kmx git

Commit	Date	Message
2a99df69	2012-05-24T17:14:56	Fix bugs for status with spaces and reloaded attrs This fixes two bugs: * Issue #728 where git_status_file was not working for files that contain spaces. This was caused by reusing the "fnmatch" parsing code from ignore and attribute files to interpret the "pathspec" that constrained the files to apply the status to. In that code, unescaped whitespace was considered terminal to the pattern, so a file with internal whitespace was excluded from the matched files. The fix was to add a mode to that code that allows spaces and tabs inside patterns. This mode only comes into play when parsing in-memory strings. * The other issue was undetected, but it was in the recently added code to reload gitattributes / gitignores when they were changed on disk. That code was not clearing out the old values from the cached file content before reparsing which meant that newly added patterns would be read in, but deleted patterns would not be removed. The fix was to clear the vector of patterns in a cached file before reparsing the file.
904b67e6	2012-05-18T01:48:50	errors: Rename error codes
e172cf08	2012-05-18T01:21:06	errors: Rename the generic return codes
29e948de	2012-05-10T10:38:10	global: Change parameter ordering in API Consistency is good.
bd4ca902	2012-05-16T17:02:06	Fix status for files under ignored dirs There was a bug where tracked files inside directories that were inside ignored directories where not being found by status. To make that a little clearer, if you have a .gitignore with: ignore/ And then have the following files: ignore/dir/tracked <-- actually a tracked file ignore/dir/untracked <-- should be ignored Then we would show the tracked file as being removed (because when we got the to contained item "dir/" inside the ignored directory, we decided it was safe to skip -- bzzt, wrong!). This update is much more careful about checking that we are not skipping over any prefix of a tracked item, regardless of whether it is ignored or not. As documented in diff.c, this commit does create behavior that still differs from core git with regards to the handling of untracked files contained inside ignored directories. With libgit2, those files will just not show up in status or diff. With core git, those files don't show up in status or diff either unless they are explicitly ignored by a .gitignore pattern in which case they show up as ignored files. Needless to say, this is a local behavior difference only, so it should not be important and (to me) the libgit2 behavior seems more consistent.
41a82592	2012-05-15T14:17:39	Ranged iterators and rewritten git_status_file The goal of this work is to rewrite git_status_file to use the same underlying code as git_status_foreach. This is done in 3 phases: 1. Extend iterators to allow ranged iteration with start and end prefixes for the range of file names to be covered. 2. Improve diff so that when there is a pathspec and there is a common non-wildcard prefix of the pathspec, it will use ranged iterators to minimize excess iteration. 3. Rewrite git_status_file to call git_status_foreach_ext with a pathspec that covers just the one file being checked. Since ranged iterators underlie the status & diff implementation, this is actually fairly efficient. The workdir iterator does end up loading the contents of all the directories down to the single file, which should ideally be avoided, but it is pretty good.
7e000ab2	2012-05-08T15:03:59	Add support for diffing index with no HEAD When a repo is first created, there is no HEAD yet and attempting to diff files in the index was showing nothing because a tree iterator could not be constructed. This adds an "empty" iterator and falls back on that when the head cannot be looked up.
b709e951	2012-05-04T11:06:12	Fix memory leaks and use after free
3fbcac89	2012-05-02T19:56:38	Remove old and unused error codes
40879fac	2012-05-02T15:59:02	Merge branch 'new-error-handling' into development Conflicts: .travis.yml include/git2/diff.h src/config_file.c src/diff.c src/diff_output.c src/mwindow.c src/path.c tests-clar/clar_helpers.c tests-clar/object/tree/frompath.c tests/t00-core.c tests/t03-objwrite.c tests/t08-tag.c tests/t10-refs.c tests/t12-repo.c tests/t18-status.c tests/test_helpers.c tests/test_main.c
16b83019	2012-03-04T23:28:36	Fix usage of "new" for fieldname in public header This should restore the ability to include libgit2 headers in C++ projects. Cherry picked 2de60205dfea2c4a422b2108a5e8605f97c2e895 from development into new-error-handling.
821f6bc7	2012-04-26T13:04:54	Fix Win32 warnings
eb3d71a5	2012-04-25T22:23:35	diff: fix generation of the header of a removal patch
19fa2bc1	2012-04-17T15:12:50	Convert attrs and diffs to use string pools This converts the git attr related code (including ignores) and the git diff related code (and implicitly the status code) to use `git_pools` for storing strings. This reduces the number of small blocks allocated dramatically.
14a513e0	2012-04-13T15:00:29	Add support for pathspec to diff and status This adds preliminary support for pathspecs to diff and status. The implementation is not very optimized (it still looks at every single file and evaluated the the pathspec match against them), but it works.
7784bcbb	2012-04-11T11:52:59	Refactor git_repository_open with new options Add a new command `git_repository_open_ext` with extended options that control how searching for a repository will be done. The existing `git_repository_open` and `git_repository_discover` are reimplemented on top of it. We may want to change the default behavior of `git_repository_open` but this commit does not do that. Improve support for "gitdir" files where the work dir is separate from the repo and support for the "separate-git-dir" config. Also, add support for opening repos created with `git-new-workdir` script (although I have only confirmed that they can be opened, not that all functions work correctly). There are also a few minor changes that came up: - Fix `git_path_prettify` to allow in-place prettifying. - Fix `git_path_root` to support backslashes on Win32. This fix should help many repo open/discover scenarios - it is the one function called when opening before prettifying the path. - Tweak `git_config_get_string` to set the "out" pointer to NULL if the config value is not found. Allows some other cleanup. - Fix a couple places that should have been calling `git_repository_config__weakptr` and were not. - Fix `cl_git_sandbox_init` clar helper to support bare repos.
