|
5265b31c
|
2019-01-23T15:00:20
|
|
streams: fix callers potentially only writing partial data
Similar to the write(3) function, implementations of `git_stream_write`
do not guarantee that all bytes are written. Instead, they return the
number of bytes that actually have been written, which may be smaller
than the total number of bytes. Furthermore, due to an interface design
issue, we cannot ever write more than `SSIZE_MAX` bytes at once, as
otherwise we cannot represent the number of bytes written to the caller.
Unfortunately, no caller of `git_stream_write` ever checks the return
value, except to verify that no error occurred. Due to this, they are
susceptible to the case where only partial data has been written.
Fix this by introducing a new function `git_stream__write_full`. In
contrast to `git_stream_write`, it will always return either success or
failure, without returning the number of bytes written. Thus, it is able
to write all `SIZE_MAX` bytes and loop around `git_stream_write` until
all data has been written. Adjust all callers except the BIO callbacks
in our mbedtls and OpenSSL streams, which already do the right thing and
require the amount of bytes written.
|
|
f673e232
|
2018-12-27T13:47:34
|
|
git_error: use new names in internal APIs and usage
Move to the `git_error` name in the internal API for error-related
functions.
|
|
35d86c77
|
2019-01-14T10:14:36
|
|
proxy: fix crash on remote connection with GIT_PROXY_AUTO but no proxy is detected
|
|
|
30ac46aa
|
2018-11-28T10:12:43
|
|
http: reset replay_count upon connection
Reset the replay_count upon a successful connection. It's possible that
we could encounter a situation where we connect successfully but need to
replay a request - for example, a connection and initial request
succeeds without authentication but a subsequent call does require
authentication. Reset the replay count upon any successful request to
afford subsequent replays room to manuever.
|
|
|
52478d7d
|
2018-11-18T19:54:49
|
|
http: don't allow SSL connections to a proxy
Temporarily disallow SSL connections to a proxy until we can understand
the valgrind warnings when tunneling OpenSSL over OpenSSL.
|
|
|
41f620d9
|
2018-11-18T19:10:50
|
|
http: only load proxy configuration during connection
Only load the proxy configuration during connection; we need this data
when we're going to connect to the server, however we may mutate it
after connection (connecting through a CONNECT proxy means that we
should send requests like normal). If we reload the proxy configuration
but do not actually reconnect (because we're in a keep-alive session)
then we will reload the proxy configuration that we should have mutated.
Thus, only load the proxy configuration when we know that we're going to
reconnect.
|
|
|
0467606f
|
2018-11-18T11:00:11
|
|
http: disallow repeated headers from servers
Don't allow servers to send us multiple Content-Type, Content-Length
or Location headers.
|
|
|
21142c5a
|
2018-10-29T10:04:48
|
|
http: remove cURL
We previously used cURL to support HTTP proxies. Now that we've added
this support natively, we can remove the curl dependency.
|
|
|
5d4e1e04
|
2018-10-28T21:27:56
|
|
http: use CONNECT to talk to proxies
Natively support HTTPS connections through proxies by speaking CONNECT
to the proxy and then adding a TLS connection on top of the socket.
|
|
|
43b592ac
|
2018-10-25T08:49:01
|
|
tls: introduce a wrap function
Introduce `git_tls_stream_wrap` which will take an existing `stream`
with an already connected socket and begin speaking TLS on top of it.
This is useful if you've built a connection to a proxy server and you
wish to begin CONNECT over it to tunnel a TLS connection.
Also update the pluggable TLS stream layer so that it can accept a
registration structure that provides an `init` and `wrap` function,
instead of a single initialization function.
|
|
|
b2ed778a
|
2018-11-18T22:20:10
|
|
http transport: reset error message on cert failure
Store the error message from the underlying TLS library before calling
the certificate callback. If it refuses to act (demonstrated by
returning GIT_PASSTHROUGH) then restore the error message. Otherwise,
if the callback does not set an error message, set a sensible default
that implicates the callback itself.
|
|
|
2ce2315c
|
2018-10-22T17:33:45
|
|
http transport: support cert check for proxies
Refactor certificate checking so that it can easily be called for
proxies or the remote server.
