kmx git

Commit	Date	Message
e555d453	2020-11-05T11:07:54	Added SDL_JoystickHasLED Currently, this is only supported by the PS4 HIDAPI driver.
c3ecf18c	2020-07-21T23:38:42	Linux: Add hint for disabling deadzones
0e98040d	2020-06-28T16:23:05	joystick: Linux joysticks now recover better from dropped events. Fixes Bugzilla #4830.
9fa8d6d0	2020-06-08T17:07:55	Define constants not available on older kernels
ae9ff11b	2020-05-29T14:54:07	The zero happens at a higher level now
345b4d7e	2020-05-29T13:37:21	Fixed bug 5161 - Autodetect controller mappings based on the Linux Gamepad Specification Jan Bujak I wrote a new driver for my gamepad on Linux. I'd like SDL to support it out-of-box, as currently it just treats it as a generic joystick instead of a gamepad. From what I can see the only way to do that is to either 1) pick one of the already supported controllers' PID, VID and button layouts and have my driver send that (effectively lying that it's something else), or 2) submit a preconfigured, hardcoded mapping to SDL. Both of those, in my opinion, are silly when we already have the Linux Gamepad Specification which standarizes this: https://www.kernel.org/doc/html/v4.15/input/gamepad.html Unfortunately SDL doesn't make use of it currently. So I've took it upon myself to add it; patch is in the attachments. Basically what the patch does is that if SDL finds no built-it controller mappings for a given joystick it then asks the joystick backend to autodetect it, and that uses the relevant evdev bits to figure out which button/axis is which. (See the specs for more details.) With this patch applied my own driver for my controller works out-of-box with SDL with no extra configuration and is correctly recognized as a gamepad; this is also going to be the case for any other driver which follows the Linux Gamepad Specification.
83cddd2e	2020-04-30T11:57:29	Add SDL_JoystickSetLED. Currently, this is only supported by the PS4 HIDAPI driver.
885b3f69	2020-03-23T14:10:25	Don't check the HIDAPI driver for the virtual device created by xow
c44473ba	2020-03-12T19:47:30	Unified code to standardize joystick names
6efebf17	2020-02-04T12:48:53	Moved rumble expiration to the main joystick handling level, and prevent sending the driver layer duplicate rumble requests.
976eee77	2020-02-04T07:23:44	Correct joystick hat indexes on linux The index and indices were swapped; Which is fine as long as there are no gaps in the ABS_HAT* event availability but otherwise things do get confused. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
2ae41b9c	2020-01-23T12:53:43	Fixed mapping for both versions of the Xbox One Elite Series 2 controller firmware connecting over Bluetooth
6dc172d0	2020-01-23T12:53:39	Turn off rumble on drivers which don't respect the replay.length value
a8780c6a	2020-01-16T20:49:25	Updated copyright date for 2020
c14a59d9	2020-01-11T13:38:50	Worked around an issue where the kernel would lose the force feedback effect
46e1377d	2019-12-20T20:12:03	Automatically assign player indexes to game controllers, and allow changing the player index for game controllers and joysticks. Added the functions SDL_JoystickFromPlayerIndex(), SDL_JoystickSetPlayerIndex(), SDL_GameControllerFromPlayerIndex(), and SDL_GameControllerSetPlayerIndex()
0f529160	2019-12-11T17:47:01	Added custom names for some controllers
2a161e7a	2019-12-10T11:30:56	Remove any duplicate manufacturer in the joystick name
55eb7621	2019-11-20T20:27:45	Use stat() to minimize input device opens when not using udev Calling open() on input devices can generate device I/O which blocks the main thread and causes dropped frames. Using stat() we can avoid opening anything unless /dev/input has changed since we last polled. We could have used something fancy like inotify, but it didn't seem worth the added complexity for this uncommon non-udev case.
9da4bfc1	2019-10-22T10:57:07	Added support for the Power A Nintendo Switch Enhanced Wireless Controller
c10a8742	2019-07-31T10:20:37	Make sure HIDAPI is initialized whenever we call HIDAPI_IsDevicePresent()
c172f36b	2019-07-31T11:14:48	joystick: Ensure HIDAPI is initialized before calling it
a4bfe2a4	2019-06-24T21:08:26	Allow hotplugging joysticks without udev
747df96e	2019-06-12T10:38:49	Better patch to make it more clear what's going on
3fbaa5da	2019-06-12T10:35:47	The hat index passed to the application should be zero-based with no holes
