kmx git

Commit	Date	Message
548cb334	2015-09-13T16:32:24	Don't free config in `git_transaction_commit`. The config is not owned by the transaction, so please don’t free it.
5340d63d	2015-07-12T12:50:23	config: perform unlocking via git_transaction This makes the API for commiting or discarding changes the same as for references.
36f784b5	2015-06-01T20:02:23	config: expose locking via the main API This lock/unlock pair allows for the cller to lock a configuration file to avoid concurrent operations. It also allows for a transactional approach to updating a configuration file. If multiple updates must be made atomically, they can be done while the config is locked.
b1667039	2015-06-01T19:17:03	config: implement basic transactional support When a configuration file is locked, any updates made to it will be done to the in-memory copy of the file. This allows for multiple updates to happen while we hold the lock, preventing races during complex config-file manipulation.
d6b7e404	2015-05-04T07:36:21	config: test all multivars are updated If a multivar exists within two sections (of the same name) then they should both be updated in a `set_multivar`. Ensure that this is the case.
0daf998d	2015-04-27T16:31:18	config: use wildcard in test instead of empty expr
63c0cc65	2015-04-27T16:29:00	config: cleanup some now-unused variables
5a70df94	2015-04-21T15:57:20	Test setting config var under duplicate header. Add a test that exposes a bug in config_write. It is valid to have multiple separate headers for the same config section, but config_write will exit after finding the first matching section in certain situations. This test proves that config_write will duplicate a variable that already exists instead of overwriting it if the variable is defined under a duplicate section header.
bf99390e	2015-04-23T16:54:36	config: examine whole file when writing Previously we would try to be clever when writing the configuration file and try to stop parsing (and simply copy the rest of the old file) when we either found the value we were trying to write, or when we left the section that value was in, the assumption being that there was no more work to do. Regrettably, you can have another section with the same name later in the file, and we must cope with that gracefully, thus we read the whole file in order to write a new file. Now, writing a file looks even more than reading. Pull the config parsing out into its own function that can be used by both reading and writing the configuration.
f79c7322	2015-04-23T12:00:05	config: test overwriting cvar in multiple regions
7ee61b8e	2015-04-21T17:18:21	config: ensure we can write to an empty file
6dc55872	2015-04-21T17:18:21	config: ensure we can write to an empty file
23fb4004	2015-04-21T12:49:57	config: test that we validate the key
f56a417d	2015-04-16T15:20:33	Specify mock config file content in test. Instead of using a config file in resources, include the config file content to be tested directly in the test.
a060cccc	2015-04-16T10:53:22	Unittest to validate config entry deletion bug. Add a unittest to validate bug #3043, where a duplicate empty config header could cause deletion of a config entry to fail silently. The bug is currently unresolved and this test will fail.
e009a705	2015-04-20T00:22:20	config_file: comment char can be invalid escape Don't assume that comment chars are comment chars, they may be (an attempt to be escaped). If so, \; is not a valid escape sequence, complain.
7f2e61f3	2015-04-19T23:55:02	config_file: parse multilines generously Combine unquoting and multiline detection to avoid ambiguity when parsing.
129022ee	2015-04-10T09:36:38	Fix checking of return value for regcomp. The regcomp function returns a non-zero value if compilation of a regular expression fails. In most places we only check for negative values, but positive values indicate an error, as well. Fix this tree-wide, fixing a segmentation fault when calling git_config_iterator_glob_new with an invalid regexp.
fe21d708	2015-03-04T00:29:37	Plug a few leaks
9a97f49e	2014-12-21T15:31:03	config: borrow refcounted references This changes the get_entry() method to return a refcounted version of the config entry, which you have to free when you're done. This allows us to avoid freeing the memory in which the entry is stored on a refresh, which may happen at any time for a live config. For this reason, get_string() has been forbidden on live configs and a new function get_string_buf() has been added, which stores the string in a git_buf which the user then owns. The functions which parse the string value takea advantage of the borrowing to parse safely and then release the entry.
3ea78f24	2015-02-09T19:40:22	Add test for include.path inside included config It fails at least on my computer, though it may depend on some unpredictable factors (say, will realloc() extend the memory segment in place, or it will allocate new memory).
eac773d9	2015-01-14T15:05:43	config: add parsing and getter for paths
34100846	2014-11-26T16:24:37	tests: use p_ instead of posix func directly
ebc13b2b	2014-11-02T19:16:49	Clean up issues include.path issues found during code review. * Error-handling is cleaned up to only let a file-not-found error through, not other sorts of errors. And when a file-not-found error happens, we clean up the error. * Test now checks that file-not-found introduces no error. And other minor cleanups.
727ae380	2014-11-01T11:21:45	Make config reading continue after hitting a missing include file. For example, if you have [include] path = foo and foo didn't exist, git_config_open_ondisk() would just give up on the rest of the file. Now it ignores the unresolved include without error and continues reading the rest of the file.
90aa2bf3	2014-10-25T19:51:12	config test: clean up memory leak
55cb4999	2014-10-23T19:05:02	config: remove the refresh function and backend field We have been refreshing on read and write for a while now, so git_config_refresh() is at best a no-op, and might just end up wasting cycles.
