kmx git

Commit	Date	Message
db3462ce	2014-01-19T22:36:50	Support union merges
0e1ba46c	2014-01-19T20:03:13	Remove the "merge none" flag The "merge none" (don't automerge) flag was only to aide in merge trivial tests. We can easily determine whether merge trivial resulted in a trivial merge or an automerge by examining the REUC after automerge has completed.
e651e8e2	2014-01-19T15:05:08	Introduce diff3 mode for checking out conflicts
c1d648c5	2014-01-08T18:29:42	merge_file should use more aggressive levels The default merge_file level was XDL_MERGE_MINIMAL, which will produce conflicts where there should not be in the case where both sides were changed identically. Change the defaults to be more aggressive (XDL_MERGE_ZEALOUS) which will more aggressively compress non-conflicts. This matches git.git's defaults. Increase testing around reverting a previously reverted commit to illustrate this problem.
b554ca5d	2014-01-20T15:12:06	"Uninitialized" submodules are "unmodified" Extend the "unmodified" submodule workdir test to include uninitialized submodules, to prevent reporting submodules as modified when they're not in the workdir at all.
3f033c55	2014-01-16T21:53:25	Revert a wrong doc change.
3f0e3e16	2014-01-16T21:42:28	Fix some documentation issues.
0b28217b	2014-01-15T12:51:31	refs: remove the _with_log differentiation Any well-behaved program should write a descriptive message to the reflog whenever it updates a reference. Let's make this more prominent by removing the version without the reflog parameters.
529f342a	2014-01-14T21:33:59	Align git_tree_entry_dup.
29be3a6d	2014-01-14T21:33:35	Align git_signature_dup. This changes git_signature_dup to actually honor oom conditions raised by the call to git__strdup. It also aligns it with the error code return pattern used everywhere else.
40ef47dd	2014-01-14T21:03:01	Add `git_remote_dup`.
6adcaab7	2014-01-08T10:07:30	Handle git_buf's from users more liberally
e7f89b46	2014-01-04T18:18:59	Fix spelling mistake Closes #2029
ac9f9231	2014-01-03T14:40:25	Merge pull request #2022 from KTXSoftware/development submodule branch option + little VS2013 fix
91524172	2014-01-02T14:30:24	Fix warnings with submodule changes
10311979	2014-01-02T03:14:03	Read the submodule branch option from Git 1.8.2.
fccadba2	2013-12-29T10:26:21	Accept 'submodule.*.fetchRecurseSubmodules' config 'on-demand' value
4e1f517c	2013-12-18T09:33:45	Merge pull request #1920 from libgit2/cmn/ref-with-log Reference operations with log
81a2012d	2013-12-12T11:30:50	Overwrite ignored files on checkout
452c7de6	2013-12-12T14:16:40	Add git_treebuilder_insert test and clarify doc This wasn't being tested and since it has a callback, I fixed it even though the return value of this callback is not treated like any of the other callbacks in the API.
9cfce273	2013-12-12T12:11:38	Cleanups, renames, and leak fixes This renames git_vector_free_all to the better git_vector_free_deep and also contains a couple of memory leak fixes based on valgrind checks. The fixes are specifically: failure to free global dir path variables when not compiled with threading on and failure to free filters from the filter registry that had not be initialized fully.
7697e541	2013-12-11T15:02:20	Test cancel from indexer progress callback This adds tests that try canceling an indexer operation from within the progress callback. After writing the tests, I wanted to run this under valgrind and had a number of errors in that situation because mmap wasn't working. I added a CMake option to force emulation of mmap and consolidated the Amiga-specific code into that new place (so we don't actually need separate Amiga code now, just have to turn on -DNO_MMAP). Additionally, I made the indexer code propagate error codes more reliably than it used to.
8f1066a0	2013-12-10T16:02:24	Update clone doc and tests for callback return val Clone callbacks can return non-zero values to cancel the clone. This adds some tests to verify that this actually works and updates the documentation to be clearer that this can happen and that the return value will be propagated back by the clone function.
cbd04896	2013-12-10T14:38:35	Fix checkout notify callback docs and tests The checkout notify callback behavior on non-zero return values was not being tested. This adds tests, fixes a bug with positive values, and clarifies the documentation to make it clear that the checkout can be canceled via this mechanism.
19853bdd	2013-12-10T13:01:34	Update git_blob_create_fromchunks callback behavr The callback to supply data chunks could return a negative value to stop creation of the blob, but we were neither using GIT_EUSER nor propagating the return value. This makes things use the new behavior of returning the negative value back to the user.
373cf6a9	2013-12-09T10:17:47	Update docs for new callback return value behavior
25e0b157	2013-12-06T15:07:57	Remove converting user error to GIT_EUSER This changes the behavior of callbacks so that the callback error code is not converted into GIT_EUSER and instead we propagate the return value through to the caller. Instead of using the giterr_capture and giterr_restore functions, we now rely on all functions to pass back the return value from a callback. To avoid having a return value with no error message, the user can call the public giterr_set_str or some such function to set an error message. There is a new helper 'giterr_set_callback' that functions can invoke after making a callback which ensures that some error message was set in case the callback did not set one. In places where the sign of the callback return value is meaningful (e.g. positive to skip, negative to abort), only the negative values are returned back to the caller, obviously, since the other values allow for continuing the loop. The hardest parts of this were in the checkout code where positive return values were overloaded as meaningful values for checkout. I fixed this by adding an output parameter to many of the internal checkout functions and removing the overload. This added some code, but it is probably a better implementation. There is some funkiness in the network code where user provided callbacks could be returning a positive or a negative value and we want to rely on that to cancel the loop. There are still a couple places where an user error might get turned into GIT_EUSER there, I think, though none exercised by the tests.