a1a2f9b9	2019-06-12T10:32:36	Fixed bug 4486 - Segfault when pressing a trigger on the Steam Controller (Linux) Matteo Beniamino Pressing a trigger button on a Steam Controller causes a segmentation fault both with stable version and latest mercurial head on Linux. I'm using the recent hid_steam kernel module with lizard_mode disabled (that is no keyboard/mouse emulation). I suspect this is what's happening: the driver exposes two hats. The two hats have indices 0 and 2. Inside linux/SDL_sysjoystick.c two hats are allocated in allocate_hatdata for joystick->hwdata->hats. In HandleHat function the hat parameter (that can be 2) is directly used as the index of the array that only has two elements, causing an out of bounds access. SDL is not expecting to have "holes" between hats indices. The index 2 is calculated in HandleInputEvents() as (ABS_HAT2X - ABS_HAT0X) / 2 where ABS_HAT2X is the value associated to the hat inside the hid_steam module.
56b7f4cf	2019-06-08T14:40:27	Fixed bug 4583 - PollAllValues appears to use an incorrect index for all axes above 0x18 Noam Preil In src/joystick/linux/SDL_sysjoystick.c: The ConfigJoystick function's axes detection starts with a for loop using an index i for Linux's axes names. When i gets to ABS_HAT0X, it's set to ABS_HAT3Y and a continue statement appears, to skip the hats. This makes sense, as SDL handles hats separately from axes. However, in PollAllValues, two indices are used: a and b. Both start out the same, and remain so until the hats are reached. At that point, a becomes identical to the i from ConfigJoystick's loop, but b is equal to a - (ABS_HAT3Y - ABS_HAT0X), or a - 8. While all the joystick->hwdata->abs_* structures in ConfigJoystick used i - which would here be a - as both the index and the ioctl argument, PollAllValues uses b for the structure index and a as the ioctl argument. It would appear, however, that no joystick HAS such axes, and that the b index is entirely unnecessary. I tested three separate joysticks, and while that was far from a complete listing, I was unable to find a joystick with an axis above 0x08.
5e13087b	2019-01-04T22:01:14	Updated copyright for 2019
a7563bcd	2018-12-05T19:03:15	joystick: Removed unused variable.
6ed76ae1	2018-12-05T14:46:03	Fixed the ROCCAT Tyon mouse showing up as a joystick on Windows
2e348c1f	2018-11-14T13:37:22	Fixed bug 3193 - Dualshock 3's motion sensors overwrite analog stick maxxus The Dualshock 3's motion sensors don't seem to be reported by the call to EVIOCGBIT but they still send EV_ABS events. Because they're not reported by EVIOCGBIT they're not assigned a proper axis ids and the default of 0 is used, which is the valid id for the left analog sticks left/right axis.
14329256	2018-10-25T16:53:14	Generalized the XInput user index into a player index
708ad1fd	2018-10-16T14:58:07	Fixed updating the rumble parameters on Linux
63107524	2018-08-15T19:53:34	Fixed input from the Steam Virtual Gamepad on Mac OS X
888bf1af	2018-08-09T16:03:50	Worked around bug with Sony PS Now PS3 controller where DirectInput polling will continue to return success after the controller is unplugged. The code is now reliant on SDL_PrivateJoystickAdded() and SDL_PrivateJoystickRemoved() being called correctly when devices are added or removed on Windows
d2042e1e	2018-08-09T16:00:17	Added HIDAPI joystick drivers for more consistent support for Xbox, PS4 and Nintendo Switch Pro controller support across platforms. Added SDL_GameControllerRumble() and SDL_JoystickRumble() for simple force feedback outside of the SDL haptics API
e3cc5b2c	2018-01-03T10:03:25	Updated copyright for 2018
d8286479	2017-09-22T08:30:52	Added stubs for simple Steam Controller support
c49fa37c	2017-08-09T11:59:29	Added SDL hints to filter the set of game controllers reported by SDL
22c221f3	2017-06-11T22:30:58	linux: Changed internal functions to be static.
1eb92f63	2017-04-06T06:30:43	Implemented Linux joystick blacklist Based on https://raw.githubusercontent.com/denilsonsa/udev-joystick-blacklist/master/generate_rules.py This fixes a few devices that are not actually joysticks showing up as such in SDL
45b774e3	2017-01-01T18:33:28	Updated copyright for 2017
aa03b9d7	2016-11-22T22:14:28	The XBox One S controller sends keys outside the standard joystick button range
97aa5775	2016-11-16T22:08:51	Fixed empty parameter list in signatures of internal functions.
57d01d7d	2016-11-13T22:57:41	Patch from Sylvain to fix clang warnings
ac74e16c	2016-11-10T17:19:34	Standardized the format of the SDL joystick GUID and added functions to retrieve the USB VID/PID from a joystick and game controller.
ad1bfea5	2016-08-26T12:18:08	Added SDL_PrivateJoystickAdded() and SDL_PrivateJoystickRemoved() Updated the removal code to iterate over all joystick add messages instead of just the first one.
c69bce67	2016-08-26T11:16:44	commit 1170112da3776fdb06425f62d57b63144c33dc51 Author: James Zipperer <james.zipperer@synapse.com> Date: Sun Aug 21 01:19:19 2016 -0700 bugfix for controller / joystick add / remove being in the event queue at the same time
42065e78	2016-01-02T10:10:34	Updated copyright to 2016
0e45984f	2015-06-21T17:33:46	Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