|
|
|
74c6e08e
|
2018-10-22T14:56:53
|
|
http transport: provide proxy credentials
|
|
|
496da38c
|
2018-10-22T12:48:45
|
|
http transport: refactor storage
Create a simple data structure that contains information about the
server being connected to, whether that's the actual remote endpoint
(git server) or an intermediate proxy. This allows for organization of
streams, authentication state, etc.
|
|
|
6af8572c
|
2018-10-22T11:29:01
|
|
http transport: cap number of authentication replays
Put a limit on the number of authentication replays in the HTTP
transport. Standardize on 7 replays for authentication or redirects,
which matches the behavior of the WinHTTP transport.
|
|
|
22654812
|
2018-10-22T11:24:05
|
|
http transport: prompt for proxy credentials
Teach the HTTP transport how to prompt for proxy credentials.
|
|
|
0328eef6
|
2018-10-22T11:14:06
|
|
http transport: further refactor credential handling
Prepare credential handling to understand both git server and proxy
server authentication.
|
|
|
32cb56ce
|
2018-10-22T10:16:54
|
|
http transport: refactor credential handling
Factor credential handling into its own function. Additionally, add
safety checks to ensure that we are in a valid state - that we have
received a valid challenge from the server and that we have
configuration to respond to that challenge.
|
|
|
e6e399ab
|
2018-10-22T09:49:54
|
|
http transport: use HTTP proxies when requested
The HTTP transport should understand how to apply proxies when
configured with `GIT_PROXY_SPECIFIED` and `GIT_PROXY_SPECIFIED`.
When a proxy is configured, the HTTP transport will now connect
to the proxy (instead of directly to the git server), and will
request the properly-formed URL of the git server endpoint.
|
|
|
e6f1931a
|
2018-10-22T00:09:24
|
|
http: rename http subtransport's `io` to `gitserver_stream`
Rename `http_subtransport->io` to `http_subtransport->gitserver_stream`
to clarify its use, especially as we might have additional streams (eg
for a proxy) in the future.
|
|
|
c07ff4cb
|
2018-10-21T14:17:06
|
|
http: rename `connection_data` -> `gitserver_data`
Rename the `connection_data` struct member to `gitserver_data`, to
disambiguate future `connection_data`s that apply to the proxy, not the
final server endpoint.
|
|
|
ed72465e
|
2018-10-13T19:16:54
|
|
proxy: propagate proxy configuration errors
|
|
|
c97d302d
|
2018-11-28T13:45:41
|
|
Merge pull request #4879 from libgit2/ethomson/defer_cert_cred_cb
Allow certificate and credential callbacks to decline to act
|
|
|
a2e6e0ea
|
2018-11-06T14:15:43
|
|
transport: allow cred/cert callbacks to return GIT_PASSTHROUGH
Allow credential and certificate checking callbacks to return
GIT_PASSTHROUGH, indicating that they do not want to act.
Introduce this to support in both the http and ssh callbacks.
Additionally, enable the same mechanism for certificate validation.
This is most useful to disambiguate any meaning in the publicly exposed
credential and certificate functions (`git_transport_smart_credentials`
and `git_transport_smart_certificate_check`) but it may be more
generally useful for callers to be able to defer back to libgit2.
|
|
83b35181
|
2018-10-19T10:54:38
|
|
transport/http: Include non-default ports in Host header
When the port is omitted, the server assumes the default port for the
service is used (see
https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Host). In
cases where the client provided a non-default port, it should be passed
along.
This hasn't been an issue so far as the git protocol doesn't include
server-generated URIs. I encountered this when implementing Rust
registry support for Sonatype Nexus. Rust's registry uses a git
repository for the package index. Clients look at a file in the root of
the package index to find the base URL for downloading the packages.
Sonatype Nexus looks at the incoming HTTP request (Host header and URL)
to determine the client-facing URL base as it may be running behind a
load balancer or reverse proxy. This client-facing URL base is then used
to construct the package download base URL. When libgit2 fetches the
index from Nexus on a non-default port, Nexus trusts the incorrect Host
header and generates an incorrect package download base URL.
|
|
9b6e4081
|
2018-10-15T17:08:38
|
|
Merge commit 'afd10f0' (Follow 308 redirects)
|
|
afd10f0b
|
2018-10-13T09:31:20
|
|
Follow 308 redirects (as used by GitLab)
|
|
475db39b
|
2018-10-06T12:58:06
|
|
ignore unsupported http authentication schemes
auth_context_match returns 0 instead of -1 for unknown schemes to
not fail in situations where some authentication schemes are supported
and others are not.
