kmx git

Commit	Date	Message
9cfce273	2013-12-12T12:11:38	Cleanups, renames, and leak fixes This renames git_vector_free_all to the better git_vector_free_deep and also contains a couple of memory leak fixes based on valgrind checks. The fixes are specifically: failure to free global dir path variables when not compiled with threading on and failure to free filters from the filter registry that had not be initialized fully.
26c1cb91	2013-12-09T09:44:03	One more rename/cleanup for callback err functions
c7b3e1b3	2013-12-06T15:42:20	Some callback error check style cleanups I find this easier to read...
96869a4e	2013-12-03T16:45:39	Improve GIT_EUSER handling This adds giterr_user_cancel to return GIT_EUSER and clear any error message that is sitting around. As a result of using that in places, we need to be more thorough with capturing errors that happen inside a callback when used internally. To help with that, this also adds giterr_capture and giterr_restore so that when we internally use a foreach-type function that clears errors and converts them to GIT_EUSER, it is easier to restore not just the return value, but the actual error message text.
9f77b3f6	2013-11-25T14:21:34	Add config read fns with controlled error behavior This adds `git_config__lookup_entry` which will look up a key in a config and return either the entry or NULL if the key was not present. Optionally, it can either suppress all errors or can return them (although not finding the key is not an error for this function). Unlike other accessors, this does not normalize the config key string, so it must only be used when the key is known to be in normalized form (i.e. all lower-case before the first dot and after the last dot, with no invalid characters). This also adds three high-level helper functions to look up config values with no errors and a fallback value. The three functions are for string, bool, and int values, and will resort to the fallback value for any error that arises. They are: * `git_config__get_string_force` * `git_config__get_bool_force` * `git_config__get_int_force` None of them normalize the config `key` either, so they can only be used for internal cases where the key is known to be in normal format.
25e0b157	2013-12-06T15:07:57	Remove converting user error to GIT_EUSER This changes the behavior of callbacks so that the callback error code is not converted into GIT_EUSER and instead we propagate the return value through to the caller. Instead of using the giterr_capture and giterr_restore functions, we now rely on all functions to pass back the return value from a callback. To avoid having a return value with no error message, the user can call the public giterr_set_str or some such function to set an error message. There is a new helper 'giterr_set_callback' that functions can invoke after making a callback which ensures that some error message was set in case the callback did not set one. In places where the sign of the callback return value is meaningful (e.g. positive to skip, negative to abort), only the negative values are returned back to the caller, obviously, since the other values allow for continuing the loop. The hardest parts of this were in the checkout code where positive return values were overloaded as meaningful values for checkout. I fixed this by adding an output parameter to many of the internal checkout functions and removing the overload. This added some code, but it is probably a better implementation. There is some funkiness in the network code where user provided callbacks could be returning a positive or a negative value and we want to rely on that to cancel the loop. There are still a couple places where an user error might get turned into GIT_EUSER there, I think, though none exercised by the tests.
fcd324c6	2013-12-06T15:04:31	Add git_vector_free_all There are a lot of places that we call git__free on each item in a vector and then call git_vector_free on the vector itself. This just wraps that up into one convenient helper function.
3e57069e	2013-11-01T13:49:43	Fix --assume-unchanged support This was never really working right because we were checking the wrong flag and not checking it in all the places that we need to be checking it. I finally got around to writing a test and adding actual support for it.
a5c16f3c	2013-11-01T10:18:03	Add git_diff_options_init helper Sometimes the static initializer for git_diff_options cannot be used and since setting them to all zeroes doesn't actually work quite right, this adds a new helper for that situation. This also adds an explicit new value to the submodule settings options to be used when those enums need static initialization.
8e5a8ef8	2013-11-01T09:51:01	Convert git_index_read to have a "force" flag This is a little more intuitive than the turned-around option that I originally wrote.
4bf630b6	2013-10-31T14:36:52	Make diff and status perform soft index reload This changes `git_index_read` to have two modes - a hard index reload that always resets the index to match the on-disk data (which was the old behavior) and a soft index reload that uses the timestamp / file size information and only replaces the index data if the file on disk has been modified. This then updates the git_status code to do a soft reload unless the new GIT_STATUS_OPT_NO_REFRESH flag is passed in. This also changes the behavior of the git_diff functions that use the index so that when an index is not explicitly passed in (i.e. when the functions call git_repository_index for you), they will also do a soft reload for you. This intentionally breaks the file signature of git_index_read because there has been some confusion about the behavior previously and it seems like all existing uses of the API should probably be examined to select the desired behavior.
3940310e	2013-10-30T13:56:42	Fix some of the glaring errors in GIT_DIFF_REVERSE These changes fix the basic problem with GIT_DIFF_REVERSE being broken for text diffs. The reversed diff entries were getting added to the git_diff correctly, but some of the metadata was kept incorrectly in a way that prevented the text diffs from being generated correctly. Once I fixed that, it became clear that it was not possible to merge reversed diffs correctly. This has a first pass at fixing that problem. We probably need more tests to make sure that is really fixed thoroughly.
74a627f0	2013-10-21T09:07:19	Tweak to git_diff_delta structure for nfiles While the base git_diff_delta structure always contains two files, when we introduce conflict data, it will be helpful to have an indicator when an additional file is involved.
10672e3e	2013-10-15T15:10:07	Diff API cleanup This lays groundwork for separating formatting options from diff creation options. This groups the formatting flags separately from the diff list creation flags and reorders the options. This also tweaks some APIs to further separate code that uses patches from code that just looks at git_diffs.
3ff1d123	2013-10-11T14:51:54	Rename diff objects and split patch.h This makes no functional change to diff but renames a couple of the objects and splits the new git_patch (formerly git_diff_patch) into a new header file.
92d19d16	2013-09-21T09:34:03	Merge pull request #1840 from linquize/warning Fix warning
66566516	2013-09-08T17:15:42	Fix warning
4b11f25a	2013-09-11T16:38:33	Add ident filter This adds the ident filter (that knows how to replace $Id$) and tweaks the filter APIs and code so that git_filter_source objects actually have the updated OID of the object being filtered when it is a known value.
85d54812	2013-08-28T16:44:04	Create public filter object and use it This creates include/sys/filter.h with a basic definition of a git_filter and then converts the internal code to use it. There are related internal objects (git_filter_list) that we will want to publish at some point, but this is a first step.
e38f0d69	2013-08-05T14:06:41	Add rename from rewrites to status In git_diff_paired_foreach, temporarily resort the index->workdir diff list by index path so that we can track a rename in the workdir from head->index->workdir.
125655fe	2013-07-02T16:49:57	Untracked directories with .git should be ignored This restores a behavior that was accidentally lost during some diff refactoring where an untracked directory that contains a .git item should be treated as IGNORED, not as UNTRACKED. The submodule code already detects this, but the diff code was not handling the scenario right. This also updates a number of existing tests that were actually exercising the behavior but did not have the right expectations in place. It actually makes the new `test_diff_submodules__diff_ignore_options` test feel much better because the "not-a-submodule" entries are now ignored instead of showing up as untracked items. Fixes #1697
f9775a37	2013-06-29T23:22:31	Add ignore_submodules to diff options This adds correct support for an equivalent to --ignore-submodules in diff, where an actual ignore value can be passed to diff to override the per submodule settings in the configuration. This required tweaking the constants for ignore values so that zero would not be used and could represent an unset option to the diff. This was an opportunity to move the submodule values into include/git2/types.h and to rename the poorly named DEFAULT values for ignore and update constants to RESET instead. Now the GIT_DIFF_IGNORE_SUBMODULES flag is exactly the same as setting the ignore_submodules option to GIT_SUBMODULE_IGNORE_ALL (which is actually a minor change from the old behavior in that submodules will now be treated as UNMODIFIED deltas instead of being left out totally - if you set GIT_DIFF_INCLUDE_UNMODIFIED). This includes tests for the various new settings.
2e3e273e	2013-06-29T13:20:45	Update diff to new internal submodule status API Submodules now expose an internal status API that allows diff to get back the OID values from the submodule very easily and also to avoiding caching issues and to override the ignore setting for the submodule.