f99d6e1d	2015-05-26T12:03:51	Linux joystick: Look at entire axis namespace for controls (thanks, "spaz16"!). This apparently has fallout: the PS4 (and maybe PS3?) controllers apparently report some bogus axes, but it won't change the axes we currently expect, and thus the game controller config string is still stable. Fixes Bugzilla #2719.
2c4a6ea0	2015-05-26T06:27:46	Updated the copyright year to 2015
b72938c8	2015-04-20T12:22:44	Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.
3e1d3629	2015-04-15T21:29:55	Fixed typo in internal joystick documentation comments.
fe6c797c	2015-04-10T23:30:31	Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.
162ef5ea	2015-03-24T13:52:01	Cleanups in the joystick code. Removed some redundant state and other confusions. Fixes Bugzilla #2738.
da843f6a	2015-03-11T21:14:21	Updated internal documentation comments.
b88ca1b4	2015-02-10T16:28:56	the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802
a7258066	2015-01-29T13:33:53	Fixed game controller hotplug support for some embedded Linux devices When guessing the device class, it ends up being 0 for devices that have been removed (because the device node no longer exists)
b48e54aa	2015-01-26T22:00:29	Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.
70438be2	2014-12-03T10:55:23	WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!
9c398852	2014-11-22T22:20:40	Corrected header file documentation comment.
24c86b55	2014-09-11T19:24:42	[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam
446d19c4	2014-06-14T23:31:23	Removed SDL_SYS_JoystickNeedsPolling(). It was simpler to just have the polling (actually: hotplug detection) functions return immediately if it's not an appropriate time to poll. Note that previously, if any joystick/controller was opened, we would poll every time anyhow, skipping this function.
3dcb451f	2014-04-09T21:29:19	Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.
58edac3e	2014-02-02T00:53:27	Fixed bug 2374 - Update copyright for 2014... Is it that time already??
62b17e7e	2014-01-29T00:27:54	Fixed comments in joystick implementation files claiming to be headers. It seems comments were originally copied from SDL_sysjoystick.h.
4ab350d4	2013-12-06T09:13:31	Fixed detecting the wired XBox 360 controller on Linux Also added some more debug output to detect issues
f848adff	2013-11-29T10:06:08	Improve Android pause/resume behavior.
7e1289af	2013-11-24T23:56:17	Make internal SDL sources include SDL_internal.h instead of SDL_config.h The new header will include SDL_config.h, but allows for other global stuff.
e3e24bde	2013-11-08T14:04:59	Make sure the joystick count is correct when the added and removed events are dispatched, in case someone is watching for them with an event filter.
e27248c2	2013-11-06T09:48:45	Fixes Bug 1944 - Linux events, joysticks having only hat are not read
08fa8da7	2013-10-20T21:56:15	Fixed bug 2129 - fix for bug 2121 breaks linking for mingw and throws multiple warnings Andreas Ertelt The problem in question is caused by changeset 7771 (http://hg.libsdl.org/SDL/rev/5486e579872e / https://bugzilla.libsdl.org/show_bug.cgi?id=2121) The redefinition of __inline__ (introduced by the addition of begin_code.h:128's "\|\| __STRICT_ANSI__") results in mingw's gcc throwing multiple warning: always_inline function might not be inlinable [-Wattributes] as well as a whole bunch of redefinitions of mingw internals which break linking of projects including the SDL2 headers.
15682c0c	2013-10-10T20:58:20	Report joystick added/removed events even if we don't have udev. T. Joseph Carter As discussed (possibly to death), the Linux joystick driver does not actually report events for added or removed joysticks when you haven't got udev support. We simply cannot know about removed joysticks without udev. But we can (and we should) report adding them. This brings the legacy case in line with pretty much the rest of SDL's joystick drivers.
90a219a3	2013-10-05T21:15:55	Fixed bug where a Logitech wireless keyboard with built-in mouse touchpad didn't get recongized as both devices.
57e09318	2013-10-01T08:47:06	Uses SDL_UDEV for Linux joystick hotplugging
dad42067	2013-08-12T11:13:50	Fixes #2022, do not resume on Android when surfaceChanged If the app is in landscape mode and the user presses the power button, a pause is followed immediately by a surfaceChanged event because the lock screen is shown in portrait mode. This triggers a "false" resume. So, we just pause and resume following the onWindowFocusChanged events. Also, wait for SDL_APP_WILLENTERBACKGROUND and SDL_APP_DIDENTERBACKGROUND before blocking the event pump.
1ad936eb	2013-08-11T19:56:43	Fixed bug 2027 - Full-screen appears to be broken - hang in SDL_DestroyWindow() Rainer Deyke I'm running Linux Mint 15 with the Cinnamon window manager. SDL_DestroyWindow consistently locks up for me when the window if fullscreen.