apply_credentials is adjusted to handle auth_context_match returning
0 without producing authentication context.
|
|
1c949ce1
|
2018-08-21T02:11:32
|
|
transport/http: do not return success if we failed to get a scheme
Otherwise we return a NULL context, which will get dereferenced in
apply_credentials.
|
|
|
ecf4f33a
|
2018-02-08T11:14:48
|
|
Convert usage of `git_buf_free` to new `git_buf_dispose`
|
|
|
ee6be190
|
2018-01-31T08:36:19
|
|
http: standardize user-agent addition
The winhttp and posix http each need to add the user-agent to their
requests. Standardize on a single function to include this so that we
do not get the version numbers we're sending out of sync.
Assemble the complete user agent in `git_http__user_agent`, returning
assembled strings.
Co-authored-by: Patrick Steinhardt <ps@pks.im>
|
|
|
e9369856
|
2017-03-21T00:25:15
|
|
stream: Gather streams to src/streams
|
|
|
0c7f49dd
|
2017-06-30T13:39:01
|
|
Make sure to always include "common.h" first
Next to including several files, our "common.h" header also declares
various macros which are then used throughout the project. As such, we
have to make sure to always include this file first in all
implementation files. Otherwise, we might encounter problems or even
silent behavioural differences due to macros or defines not being
defined as they should be. So in fact, our header and implementation
files should make sure to always include "common.h" first.
This commit does so by establishing a common include pattern. Header
files inside of "src" will now always include "common.h" as its first
other file, separated by a newline from all the other includes to make
it stand out as special. There are two cases for the implementation
files. If they do have a matching header file, they will always include
this one first, leading to "common.h" being transitively included as
first file. If they do not have a matching header file, they instead
include "common.h" as first file themselves.
This fixes the outlined problems and will become our standard practice
for header and source files inside of the "src/" from now on.
|
|
39e76bb3
|
2017-01-27T16:05:20
|
|
Do not discard proxy_options that have been set when auto is specified
|
|
a6d833a2
|
2017-01-13T17:05:58
|
|
Merge pull request #4049 from libgit2/ethomson/error_msgs
giterr_set: consistent error messages
|
|
|
9a64e62f
|
2016-12-21T21:24:33
|
|
http: check certificate validity before clobbering the error variable
|
|
909d5494
|
2016-12-29T12:25:15
|
|
giterr_set: consistent error messages
Error messages should be sentence fragments, and therefore:
1. Should not begin with a capital letter,
2. Should not conclude with punctuation, and
3. Should not end a sentence and begin a new one
|
|
|
fafafb1f
|
2016-12-20T16:19:30
|
|
http: bump the pretend git version in the User-Agent
We want to keep the git UA in order for services to recognise that we're
a Git client and not a browser. But in order to stop dumb HTTP some
services have blocked UAs that claim to be pre-1.6.6 git.
Thread these needles by using the "git/2.0" prefix which is still close
enough to git's yet distinct enough that you can tell it's us.
|
|
|
b1453601
|
2016-08-17T11:38:26
|
|
transports: http: reset `connected` flag when closing transport
|
|
|
c4cba4e9
|
2016-08-17T11:00:05
|
|
transports: http: reset `connected` flag when re-connecting transport
When calling `http_connect` on a subtransport whose stream is already
connected, we first close the stream in case no keep-alive is in use.
When doing so, we do not reset the transport's connection state,
though. Usually, this will do no harm in case the subsequent connect
will succeed. But when the connection fails we are left with a
substransport which is tagged as connected but which has no valid
stream attached.
Fix the issue by resetting the subtransport's connected-state when
closing its stream in `http_connect`.
|
|
bdec62dc
|
2016-07-06T13:06:25
|
|
remove conditions that prevent use of custom TLS stream
|
|
6c9eb86f
|
2016-06-19T11:46:43
|
|
HTTP authentication scheme name is case insensitive.
|
|
|
0d72f67f
|
2016-03-14T17:36:04
|
|
proxy: don't specify the protocol in the type
We leave this up to the scheme in the url field. The type should only
tell us about whether we want a proxy and whether we want to auto-detect
it.
