|
a6a4e27a
|
2017-11-12T22:51:12
|
|
Updated SDL's YUV support, many thanks to Adrien Descamps
New functions get and set the YUV colorspace conversion mode:
SDL_SetYUVConversionMode()
SDL_GetYUVConversionMode()
SDL_GetYUVConversionModeForResolution()
SDL_ConvertPixels() converts between all supported RGB and YUV formats, with SSE acceleration for converting from planar YUV formats (YV12, NV12, etc) to common RGB/RGBA formats.
Added a new test program, testyuv, to verify correctness and speed of YUV conversion functionality.
|
|
|
c317ab97
|
2017-11-12T10:59:05
|
|
Fixed Android build error on older SDK
|
|
|
20364769
|
2017-11-11T17:21:47
|
|
Fixed typo in comment
|
|
|
846d0080
|
2017-11-11T16:20:00
|
|
Only include Intel intrinsics header on x86 and x64
|
|
|
4026db8c
|
2017-11-10T14:22:21
|
|
Replaced the intrinsics header with the single header that includes all intrinsics so we can use AVX, etc.
|
|
5501bcc8
|
2017-11-09T22:24:09
|
|
macOS: Fix an OS-generated warning printed to stdout on launch in bundled apps.
|
|
|
fcb77f98
|
2017-11-08T14:17:23
|
|
Back out the following commits which are causing Dota 2 Exclusive Fullscreen to fail on AMD-based Macs. The details of why this is being reverted are at: https://bugzilla.libsdl.org/show_bug.cgi?id=3949
Alex Szpakowski <slime73@gmail.com> 2017-07-12 21:28 -0300
macOS: Expose more display modes on retina screens. Fixes an issue found in BZFlag.
http://hg.libsdl.org/SDL/rev/cfb3ddf796c3
Alex Szpakowski <slime73@gmail.com> 2017-07-12 21:32 -0300
Fix a potential crash in macOS 10.7 and earlier.
http://hg.libsdl.org/SDL/rev/4941c8867075
|
|
9f4e4be8
|
2017-11-07T09:10:32
|
|
Fixed bug 3943 - General SDL_HINT_VIDEO_DOUBLE_BUFFER hint support
|
|
5cc46f3d
|
2017-11-06T15:29:24
|
|
mouse: remove assert for unimplemented platforms (thanks, tomwardio!).
Fixes Bugzilla #3946.
|
|
|
bbb22a75
|
2017-11-05T01:17:24
|
|
Updated version to 2.0.8 since SDL_image depends on it
|
|
|
c5429bd9
|
2017-11-04T22:06:40
|
|
Fixed bug 3939 - Remove static vm_error and vm_event from SDL_x11modes.c
tomwardio
Remove static int vm_error and vm_event, use local variables instead.
This fixes unused variable errors when compiling with SDL_VIDEO_DRIVER_X11_XINERAMA undefined.
src/video/x11/SDL_x11modes.c:505:22: error: unused variable 'vm_error' [-Werror,-Wunused-variable]
src/video/x11/SDL_x11modes.c:505:12: error: unused variable 'vm_event' [-Werror,-Wunused-variable]
|
|
|
50e422ad
|
2017-11-04T22:03:28
|
|
Fixed bug 3917 - Android, issues with getManifestEnvironmentVariable
Sylvain
What about getting some return code instead of creating another native function.
|
|
|
2c5724ef
|
2017-11-04T21:58:48
|
|
Updated version to 2.0.8 since SDL_image depends on it
|
|
|
afbba182
|
2017-11-04T18:01:03
|
|
Fixed compiling on Windows with HAVE_LIBC enabled
|
|
|
34a8cf76
|
2017-11-04T17:39:28
|
|
Fixed compiler warnings after uClibc code update
|
|
|
bcdf8b91
|
2017-11-04T17:35:03
|
|
Added SDL_fmod() and SDL_fmodf()
|
|
|
6cf06575
|
2017-11-04T15:53:19
|
|
Updated math code from the uClibc 0.9.33 release
|
|
|
34502143
|
2017-11-04T15:34:14
|
|
Added float versions of SDL's math functions
|
|
|
bba90a65
|
2017-11-04T09:44:29
|
|
Fixed using libunwind on iOS, where it's only available on the simulator (thanks Vit!)
