kmx git

Commit	Date	Message
65847539	2020-11-11T19:15:43	test: Add a unit test for input device classification heuristics This uses pre-recorded evdev capabilities, so that we can check for regressions without the devices having to be physically present. Signed-off-by: Simon McVittie <smcv@collabora.com>
77c9d73b	2020-10-05T11:30:33	Removed SDL_AndroidOpenURL, added SDL_OpenURL. Still needs to be wired into Xcode and Visual Studio projects.
fa23e3d0	2020-05-04T02:27:29	locale: Implemented SDL_GetPreferredLocales(). This was something I proposed a long time ago, Sylvain Becker did additional work on it, then back to me. Fixes Bugzilla #2131.
18d83093	2019-05-18T23:47:57	test: configure/make shouldn't build GL/GLES1/GLES2 programs if unsupported.
aae29c9e	2018-09-02T00:35:11	test: Makefile should copy .dat files for testoverlay2.
7c3040e0	2018-08-21T12:11:34	First pass on the new SDL sensor API
4764f7a4	2017-11-17T10:54:46	Fixed building YUV test programs (thanks Ozkan!)
a6a4e27a	2017-11-12T22:51:12	Updated SDL's YUV support, many thanks to Adrien Descamps New functions get and set the YUV colorspace conversion mode: SDL_SetYUVConversionMode() SDL_GetYUVConversionMode() SDL_GetYUVConversionModeForResolution() SDL_ConvertPixels() converts between all supported RGB and YUV formats, with SSE acceleration for converting from planar YUV formats (YV12, NV12, etc) to common RGB/RGBA formats. Added a new test program, testyuv, to verify correctness and speed of YUV conversion functionality.
25e3a1ec	2017-08-27T22:15:57	vulkan: Initial Vulkan support! This work was done by Jacob Lifshay and Mark Callow; I'm just merging it into revision control.
5dc35013	2017-05-29T18:24:06	test: Makefile.in should copy bitmap and wave files to build directory. I've lost count of the times I've forgotten to do this manually and wondered why loopwave can't open sample.wav. :)
60ba8552	2017-03-16T16:45:12	Backed out changeset e3fcdad257fc - testaudiocapture.c already does what we want
570e286f	2017-03-15T11:39:54	Added an audio recording test program
ee099750	2016-08-01T00:18:56	audio: Initial bits to enable audio capture support.
578edca4	2016-07-13T09:41:43	Tests: Would be wise to compile this
deb2acbc	2016-03-10T01:50:43	A simple test program for SDL_qsort().
c3114975	2016-01-04T23:52:40	Added SDL_GetDisplayUsableBounds().
b7ecc670	2015-07-14T21:28:26	Added test/testdisplayinfo.c
0e45984f	2015-06-21T17:33:46	Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
b72938c8	2015-04-20T12:22:44	Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.
fe6c797c	2015-04-10T23:30:31	Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.
0e02ce08	2015-03-16T02:11:39	Initial work on audio device hotplug support. This fills in the core pieces and fully implements it for Mac OS X. Most other platforms, at the moment, will report a disconnected device if it fails to write audio, but don't notice if the system's device list changed at all.
b88ca1b4	2015-02-10T16:28:56	the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802
b48e54aa	2015-01-26T22:00:29	Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.
31832d2a	2014-12-25T22:47:04	Removed missing test program from Makefile.
fe40a172	2014-12-18T00:19:52	Initial merge of Emscripten port! With this commit, you can compile SDL2 with Emscripten ( http://emscripten.org/ ), and make your SDL-based C/C++ program into a web app. This port was due to the efforts of several people, including: Charlie Birks, Sathyanarayanan Gunasekaran, Jukka Jyl?nki, Alon Zakai, Edward Rudd, Bruce Mitchener, and Martin Gerhardy. (Thanks, everyone!)
70438be2	2014-12-03T10:55:23	WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!
9c398852	2014-11-22T22:20:40	Corrected header file documentation comment.
24c86b55	2014-09-11T19:24:42	[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam
f30e120a	2014-07-22T21:41:49	Added audio device buffer queueing API.
c5812c55	2014-07-05T16:11:23	2620 solaris port missing atomics if not using gcc
98c03f39	2014-05-28T01:22:47	Changed drag area API to a hit-testing API. There were several good arguments for this: it's how Windows works with WM_NCHITTEST, SDL doesn't need to manage a list of rects, it allows more control over the regions (how do you use rects to cleanly surround a circular button?), the callback can be more optimized than a iterating a list of rects, and you don't have to send an updated list of rects whenever the window resizes or layout changes.
3cbc83ef	2014-05-27T01:27:42	First shot at SDL_SetWindowDragAreas(). Only Cocoa implemented right now.
3dcb451f	2014-04-09T21:29:19	Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.
f018ca46	2014-03-19T21:39:55	Add input validation to SDL_getenv/SDL_setenv; update Stdlib testsuite; add Hints testsuite
e0e6b2a4	2014-02-03T22:52:18	add simple test showing off hotplugging of joysticks w/ haptic.
ec1cb49e	2013-12-14T20:18:43	Wayland support Based on the original port to Wayland by: Joel Teichroeb, Benjamin Franzke, Scott Moreau, et al. Additional changes in this commit, done by me: * Wayland uses the common EGL framework * EGL can now create a desktop OpenGL context * testgl2 loads GL functions dynamically, no need to link to libGL anymore * Assorted fixes to the Wayland backend Tested on the Weston Compositor (v1.0.5) that ships with Ubuntu 13.10, running Weston under X. Tests ran: testrendercopyex (all backends), testgl2, testgles2,testintersections
95ec90aa	2013-12-02T19:35:04	Adds controllermap utility to test suite.
f848adff	2013-11-29T10:06:08	Improve Android pause/resume behavior.
47139fb3	2013-11-19T10:56:38	Adds testgles2 Source code copied from: https://github.com/fantasydr/sdl-2.0-gles (thanks!) Minor fixes, configure script changes done by me.
44959a21	2013-11-15T22:05:26	Added viewport test, contributed by Andreas Schiffler and improved by me and Ryan Gordon. If it works correctly you should see a square moving from the upper left to the lower right, with a little yellow box at the top of the moving square. You can pass --target as a command line option to have it use a render target instead of rendering directly to the screen. The output should be identical in this case.
7bc98157	2013-10-12T11:21:40	added simple Drag & drop test
eaa4300f	2013-10-09T11:30:01	Fixes testgles and testgl
2dd7091e	2013-08-20T19:57:11	Added SDL_GetBasePath() and SDL_GetPrefPath() in new filesystem module.
dad42067	2013-08-12T11:13:50	Fixes #2022, do not resume on Android when surfaceChanged If the app is in landscape mode and the user presses the power button, a pause is followed immediately by a surfaceChanged event because the lock screen is shown in portrait mode. This triggers a "false" resume. So, we just pause and resume following the onWindowFocusChanged events. Also, wait for SDL_APP_WILLENTERBACKGROUND and SDL_APP_DIDENTERBACKGROUND before blocking the event pump.
1ad936eb	2013-08-11T19:56:43	Fixed bug 2027 - Full-screen appears to be broken - hang in SDL_DestroyWindow() Rainer Deyke I'm running Linux Mint 15 with the Cinnamon window manager. SDL_DestroyWindow consistently locks up for me when the window if fullscreen.

