|
8ab4d0e1
|
2015-09-12T15:32:18
|
|
diff: check pathspec on non-files
When we're not doing pathspec matching, we let the iterator handle
file matching for us. However, we can only trust the iterator to
return *files* that match the pattern, because the iterator must
return directories that are not strictly in the pathlist, but that
are the parents of files that match the pattern, so that diff can
later recurse into them.
Thus, diff must examine non-files explicitly before including them
in the delta list.
|
|
4a0dbeb0
|
2015-08-30T17:06:26
|
|
diff: use new iterator pathlist handling
When using literal pathspecs in diff with `GIT_DIFF_DISABLE_PATHSPEC_MATCH`
turn on the faster iterator pathlist handling.
Updates iterator pathspecs to include directory prefixes (eg, `foo/`)
for compatibility with `GIT_DIFF_DISABLE_PATHSPEC_MATCH`.
|
|
ef206124
|
2015-07-28T19:55:37
|
|
Move filelist into the iterator handling itself.
|
|
ed1c6446
|
2015-07-28T11:41:27
|
|
iterator: use an options struct instead of args
|
|
ccef5adb
|
2015-06-30T09:30:20
|
|
Added git_diff_index_to_index()
|
|
c2e1b058
|
2015-06-05T18:26:49
|
|
Only write index if updated when passing GIT_DIFF_UPDATE_INDEX
When diffing the index with the workdir and GIT_DIFF_UPDATE_INDEX has been passed,
the previous implementation was always writing the index to disk even if it wasn't
modified.
|
|
cc605e73
|
2015-06-23T23:52:03
|
|
Merge pull request #3222 from git-up/conflicted
Fixed GIT_DELTA_CONFLICTED not returned in some cases
|
|
8d8a2eef
|
2015-06-15T11:14:40
|
|
Fixed GIT_DELTA_CONFLICTED not returned in some cases
If an index entry for a file that is not in HEAD is in conflicted state,
when diffing HEAD with the index, the status field of the corresponding git_diff_delta was incorrectly reported as GIT_DELTA_ADDED instead of GIT_DELTA_CONFLICTED.
This was due to handle_unmatched_new_item() initially setting the status
to GIT_DELTA_CONFLICTED but then overriding it later with GIT_DELTA_ADDED.
|
|
ff475375
|
2015-06-17T14:34:10
|
|
diff: check files with the same or newer timestamps
When a file on the workdir has the same or a newer timestamp than the
index, we need to perform a full check of the contents, as the update of
the file may have happened just after we wrote the index.
The iterator changes are such that we can reach inside the workdir
iterator from the diff, though it may be better to have an accessor
instead of moving these structs into the header.
|
|
96dd171e
|
2015-06-19T08:32:26
|
|
diff: preserve original mode in the index
When updating the index during a diff, preserve the original mode,
which prevents us from dropping the mode to what we have interpreted
as on our system (eg, what the working directory claims it to be,
which may be a lie on some systems.)
|
|
10549a2d
|
2015-05-19T18:26:04
|
|
Introduce `GIT_DIFF_FLAG_EXISTS`
Mark the `old_file` and `new_file` sides of a delta with a new bit,
`GIT_DIFF_FLAG_EXISTS`, that introduces that a particular side of
the delta exists in the diff.
This is useful for indicating whether a working directory item exists
or not, in the presence of a conflict. Diff users may have previously
used DELETED to determine this information.
|
|
253a05f7
|
2015-05-19T11:31:15
|
|
diff: prettify `maybe_modified` a little
|
|
9f545b9d
|
2015-05-19T11:23:59
|
|
introduce `git_index_entry_is_conflict`
It's not always obvious the mapping between stage level and
conflict-ness. More importantly, this can lead otherwise sane
people to write constructs like `if (!git_index_entry_stage(entry))`,
which (while technically correct) is unreadable.
Provide a nice method to help avoid such messy thinking.
|
|
191e97a0
|
2015-05-18T18:15:17
|
|
diff conflicts: don't include incorrect ID
Since a diff entry only concerns a single entry, zero the information
for the index side of a conflict. (The index entry would otherwise
erroneously include the lowest-stage index entry - generally the
ancestor of a conflict.)