2b672d5b	2013-07-08T22:46:36	Add git_pathspec_match_diff API This adds an additional pathspec API that will match a pathspec against a diff object. This is convenient if you want to handle renames (so you need the whole diff and can't use the pathspec constraint built into the diff API) but still want to tell if the diff had any files that matched the pathspec. When the pathspec is matched against a diff, instead of keeping a list of filenames that matched, instead the API keeps the list of git_diff_deltas that matched and they can be retrieved via a new API git_pathspec_match_list_diff_entry. There are a couple of other minor API extensions here that were mostly for the sake of convenience and to reduce dependencies on knowing the internal data structure between files inside the library.
d2ce27dd	2013-06-24T23:16:06	Add public API for pathspec matching This adds a new public API for compiling pathspecs and matching them against the working directory, the index, or a tree from the repository. This also reworks the pathspec internals to allow the sharing of code between the existing internal usage of pathspec matching and the new external API. While this is working and the new API is ready for discussion, I think there is still an incorrect behavior in which patterns are always matched against the full path of an entry without taking the subdirectories into account (so "s*" will match "subdir/file" even though it wouldn't with core Git). Further enhancements are coming, but this was a good place to take a functional snapshot.
2a16914c	2013-07-03T12:20:34	Remove GIT_STATUS_SHOW_INDEX_THEN_WORKDIR option This option serves no benefit now that the git_status_list API is available. It was of questionable value before and now it would just be a bad idea to use it rather than the indexed API.
9b6075b2	2013-07-03T17:07:20	Fix segfault in git_status_foreach_ext() Add tests for the `GIT_STATUS_SHOW_XXX` flags.
22b6b82f	2013-06-20T12:16:06	Add status flags to force output sort order Files in status will, be default, be sorted according to the case insensitivity of the filesystem that we're running on. However, in some cases, this is not desirable. Even on case insensitive file systems, 'git status' at the command line will generally use a case sensitive sort (like 'ls'). Some GUIs prefer to display a list of file case insensitively even on case-sensitive platforms. This adds two new flags: GIT_STATUS_OPT_SORT_CASE_SENSITIVELY and GIT_STATUS_OPT_SORT_CASE_INSENSITIVELY that will override the default sort order of the status output and give the user control. This includes tests for exercising these new options and makes the examples/status.c program emulate core Git and always use a case sensitive sort.
852ded96	2013-06-20T11:37:58	Fix bug in diff untracked dir scan When scanning untracked directories looking for non-ignored files there was a bug where an empty directory would generate a false error.
f30fff45	2013-06-19T15:27:25	Add index pathspec-based operations This adds three new public APIs for manipulating the index: 1. `git_index_add_all` is similar to `git add -A` and will add files in the working directory that match a pathspec to the index while honoring ignores, etc. 2. `git_index_remove_all` removes files from the index that match a pathspec. 3. `git_index_update_all` updates entries in the index based on the current contents of the working directory, either added the new information or removing the entry from the index.
eefef642	2013-06-13T16:09:53	Always do tree to index diffs case sensitively Trees are always case sensitive. The index is always case preserving and will be case sensitive when it is turned into a tree. Therefore the tree and the index can and should always be compared to one another case sensitively. This will restore the index to case insensitive order after the diff has been generated. Consider this a short-term fix. The long term fix is to have the index always stored both case sensitively and case insensitively (at least on platforms that sometimes require case insensitivity).
351888cf	2013-06-13T15:37:06	Improve case handling in git_diff__paired_foreach This commit reinstates some changes to git_diff__paired_foreach that were discarded during the rebase (because the diff_output.c file had gone away), and also adjusts the case insensitively logic slightly to hopefully deal with either mismatched icase diffs and other case insensitivity scenarios.
a3e8dbb4	2013-06-13T15:32:09	Be more careful about the path with diffs This makes diff more careful about picking the canonical path when generating a delta so that it won't accidentally pick up a case-mismatched path on a case-insensitive file system. This should make sure we use the "most accurate" case correct version of the path (i.e. from the tree if possible, or the index if need be).
6de9b2ee	2013-06-12T21:10:33	util: It's called `memzero`
eb58e2d0	2013-06-12T21:05:48	Merge remote-tracking branch 'arrbee/minor-paranoia' into development
114f5a6c	2013-06-10T10:10:39	Reorganize diff and add basic diff driver This is a significant reorganization of the diff code to break it into a set of more clearly distinct files and to document the new organization. Hopefully this will make the diff code easier to understand and to extend. This adds a new `git_diff_driver` object that looks of diff driver information from the attributes and the config so that things like function content in diff headers can be provided. The full driver spec is not implemented in the commit - this is focused on the reorganization of the code and putting the driver hooks in place. This also removes a few #includes from src/repository.h that were overbroad, but as a result required extra #includes in a variety of places since including src/repository.h no longer results in pulling in the whole world.
3e9e6cda	2013-06-07T09:54:33	Add safe memset and use it This adds a `git__memset` routine that will not be optimized away and updates the places where I memset() right before a free() call to use it.
f658dc43	2013-05-31T14:09:58	Zero memory for major objects before freeing By zeroing out the memory when we free larger objects (i.e. those that serve as collections of other data, such as repos, odb, refdb), I'm hoping that it will be easier for libgit2 bindings to find errors in their object management code.
cee695ae	2013-05-31T12:18:43	Make iterators use GIT_ITEROVER & smart advance 1. internal iterators now return GIT_ITEROVER when you go past the last item in the iteration. 2. git_iterator_advance will "advance" to the first item in the iteration if it is called immediately after creating the iterator, which allows a simpler idiom for basic iteration. 3. if git_iterator_advance encounters an error reading data (e.g. a missing tree or an unreadable file), it returns the error but also attempts to advance past the invalid data to prevent an infinite loop. Updated all tests and internal usage of iterators to account for these new behaviors.
d20b0449	2013-05-24T10:37:40	Clarify GIT_DIFF_INCLUDE_UNTRACKED_CONTENT option This improves the docs for GIT_DIFF_INCLUDE_UNTRACKED_CONTENT as well as the other flags related to UNTRACKED items in diff, plus it makes that flag now automatically turn on GIT_DIFF_INCLUDE_UNTRACKED which seems like a reasonable dwim type of change.
0293450e	2013-05-17T16:57:49	Fix delta compare to use correct pathname The delta cmp function needs to choose the correct path for ordering when a delta is ADDED, RENAMED, or COPIED.
79ef3be4	2013-05-15T14:50:05	Fix diff crash when last item is untracked dir When the last item in a diff was an untracked directory that only contained ignored items, the loop to scan the contents would run off the end of the iterator and dereference a NULL pointer. This includes a test that reproduces the problem and a fix.
eb05b114	2013-05-07T22:45:01	Fix dumb type in time comparison
e35e2684	2013-05-07T04:32:17	Add GIT_DIFF_LINE_CONTEXT_EOFNL This adds a new line origin constant for the special line that is used when both files end without a newline. In the course of writing the tests for this, I was having problems with modifying a file but not having diff notice because it was the same size and modified less than one second from the start of the test, so I decided to start working on nanosecond timestamp support. This commit doesn't contain the nanosecond support, but it contains the reorganization of maybe_modified and the hooks so that if the nanosecond data were being read by stat() (or rather being copied by git_index_entry__init_from_stat), then the nsec would be taken into account. This new stuff could probably use some more tests, although there is some amount of it here.
d8041638	2013-05-02T17:22:13	fix some leaks
5fa7e469	2013-04-30T04:13:39	Fix some formatting inconsistency
e26b14c0	2013-04-26T15:35:47	Update diff handling of untracked directories When diff encounters an untracked directory, there was a shortcut that it took which is not compatible with core git. This makes the default behavior no longer take that shortcut and instead look inside the untracked directory to see if there are any untracked files within it. If there are not, then the directory is treated as an ignore directory instead of an untracked directory. This has implications for the git_status APIs.
fdb3034e	2013-04-25T14:57:13	Reorganize diff code into functions In preparation for more changes to the internal diff logic, it seemed wise to split the very large git_diff__from_iterators into separate functions that handle the four main cases (unmatched old item, unmatched new item, unmatched new directory, and matched old and new items). Hopefully this will keep the logic easier to follow even as more cases have to be added to this code.
b7f167da	2013-04-29T13:52:12	Make git_oid_cmp public and add git_oid__cmp
687db88f	2013-04-22T16:45:36	Make sure diff output is cleared on error
b1ff7004	2013-04-22T16:25:57	Improve diff config options handling This makes diff use the cvar cache for config options where possible, and also adds support for a number of other config options to diff including "diff.context", "diff.ignoreSubmodules", "diff.noprefix", "diff.mnemonicprefix", and "core.abbrev". To make this natural, this involved a rearrangement of the code that allocates the diff object vs. the code that initializes it based on the combination of options passed in by the user and read from the config. This commit includes tests for most of these new options as well.
