|
f673e232
|
2018-12-27T13:47:34
|
|
git_error: use new names in internal APIs and usage
Move to the `git_error` name in the internal API for error-related
functions.
|
|
|
ed8cfbf0
|
2019-01-17T00:32:31
|
|
references: use new names in internal usage
Update internal usage to use the `git_reference` names for constants.
|
|
8dde7e11
|
2018-12-19T11:04:58
|
|
refdb_fs: refactor error handling in `refdb_reflog_fs__delete`
The function `refdb_reflog_fs__delete` uses the `if (!error && foobar())`
pattern of checking, where error conditions are being checked by following calls
to different code. This does not match our current style, where the call-site of
a function is usually directly responsible for checking the return value.
Convert the function to use `if ((error = foobar()) < 0) goto out;` style. Note
that this changes the code flow a bit: previously, we were always trying to
delete empty reference hierarchies even if deleting the reflog entry has failed.
This wasn't much of a problem -- if deletion failed, the hierarchy will still
contain at least one file and thus the function call was an expensive no-op.
Now, we will only perform this deletion if we have successfully removed the
reflog.
|
|
|
bc219657
|
2018-12-19T11:01:55
|
|
Merge pull request #4833 from csware/drop-empty-dirs
Remove empty (sub-)directories when deleting refs
|
|
|
168fe39b
|
2018-11-28T14:26:57
|
|
object_type: use new enumeration names
Use the new object_type enumeration names within the codebase.
|
|
e226ad8f
|
2018-11-17T17:55:10
|
|
refs: add support for core.logAllRefUpdates=always
Since we were not expecting this config entry to contain a string, we
would fail as soon as its (cached) value would be accessed. Hence,
provide some constants for the 4 states we use, and account for "always"
when we decide to reflog changes.
|
|
9f48dc3b
|
2018-10-05T12:47:32
|
|
Remove empty directories when deleting refs
Signed-off-by: Sven Strickroth <email@cs-ware.de>
|
|
|
ecf4f33a
|
2018-02-08T11:14:48
|
|
Convert usage of `git_buf_free` to new `git_buf_dispose`
|
|
05e891f1
|
2018-06-01T08:44:30
|
|
refdb_fs: test whether the base directory exists when globbing
This commit fixes a regression introduced by
20a2b02d9a1bcb4825ec49605146223c565dcacf
The commit introduced an optimization for finding references using a
glob: rather than iterating over all references and matching each one
against the glob, we would iterate only over references within the
directory common to all possible references which may match against the
glob.
However, contrary to the `ref/` directory, which was the previous entry
point for the iteration, this directory may not exist. In this case, the
optimization causes an error (`ENOENT`) rather than the iterator simply
yielding no references.
This patch fixes the regression by checkign for this specific case.
|
|
7f6c1ce9
|
2018-05-29T21:04:39
|
|
Merge pull request #4660 from libgit2/cmn/submodule-traversal
Fixes for CVE 2018-11235
|
|
a7168b47
|
2018-05-22T16:13:47
|
|
path: reject .gitmodules as a symlink
Any part of the library which asks the question can pass in the mode to have it
checked against `.gitmodules` being a symlink.
This is particularly relevant for adding entries to the index from the worktree
and for checking out files.
|
|
|
0a19c151
|
2018-05-09T14:14:06
|
|
Merge pull request #4629 from neithernut/enhance-glob-perf
refdb_fs: enhance performance of globbing
|
|
|
20a2b02d
|
2018-04-18T19:23:40
|
|
refdb_fs: enable root arbitration for fixed portion of globs
A glob used for iteration may start with an entire path containing no
special characters. If we start scanning for references within that path
rather than in `refs/`, we may end up scanning only a small fraction of
all references.
|
|
|
27e98cf7
|
2018-04-18T19:21:22
|
|
refdb_fs: prepare arbitration of the root used for ref iteration
Instead of a hardcoded "refs", we may choose a different directory
within the git directory as the root from which we look for references.
