|
a7b4b639
|
2019-08-24T12:14:31
|
|
ignore: correct handling of nested rules overriding wild card unignore
problem:
filesystem_iterator loads .gitignore files in top-down order.
subsequently, ignore module evaluates them in the order they are loaded.
this creates a problem if we have unignored a rule (using a wild card)
in a sub dir and ignored it again in a level further below (see the test
included in this patch).
solution:
process ignores in reverse order.
closes #4963
|
|
e07dbc92
|
2019-07-20T11:26:00
|
|
Merge pull request #5173 from pks-t/pks/gitignore-wildmatch-error
ignore: fix determining whether a shorter pattern negates another
|
|
658022c4
|
2019-07-18T13:53:41
|
|
configuration: cvar -> configmap
`cvar` is an unhelpful name. Refactor its usage to `configmap` for more
clarity.
|
|
|
6f6340af
|
2019-07-18T11:57:55
|
|
ignore: fix determining whether a shorter pattern negates another
When computing whether we need to store a negative pattern, we iterate
through all previously known patterns and check whether the negative
pattern undoes any of the previous ones. In doing so we call `wildmatch`
and check it's return for any negative error values. If there was a
negative return, we will abort and bubble up that error to the caller.
In fact, this check for negative values stems from the time where we
still used `fnmatch` instead of `wildmatch`. For `fnmatch`, negative
values indicate a "real" error, while for `wildmatch` a negative value
may be returned if the matching was prematurely aborted. A premature
abort may for example also happen if the pattern matches a prefix of the
haystack if the pattern is shorter. Returning an error in that case is
the wrong thing to do.
Fix the code to compare for equality with `WM_MATCH`, only. Negative
values returned by `wildmatch` are perfectly fine and thus should be
ignored. Add a test that verifies we do not see the error.
|
|
|
f8346905
|
2019-07-12T09:03:33
|
|
attr_file: ignore macros defined in subdirectories
Right now, we are unconditionally applying all macros found in a
gitatttributes file. But quoting gitattributes(5):
Custom macro attributes can be defined only in top-level
gitattributes files ($GIT_DIR/info/attributes, the .gitattributes
file at the top level of the working tree, or the global or
system-wide gitattributes files), not in .gitattributes files in
working tree subdirectories. The built-in macro attribute "binary"
is equivalent to:
So gitattribute files in subdirectories of the working tree may
explicitly _not_ contain macro definitions, but we do not currently
enforce this limitation.
This patch introduces a new parameter to the gitattributes parser that
tells whether macros are allowed in the current file or not. If set to
`false`, we will still parse macros, but silently ignore them instead of
adding them to the list of defined macros. Update all callers to
correctly determine whether the to-be-parsed file may contain macros or
not. Most importantly, when walking up the directory hierarchy, we will
only set it to `true` once it reaches the root directory of the repo
itself.
Add a test that verifies that we are indeed not applying macros from
subdirectories. Previous to these changes, the test would've failed.
|
|
b883d370
|
2019-06-26T14:49:30
|
|
ignore: fix a missing commondir causing failures
As with the preceding commit, the ignore code tries to load code from
info/exclude, and we fail to ignore a non-existent file here.
|
|
|
05f9986a
|
2019-06-14T08:06:05
|
|
attr_file: convert to use `wildmatch`
Upstream git has converted to use `wildmatch` instead of
`fnmatch`. Convert our gitattributes logic to use `wildmatch` as
the last user of `fnmatch`. Please, don't expect I know what I'm
doing here: the fnmatch parser is one of the most fun things to
play around with as it has a sh*tload of weird cases. In all
honesty, I'm simply relying on our tests that are by now rather
comprehensive in that area.
The conversion actually fixes compatibility with how git.git
parser "**" patterns when the given path does not contain any
directory separators. Previously, a pattern "**.foo" erroneously
wouldn't match a file "x.foo", while git.git would match.
Remove the new-unused LEADINGDIR/NOLEADINGDIR flags for
`git_attr_fnmatch`.
|
|
|
de70bb46
|
2019-06-13T15:27:22
|
|
global: convert trivial `fnmatch` users to use `wildcard`
Upstream git.git has converted its codebase to use wildcard in
favor of fnmatch in commit 70a8fc999d (stop using fnmatch (either
native or compat), 2014-02-15). To keep our own regex-matching in
line with what git does, convert all trivial instances of
`fnmatch` usage to use `wildcard`, instead. Trivial usage is
defined to be use of `fnmatch` with either no flags or flags that
have a 1:1 equivalent in wildmatch (PATHNAME, IGNORECASE).
|
|
|
9d117e20
|
2019-04-05T10:22:46
|
|
ignore: treat paths with trailing "/" as directories
The function `git_ignore_path_is_ignored` is there to test the
ignore status of paths that need not necessarily exist inside of
a repository. This has the implication that for a given path, we
cannot always decide whether it references a directory or a file,
and we need to distinguish those cases because ignore rules may
treat those differently. E.g. given the following gitignore file:
*
!/**/
we'd only want to unignore directories, while keeping files
ignored. But still, calling `git_ignore_path_is_ignored("dir/")`
will say that this directory is ignored because it treats "dir/"
as a file path.