|
|
|
b373e9a6
|
2015-09-21T22:38:50
|
|
net: use proxy options struct in the stream config
|
|
|
94bac76c
|
2015-10-02T03:46:34
|
|
http: use a custom user-agent if the user has set it
We still prefix it with "git/1.0" since that's required in many
situations, but we replace the area which mentions libgit2.
|
|
d7375662
|
2015-09-25T10:16:16
|
|
Copy custom_headers insteach of referencing the caller's copy
|
|
|
35969c68
|
2015-09-10T08:58:23
|
|
Ignore NULL headers
|
|
|
276f6aa0
|
2015-09-08T14:00:37
|
|
Hook up the custom_headers to the http transport
|
|
|
24f5b4e1
|
2015-09-08T13:34:42
|
|
Drop extra_http_headers from git_remote
|
|
|
59d6128e
|
2015-09-04T09:36:50
|
|
Allow the world to set HTTP headers for remotes
|
|
|
ac9b5127
|
2015-09-04T09:20:45
|
|
Pull extra_http_headers from the git_remote
|
|
|
6af6e690
|
2015-09-04T09:18:32
|
|
Put the extra headers on the connection_data instead
|
|
|
c3733e56
|
2015-09-04T08:56:26
|
|
Add more headers to HTTP requests
|
|
|
11bca2d2
|
2015-08-15T18:15:23
|
|
http: propagate the credentials callback's error code
When we ask for credentials, the user may choose to return EUSER to
indicate that an error has happened on its end and it wants to be given
back control.
We must therefore pass that back to the user instead of mentioning that
it was on_headers_complete() that returned an error code. Since we can,
we return the exact error code from the user (other than PASSTHROUGH)
since it doesn't cost anything, though using other error codes aren't
recommended.
|
|
31a76374
|
2015-07-29T22:23:00
|
|
case-insensitive check for WWW-Authenticate header
Fixes issue #3338
|
|
768f8be3
|
2015-06-30T19:00:41
|
|
Fix #3094 - improve use of portable size_t/ssize_t format specifiers.
The header src/cc-compat.h defines portable format specifiers PRIuZ, PRIdZ, and PRIxZ. The original report highlighted the need to use these specifiers in examples/network/fetch.c. For this commit, I checked all C source and header files not in deps/ and transitioned to the appropriate format specifier where appropriate.
|
|
1630981e
|
2015-06-30T09:03:23
|
|
http: fixed leak when asking for credentials again
t->cred might have been allocated the previous time and needs to be
freed before asking caller for credentials again.
|
|
|
8b380060
|
2015-06-29T21:12:44
|
|
http: don't give up on auth on the first try
When the server rejects an authentication request, ask the caller for
the credentials again, instead of giving up on the first try.
|
|
|
8443f492
|
2015-06-11T16:57:04
|
|
curl: remove the encrypted param to the constructor
We do not want libcurl to perform the TLS negotiation for us, so we
don't need to pass this option.
|
|
|
f97d5d09
|
2015-06-11T16:54:48
|
|
http: ask for the curl stream for non-encrypted connections
The TLS streams talk over the curl stream themselves, so we don't need
to ask for it explicitly. Do so in the case of the non-encrypted one so
we can still make use proxies in that case.
|
|
|
8762d721
|
2015-06-07T14:51:10
|
|
http: set the proxy if the stream supports it
Of the built-in ones, only cURL support it, but there's no reason a
user-provided stream wouldn't support it.
|
|
|
8dea1c21
|
2015-06-05T11:02:11
|
|
Implement a curl stream
cURL has a mode in which it acts a lot like our streams, providing send
and recv functions and taking care of the TLS and proxy setup for us.
Implement a new stream which uses libcurl instead of raw sockets or the
TLS libraries directly. This version does not support reporting
certificates or proxies yet.
|
|
7dd22538
|
2015-05-11T10:19:25
|
|
centralizing all IO buffer size values
|
|
|
24e53d2f
|
2015-03-19T09:55:20
|
|
Rename GIT_SSL to GIT_OPENSSL
This is what it's meant all along, but now we actually have multiple
implementations, it's clearer to use the name of the library.
|
|
|
6946a3be
|
2015-03-19T00:18:03
|
|
Abstract away the TLS stream implementation
Instead, provide git_tls_stream_new() to ask for the most appropriate
encrypted stream and use it in our HTTP transport.