|
|
|
5ace1494
|
2018-04-26T11:45:38
|
|
Merge pull request #4633 from csware/worktree-delereref
Fix deletion of unrelated branch on worktree
|
|
|
fd7b5bc3
|
2018-04-20T12:54:41
|
|
Fix deletion of unrelated branch on worktree
Signed-off-by: Sven Strickroth <email@cs-ware.de>
|
|
|
eb0a3afd
|
2018-03-11T15:35:56
|
|
worktree: Read worktree specific reflog for HEAD
Signed-off-by: Sven Strickroth <email@cs-ware.de>
|
|
|
9e94b6af
|
2017-12-30T00:12:46
|
|
iterator: cleanups with symlink dir handling
Perform some error checking when examining symlink directories.
|
|
e9628e7b
|
2017-10-30T11:38:33
|
|
branches: Check symlinked subdirectories
Native Git allows symlinked directories under .git/refs. This
change allows libgit2 to also look for references that live under
symlinked directories.
Signed-off-by: Andy Doan <andy@opensourcefoundries.com>
|
|
|
0c7f49dd
|
2017-06-30T13:39:01
|
|
Make sure to always include "common.h" first
Next to including several files, our "common.h" header also declares
various macros which are then used throughout the project. As such, we
have to make sure to always include this file first in all
implementation files. Otherwise, we might encounter problems or even
silent behavioural differences due to macros or defines not being
defined as they should be. So in fact, our header and implementation
files should make sure to always include "common.h" first.
This commit does so by establishing a common include pattern. Header
files inside of "src" will now always include "common.h" as its first
other file, separated by a newline from all the other includes to make
it stand out as special. There are two cases for the implementation
files. If they do have a matching header file, they will always include
this one first, leading to "common.h" being transitively included as
first file. If they do not have a matching header file, they instead
include "common.h" as first file themselves.
This fixes the outlined problems and will become our standard practice
for header and source files inside of the "src/" from now on.
|
|
|
6c23704d
|
2017-06-08T21:40:18
|
|
settings: rename `GIT_OPT_ENABLE_SYNCHRONOUS_OBJECT_CREATION`
Initially, the setting has been solely used to enable the use of
`fsync()` when creating objects. Since then, the use has been extended
to also cover references and index files. As the option is not yet part
of any release, we can still correct this by renaming the option to
something more sensible, indicating not only correlation to objects.
This commit renames the option to `GIT_OPT_ENABLE_FSYNC_GITDIR`. We also
move the variable from the object to repository source code.
|
|
|
90388aa8
|
2017-06-06T15:02:23
|
|
refdb_fs: be explicit about using null-OID if we cannot resolve ref
|
|
|
f623cf89
|
2017-03-22T20:32:55
|
|
Merge pull request #4163 from pks-t/pks/submodules-with-worktrees
Worktree fixes
|
|
|
6fd6c678
|
2017-03-22T20:29:22
|
|
Merge pull request #4030 from libgit2/ethomson/fsync
fsync all the things
|
|
|
097f0105
|
2017-03-17T08:54:53
|
|
refdb: create references in commondir
References for a repository are usually created inside of its gitdir.
When using worktrees, though, these references are not to be created
inside the worktree gitdir, but instead inside the gitdir of its parent
repository, which is the commondir. Like this, branches will still be
available after the worktree itself has been deleted.