Test that during status, the index side of the conflict is empty.
|
|
7877146f
|
2015-05-18T15:13:43
|
|
diff: for conflicts w/o workdir, blank nitem side
Make sure that we provide a blanked nitem side when the item does not
exist in the working directory.
|
|
7c948014
|
2015-05-14T14:00:29
|
|
diff/status: introduce conflicts
When diffing against an index, return a new `GIT_DELTA_CONFLICTED`
delta type for items that are conflicted. For a single file path,
only one delta will be produced (despite the fact that there are
multiple entries in the index).
Index iterators now have the (optional) ability to return conflicts
in the index. Prior to this change, they would be omitted, and callers
(like diff) would omit conflicted index entries entirely.
|
|
1b6c26db
|
2015-05-13T17:47:26
|
|
diff: wrap the iterator functions
Wrap the iterator current / advance functions so that we can extend
them, but also handle GIT_ITEROVER cases in the iterator funcs
instead of the callers.
|
|
4beab1f8
|
2015-03-31T16:29:35
|
|
checkout: break case-changes into delete/add
When checking out with a case-insensitive working directory, we
want to change the case of items in the working directory to
reflect changes that occured in the checkout target. Diff now
has an option to break case-changing renames into delete/add.
|
|
db853748
|
2015-04-15T15:28:03
|
|
Fixed GIT_DIFF_UPDATE_INDEX not being aware of executable bit changes
In the prior implementation, enabling GIT_DIFF_UPDATE_INDEX would overwrite
entries in the index with the ones generated from scanning the working if the
OID was the same.
Because this OID comparison ignores file modes, this means an file in the
workdir with only an exec bit difference with the one in the index would end
up being overwritten, resulting in the exec bit being loss. There might be
other related bugs but the fix of comparing OIDs and file modes should
address them all.
|
|
cc93ad16
|
2015-04-15T15:27:59
|
|
Removed unnecessary condition
The variable noid is guaranteed to be zero at this point of the code path.
|
|
35df76bd
|
2015-04-15T15:27:56
|
|
Use git_oid_cpy() instead of memcpy()
|
|
8a3934e4
|
2015-03-11T19:29:36
|
|
Avoid retaining / releasing the index more than necessary when GIT_DIFF_UPDATE_INDEX is enabled
|
|
9a97f49e
|
2014-12-21T15:31:03
|
|
config: borrow refcounted references
This changes the get_entry() method to return a refcounted version of
the config entry, which you have to free when you're done.
This allows us to avoid freeing the memory in which the entry is stored
on a refresh, which may happen at any time for a live config.
For this reason, get_string() has been forbidden on live configs and a
new function get_string_buf() has been added, which stores the string in
a git_buf which the user then owns.
The functions which parse the string value takea advantage of the
borrowing to parse safely and then release the entry.
|
|
795eaccd
|
2015-02-19T11:09:54
|
|
git_filter_opt_t -> git_filter_flag_t
For consistency with the rest of the library, where an opt is an
options *structure*.
|
|
f1453c59
|
2015-02-12T12:19:37
|
|
Make our overflow check look more like gcc/clang's
Make our overflow checking look more like gcc and clang's, so that
we can substitute it out with the compiler instrinsics on platforms
that support it. This means dropping the ability to pass `NULL` as
an out parameter.
As a result, the macros also get updated to reflect this as well.
|
|
392702ee
|
2015-02-09T23:41:13
|
|
allocations: test for overflow of requested size
Introduce some helper macros to test integer overflow from arithmetic
and set error message appropriately.
|
|
0beb7fe4
|
2014-12-24T11:44:17
|
|
Added missing error handling path
|
|
f7fcb18f
|
2014-11-23T14:12:54
|
|
Plug leaks
Valgrind is now clean except for libssl and libgcrypt.
|
|
62a617dc
|
2014-11-06T16:16:46
|
|
iterator: submodules are determined by an index or tree
We cannot know from looking at .gitmodules whether a directory is a
submodule or not. We need the index or tree we are comparing against to
tell us. Otherwise we have to assume the entry in .gitmodules is stale
or otherwise invalid.