|
|
|
6bb54cbf
|
2014-11-02T13:23:32
|
|
Add a SecureTransport TLS channel
As an alternative to OpenSSL when we're on OS X. This one can actually
take advantage of stacking the streams.
|
|
|
c5e07187
|
2015-03-24T14:03:51
|
|
Merge pull request #2990 from leoyanggit/custom_param
Add a custom param to git_smart_subtransport_definition
|
|
142e5379
|
2015-03-17T12:49:33
|
|
Add a custom param to git_smart_subtransport_definition
The smart transport has already take the payload param. For the
sub transport a payload param is useful for the implementer.
|
|
|
84d83b8e
|
2015-03-16T19:41:50
|
|
http: do not try to use the cert callback on unencrypted streams
When the user has a certificate check callback set, we still have to
check whether the stream we're using is even capable of providing a
certificate.
In the case of an unencrypted certificate, do not ask for it from the
stream, and do not call the callback.
|
|
|
e892b6a9
|
2015-03-03T17:23:01
|
|
http: enforce the credential types
The user may decide to return any type of credential, including ones we
did not say we support. Add a check to make sure the user returned an
object of the right type and error out if not.
|
|
|
a2fd56ab
|
2014-12-10T16:22:50
|
|
Fix a couple of compiler warnings
|
|
|
b6f5464e
|
2014-11-01T21:35:06
|
|
Port HTTP(S) to the new stream API
|
|
|
1ca61bdc
|
2014-11-19T20:53:25
|
|
fetch: clear the connection data on close
When we fetch twice with the same remote object, we did not properly
clear the connection flags, so we would leak state from the last
connection.
This can cause the second fetch with the same remote object to fail if
using a HTTP URL where the server redirects to HTTPS, as the second
fetch would see `use_ssl` set and think the initial connection wanted to
downgrade the connection.
|
|
369b0217
|
2014-10-13T13:34:15
|
|
Clean up various compiler warnings
|
|
e6e834a1
|
2014-09-18T12:23:07
|
|
Provide host name to certificate_check_cb
Signed-off-by: Sven Strickroth <email@cs-ware.de>
|
|
|
0782fc43
|
2014-09-16T01:47:30
|
|
net: use only structs to pass information about cert
Instead of spreading the data in function arguments, some of which
aren't used for ssh and having a struct only for ssh, use a struct for
both, using a common parent to pass to the callback.
|
|
|
41698f22
|
2014-09-11T10:04:05
|
|
net: remove support for outright ignoring certificates
This option make it easy to ignore anything about the server we're
connecting to, which is bad security practice. This was necessary as we
didn't use to expose detailed information about the certificate, but now
that we do, we should get rid of this.
If the user wants to ignore everything, they can still provide a
callback which ignores all the information passed.
|
|
|
23ca0ad5
|
2014-08-29T21:25:13
|
|
Bring certificate check back to the normal return code
Returning 0 lets the certificate check succeed. An error code is bubbled
up to the user.
|
|
|
17491f6e
|
2014-08-29T17:18:23
|
|
transport: always call the certificate check callback
We should let the user decide whether to cancel the connection or not
regardless of whether our checks have decided that the certificate is
fine. We provide our own assessment to the callback to let the user fall
back to our checks if they so desire.
|
|
|
ec1ce458
|
2014-08-10T17:06:53
|
|
http: send the DER-encoded cert to the callback
Instead of the parsed data, we can ask OpenSSL to give us the
DER-encoded version of the certificate, which the user can then parse
and validate.
|
|
|
9b940586
|
2014-07-04T12:45:43
|
|
Provide a callback for certificate validation
If the certificate validation fails (or always in the case of ssh),
let the user decide whether to allow the connection.
The data structure passed to the user is the native certificate
information from the underlying implementation, namely OpenSSL or
WinHTTP.
|
|
|
294c6f29
|
2014-08-16T22:12:13
|
|
http: make sure we can consume the data we request
The recv buffer (parse_buffer) and the buffer have independent sizes and
offsets. We try to fill in parse_buffer as much as possible before
passing it to the http parser. This is fine most of the time, but fails
us when the buffer is almost full.
In those situations, parse_buffer can have more data than we would be
able to put into the buffer (which may be getting full if we're towards
the end of a data sideband packet).
To work around this, we check if the space we have left on our buffer is
smaller than what could come from the network. If this happens, we make
parse_buffer think that it has as much space left as our buffer, so it
won't try to retrieve more data than we can deal with.