As said, the `is_ignored` function cannot always decide whether
the given path is a file or directory, and thus it may produce
wrong results in some cases. While this is unfixable in the
general case, we can do better when we are being passed a path
name with a trailing path separator (e.g. "dir/") and always
treat them as directories.
|
|
|
f673e232
|
2018-12-27T13:47:34
|
|
git_error: use new names in internal APIs and usage
Move to the `git_error` name in the internal API for error-related
functions.
|
|
|
3be73011
|
2018-06-11T18:26:22
|
|
Merge pull request #4436 from pks-t/pks/packfile-stream-free
pack: rename `git_packfile_stream_free`
|
|
|
ecf4f33a
|
2018-02-08T11:14:48
|
|
Convert usage of `git_buf_free` to new `git_buf_dispose`
|
|
|
d22fd81c
|
2018-06-05T16:46:07
|
|
ignore: remove now-useless check for LEADINGDIR
When checking whether a rule negates another rule, we were checking
whether a rule had the `GIT_ATTR_FNMATCH_LEADINGDIR` flag set and, if
so, added a "/*" to its end before passing it to `fnmatch`. Our code now
sets `GIT_ATTR_FNMATCH_NOLEADINGDIR`, thus the `LEADINGDIR` flag shall
never be set. Furthermore, due to the `NOLEADINGDIR` flag, trailing
globs do not get consumed by our ignore parser anymore.
Clean up code by just dropping this now useless logic.
|
|
|
20b4c175
|
2018-06-05T16:12:58
|
|
ignore: fix negative leading directory rules unignoring subdirectory files
When computing whether a file is ignored, we simply search for the first
matching rule and return whether it is a positive ignore rule (the file
is really ignored) or whether it is a negative ignore rule (the file is
being unignored). Each rule has a set of flags which are being passed to
`fnmatch`, depending on what kind of rule it is. E.g. in case it is a
negative ignore we add a flag `GIT_ATTR_FNMATCH_NEGATIVE`, in case it
contains a glob we set the `GIT_ATTR_FNMATCH_HASGLOB` flag.
One of these flags is the `GIT_ATTR_FNMATCH_LEADINGDIR` flag, which is
always set in case the pattern has a trailing "/*" or in case the
pattern is negative. The flag causes the `fnmatch` function to return a
match in case a string is a leading directory of another, e.g. "dir/"
matches "dir/foo/bar.c". In case of negative patterns, this is wrong in
certain cases.
Take the following simple example of a gitignore:
dir/
!dir/
The `LEADINGDIR` flag causes "!dir/" to match "dir/foo/bar.c", and we
correctly unignore the directory. But take this example:
*.test
!dir/*
We expect everything in "dir/" to be unignored, but e.g. a file in a
subdirectory of dir should be ignored, as the "*" does not cross
directory hierarchies. With `LEADINGDIR`, though, we would just see that
"dir/" matches and return that the file is unignored, even if it is
contained in a subdirectory. Instead, we want to ignore leading
directories here and check "*.test". Afterwards, we have to iterate up
to the parent directory and do the same checks.
To fix the issue, disallow matching against leading directories in
gitignore files. This can be trivially done by just adding the
`GIT_ATTR_FNMATCH_NOLEADINGDIR` to the spec passed to
`git_attr_fnmatch__parse`. Due to a bug in that function, though, this
flag is being ignored for negative patterns, which is fixed in this
commit, as well. As a last fix, we need to ignore rules that are
supposed to match a directory when our path itself is a file.
All together, these changes fix the described error case.
|
|
|
251d8771
|
2018-04-06T12:24:10
|
|
attr_file: fix handling of directory patterns with trailing spaces
When comparing whether a path matches a directory rule, we pass the
both the path and directory name to `fnmatch` with
`GIT_ATTR_FNMATCH_DIRECTORY` being set. `fnmatch` expects the pattern to
contain no trailing directory '/', which is why we try to always strip
patterns of trailing slashes. We do not handle that case correctly
though when the pattern itself has trailing spaces, causing the match to
fail.