Thus we pass the index of the repository into the workdir iterator, even
if we do not want to compare against it. This follows what git does,
which even for `git diff <tree>`, it will consider staged submodules as
such.
|
|
d88766c4
|
2014-10-26T10:40:46
|
|
Changed context_lines and interhunk_lines to uint32_t to match struct s_xdemitconf
|
|
dc49e1b5
|
2014-06-04T15:36:28
|
|
Merge remote-tracking branch 'origin/development' into fix-git-status-list-new-unreadable-folder
Conflicts:
include/git2/diff.h
|
|
5e654200
|
2014-06-04T11:53:44
|
|
Implement GIT_DIFF_INCLUDE_UNREADABLE_AS_UNTRACKED
|
|
c4366096
|
2014-05-23T00:28:12
|
|
Don't need to duplicate this code.
|
|
e8cc3032
|
2014-05-22T19:43:58
|
|
Return GIT_DELTA_UNREADABLE for a file with a mode change
|
|
9067d5af
|
2014-05-21T23:13:24
|
|
Remove errant whitespace.
|
|
86c9d3da
|
2014-05-21T22:54:34
|
|
Return GIT_FILEMODE_UNREADABLE for files that fail to stat.
|
|
61bef72d
|
2014-05-20T23:57:40
|
|
Start adding GIT_DELTA_UNREADABLE and GIT_STATUS_WT_UNREADABLE.
|
|
f47bc8ff
|
2014-05-20T18:16:04
|
|
Skip unreadable files for now.
|
|
2b52a0bf
|
2014-05-13T16:32:27
|
|
Increase use of config snapshots
And decrease extra reload checks of config data.
|
|
03fcef18
|
2014-05-13T12:40:13
|
|
Merge pull request #2328 from libgit2/rb/how-broken-can-ignores-be
Improve checks for ignore containment
|
|
5269008c
|
2014-05-06T16:01:49
|
|
Add filter options and ALLOW_UNSAFE
Diff and status do not want core.safecrlf to actually raise an
error regardless of the setting, so this extends the filter API
with an additional options flags parameter and adds a flag so that
filters can be applied with GIT_FILTER_OPT_ALLOW_UNSAFE, indicating
that unsafe filter application should be downgraded from a failure
to a warning.
|
|
f554611a
|
2014-05-06T12:41:26
|
|
Improve checks for ignore containment
The diff code was using an "ignored_prefix" directory to track if
a parent directory was ignored that contained untracked files
alongside tracked files. Unfortunately, when negative ignore rules
were used for directories inside ignored parents, the wrong rules
were applied to untracked files inside the negatively ignored
child directories.
This commit moves the logic for ignore containment into the workdir
iterator (which is a better place for it), so the ignored-ness of
a directory is contained in the frame stack during traversal. This
allows a child directory to override with a negative ignore and yet
still restore the ignored state of the parent when we traverse out
of the child.
Along with this, there are some problems with "directory only"
ignore rules on container directories. Given "a/*" and "!a/b/c/"
(where the second rule is a directory rule but the first rule is
just a generic prefix rule), then the directory only constraint
was having "a/b/c/d/file" match the first rule and not the second.
This was fixed by having ignore directory-only rules test a rule
against the prefix of a file with LEADINGDIR enabled.
Lastly, spot checks for ignores using `git_ignore_path_is_ignored`
were tested from the top directory down to the bottom to deal with
the containment problem, but this is wrong. We have to test bottom
to top so that negative subdirectory rules will be checked before
parent ignore rules.
This does change the behavior of some existing tests, but it seems
only to bring us more in line with core Git, so I think those
changes are acceptable.
|
|
9c8ed499
|
2014-04-29T15:05:58
|
|
Remove trace / add git_diff_perfdata struct + api
|
|
7a2e56a3
|
2014-04-29T14:30:15
|
|
Get rid of redundant git_diff_options_init fn
Since git_diff_init_options was introduced, remove this old fn.
|
|
b23b112d
|
2014-04-29T11:29:49
|
|
Add payloads, bitmaps to trace API
This is a proposed adjustment to the trace APIs. This makes the
trace levels into a bitmask so that they can be selectively enabled
and adds a callback-level payload, plus a message-level payload.