The filesystem refdb currently still creates new references inside of
the gitdir. Fix this and have it create references in commondir.
|
|
83580562
|
2017-03-06T13:14:47
|
|
refdb_fs: honor the namespace
|
|
|
1c04a96b
|
2017-02-28T12:29:29
|
|
Honor `core.fsyncObjectFiles`
|
|
|
2a5ad7d0
|
2017-02-17T16:42:40
|
|
fsync: call it "synchronous" object writing
Rename `GIT_OPT_ENABLE_SYNCHRONIZED_OBJECT_CREATION` ->
`GIT_OPT_ENABLE_SYNCHRONOUS_OBJECT_CREATION`.
|
|
|
eb56ed81
|
2016-12-15T14:49:43
|
|
refdb_fs: optionally fsync packed refs
|
|
|
af3dcb0e
|
2016-12-15T10:56:52
|
|
refdb_fs: optionally fsync loose references
|
|
|
13c3bc9a
|
2017-01-27T14:32:23
|
|
strmap: remove GIT__USE_STRMAP macro
|
|
|
6da6b425
|
2017-02-14T11:13:32
|
|
refdb: catch additional per-worktree refs
The upstream git.git project currently identifies all references inside
of `refs/bisect/` as well as `HEAD` as per-worktree references. This is
already incorrect and is currently being fixed by an in-flight topic
[1]. The new behavior will be to match all pseudo-references outside of
the `refs/` hierarchy as well as `refs/bisect/`.
Our current behavior is to mark a selection of pseudo-references as
per-worktree, only. This matches more pseudo-references than current
git, but forgets about `refs/bisect/`. Adjust behavior to match the
in-flight topic, that is classify the following references as
per-worktree:
- everything outside of `refs/`
- everything inside of `refs/bisect/`
[1]: <20170213152011.12050-1-pclouds@gmail.com>
|
|
|
84f56cb0
|
2016-11-04T11:59:52
|
|
repository: rename `path_repository` and `path_gitlink`
The `path_repository` variable is actually confusing to think
about, as it is not always clear what the repository actually is.
It may either be the path to the folder containing worktree and
.git directory, the path to .git itself, a worktree or something
entirely different. Actually, the intent of the variable is to
hold the path to the gitdir, which is either the .git directory
or the bare repository.
Rename the variable to `gitdir` to avoid confusion. While at it,
also rename `path_gitlink` to `gitlink` to improve consistency.
|
|
|
e9403024
|
2015-09-24T15:32:26
|
|
refdb: look for reflog in commondir
|
|
|
e0a6c28e
|
2015-09-16T16:09:24
|
|
refdb: introduce commondir awareness
The refdb_fs_backend is not aware of the git commondir, which
stores common objects like the o bject database and packed/loose
refereensces when worktrees are used.
Make refdb_fs_backend aware of the common directory by
introducing a new commonpath variable that points to the actual
common path of the database and using it instead of the gitdir
for the mentioned objects.
|
|
|
71dd0861
|
2015-09-17T11:40:55
|
|
refdb: rename refdb_fs_backend's .path to .gitpath
The variable '.path' of the refdb_fs_backend struct becomes
confusing regarding the introduction of the git commondir. It
does not immediatly become obvious what it should point to.
Fix this problem by renaming the variable to `gitpath`,
clarifying that it acutally points to the `.git` directory of the
repository, in contrast to the commonpath directory, which points
to the directory containing shared objects like references and
the object store.
|
|
|
909d5494
|
2016-12-29T12:25:15
|
|
giterr_set: consistent error messages
Error messages should be sentence fragments, and therefore:
1. Should not begin with a capital letter,
2. Should not conclude with punctuation, and
3. Should not end a sentence and begin a new one
|
|
|
6ab65b80
|
2016-12-11T17:56:38
|
|
refdb: bubble up recursive rm when locking a ref
Failure to bubble up this error means some locking errors do not get reported as
such on Windows.
|
|
|
21e0fc32
|
2016-11-14T17:55:49
|
|
Plug a leak in the refs compressor
|
|
|
ce5553d4
|
2016-03-10T22:01:09
|
|
refdb: bubble up locked files on the read side
On Windows we can find locked files even when reading a reference or the
packed-refs file. Bubble up the error in this case as well to allow
callers on Windows to retry more intelligently.
|
|
|
33248b9e
|
2016-03-10T12:22:34
|
|
refdb: remove a check-delete race when removing a loose ref
It does not help us to check whether the file exists before trying to
unlink it since it might be gone by the time unlink is called.