Fix the issue by stripping trailing spaces and tabs for a rule previous
to checking whether the pattern is a directory pattern with a trailing
'/'. This replaces the whitespace-stripping in our ignore file parsing
code, which was stripping whitespaces too late. Add a test to catch
future breakage.
|
|
|
a33deeb4
|
2018-02-28T12:20:23
|
|
win32: strncmp -> git__strncmp
The win32 C library is compiled cdecl, however when configured with
`STDCALL=ON`, our functions (and function pointers) will use the stdcall
calling convention. You cannot set a `__stdcall` function pointer to a
`__cdecl` function, so it's easier to just use our `git__strncmp`
instead of sorting that mess out.
|
|
|
e28e17e6
|
2018-02-01T10:36:33
|
|
attr: avoid stat'ting files for bare repositories
Depending on whether the path we want to look up an attribute for is a
file or a directory, the fnmatch function will be called with different
flags. Because of this, we have to first stat(3) the path to determine
whether it is a file or directory in `git_attr_path__init`. This is
wasteful though in bare repositories, where we can already be assured
that the path will never exist at all due to there being no worktree. In
this case, we will execute an unnecessary syscall, which might be
noticeable on networked file systems.
What happens right now is that we always pass the `GIT_DIR_FLAG_UNKOWN`
flag to `git_attr_path__init`, which causes it to `stat` the file itself
to determine its type. As it is calling `git_path_isdir` on the path,
which will always return `false` in case the path does not exist, we end
up with the path always being treated as a file in case of a bare
repository. As such, we can just check the bare-repository case in all
callers and then pass in `GIT_DIR_FLAG_FALSE` ourselves, avoiding the
need to `stat`. While this may not always be correct, it at least is no
different from our current behavior.
|
|
5cb6a2c9
|
2017-10-29T12:28:43
|
|
Ignore trailing whitespace in .gitignore files (as git itself does)
|
|
|
2d9ff8f5
|
2017-07-10T09:36:19
|
|
ignore: honor case insensitivity for negative ignores
When computing negative ignores, we throw away any rule which does not
undo a previous rule to optimize. But on case insensitive file systems,
we need to keep in mind that a negative ignore can also undo a previous
rule with different case, which we did not yet honor while determining
whether a rule undoes a previous one. So in the following example, we
fail to unignore the "/Case" directory:
/case
!/Case
Make both paths checking whether a plain- or wildcard-based rule undo a
previous rule aware of case-insensitivity. This fixes the described
issue.
|
|
|
b8922fc8
|
2017-07-07T13:27:27
|
|
ignore: keep negative rules containing wildcards
Ignore rules allow for reverting a previously ignored rule by prefixing
it with an exclamation mark. As such, a negative rule can only override
previously ignored files. While computing all ignore patterns, we try to
use this fact to optimize away some negative rules which do not override
any previous patterns, as they won't change the outcome anyway.
In some cases, though, this optimization causes us to get the actual
ignores wrong for some files. This may happen whenever the pattern
contains a wildcard, as we are unable to reason about whether a pattern
overrides a previous pattern in a sane way. This happens for example in
the case where a gitignore file contains "*.c" and "!src/*.c", where we
wouldn't un-ignore files inside of the "src/" subdirectory.
In this case, the first solution coming to mind may be to just strip the
"src/" prefix and simply compare the basenames. While that would work
here, it would stop working as soon as the basename pattern itself is
different, like for example with "*x.c" and "!src/*.c. As such, we
settle for the easier fix of just not optimizing away rules that contain
a wildcard.
|
|
|
4467543e
|
2017-07-07T12:27:43
|
|
ignore: return early to avoid useless indentation
|
|
|
9bd83622
|
2017-07-07T12:27:18
|
|
ignore: fix indentation of comment block
|
|
|
0c7f49dd
|
2017-06-30T13:39:01
|
|
Make sure to always include "common.h" first
Next to including several files, our "common.h" header also declares
various macros which are then used throughout the project. As such, we
have to make sure to always include this file first in all
implementation files. Otherwise, we might encounter problems or even
silent behavioural differences due to macros or defines not being
defined as they should be. So in fact, our header and implementation
files should make sure to always include "common.h" first.
This commit does so by establishing a common include pattern. Header
files inside of "src" will now always include "common.h" as its first
other file, separated by a newline from all the other includes to make
it stand out as special. There are two cases for the implementation
files. If they do have a matching header file, they will always include
this one first, leading to "common.h" being transitively included as
first file. If they do not have a matching header file, they instead
include "common.h" as first file themselves.
This fixes the outlined problems and will become our standard practice
for header and source files inside of the "src/" from now on.
|
|
|
2480d0eb
|
2017-06-30T13:34:05
|
|
Add missing license headers
Some implementation files were missing the license headers. This commit
adds them.
|
|
|
c5f3da96
|
2016-11-11T14:36:43
|
|
repository: use `git_repository_item_path`
The recent introduction of the commondir variable of a repository
requires callers to distinguish whether their files are part of
the dot-git directory or the common directory shared between
multpile worktrees. In order to take the burden from callers and
unify knowledge on which files reside where, the
`git_repository_item_path` function has been introduced which
encapsulate this knowledge.