65847539

2020-11-11T19:15:43

test: Add a unit test for input device classification heuristics This uses pre-recorded evdev capabilities, so that we can check for regressions without the devices having to be physically present. Signed-off-by: Simon McVittie <smcv@collabora.com>

77c9d73b

2020-10-05T11:30:33

Removed SDL_AndroidOpenURL, added SDL_OpenURL. Still needs to be wired into Xcode and Visual Studio projects.

fa23e3d0

2020-05-04T02:27:29

locale: Implemented SDL_GetPreferredLocales(). This was something I proposed a long time ago, Sylvain Becker did additional work on it, then back to me. Fixes Bugzilla #2131.

18d83093

2019-05-18T23:47:57

test: configure/make shouldn't build GL/GLES1/GLES2 programs if unsupported.

aae29c9e

2018-09-02T00:35:11

test: Makefile should copy .dat files for testoverlay2.

7c3040e0

2018-08-21T12:11:34

First pass on the new SDL sensor API

4764f7a4

2017-11-17T10:54:46

Fixed building YUV test programs (thanks Ozkan!)

a6a4e27a

2017-11-12T22:51:12

Updated SDL's YUV support, many thanks to Adrien Descamps New functions get and set the YUV colorspace conversion mode: SDL_SetYUVConversionMode() SDL_GetYUVConversionMode() SDL_GetYUVConversionModeForResolution() SDL_ConvertPixels() converts between all supported RGB and YUV formats, with SSE acceleration for converting from planar YUV formats (YV12, NV12, etc) to common RGB/RGBA formats. Added a new test program, testyuv, to verify correctness and speed of YUV conversion functionality.

25e3a1ec

2017-08-27T22:15:57

vulkan: Initial Vulkan support! This work was done by Jacob Lifshay and Mark Callow; I'm just merging it into revision control.

5dc35013

2017-05-29T18:24:06

test: Makefile.in should copy bitmap and wave files to build directory. I've lost count of the times I've forgotten to do this manually and wondered why loopwave can't open sample.wav. :)

60ba8552

2017-03-16T16:45:12

Backed out changeset e3fcdad257fc - testaudiocapture.c already does what we want

570e286f

2017-03-15T11:39:54

Added an audio recording test program

ee099750

2016-08-01T00:18:56

audio: Initial bits to enable audio capture support.