Instead try to remove it and handle the resulting error if it did not
exist.
|
|
|
2e09106e
|
2015-12-24T17:49:49
|
|
refdb: bubble up the error code when compressing the db
This allows the caller to know the errors was e.g. due to the
packed-refs file being already locked and they can try again later.
|
|
|
dd1ca6f1
|
2015-12-24T17:38:41
|
|
refdb: refactor the lockfile cleanup
We can reduce the duplication by cleaning up at the beginning of the
loop, since it's something we want to do every time we continue.
|
|
|
7ea4710a
|
2015-12-24T17:30:24
|
|
refdb: don't report failure for expected errors
There might be a few threads or processes working with references
concurrently, so fortify the code to ignore errors which come from
concurrent access which do not stop us from continuing the work.
This includes ignoring an unlinking error. Either someone else removed
it or we leave the file around. In the former case the job is done, and
in the latter case, the ref is still in a valid state.
|
|
|
2d9aec99
|
2015-12-24T14:01:38
|
|
refdb: make ref deletion after pack safer
In order not to undo concurrent modifications to references, we must
make sure that we only delete a loose reference if it still has the same
value as when we packed it.
This means we need to lock it and then compare the value with the one we
put in the packed file.
|
|
|
9914efec
|
2015-12-24T14:00:48
|
|
refdb: bubble up errors
We can get useful information like GIT_ELOCKED out of this instead of
just -1.
|
|
|
b27ccad2
|
2016-03-10T16:11:51
|
|
refdb_fs: fail if refcache returns NULL pointer
We usually check entries returned by `git_sortedcache_entry` for
NULL pointers. As we have a write lock in `packed_write`, though,
it really should not happen that the function returns NULL.
Assert that ref is not NULL to silence a Coverity warning.
|
|
|
793e0855
|
2016-02-22T14:06:48
|
|
refdb_fs: remove unnecessary check for NULL
The fail-label of `reflog_parse` explicitly checks the entry
poitner for NULL before freeing it. When we jump to the label the
variable has to be set to a non-NULL and valid pointer though: if
the allocation fails we immediately return with an error code and
if the loop was not entered we return with a success code,
withouth executing the label's code.
Remove the useless NULL-check to silence Coverity.
|
|
|
318b825e
|
2016-02-16T17:11:46
|
|
index: allow read of index w/ illegal entries
Allow `git_index_read` to handle reading existing indexes with
illegal entries. Allow the low-level `git_index_add` to add
properly formed `git_index_entry`s even if they contain paths
that would be illegal for the current filesystem (eg, `AUX`).
Continue to disallow `git_index_add_bypath` from adding entries
that are illegal universally illegal (eg, `.git`, `foo/../bar`).
|
|
0a700ee3
|
2015-11-03T17:34:54
|
|
reflog: error when a directory is at reflog path
When a non-empty directory exists and prevents the creation of a
reflog, provide a more informative error message.
|
|
|
b46c7ee5
|
2015-11-03T17:18:00
|
|
refs: complain when a directory exists at ref
When a (non-empty) directory exists at the reference target
location, complain with a more actionable error message.
|
|
|
fd74bd08
|
2015-10-29T20:37:48
|
|
Merge pull request #3486 from srajko/reflog-segfault-fix
Fix segfault when reading reflog with extra newlines
|
|
335c9e2f
|
2015-10-26T15:33:00
|
|
Prevent segfault when parsing a reflog with oid parse error
Using calloc instead of malloc because the parse error will lead to an immediate free of committer (and its properties, which can segfault on free if undefined - test_refs_reflog_reflog__reading_a_reflog_with_invalid_format_returns_error segfaulted before the fix).