Modify most existing callers of `git_repository_path` to use
`git_repository_item_path` instead, thus making them implicitly
aware of the common directory.
|
|
|
8a349bf2
|
2016-12-26T14:47:55
|
|
ignore: there must be a repository
Otherwise we'll NULL-dereference in git_attr_cache__init
|
|
909d5494
|
2016-12-29T12:25:15
|
|
giterr_set: consistent error messages
Error messages should be sentence fragments, and therefore:
1. Should not begin with a capital letter,
2. Should not conclude with punctuation, and
3. Should not end a sentence and begin a new one
|
|
|
fcb2c1c8
|
2016-08-12T09:06:15
|
|
ignore: allow unignoring basenames in subdirectories
The .gitignore file allows for patterns which unignore previous
ignore patterns. When unignoring a previous pattern, there are
basically three cases how this is matched when no globbing is
used:
1. when a previous file has been ignored, it can be unignored by
using its exact name, e.g.
foo/bar
!foo/bar
2. when a file in a subdirectory has been ignored, it can be
unignored by using its basename, e.g.
foo/bar
!bar
3. when all files with a basename are ignored, a specific file
can be unignored again by specifying its path in a
subdirectory, e.g.
bar
!foo/bar
The first problem in libgit2 is that we did not correctly treat
the second case. While we verified that the negative pattern
matches the tail of the positive one, we did not verify if it
only matches the basename of the positive pattern. So e.g. we
would have also negated a pattern like
foo/fruz_bar
!bar
Furthermore, we did not check for the third case, where a
basename is being unignored in a certain subdirectory again.
Both issues are fixed with this commit.
|
|
d364dc8b
|
2016-04-01T14:33:42
|
|
ignore: don't use realpath to canonicalize path
If we're looking for a symlink, realpath will give us the resolved path,
which is not what we're after, but a canonicalized version of the path
the user asked for.
|
|
|
657afd35
|
2015-09-13T06:18:49
|
|
ignore: add test and adjust style and comment for dir with wildmatch
The previous commit left the comment referencing the earlier state of
the code, change it to explain the current logic. While here, change the
logic to avoid repeating the copy of the base pattern.
|
|
6d0defe3
|
2015-08-24T18:47:48
|
|
Fix 'If we're dealing with a directory' check
|
|
|
2c57114f
|
2015-05-20T21:18:25
|
|
ignore: clear the error when matching a pattern negation
When we discover that we want to keep a negative rule, make sure to
clear the error variable, as it we otherwise return whatever was left by
the previous loop iteration.
|
|
4c09e19a
|
2015-03-30T14:07:44
|
|
Improvements to ignore performance on Windows.
Minimizing the number directory and file opens, minimizes the amount of IO thus reducing the overall cost of performing ignore operations.
|
|
|
4f358603
|
2015-03-24T16:33:50
|
|
ignore: fix negative ignores without wildcards.
|
|
9f779aac
|
2015-01-29T14:40:55
|
|
attrcache: don't re-read attrs during checkout
During checkout, assume that the .gitattributes files aren't
modified during the checkout. Instead, create an "attribute session"
during checkout. Assume that attribute data read in the same
checkout "session" hasn't been modified since the checkout started.
(But allow subsequent checkouts to invalidate the cache.)
Further, cache nonexistent git_attr_file data even when .gitattributes
files are not found to prevent re-scanning for nonexistent files.
|
|
|
e05b2ff1
|
2014-12-05T18:25:38
|
|
ignore: match git's rule negation rules
A rule can only negate something which was explicitly mentioned in the
rules before it. Change our parsing to ignore a negative rule which does
not negate something mentioned in the rules above it.
While here, fix a wrong allocator usage. The memory for the match string
comes from pool allocator. We must not free it with the general
allocator. We can instead simply forget the string and it will be
cleaned up.
|
|
bbb988a5
|
2014-09-17T14:52:31
|
|
path: Fix `git_path_walk_up` to work with non-rooted paths
|
|
f554611a
|
2014-05-06T12:41:26
|
|
Improve checks for ignore containment
The diff code was using an "ignored_prefix" directory to track if
a parent directory was ignored that contained untracked files
alongside tracked files. Unfortunately, when negative ignore rules
were used for directories inside ignored parents, the wrong rules
were applied to untracked files inside the negatively ignored
child directories.
This commit moves the logic for ignore containment into the workdir
iterator (which is a better place for it), so the ignored-ness of
a directory is contained in the frame stack during traversal. This
allows a child directory to override with a negative ignore and yet
still restore the ignored state of the parent when we traverse out
of the child.