1e2fe921	2014-10-21T09:29:17	Change the length of the file so that the change is picked up.
5490c9d4	2014-10-16T13:52:55	Add a test to make sure a new snapshot has the new value.
a447a7e4	2014-10-04T23:28:40	config: Add test cases that have trailing spaces before comment chars
9dac1f95	2014-08-09T10:56:50	config: a multiline var can start immediately In the check for multiline, we traverse the backslashes from the end backwards and int the end assert that we haven't gone past the beginning of the line. We make sure of this in the loop condition, but we also check in the return value. However, for certain configurations, a line in a multiline variable might be empty to aid formatting. In that case, 'end' == 'start', since we ended up looking at the first char which made it a multiline. There is no need for the (end > start) check in the return, since the loop guarantees we won't go further back than the first char in the line, and we do accept the first char to be the final backslash. This fixes #2483.
69374869	2014-07-16T21:54:53	Add unit test to test add section without lf at EOF
228272ef	2014-05-16T11:56:37	Merge pull request #2313 from libgit2/cmn/remote-delete Remote deletion
8487e237	2014-05-15T10:56:28	Better search path sandboxing There are a number of tests that modify the global or system search paths during the tests. This adds a helper function to make it easier to restore those paths and makes sure that they are getting restored in a manner that preserves test isolation.
d2c4d1c6	2014-05-12T10:04:52	Merge pull request #2188 from libgit2/cmn/config-snapshot Configuration snapshotting
0f603132	2014-05-01T14:47:33	Improve handling of fake home directory There are a few tests that set up a fake home directory and a fake GLOBAL search path so that we can test things in global ignore or attribute or config files. This cleans up that code to work more robustly even if there is a test failure. This also fixes some valgrind warnings where scanning search paths for separators could end up doing a little bit of sketchy data access when coming to the end of search list.
48ebea66	2013-01-07T00:20:13	tests: Introduce count_config_entries_match() helper
8c1f4ab4	2014-04-09T12:26:53	config: refresh on delete When we delete an entry, we also want to refresh the configuration to catch any changes that happened externally. This allows us to simplify the logic, as we no longer need to delete these variables internally. The whole state will be refreshed and the deleted entries won't be there.
523032cd	2014-03-31T09:58:44	config: refresh before reading a value With the isolation of complex reads, we can now try to refresh the on-disk file before reading a value from it. This changes the semantics a bit, as before we could be sure that a string we got from the configuration was valid until we wrote or refreshed. This is no longer the case, as a read can also invalidate the pointer.
eaf37034	2014-03-31T08:53:56	config: refresh the values on write When writing out, parse the resulting file instead of adding or replacing the value locally. This has the effect of reading external changes as well.
55ebd7d3	2014-03-13T17:11:34	config: implement config snapshotting In order to have consistent views of the config files for remotes, submodules et al. and a configuration that represents what is currently stored on-disk, we need a way to provide a view of the configuration that does not change. The goal here is to provide the snapshotting part by creating a read-only copy of the state of the configuration at a particular point in time, which does not change when a repository's main config changes.
36913b8c	2014-03-06T15:11:11	config: document current write behaviour in a test On set, we set/add the value written to the config's internal values, but we do not refresh old values. Document this in a test in preparation for the refresh changes.
25e0b157	2013-12-06T15:07:57	Remove converting user error to GIT_EUSER This changes the behavior of callbacks so that the callback error code is not converted into GIT_EUSER and instead we propagate the return value through to the caller. Instead of using the giterr_capture and giterr_restore functions, we now rely on all functions to pass back the return value from a callback. To avoid having a return value with no error message, the user can call the public giterr_set_str or some such function to set an error message. There is a new helper 'giterr_set_callback' that functions can invoke after making a callback which ensures that some error message was set in case the callback did not set one. In places where the sign of the callback return value is meaningful (e.g. positive to skip, negative to abort), only the negative values are returned back to the caller, obviously, since the other values allow for continuing the loop. The hardest parts of this were in the checkout code where positive return values were overloaded as meaningful values for checkout. I fixed this by adding an output parameter to many of the internal checkout functions and removing the overload. This added some code, but it is probably a better implementation. There is some funkiness in the network code where user provided callbacks could be returning a positive or a negative value and we want to rely on that to cancel the loop. There are still a couple places where an user error might get turned into GIT_EUSER there, I think, though none exercised by the tests.
96869a4e	2013-12-03T16:45:39	Improve GIT_EUSER handling This adds giterr_user_cancel to return GIT_EUSER and clear any error message that is sitting around. As a result of using that in places, we need to be more thorough with capturing errors that happen inside a callback when used internally. To help with that, this also adds giterr_capture and giterr_restore so that when we internally use a foreach-type function that clears errors and converts them to GIT_EUSER, it is easier to restore not just the return value, but the actual error message text.
17820381	2013-11-14T14:05:52	Rename tests-clar to tests