96869a4e	2013-12-03T16:45:39	Improve GIT_EUSER handling This adds giterr_user_cancel to return GIT_EUSER and clear any error message that is sitting around. As a result of using that in places, we need to be more thorough with capturing errors that happen inside a callback when used internally. To help with that, this also adds giterr_capture and giterr_restore so that when we internally use a foreach-type function that clears errors and converts them to GIT_EUSER, it is easier to restore not just the return value, but the actual error message text.
9f77b3f6	2013-11-25T14:21:34	Add config read fns with controlled error behavior This adds `git_config__lookup_entry` which will look up a key in a config and return either the entry or NULL if the key was not present. Optionally, it can either suppress all errors or can return them (although not finding the key is not an error for this function). Unlike other accessors, this does not normalize the config key string, so it must only be used when the key is known to be in normalized form (i.e. all lower-case before the first dot and after the last dot, with no invalid characters). This also adds three high-level helper functions to look up config values with no errors and a fallback value. The three functions are for string, bool, and int values, and will resort to the fallback value for any error that arises. They are: * `git_config__get_string_force` * `git_config__get_bool_force` * `git_config__get_int_force` None of them normalize the config `key` either, so they can only be used for internal cases where the key is known to be in normal format.
f2105129	2013-11-23T14:39:53	refs: expose has_log() on the backend The frontend used to look at the file directly, but that's obviously not the right thing to do. Expose it on the backend and use that function instead.
8d5ec910	2013-11-23T14:13:01	refs: expose a way to ensure a ref has a log Sometimes (e.g. stash) we want to make sure that a log will be written, even if it's not in one of the standard locations. Let's make that easier.
a7c83aec	2013-12-06T13:39:08	Clarify docs
710f3838	2013-12-06T09:32:09	Clarify default value and behavior
a6ebc2bd	2013-12-04T15:17:39	Introduce GIT_DIFF_FIND_BY_CONFIG
eac938d9	2013-12-02T14:10:04	Bare naked merge and rebase
d706e843	2013-12-03T23:00:50	Include git2/revert.h in git2.h
db0a7e39	2013-12-03T02:11:55	Merge pull request #1977 from ethomson/revert Revert support for a single commit
bab0b9f2	2013-11-22T18:02:12	clean up state metadata more consistently
300d192f	2013-12-02T11:15:27	Introduce git_revert to revert a single commit
f62c174d	2013-12-02T13:49:58	GIT_DIFF_FIND_REMOVE_UNMODIFIED sounds better
97ad85b8	2013-12-02T13:30:05	Add GIT_DIFF_FIND_DELETE_UNMODIFIED flag When doing copy detection, it is often necessary to include UNMODIFIED records in the git_diff so they are available as source records for GIT_DIFF_FIND_COPIES_FROM_UNMODIFIED. Yet in the final diff, often you will not want to have these UNMODIFIED records. This adds a flag which marks these UNMODIFIED records for deletion from the diff list so they will be removed after the rename detect phase is over.
13c9e44a	2013-11-14T19:41:09	reflog: remove git_reflog_append_to() This was a convenience method for the refs front-end to do the reflog writing. This is now done in the backend and it has no more reason for being.
a57dd3b7	2013-11-13T18:15:20	reflog: integrate into the ref writing Whenever a reference is created or updated, we need to write to the reflog regardless of whether the user gave us a message, so we shouldn't leave that to the ref frontend, but integrate it into the backend. This also eliminates the race between ref update and writing to the reflog, as we protect the reflog with the ref lock. As an additional benefit, this reflog append on the backend happens by appending to the file instead of parsing and rewriting it.
110df893	2013-11-13T13:36:37	refdb: add a `message` parameter for appending to the log This is as yet unused.
ca84e058	2013-05-14T16:40:09	refs: Introduce git_reference_symbolic_set_target_with_log()
14ab0e10	2013-05-14T16:07:33	refs: Introduce git_reference_set_target_with_log()
56ad3782	2013-05-13T17:44:39	refs: Introduce git_reference_symbolic_create_with_log()
bba25f39	2013-05-13T16:21:09	refs: Introduce git_reference_create_with_log()
138e014c	2013-11-20T14:20:32	transport: document ssh-agent authentication
43cb8b32	2013-11-20T12:53:33	libgit2 0.20.0 "anmeldung" Apologies for the delay. This release is chunky, but you're probably used to chunky releases by now. Full changelog follows: Internal changes + Added support for decomposed Unicode paths in Mac OS X + Added support for junctions in win32 + Fixed issues with HTTP redirects in the network stack + Performance improvements (as always) git2/blame.h + added full support for blame operations git2/blob.h + added `git_blob_filtered_content` to load blobs in memory with their corresponding filters applied git2/branch.h + added branch iterators as an alternative to the callback-based API git2/buffer.h + exported the git_buf struct to allow binary buffers to be passed from/to the library. This simplifies several APIs git2/checkout.h + implemented additional checkout options ('skip unmerged', 'use ours' and 'use theirs') git2/clone.h + simplified the clone API + added new `git_clone_into` to clone into an existing (empty) repository