This makes it easier for me to a GIT_TRACE_PERF callbacks that
are simply bypassed if the PERF level is not set.
|
|
cd424ad5
|
2014-04-28T16:39:53
|
|
Add GIT_STATUS_OPT_UPDATE_INDEX and use trace API
This adds an option to refresh the stat cache while generating
status. It also rips out the GIT_PERF stuff I had an makes use
of the trace API to keep statistics about what happens during diff.
|
|
94fb4aad
|
2014-04-28T14:48:41
|
|
Add diff option to update index stat cache
When diff is scanning the working directory, if it finds a file
where it is not sure if the index entry matches the working dir,
it will recalculate the OID (which is pretty expensive). This
adds a new flag to diff so that if the OID calculation finds that
the file actually has not changed (i.e. just the modified time was
altered or such), then it will refresh the stat cache in the index
so that future calls to diff will not have to check the oid again.
|
|
0fc8e1f6
|
2014-04-28T14:34:55
|
|
Lay groundwork for updating stat cache in diff
This reorganized the diff OID calculation to make it easier to
correctly update the stat cache during a diff once the flags to
do so are enabled.
This includes marking the path of a git_index_entry as const so
we can make a "fake" git_index_entry with a "const char *" path
and not get warnings. I was a little surprised at how unobtrusive
this change was, but I think it's probably a good thing.
|
|
bc91347b
|
2014-04-30T11:16:31
|
|
Fix remaining init_options inconsistencies
There were a couple of "init_opts()" functions a few more cases
of structure initialization that I somehow missed.
|
|
702efc89
|
2014-04-30T10:57:42
|
|
Make init_options fns use unsigned ints and macro
Use an unsigned int for the version and add a helper macro so the
code is simplified (and so the error message is a common string).
|
|
8ef4e11a
|
2014-04-28T14:16:26
|
|
Skip diff oid calc when size definitely changed
When we think the stat cache in the index seems valid and the size
or mode of a file has definitely changed, then don't bother trying
to recalculate the OID of the workdir bits to confirm that it is
modified - just accept that it is modified.
This can result in files that show as modified with no actual diff,
but the behavior actually appears to match Git on the command line.
This also includes a minor optimization to not perform a submodule
lookup on the ".git" directory itself.
|
|
240f4af3
|
2014-04-28T14:04:29
|
|
Add build option for diff internal statistics
|
|
2ad51b81
|
2014-04-25T02:04:12
|
|
Merge pull request #2241 from libgit2/rb/stash-skip-submodules
Improve stash and checkout for ignored + untracked items
|
|
219c89d1
|
2014-04-23T16:28:45
|
|
Treat ignored, empty, and untracked dirs different
In the iterator, distinguish between ignores and empty directories
so that diff and status can ignore empty directories, but checkout
and stash can treat them as untracked items.
|
|
37da3685
|
2014-04-22T21:51:54
|
|
Make checkout match diff for untracked/ignored dir
When diff finds an untracked directory, it emulates Git behavior
by looking inside the directory to see if there are any untracked
items inside it. If there are only ignored items inside the dir,
then diff considers it ignored, even if there is no direct ignore
rule for it.
Checkout was not copying this behavior - when it found an untracked
directory, it just treated it as untracked. Unfortunately, when
combined with GIT_CHECKOUT_REMOVE_UNTRACKED, this made is seem that
checkout (and stash, which uses checkout) was removing ignored
items when you had only asked it to remove untracked ones.
This commit moves the logic for advancing past an untracked dir
while scanning for non-ignored items into an iterator helper fn,
and uses that for both diff and checkout.
|
|
8d09efa2
|
2014-04-22T12:33:27
|
|
Use git_diff_get_stats in example/diff + refactor
This takes the `--stat` and related example options in the example
diff.c program and converts them to use the `git_diff_get_stats`
API which nicely formats stats for you.
I went to add bar-graph scaling to the stats formatter and noticed
that the `git_diff_stats` structure was holding on to all of the
`git_patch` objects. Unfortunately, each of these objects keeps
the full text of the diff in memory, so this is very expensive. I
ended up modifying `git_diff_stats` to keep just the data that it
needs to keep and allowed it to release the patches. Then, I added
width scaling to the output on top of that.