95dfb031	2012-03-30T14:40:50	Improve config handling for diff,submodules,attrs This adds support for a bunch of core.* settings that affect diff and status, plus fixes up some incorrect implementations of those settings from before. Also, this cleans up the handling of config settings in the new submodules code and in the old attrs/ignore code.
1db12b00	2012-03-25T23:04:26	Eliminate hairy COITERATE macro I decided that the COITERATE macro was, in the end causing more confusion that it would save and decided just to write out the loops that I needed for parallel diff list iteration. It is not that much code and this just feels less obfuscated.
4b136a94	2012-03-23T09:26:09	Fix crash in new status and add recurse option This fixes the bug that @nulltoken found (thank you!) where if there were untracked directories alphabetically after the last tracked item, the diff implementation would deref a NULL pointer. The fix involved the code which decides if it is necessary to recurse into a directory in the working dir, so it was easy to add a new option `GIT_STATUS_OPT_RECURSE_UNTRACKED_DIRS` to control if the contents of untracked directories should be included in status.
66142ae0	2012-03-22T10:44:36	New status fixes This adds support for roughly-right tracking of submodules (although it does not recurse into submodules to detect internal modifications a la core git), and it adds support for including unmodified files in diff iteration if requested.
a48ea31d	2012-03-21T12:33:09	Reimplment git_status_foreach using git diff This is an initial reimplementation of status using diff a la the way that core git does it.
0d0fa7c3	2012-03-16T15:56:01	Convert attr, ignore, mwindow, status to new errors Also cleaned up some previously converted code that still had little things to polish.
ae9e29fd	2012-03-06T16:14:31	Migrating diff to new error handling Ended up migrating a bunch of upstream functions as well including vector, attr_file, and odb in order to get this to work right.
2de60205	2012-03-04T23:28:36	Fix usage of "new" for fieldname in public header This should restore the ability to include libgit2 headers in C++ projects.
e1bcc191	2012-03-01T11:45:00	Revert GIT_STATUS constants to avoid issues This reverts the changes to the GIT_STATUS constants and adds a new enumeration to describe the type of change in a git_diff_delta. I don't love this solution, but it should prevent strange errors from occurring for now. Eventually, I would like to unify the various status constants, but it needs a larger plan and I just wanted to eliminate this breakage quickly.
854eccbb	2012-02-29T12:04:59	Clean up GIT_UNUSED macros on all platforms It turns out that commit 31e9cfc4cbcaf1b38cdd3dbe3282a8f57e5366a5 did not fix the GIT_USUSED behavior on all platforms. This commit walks through and really cleans things up more thoroughly, getting rid of the unnecessary stuff. To remove the use of some GIT_UNUSED, I ended up adding a couple of new iterators for hashtables that allow you to iterator just over keys or just over values. In making this change, I found a bug in the clar tests (where we were doing count++ but meant to do (count)++ to increment the value). I fixed that but then found the test failing because it was not really using an empty repo. So, I took some of the code that I wrote for iterator testing and moved it to clar_helpers.c, then made use of that to make it easier to open fixtures on a per test basis even within a single test file.
74fa4bfa	2012-02-28T16:14:47	Update diff to use iterators This is a major reorganization of the diff code. This changes the diff functions to use the iterators for traversing the content. This allowed a lot of code to be simplified. Also, this moved the functions relating to outputting a diff into a new file (diff_output.c). This includes a number of other changes - adding utility functions, extending iterators, etc. plus more tests for the diff code. This also takes the example diff.c program much further in terms of emulating git-diff command line options.
e47329b6	2012-02-13T17:29:30	First pass of diff index to workdir implementation This is an initial version of git_diff_workdir_to_index. It also includes renaming some structures and some refactoring of the existing code so that it could be shared better with the new function. This is not complete since it needs a rebase to get some new odb functions from the upstream branch.
caf71ec0	2012-02-07T15:30:18	Add tests and fix bugs for diff whitespace options Once I added tests for the whitespace handling options of diff, I realized that there were some bugs. This fixes those and adds the new tests into the test suite.
a2e895be	2012-02-07T12:14:28	Continue implementation of git-diff * Implemented git_diff_index_to_tree * Reworked git_diff_options structure to handle more options * Made most of the options in git_diff_options actually work * Reorganized code a bit to remove some redundancy * Added option parsing to examples/diff.c to test most options
5a2f097f	2012-02-03T17:05:05	Fix minor WIN32 incompatibility File mode flags are not all defined on WIN32, but since git is so rigid in how it uses file modes, there is no reason not to hard code a particular value. Also, this is only used in the git_diff_print_compact helper function, so it is really really not important.
3a437590	2012-02-03T16:53:01	Clean up diff implementation for review This fixes several bugs, updates tests and docs, eliminates the FILE* assumption in favor of printing callbacks for the diff patch formatter helpers, and adds a "diff" example function that can perform a diff from the command line.
65b09b1d	2012-02-02T18:03:43	Implement diff lists and formatters This reworks the diff API to separate the steps of producing a diff descriptions from formatting the diff. This will allow us to share diff output code with the various diff creation scenarios and will allow us to implement rename detection as an optional pass that can be run on a diff list.
cd33323b	2012-01-27T11:29:25	Initial implementation of git_diff_blob This gets the basic plumbing in place for git_diff_blob. There is a known issue where additional parameters like the number of lines of context to display on the diff are not working correctly (which leads one of the new unit tests to fail).