git2/commit.h + added APIs to access the raw (uncleaned) text of a commit message git2/common.h + added global options to set the default paths to load templates from git2/config.h + added multivar iterators + added globbing iterator + added `git_config_foreach_match` to perform operations on every single var in a config file git2/diff.h + restructured and simplified the diff API git2/filter.h + added external APIs to configure and apply custom filters to checked out blobs git2/index.h + `git_index_read` can now force a reload of the index file even if it hasn't changed on-disk git2/indexer.h + improved the streaming indexer APIs git2/merge.h + added support for merge! git2/object.h + added helper API to lookup a generic object by path git2/pack.h + added progress callbacks to the packbuilder git2/patch.h + added support for patch generation as part of the Diff API revamp git2/pathspec.h + added helper APIs to work with pathspecs and match files in the workdir or diffs git2/push.h + added progress callbacks to push git2/reflog.h + changed reflog APIs to work on reference names instead of the references themselves, so they become less racy git2/remote.h + added support for setting refspecs on remotes, either at creation or on existing ones + simplified the remotes API git2/revwalk.h + add API to simplify parents during a walk git2/signature.h + add helper to create a signature with the default values for a repository (i.e. the set `user.name` and `user.email` values, and the current time) git2/submodules.h + improve the status detection for submodules git2/sys/ + exported many new internal APIs, such as pluggabe transport APIs -vmg, out
1b3fe73c	2013-11-20T11:52:57	Formatting fix for cred_acquire_cb
d8e7ffc2	2013-11-18T14:03:25	Add content offset to git_diff_line For additions and deletions, external consumers like subversion can make use of the content offset to generate diffs in their proprietary formats.
84efffc3	2013-11-13T16:57:51	Introduce git_cred_default for NTLM/SPNEGO auth
83e1efbf	2013-11-14T14:10:32	Update files that reference tests-clar
7b947bf5	2013-11-14T07:21:47	Merge pull request #1951 from victorgp/create-remote-plus-fetch Allowing create remotes with custom fetch spec
6414fd33	2013-11-11T06:47:15	Merge pull request #1956 from libgit2/cmn/fetch-default-head Remote revamp (director's cut)
359dce72	2013-11-02T00:05:32	remote: make _ls return the list directly The callback-based method of listing remote references dates back to the beginning of the network code's lifetime, when we didn't know any better. We need to keep the list around for update_tips() after disconnect() so let's make use of this to simply give the user a pointer to the array so they can write straightforward code instead of having to go through a callback.
266af6d8	2013-10-30T13:44:22	remote: don't allow such direct access to the refspecs Removing arbitrary refspecs makes things more complex to reason about. Instead, let the user set the fetch and push refspec list to whatever they want it to be.
886cc447	2013-11-08T15:42:52	fixing typo
40b99d05	2013-11-08T12:14:31	splitting funcionality in two methods to avoid ambiguity with NULL
1e60e5f4	2013-11-07T12:03:44	Allow callers to set mode on packfile creation
99feb988	2013-11-07T16:22:49	adding doc for new param and test to check fetch spec is correctly added
cc2447da	2013-11-06T18:41:08	Add git_packbuilder_hash to query pack filename
0fe522d1	2013-11-07T14:16:20	allowing create remote with custom fetch spec
a8baf4b1	2013-11-05T12:26:41	Merge pull request #1946 from arthurschreiber/change-branch-iterator-definition Change the git_branch_iterator_new definition to use git_branch_t
a667ca82	2013-11-05T20:51:07	Change the git_branch_iterator_new and git_branch_next definitions to use git_branch_t.
8adea28a	2013-11-05T11:42:42	Blame: change signature to be more binding-friendly
039db728	2013-07-03T01:00:45	merge branch into current, updating workdir
c82f7f8e	2013-11-05T06:55:16	Merge pull request #1938 from libgit2/cmn/branch-iterator branch: move from foreach to an iterator
ffd04053	2013-11-05T06:05:32	Merge pull request #1941 from libgit2/rb/preserve-iterator-error Preserve error messages during file system iterator cleanup
8ec889a4	2013-11-02T14:07:02	branch: move from foreach to an iterator Create a git_branch_iterator type which is equivalent to the foreach but lets us write loops instead of callbacks. Since the introduction of git_reference_shorthand(), the added value of passing the name is reduced.
1eab9f0e	2013-11-05T14:56:10	error: Simplify giterr_detach
f966acd1	2013-11-04T15:46:32	Take umask into account in filebuf_commit
d6c60169	2013-11-04T15:45:31	Add giterr_detach API to get and clear error There are a number of cases where it is convenient to be able to fetch and "claim" the current error string, clearing the error. This is helpful when you need to call some code that may alter the error and you want to restore it later on and/or report it via some other mechanism.
0e1115d2	2013-11-04T12:16:14	Merge pull request #1939 from ethomson/readwrite_odb Allow backend consumers to specify file mode
dd64c71c	2013-11-04T14:50:25	Allow backend consumers to specify file mode
fb6b0e01	2013-11-04T10:44:59	Merge pull request #1317 from libgit2/blame Blame Canada
44acdd1f	2013-11-04T08:09:58	Merge pull request #1937 from scunz/checkout_assert Don't assert in git_checkout_tree
35221441	2013-11-02T03:43:34	Checkout: Don't assert if treeish is NULL In git_checkout_tree, the first check tests if either repo or treeish is NULL and says that eithor of them has to have a valid value. But there is no code to handle the treeish == NULL case. So, do something meaningful in that case: use HEAD instead.
10749f6c	2013-11-02T03:20:05	Checkout: Unifiy const-ness of `opts` parameter Since all 3 checkout APIs perform the same operation with the options, all of them should use the same const-ness.