608d0466	2013-04-22T13:51:35	Make tree to tree diffs case sensitive When case insensitive tree iterators were added, we started reading the case sensitivity of the index to decide if the tree should be case sensitive. This is good for index-to-tree comparisons, but for tree-to-tree comparisons, we should really default to doing a case sensitive comparison unless the user really wants otherwise.
a5df71c1	2013-04-19T22:36:01	Support diff.context config
ad26434b	2013-04-09T14:52:32	Tests and more fixes for submodule diffs This adds tests for diffs with submodules in them and (perhaps unsurprisingly) requires further fixes to be made. Specifically, this fixes: - when considering if a submodule is dirty in the workdir, it was being treated as dirty even if only the index was dirty. - git_diff_patch_to_str (and git_diff_patch_print) were "printing" the headers for files (and submodules) that were unmodified or had no meaningful content. - added comment to previous fix and removed unneeded parens.
ccfa6805	2013-03-25T23:58:40	Fix some diff ignores and submodule dirty workdir This started out trying to look at the problems from issue #1425 and gradually grew to a broader set of fixes. There are two core things fixed here: 1. When you had an ignore like "/bin" which is rooted at the top of your tree, instead of immediately adding the "bin/" entry as an ignored item in the diff, we were returning all of the direct descendants of the directory as ignored items. This changes things to immediately ignore the directory. Note that this effects the behavior in test_status_ignore__subdirectories so that we no longer exactly match core gits ignore behavior, but the new behavior probably makes more sense (i.e. we now will include an ignored directory inside an untracked directory that we previously would have left off). 2. When a submodule only contained working directory changes, the diff code was always considering it unmodified which was just an outright bug. The HEAD SHA of the submodule matches the SHA in the parent repo index, and since the SHAs matches, the diff code was overwriting the actual status with UNMODIFIED. These fixes broke existing tests test_diff_workdir__submodules and test_status_ignore__subdirectories but looking it over, I actually think the new results are correct and the old results were wrong. @nulltoken had actually commented on the subdirectory ignore issue previously. I also included in the tests some debugging versions of the shared iteration callback routines that print status or diff information. These aren't used actively in the tests, but can be quickly swapped in to test code to give a better picture of what is being scanned in some of the complex test scenarios.
37ee70fa	2013-03-25T22:19:39	Implement GIT_STATUS_OPT_EXCLUDE_SUBMODULES This option has been sitting unimplemented for a while, so I finally went through and implemented it along with some tests. As part of this, I improved the implementation of GIT_DIFF_IGNORE_SUBMODULES so it be more diligent about avoiding extra work and about leaving off delta records for submodules to the greatest extent possible (though it may include them still if you are request TYPECHANGE records).
0c289dd7	2013-03-25T16:40:16	Recursing into ignored dirs for diff and status This implements working versions of GIT_DIFF_RECURSE_IGNORED_DIRS and GIT_STATUS_OPT_RECURSE_IGNORED_DIRS along with some tests for the newly available behaviors. This is not turned on by default for status, but can be accessed via the options to the extended version of the command.
65025cb8	2013-03-18T17:24:13	Three submodule status bug fixes 1. Fix sort order problem with submodules where "mod" was sorting after "mod-plus" because they were being sorted as "mod/" and "mod-plus/". This involved pushing the "contains a .git entry" test significantly lower in the stack. 2. Reinstate behavior that a directory which contains a .git entry will be treated as a submodule during iteration even if it is not yet added to the .gitmodules. 3. Now that any directory containing .git is reported as submodule, we have to be more careful checking for GIT_EEXISTS when we do a submodule lookup, because that is the error code that is returned by git_submodule_lookup when you try to look up a directory containing .git that has no record in gitmodules or the index.
1ac10aae	2013-03-12T09:23:53	Merge pull request #1408 from arrbee/refactor-iterators Refactor iterators
1aa5318a	2013-03-09T16:04:34	diff: allow asking for diffs with no context Previously, 0 meant default. This is problematic, as asking for 0 context lines is a valid thing to do. Change GIT_DIFF_OPTIONS_INIT to default to three and stop treating 0 as a magic value. In case no options are provided, make sure the options in the diff object default to 3.
9bea03ce	2013-03-06T15:16:34	Add INCLUDE_TREES, DONT_AUTOEXPAND iterator flags This standardizes iterator behavior across all three iterators (index, tree, and working directory). Previously the working directory iterator behaved differently from the other two. Each iterator can now operate in one of three modes: 1. No tree results, auto expand trees means that only non- tree items will be returned and when a tree/directory is encountered, we will automatically descend into it. 2. Tree results, auto expand trees means that results will be given for every item found, including trees, but you only need to call normal git_iterator_advance to yield every item (i.e. trees returned with pre-order iteration). 3. Tree results, no auto expand means that calling the normal git_iterator_advance when looking at a tree will not descend into the tree, but will skip over it to the next entry in the parent. Previously, behavior 1 was the only option for index and tree iterators, and behavior 3 was the only option for workdir. The main public API implications of this are that the `git_iterator_advance_into()` call is now valid for all iterators, not just working directory iterators, and all the existing uses of working directory iterators explicitly use the GIT_ITERATOR_DONT_AUTOEXPAND (for now). Interestingly, the majority of the implementation was in the index iterator, since there are no tree entries there and now have to fake them. The tree and working directory iterators only required small modifications.
cc216a01	2013-03-05T16:29:04	Retire spoolandsort iterator Since the case sensitivity is moved into the respective iterators, this removes the spoolandsort iterator code.
169dc616	2013-03-05T16:10:05	Make iterator APIs consistent with standards The iterator APIs are not currently consistent with the parameter ordering of the rest of the codebase. This rearranges the order of parameters, simplifies the naming of a number of functions, and makes somewhat better use of macros internally to clean up the iterator code. This also expands the test coverage of iterator functionality, making sure that case sensitive range-limited iteration works correctly.
71a3d27e	2013-02-08T10:06:47	Replace diff delta binary with flags Previously the git_diff_delta recorded if the delta was binary. This replaces that (with no net change in structure size) with a full set of flags. The flag values that were already in use for individual git_diff_file objects are reused for the delta flags, too (along with renaming those flags to make it clear that they are used more generally). This (a) makes things somewhat more consistent (because I was using a -1 value in the "boolean" binary field to indicate unset, whereas now I can just use the flags that are easier to understand), and (b) will make it easier for me to add some additional flags to the delta object in the future, such as marking the results of a copy/rename detection or other deltas that might want a special indicator. While making this change, I officially moved some of the flags that were internal only into the private diff header. This also allowed me to remove a gross hack in rename/copy detect code where I was overwriting the status field with an internal value.
0d64ba48	2013-01-25T17:35:46	diff: add a notify callback to `git_diff__from_iterators` The callback will be called for each file, just before the `git_delta_t` gets inserted into the diff list. When the callback: - returns < 0, the diff process will be aborted - returns > 0, the delta will not be inserted into the diff list, but the diff process continues - returns 0, the delta is inserted into the diff list, and the diff process continues
943700ec	2013-01-18T16:37:13	Return the matched pathspec pattern in `git_pathspec_match_path` Instead of returning directly the pattern as the return value, I used an out parameter, because the function also tests if the passed pathspecs vector is empty. If yes, it considers that the path "matches", but in that case there is no matched pattern per se.
134d8c91	2013-01-08T15:53:13	Update iterator API with flags for ignore_case This changes the iterator API so that flags can be passed in to the constructor functions to control the ignore_case behavior. At this point, the flags are not supported on tree iterators (i.e. there is no functional change over the old API), but the API changes are all made to accomodate this. By the way, I went with a flags parameter because in the future I have a couple of other ideas for iterator flags that will make it easier to fix some diff/status/checkout bugs.
359fc2d2	2013-01-08T17:07:25	update copyrights
546d65a8	2013-01-02T17:01:34	Fix up spoolandsort iterator usage The spoolandsort iterator changes got sort-of cherry picked out of this branch and so I dropped the commit when rebasing; however, there were a few small changes that got dropped as well (since the version merged upstream wasn't quite the same as what I dropped).
7e5c8a5b	2012-12-10T15:31:43	More checkout improvements This flips checkout back to be driven off the changes between the baseline and the target trees. This reinstates the complex code for tracking the contents of the working directory, but overall, I think the resulting logic is easier to follow.