Along with this, there are some problems with "directory only"
ignore rules on container directories. Given "a/*" and "!a/b/c/"
(where the second rule is a directory rule but the first rule is
just a generic prefix rule), then the directory only constraint
was having "a/b/c/d/file" match the first rule and not the second.
This was fixed by having ignore directory-only rules test a rule
against the prefix of a file with LEADINGDIR enabled.
Lastly, spot checks for ignores using `git_ignore_path_is_ignored`
were tested from the top directory down to the bottom to deal with
the containment problem, but this is wrong. We have to test bottom
to top so that negative subdirectory rules will be checked before
parent ignore rules.
This does change the behavior of some existing tests, but it seems
only to bring us more in line with core Git, so I think those
changes are acceptable.
|
|
|
17ef678c
|
2014-04-21T11:55:57
|
|
Fix some coverity-found issues
|
|
|
6a0956e5
|
2014-04-18T10:32:35
|
|
Pop ignore only if whole relative path matches
When traversing the directory structure, the iterator pushes and
pops ignore files using a vector. Some directories don't have
ignore files, so it uses a path comparison to decide when it is
right to actually pop the last ignore file. This was only
comparing directory suffixes, though, so a subdirectory with the
same name as a parent could result in the parent's .gitignore
being popped off the list ignores too early. This changes the
logic to compare the entire relative path of the ignore file.
|
|
|
823c0e9c
|
2014-04-17T11:53:13
|
|
Fix broken logic for attr cache invalidation
The checks to see if files were out of date in the attibute cache
was wrong because the cache-breaker data wasn't getting stored
correctly. Additionally, when the cache-breaker triggered, the
old file data was being leaked.
|
|
|
e6e8530a
|
2014-04-14T12:31:17
|
|
Lock attribute file while reparsing data
I don't love this approach, but achieving thread-safety for
attribute and ignore data while reloading files would require a
larger rewrite in order to avoid this. If an attribute or ignore
file is out of date, this holds a lock on the file while we are
reloading the data so that another thread won't try to reload the
data at the same time.
|
|
|
2e9d813b
|
2014-04-11T12:12:47
|
|
Fix tests with new attr cache code
|
|
|
7d490872
|
2014-04-10T22:31:01
|
|
Attribute file cache refactor
This is a big refactoring of the attribute file cache to be a bit
simpler which in turn makes it easier to enforce a lock around any
updates to the cache so that it can be used in a threaded env.
Tons of changes to the attributes and ignores code.
|
|
|
cef170ab
|
2014-03-14T16:45:46
|
|
Fix leak when using push and pop with ignores
The iterator pushes and pops ignores incrementally onto a list as
it traverses the directory structure so that it doesn't have to
constantly recheck which ignore files apply. With the new ref
counting, it wasn't decrementing the refcount on the ignores that
it removed from the vector.
|
|
|
b8777615
|
2014-03-14T15:37:42
|
|
Fix refcount issues with mutex protected ignores
Some ignore files were not being freed from the cache.
|
|
|
a9528b8f
|
2014-04-14T15:59:48
|
|
Fix core.excludesfile named .gitignore
Ignore rules with slashes in them are matched using FNM_PATHNAME
and use the path to the .gitignore file from the root of the
repository along with the path fragment (including slashes) in
the ignore file itself. Unfortunately, the relative path to the
.gitignore file was being applied to the global core.excludesfile
if that was also named ".gitignore".
This fixes that with more precise matching and includes test for
ignore rules with leading slashes (which were the primary example
of this being broken in the real world).
This also backports an improvement to the file context logic from
the threadsafe-iterators branch where we don't rely on mutating
the key of the attribute file name to generate the context path.
|
|
|
8f7bc646
|
2014-04-10T16:33:39
|
|
Fix bug popping ignore files during wd iteration
There were a couple bugs in popping ignore files during iteration
that could result in incorrect decisions be made and thus ignore
files below the root either not being loaded correctly or not
being popped at the right time.
One bug was an off-by-one in comparing the path of the gitignore
file with the path being exited during iteration.
The second bug was not correctly truncating the path being tracked
during traversal if there were no ignores on the list (i.e. when
you have no .gitignore at the root, but do have some in contained
directories).
|
|
|
25e0b157
|
2013-12-06T15:07:57
|
|
Remove converting user error to GIT_EUSER
This changes the behavior of callbacks so that the callback error
code is not converted into GIT_EUSER and instead we propagate the
return value through to the caller. Instead of using the
giterr_capture and giterr_restore functions, we now rely on all
functions to pass back the return value from a callback.