2f03050f	2013-10-26T16:21:31	remote: download HEAD when no refspecs are given The correct behaviour when a remote has no refspecs (e.g. a URL from the command-line) is to download the remote's HEAD. Let's do that. This fixes #1261.
a5c16f3c	2013-11-01T10:18:03	Add git_diff_options_init helper Sometimes the static initializer for git_diff_options cannot be used and since setting them to all zeroes doesn't actually work quite right, this adds a new helper for that situation. This also adds an explicit new value to the submodule settings options to be used when those enums need static initialization.
8e5a8ef8	2013-11-01T09:51:01	Convert git_index_read to have a "force" flag This is a little more intuitive than the turned-around option that I originally wrote.
4bf630b6	2013-10-31T14:36:52	Make diff and status perform soft index reload This changes `git_index_read` to have two modes - a hard index reload that always resets the index to match the on-disk data (which was the old behavior) and a soft index reload that uses the timestamp / file size information and only replaces the index data if the file on disk has been modified. This then updates the git_status code to do a soft reload unless the new GIT_STATUS_OPT_NO_REFRESH flag is passed in. This also changes the behavior of the git_diff functions that use the index so that when an index is not explicitly passed in (i.e. when the functions call git_repository_index for you), they will also do a soft reload for you. This intentionally breaks the file signature of git_index_read because there has been some confusion about the behavior previously and it seems like all existing uses of the API should probably be examined to select the desired behavior.
ac5e507c	2013-11-01T09:31:52	Merge pull request #1918 from libgit2/cmn/indexer-naming indexer: remove the stream infix
3793fa9b	2013-10-31T01:08:50	Fix saving remotes with several fetch/push ref specs. At some moment git_config_delete_entry lost the ability to delete one entry of a multivar configuration. The moment you had more than one fetch or push ref spec for a remote you will not be able to save that remote anymore. The changes in network::remote::remotes::save show that problem. I needed to create a new git_config_delete_multivar because I was not able to remove one or several entries of a multivar config with the current API. Several tries modifying how git_config_set_multivar(..., NULL) behaved were not successful. git_config_delete_multivar is very similar to git_config_set_multivar, and delegates into config_delete_multivar of config_file. This function search for the cvar_t that will be deleted, storing them in a temporal array, and rebuilding the linked list. After calling config_write to delete the entries, the cvar_t stored in the temporal array are freed. There is a little fix in config_write, it avoids an infinite loop when using a regular expression (case for the multivars). This error was found by the test network::remote::remotes::tagopt.
97d32abb	2013-10-30T15:09:32	Remove leftover function declaration
a6154f21	2013-10-30T15:00:05	indexer: remove the stream infix It was there to keep it apart from the one which read in from a file on disk. This other indexer does not exist anymore, so there is no need for anything other than git_indexer to refer to it. While here, rename _add() function to _append() and _finalize() to _commit(). The former change is cosmetic, while the latter avoids talking about "finalizing", which OO languages use to mean something completely different.
42c8f8f8	2013-10-28T11:04:58	Merge remote-tracking branch 'libgit2/development' into blame
5c50f22a	2013-10-28T09:25:44	Merge pull request #1891 from libgit2/cmn/fix-thin-packs Add support for thin packs
5565f3cd	2013-10-28T07:04:58	Merge pull request #1904 from libgit2/cmn/ssh-naming Rename the ssh credentials
8f4a8b09	2013-10-28T06:20:28	Merge pull request #1802 from libgit2/cmn/reflog-backend Make reflog part of refdb
5cb13670	2013-10-23T15:45:29	transport: let the progress output return an error There are any number of issues that can come up in the progress callback, and we should let the user cancel at that point as well.
ab46b1d8	2013-10-23T15:08:18	indexer: include the delta stats The user is unable to derive the number of deltas in the pack, as that would require them to capture the stats exactly in the moment between download and final processing, which is abstracted away in the fetch. Capture these numbers for the user and expose them in the progress struct. The clone and fetch examples now also present this information to the user.
70a8c78f	2013-10-23T12:08:54	Rename the ssh credentials The names from libssh2 are somewhat obtuse for us. We can simplify the usual key/passphrase credential's name, as well as make clearer what the custom signature function is.
1c74686e	2013-10-22T11:55:54	Merge pull request #1897 from libgit2/split-patch-from-diff RFC: Proposed reworking of diff APIs
7ce60099	2013-10-22T11:12:44	Fix typo
98fec8a9	2013-10-22T16:05:47	Implement `git_odb_object_dup`
5de4ec81	2013-10-21T15:36:38	Implement patience and minimal diff flags It seems that to implement these options, we just have to pass the appropriate flags through to the libxdiff code taken from core git. So let's do it (and add a test).
3b5f7954	2013-10-21T13:42:42	Create git_diff_line and extend git_diff_hunk Instead of having functions with so very many parameters to pass hunk and line data, this takes the existing git_diff_hunk struct and extends it with more hunk data, plus adds a git_diff_line. Those structs are used to pass back hunk and line data instead of the old APIs that took tons of parameters. Some work that was previously only being done for git_diff_patch creation (scanning the diff content for exact line counts) is now done for all callbacks, but the performance difference should not be noticable.