f616a36b	2012-12-27T22:25:52	Make spoolandsort a pushable iterator behavior An earlier change to `git_diff_from_iterators` introduced a memory leak where the allocated spoolandsort iterator was not returned to the caller and thus not freed. One proposal changes all iterator APIs to use git_iterator** so we can reallocate the iterator at will, but that seems unexpected. This commit makes it so that an iterator can be changed in place. The callbacks are isolated in a separate structure and a pointer to that structure can be reassigned by the spoolandsort extension. This means that spoolandsort doesn't create a new iterator; it just allocates a new block of callbacks (along with space for its own extra data) and swaps that into the iterator. Additionally, since spoolandsort is only needed to switch the case sensitivity of an iterator, this simplifies the API to only take the ignore_case boolean and to be a no-op if the iterator already matches the requested case sensitivity.
56c72b75	2012-12-17T11:00:53	Fix diff constructor name order confusion The diff constructor functions had some confusing names, where the "old" side of the diff was coming after the "new" side. This reverses the order in the function name to make it less confusing. Specifically... * git_diff_index_to_tree becomes git_diff_tree_to_index * git_diff_workdir_to_index becomes git_diff_index_to_workdir * git_diff_workdir_to_tree becomes git_diff_tree_to_workdir
9950d27a	2012-12-06T13:26:58	Clean up iterator APIs This removes the need to explicitly pass the repo into iterators where the repo is implied by the other parameters. This moves the repo to be owned by the parent struct. Also, this has some iterator related updates to the internal diff API to lay the groundwork for checkout improvements.
32770c52	2012-12-05T13:56:32	Fix diff header comments and missing const Based on the recent work to wrap diff in objective-git, this includes a fix for a missing const and a number of clarifications of the documentation.
c7231c45	2012-11-30T16:31:42	Deploy GITERR_CHECK_VERSION
2f8d30be	2012-11-29T15:05:04	Deploy GIT_DIFF_OPTIONS_INIT
9cd42358	2012-11-20T16:57:16	API updates for submodule.h
0cd063fd	2012-11-15T23:28:52	Merge pull request #1071 from arrbee/alternate-fix-strcmp Win32 fixes for diff/checkout/reset
4a0c7f56	2012-11-15T10:31:11	Merge pull request #1074 from edubart/ignore_diff_filemode Add option to ignore file mode in diffs
c0d5acf6	2012-11-15T14:43:21	Add option to ignore file mode in diffs
bbe6dbec	2012-11-14T23:29:48	Add explicit git_index ptr to diff and checkout A number of diff APIs and the `git_checkout_index` API take a `git_repository` object an operate on the index. This updates them to take a `git_index` pointer explicitly and only fall back on the `git_repository` index if the index input is NULL. This makes it easier to operate on a temporary index.
bad68c0a	2012-11-13T14:02:59	Add iterator for git_index object The index iterator could previously only be created from a repo object, but this allows creating an iterator from a `git_index` object instead (while keeping, though renaming, the old function).
5735bf5e	2012-11-13T13:58:29	Fix diff API to better parameter order The diff API is not in the parameter order one would expect from other libgit2 APIs. This fixes that.
a277345e	2012-11-14T22:37:13	Create internal strcmp variants for function ptrs Using the builtin strcmp and strcasecmp as function pointers is problematic on win32. This adds internal implementations and divorces us from the platform linkage.
0f3def71	2012-11-09T11:19:46	Fix various cross-platform build issues This fixes a number of warnings and problems with cross-platform builds. Among other things, it's not safe to name a member of a structure "strcmp" because that may be #defined.
a1bf70e4	2012-11-08T21:58:24	fix regression in diff with submodule oid
55cbd05b	2012-11-08T16:56:34	Some diff refactorings to help code reuse There are some diff functions that are useful in a rewritten checkout and this lays some groundwork for that. This contains three main things: 1. Share the function diff uses to calculate the OID for a file in the working directory (now named `git_diff__oid_for_file` 2. Add a `git_diff__paired_foreach` function to iterator over two diff lists concurrently. Convert status to use it. 3. Move all the string/prefix/index entry comparisons into function pointers inside the `git_diff_list` object so they can be switched between case sensitive and insensitive versions. This makes them easier to reuse in various functions without replicating logic. As part of this, move a couple of index functions out of diff.c and into index.c.
2e3d4b96	2012-11-08T16:47:28	Move pathspec code in separate files Diff uses a `git_strarray` of path specs to represent a subset of all files to be processed. It is useful to be able to reuse this filtering in other places outside diff, so I've moved it into a standalone set of utilities.
db106d01	2012-10-30T09:40:50	Move rename detection into new file This improves the naming for the rename related functionality moving it to be called `git_diff_find_similar()` and renaming all the associated constants, etc. to make more sense. I also moved the new code (plus the existing `git_diff_merge`) into a new file `diff_tform.c` where I can put new functions related to manipulating git diff lists. This also updates the implementation significantly from the last revision fixing some ordering issues (where break-rewrite needs to be handled prior to copy and rename detection) and improving config option handling.
b4f5bb07	2012-10-23T16:40:51	Initial implementation of diff rename detection This implements the basis for diff rename and copy detection, although it is based on simple SHA comparison right now instead of using a matching algortihm. Just as `git_diff_merge` can be used as a post-pass on diffs to emulate certain command line behaviors, there is a new API `git_diff_detect` which will update a diff list in-place, adjusting some deltas to RENAMED or COPIED state (and also, eventually, splitting MODIFIED deltas where the change is too large into DELETED/ADDED pairs). This also adds a new test repo that will hold rename/copy/split scenarios. Right now, it just has exact-match rename and copy, but the tests are written to use tree diffs, so we should be able to add new test scenarios easily without breaking tests.
c2e43fb1	2012-10-18T16:50:55	diff: workdir diffing in a bare repo returns EBAREREPO
0d64bef9	2012-10-05T15:56:57	Add complex checkout test and then fix checkout This started as a complex new test for checkout going through the "typechanges" test repository, but that revealed numerous issues with checkout, including: * complete failure with submodules * failure to create blobs with exec bits * problems when replacing a tree with a blob because the tree "example/" sorts after the blob "example" so the delete was being processed after the single file blob was created This fixes most of those problems and includes a number of other minor changes that made it easier to do that, including improving the TYPECHANGE support in diff/status, etc.
bc16fd3e	2012-09-28T13:40:02	Introduce status/diff TYPECHANGE flags When I wrote the diff code, I based it on core git's diff output which tends to split a type change into an add and a delete. But core git's status has the notion of a T (typechange) flag for a file. This introduces that into our status APIs and modifies the diff code so it can be forced to not split type changes.
5d1308f2	2012-10-08T15:19:00	Add test for diffs with submodules and bug fixes The adds a test for the submodule diff capabilities and then fixes a few bugs with how the output is generated. It improves the accuracy of OIDs in the diff delta object and makes the submodule output more closely mirror the OIDs that will be used by core git.
dfbff793	2012-10-08T15:14:12	Fix a few diff bugs with directory content There are a few cases where diff should leave directories in the diff list if we want to match core git, such as when the directory contains a .git dir. That feature was lost when I introduced some of the new submodule handling. This restores that and then fixes a couple of related to diff output that are triggered by having diffs with directories in them. Also, this adds a new flag that can be passed to diff if you want diff output to actually include the file content of any untracked files.
1dca8510	2012-10-05T13:44:18	Diff: Do not try to calculate an oid for a GITLINK. We don't have anything useful that we could do with that oid anyway (We need to query the submodule for the HEAD commit instead). Without this, the following code creates the error "Failed to read descriptor: Is a directory" when run against the submod2 test-case: const char* oidstr = "873585b94bdeabccea991ea5e3ec1a277895b698"; git_tree* tree = resolve_commit_oid_to_tree(g_repo, oidstr); git_diff_list* diff = NULL; cl_assert(tree); cl_git_pass(git_diff_workdir_to_tree(g_repo, NULL, tree, &diff));
7e57d250	2012-09-18T23:43:23	Diff: teach get_workdir_content to show a submodule as text 1. teach diff.c:maybe_modified to query git_submodule_status for the modification state of a submodule. According to the git_submodule_status docs, it will filter for to-ignore states already. 2. teach diff_output.c:get_workdir_content to check the submodule status again and create a line like: Subproject commit <SHA-1>\n or Subproject comimt <SHA-1>-dirty\n like git.git does.
eada0762	2012-10-02T10:45:40	Merge pull request #939 from pwkelley/ignorecase Support for the core.ignorecase flag
bae957b9	2012-09-25T16:31:46	Add const to all shared pointers in diff API There are a lot of places where the diff API gives the user access to internal data structures and many of these were being exposed through non-const pointers. This replaces them all with const pointers for any object that the user can access but is still owned internally to the git_diff_list or git_diff_patch objects. This will probably break some bindings... Sorry!
64286308	2012-09-25T10:48:50	Fix bugs in new diff patch code This fixes all the bugs in the new diff patch code. The only really interesting one is that when we merge two diffs, we now have to actually exclude diff delta records that are not supposed to be tracked, as opposed to before where they could be included because they would be skipped silently by `git_diff_foreach()`. Other than that, there are just minor errors.