|
|
|
758156a7
|
2017-11-04T09:37:29
|
|
Fixed bug 3917 - Android, issues with getManifestEnvironmentVariable
We're going to push the manifest environment variables from the Java side instead of continually querying for them from the native side.
|
|
|
7334a2a1
|
2017-11-04T09:07:33
|
|
Fixed bug 3940 - Add support for EGL_SURFACE_TYPE
tomwardio
Add support to be able to set EGL_SURFACE_TYPE bits when creating an EGL config. This is usefule when wanting to create pixel buffer surfaces in custom video drivers.
|
|
bf3e363d
|
2017-11-04T09:04:19
|
|
Raspberry Pi: fix ES 1/PVR support & autodetect Mesa driver
* The brcmGLESv2 vendor library also supports ES PVR/1 profiles
* Fallback to standard Mesa libraries if the VC4 driver is loaded
|
|
|
547448df
|
2017-11-04T09:03:20
|
|
SDL_video: try to bootstrap KMSDRM before RPI video driver
Allow better coexistence between RPI's vendor libraries and VC4 mesa driver.
|
|
|
7abef33c
|
2017-11-04T09:00:40
|
|
Android configure-based build fixes (thanks Vit!)
|
|
17243133
|
2017-11-04T11:16:49
|
|
Emscripten: use cursor hotspot
the cursor's hotspot simply wasn't translated to it's CSS equivalent, yet
see https://developer.mozilla.org/en-US/docs/Web/CSS/cursor?v=example#Syntax. no explicit hotspot if (0|0) for compatibility with Edge and IE, which indeed don't support custom hot spots
|
|
|
bb8c3a9c
|
2017-11-02T10:41:55
|
|
Make SDL fullscreen windows on Android actually fullscreen
|
|
|
c954b538
|
2017-11-02T08:48:14
|
|
Fixed bug 3935 - Not find joysticks if android run 24-48 days.
Alexander Orefkov
In src\joystick\android\SDL_sysjoystick.c in SDL_SYS_JoystickDetect when SDL_GetTicks return number grater 2147483648 (after 24.85 days uptime) SDL_TICKS_PASSED(SDL_GetTicks(), timeout) return FALSE and Android_JNI_PollInputDevices is never calling.
And in JoystickByDeviceId - when search for newly added joystic - after SDL_SYS_JoystickDetect item not reinitilized, and always stay NULL, cause return NULL instead of added joystick.
|
|
|
522901b8
|
2017-11-02T08:46:14
|
|
Fixed bug 3933 - Android, no need of the listener thread
Sylvain
A listener thread has been added to know when the native thread would end.
But now, it is more easy to only check that after the main function has returned. It's one thread less.
|
|
|
1475e698
|
2017-11-01T19:19:21
|
|
Fixed bug 3917 - Android, issues with getManifestEnvironmentVariable
Sylvain
Some issue with this commit:
https://hg.libsdl.org/SDL/rev/97387a8b88d3
There is a memory allocation missing.
|
|
|
8c465802
|
2017-11-01T18:41:11
|
|
Allow the activity to persist through connecting or disconnecting a keyboard
|
|
|
62c3acaf
|
2017-11-01T18:40:11
|
|
Moved the meta-data into the right section
|
|
|
54a0245b
|
2017-11-01T17:41:25
|
|
Fixed bug 3926 - SDL_main export
e_pluschauskas
I noticed that after updating SDL to 2.0.6 my application now exports SDL_main.