db3462ce

2014-01-19T22:36:50

Support union merges

0e1ba46c

2014-01-19T20:03:13

Remove the "merge none" flag The "merge none" (don't automerge) flag was only to aide in merge trivial tests. We can easily determine whether merge trivial resulted in a trivial merge or an automerge by examining the REUC after automerge has completed.

e651e8e2

2014-01-19T15:05:08

Introduce diff3 mode for checking out conflicts

c1d648c5

2014-01-08T18:29:42

merge_file should use more aggressive levels The default merge_file level was XDL_MERGE_MINIMAL, which will produce conflicts where there should not be in the case where both sides were changed identically. Change the defaults to be more aggressive (XDL_MERGE_ZEALOUS) which will more aggressively compress non-conflicts. This matches git.git's defaults. Increase testing around reverting a previously reverted commit to illustrate this problem.

b554ca5d

2014-01-20T15:12:06

"Uninitialized" submodules are "unmodified" Extend the "unmodified" submodule workdir test to include uninitialized submodules, to prevent reporting submodules as modified when they're not in the workdir at all.

3f033c55

2014-01-16T21:53:25

Revert a wrong doc change.

3f0e3e16

2014-01-16T21:42:28

Fix some documentation issues.

0b28217b

2014-01-15T12:51:31

refs: remove the _with_log differentiation Any well-behaved program should write a descriptive message to the reflog whenever it updates a reference. Let's make this more prominent by removing the version without the reflog parameters.

529f342a

2014-01-14T21:33:59

Align git_tree_entry_dup.

29be3a6d

2014-01-14T21:33:35

Align git_signature_dup. This changes git_signature_dup to actually honor oom conditions raised by the call to git__strdup. It also aligns it with the error code return pattern used everywhere else.

40ef47dd

2014-01-14T21:03:01

Add `git_remote_dup`.

6adcaab7

2014-01-08T10:07:30

Handle git_buf's from users more liberally

e7f89b46

2014-01-04T18:18:59

Fix spelling mistake Closes #2029

ac9f9231

2014-01-03T14:40:25

Merge pull request #2022 from KTXSoftware/development submodule branch option + little VS2013 fix

91524172

2014-01-02T14:30:24

Fix warnings with submodule changes

10311979

2014-01-02T03:14:03

Read the submodule branch option from Git 1.8.2.

fccadba2

2013-12-29T10:26:21

Accept 'submodule.*.fetchRecurseSubmodules' config 'on-demand' value

4e1f517c

2013-12-18T09:33:45

Merge pull request #1920 from libgit2/cmn/ref-with-log Reference operations with log

81a2012d

2013-12-12T11:30:50

Overwrite ignored files on checkout

452c7de6

2013-12-12T14:16:40

Add git_treebuilder_insert test and clarify doc This wasn't being tested and since it has a callback, I fixed it even though the return value of this callback is not treated like any of the other callbacks in the API.

9cfce273

2013-12-12T12:11:38

Cleanups, renames, and leak fixes This renames git_vector_free_all to the better git_vector_free_deep and also contains a couple of memory leak fixes based on valgrind checks. The fixes are specifically: failure to free global dir path variables when not compiled with threading on and failure to free filters from the filter registry that had not be initialized fully.

7697e541

2013-12-11T15:02:20

Test cancel from indexer progress callback This adds tests that try canceling an indexer operation from within the progress callback. After writing the tests, I wanted to run this under valgrind and had a number of errors in that situation because mmap wasn't working. I added a CMake option to force emulation of mmap and consolidated the Amiga-specific code into that new place (so we don't actually need separate Amiga code now, just have to turn on -DNO_MMAP). Additionally, I made the indexer code propagate error codes more reliably than it used to.

8f1066a0

2013-12-10T16:02:24

Update clone doc and tests for callback return val Clone callbacks can return non-zero values to cancel the clone. This adds some tests to verify that this actually works and updates the documentation to be clearer that this can happen and that the return value will be propagated back by the clone function.

cbd04896

2013-12-10T14:38:35

Fix checkout notify callback docs and tests The checkout notify callback behavior on non-zero return values was not being tested. This adds tests, fixes a bug with positive values, and clarifies the documentation to make it clear that the checkout can be canceled via this mechanism.

19853bdd

2013-12-10T13:01:34

Update git_blob_create_fromchunks callback behavr The callback to supply data chunks could return a negative value to stop creation of the blob, but we were neither using GIT_EUSER nor propagating the return value. This makes things use the new behavior of returning the negative value back to the user.

373cf6a9

2013-12-09T10:17:47

Update docs for new callback return value behavior

25e0b157

2013-12-06T15:07:57

Remove converting user error to GIT_EUSER This changes the behavior of callbacks so that the callback error code is not converted into GIT_EUSER and instead we propagate the return value through to the caller. Instead of using the giterr_capture and giterr_restore functions, we now rely on all functions to pass back the return value from a callback. To avoid having a return value with no error message, the user can call the public giterr_set_str or some such function to set an error message. There is a new helper 'giterr_set_callback' that functions can invoke after making a callback which ensures that some error message was set in case the callback did not set one. In places where the sign of the callback return value is meaningful (e.g. positive to skip, negative to abort), only the negative values are returned back to the caller, obviously, since the other values allow for continuing the loop. The hardest parts of this were in the checkout code where positive return values were overloaded as meaningful values for checkout. I fixed this by adding an output parameter to many of the internal checkout functions and removing the overload. This added some code, but it is probably a better implementation. There is some funkiness in the network code where user provided callbacks could be returning a positive or a negative value and we want to rely on that to cancel the loop. There are still a couple places where an user error might get turned into GIT_EUSER there, I think, though none exercised by the tests.