2a99df69

2012-05-24T17:14:56

Fix bugs for status with spaces and reloaded attrs This fixes two bugs: * Issue #728 where git_status_file was not working for files that contain spaces. This was caused by reusing the "fnmatch" parsing code from ignore and attribute files to interpret the "pathspec" that constrained the files to apply the status to. In that code, unescaped whitespace was considered terminal to the pattern, so a file with internal whitespace was excluded from the matched files. The fix was to add a mode to that code that allows spaces and tabs inside patterns. This mode only comes into play when parsing in-memory strings. * The other issue was undetected, but it was in the recently added code to reload gitattributes / gitignores when they were changed on disk. That code was not clearing out the old values from the cached file content before reparsing which meant that newly added patterns would be read in, but deleted patterns would not be removed. The fix was to clear the vector of patterns in a cached file before reparsing the file.

904b67e6

2012-05-18T01:48:50

errors: Rename error codes

e172cf08

2012-05-18T01:21:06

errors: Rename the generic return codes

29e948de

2012-05-10T10:38:10

global: Change parameter ordering in API Consistency is good.

bd4ca902

2012-05-16T17:02:06

Fix status for files under ignored dirs There was a bug where tracked files inside directories that were inside ignored directories where not being found by status. To make that a little clearer, if you have a .gitignore with: ignore/ And then have the following files: ignore/dir/tracked <-- actually a tracked file ignore/dir/untracked <-- should be ignored Then we would show the tracked file as being removed (because when we got the to contained item "dir/" inside the ignored directory, we decided it was safe to skip -- bzzt, wrong!). This update is much more careful about checking that we are not skipping over any prefix of a tracked item, regardless of whether it is ignored or not. As documented in diff.c, this commit does create behavior that still differs from core git with regards to the handling of untracked files contained inside ignored directories. With libgit2, those files will just not show up in status or diff. With core git, those files don't show up in status or diff either *unless* they are explicitly ignored by a .gitignore pattern in which case they show up as ignored files. Needless to say, this is a local behavior difference only, so it should not be important and (to me) the libgit2 behavior seems more consistent.