9cfce273

2013-12-12T12:11:38

Cleanups, renames, and leak fixes This renames git_vector_free_all to the better git_vector_free_deep and also contains a couple of memory leak fixes based on valgrind checks. The fixes are specifically: failure to free global dir path variables when not compiled with threading on and failure to free filters from the filter registry that had not be initialized fully.

26c1cb91

2013-12-09T09:44:03

One more rename/cleanup for callback err functions

c7b3e1b3

2013-12-06T15:42:20

Some callback error check style cleanups I find this easier to read...

96869a4e

2013-12-03T16:45:39

Improve GIT_EUSER handling This adds giterr_user_cancel to return GIT_EUSER and clear any error message that is sitting around. As a result of using that in places, we need to be more thorough with capturing errors that happen inside a callback when used internally. To help with that, this also adds giterr_capture and giterr_restore so that when we internally use a foreach-type function that clears errors and converts them to GIT_EUSER, it is easier to restore not just the return value, but the actual error message text.

9f77b3f6

2013-11-25T14:21:34

Add config read fns with controlled error behavior This adds `git_config__lookup_entry` which will look up a key in a config and return either the entry or NULL if the key was not present. Optionally, it can either suppress all errors or can return them (although not finding the key is not an error for this function). Unlike other accessors, this does not normalize the config key string, so it must only be used when the key is known to be in normalized form (i.e. all lower-case before the first dot and after the last dot, with no invalid characters). This also adds three high-level helper functions to look up config values with no errors and a fallback value. The three functions are for string, bool, and int values, and will resort to the fallback value for any error that arises. They are: * `git_config__get_string_force` * `git_config__get_bool_force` * `git_config__get_int_force` None of them normalize the config `key` either, so they can only be used for internal cases where the key is known to be in normal format.

25e0b157

2013-12-06T15:07:57

Remove converting user error to GIT_EUSER This changes the behavior of callbacks so that the callback error code is not converted into GIT_EUSER and instead we propagate the return value through to the caller. Instead of using the giterr_capture and giterr_restore functions, we now rely on all functions to pass back the return value from a callback. To avoid having a return value with no error message, the user can call the public giterr_set_str or some such function to set an error message. There is a new helper 'giterr_set_callback' that functions can invoke after making a callback which ensures that some error message was set in case the callback did not set one. In places where the sign of the callback return value is meaningful (e.g. positive to skip, negative to abort), only the negative values are returned back to the caller, obviously, since the other values allow for continuing the loop. The hardest parts of this were in the checkout code where positive return values were overloaded as meaningful values for checkout. I fixed this by adding an output parameter to many of the internal checkout functions and removing the overload. This added some code, but it is probably a better implementation. There is some funkiness in the network code where user provided callbacks could be returning a positive or a negative value and we want to rely on that to cancel the loop. There are still a couple places where an user error might get turned into GIT_EUSER there, I think, though none exercised by the tests.

fcd324c6

2013-12-06T15:04:31

Add git_vector_free_all There are a lot of places that we call git__free on each item in a vector and then call git_vector_free on the vector itself. This just wraps that up into one convenient helper function.

3e57069e

2013-11-01T13:49:43

Fix --assume-unchanged support This was never really working right because we were checking the wrong flag and not checking it in all the places that we need to be checking it. I finally got around to writing a test and adding actual support for it.

a5c16f3c

2013-11-01T10:18:03

Add git_diff_options_init helper Sometimes the static initializer for git_diff_options cannot be used and since setting them to all zeroes doesn't actually work quite right, this adds a new helper for that situation. This also adds an explicit new value to the submodule settings options to be used when those enums need static initialization.

8e5a8ef8

2013-11-01T09:51:01

Convert git_index_read to have a "force" flag This is a little more intuitive than the turned-around option that I originally wrote.

4bf630b6

2013-10-31T14:36:52

Make diff and status perform soft index reload This changes `git_index_read` to have two modes - a hard index reload that always resets the index to match the on-disk data (which was the old behavior) and a soft index reload that uses the timestamp / file size information and only replaces the index data if the file on disk has been modified. This then updates the git_status code to do a soft reload unless the new GIT_STATUS_OPT_NO_REFRESH flag is passed in. This also changes the behavior of the git_diff functions that use the index so that when an index is not explicitly passed in (i.e. when the functions call git_repository_index for you), they will also do a soft reload for you. This intentionally breaks the file signature of git_index_read because there has been some confusion about the behavior previously and it seems like all existing uses of the API should probably be examined to select the desired behavior.

3940310e

2013-10-30T13:56:42

Fix some of the glaring errors in GIT_DIFF_REVERSE These changes fix the basic problem with GIT_DIFF_REVERSE being broken for text diffs. The reversed diff entries were getting added to the git_diff correctly, but some of the metadata was kept incorrectly in a way that prevented the text diffs from being generated correctly. Once I fixed that, it became clear that it was not possible to merge reversed diffs correctly. This has a first pass at fixing that problem. We probably need more tests to make sure that is really fixed thoroughly.

74a627f0

2013-10-21T09:07:19

Tweak to git_diff_delta structure for nfiles While the base git_diff_delta structure always contains two files, when we introduce conflict data, it will be helpful to have an indicator when an additional file is involved.

10672e3e

2013-10-15T15:10:07

Diff API cleanup This lays groundwork for separating formatting options from diff creation options. This groups the formatting flags separately from the diff list creation flags and reorders the options. This also tweaks some APIs to further separate code that uses patches from code that just looks at git_diffs.

3ff1d123

2013-10-11T14:51:54

Rename diff objects and split patch.h This makes no functional change to diff but renames a couple of the objects and splits the new git_patch (formerly git_diff_patch) into a new header file.

92d19d16

2013-09-21T09:34:03

Merge pull request #1840 from linquize/warning Fix warning

66566516

2013-09-08T17:15:42

Fix warning

4b11f25a

2013-09-11T16:38:33

Add ident filter This adds the ident filter (that knows how to replace $Id$) and tweaks the filter APIs and code so that git_filter_source objects actually have the updated OID of the object being filtered when it is a known value.

85d54812

2013-08-28T16:44:04

Create public filter object and use it This creates include/sys/filter.h with a basic definition of a git_filter and then converts the internal code to use it. There are related internal objects (git_filter_list) that we will want to publish at some point, but this is a first step.

e38f0d69

2013-08-05T14:06:41

Add rename from rewrites to status In git_diff_paired_foreach, temporarily resort the index->workdir diff list by index path so that we can track a rename in the workdir from head->index->workdir.

125655fe

2013-07-02T16:49:57

Untracked directories with .git should be ignored This restores a behavior that was accidentally lost during some diff refactoring where an untracked directory that contains a .git item should be treated as IGNORED, not as UNTRACKED. The submodule code already detects this, but the diff code was not handling the scenario right. This also updates a number of existing tests that were actually exercising the behavior but did not have the right expectations in place. It actually makes the new `test_diff_submodules__diff_ignore_options` test feel much better because the "not-a-submodule" entries are now ignored instead of showing up as untracked items. Fixes #1697

f9775a37

2013-06-29T23:22:31

Add ignore_submodules to diff options This adds correct support for an equivalent to --ignore-submodules in diff, where an actual ignore value can be passed to diff to override the per submodule settings in the configuration. This required tweaking the constants for ignore values so that zero would not be used and could represent an unset option to the diff. This was an opportunity to move the submodule values into include/git2/types.h and to rename the poorly named DEFAULT values for ignore and update constants to RESET instead. Now the GIT_DIFF_IGNORE_SUBMODULES flag is exactly the same as setting the ignore_submodules option to GIT_SUBMODULE_IGNORE_ALL (which is actually a minor change from the old behavior in that submodules will now be treated as UNMODIFIED deltas instead of being left out totally - if you set GIT_DIFF_INCLUDE_UNMODIFIED). This includes tests for the various new settings.

2e3e273e

2013-06-29T13:20:45

Update diff to new internal submodule status API Submodules now expose an internal status API that allows diff to get back the OID values from the submodule very easily and also to avoiding caching issues and to override the ignore setting for the submodule.