96869a4e

2013-12-03T16:45:39

Improve GIT_EUSER handling This adds giterr_user_cancel to return GIT_EUSER and clear any error message that is sitting around. As a result of using that in places, we need to be more thorough with capturing errors that happen inside a callback when used internally. To help with that, this also adds giterr_capture and giterr_restore so that when we internally use a foreach-type function that clears errors and converts them to GIT_EUSER, it is easier to restore not just the return value, but the actual error message text.

9f77b3f6

2013-11-25T14:21:34

Add config read fns with controlled error behavior This adds `git_config__lookup_entry` which will look up a key in a config and return either the entry or NULL if the key was not present. Optionally, it can either suppress all errors or can return them (although not finding the key is not an error for this function). Unlike other accessors, this does not normalize the config key string, so it must only be used when the key is known to be in normalized form (i.e. all lower-case before the first dot and after the last dot, with no invalid characters). This also adds three high-level helper functions to look up config values with no errors and a fallback value. The three functions are for string, bool, and int values, and will resort to the fallback value for any error that arises. They are: * `git_config__get_string_force` * `git_config__get_bool_force` * `git_config__get_int_force` None of them normalize the config `key` either, so they can only be used for internal cases where the key is known to be in normal format.

f2105129

2013-11-23T14:39:53

refs: expose has_log() on the backend The frontend used to look at the file directly, but that's obviously not the right thing to do. Expose it on the backend and use that function instead.

8d5ec910

2013-11-23T14:13:01

refs: expose a way to ensure a ref has a log Sometimes (e.g. stash) we want to make sure that a log will be written, even if it's not in one of the standard locations. Let's make that easier.

a7c83aec

2013-12-06T13:39:08

Clarify docs

710f3838

2013-12-06T09:32:09

Clarify default value and behavior

a6ebc2bd

2013-12-04T15:17:39

Introduce GIT_DIFF_FIND_BY_CONFIG

eac938d9

2013-12-02T14:10:04

Bare naked merge and rebase

d706e843

2013-12-03T23:00:50

Include git2/revert.h in git2.h

db0a7e39

2013-12-03T02:11:55

Merge pull request #1977 from ethomson/revert Revert support for a single commit

bab0b9f2

2013-11-22T18:02:12

clean up state metadata more consistently

300d192f

2013-12-02T11:15:27

Introduce git_revert to revert a single commit

f62c174d

2013-12-02T13:49:58

GIT_DIFF_FIND_REMOVE_UNMODIFIED sounds better

97ad85b8

2013-12-02T13:30:05

Add GIT_DIFF_FIND_DELETE_UNMODIFIED flag When doing copy detection, it is often necessary to include UNMODIFIED records in the git_diff so they are available as source records for GIT_DIFF_FIND_COPIES_FROM_UNMODIFIED. Yet in the final diff, often you will not want to have these UNMODIFIED records. This adds a flag which marks these UNMODIFIED records for deletion from the diff list so they will be removed after the rename detect phase is over.

13c9e44a

2013-11-14T19:41:09

reflog: remove git_reflog_append_to() This was a convenience method for the refs front-end to do the reflog writing. This is now done in the backend and it has no more reason for being.

a57dd3b7

2013-11-13T18:15:20

reflog: integrate into the ref writing Whenever a reference is created or updated, we need to write to the reflog regardless of whether the user gave us a message, so we shouldn't leave that to the ref frontend, but integrate it into the backend. This also eliminates the race between ref update and writing to the reflog, as we protect the reflog with the ref lock. As an additional benefit, this reflog append on the backend happens by appending to the file instead of parsing and rewriting it.

110df893

2013-11-13T13:36:37

refdb: add a `message` parameter for appending to the log This is as yet unused.

ca84e058

2013-05-14T16:40:09

refs: Introduce git_reference_symbolic_set_target_with_log()

14ab0e10

2013-05-14T16:07:33

refs: Introduce git_reference_set_target_with_log()

56ad3782

2013-05-13T17:44:39

refs: Introduce git_reference_symbolic_create_with_log()

bba25f39

2013-05-13T16:21:09

refs: Introduce git_reference_create_with_log()