#3458
|
|
1e5e02b4
|
2015-10-27T17:26:04
|
|
pool: Simplify implementation
|
|
|
ac2fba0e
|
2015-09-16T15:07:27
|
|
git_futils_mkdir_*: make a relative-to-base mkdir
Untangle git_futils_mkdir from git_futils_mkdir_ext - the latter
assumes that we own everything beneath the base, as if it were
being called with a base of the repository or working directory,
and is tailored towards checkout and ensuring that there is no
bogosity beneath the base that must be cleaned up.
This is (at best) slow and (at worst) unsafe in the larger context
of a filesystem where we do not own things and cannot do things like
unlink symlinks that are in our way.
|
|
|
ed1c6446
|
2015-07-28T11:41:27
|
|
iterator: use an options struct instead of args
|
|
|
01d0c02d
|
2015-07-12T19:08:06
|
|
refdb: delete a ref's reflog upon deletion
Removing a reflog upon ref deletion is something which only some
backends might wish to do. Backends which are database-backed may wish
to archive a reflog, log-based ones may not need to do anything.
|
|
|
d578b45f
|
2015-03-08T16:46:33
|
|
refdb: use the same id for old and new when renaming a reference
When we rename a reference, we want the old and new ids to be the same
one (as we did not change it). The normal code path looks up the old id
from the current value of the brtanch, but by the time we look it up, it
does not exist anymore and thus we write a zero id.
Pass the old id explicitly instead.
|
|
c8e02b87
|
2015-02-15T21:07:05
|
|
Remove extra semicolon outside of a function
Without this change, compiling with gcc and pedantic generates warning:
ISO C does not allow extra ‘;’ outside of a function.
|
|
1589a93a
|
2015-02-02T16:50:10
|
|
Fix branch creation when branch name matches namespace of previously deleted branch
|
|
|
ee5da720
|
2014-12-02T22:20:42
|
|
reference_create: validate loose names
Validate loose reference names on Win32.
|
|
|
a64119e3
|
2014-11-25T18:13:00
|
|
checkout: disallow bad paths on win32
Disallow:
1. paths with trailing dot
2. paths with trailing space
3. paths with trailing colon
4. paths that are 8.3 short names of .git folders ("GIT~1")
5. paths that are reserved path names (COM1, LPT1, etc).
6. paths with reserved DOS characters (colons, asterisks, etc)
These paths would (without \\?\ syntax) be elided to other paths - for
example, ".git." would be written as ".git". As a result, writing these
paths literally (using \\?\ syntax) makes them hard to operate with from
the shell, Windows Explorer or other tools. Disallow these.
|
|
|
ab8d9242
|
2014-06-28T06:39:38
|
|
Introduce reference transactions
A transaction allows you to lock multiple references and set up changes
for them before applying the changes all at once (or as close as the
backend supports).
This can be used for replication purposes, or for making sure some
operations run when the reference is locked and thus cannot be changed.
|
|
|
2d945f82
|
2014-06-02T17:44:51
|
|
refs: copy the packed refs on iteration
This lets us work without worrying about what's happening but work on a
snapshot.
|
|
2b52a0bf
|
2014-05-13T16:32:27
|
|
Increase use of config snapshots
And decrease extra reload checks of config data.
|
|
|
4f9d5414
|
2014-04-26T14:29:18
|
|
refdb: fix typo and wording
|
|
|
18234b14
|
2014-02-21T09:14:16
|
|
Add efficient git_buf join3 API
There are a few places where we need to join three strings to
assemble a path. This adds a simple join3 function to avoid the
comparatively expensive join_n (which calls strlen on each string
twice).
|
|
|
1c351659
|
2014-03-20T09:55:47
|
|
reflog: remove some dead code
|
|
|
83504371
|
2014-03-19T22:27:23
|
|
reflog: follow core.logallrefupdates
On bare by default, or when core.logallrefupdates is false, we must not
write the reflog.
|
|
|
99797c96
|
2014-03-19T18:14:35
|
|
reflog: handle symref chains
Given HEAD -> master -> foo, when updating foo's reflog we should also
update HEAD's, as it's considered the current branch.