To avoid having a return value with no error message, the user
can call the public giterr_set_str or some such function to set
an error message. There is a new helper 'giterr_set_callback'
that functions can invoke after making a callback which ensures
that some error message was set in case the callback did not set
one.
In places where the sign of the callback return value is
meaningful (e.g. positive to skip, negative to abort), only the
negative values are returned back to the caller, obviously, since
the other values allow for continuing the loop.
The hardest parts of this were in the checkout code where positive
return values were overloaded as meaningful values for checkout.
I fixed this by adding an output parameter to many of the internal
checkout functions and removing the overload. This added some
code, but it is probably a better implementation.
There is some funkiness in the network code where user provided
callbacks could be returning a positive or a negative value and
we want to rely on that to cancel the loop. There are still a
couple places where an user error might get turned into GIT_EUSER
there, I think, though none exercised by the tests.
|
|
|
dab89f9b
|
2013-12-04T21:22:57
|
|
Further EUSER and error propagation fixes
This continues auditing all the places where GIT_EUSER is being
returned and making sure to clear any existing error using the
new giterr_user_cancel helper. As a result, places that relied
on intercepting GIT_EUSER but having the old error preserved also
needed to be cleaned up to correctly stash and then retrieve the
actual error.
Additionally, as I encountered places where error codes were not
being propagated correctly, I tried to fix them up. A number of
those fixes are included in the this commit as well.
|
|
157cef10
|
2013-10-28T12:57:15
|
|
The "common.h" should be included before "config.h".
When building libgit2 for ia32 architecture on a x64 machine, including
"config.h" without a "common.h" would result the following error:
C:\Program Files\Microsoft SDKs\Windows\v7.1\include\winbase.h(2288): error C2373: 'InterlockedIncrement' : redefinition; different type modifiers [C:\cygwin\home\zcbenz\codes\git-utils\build\libgit2.vcxproj]
C:\Program Files\Microsoft SDKs\Windows\v7.1\include\winbase.h(2295): error C2373: 'InterlockedDecrement' : redefinition; different type modifiers [C:\cygwin\home\zcbenz\codes\git-utils\build\libgit2.vcxproj]
C:\Program Files\Microsoft SDKs\Windows\v7.1\include\winbase.h(2303): error C2373: 'InterlockedExchange' : redefinition; different type modifiers [C:\cygwin\home\zcbenz\codes\git-utils\build\libgit2.vcxproj]
C:\Program Files\Microsoft SDKs\Windows\v7.1\include\winbase.h(2314): error C2373: 'InterlockedExchangeAdd' : redefinition; different type modifiers [C:\cygwin\home\zcbenz\codes\git-utils\build\libgit2.vcxproj]
|
|
|
ba8b8c04
|
2013-08-07T09:17:20
|
|
Improve building ignore file lists
The routines to push and pop ignore files while traversing a
directory had some issues. In particular, setting up the initial
list would sometimes push an ignore file before it ought to be
applied if the starting path was a directory containing an ignore
file. Also, the pop function was not always matching the right
part of the path and would fail to pop ignores from the list in
some cases.
This adds some tests that exercise a particular problematic case
and then fixes the problems that I could find related to this.
At some point, I'd like to isolate this ignore rule management
code and rewrite it, but that's a larger project and right now,
I'll opt to just try to fix the broken behaviors.
|
|
|
3bc3ed80
|
2013-08-09T10:06:23
|
|
Improve and comment git_ignore__pop_dir
This just cleans up the improved logic for popping ignore dirs
and documents why the complex behavior is needed.
|
|
|
4ba64794
|
2013-08-09T10:52:35
|
|
Revert PR #1462 and provide alternative fix
This rolls back the changes to fnmatch parsing from commit
2e40a60e847d6c128af23e24ea7a8efebd2427da except for the tests
that were added. Instead this adds couple of new flags that can
be passed in when attempting to parse an fnmatch pattern. Also,
this changes the pathspec match logic to special case matching a
filename with a '!' prefix against a negative pattern.
This fixes the build.
|
|
|
33d532dc
|
2013-08-09T09:32:06
|
|
Merge pull request #1462 from yorah/fix/libgit2sharp-issue-379
status: fix handling of filenames with special prefixes
|
|
|
85b8b18b
|
2013-06-19T15:22:48
|
|
Add fn to check pathspec for ignored files
Command line Git sometimes generates an error message if given a
pathspec that contains an exact match to an ignored file (provided
--force isn't also given). This adds an internal function that
makes it easy to check it that has happened. Right now, I'm not
creating a public API for this because that would get a little
more complicated with a need for callbacks for all invalid paths.
|
|
|
eac76c23
|
2013-04-22T14:27:36
|
|
Use config cache where possible
This converts many of the config lookups that are done around the
library to use the repository config cache. This was everything I
could find that wasn't part of diff (which requires a larger fix).
|
|
2e40a60e
|
2013-04-11T17:29:05
|
|
status: fix handling of filenames with special prefixes
Fix libgit2/libgit2sharp#379
|
|
|
5540d947
|
2013-03-15T16:39:00
|
|
Implement global/system file search paths
The goal of this work is to expose the search logic for "global",
"system", and "xdg" files through the git_libgit2_opts() interface.