e555d453

2020-11-05T11:07:54

Added SDL_JoystickHasLED Currently, this is only supported by the PS4 HIDAPI driver.

c3ecf18c

2020-07-21T23:38:42

Linux: Add hint for disabling deadzones

0e98040d

2020-06-28T16:23:05

joystick: Linux joysticks now recover better from dropped events. Fixes Bugzilla #4830.

9fa8d6d0

2020-06-08T17:07:55

Define constants not available on older kernels

ae9ff11b

2020-05-29T14:54:07

The zero happens at a higher level now

345b4d7e

2020-05-29T13:37:21

Fixed bug 5161 - Autodetect controller mappings based on the Linux Gamepad Specification Jan Bujak I wrote a new driver for my gamepad on Linux. I'd like SDL to support it out-of-box, as currently it just treats it as a generic joystick instead of a gamepad. From what I can see the only way to do that is to either 1) pick one of the already supported controllers' PID, VID and button layouts and have my driver send that (effectively lying that it's something else), or 2) submit a preconfigured, hardcoded mapping to SDL. Both of those, in my opinion, are silly when we already have the Linux Gamepad Specification which standarizes this: https://www.kernel.org/doc/html/v4.15/input/gamepad.html Unfortunately SDL doesn't make use of it currently. So I've took it upon myself to add it; patch is in the attachments. Basically what the patch does is that if SDL finds no built-it controller mappings for a given joystick it then asks the joystick backend to autodetect it, and that uses the relevant evdev bits to figure out which button/axis is which. (See the specs for more details.) With this patch applied my own driver for my controller works out-of-box with SDL with no extra configuration and is correctly recognized as a gamepad; this is also going to be the case for any other driver which follows the Linux Gamepad Specification.

83cddd2e

2020-04-30T11:57:29

Add SDL_JoystickSetLED. Currently, this is only supported by the PS4 HIDAPI driver.

885b3f69

2020-03-23T14:10:25

Don't check the HIDAPI driver for the virtual device created by xow

c44473ba

2020-03-12T19:47:30

Unified code to standardize joystick names

6efebf17

2020-02-04T12:48:53

Moved rumble expiration to the main joystick handling level, and prevent sending the driver layer duplicate rumble requests.