|
|
|
6aaae94a
|
2014-03-19T16:30:37
|
|
reflog: handle the birth of a branch
The reflog append function was overzealous in its checking. When passed
an old and new ids, it should not do any checking, but just serialize
the data to a reflog entry.
|
|
|
afc57eb4
|
2014-03-19T06:59:09
|
|
reflog: simplify the append logic
Remove some duplicated logic.
|
|
|
1afe1400
|
2014-03-18T22:16:58
|
|
refdb: don't update when there's no need
If the caller wants to update a ref to point to the same target as it
currently has, we should return early and avoid writing to the reflog.
|
|
|
bac95e6e
|
2014-03-18T19:41:03
|
|
reflog: more comprehensive HEAD tests
The existing ones lack checking zeroed ids when switching back from an
unborn branch as well as what happens when detaching.
The reflog appending function mistakenly wrote zeros when dealing with a
detached HEAD. This explicitly checks for those situations and fixes
them.
|
|
|
4b7e1b9e
|
2014-01-15T13:19:48
|
|
refs: append to the HEAD reflog when updating the current branch
When we update the current branch, we must also append to HEAD's reflog
to keep them in sync.
This is a bit of a hack, but as git.git says, it covers 100% of
default cases.
|
|
|
ae32c54e
|
2014-03-05T20:28:49
|
|
Plug a few leaks in the tests
|
|
|
a213a7bf
|
2014-03-05T20:32:53
|
|
refdb: catch a directory disappearing
If a directory disappears between the time we look up the entries of its
parent and the time when we go to look at it, we should ignore the error
and move forward.
This fixes #2046.
|
|
|
77ad6754
|
2014-02-10T14:38:01
|
|
refs: conditional wording fixups
This addresses arrbee's concerns about wording in the conditional
reference udpate functions.
|
|
|
b7ae71ec
|
2014-02-05T11:47:33
|
|
refs: catch cases where the ref type has changed
If the type of the on-disk reference has changed, the old value
comparison should fail.
|
|
|
7ee8c7e6
|
2014-02-05T11:07:34
|
|
refs: placeholder conditional delete
We don't actually pass the old value yet.
|
|
|
f8621dde
|
2014-02-05T10:42:42
|
|
refs: factor out old value comparison
We will reuse this later for deletion.
|
|
|
91123661
|
2014-02-04T22:04:00
|
|
refdb: add conditional symbolic updates
Add a parameter to the backend to allow checking for the old symbolic
target.
|
|
|
1202c7ea
|
2014-02-04T21:35:44
|
|
refs: fix leak on successful update
Free the old ref even on success.
|
|
|
fc4728e3
|
2014-01-29T14:07:18
|
|
refs: return GIT_EMODIFIED if the ref target moved
In case we loose the race to update the reference, return GIT_EMODIFIED
to let the user distinguish it from other types of errors.
|
|
|
9b148098
|
2013-12-18T19:58:16
|
|
refs: conditional ref updates
Allow updating references if the old value matches the given one.
|
|
7f058b86
|
2014-02-01T19:29:48
|
|
Check for errors when dereferencing symbolic refs
|
|
|
ee8e6afd
|
2014-02-01T11:46:44
|
|
Reflog: correct "new" id for reattaching HEAD
|
|
|
6357388e
|
2014-01-27T13:24:10
|
|
Enhance clarity
|
|
|
a2311f92
|
2014-01-27T13:12:31
|
|
Ensure updating HEAD updates reflog
|
|
4e1f517c
|
2013-12-18T09:33:45
|
|
Merge pull request #1920 from libgit2/cmn/ref-with-log
Reference operations with log
|
|
|
25e0b157
|
2013-12-06T15:07:57
|
|
Remove converting user error to GIT_EUSER
This changes the behavior of callbacks so that the callback error
code is not converted into GIT_EUSER and instead we propagate the
return value through to the caller. Instead of using the
giterr_capture and giterr_restore functions, we now rely on all
functions to pass back the return value from a callback.