548cb334

2015-09-13T16:32:24

Don't free config in `git_transaction_commit`. The config is not owned by the transaction, so please don’t free it.

5340d63d

2015-07-12T12:50:23

config: perform unlocking via git_transaction This makes the API for commiting or discarding changes the same as for references.

36f784b5

2015-06-01T20:02:23

config: expose locking via the main API This lock/unlock pair allows for the cller to lock a configuration file to avoid concurrent operations. It also allows for a transactional approach to updating a configuration file. If multiple updates must be made atomically, they can be done while the config is locked.

b1667039

2015-06-01T19:17:03

config: implement basic transactional support When a configuration file is locked, any updates made to it will be done to the in-memory copy of the file. This allows for multiple updates to happen while we hold the lock, preventing races during complex config-file manipulation.

d6b7e404

2015-05-04T07:36:21

config: test all multivars are updated If a multivar exists within two sections (of the same name) then they should both be updated in a `set_multivar`. Ensure that this is the case.

0daf998d

2015-04-27T16:31:18

config: use wildcard in test instead of empty expr

63c0cc65

2015-04-27T16:29:00

config: cleanup some now-unused variables

5a70df94

2015-04-21T15:57:20

Test setting config var under duplicate header. Add a test that exposes a bug in config_write. It is valid to have multiple separate headers for the same config section, but config_write will exit after finding the first matching section in certain situations. This test proves that config_write will duplicate a variable that already exists instead of overwriting it if the variable is defined under a duplicate section header.

bf99390e

2015-04-23T16:54:36

config: examine whole file when writing Previously we would try to be clever when writing the configuration file and try to stop parsing (and simply copy the rest of the old file) when we either found the value we were trying to write, or when we left the section that value was in, the assumption being that there was no more work to do. Regrettably, you can have another section with the same name later in the file, and we must cope with that gracefully, thus we read the whole file in order to write a new file. Now, writing a file looks even more than reading. Pull the config parsing out into its own function that can be used by both reading and writing the configuration.

