD_CLAR=ON -DCMAKE_C_FLAGS="-fsanitize=address \ -fsanitize=undefined -fstack-usage -static-libasan" .. cmake --build . # run with asan ASAN_OPTIONS="allocator_may_return_null=1" ./libgit2_clar ... ............../libgit2/src/apply.c:316:3: runtime error: null pointer \ passed as argument 1, which is declared to never be null ...................../libgit2/tests/apply/fromfile.c:46:3: runtime \ error: null pointer passed as argument 1, which is declared to never be null ```

20cb30b6

2018-11-13T13:40:17

Merge pull request #4667 from tiennou/feature/remote-create-api Remote creation API

28239be3

2018-11-13T13:27:41

Merge pull request #4818 from pks-t/pks/index-collision Index collision fixes

11fbead8

2018-11-11T16:40:56

Merge pull request #4705 from libgit2/ethomson/apply Patch (diff) application

83b35181

2018-10-19T10:54:38

transport/http: Include non-default ports in Host header When the port is omitted, the server assumes the default port for the service is used (see https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Host). In cases where the client provided a non-default port, it should be passed along. This hasn't been an issue so far as the git protocol doesn't include server-generated URIs. I encountered this when implementing Rust registry support for Sonatype Nexus. Rust's registry uses a git repository for the package index. Clients look at a file in the root of the package index to find the base URL for downloading the packages. Sonatype Nexus looks at the incoming HTTP request (Host header and URL) to determine the client-facing URL base as it may be running behind a load balancer or reverse proxy. This client-facing URL base is then used to construct the package download base URL. When libgit2 fetches the index from Nexus on a non-default port, Nexus trusts the incorrect Host header and generates an incorrect package download base URL.

58b60fcc

2018-11-08T09:31:28

netops: add method to return default http port for a connection Constant strings and logic for HTTP(S) default ports were starting to be spread throughout netops.c. Instead of duplicating this again to determine if a Host header should include the port, move the default port constants and logic into an internal method in netops.{c,h}.

52f859fd

2018-11-09T19:32:08

signature: fix out-of-bounds read when parsing timezone offset When parsing a signature's timezone offset, we first check whether there is a timezone at all by verifying that there are still bytes left to read following the time itself. The check thus looks like `time_end + 1 < buffer_end`, which is actually correct in this case. After setting the timezone's start pointer to that location, we compute the remaining bytes by using the formula `buffer_end - tz_start + 1`, re-using the previous `time_end + 1`. But this is in fact missing the braces around `(tz_start + 1)`, thus leading to an overestimation of the remaining bytes by a length of two. In case of a non-NUL terminated buffer, this will result in an overflow. The function `git_signature__parse` is only used in two locations. First is `git_signature_from_buffer`, which only accepts a string without a length. The string thus necessarily has to be NUL terminated and cannot trigger the issue. The other function is `git_commit__parse_raw`, which can in fact trigger the error as it may receive non-NUL terminated commit data. But as objects read from the ODB are always NUL-terminated by us as a cautionary measure, it cannot trigger the issue either. In other words, this error does not have any impact on security.

9ad96367

2018-11-07T15:31:21

smart transport: only clear url on hard reset After creating a transport for a server, we expect to be able to call `connect`, then invoke subsequent `action` calls. We provide the URL to these `action` calls, although our built-in transports happen to ignore it since they've already parsed it into an internal format that they intend to use (`gitno_connection_data`). In ca2eb4608243162a13c427e74526b6422d5a6659, we began clearing the URL field after a connection, meaning that subsequent calls to transport `action` callbacks would get a NULL URL, which went undetected since the builtin transports ignore the URL when they're already connected (instead of re-parsing it into an internal format). Downstream custom transport implementations (eg, LibGit2Sharp) did notice this change, however. Since `reset_stream` is called even when we're not closing the subtransport, update to only clear the URL when we're closing the subtransport. This ensures that `action` calls will get the correct URL information even after a connection.

f8b9493b

2018-11-05T15:46:08

apply: test re-adding a file after removing it Ensure that we can add a file back after it's been removed. Update the renamed/deleted validation in application to not apply to deltas that are adding files to support this.

78580ad3

2018-11-05T15:34:59

apply: test modifying a file after renaming it Ensure that we cannot modify a file after it's been renamed out of the way. If multiple deltas exist for a single path, ensure that we do not attempt to modify a file after it's been renamed out of the way. To support this, we must track the paths that have been removed or renamed; add to a string map when we remove a path and remove from the string map if we recreate a path. Validate that we are not applying to a path that is in this map, unless the delta is a rename, since git supports renaming one file to two different places in two different deltas. Further, test that we cannot apply a modification delta to a path that will be created in the future by a rename (a path that does not yet exist.)

df4258ad

2018-11-04T13:01:03

apply: handle multiple deltas to the same file git allows a patch file to contain multiple deltas to the same file: although it does not produce files in this format itself, this could be the result of concatenating two different patch files that affected the same file. git apply behaves by applying this next delta to the existing postimage of the file. We should do the same. If we have previously seen a file, and produced a postimage for it, we will load that postimage and apply the current delta to that. If we have not, get the file from the preimage.

6fecf4d1

2018-11-04T11:47:46

apply: handle exact renames Deltas containing exact renames are special; they simple indicate that a file was renamed without providing additional metadata (like the filemode). Teach the reader to provide the file mode and use the preimage's filemode in the case that the delta does not provide one.)

12f9ac17

2018-11-04T11:26:42

apply: validate unchanged mode when applying both When applying to both the index and the working directory, ensure that the working directory's mode matches the index's mode. It's not sufficient to look only at the hashed object id to determine that the file is unchanged, git also takes the mode into account.

