kmx git

Commit	Date	Message
0c7f49dd	2017-06-30T13:39:01	Make sure to always include "common.h" first Next to including several files, our "common.h" header also declares various macros which are then used throughout the project. As such, we have to make sure to always include this file first in all implementation files. Otherwise, we might encounter problems or even silent behavioural differences due to macros or defines not being defined as they should be. So in fact, our header and implementation files should make sure to always include "common.h" first. This commit does so by establishing a common include pattern. Header files inside of "src" will now always include "common.h" as its first other file, separated by a newline from all the other includes to make it stand out as special. There are two cases for the implementation files. If they do have a matching header file, they will always include this one first, leading to "common.h" being transitively included as first file. If they do not have a matching header file, they instead include "common.h" as first file themselves. This fixes the outlined problems and will become our standard practice for header and source files inside of the "src/" from now on.
2ed855a9	2016-02-07T13:16:30	filter: avoid races during filter registration Previously we would set the global filter registry structure before adding filters to the structure, without a lock, which is quite racy. Now, register default filters during global registration and use an rwlock to read and write the filter registry (as appopriate).
9c9aa1ba	2015-02-19T11:32:55	filter: take `temp_buf` in `git_filter_options`
d05218b0	2015-02-19T11:25:26	filter: add `git_filter_list__load_ext` Refactor `git_filter_list__load_with_attr_reader` into `git_filter_list__load_ext`, which takes a `git_filter_options`.
795eaccd	2015-02-19T11:09:54	git_filter_opt_t -> git_filter_flag_t For consistency with the rest of the library, where an opt is an options structure.
646364e7	2015-02-17T20:25:31	checkout: maintain temporary buffer for filters Let the filters use the checkout data's temporary buffer, instead of having to allocate new buffers each time.
9f779aac	2015-01-29T14:40:55	attrcache: don't re-read attrs during checkout During checkout, assume that the .gitattributes files aren't modified during the checkout. Instead, create an "attribute session" during checkout. Assume that attribute data read in the same checkout "session" hasn't been modified since the checkout started. (But allow subsequent checkouts to invalidate the cache.) Further, cache nonexistent git_attr_file data even when .gitattributes files are not found to prevent re-scanning for nonexistent files.
d0f00de4	2014-05-16T11:08:19	Increase binary detection len to 8k
4b11f25a	2013-09-11T16:38:33	Add ident filter This adds the ident filter (that knows how to replace $Id$) and tweaks the filter APIs and code so that git_filter_source objects actually have the updated OID of the object being filtered when it is a known value.
2a7d224f	2013-09-10T16:33:32	Extend public filter api with filter lists This moves the git_filter_list into the public API so that users can create, apply, and dispose of filter lists. This allows more granular application of filters to user data outside of libgit2 internals. This also converts all the internal usage of filters to the public APIs along with a few small tweaks to make it easier to use the public git_buffer stuff alongside the internal git_buf.
0cf77103	2013-08-26T23:17:07	Start of filter API + git_blob_filtered_content This begins the process of exposing git_filter objects to the public API. This includes: * new public type and API for `git_buffer` through which an allocated buffer can be passed to the user * new API `git_blob_filtered_content` * make the git_filter type and GIT_FILTER_TO_... constants public
85d54812	2013-08-28T16:44:04	Create public filter object and use it This creates include/sys/filter.h with a basic definition of a git_filter and then converts the internal code to use it. There are related internal objects (git_filter_list) that we will want to publish at some point, but this is a first step.
3658e81e	2013-03-25T14:20:07	Move crlf conversion into buf_text This adds crlf/lf conversion functions into buf_text with more efficient implementations that bypass the high level buffer functions. They attempt to minimize the number of reallocations done and they directly write the buffer data as needed if they know that there is enough memory allocated to memcpy data. Tests are added for these new functions. The crlf.c code is updated to use the new functions. Removed the include of buf_text.h from filter.h and just include it more narrowly in the places that need it.
359fc2d2	2013-01-08T17:07:25	update copyrights
7bf87ab6	2012-11-28T09:58:48	Consolidate text buffer functions There are many scattered functions that look into the contents of buffers to do various text manipulations (such as escaping or unescaping data, calculating text stats, guessing if content is binary, etc). This groups all those functions together into a new file and converts the code to use that. This has two enhancements to existing functionality. The old text stats function is significantly rewritten and the BOM detection code was extended (although largely we can't deal with anything other than a UTF8 BOM).
5e4cb4f4	2012-09-17T10:38:57	checkout : reduce memory usage when not filtering
3aa443a9	2012-08-20T16:56:45	checkout: introduce git_checkout_tree()
9587895f	2012-07-16T12:06:23	Migrate code to git_filter_blob_contents. Also removes the unnecessary check for filter length, since git_filters_apply does the right thing when there are none, and it's more efficient than this.
f2d42eea	2012-07-09T20:21:22	Checkout: add structure for CRLF.
e172cf08	2012-05-18T01:21:06	errors: Rename the generic return codes
f2c25d18	2012-03-02T20:08:00	config: Implement a proper cvar cache
47a899ff	2012-03-01T21:19:51	filter: Beautiful refactoring Comments soothe my soul.
c5266eba	2012-03-01T01:16:25	filter: Precache the filter config options on load
27950fa3	2012-02-29T01:26:03	filter: Add write-to CRLF filter
450b40ca	2012-02-28T01:13:32	filter: Load attributes for file
44b1ff4c	2012-02-27T04:31:05	filter: Apply filters before writing a file to the ODB Initial implementation. The relevant code is in `blob.c`: the blob write function has been split into smaller functions. - Directly write a file to the ODB in streaming mode - Directly write a symlink to the ODB in direct mode - Apply a filter, and write a file to the ODB in direct mode When trying to write a file, we first call `git_filter__load_for_file`, which populates a filters array with the required filters based on the filename. If no filters are resolved to the filename, we can write to the ODB in streaming mode straight from disk. Otherwise, we load the whole file in memory and use double-buffering to apply the filter chain. We finish by writing the file as a whole to the ODB.