To avoid having a return value with no error message, the user
can call the public giterr_set_str or some such function to set
an error message. There is a new helper 'giterr_set_callback'
that functions can invoke after making a callback which ensures
that some error message was set in case the callback did not set
one.
In places where the sign of the callback return value is
meaningful (e.g. positive to skip, negative to abort), only the
negative values are returned back to the caller, obviously, since
the other values allow for continuing the loop.
The hardest parts of this were in the checkout code where positive
return values were overloaded as meaningful values for checkout.
I fixed this by adding an output parameter to many of the internal
checkout functions and removing the overload. This added some
code, but it is probably a better implementation.
There is some funkiness in the network code where user provided
callbacks could be returning a positive or a negative value and
we want to rely on that to cancel the loop. There are still a
couple places where an user error might get turned into GIT_EUSER
there, I think, though none exercised by the tests.
|
|
|
96869a4e
|
2013-12-03T16:45:39
|
|
Improve GIT_EUSER handling
This adds giterr_user_cancel to return GIT_EUSER and clear any
error message that is sitting around. As a result of using that
in places, we need to be more thorough with capturing errors that
happen inside a callback when used internally. To help with that,
this also adds giterr_capture and giterr_restore so that when we
internally use a foreach-type function that clears errors and
converts them to GIT_EUSER, it is easier to restore not just the
return value, but the actual error message text.
|
|
|
f2105129
|
2013-11-23T14:39:53
|
|
refs: expose has_log() on the backend
The frontend used to look at the file directly, but that's obviously not
the right thing to do. Expose it on the backend and use that function
instead.
|
|
|
8d5ec910
|
2013-11-23T14:13:01
|
|
refs: expose a way to ensure a ref has a log
Sometimes (e.g. stash) we want to make sure that a log will be written,
even if it's not in one of the standard locations. Let's make that
easier.
|
|
|
6f13a305
|
2013-11-17T23:26:49
|
|
reflog: write to the reflog following git's rules
git-core only writes to the reflogs of HEAD, refs/heads/ and,
refs/notes/ or if there is already a reflog in place. Adjust our code to
follow these semantics.
|
|
|
a57dd3b7
|
2013-11-13T18:15:20
|
|
reflog: integrate into the ref writing
Whenever a reference is created or updated, we need to write to the
reflog regardless of whether the user gave us a message, so we shouldn't
leave that to the ref frontend, but integrate it into the backend.
This also eliminates the race between ref update and writing to the
reflog, as we protect the reflog with the ref lock.
As an additional benefit, this reflog append on the backend happens by
appending to the file instead of parsing and rewriting it.
|
|
|
110df893
|
2013-11-13T13:36:37
|
|
refdb: add a `message` parameter for appending to the log
This is as yet unused.
|
|
|
1d3a8aeb
|
2013-11-04T18:28:57
|
|
move mode_t to filebuf_open instead of _commit
|
|
|
8f4a8b09
|
2013-10-28T06:20:28
|
|
Merge pull request #1802 from libgit2/cmn/reflog-backend
Make reflog part of refdb
|
|
|
219d3457
|
2013-10-01T16:12:15
|
|
Initial iconv hookup for precomposed unicode
This hooks up git_path_direach and git_path_dirload so that they
will take a flag indicating if directory entry names should be
tested and converted from decomposed unicode to precomposed form.
This code will only come into play on the Apple platform and even
then, only when certain types of filesystems are used.
This involved adding a flag to these functions which involved
changing a lot of places in the code.
This was an opportunity to do a bit of code cleanup here and there,
for example, getting rid of the git_futils_cleanupdir_r function in
favor of a simple flag to git_futils_rmdir_r to not remove the top
level entry. That ended up adding depth tracking during rmdir_r
which led to a safety check for infinite directory recursion. Yay.
This hasn't actually been tested on the Mac filesystems where the
issue occurs. I still need to get test environment for that.
|