138e014c

2013-11-20T14:20:32

transport: document ssh-agent authentication

43cb8b32

2013-11-20T12:53:33

libgit2 0.20.0 "anmeldung" Apologies for the delay. This release is chunky, but you're probably used to chunky releases by now. Full changelog follows: Internal changes + Added support for decomposed Unicode paths in Mac OS X + Added support for junctions in win32 + Fixed issues with HTTP redirects in the network stack + Performance improvements (as always) git2/blame.h + added full support for blame operations git2/blob.h + added `git_blob_filtered_content` to load blobs in memory with their corresponding filters applied git2/branch.h + added branch iterators as an alternative to the callback-based API git2/buffer.h + exported the git_buf struct to allow binary buffers to be passed from/to the library. This simplifies several APIs git2/checkout.h + implemented additional checkout options ('skip unmerged', 'use ours' and 'use theirs') git2/clone.h + simplified the clone API + added new `git_clone_into` to clone into an existing (empty) repository git2/commit.h + added APIs to access the raw (uncleaned) text of a commit message git2/common.h + added global options to set the default paths to load templates from git2/config.h + added multivar iterators + added globbing iterator + added `git_config_foreach_match` to perform operations on every single var in a config file git2/diff.h + restructured and simplified the diff API git2/filter.h + added external APIs to configure and apply custom filters to checked out blobs git2/index.h + `git_index_read` can now force a reload of the index file even if it hasn't changed on-disk git2/indexer.h + improved the streaming indexer APIs git2/merge.h + added support for merge! git2/object.h + added helper API to lookup a generic object by path git2/pack.h + added progress callbacks to the packbuilder git2/patch.h + added support for patch generation as part of the Diff API revamp git2/pathspec.h + added helper APIs to work with pathspecs and match files in the workdir or diffs git2/push.h + added progress callbacks to push git2/reflog.h + changed reflog APIs to work on reference names instead of the references themselves, so they become less racy git2/remote.h + added support for setting refspecs on remotes, either at creation or on existing ones + simplified the remotes API git2/revwalk.h + add API to simplify parents during a walk git2/signature.h + add helper to create a signature with the default values for a repository (i.e. the set `user.name` and `user.email` values, and the current time) git2/submodules.h + improve the status detection for submodules git2/sys/ + exported many new internal APIs, such as pluggabe transport APIs -vmg, out

1b3fe73c

2013-11-20T11:52:57

Formatting fix for cred_acquire_cb

d8e7ffc2

2013-11-18T14:03:25

Add content offset to git_diff_line For additions and deletions, external consumers like subversion can make use of the content offset to generate diffs in their proprietary formats.

84efffc3

2013-11-13T16:57:51

Introduce git_cred_default for NTLM/SPNEGO auth

83e1efbf

2013-11-14T14:10:32

Update files that reference tests-clar

7b947bf5

2013-11-14T07:21:47

Merge pull request #1951 from victorgp/create-remote-plus-fetch Allowing create remotes with custom fetch spec

6414fd33

2013-11-11T06:47:15

Merge pull request #1956 from libgit2/cmn/fetch-default-head Remote revamp (director's cut)

359dce72

2013-11-02T00:05:32

remote: make _ls return the list directly The callback-based method of listing remote references dates back to the beginning of the network code's lifetime, when we didn't know any better. We need to keep the list around for update_tips() after disconnect() so let's make use of this to simply give the user a pointer to the array so they can write straightforward code instead of having to go through a callback.

266af6d8

2013-10-30T13:44:22

remote: don't allow such direct access to the refspecs Removing arbitrary refspecs makes things more complex to reason about. Instead, let the user set the fetch and push refspec list to whatever they want it to be.

886cc447

2013-11-08T15:42:52

fixing typo

40b99d05

2013-11-08T12:14:31

splitting funcionality in two methods to avoid ambiguity with NULL

1e60e5f4

2013-11-07T12:03:44

Allow callers to set mode on packfile creation

99feb988

2013-11-07T16:22:49

adding doc for new param and test to check fetch spec is correctly added

cc2447da

2013-11-06T18:41:08

Add git_packbuilder_hash to query pack filename

0fe522d1

2013-11-07T14:16:20

allowing create remote with custom fetch spec

a8baf4b1

2013-11-05T12:26:41

Merge pull request #1946 from arthurschreiber/change-branch-iterator-definition Change the git_branch_iterator_new definition to use git_branch_t

a667ca82

2013-11-05T20:51:07

Change the git_branch_iterator_new and git_branch_next definitions to use git_branch_t.

8adea28a

2013-11-05T11:42:42

Blame: change signature to be more binding-friendly

039db728

2013-07-03T01:00:45

merge branch into current, updating workdir

c82f7f8e

2013-11-05T06:55:16

Merge pull request #1938 from libgit2/cmn/branch-iterator branch: move from foreach to an iterator

ffd04053

2013-11-05T06:05:32

Merge pull request #1941 from libgit2/rb/preserve-iterator-error Preserve error messages during file system iterator cleanup

8ec889a4

2013-11-02T14:07:02

branch: move from foreach to an iterator Create a git_branch_iterator type which is equivalent to the foreach but lets us write loops instead of callbacks. Since the introduction of git_reference_shorthand(), the added value of passing the name is reduced.

1eab9f0e

2013-11-05T14:56:10

error: Simplify giterr_detach

f966acd1

2013-11-04T15:46:32

Take umask into account in filebuf_commit

d6c60169

2013-11-04T15:45:31

Add giterr_detach API to get and clear error There are a number of cases where it is convenient to be able to fetch and "claim" the current error string, clearing the error. This is helpful when you need to call some code that may alter the error and you want to restore it later on and/or report it via some other mechanism.

0e1115d2

2013-11-04T12:16:14

Merge pull request #1939 from ethomson/readwrite_odb Allow backend consumers to specify file mode

dd64c71c

2013-11-04T14:50:25

Allow backend consumers to specify file mode

fb6b0e01

2013-11-04T10:44:59

Merge pull request #1317 from libgit2/blame Blame Canada

44acdd1f

2013-11-04T08:09:58

Merge pull request #1937 from scunz/checkout_assert Don't assert in git_checkout_tree

35221441

2013-11-02T03:43:34

Checkout: Don't assert if treeish is NULL In git_checkout_tree, the first check tests if either repo or treeish is NULL and says that eithor of them has to have a valid value. But there is no code to handle the treeish == NULL case. So, do something meaningful in that case: use HEAD instead.