0c7f49dd

2017-06-30T13:39:01

Make sure to always include "common.h" first Next to including several files, our "common.h" header also declares various macros which are then used throughout the project. As such, we have to make sure to always include this file first in all implementation files. Otherwise, we might encounter problems or even silent behavioural differences due to macros or defines not being defined as they should be. So in fact, our header and implementation files should make sure to always include "common.h" first. This commit does so by establishing a common include pattern. Header files inside of "src" will now always include "common.h" as its first other file, separated by a newline from all the other includes to make it stand out as special. There are two cases for the implementation files. If they do have a matching header file, they will always include this one first, leading to "common.h" being transitively included as first file. If they do not have a matching header file, they instead include "common.h" as first file themselves. This fixes the outlined problems and will become our standard practice for header and source files inside of the "src/" from now on.

2ed855a9

2016-02-07T13:16:30

filter: avoid races during filter registration Previously we would set the global filter registry structure before adding filters to the structure, without a lock, which is quite racy. Now, register default filters during global registration and use an rwlock to read and write the filter registry (as appopriate).

9c9aa1ba

2015-02-19T11:32:55

filter: take `temp_buf` in `git_filter_options`

d05218b0

2015-02-19T11:25:26

filter: add `git_filter_list__load_ext` Refactor `git_filter_list__load_with_attr_reader` into `git_filter_list__load_ext`, which takes a `git_filter_options`.

795eaccd

2015-02-19T11:09:54

git_filter_opt_t -> git_filter_flag_t For consistency with the rest of the library, where an opt is an options *structure*.

646364e7

2015-02-17T20:25:31

checkout: maintain temporary buffer for filters Let the filters use the checkout data's temporary buffer, instead of having to allocate new buffers each time.