52e27b84

2018-10-10T12:42:54

reader: free is unused and unnecessary None of the reader implementations actually allocate anything themselves, so they don't need a free function. Remove it.

47cc5f85

2018-09-29T19:32:51

apply: introduce a hunk callback Introduce a callback to patch application that allows consumers to cancel hunk application.

af33210b

2018-07-10T16:10:03

apply: introduce a delta callback Introduce a callback to the application options that allow callers to add a per-delta callback. The callback can return an error code to stop patch application, or can return a value to skip the application of a particular delta.

37b25ac5

2018-07-08T16:12:58

apply: move location to an argument, not the opts Move the location option to an argument, out of the options structure. This allows the options structure to be re-used for functions that don't need to know the location, since it's implicit in their functionality. For example, `git_apply_tree` should not take a location, but is expected to take all the other options.

9be89bbd

2018-07-01T11:08:26

reader: apply working directory filters When reading a file from the working directory, ensure that we apply any necessary filters to the item. This ensures that we get the repository-normalized data as the preimage, and further ensures that we can accurately compare the working directory contents to the index contents for accurate safety validation in the `BOTH` case.

813f0802

2018-07-01T15:14:36

apply: validate workdir contents match index for BOTH When applying to both the index and the working directory, ensure that the index contents match the working directory. This mirrors the requirement in `git apply --index`. This also means that - along with the prior commit that uses the working directory contents as the checkout baseline - we no longer expect conflicts during checkout. So remove the special-case error handling for checkout conflicts. (Any checkout conflict now would be because the file was actually modified between the start of patch application and the checkout.)

0f4b2f02

2018-07-01T15:13:50

reader: optionally validate index matches workdir When using a workdir reader, optionally validate that the index contents match the working directory contents.

2d27ddc0

2018-07-01T21:35:51

apply: use an indexwriter Place the entire `git_apply` operation inside an indexwriter, so that we lock the index before we begin performing patch application. This ensures that there are no other processes modifying things in the working directory.

5b8d5a22

2018-07-01T13:42:53

apply: use preimage as the checkout baseline Use the preimage as the checkout's baseline. This allows us to support applying patches to files that are modified in the working directory (those that differ from the HEAD and index). Without this, files will be reported as (checkout) conflicts. With this, we expect the on-disk data when we began the patch application (the "preimage") to be on-disk during checkout. We could have also simply used the `FORCE` flag to checkout to accomplish a similar mechanism. However, `FORCE` ignores all differences, while providing a preimage ensures that we will only overwrite the file contents that we actually read. Modify the reader interface to provide the OID to support this.

dddfff77

2018-06-30T17:12:16

apply: convert checkout conflicts to apply failures When there's a checkout conflict during apply, that means that the working directory was modified in a conflicting manner and the postimage cannot be written. During application, convert this to an application failure for consistency across workdir/index/both applications.

5b66b667

2018-06-29T12:39:41

apply: when preimage file is missing, return EAPPLYFAIL The preimage file being missing entirely is simply a case of an application failure; return the correct error value for the caller.

e0224121

2018-06-29T12:09:02

apply: simplify checkout vs index application Separate the concerns of applying via checkout and updating the repository's index. This results in simpler functionality and allows us to not build the temporary collection of paths in the index case.

20f8a6db

2018-06-28T17:26:21

apply: remove deleted paths from index We update the index with the new_file side of the delta, but we need to explicitly remove the old_file path in the case where an item was deleted or renamed.

c3077ea0

2018-06-25T21:24:49

apply: return a specific exit code on failure Return `GIT_EAPPLYFAIL` on patch application failure so that users can determine that patch application failed due to a malformed/conflicting patch by looking at the error code.

d54aa9ae

2018-06-26T15:25:30

iterator: introduce `git_iterator_foreach` Introduce a `git_iterator_foreach` helper function which invokes a callback on all files for a given iterator.

9c34c996

2018-06-25T17:03:14

apply: handle file additions Don't attempt to read the postimage file during a file addition, simply use an empty buffer as the postimage. Also, test that we can handle file additions.

3b5378c5

2018-06-25T16:27:06

apply: handle file deletions If the file was deleted in the postimage, do not attempt to update the target. Instead, ignore it and simply allow it to stay removed in our computed postimage. Also, test that we can handle file deletions.

f83bbe0a

2018-03-19T19:50:45

apply: introduce `git_apply` Introduce `git_apply`, which will take a `git_diff` and apply it to the working directory (akin to `git apply`), the index (akin to `git apply --cached`), or both (akin to `git apply --index`).

664cda6f

2018-03-19T20:10:38

apply: reimplement `git_apply_tree` with readers The generic `git_reader` interface simplifies `git_apply_tree` somewhat. Reimplement `git_apply_tree` with them.

d73043a2

2018-03-19T20:10:31

reader: a generic way to read files from repos Similar to the `git_iterator` interface, the `git_reader` interface will allow us to read file contents from an arbitrary repository-backed data source (trees, index, or working directory).

02b1083a

2018-01-28T23:25:07

apply: introduce `git_apply_tree` Introduce `git_apply_tree`, which will apply a `git_diff` to a given `git_tree`, allowing an in-memory patch application for a repository.

2b12dcf6

2018-03-19T19:45:11

iterator: optionally hash filesystem iterators Optionally hash the contents of files encountered in the filesystem or working directory iterators. This is not expected to be used in production code paths, but may allow us to simplify some test contexts. For working directory iterators, apply filters as appropriate, since we have the context able to do it.

37acffac

2018-10-08T20:51:20

remote: remove static create_internal function

10cba764

2018-07-06T21:58:34

remote: lower the default vector size to 8 As it is, this is space for 32 refs pointers, which feels a little much. Lower it to 8, as it is the minimum vector size anyway.

thodg/libgit2/src

src

Log