2b672d5b

2013-07-08T22:46:36

Add git_pathspec_match_diff API This adds an additional pathspec API that will match a pathspec against a diff object. This is convenient if you want to handle renames (so you need the whole diff and can't use the pathspec constraint built into the diff API) but still want to tell if the diff had any files that matched the pathspec. When the pathspec is matched against a diff, instead of keeping a list of filenames that matched, instead the API keeps the list of git_diff_deltas that matched and they can be retrieved via a new API git_pathspec_match_list_diff_entry. There are a couple of other minor API extensions here that were mostly for the sake of convenience and to reduce dependencies on knowing the internal data structure between files inside the library.

d2ce27dd

2013-06-24T23:16:06

Add public API for pathspec matching This adds a new public API for compiling pathspecs and matching them against the working directory, the index, or a tree from the repository. This also reworks the pathspec internals to allow the sharing of code between the existing internal usage of pathspec matching and the new external API. While this is working and the new API is ready for discussion, I think there is still an incorrect behavior in which patterns are always matched against the full path of an entry without taking the subdirectories into account (so "s*" will match "subdir/file" even though it wouldn't with core Git). Further enhancements are coming, but this was a good place to take a functional snapshot.

2a16914c

2013-07-03T12:20:34

Remove GIT_STATUS_SHOW_INDEX_THEN_WORKDIR option This option serves no benefit now that the git_status_list API is available. It was of questionable value before and now it would just be a bad idea to use it rather than the indexed API.

9b6075b2

2013-07-03T17:07:20

Fix segfault in git_status_foreach_ext() Add tests for the `GIT_STATUS_SHOW_XXX` flags.

22b6b82f

2013-06-20T12:16:06

Add status flags to force output sort order Files in status will, be default, be sorted according to the case insensitivity of the filesystem that we're running on. However, in some cases, this is not desirable. Even on case insensitive file systems, 'git status' at the command line will generally use a case sensitive sort (like 'ls'). Some GUIs prefer to display a list of file case insensitively even on case-sensitive platforms. This adds two new flags: GIT_STATUS_OPT_SORT_CASE_SENSITIVELY and GIT_STATUS_OPT_SORT_CASE_INSENSITIVELY that will override the default sort order of the status output and give the user control. This includes tests for exercising these new options and makes the examples/status.c program emulate core Git and always use a case sensitive sort.

852ded96

2013-06-20T11:37:58

Fix bug in diff untracked dir scan When scanning untracked directories looking for non-ignored files there was a bug where an empty directory would generate a false error.

f30fff45

2013-06-19T15:27:25

Add index pathspec-based operations This adds three new public APIs for manipulating the index: 1. `git_index_add_all` is similar to `git add -A` and will add files in the working directory that match a pathspec to the index while honoring ignores, etc. 2. `git_index_remove_all` removes files from the index that match a pathspec. 3. `git_index_update_all` updates entries in the index based on the current contents of the working directory, either added the new information or removing the entry from the index.

eefef642

2013-06-13T16:09:53

Always do tree to index diffs case sensitively Trees are always case sensitive. The index is always case preserving and will be case sensitive when it is turned into a tree. Therefore the tree and the index can and should always be compared to one another case sensitively. This will restore the index to case insensitive order after the diff has been generated. Consider this a short-term fix. The long term fix is to have the index always stored both case sensitively and case insensitively (at least on platforms that sometimes require case insensitivity).

351888cf

2013-06-13T15:37:06

Improve case handling in git_diff__paired_foreach This commit reinstates some changes to git_diff__paired_foreach that were discarded during the rebase (because the diff_output.c file had gone away), and also adjusts the case insensitively logic slightly to hopefully deal with either mismatched icase diffs and other case insensitivity scenarios.

a3e8dbb4

2013-06-13T15:32:09

Be more careful about the path with diffs This makes diff more careful about picking the canonical path when generating a delta so that it won't accidentally pick up a case-mismatched path on a case-insensitive file system. This should make sure we use the "most accurate" case correct version of the path (i.e. from the tree if possible, or the index if need be).

6de9b2ee

2013-06-12T21:10:33

util: It's called `memzero`

eb58e2d0

2013-06-12T21:05:48

Merge remote-tracking branch 'arrbee/minor-paranoia' into development

114f5a6c

2013-06-10T10:10:39

Reorganize diff and add basic diff driver This is a significant reorganization of the diff code to break it into a set of more clearly distinct files and to document the new organization. Hopefully this will make the diff code easier to understand and to extend. This adds a new `git_diff_driver` object that looks of diff driver information from the attributes and the config so that things like function content in diff headers can be provided. The full driver spec is not implemented in the commit - this is focused on the reorganization of the code and putting the driver hooks in place. This also removes a few #includes from src/repository.h that were overbroad, but as a result required extra #includes in a variety of places since including src/repository.h no longer results in pulling in the whole world.

3e9e6cda

2013-06-07T09:54:33

Add safe memset and use it This adds a `git__memset` routine that will not be optimized away and updates the places where I memset() right before a free() call to use it.

f658dc43

2013-05-31T14:09:58

Zero memory for major objects before freeing By zeroing out the memory when we free larger objects (i.e. those that serve as collections of other data, such as repos, odb, refdb), I'm hoping that it will be easier for libgit2 bindings to find errors in their object management code.

cee695ae

2013-05-31T12:18:43

Make iterators use GIT_ITEROVER & smart advance 1. internal iterators now return GIT_ITEROVER when you go past the last item in the iteration. 2. git_iterator_advance will "advance" to the first item in the iteration if it is called immediately after creating the iterator, which allows a simpler idiom for basic iteration. 3. if git_iterator_advance encounters an error reading data (e.g. a missing tree or an unreadable file), it returns the error but also attempts to advance past the invalid data to prevent an infinite loop. Updated all tests and internal usage of iterators to account for these new behaviors.

d20b0449

2013-05-24T10:37:40

Clarify GIT_DIFF_INCLUDE_UNTRACKED_CONTENT option This improves the docs for GIT_DIFF_INCLUDE_UNTRACKED_CONTENT as well as the other flags related to UNTRACKED items in diff, plus it makes that flag now automatically turn on GIT_DIFF_INCLUDE_UNTRACKED which seems like a reasonable dwim type of change.

0293450e

2013-05-17T16:57:49

Fix delta compare to use correct pathname The delta cmp function needs to choose the correct path for ordering when a delta is ADDED, RENAMED, or COPIED.

79ef3be4

2013-05-15T14:50:05

Fix diff crash when last item is untracked dir When the last item in a diff was an untracked directory that only contained ignored items, the loop to scan the contents would run off the end of the iterator and dereference a NULL pointer. This includes a test that reproduces the problem and a fix.

eb05b114

2013-05-07T22:45:01

Fix dumb type in time comparison

e35e2684

2013-05-07T04:32:17

Add GIT_DIFF_LINE_CONTEXT_EOFNL This adds a new line origin constant for the special line that is used when both files end without a newline. In the course of writing the tests for this, I was having problems with modifying a file but not having diff notice because it was the same size and modified less than one second from the start of the test, so I decided to start working on nanosecond timestamp support. This commit doesn't contain the nanosecond support, but it contains the reorganization of maybe_modified and the hooks so that if the nanosecond data were being read by stat() (or rather being copied by git_index_entry__init_from_stat), then the nsec would be taken into account. This new stuff could probably use some more tests, although there is some amount of it here.

d8041638

2013-05-02T17:22:13

fix some leaks

5fa7e469

2013-04-30T04:13:39

Fix some formatting inconsistency

e26b14c0

2013-04-26T15:35:47

Update diff handling of untracked directories When diff encounters an untracked directory, there was a shortcut that it took which is not compatible with core git. This makes the default behavior no longer take that shortcut and instead look inside the untracked directory to see if there are any untracked files within it. If there are not, then the directory is treated as an ignore directory instead of an untracked directory. This has implications for the git_status APIs.

fdb3034e

2013-04-25T14:57:13

Reorganize diff code into functions In preparation for more changes to the internal diff logic, it seemed wise to split the very large git_diff__from_iterators into separate functions that handle the four main cases (unmatched old item, unmatched new item, unmatched new directory, and matched old and new items). Hopefully this will keep the logic easier to follow even as more cases have to be added to this code.

b7f167da

2013-04-29T13:52:12

Make git_oid_cmp public and add git_oid__cmp

687db88f

2013-04-22T16:45:36

Make sure diff output is cleared on error

b1ff7004

2013-04-22T16:25:57

Improve diff config options handling This makes diff use the cvar cache for config options where possible, and also adds support for a number of other config options to diff including "diff.context", "diff.ignoreSubmodules", "diff.noprefix", "diff.mnemonicprefix", and "core.abbrev". To make this natural, this involved a rearrangement of the code that allocates the diff object vs. the code that initializes it based on the combination of options passed in by the user and read from the config. This commit includes tests for most of these new options as well.