41a82592

2012-05-15T14:17:39

Ranged iterators and rewritten git_status_file The goal of this work is to rewrite git_status_file to use the same underlying code as git_status_foreach. This is done in 3 phases: 1. Extend iterators to allow ranged iteration with start and end prefixes for the range of file names to be covered. 2. Improve diff so that when there is a pathspec and there is a common non-wildcard prefix of the pathspec, it will use ranged iterators to minimize excess iteration. 3. Rewrite git_status_file to call git_status_foreach_ext with a pathspec that covers just the one file being checked. Since ranged iterators underlie the status & diff implementation, this is actually fairly efficient. The workdir iterator does end up loading the contents of all the directories down to the single file, which should ideally be avoided, but it is pretty good.

7e000ab2

2012-05-08T15:03:59

Add support for diffing index with no HEAD When a repo is first created, there is no HEAD yet and attempting to diff files in the index was showing nothing because a tree iterator could not be constructed. This adds an "empty" iterator and falls back on that when the head cannot be looked up.

b709e951

2012-05-04T11:06:12

Fix memory leaks and use after free

3fbcac89

2012-05-02T19:56:38

Remove old and unused error codes

40879fac

2012-05-02T15:59:02

Merge branch 'new-error-handling' into development Conflicts: .travis.yml include/git2/diff.h src/config_file.c src/diff.c src/diff_output.c src/mwindow.c src/path.c tests-clar/clar_helpers.c tests-clar/object/tree/frompath.c tests/t00-core.c tests/t03-objwrite.c tests/t08-tag.c tests/t10-refs.c tests/t12-repo.c tests/t18-status.c tests/test_helpers.c tests/test_main.c

16b83019

2012-03-04T23:28:36

Fix usage of "new" for fieldname in public header This should restore the ability to include libgit2 headers in C++ projects. Cherry picked 2de60205dfea2c4a422b2108a5e8605f97c2e895 from development into new-error-handling.

821f6bc7

2012-04-26T13:04:54

Fix Win32 warnings

eb3d71a5

2012-04-25T22:23:35

diff: fix generation of the header of a removal patch

19fa2bc1

2012-04-17T15:12:50

Convert attrs and diffs to use string pools This converts the git attr related code (including ignores) and the git diff related code (and implicitly the status code) to use `git_pools` for storing strings. This reduces the number of small blocks allocated dramatically.

14a513e0

2012-04-13T15:00:29

Add support for pathspec to diff and status This adds preliminary support for pathspecs to diff and status. The implementation is not very optimized (it still looks at every single file and evaluated the the pathspec match against them), but it works.

7784bcbb

2012-04-11T11:52:59

Refactor git_repository_open with new options Add a new command `git_repository_open_ext` with extended options that control how searching for a repository will be done. The existing `git_repository_open` and `git_repository_discover` are reimplemented on top of it. We may want to change the default behavior of `git_repository_open` but this commit does not do that. Improve support for "gitdir" files where the work dir is separate from the repo and support for the "separate-git-dir" config. Also, add support for opening repos created with `git-new-workdir` script (although I have only confirmed that they can be opened, not that all functions work correctly). There are also a few minor changes that came up: - Fix `git_path_prettify` to allow in-place prettifying. - Fix `git_path_root` to support backslashes on Win32. This fix should help many repo open/discover scenarios - it is the one function called when opening before prettifying the path. - Tweak `git_config_get_string` to set the "out" pointer to NULL if the config value is not found. Allows some other cleanup. - Fix a couple places that should have been calling `git_repository_config__weakptr` and were not. - Fix `cl_git_sandbox_init` clar helper to support bare repos.

95dfb031

2012-03-30T14:40:50

Improve config handling for diff,submodules,attrs This adds support for a bunch of core.* settings that affect diff and status, plus fixes up some incorrect implementations of those settings from before. Also, this cleans up the handling of config settings in the new submodules code and in the old attrs/ignore code.

1db12b00

2012-03-25T23:04:26

Eliminate hairy COITERATE macro I decided that the COITERATE macro was, in the end causing more confusion that it would save and decided just to write out the loops that I needed for parallel diff list iteration. It is not that much code and this just feels less obfuscated.

4b136a94

2012-03-23T09:26:09

Fix crash in new status and add recurse option This fixes the bug that @nulltoken found (thank you!) where if there were untracked directories alphabetically after the last tracked item, the diff implementation would deref a NULL pointer. The fix involved the code which decides if it is necessary to recurse into a directory in the working dir, so it was easy to add a new option `GIT_STATUS_OPT_RECURSE_UNTRACKED_DIRS` to control if the contents of untracked directories should be included in status.