976eee77

2020-02-04T07:23:44

Correct joystick hat indexes on linux The index and indices were swapped; Which is fine as long as there are no gaps in the ABS_HAT* event availability but otherwise things do get confused. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>

2ae41b9c

2020-01-23T12:53:43

Fixed mapping for both versions of the Xbox One Elite Series 2 controller firmware connecting over Bluetooth

6dc172d0

2020-01-23T12:53:39

Turn off rumble on drivers which don't respect the replay.length value

a8780c6a

2020-01-16T20:49:25

Updated copyright date for 2020

c14a59d9

2020-01-11T13:38:50

Worked around an issue where the kernel would lose the force feedback effect

46e1377d

2019-12-20T20:12:03

Automatically assign player indexes to game controllers, and allow changing the player index for game controllers and joysticks. Added the functions SDL_JoystickFromPlayerIndex(), SDL_JoystickSetPlayerIndex(), SDL_GameControllerFromPlayerIndex(), and SDL_GameControllerSetPlayerIndex()

0f529160

2019-12-11T17:47:01

Added custom names for some controllers

2a161e7a

2019-12-10T11:30:56

Remove any duplicate manufacturer in the joystick name

55eb7621

2019-11-20T20:27:45

Use stat() to minimize input device opens when not using udev Calling open() on input devices can generate device I/O which blocks the main thread and causes dropped frames. Using stat() we can avoid opening anything unless /dev/input has changed since we last polled. We could have used something fancy like inotify, but it didn't seem worth the added complexity for this uncommon non-udev case.

9da4bfc1

2019-10-22T10:57:07

Added support for the Power A Nintendo Switch Enhanced Wireless Controller

c10a8742

2019-07-31T10:20:37

Make sure HIDAPI is initialized whenever we call HIDAPI_IsDevicePresent()

c172f36b

2019-07-31T11:14:48

joystick: Ensure HIDAPI is initialized before calling it

a4bfe2a4

2019-06-24T21:08:26

Allow hotplugging joysticks without udev

747df96e

2019-06-12T10:38:49

Better patch to make it more clear what's going on

3fbaa5da

2019-06-12T10:35:47

The hat index passed to the application should be zero-based with no holes

a1a2f9b9

2019-06-12T10:32:36

Fixed bug 4486 - Segfault when pressing a trigger on the Steam Controller (Linux) Matteo Beniamino Pressing a trigger button on a Steam Controller causes a segmentation fault both with stable version and latest mercurial head on Linux. I'm using the recent hid_steam kernel module with lizard_mode disabled (that is no keyboard/mouse emulation). I suspect this is what's happening: the driver exposes two hats. The two hats have indices 0 and 2. Inside linux/SDL_sysjoystick.c two hats are allocated in allocate_hatdata for joystick->hwdata->hats. In HandleHat function the hat parameter (that can be 2) is directly used as the index of the array that only has two elements, causing an out of bounds access. SDL is not expecting to have "holes" between hats indices. The index 2 is calculated in HandleInputEvents() as (ABS_HAT2X - ABS_HAT0X) / 2 where ABS_HAT2X is the value associated to the hat inside the hid_steam module.

56b7f4cf

2019-06-08T14:40:27

Fixed bug 4583 - PollAllValues appears to use an incorrect index for all axes above 0x18 Noam Preil In src/joystick/linux/SDL_sysjoystick.c: The ConfigJoystick function's axes detection starts with a for loop using an index i for Linux's axes names. When i gets to ABS_HAT0X, it's set to ABS_HAT3Y and a continue statement appears, to skip the hats. This makes sense, as SDL handles hats separately from axes. However, in PollAllValues, *two* indices are used: a and b. Both start out the same, and remain so until the hats are reached. At that point, a becomes identical to the i from ConfigJoystick's loop, but b is equal to a - (ABS_HAT3Y - ABS_HAT0X), or a - 8. While all the joystick->hwdata->abs_* structures in ConfigJoystick used i - which would here be a - as both the index and the ioctl argument, PollAllValues uses b for the structure index and a as the ioctl argument. It would appear, however, that no joystick HAS such axes, and that the b index is entirely unnecessary. I tested three separate joysticks, and while that was far from a complete listing, I was unable to find a joystick with an axis above 0x08.