578edca4

2016-07-13T09:41:43

Tests: Would be wise to compile this

deb2acbc

2016-03-10T01:50:43

A simple test program for SDL_qsort().

c3114975

2016-01-04T23:52:40

Added SDL_GetDisplayUsableBounds().

b7ecc670

2015-07-14T21:28:26

Added test/testdisplayinfo.c

0e45984f

2015-06-21T17:33:46

Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().

b72938c8

2015-04-20T12:22:44

Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.

fe6c797c

2015-04-10T23:30:31

Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.

0e02ce08

2015-03-16T02:11:39

Initial work on audio device hotplug support. This fills in the core pieces and fully implements it for Mac OS X. Most other platforms, at the moment, will report a disconnected device if it fails to write audio, but don't notice if the system's device list changed at all.

b88ca1b4

2015-02-10T16:28:56

the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802

b48e54aa

2015-01-26T22:00:29

Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.

31832d2a

2014-12-25T22:47:04

Removed missing test program from Makefile.

fe40a172

2014-12-18T00:19:52

Initial merge of Emscripten port! With this commit, you can compile SDL2 with Emscripten ( http://emscripten.org/ ), and make your SDL-based C/C++ program into a web app. This port was due to the efforts of several people, including: Charlie Birks, Sathyanarayanan Gunasekaran, Jukka Jyl?nki, Alon Zakai, Edward Rudd, Bruce Mitchener, and Martin Gerhardy. (Thanks, everyone!)

70438be2

2014-12-03T10:55:23

WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!

9c398852

2014-11-22T22:20:40

Corrected header file documentation comment.

24c86b55

2014-09-11T19:24:42

[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam

f30e120a

2014-07-22T21:41:49

Added audio device buffer queueing API.

c5812c55

2014-07-05T16:11:23

2620 solaris port missing atomics if not using gcc

98c03f39

2014-05-28T01:22:47

Changed drag area API to a hit-testing API. There were several good arguments for this: it's how Windows works with WM_NCHITTEST, SDL doesn't need to manage a list of rects, it allows more control over the regions (how do you use rects to cleanly surround a circular button?), the callback can be more optimized than a iterating a list of rects, and you don't have to send an updated list of rects whenever the window resizes or layout changes.

3cbc83ef

2014-05-27T01:27:42

First shot at SDL_SetWindowDragAreas(). Only Cocoa implemented right now.

3dcb451f

2014-04-09T21:29:19

Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.

f018ca46

2014-03-19T21:39:55

Add input validation to SDL_getenv/SDL_setenv; update Stdlib testsuite; add Hints testsuite

e0e6b2a4

2014-02-03T22:52:18

add simple test showing off hotplugging of joysticks w/ haptic.

ec1cb49e

2013-12-14T20:18:43

Wayland support Based on the original port to Wayland by: Joel Teichroeb, Benjamin Franzke, Scott Moreau, et al. Additional changes in this commit, done by me: * Wayland uses the common EGL framework * EGL can now create a desktop OpenGL context * testgl2 loads GL functions dynamically, no need to link to libGL anymore * Assorted fixes to the Wayland backend Tested on the Weston Compositor (v1.0.5) that ships with Ubuntu 13.10, running Weston under X. Tests ran: testrendercopyex (all backends), testgl2, testgles2,testintersections

95ec90aa

2013-12-02T19:35:04

Adds controllermap utility to test suite.

f848adff

2013-11-29T10:06:08

Improve Android pause/resume behavior.

47139fb3

2013-11-19T10:56:38

Adds testgles2 Source code copied from: https://github.com/fantasydr/sdl-2.0-gles (thanks!) Minor fixes, configure script changes done by me.

44959a21

2013-11-15T22:05:26

Added viewport test, contributed by Andreas Schiffler and improved by me and Ryan Gordon. If it works correctly you should see a square moving from the upper left to the lower right, with a little yellow box at the top of the moving square. You can pass --target as a command line option to have it use a render target instead of rendering directly to the screen. The output should be identical in this case.

7bc98157

2013-10-12T11:21:40

added simple Drag & drop test

eaa4300f

2013-10-09T11:30:01

Fixes testgles and testgl

2dd7091e

2013-08-20T19:57:11

Added SDL_GetBasePath() and SDL_GetPrefPath() in new filesystem module.

dad42067

2013-08-12T11:13:50

Fixes #2022, do not resume on Android when surfaceChanged If the app is in landscape mode and the user presses the power button, a pause is followed immediately by a surfaceChanged event because the lock screen is shown in portrait mode. This triggers a "false" resume. So, we just pause and resume following the onWindowFocusChanged events. Also, wait for SDL_APP_WILLENTERBACKGROUND and SDL_APP_DIDENTERBACKGROUND before blocking the event pump.

1ad936eb

2013-08-11T19:56:43

Fixed bug 2027 - Full-screen appears to be broken - hang in SDL_DestroyWindow() Rainer Deyke I'm running Linux Mint 15 with the Cinnamon window manager. SDL_DestroyWindow consistently locks up for me when the window if fullscreen.

kc3-lang/SDL/test/Makefile.in

test/Makefile.in

Log