In making the diff example program match 'git diff' output, I ended
up removing an newline from the sumamry output which I then had to
compensate for in the email formatting to match the expectations.
Lastly, I went through and refactored the tests to use a couple of
helper functions and reduce the overall amount of code there.
|
|
3b4c401a
|
2014-02-10T13:20:08
|
|
Decouple index iterator sort from index
This makes the index iterator honor the GIT_ITERATOR_IGNORE_CASE
and GIT_ITERATOR_DONT_IGNORE_CASE flags without modifying the
index data itself. To take advantage of this, I had to export a
number of the internal index entry comparison functions. I also
wrote some new tests to exercise the capability.
|
|
a56b418d
|
2014-04-11T22:57:15
|
|
Sanitize git_diff_format_email_options' summary parameter
It will form part of the subject line and should thus be one line.
|
|
d8cc1fb6
|
2014-04-11T19:15:15
|
|
Introduce git_diff_format_email and git_diff_commit_as_email
|
|
eb7e17cc
|
2014-04-08T14:47:20
|
|
Update submodules with parent-tracked content
This updates how libgit2 treats submodule-like directories that
actually have tracked content inside of them. This is a strange
corner case, but it seems that many people have abortive submodule
setups and then just went ahead and added the files into the
parent repository. In this case, we should just treat the
submodule as if it was a normal directory.
Libgit2 will still try to skip over real submodules and contained
repositories that do not have tracked files inside them, but this
adds some new handling for cases where the apparently submodule
data is in conflict with the actual list of tracked files.
|
|
ea1ca3c9
|
2014-04-01T21:30:52
|
|
Fix skipping content of contained repos
When doing a diff for use in status, we should never show the
content of a git repository contained inside another one. The
logic to do this was looking for a .git directory and so when a
gitlink plain .git file was used, it was failing to exclude the
directory content.
|
|
a15c7802
|
2014-03-25T09:14:48
|
|
Make submodules externally refcounted
`git_submodule` objects were already refcounted internally in case
the submodule name was different from the path at which it was
stored. This makes that refcounting externally used as well, so
`git_submodule_lookup` and `git_submodule_add_setup` return an
object that requires a `git_submodule_free` when done.
|
|
b9f81997
|
2014-03-05T21:49:23
|
|
Added function-based initializers for every options struct.
The basic structure of each function is courtesy of arrbee.
|
|
9950bb4e
|
2014-01-24T20:23:17
|
|
diff: rename the file's 'oid' to 'id'
In the same vein as the previous commits in this series.
|
|
d541170c
|
2014-01-24T11:36:41
|
|
index: rename an entry's id to 'id'
This was not converted when we converted the rest, so do it now.
|
|
9cfce273
|
2013-12-12T12:11:38
|
|
Cleanups, renames, and leak fixes
This renames git_vector_free_all to the better git_vector_free_deep
and also contains a couple of memory leak fixes based on valgrind
checks. The fixes are specifically: failure to free global dir
path variables when not compiled with threading on and failure to
free filters from the filter registry that had not be initialized
fully.
|
|
26c1cb91
|
2013-12-09T09:44:03
|
|
One more rename/cleanup for callback err functions
|
|
c7b3e1b3
|
2013-12-06T15:42:20
|
|
Some callback error check style cleanups
I find this easier to read...
|
|
25e0b157
|
2013-12-06T15:07:57
|
|
Remove converting user error to GIT_EUSER
This changes the behavior of callbacks so that the callback error
code is not converted into GIT_EUSER and instead we propagate the
return value through to the caller. Instead of using the
giterr_capture and giterr_restore functions, we now rely on all
functions to pass back the return value from a callback.
To avoid having a return value with no error message, the user
can call the public giterr_set_str or some such function to set
an error message. There is a new helper 'giterr_set_callback'
that functions can invoke after making a callback which ensures
that some error message was set in case the callback did not set
one.
In places where the sign of the callback return value is
meaningful (e.g. positive to skip, negative to abort), only the
negative values are returned back to the caller, obviously, since
the other values allow for continuing the loop.