66142ae0

2012-03-22T10:44:36

New status fixes This adds support for roughly-right tracking of submodules (although it does not recurse into submodules to detect internal modifications a la core git), and it adds support for including unmodified files in diff iteration if requested.

a48ea31d

2012-03-21T12:33:09

Reimplment git_status_foreach using git diff This is an initial reimplementation of status using diff a la the way that core git does it.

0d0fa7c3

2012-03-16T15:56:01

Convert attr, ignore, mwindow, status to new errors Also cleaned up some previously converted code that still had little things to polish.

ae9e29fd

2012-03-06T16:14:31

Migrating diff to new error handling Ended up migrating a bunch of upstream functions as well including vector, attr_file, and odb in order to get this to work right.

2de60205

2012-03-04T23:28:36

Fix usage of "new" for fieldname in public header This should restore the ability to include libgit2 headers in C++ projects.

e1bcc191

2012-03-01T11:45:00

Revert GIT_STATUS constants to avoid issues This reverts the changes to the GIT_STATUS constants and adds a new enumeration to describe the type of change in a git_diff_delta. I don't love this solution, but it should prevent strange errors from occurring for now. Eventually, I would like to unify the various status constants, but it needs a larger plan and I just wanted to eliminate this breakage quickly.

854eccbb

2012-02-29T12:04:59

Clean up GIT_UNUSED macros on all platforms It turns out that commit 31e9cfc4cbcaf1b38cdd3dbe3282a8f57e5366a5 did not fix the GIT_USUSED behavior on all platforms. This commit walks through and really cleans things up more thoroughly, getting rid of the unnecessary stuff. To remove the use of some GIT_UNUSED, I ended up adding a couple of new iterators for hashtables that allow you to iterator just over keys or just over values. In making this change, I found a bug in the clar tests (where we were doing *count++ but meant to do (*count)++ to increment the value). I fixed that but then found the test failing because it was not really using an empty repo. So, I took some of the code that I wrote for iterator testing and moved it to clar_helpers.c, then made use of that to make it easier to open fixtures on a per test basis even within a single test file.

74fa4bfa

2012-02-28T16:14:47

Update diff to use iterators This is a major reorganization of the diff code. This changes the diff functions to use the iterators for traversing the content. This allowed a lot of code to be simplified. Also, this moved the functions relating to outputting a diff into a new file (diff_output.c). This includes a number of other changes - adding utility functions, extending iterators, etc. plus more tests for the diff code. This also takes the example diff.c program much further in terms of emulating git-diff command line options.

e47329b6

2012-02-13T17:29:30

First pass of diff index to workdir implementation This is an initial version of git_diff_workdir_to_index. It also includes renaming some structures and some refactoring of the existing code so that it could be shared better with the new function. This is not complete since it needs a rebase to get some new odb functions from the upstream branch.

caf71ec0

2012-02-07T15:30:18

Add tests and fix bugs for diff whitespace options Once I added tests for the whitespace handling options of diff, I realized that there were some bugs. This fixes those and adds the new tests into the test suite.

a2e895be

2012-02-07T12:14:28

Continue implementation of git-diff * Implemented git_diff_index_to_tree * Reworked git_diff_options structure to handle more options * Made most of the options in git_diff_options actually work * Reorganized code a bit to remove some redundancy * Added option parsing to examples/diff.c to test most options

5a2f097f

2012-02-03T17:05:05

Fix minor WIN32 incompatibility File mode flags are not all defined on WIN32, but since git is so rigid in how it uses file modes, there is no reason not to hard code a particular value. Also, this is only used in the git_diff_print_compact helper function, so it is really really not important.

3a437590

2012-02-03T16:53:01

Clean up diff implementation for review This fixes several bugs, updates tests and docs, eliminates the FILE* assumption in favor of printing callbacks for the diff patch formatter helpers, and adds a "diff" example function that can perform a diff from the command line.

65b09b1d

2012-02-02T18:03:43

Implement diff lists and formatters This reworks the diff API to separate the steps of producing a diff descriptions from formatting the diff. This will allow us to share diff output code with the various diff creation scenarios and will allow us to implement rename detection as an optional pass that can be run on a diff list.

cd33323b

2012-01-27T11:29:25

Initial implementation of git_diff_blob This gets the basic plumbing in place for git_diff_blob. There is a known issue where additional parameters like the number of lines of context to display on the diff are not working correctly (which leads one of the new unit tests to fail).

thodg/libgit2/src/diff.c

src/diff.c

Log