At GitHub SDL mirror (branch 2.0.5) SDL_main prototyped as
extern C_LINKAGE int SDL_main(int argc, char *argv[]);
but at branch 2.0.6 prototype is
extern C_LINKAGE DECLSPEC int SDL_main(int argc, char *argv[]);
|
|
|
9192c93e
|
2017-11-01T17:30:02
|
|
Fixed bug 3932 - Android, GetDisplayDPI release local reference
Sylvain
When writing JNI code, one has to make sure all local references are released otherwise the app end up crashing.
|
|
|
a7d2d12c
|
2017-11-01T10:07:04
|
|
Fixed building on non-Android platforms
|
|
|
a90be440
|
2017-11-01T10:06:58
|
|
Added controller mapping for Android TV remotes
Also fixed the back button on the remote exiting the application
|
|
|
4478707b
|
2017-10-31T13:49:59
|
|
Add SDL_GetDisplayDPI implementation on Android. (thanks Rachel!)
|
|
|
6d23ea4b
|
2017-10-29T21:09:09
|
|
Fixed Java string comparison with ""
|
|
|
fa5db3a9
|
2017-10-28T12:11:25
|
|
Added the old ant Android build project structure
|
|
2ac567b7
|
2017-10-26T16:37:20
|
|
Fixed bug 3902 - Add a specific KMSDRM hint for low latency video
|
|
|
f24c6672
|
2017-10-26T10:49:33
|
|
Updated SDL iOS project for tvOS
|
|
|
213b2490
|
2017-10-26T10:42:14
|
|
Added missing keyinfotable.h
|
|
|
8e37bed3
|
2017-10-26T10:41:38
|
|
android: Fix softkeyboard issue in SDL on Android.
|
|
|
9bbf92e3
|
2017-10-25T18:02:11
|
|
cocoa: Don't change the NSWindow background color.
Changing the background color causes the titlebar to blend against it on
modern macOS releases, making all SDL windows look wrong by default. This was
set to make the window not flash white before a GL context is ready, but we
can accomplish this in our window's view's drawRect implementation, too.
|
|
0e032d58
|
2017-10-24T13:21:11
|
|
WinRT: Move Windows::Foundation::Initialize to SDL2.dll, from SDL_main.
This allows C# UWP applications to use SDL2's SDL_WinRTRunApp function.
Kudos to Ethan Lee (flibitijibibo@flibitijibibo.com) for the patch. Thanks!
|
|
|
8fd0c22a
|
2017-10-24T00:17:07
|
|
Added the ability to set SDL hints from AndroidManifest.xml (thanks Rachel!)
This is especially useful for things like the accelerometer hint which could be needed before application main().
|
|
|
45536710
|
2017-10-24T00:04:40
|
|
Fixed crash if mSurface isn't set up when we pause the application
|
|
|
81f7e0c1
|
2017-10-23T23:35:04
|
|
Removed unneeded file automatically generated by Android Studio
|
|
|
b8d8a1f1
|
2017-10-23T23:26:40
|
|
Updated the minimum and target SDK versions in AndroidManifest.xml
|
|
|
edf0fae1
|
2017-10-23T23:23:47
|
|
Updated Android build tools version, which bumped minimum deployment target to API 14
Also added native code to the Android gradle project, which allows using gradle or Android Studio to build the entire SDL application without a separate ndk-build step.
|
|
|
76cdce44
|
2017-10-23T23:23:34
|
|
Fixed build with older Android SDK
|
|
|
f08480af
|
2017-10-23T15:23:43
|
|
Switched to new style gradle Android application build process
|
|
|
862da6ff
|
2017-10-23T12:33:18
|
|
Added tag release-2.0.7 for changeset f69c9f74a857
|
|
b89cac67
|
2017-10-22T20:24:58
|
|
Don't X error in SDL_CreateWindow with unsupported GL attributes
|
|
|
adc64f92
|
2017-10-21T22:26:24
|
|
Added Visual Studio solution files for WinRT projects
|
|
|
10376eb9
|
2017-10-21T04:20:57
|
|
Fixed bug 3901 - Fix vsync-ed pageflips on the KMSDRM video driver
Manuel
I noticed that, at least on Intel GPU hardware, passing SDL_RENDERER_PRESENTVSYNC would result on a static console instead of the program graphics.