608d0466

2013-04-22T13:51:35

Make tree to tree diffs case sensitive When case insensitive tree iterators were added, we started reading the case sensitivity of the index to decide if the tree should be case sensitive. This is good for index-to-tree comparisons, but for tree-to-tree comparisons, we should really default to doing a case sensitive comparison unless the user really wants otherwise.

a5df71c1

2013-04-19T22:36:01

Support diff.context config

ad26434b

2013-04-09T14:52:32

Tests and more fixes for submodule diffs This adds tests for diffs with submodules in them and (perhaps unsurprisingly) requires further fixes to be made. Specifically, this fixes: - when considering if a submodule is dirty in the workdir, it was being treated as dirty even if only the index was dirty. - git_diff_patch_to_str (and git_diff_patch_print) were "printing" the headers for files (and submodules) that were unmodified or had no meaningful content. - added comment to previous fix and removed unneeded parens.

ccfa6805

2013-03-25T23:58:40

Fix some diff ignores and submodule dirty workdir This started out trying to look at the problems from issue #1425 and gradually grew to a broader set of fixes. There are two core things fixed here: 1. When you had an ignore like "/bin" which is rooted at the top of your tree, instead of immediately adding the "bin/" entry as an ignored item in the diff, we were returning all of the direct descendants of the directory as ignored items. This changes things to immediately ignore the directory. Note that this effects the behavior in test_status_ignore__subdirectories so that we no longer exactly match core gits ignore behavior, but the new behavior probably makes more sense (i.e. we now will include an ignored directory inside an untracked directory that we previously would have left off). 2. When a submodule only contained working directory changes, the diff code was always considering it unmodified which was just an outright bug. The HEAD SHA of the submodule matches the SHA in the parent repo index, and since the SHAs matches, the diff code was overwriting the actual status with UNMODIFIED. These fixes broke existing tests test_diff_workdir__submodules and test_status_ignore__subdirectories but looking it over, I actually think the new results are correct and the old results were wrong. @nulltoken had actually commented on the subdirectory ignore issue previously. I also included in the tests some debugging versions of the shared iteration callback routines that print status or diff information. These aren't used actively in the tests, but can be quickly swapped in to test code to give a better picture of what is being scanned in some of the complex test scenarios.

37ee70fa

2013-03-25T22:19:39

Implement GIT_STATUS_OPT_EXCLUDE_SUBMODULES This option has been sitting unimplemented for a while, so I finally went through and implemented it along with some tests. As part of this, I improved the implementation of GIT_DIFF_IGNORE_SUBMODULES so it be more diligent about avoiding extra work and about leaving off delta records for submodules to the greatest extent possible (though it may include them still if you are request TYPECHANGE records).

0c289dd7

2013-03-25T16:40:16

Recursing into ignored dirs for diff and status This implements working versions of GIT_DIFF_RECURSE_IGNORED_DIRS and GIT_STATUS_OPT_RECURSE_IGNORED_DIRS along with some tests for the newly available behaviors. This is not turned on by default for status, but can be accessed via the options to the extended version of the command.

65025cb8

2013-03-18T17:24:13

Three submodule status bug fixes 1. Fix sort order problem with submodules where "mod" was sorting after "mod-plus" because they were being sorted as "mod/" and "mod-plus/". This involved pushing the "contains a .git entry" test significantly lower in the stack. 2. Reinstate behavior that a directory which contains a .git entry will be treated as a submodule during iteration even if it is not yet added to the .gitmodules. 3. Now that any directory containing .git is reported as submodule, we have to be more careful checking for GIT_EEXISTS when we do a submodule lookup, because that is the error code that is returned by git_submodule_lookup when you try to look up a directory containing .git that has no record in gitmodules or the index.

1ac10aae

2013-03-12T09:23:53

Merge pull request #1408 from arrbee/refactor-iterators Refactor iterators

1aa5318a

2013-03-09T16:04:34

diff: allow asking for diffs with no context Previously, 0 meant default. This is problematic, as asking for 0 context lines is a valid thing to do. Change GIT_DIFF_OPTIONS_INIT to default to three and stop treating 0 as a magic value. In case no options are provided, make sure the options in the diff object default to 3.

9bea03ce

2013-03-06T15:16:34

Add INCLUDE_TREES, DONT_AUTOEXPAND iterator flags This standardizes iterator behavior across all three iterators (index, tree, and working directory). Previously the working directory iterator behaved differently from the other two. Each iterator can now operate in one of three modes: 1. *No tree results, auto expand trees* means that only non- tree items will be returned and when a tree/directory is encountered, we will automatically descend into it. 2. *Tree results, auto expand trees* means that results will be given for every item found, including trees, but you only need to call normal git_iterator_advance to yield every item (i.e. trees returned with pre-order iteration). 3. *Tree results, no auto expand* means that calling the normal git_iterator_advance when looking at a tree will not descend into the tree, but will skip over it to the next entry in the parent. Previously, behavior 1 was the only option for index and tree iterators, and behavior 3 was the only option for workdir. The main public API implications of this are that the `git_iterator_advance_into()` call is now valid for all iterators, not just working directory iterators, and all the existing uses of working directory iterators explicitly use the GIT_ITERATOR_DONT_AUTOEXPAND (for now). Interestingly, the majority of the implementation was in the index iterator, since there are no tree entries there and now have to fake them. The tree and working directory iterators only required small modifications.

cc216a01

2013-03-05T16:29:04

Retire spoolandsort iterator Since the case sensitivity is moved into the respective iterators, this removes the spoolandsort iterator code.

169dc616

2013-03-05T16:10:05

Make iterator APIs consistent with standards The iterator APIs are not currently consistent with the parameter ordering of the rest of the codebase. This rearranges the order of parameters, simplifies the naming of a number of functions, and makes somewhat better use of macros internally to clean up the iterator code. This also expands the test coverage of iterator functionality, making sure that case sensitive range-limited iteration works correctly.

71a3d27e

2013-02-08T10:06:47

Replace diff delta binary with flags Previously the git_diff_delta recorded if the delta was binary. This replaces that (with no net change in structure size) with a full set of flags. The flag values that were already in use for individual git_diff_file objects are reused for the delta flags, too (along with renaming those flags to make it clear that they are used more generally). This (a) makes things somewhat more consistent (because I was using a -1 value in the "boolean" binary field to indicate unset, whereas now I can just use the flags that are easier to understand), and (b) will make it easier for me to add some additional flags to the delta object in the future, such as marking the results of a copy/rename detection or other deltas that might want a special indicator. While making this change, I officially moved some of the flags that were internal only into the private diff header. This also allowed me to remove a gross hack in rename/copy detect code where I was overwriting the status field with an internal value.

0d64ba48

2013-01-25T17:35:46

diff: add a notify callback to `git_diff__from_iterators` The callback will be called for each file, just before the `git_delta_t` gets inserted into the diff list. When the callback: - returns < 0, the diff process will be aborted - returns > 0, the delta will not be inserted into the diff list, but the diff process continues - returns 0, the delta is inserted into the diff list, and the diff process continues

943700ec

2013-01-18T16:37:13

Return the matched pathspec pattern in `git_pathspec_match_path` Instead of returning directly the pattern as the return value, I used an out parameter, because the function also tests if the passed pathspecs vector is empty. If yes, it considers that the path "matches", but in that case there is no matched pattern per se.

134d8c91

2013-01-08T15:53:13

Update iterator API with flags for ignore_case This changes the iterator API so that flags can be passed in to the constructor functions to control the ignore_case behavior. At this point, the flags are not supported on tree iterators (i.e. there is no functional change over the old API), but the API changes are all made to accomodate this. By the way, I went with a flags parameter because in the future I have a couple of other ideas for iterator flags that will make it easier to fix some diff/status/checkout bugs.

359fc2d2

2013-01-08T17:07:25

update copyrights

546d65a8

2013-01-02T17:01:34

Fix up spoolandsort iterator usage The spoolandsort iterator changes got sort-of cherry picked out of this branch and so I dropped the commit when rebasing; however, there were a few small changes that got dropped as well (since the version merged upstream wasn't quite the same as what I dropped).

7e5c8a5b

2012-12-10T15:31:43

More checkout improvements This flips checkout back to be driven off the changes between the baseline and the target trees. This reinstates the complex code for tracking the contents of the working directory, but overall, I think the resulting logic is easier to follow.

f616a36b

2012-12-27T22:25:52

Make spoolandsort a pushable iterator behavior An earlier change to `git_diff_from_iterators` introduced a memory leak where the allocated spoolandsort iterator was not returned to the caller and thus not freed. One proposal changes all iterator APIs to use git_iterator** so we can reallocate the iterator at will, but that seems unexpected. This commit makes it so that an iterator can be changed in place. The callbacks are isolated in a separate structure and a pointer to that structure can be reassigned by the spoolandsort extension. This means that spoolandsort doesn't create a new iterator; it just allocates a new block of callbacks (along with space for its own extra data) and swaps that into the iterator. Additionally, since spoolandsort is only needed to switch the case sensitivity of an iterator, this simplifies the API to only take the ignore_case boolean and to be a no-op if the iterator already matches the requested case sensitivity.