f79c7322

2015-04-23T12:00:05

config: test overwriting cvar in multiple regions

7ee61b8e

2015-04-21T17:18:21

config: ensure we can write to an empty file

6dc55872

2015-04-21T17:18:21

config: ensure we can write to an empty file

23fb4004

2015-04-21T12:49:57

config: test that we validate the key

f56a417d

2015-04-16T15:20:33

Specify mock config file content in test. Instead of using a config file in resources, include the config file content to be tested directly in the test.

a060cccc

2015-04-16T10:53:22

Unittest to validate config entry deletion bug. Add a unittest to validate bug #3043, where a duplicate empty config header could cause deletion of a config entry to fail silently. The bug is currently unresolved and this test will fail.

e009a705

2015-04-20T00:22:20

config_file: comment char can be invalid escape Don't assume that comment chars are comment chars, they may be (an attempt to be escaped). If so, \; is not a valid escape sequence, complain.

7f2e61f3

2015-04-19T23:55:02

config_file: parse multilines generously Combine unquoting and multiline detection to avoid ambiguity when parsing.

129022ee

2015-04-10T09:36:38

Fix checking of return value for regcomp. The regcomp function returns a non-zero value if compilation of a regular expression fails. In most places we only check for negative values, but positive values indicate an error, as well. Fix this tree-wide, fixing a segmentation fault when calling git_config_iterator_glob_new with an invalid regexp.

fe21d708

2015-03-04T00:29:37

Plug a few leaks

9a97f49e

2014-12-21T15:31:03

config: borrow refcounted references This changes the get_entry() method to return a refcounted version of the config entry, which you have to free when you're done. This allows us to avoid freeing the memory in which the entry is stored on a refresh, which may happen at any time for a live config. For this reason, get_string() has been forbidden on live configs and a new function get_string_buf() has been added, which stores the string in a git_buf which the user then owns. The functions which parse the string value takea advantage of the borrowing to parse safely and then release the entry.

3ea78f24

2015-02-09T19:40:22

Add test for include.path inside included config It fails at least on my computer, though it may depend on some unpredictable factors (say, will realloc() extend the memory segment in place, or it will allocate new memory).

eac773d9

2015-01-14T15:05:43

config: add parsing and getter for paths

34100846

2014-11-26T16:24:37

tests: use p_ instead of posix func directly

ebc13b2b

2014-11-02T19:16:49

Clean up issues include.path issues found during code review. * Error-handling is cleaned up to only let a file-not-found error through, not other sorts of errors. And when a file-not-found error happens, we clean up the error. * Test now checks that file-not-found introduces no error. And other minor cleanups.

727ae380

2014-11-01T11:21:45

Make config reading continue after hitting a missing include file. For example, if you have [include] path = foo and foo didn't exist, git_config_open_ondisk() would just give up on the rest of the file. Now it ignores the unresolved include without error and continues reading the rest of the file.

90aa2bf3

2014-10-25T19:51:12

config test: clean up memory leak

55cb4999

2014-10-23T19:05:02

config: remove the refresh function and backend field We have been refreshing on read and write for a while now, so git_config_refresh() is at best a no-op, and might just end up wasting cycles.

1e2fe921

2014-10-21T09:29:17

Change the length of the file so that the change is picked up.

5490c9d4

2014-10-16T13:52:55

Add a test to make sure a new snapshot has the new value.

a447a7e4

2014-10-04T23:28:40

config: Add test cases that have trailing spaces before comment chars

9dac1f95

2014-08-09T10:56:50

config: a multiline var can start immediately In the check for multiline, we traverse the backslashes from the end backwards and int the end assert that we haven't gone past the beginning of the line. We make sure of this in the loop condition, but we also check in the return value. However, for certain configurations, a line in a multiline variable might be empty to aid formatting. In that case, 'end' == 'start', since we ended up looking at the first char which made it a multiline. There is no need for the (end > start) check in the return, since the loop guarantees we won't go further back than the first char in the line, and we do accept the first char to be the final backslash. This fixes #2483.