That was due to the fact that calling drmModePageFlip() only works if we have previously set up CRTC to one of the GBM buffers with a drmModeSetCrtc() call, so now it's done and things work as expected.
The KMSDRM_GLES_SetupCrtc() call is done only one time, only when needed (when egl_swapinterval is not 0: when it's 0, there's no need for it because we flip by calling drmModePageFlip() anyway).
The place where KMSDRM_GLES_SetupCrtc() call is done may look strange, but it's right: it needs EGL completely ready because it needs to call eglSwapBuffers() internally to work (see more comments about it in the code).
|
|
|
e830ef34
|
2017-10-20T16:53:42
|
|
Fixed typo converting 4 channel audio to 2 channel
|
|
|
9a291c1e
|
2017-10-20T14:51:22
|
|
Added a note about adjusting channel weights when converting to fewer channels
|
|
|
fe2b5fec
|
2017-10-20T14:48:10
|
|
Document the SDL audio channel mapping
|
|
|
7a6cf53a
|
2017-10-20T10:45:38
|
|
Added SDL_AudioStreamFlush() to the list of new audio stream functions
|
|
|
c339d9ed
|
2017-10-20T10:29:22
|
|
Reverted changes 6acdea394736 and 1448a2ac30fe
I don't want to introduce any regressions with Android TV remote support
|
|
|
2001898d
|
2017-10-19T15:37:52
|
|
Fixed Android joystick detection
|
|
|
72932906
|
2017-10-19T18:05:42
|
|
audio: Added SDL_AudioStreamFlush().
|
|
|
9d9be456
|
2017-10-19T13:54:56
|
|
Don't use DPAD devices as joystick input on Android
|
|
|
e98920f5
|
2017-10-18T23:49:46
|
|
Check correct variable for malloc() results.
|
|
|
afefcbfe
|
2017-10-18T19:30:47
|
|
Fixed bug 3876 - Resampling of certain sounds adds heavy distortion
Simon Hug
Patch that adds [-1, 1] clamping to the scalar audio type conversions.
This may come from the SDL_Convert_F32_to_X_Scalar functions. They don't clamp the float value to [-1, 1] and when they cast it to the target integer it may be too large or too small for the type and get truncated, causing horrible noise.
The attached patch throws clamping in, but I don't know if that's the preferred way to fix this. For x86 (without SSE) the compiler (I tested MSVC) seems to throw a horrible amount of x87 code in it. It's a bit better with SSE, but probably still quite the performance hit. And SSE2 uses a branchless approach with maxss and minss.
|
|
|
653ab5d9
|
2017-10-18T19:26:36
|
|
Added a staging buffer to the audio stream so that we can accumulate small amounts of data if needed when resampling
|
|
|
80f8464d
|
2017-10-18T15:54:05
|
|
Added audio stream conversion functions:
SDL_NewAudioStream
SDL_AudioStreamPut
SDL_AudioStreamGet
SDL_AudioStreamAvailable
SDL_AudioStreamClear
SDL_FreeAudioStream
|
|
|
9fd0d619
|
2017-10-18T08:52:04
|
|
Fixed bug 3821 - Allow SDL_CreateWindow and SDL_CreateRenderer with OpenGL ES 3.0 (GLES3) for Angle (Windows)
Carlos
Angle supports GLES3 but when using these functions (SDL_CreateWindow and SDL_CreateRenderer), defaults again to GLES2.0.