Behind the scenes, I changed the logic for finding files to have a
notion of a git_strarray that represents a search path and to store
a separate search path for each of the three tiers of config file.
For each tier, I implemented a function to initialize it to default
values (generally based on environment variables), and then general
interfaces to get it, set it, reset it, and prepend new directories
to it.
Next, I exposed these interfaces through the git_libgit2_opts
interface, reusing the GIT_CONFIG_LEVEL_SYSTEM, etc., constants
for the user to control which search path they were modifying.
There are alternative designs for the opts interface / argument
ordering, so I'm putting this phase out for discussion.
Additionally, I ended up doing a little bit of clean up regarding
attr.h and attr_file.h, adding a new attrcache.h so the other two
files wouldn't have to be included in so many places.
|
|
|
02df42dd
|
2012-11-19T16:33:30
|
|
Set up default internal ignores
This adds "." ".." and ".git" to the internal ignores list by
default - asking about paths with these files will always say
that they are ignored.
|
|
|
52032ae5
|
2012-10-15T12:48:43
|
|
Fix single-file ignore checks
To answer if a single given file should be ignored, the path to
that file has to be processed progressively checking that there
are no intermediate ignored directories in getting to the file
in question. This enables that, fixing the broken old behavior,
and adds tests to exercise various ignore situations.
|
|
edb456c3
|
2012-10-08T16:32:43
|
|
Fix a bug where ignorecase wasn't applied to ignores
|
|
|
ec40b7f9
|
2012-09-17T15:42:41
|
|
Support for core.ignorecase
|
|
|
11684104
|
2012-08-24T13:41:45
|
|
Fix crash with adding internal ignores
Depending on what you had done before adding new items to the
internal ignores list, it was possible for the cache of ignore
data to be uninitialized.
|
|
|
2fb4e9b3
|
2012-08-22T11:42:00
|
|
Wrap up ignore API and add tests
This fills out the ignore API and adds tests.
|
|
|
f004c4a8
|
2012-08-21T17:26:39
|
|
Add public API for internal ignores
This creates a public API for adding to the internal ignores
list, which already existing but was not accessible.
This adds the new default value for core.excludesfile also.
|
|
b8457baa
|
2012-07-24T07:57:58
|
|
portability: Improve x86/amd64 compatibility
|
|
|
9939e602
|
2012-06-11T09:24:02
|
|
Ignores allow unescapes internal whitespace
|
|
|
904b67e6
|
2012-05-18T01:48:50
|
|
errors: Rename error codes
|
|
|
e172cf08
|
2012-05-18T01:21:06
|
|
errors: Rename the generic return codes
|
|
|
b709e951
|
2012-05-04T11:06:12
|
|
Fix memory leaks and use after free
|
|
|
f917481e
|
2012-05-03T16:37:25
|
|
Support reading attributes from index
Depending on the operation, we need to consider gitattributes
in both the work dir and the index. This adds a parameter to
all of the gitattributes related functions that allows user
control of attribute reading behavior (i.e. prefer workdir,
prefer index, only use index).
This fix also covers allowing us to check attributes (and
hence do diff and status) on bare repositories.
This was a somewhat larger change that I hoped because it had
to change the cache key used for gitattributes files.
|
|
|
d58336dd
|
2012-04-26T10:51:45
|
|
Fix leading slash behavior in attrs/ignores
We were not following the git behavior for leading slashes
in path names when matching git ignores and git attribute
file patterns. This should fix issue #638.
|
|
|
19fa2bc1
|
2012-04-17T15:12:50
|
|
Convert attrs and diffs to use string pools
This converts the git attr related code (including ignores) and
the git diff related code (and implicitly the status code) to use
`git_pools` for storing strings. This reduces the number of small
blocks allocated dramatically.
|
|
|
95dfb031
|
2012-03-30T14:40:50
|
|
Improve config handling for diff,submodules,attrs
This adds support for a bunch of core.* settings that affect
diff and status, plus fixes up some incorrect implementations
of those settings from before. Also, this cleans up the
handling of config settings in the new submodules code and
in the old attrs/ignore code.
|
|
0d0fa7c3
|
2012-03-16T15:56:01
|
|
Convert attr, ignore, mwindow, status to new errors
Also cleaned up some previously converted code that still had
little things to polish.
|
|
|
ab43ad2f
|
2012-03-14T11:07:14
|
|
Convert attr and other files to new errors
This continues to add other files to the new error handling
style. I think the only real concerns here are that there are
a couple of error return cases that I have converted to asserts,
but I think that it was the correct thing to do given the new
error style.
|
|
|
13224ea4
|
2012-02-27T04:28:31
|
|
buffer: Unify `git_fbuffer` and `git_buf`
This makes so much sense that I can't believe it hasn't been done
before. Kill the old `git_fbuffer` and read files straight into
`git_buf` objects.