5e13087b

2019-01-04T22:01:14

Updated copyright for 2019

a7563bcd

2018-12-05T19:03:15

joystick: Removed unused variable.

6ed76ae1

2018-12-05T14:46:03

Fixed the ROCCAT Tyon mouse showing up as a joystick on Windows

2e348c1f

2018-11-14T13:37:22

Fixed bug 3193 - Dualshock 3's motion sensors overwrite analog stick maxxus The Dualshock 3's motion sensors don't seem to be reported by the call to EVIOCGBIT but they still send EV_ABS events. Because they're not reported by EVIOCGBIT they're not assigned a proper axis ids and the default of 0 is used, which is the valid id for the left analog sticks left/right axis.

14329256

2018-10-25T16:53:14

Generalized the XInput user index into a player index

708ad1fd

2018-10-16T14:58:07

Fixed updating the rumble parameters on Linux

63107524

2018-08-15T19:53:34

Fixed input from the Steam Virtual Gamepad on Mac OS X

888bf1af

2018-08-09T16:03:50

Worked around bug with Sony PS Now PS3 controller where DirectInput polling will continue to return success after the controller is unplugged. The code is now reliant on SDL_PrivateJoystickAdded() and SDL_PrivateJoystickRemoved() being called correctly when devices are added or removed on Windows

d2042e1e

2018-08-09T16:00:17

Added HIDAPI joystick drivers for more consistent support for Xbox, PS4 and Nintendo Switch Pro controller support across platforms. Added SDL_GameControllerRumble() and SDL_JoystickRumble() for simple force feedback outside of the SDL haptics API

e3cc5b2c

2018-01-03T10:03:25

Updated copyright for 2018

d8286479

2017-09-22T08:30:52

Added stubs for simple Steam Controller support

c49fa37c

2017-08-09T11:59:29

Added SDL hints to filter the set of game controllers reported by SDL

22c221f3

2017-06-11T22:30:58

linux: Changed internal functions to be static.

1eb92f63

2017-04-06T06:30:43

Implemented Linux joystick blacklist Based on https://raw.githubusercontent.com/denilsonsa/udev-joystick-blacklist/master/generate_rules.py This fixes a few devices that are not actually joysticks showing up as such in SDL

45b774e3

2017-01-01T18:33:28

Updated copyright for 2017

aa03b9d7

2016-11-22T22:14:28

The XBox One S controller sends keys outside the standard joystick button range

97aa5775

2016-11-16T22:08:51

Fixed empty parameter list in signatures of internal functions.

57d01d7d

2016-11-13T22:57:41

Patch from Sylvain to fix clang warnings

ac74e16c

2016-11-10T17:19:34

Standardized the format of the SDL joystick GUID and added functions to retrieve the USB VID/PID from a joystick and game controller.

ad1bfea5

2016-08-26T12:18:08

Added SDL_PrivateJoystickAdded() and SDL_PrivateJoystickRemoved() Updated the removal code to iterate over all joystick add messages instead of just the first one.

c69bce67

2016-08-26T11:16:44

commit 1170112da3776fdb06425f62d57b63144c33dc51 Author: James Zipperer <james.zipperer@synapse.com> Date: Sun Aug 21 01:19:19 2016 -0700 bugfix for controller / joystick add / remove being in the event queue at the same time

42065e78

2016-01-02T10:10:34

Updated copyright to 2016

0e45984f

2015-06-21T17:33:46

Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().

f99d6e1d

2015-05-26T12:03:51

Linux joystick: Look at entire axis namespace for controls (thanks, "spaz16"!). This apparently has fallout: the PS4 (and maybe PS3?) controllers apparently report some bogus axes, but it won't change the axes we currently expect, and thus the game controller config string is still stable. Fixes Bugzilla #2719.

2c4a6ea0

2015-05-26T06:27:46

Updated the copyright year to 2015

b72938c8

2015-04-20T12:22:44

Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.

3e1d3629

2015-04-15T21:29:55

Fixed typo in internal joystick documentation comments.

fe6c797c

2015-04-10T23:30:31

Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.