The hardest parts of this were in the checkout code where positive
return values were overloaded as meaningful values for checkout.
I fixed this by adding an output parameter to many of the internal
checkout functions and removing the overload. This added some
code, but it is probably a better implementation.
There is some funkiness in the network code where user provided
callbacks could be returning a positive or a negative value and
we want to rely on that to cancel the loop. There are still a
couple places where an user error might get turned into GIT_EUSER
there, I think, though none exercised by the tests.
|
|
fcd324c6
|
2013-12-06T15:04:31
|
|
Add git_vector_free_all
There are a lot of places that we call git__free on each item in
a vector and then call git_vector_free on the vector itself. This
just wraps that up into one convenient helper function.
|
|
96869a4e
|
2013-12-03T16:45:39
|
|
Improve GIT_EUSER handling
This adds giterr_user_cancel to return GIT_EUSER and clear any
error message that is sitting around. As a result of using that
in places, we need to be more thorough with capturing errors that
happen inside a callback when used internally. To help with that,
this also adds giterr_capture and giterr_restore so that when we
internally use a foreach-type function that clears errors and
converts them to GIT_EUSER, it is easier to restore not just the
return value, but the actual error message text.
|
|
9f77b3f6
|
2013-11-25T14:21:34
|
|
Add config read fns with controlled error behavior
This adds `git_config__lookup_entry` which will look up a key in
a config and return either the entry or NULL if the key was not
present. Optionally, it can either suppress all errors or can
return them (although not finding the key is not an error for this
function). Unlike other accessors, this does not normalize the
config key string, so it must only be used when the key is known
to be in normalized form (i.e. all lower-case before the first dot
and after the last dot, with no invalid characters).
This also adds three high-level helper functions to look up config
values with no errors and a fallback value. The three functions
are for string, bool, and int values, and will resort to the
fallback value for any error that arises. They are:
* `git_config__get_string_force`
* `git_config__get_bool_force`
* `git_config__get_int_force`
None of them normalize the config `key` either, so they can only
be used for internal cases where the key is known to be in normal
format.
|
|
3e57069e
|
2013-11-01T13:49:43
|
|
Fix --assume-unchanged support
This was never really working right because we were checking the
wrong flag and not checking it in all the places that we need to
be checking it. I finally got around to writing a test and adding
actual support for it.
|
|
a5c16f3c
|
2013-11-01T10:18:03
|
|
Add git_diff_options_init helper
Sometimes the static initializer for git_diff_options cannot be
used and since setting them to all zeroes doesn't actually work
quite right, this adds a new helper for that situation.
This also adds an explicit new value to the submodule settings
options to be used when those enums need static initialization.
|
|
8e5a8ef8
|
2013-11-01T09:51:01
|
|
Convert git_index_read to have a "force" flag
This is a little more intuitive than the turned-around option that
I originally wrote.
|
|
4bf630b6
|
2013-10-31T14:36:52
|
|
Make diff and status perform soft index reload
This changes `git_index_read` to have two modes - a hard index
reload that always resets the index to match the on-disk data
(which was the old behavior) and a soft index reload that uses
the timestamp / file size information and only replaces the index
data if the file on disk has been modified.
This then updates the git_status code to do a soft reload unless
the new GIT_STATUS_OPT_NO_REFRESH flag is passed in.
This also changes the behavior of the git_diff functions that use
the index so that when an index is not explicitly passed in (i.e.
when the functions call git_repository_index for you), they will
also do a soft reload for you.
This intentionally breaks the file signature of git_index_read
because there has been some confusion about the behavior previously
and it seems like all existing uses of the API should probably be
examined to select the desired behavior.
|
|
3940310e
|
2013-10-30T13:56:42
|
|
Fix some of the glaring errors in GIT_DIFF_REVERSE
These changes fix the basic problem with GIT_DIFF_REVERSE being
broken for text diffs. The reversed diff entries were getting
added to the git_diff correctly, but some of the metadata was kept
incorrectly in a way that prevented the text diffs from being
generated correctly. Once I fixed that, it became clear that it
was not possible to merge reversed diffs correctly. This has a
first pass at fixing that problem. We probably need more tests
to make sure that is really fixed thoroughly.