9f779aac

2015-01-29T14:40:55

attrcache: don't re-read attrs during checkout During checkout, assume that the .gitattributes files aren't modified during the checkout. Instead, create an "attribute session" during checkout. Assume that attribute data read in the same checkout "session" hasn't been modified since the checkout started. (But allow subsequent checkouts to invalidate the cache.) Further, cache nonexistent git_attr_file data even when .gitattributes files are not found to prevent re-scanning for nonexistent files.

d0f00de4

2014-05-16T11:08:19

Increase binary detection len to 8k

4b11f25a

2013-09-11T16:38:33

Add ident filter This adds the ident filter (that knows how to replace $Id$) and tweaks the filter APIs and code so that git_filter_source objects actually have the updated OID of the object being filtered when it is a known value.

2a7d224f

2013-09-10T16:33:32

Extend public filter api with filter lists This moves the git_filter_list into the public API so that users can create, apply, and dispose of filter lists. This allows more granular application of filters to user data outside of libgit2 internals. This also converts all the internal usage of filters to the public APIs along with a few small tweaks to make it easier to use the public git_buffer stuff alongside the internal git_buf.

0cf77103

2013-08-26T23:17:07

Start of filter API + git_blob_filtered_content This begins the process of exposing git_filter objects to the public API. This includes: * new public type and API for `git_buffer` through which an allocated buffer can be passed to the user * new API `git_blob_filtered_content` * make the git_filter type and GIT_FILTER_TO_... constants public

85d54812

2013-08-28T16:44:04

Create public filter object and use it This creates include/sys/filter.h with a basic definition of a git_filter and then converts the internal code to use it. There are related internal objects (git_filter_list) that we will want to publish at some point, but this is a first step.

3658e81e

2013-03-25T14:20:07

Move crlf conversion into buf_text This adds crlf/lf conversion functions into buf_text with more efficient implementations that bypass the high level buffer functions. They attempt to minimize the number of reallocations done and they directly write the buffer data as needed if they know that there is enough memory allocated to memcpy data. Tests are added for these new functions. The crlf.c code is updated to use the new functions. Removed the include of buf_text.h from filter.h and just include it more narrowly in the places that need it.

359fc2d2

2013-01-08T17:07:25

update copyrights

7bf87ab6

2012-11-28T09:58:48

Consolidate text buffer functions There are many scattered functions that look into the contents of buffers to do various text manipulations (such as escaping or unescaping data, calculating text stats, guessing if content is binary, etc). This groups all those functions together into a new file and converts the code to use that. This has two enhancements to existing functionality. The old text stats function is significantly rewritten and the BOM detection code was extended (although largely we can't deal with anything other than a UTF8 BOM).

5e4cb4f4

2012-09-17T10:38:57

checkout : reduce memory usage when not filtering

3aa443a9

2012-08-20T16:56:45

checkout: introduce git_checkout_tree()

9587895f

2012-07-16T12:06:23

Migrate code to git_filter_blob_contents. Also removes the unnecessary check for filter length, since git_filters_apply does the right thing when there are none, and it's more efficient than this.

f2d42eea

2012-07-09T20:21:22

Checkout: add structure for CRLF.

e172cf08

2012-05-18T01:21:06

errors: Rename the generic return codes

f2c25d18

2012-03-02T20:08:00

config: Implement a proper cvar cache

47a899ff

2012-03-01T21:19:51

filter: Beautiful refactoring Comments soothe my soul.

c5266eba

2012-03-01T01:16:25

filter: Precache the filter config options on load

27950fa3

2012-02-29T01:26:03

filter: Add write-to CRLF filter

450b40ca

2012-02-28T01:13:32

filter: Load attributes for file

44b1ff4c

2012-02-27T04:31:05

filter: Apply filters before writing a file to the ODB Initial implementation. The relevant code is in `blob.c`: the blob write function has been split into smaller functions. - Directly write a file to the ODB in streaming mode - Directly write a symlink to the ODB in direct mode - Apply a filter, and write a file to the ODB in direct mode When trying to write a file, we first call `git_filter__load_for_file`, which populates a filters array with the required filters based on the filename. If no filters are resolved to the filename, we can write to the ODB in streaming mode straight from disk. Otherwise, we load the whole file in memory and use double-buffering to apply the filter chain. We finish by writing the file as a whole to the ODB.

thodg/libgit2/src/filter.h

src/filter.h

Log