Also: In order to fully support 4GB files in 32-bit systems, the
`git_buf` implementation has been changed from using `ssize_t` for
storage and storing negative values on allocation failure, to using
`size_t` and changing the buffer pointer to a magical pointer on
allocation failure.
Hopefully this won't break anything.
|
|
|
0534641d
|
2012-02-22T15:15:35
|
|
Fix iterators based on pull request feedback
This update addresses all of the feedback in pull request #570.
The biggest change was to create actual linked list stacks for
storing the tree and workdir iterator state. This cleaned up
the code a ton. Additionally, all of the static functions had
their 'git_' prefix removed, and a lot of other unnecessary
changes were removed from the original patch.
|
|
|
b6c93aef
|
2012-02-21T14:46:24
|
|
Uniform iterators for trees, index, and workdir
This create a new git_iterator type of object that provides a
uniform interface for iterating over the index, an arbitrary
tree, or the working directory of a repository.
As part of this, git ignore support was extended to support
push and pop of directory-based ignore files as the working
directory is being traversed (so the array of ignores does
not have to be recreated at each directory during traveral).
There are a number of other small utility functions in buffer,
path, vector, and fileops that are included in this patch
that made the iterator implementation cleaner.
|
|
|
adc9bdb3
|
2012-01-31T13:59:32
|
|
Fix attr path is_dir check
When building an attr path object, the code that checks if the
file is a directory was evaluating the file as a relative path
to the current working directory, instead of using the repo root.
This lead to inconsistent behavior.
|
|
|
63ab73be
|
2012-01-20T11:13:17
|
|
Merge branch 'fix-subdir-attr-paths' into development
This resolves issue #535 and issue #533.
|
|
|
1744fafe
|
2012-01-17T15:49:47
|
|
Move path related functions from fileops to path
This takes all of the functions that look up simple data about
paths (such as `git_futils_isdir`) and moves them over to path.h
(becoming `git_path_isdir`). This leaves fileops.h just with
functions that actually manipulate the filesystem or look at
the file contents in some way.
As part of this, the dir.h header which is really just for win32
support was moved into win32 (with some minor changes).
|
|
|
a51cd8e6
|
2012-01-16T16:58:27
|
|
Fix handling of relative paths for attrs
Per issue #533, the handling of relative paths in attribute
and ignore files was not right. Fixed this by pre-joining
the relative path of the attribute/ignore file onto the match
string when a full path match is required.
Unfortunately, fixing this required a bit more code than I
would have liked because I had to juggle things around so that
the fnmatch parser would have sufficient information to prepend
the relative path when it was needed.
|
|
|
cfbc880d
|
2012-01-16T15:16:44
|
|
Patch cleanup for merge
After reviewing the gitignore support with Vicent, we came up
with a list of minor cleanups to prepare for merge, including:
* checking git_repository_config error returns
* renaming git_ignore_is_ignored and moving to status.h
* fixing next_line skipping to include \r skips
* commenting on where ignores are and are not included
|
|
|
1dbcc9fc
|
2012-01-11T21:07:16
|
|
Fix several memory issues
This contains fixes for several issues discovered by MSVC and
by valgrind, including some bad data access, some memory
leakage (in where certain files were not being successfully
added to the cache), and some code simplification.
|
|
|
0cfcff5d
|
2012-01-11T20:41:55
|
|
Convert git_path_walk_up to regular function
This gets rid of the crazy macro version of git_path_walk_up
and makes it into a normal function that takes a callback
parameter. This turned out not to be too messy.
|
|
|
6a67a812
|
2012-01-11T16:01:48
|
|
Allow ignores (and attribs) for nonexistent files
This fixes issue 532 that attributes (and gitignores) could not
be checked for files that don't exist. It should be possible to
query such things regardless of the existence of the file.
|
|
|
df743c7d
|
2012-01-09T15:37:19
|
|
Initial implementation of gitignore support
Adds support for .gitignore files to git_status_foreach() and
git_status_file(). This includes refactoring the gitattributes
code to share logic where possible. The GIT_STATUS_IGNORED flag
will now be passed in for files that are ignored (provided they
are not already in the index or the head of repo).
|