|
|
74a627f0
|
2013-10-21T09:07:19
|
|
Tweak to git_diff_delta structure for nfiles
While the base git_diff_delta structure always contains two files,
when we introduce conflict data, it will be helpful to have an
indicator when an additional file is involved.
|
|
10672e3e
|
2013-10-15T15:10:07
|
|
Diff API cleanup
This lays groundwork for separating formatting options from diff
creation options. This groups the formatting flags separately
from the diff list creation flags and reorders the options. This
also tweaks some APIs to further separate code that uses patches
from code that just looks at git_diffs.
|
|
3ff1d123
|
2013-10-11T14:51:54
|
|
Rename diff objects and split patch.h
This makes no functional change to diff but renames a couple of
the objects and splits the new git_patch (formerly git_diff_patch)
into a new header file.
|
|
92d19d16
|
2013-09-21T09:34:03
|
|
Merge pull request #1840 from linquize/warning
Fix warning
|
|
66566516
|
2013-09-08T17:15:42
|
|
Fix warning
|
|
4b11f25a
|
2013-09-11T16:38:33
|
|
Add ident filter
This adds the ident filter (that knows how to replace $Id$) and
tweaks the filter APIs and code so that git_filter_source objects
actually have the updated OID of the object being filtered when
it is a known value.
|
|
85d54812
|
2013-08-28T16:44:04
|
|
Create public filter object and use it
This creates include/sys/filter.h with a basic definition of a
git_filter and then converts the internal code to use it. There
are related internal objects (git_filter_list) that we will want
to publish at some point, but this is a first step.
|
|
e38f0d69
|
2013-08-05T14:06:41
|
|
Add rename from rewrites to status
In git_diff_paired_foreach, temporarily resort the
index->workdir diff list by index path so that we can
track a rename in the workdir from head->index->workdir.
|
|
125655fe
|
2013-07-02T16:49:57
|
|
Untracked directories with .git should be ignored
This restores a behavior that was accidentally lost during some
diff refactoring where an untracked directory that contains a .git
item should be treated as IGNORED, not as UNTRACKED. The submodule
code already detects this, but the diff code was not handling the
scenario right.
This also updates a number of existing tests that were actually
exercising the behavior but did not have the right expectations in
place. It actually makes the new
`test_diff_submodules__diff_ignore_options` test feel much better
because the "not-a-submodule" entries are now ignored instead of
showing up as untracked items.
Fixes #1697
|
|
f9775a37
|
2013-06-29T23:22:31
|
|
Add ignore_submodules to diff options
This adds correct support for an equivalent to --ignore-submodules
in diff, where an actual ignore value can be passed to diff to
override the per submodule settings in the configuration.
This required tweaking the constants for ignore values so that
zero would not be used and could represent an unset option to the
diff. This was an opportunity to move the submodule values into
include/git2/types.h and to rename the poorly named DEFAULT values
for ignore and update constants to RESET instead.
Now the GIT_DIFF_IGNORE_SUBMODULES flag is exactly the same as
setting the ignore_submodules option to GIT_SUBMODULE_IGNORE_ALL
(which is actually a minor change from the old behavior in that
submodules will now be treated as UNMODIFIED deltas instead of
being left out totally - if you set GIT_DIFF_INCLUDE_UNMODIFIED).
This includes tests for the various new settings.
|
|
2e3e273e
|
2013-06-29T13:20:45
|
|
Update diff to new internal submodule status API
Submodules now expose an internal status API that allows diff to
get back the OID values from the submodule very easily and also
to avoiding caching issues and to override the ignore setting for
the submodule.
|
|
2b672d5b
|
2013-07-08T22:46:36
|
|
Add git_pathspec_match_diff API
This adds an additional pathspec API that will match a pathspec
against a diff object. This is convenient if you want to handle
renames (so you need the whole diff and can't use the pathspec
constraint built into the diff API) but still want to tell if the
diff had any files that matched the pathspec.
When the pathspec is matched against a diff, instead of keeping
a list of filenames that matched, instead the API keeps the list
of git_diff_deltas that matched and they can be retrieved via a
new API git_pathspec_match_list_diff_entry.