A current workaround (hack) to retrieve a GLES3.0 context with Angle is:
1) set
SDL_GL_SetAttribute(SDL_GL_CONTEXT_MAJOR_VERSION, 3);
SDL_GL_SetAttribute(SDL_GL_CONTEXT_MINOR_VERSION, 0);
after InitSDL AND after calling SDL_CreateWindow (before SDL_CreateRenderer)
2) Comment lines 2032-2044 in SDL_render_gles2.c, funtion GLES2_CreateRenderer
window_flags = SDL_GetWindowFlags(window);
if (!(window_flags & SDL_WINDOW_OPENGL) ||
profile_mask != SDL_GL_CONTEXT_PROFILE_ES || major != RENDERER_CONTEXT_MAJOR || minor != RENDERER_CONTEXT_MINOR) {
changed_window = SDL_TRUE;
SDL_GL_SetAttribute(SDL_GL_CONTEXT_PROFILE_MASK, SDL_GL_CONTEXT_PROFILE_ES);
SDL_GL_SetAttribute(SDL_GL_CONTEXT_MAJOR_VERSION, RENDERER_CONTEXT_MAJOR);
SDL_GL_SetAttribute(SDL_GL_CONTEXT_MINOR_VERSION, RENDERER_CONTEXT_MINOR);
if (SDL_RecreateWindow(window, window_flags | SDL_WINDOW_OPENGL) < 0) {
goto error;
}
}
This retrives a GLES3 context as confirmed using glGetString(GL_VERSION). This should be fixed by modifying a few if's.
|
|
|
556a8544
|
2017-10-16T15:22:40
|
|
Fixed compiler warning on iOS
|
|
|
e4ef1885
|
2017-10-16T14:57:42
|
|
Fixed bug 3890 - Incomplete fix for CVE-2017-2888
Felix Geyer
http://hg.libsdl.org/SDL/rev/a31ee4d64ff6 tries to fix CVE-2017-2888.
Unfortunately compilers may optimize the second condition "(size / surface->pitch) != surface->h" away.
See https://bugzilla.redhat.com/show_bug.cgi?id=1500623#c2
I've verified that this is also the case on Debian unstable (gcc 7.2).
|
|
|
a225ffc1
|
2017-10-16T14:39:56
|
|
Added min/max macros for the sized SDL datatypes
|
|
|
8e98bdaa
|
2017-10-15T21:21:19
|
|
Fixed bug 3883 - SDL_assert / SDL_PromptAssertion in TTY mode does not accept options ("abriA")
shoerbaffen
fgets can read a newline and SDL_strcmp will never return zero.
|
|
|
f658a737
|
2017-10-15T21:07:01
|
|
Fixed bug 3882 - cmake fix for osx
Ozkan Sezer
In my cross-build environment with cmake-2.8.12.1, cmake does not add
SDL_coreaudio.m to its makefiles and the result is a failure. The fix
is simple: set the language to C for it as it is done at other places
in CMakeLists.txt.
|
|
|
dff56c34
|
2017-10-13T19:55:07
|
|
Android Studio code analyzer fixes
|
|
|
a223560a
|
2017-10-13T19:30:34
|
|
Fixed bug 3880 - X Error upon quit since rev. 11607
Ozkan Sezer
Since changeset 11607:60cd425a2f14, I am getting the following
error upon quit. Running testsprite2, clicking the mouse, and
quiting it is enough to trigger it. This is on my old Fedora9
x86-Linux:
X Error of failed request: BadCursor (invalid Cursor parameter)
Major opcode of failed request: 2 (X_ChangeWindowAttributes)
Resource id in failed request: 0xb057340
Serial number of failed request: 905
Current serial number in output stream: 906
Reverting https://hg.libsdl.org/SDL/rev/60cd425a2f14 removes
the error.
|
|
|
cf923648
|
2017-10-13T09:50:04
|
|
Fixed bug 3879 - add missing SDLCALL to SDLTest_TrackedMalloc & co.
Ozkan Sezer
The attached trivial patch adds missing SDLCALL to SDLTest_TrackedMalloc & co.
|
|
|
fa156741
|
2017-10-13T01:15:29
|
|
coreaudio: changed device close procedure to prevent long hangs in some cases.
The audioqueue thread needs to keep running, and processing the CFRunLoop
until the AudioQueue is disposed of, otherwise CoreAudio will hang waiting for
final data to feed the device.
At least, I think this is how it all works. It definitely fixes the bug here!
Since AudioQueueDispose() calls AudioQueueStop() internally, there's no need
for our thread to handle this, either, which is good because the AudioQueue
would be disposed by this point. So now the AudioQueue is disposed first, and
then our thread is joined, and everything works out okay.