69374869

2014-07-16T21:54:53

Add unit test to test add section without lf at EOF

228272ef

2014-05-16T11:56:37

Merge pull request #2313 from libgit2/cmn/remote-delete Remote deletion

8487e237

2014-05-15T10:56:28

Better search path sandboxing There are a number of tests that modify the global or system search paths during the tests. This adds a helper function to make it easier to restore those paths and makes sure that they are getting restored in a manner that preserves test isolation.

d2c4d1c6

2014-05-12T10:04:52

Merge pull request #2188 from libgit2/cmn/config-snapshot Configuration snapshotting

0f603132

2014-05-01T14:47:33

Improve handling of fake home directory There are a few tests that set up a fake home directory and a fake GLOBAL search path so that we can test things in global ignore or attribute or config files. This cleans up that code to work more robustly even if there is a test failure. This also fixes some valgrind warnings where scanning search paths for separators could end up doing a little bit of sketchy data access when coming to the end of search list.

48ebea66

2013-01-07T00:20:13

tests: Introduce count_config_entries_match() helper

8c1f4ab4

2014-04-09T12:26:53

config: refresh on delete When we delete an entry, we also want to refresh the configuration to catch any changes that happened externally. This allows us to simplify the logic, as we no longer need to delete these variables internally. The whole state will be refreshed and the deleted entries won't be there.

523032cd

2014-03-31T09:58:44

config: refresh before reading a value With the isolation of complex reads, we can now try to refresh the on-disk file before reading a value from it. This changes the semantics a bit, as before we could be sure that a string we got from the configuration was valid until we wrote or refreshed. This is no longer the case, as a read can also invalidate the pointer.

eaf37034

2014-03-31T08:53:56

config: refresh the values on write When writing out, parse the resulting file instead of adding or replacing the value locally. This has the effect of reading external changes as well.

55ebd7d3

2014-03-13T17:11:34

config: implement config snapshotting In order to have consistent views of the config files for remotes, submodules et al. and a configuration that represents what is currently stored on-disk, we need a way to provide a view of the configuration that does not change. The goal here is to provide the snapshotting part by creating a read-only copy of the state of the configuration at a particular point in time, which does not change when a repository's main config changes.

36913b8c

2014-03-06T15:11:11

config: document current write behaviour in a test On set, we set/add the value written to the config's internal values, but we do not refresh old values. Document this in a test in preparation for the refresh changes.

25e0b157

2013-12-06T15:07:57

Remove converting user error to GIT_EUSER This changes the behavior of callbacks so that the callback error code is not converted into GIT_EUSER and instead we propagate the return value through to the caller. Instead of using the giterr_capture and giterr_restore functions, we now rely on all functions to pass back the return value from a callback. To avoid having a return value with no error message, the user can call the public giterr_set_str or some such function to set an error message. There is a new helper 'giterr_set_callback' that functions can invoke after making a callback which ensures that some error message was set in case the callback did not set one. In places where the sign of the callback return value is meaningful (e.g. positive to skip, negative to abort), only the negative values are returned back to the caller, obviously, since the other values allow for continuing the loop. The hardest parts of this were in the checkout code where positive return values were overloaded as meaningful values for checkout. I fixed this by adding an output parameter to many of the internal checkout functions and removing the overload. This added some code, but it is probably a better implementation. There is some funkiness in the network code where user provided callbacks could be returning a positive or a negative value and we want to rely on that to cancel the loop. There are still a couple places where an user error might get turned into GIT_EUSER there, I think, though none exercised by the tests.

96869a4e

2013-12-03T16:45:39

Improve GIT_EUSER handling This adds giterr_user_cancel to return GIT_EUSER and clear any error message that is sitting around. As a result of using that in places, we need to be more thorough with capturing errors that happen inside a callback when used internally. To help with that, this also adds giterr_capture and giterr_restore so that when we internally use a foreach-type function that clears errors and converts them to GIT_EUSER, it is easier to restore not just the return value, but the actual error message text.

17820381

2013-11-14T14:05:52

Rename tests-clar to tests

thodg/libgit2/tests/config

tests/config

Log