10749f6c

2013-11-02T03:20:05

Checkout: Unifiy const-ness of `opts` parameter Since all 3 checkout APIs perform the same operation with the options, all of them should use the same const-ness.

2f03050f

2013-10-26T16:21:31

remote: download HEAD when no refspecs are given The correct behaviour when a remote has no refspecs (e.g. a URL from the command-line) is to download the remote's HEAD. Let's do that. This fixes #1261.

a5c16f3c

2013-11-01T10:18:03

Add git_diff_options_init helper Sometimes the static initializer for git_diff_options cannot be used and since setting them to all zeroes doesn't actually work quite right, this adds a new helper for that situation. This also adds an explicit new value to the submodule settings options to be used when those enums need static initialization.

8e5a8ef8

2013-11-01T09:51:01

Convert git_index_read to have a "force" flag This is a little more intuitive than the turned-around option that I originally wrote.

4bf630b6

2013-10-31T14:36:52

Make diff and status perform soft index reload This changes `git_index_read` to have two modes - a hard index reload that always resets the index to match the on-disk data (which was the old behavior) and a soft index reload that uses the timestamp / file size information and only replaces the index data if the file on disk has been modified. This then updates the git_status code to do a soft reload unless the new GIT_STATUS_OPT_NO_REFRESH flag is passed in. This also changes the behavior of the git_diff functions that use the index so that when an index is not explicitly passed in (i.e. when the functions call git_repository_index for you), they will also do a soft reload for you. This intentionally breaks the file signature of git_index_read because there has been some confusion about the behavior previously and it seems like all existing uses of the API should probably be examined to select the desired behavior.

ac5e507c

2013-11-01T09:31:52

Merge pull request #1918 from libgit2/cmn/indexer-naming indexer: remove the stream infix

3793fa9b

2013-10-31T01:08:50

Fix saving remotes with several fetch/push ref specs. At some moment git_config_delete_entry lost the ability to delete one entry of a multivar configuration. The moment you had more than one fetch or push ref spec for a remote you will not be able to save that remote anymore. The changes in network::remote::remotes::save show that problem. I needed to create a new git_config_delete_multivar because I was not able to remove one or several entries of a multivar config with the current API. Several tries modifying how git_config_set_multivar(..., NULL) behaved were not successful. git_config_delete_multivar is very similar to git_config_set_multivar, and delegates into config_delete_multivar of config_file. This function search for the cvar_t that will be deleted, storing them in a temporal array, and rebuilding the linked list. After calling config_write to delete the entries, the cvar_t stored in the temporal array are freed. There is a little fix in config_write, it avoids an infinite loop when using a regular expression (case for the multivars). This error was found by the test network::remote::remotes::tagopt.

97d32abb

2013-10-30T15:09:32

Remove leftover function declaration

a6154f21

2013-10-30T15:00:05

indexer: remove the stream infix It was there to keep it apart from the one which read in from a file on disk. This other indexer does not exist anymore, so there is no need for anything other than git_indexer to refer to it. While here, rename _add() function to _append() and _finalize() to _commit(). The former change is cosmetic, while the latter avoids talking about "finalizing", which OO languages use to mean something completely different.

42c8f8f8

2013-10-28T11:04:58

Merge remote-tracking branch 'libgit2/development' into blame

5c50f22a

2013-10-28T09:25:44

Merge pull request #1891 from libgit2/cmn/fix-thin-packs Add support for thin packs

5565f3cd

2013-10-28T07:04:58

Merge pull request #1904 from libgit2/cmn/ssh-naming Rename the ssh credentials

8f4a8b09

2013-10-28T06:20:28

Merge pull request #1802 from libgit2/cmn/reflog-backend Make reflog part of refdb

5cb13670

2013-10-23T15:45:29

transport: let the progress output return an error There are any number of issues that can come up in the progress callback, and we should let the user cancel at that point as well.

ab46b1d8

2013-10-23T15:08:18

indexer: include the delta stats The user is unable to derive the number of deltas in the pack, as that would require them to capture the stats exactly in the moment between download and final processing, which is abstracted away in the fetch. Capture these numbers for the user and expose them in the progress struct. The clone and fetch examples now also present this information to the user.

70a8c78f

2013-10-23T12:08:54

Rename the ssh credentials The names from libssh2 are somewhat obtuse for us. We can simplify the usual key/passphrase credential's name, as well as make clearer what the custom signature function is.

1c74686e

2013-10-22T11:55:54

Merge pull request #1897 from libgit2/split-patch-from-diff RFC: Proposed reworking of diff APIs

7ce60099

2013-10-22T11:12:44

Fix typo

98fec8a9

2013-10-22T16:05:47

Implement `git_odb_object_dup`

5de4ec81

2013-10-21T15:36:38

Implement patience and minimal diff flags It seems that to implement these options, we just have to pass the appropriate flags through to the libxdiff code taken from core git. So let's do it (and add a test).

3b5f7954

2013-10-21T13:42:42

Create git_diff_line and extend git_diff_hunk Instead of having functions with so very many parameters to pass hunk and line data, this takes the existing git_diff_hunk struct and extends it with more hunk data, plus adds a git_diff_line. Those structs are used to pass back hunk and line data instead of the old APIs that took tons of parameters. Some work that was previously only being done for git_diff_patch creation (scanning the diff content for exact line counts) is now done for all callbacks, but the performance difference should not be noticable.

thodg/libgit2/include

include

Log