56c72b75

2012-12-17T11:00:53

Fix diff constructor name order confusion The diff constructor functions had some confusing names, where the "old" side of the diff was coming after the "new" side. This reverses the order in the function name to make it less confusing. Specifically... * git_diff_index_to_tree becomes git_diff_tree_to_index * git_diff_workdir_to_index becomes git_diff_index_to_workdir * git_diff_workdir_to_tree becomes git_diff_tree_to_workdir

9950d27a

2012-12-06T13:26:58

Clean up iterator APIs This removes the need to explicitly pass the repo into iterators where the repo is implied by the other parameters. This moves the repo to be owned by the parent struct. Also, this has some iterator related updates to the internal diff API to lay the groundwork for checkout improvements.

32770c52

2012-12-05T13:56:32

Fix diff header comments and missing const Based on the recent work to wrap diff in objective-git, this includes a fix for a missing const and a number of clarifications of the documentation.

c7231c45

2012-11-30T16:31:42

Deploy GITERR_CHECK_VERSION

2f8d30be

2012-11-29T15:05:04

Deploy GIT_DIFF_OPTIONS_INIT

9cd42358

2012-11-20T16:57:16

API updates for submodule.h

0cd063fd

2012-11-15T23:28:52

Merge pull request #1071 from arrbee/alternate-fix-strcmp Win32 fixes for diff/checkout/reset

4a0c7f56

2012-11-15T10:31:11

Merge pull request #1074 from edubart/ignore_diff_filemode Add option to ignore file mode in diffs

c0d5acf6

2012-11-15T14:43:21

Add option to ignore file mode in diffs

bbe6dbec

2012-11-14T23:29:48

Add explicit git_index ptr to diff and checkout A number of diff APIs and the `git_checkout_index` API take a `git_repository` object an operate on the index. This updates them to take a `git_index` pointer explicitly and only fall back on the `git_repository` index if the index input is NULL. This makes it easier to operate on a temporary index.

bad68c0a

2012-11-13T14:02:59

Add iterator for git_index object The index iterator could previously only be created from a repo object, but this allows creating an iterator from a `git_index` object instead (while keeping, though renaming, the old function).

5735bf5e

2012-11-13T13:58:29

Fix diff API to better parameter order The diff API is not in the parameter order one would expect from other libgit2 APIs. This fixes that.

a277345e

2012-11-14T22:37:13

Create internal strcmp variants for function ptrs Using the builtin strcmp and strcasecmp as function pointers is problematic on win32. This adds internal implementations and divorces us from the platform linkage.

0f3def71

2012-11-09T11:19:46

Fix various cross-platform build issues This fixes a number of warnings and problems with cross-platform builds. Among other things, it's not safe to name a member of a structure "strcmp" because that may be #defined.

a1bf70e4

2012-11-08T21:58:24

fix regression in diff with submodule oid

55cbd05b

2012-11-08T16:56:34

Some diff refactorings to help code reuse There are some diff functions that are useful in a rewritten checkout and this lays some groundwork for that. This contains three main things: 1. Share the function diff uses to calculate the OID for a file in the working directory (now named `git_diff__oid_for_file` 2. Add a `git_diff__paired_foreach` function to iterator over two diff lists concurrently. Convert status to use it. 3. Move all the string/prefix/index entry comparisons into function pointers inside the `git_diff_list` object so they can be switched between case sensitive and insensitive versions. This makes them easier to reuse in various functions without replicating logic. As part of this, move a couple of index functions out of diff.c and into index.c.

2e3d4b96

2012-11-08T16:47:28

Move pathspec code in separate files Diff uses a `git_strarray` of path specs to represent a subset of all files to be processed. It is useful to be able to reuse this filtering in other places outside diff, so I've moved it into a standalone set of utilities.

db106d01

2012-10-30T09:40:50

Move rename detection into new file This improves the naming for the rename related functionality moving it to be called `git_diff_find_similar()` and renaming all the associated constants, etc. to make more sense. I also moved the new code (plus the existing `git_diff_merge`) into a new file `diff_tform.c` where I can put new functions related to manipulating git diff lists. This also updates the implementation significantly from the last revision fixing some ordering issues (where break-rewrite needs to be handled prior to copy and rename detection) and improving config option handling.

b4f5bb07

2012-10-23T16:40:51

Initial implementation of diff rename detection This implements the basis for diff rename and copy detection, although it is based on simple SHA comparison right now instead of using a matching algortihm. Just as `git_diff_merge` can be used as a post-pass on diffs to emulate certain command line behaviors, there is a new API `git_diff_detect` which will update a diff list in-place, adjusting some deltas to RENAMED or COPIED state (and also, eventually, splitting MODIFIED deltas where the change is too large into DELETED/ADDED pairs). This also adds a new test repo that will hold rename/copy/split scenarios. Right now, it just has exact-match rename and copy, but the tests are written to use tree diffs, so we should be able to add new test scenarios easily without breaking tests.

c2e43fb1

2012-10-18T16:50:55

diff: workdir diffing in a bare repo returns EBAREREPO

0d64bef9

2012-10-05T15:56:57

Add complex checkout test and then fix checkout This started as a complex new test for checkout going through the "typechanges" test repository, but that revealed numerous issues with checkout, including: * complete failure with submodules * failure to create blobs with exec bits * problems when replacing a tree with a blob because the tree "example/" sorts after the blob "example" so the delete was being processed after the single file blob was created This fixes most of those problems and includes a number of other minor changes that made it easier to do that, including improving the TYPECHANGE support in diff/status, etc.

bc16fd3e

2012-09-28T13:40:02

Introduce status/diff TYPECHANGE flags When I wrote the diff code, I based it on core git's diff output which tends to split a type change into an add and a delete. But core git's status has the notion of a T (typechange) flag for a file. This introduces that into our status APIs and modifies the diff code so it can be forced to not split type changes.

5d1308f2

2012-10-08T15:19:00

Add test for diffs with submodules and bug fixes The adds a test for the submodule diff capabilities and then fixes a few bugs with how the output is generated. It improves the accuracy of OIDs in the diff delta object and makes the submodule output more closely mirror the OIDs that will be used by core git.

dfbff793

2012-10-08T15:14:12

Fix a few diff bugs with directory content There are a few cases where diff should leave directories in the diff list if we want to match core git, such as when the directory contains a .git dir. That feature was lost when I introduced some of the new submodule handling. This restores that and then fixes a couple of related to diff output that are triggered by having diffs with directories in them. Also, this adds a new flag that can be passed to diff if you want diff output to actually include the file content of any untracked files.

1dca8510

2012-10-05T13:44:18

Diff: Do not try to calculate an oid for a GITLINK. We don't have anything useful that we could do with that oid anyway (We need to query the submodule for the HEAD commit instead). Without this, the following code creates the error "Failed to read descriptor: Is a directory" when run against the submod2 test-case: const char* oidstr = "873585b94bdeabccea991ea5e3ec1a277895b698"; git_tree* tree = resolve_commit_oid_to_tree(g_repo, oidstr); git_diff_list* diff = NULL; cl_assert(tree); cl_git_pass(git_diff_workdir_to_tree(g_repo, NULL, tree, &diff));

7e57d250

2012-09-18T23:43:23

Diff: teach get_workdir_content to show a submodule as text 1. teach diff.c:maybe_modified to query git_submodule_status for the modification state of a submodule. According to the git_submodule_status docs, it will filter for to-ignore states already. 2. teach diff_output.c:get_workdir_content to check the submodule status again and create a line like: Subproject commit <SHA-1>\n or Subproject comimt <SHA-1>-dirty\n like git.git does.

eada0762

2012-10-02T10:45:40

Merge pull request #939 from pwkelley/ignorecase Support for the core.ignorecase flag

bae957b9

2012-09-25T16:31:46

Add const to all shared pointers in diff API There are a lot of places where the diff API gives the user access to internal data structures and many of these were being exposed through non-const pointers. This replaces them all with const pointers for any object that the user can access but is still owned internally to the git_diff_list or git_diff_patch objects. This will probably break some bindings... Sorry!

64286308

2012-09-25T10:48:50

Fix bugs in new diff patch code This fixes all the bugs in the new diff patch code. The only really interesting one is that when we merge two diffs, we now have to actually exclude diff delta records that are not supposed to be tracked, as opposed to before where they could be included because they would be skipped silently by `git_diff_foreach()`. Other than that, there are just minor errors.

thodg/libgit2/src/diff.c

src/diff.c

Log