There are a couple of other minor API extensions here that were
mostly for the sake of convenience and to reduce dependencies
on knowing the internal data structure between files inside the
library.
|
|
d2ce27dd
|
2013-06-24T23:16:06
|
|
Add public API for pathspec matching
This adds a new public API for compiling pathspecs and matching
them against the working directory, the index, or a tree from the
repository. This also reworks the pathspec internals to allow the
sharing of code between the existing internal usage of pathspec
matching and the new external API.
While this is working and the new API is ready for discussion, I
think there is still an incorrect behavior in which patterns are
always matched against the full path of an entry without taking
the subdirectories into account (so "s*" will match "subdir/file"
even though it wouldn't with core Git). Further enhancements are
coming, but this was a good place to take a functional snapshot.
|
|
2a16914c
|
2013-07-03T12:20:34
|
|
Remove GIT_STATUS_SHOW_INDEX_THEN_WORKDIR option
This option serves no benefit now that the git_status_list API
is available. It was of questionable value before and now it
would just be a bad idea to use it rather than the indexed API.
|
|
9b6075b2
|
2013-07-03T17:07:20
|
|
Fix segfault in git_status_foreach_ext()
Add tests for the `GIT_STATUS_SHOW_XXX` flags.
|
|
22b6b82f
|
2013-06-20T12:16:06
|
|
Add status flags to force output sort order
Files in status will, be default, be sorted according to the case
insensitivity of the filesystem that we're running on. However,
in some cases, this is not desirable. Even on case insensitive
file systems, 'git status' at the command line will generally use
a case sensitive sort (like 'ls'). Some GUIs prefer to display a
list of file case insensitively even on case-sensitive platforms.
This adds two new flags: GIT_STATUS_OPT_SORT_CASE_SENSITIVELY
and GIT_STATUS_OPT_SORT_CASE_INSENSITIVELY that will override the
default sort order of the status output and give the user control.
This includes tests for exercising these new options and makes
the examples/status.c program emulate core Git and always use a
case sensitive sort.
|
|
852ded96
|
2013-06-20T11:37:58
|
|
Fix bug in diff untracked dir scan
When scanning untracked directories looking for non-ignored files
there was a bug where an empty directory would generate a false
error.
|
|
f30fff45
|
2013-06-19T15:27:25
|
|
Add index pathspec-based operations
This adds three new public APIs for manipulating the index:
1. `git_index_add_all` is similar to `git add -A` and will add
files in the working directory that match a pathspec to the
index while honoring ignores, etc.
2. `git_index_remove_all` removes files from the index that match
a pathspec.
3. `git_index_update_all` updates entries in the index based on
the current contents of the working directory, either added
the new information or removing the entry from the index.
|
|
eefef642
|
2013-06-13T16:09:53
|
|
Always do tree to index diffs case sensitively
Trees are always case sensitive. The index is always case
preserving and will be case sensitive when it is turned into a
tree. Therefore the tree and the index can and should always
be compared to one another case sensitively.
This will restore the index to case insensitive order after the
diff has been generated.
Consider this a short-term fix. The long term fix is to have the
index always stored both case sensitively and case insensitively
(at least on platforms that sometimes require case insensitivity).
|
|
351888cf
|
2013-06-13T15:37:06
|
|
Improve case handling in git_diff__paired_foreach
This commit reinstates some changes to git_diff__paired_foreach
that were discarded during the rebase (because the diff_output.c
file had gone away), and also adjusts the case insensitively
logic slightly to hopefully deal with either mismatched icase
diffs and other case insensitivity scenarios.
|
|
a3e8dbb4
|
2013-06-13T15:32:09
|
|
Be more careful about the path with diffs
This makes diff more careful about picking the canonical path
when generating a delta so that it won't accidentally pick up a
case-mismatched path on a case-insensitive file system. This
should make sure we use the "most accurate" case correct version
of the path (i.e. from the tree if possible, or the index if
need be).
|
|
6de9b2ee
|
2013-06-12T21:10:33
|
|
util: It's called `memzero`
|
|
eb58e2d0
|
2013-06-12T21:05:48
|
|
Merge remote-tracking branch 'arrbee/minor-paranoia' into development
|