162ef5ea

2015-03-24T13:52:01

Cleanups in the joystick code. Removed some redundant state and other confusions. Fixes Bugzilla #2738.

da843f6a

2015-03-11T21:14:21

Updated internal documentation comments.

b88ca1b4

2015-02-10T16:28:56

the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802

a7258066

2015-01-29T13:33:53

Fixed game controller hotplug support for some embedded Linux devices When guessing the device class, it ends up being 0 for devices that have been removed (because the device node no longer exists)

b48e54aa

2015-01-26T22:00:29

Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.

70438be2

2014-12-03T10:55:23

WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!

9c398852

2014-11-22T22:20:40

Corrected header file documentation comment.

24c86b55

2014-09-11T19:24:42

[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam

446d19c4

2014-06-14T23:31:23

Removed SDL_SYS_JoystickNeedsPolling(). It was simpler to just have the polling (actually: hotplug detection) functions return immediately if it's not an appropriate time to poll. Note that previously, if any joystick/controller was opened, we would poll every time anyhow, skipping this function.

3dcb451f

2014-04-09T21:29:19

Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.

58edac3e

2014-02-02T00:53:27

62b17e7e

2014-01-29T00:27:54

Fixed comments in joystick implementation files claiming to be headers. It seems comments were originally copied from SDL_sysjoystick.h.

4ab350d4

2013-12-06T09:13:31

Fixed detecting the wired XBox 360 controller on Linux Also added some more debug output to detect issues

f848adff

2013-11-29T10:06:08

Improve Android pause/resume behavior.

7e1289af

2013-11-24T23:56:17

Make internal SDL sources include SDL_internal.h instead of SDL_config.h The new header will include SDL_config.h, but allows for other global stuff.

e3e24bde

2013-11-08T14:04:59

Make sure the joystick count is correct when the added and removed events are dispatched, in case someone is watching for them with an event filter.

e27248c2

2013-11-06T09:48:45

Fixes Bug 1944 - Linux events, joysticks having only hat are not read

08fa8da7

2013-10-20T21:56:15

Fixed bug 2129 - fix for bug 2121 breaks linking for mingw and throws multiple warnings Andreas Ertelt The problem in question is caused by changeset 7771 (http://hg.libsdl.org/SDL/rev/5486e579872e / https://bugzilla.libsdl.org/show_bug.cgi?id=2121) The redefinition of __inline__ (introduced by the addition of begin_code.h:128's "|| __STRICT_ANSI__") results in mingw's gcc throwing multiple warning: always_inline function might not be inlinable [-Wattributes] as well as a whole bunch of redefinitions of mingw internals which break linking of projects including the SDL2 headers.

15682c0c

2013-10-10T20:58:20

Report joystick added/removed events even if we don't have udev. T. Joseph Carter As discussed (possibly to death), the Linux joystick driver does not actually report events for added or removed joysticks when you haven't got udev support. We simply cannot know about removed joysticks without udev. But we can (and we should) report adding them. This brings the legacy case in line with pretty much the rest of SDL's joystick drivers.

90a219a3

2013-10-05T21:15:55

Fixed bug where a Logitech wireless keyboard with built-in mouse touchpad didn't get recongized as both devices.

57e09318

2013-10-01T08:47:06

Uses SDL_UDEV for Linux joystick hotplugging

dad42067

2013-08-12T11:13:50

Fixes #2022, do not resume on Android when surfaceChanged If the app is in landscape mode and the user presses the power button, a pause is followed immediately by a surfaceChanged event because the lock screen is shown in portrait mode. This triggers a "false" resume. So, we just pause and resume following the onWindowFocusChanged events. Also, wait for SDL_APP_WILLENTERBACKGROUND and SDL_APP_DIDENTERBACKGROUND before blocking the event pump.

1ad936eb

2013-08-11T19:56:43

Fixed bug 2027 - Full-screen appears to be broken - hang in SDL_DestroyWindow() Rainer Deyke I'm running Linux Mint 15 with the Cinnamon window manager. SDL_DestroyWindow consistently locks up for me when the window if fullscreen.

kc3-lang/SDL/src/joystick/linux/SDL_sysjoystick.c

src/joystick/linux/SDL_sysjoystick.c

Log