As the start of the data may no longer be at the start of the buffer, we
need to keep track of where it really starts (data_offset) and use that
in our calculations for the real size of the data we received from the
network.
This fixes #2518.
|
|
|
23135afa
|
2014-08-14T11:52:20
|
|
Introduce proper http authentication API
|
|
|
315cb38e
|
2014-07-31T18:43:20
|
|
Add GSSAPI support for SPNEGO/Kerberos auth over HTTP
|
|
|
e003f83a
|
2014-07-31T15:14:56
|
|
Introduce git_buf_decode_base64
Decode base64-encoded text into a git_buf
|
|
|
40867266
|
2014-07-31T18:39:58
|
|
Perform HTTP keep-alive
|
|
|
9c3e4e97
|
2014-06-13T02:35:33
|
|
http: fix typo in credentials logic
We want to check whether the credentials callback is NULL, not whether
the payload is.
|
|
|
bc0a6198
|
2014-04-19T15:52:58
|
|
transports: allow the creds callback to say it doesn't exist
Allow the credentials callback to return GIT_PASSTHROUGH to make the
transports code behave as though none was set.
This should make it easier for bindings to behave closer to the C code
when there is no credentials callback set at their level.
|
|
9cfce273
|
2013-12-12T12:11:38
|
|
Cleanups, renames, and leak fixes
This renames git_vector_free_all to the better git_vector_free_deep
and also contains a couple of memory leak fixes based on valgrind
checks. The fixes are specifically: failure to free global dir
path variables when not compiled with threading on and failure to
free filters from the filter registry that had not be initialized
fully.
|
|
|
25e0b157
|
2013-12-06T15:07:57
|
|
Remove converting user error to GIT_EUSER
This changes the behavior of callbacks so that the callback error
code is not converted into GIT_EUSER and instead we propagate the
return value through to the caller. Instead of using the
giterr_capture and giterr_restore functions, we now rely on all
functions to pass back the return value from a callback.
To avoid having a return value with no error message, the user
can call the public giterr_set_str or some such function to set
an error message. There is a new helper 'giterr_set_callback'
that functions can invoke after making a callback which ensures
that some error message was set in case the callback did not set
one.
In places where the sign of the callback return value is
meaningful (e.g. positive to skip, negative to abort), only the
negative values are returned back to the caller, obviously, since
the other values allow for continuing the loop.
The hardest parts of this were in the checkout code where positive
return values were overloaded as meaningful values for checkout.
I fixed this by adding an output parameter to many of the internal
checkout functions and removing the overload. This added some
code, but it is probably a better implementation.
There is some funkiness in the network code where user provided
callbacks could be returning a positive or a negative value and
we want to rely on that to cancel the loop. There are still a
couple places where an user error might get turned into GIT_EUSER
there, I think, though none exercised by the tests.
|
|
1b02baf4
|
2013-09-26T16:25:05
|
|
Adjust to new utility signature
|
|
|
83fbd368
|
2013-09-26T15:58:41
|
|
Deploy gitno_connection_data into transport
|
|
|
8988688c
|
2013-09-25T20:41:56
|
|
Migrate redirect URL handling to common utility
|
|
|
46fbc88e
|
2013-09-24T14:50:06
|
|
Prevent HTTPS to HTTP redirect
|
|
|
eb0ff130
|
2013-09-24T14:07:08
|
|
Disconnect path string to preserve after redirect
The subtransport path was relying on pointing to data owned by
the remote which meant that after a redirect, the updated path
was getting lost for future requests. This updates the http
transport to strdup the path and maintain its own lifetime.
This also pulls responsibility for parsing the URL back into the
http transport and isolates the functions that parse and free that
connection data so that they can be reused between the initial
parsing and the redirect parsing.
|
|
|
210d5325
|
2013-09-23T12:09:23
|
|
Allow redirects to use same host
|
|
35e0f3c6
|
2013-03-25T17:59:30
|
|
Refine the redirect check condition
|
|
|
2c7f7a66
|
2013-03-25T17:35:36
|
|
http: Support 302 Found (arrbee did most of the work)
|
|
|
54ffc1f7
|
2013-01-31T14:41:01
|
|
HTTP: use creds in url if available
|
|
|
cf7038a6
|
2013-01-31T14:04:21
|
|
Enhance url parsing to include passwords
|