Just in case, we mark the device "paused" before setting everything in motion,
so any further callbacks from CoreAudio will write silence and not fire the
app's audio callback again.
Fixes Bugzilla #3868.
|
|
|
0506d4fc
|
2017-10-12T17:21:57
|
|
Build both 32 and 64-bit architectures in the OSX Framework
|
|
|
fc60db86
|
2017-10-12T17:17:09
|
|
Fixed compiler warning
|
|
|
22b6df51
|
2017-10-12T14:46:28
|
|
Use the lower-case hex output to match other stack trace printouts
|
|
|
70791956
|
2017-10-12T14:44:54
|
|
Fixed compiler warning
|
|
|
5fc20176
|
2017-10-12T14:25:07
|
|
Fixed bug 3877 - missing SDLCALL in SDLTest_ExampleHitTestCallback
Ozkan Sezer
Following trivial patch adds missing SDLCALL to SDLTest_ExampleHitTestCallback()
|
|
|
4b284298
|
2017-10-12T14:21:21
|
|
Android doesn't have libunwind.h in API 16
|
|
|
41a60394
|
2017-10-12T14:20:17
|
|
Added missing file
|
|
|
21cd2df6
|
2017-10-12T14:02:24
|
|
Fixed compiler warning
|
|
|
ba10d2b6
|
2017-10-12T13:55:35
|
|
Fixed compiler warning
|
|
|
9c580e14
|
2017-10-12T13:44:28
|
|
Added functions to query and set the SDL memory allocation functions:
SDL_GetMemoryFunctions()
SDL_SetMemoryFunctions()
SDL_GetNumAllocations()
|
|
|
1887c54c
|
2017-10-12T13:28:48
|
|
Fixed memory leak in Cocoa mouse code
The video quit call cleans up the mouse cursor driver data, which happens after mouse quit
|
|
|
f4cd68a5
|
2017-10-12T08:47:02
|
|
Fixed bug 3866 - CMake error when trying to make the 'uninstall' target when it already exists
Steve Robinson
In my project, the 'uninstall' target is already created by the glew library. I get this error when SDL2 tries to create it:
CMake Error at _build/3rdparty/SDL2/SDL2-2.0.6/CMakeLists.txt:1816 (add_custom_target):
add_custom_target cannot create target "uninstall" because another target
with the same name already exists. The existing target is a custom target
created in source directory
"D:/Code/sdl2-tutorial/_build/3rdparty/glew/glew-2.1.0/build/cmake". See
documentation for policy CMP0002 for more details.
To fix it, go to the bottom of the SDL2 CMakeLists.txt file. Add an if statement to check for the existence of the target before creating it. The end result looks like this:
if(NOT TARGET uninstall)
configure_file(
"${CMAKE_CURRENT_SOURCE_DIR}/cmake_uninstall.cmake.in"
"${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake"
IMMEDIATE @ONLY)
add_custom_target(uninstall
COMMAND ${CMAKE_COMMAND} -P ${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake)
endif()
This is how the glew library deals with this possibility in their CMakeLists.txt file.
|
|
|
4f38db17
|
2017-10-12T08:44:45
|
|
Fixed bug 3867 - Can't find install_manifest.txt when running 'uninstall' target
Steve Robinson
When I try to build the 'uninstall' target in CMake when SDL2 is added to a subdirectory of my project, I get this error:
1>CMake Error at cmake_uninstall.cmake:2 (message):
1> Cannot find install manifest:
1> "D:/Code/sdl2-tutorial/_build/3rdparty/SDL2/SDL2-2.0.6/install_manifest.txt"
The install_manifest.txt is actually in the top-level binary directory, not the project-specific binary directory.
To fix it, change all instances of:
CMAKE_CURRENT_BINARY_DIR
To:
CMAKE_BINARY_DIR
In:
cmake_uninstall.cmake.in
|
|
|
f4f9e39f
|
2017-10-12T08:41:11
|
|
Fixed bug 3874 - Compiler warnings SDL_Surface.c and SDL_cocoakeyboard.m
|
|
|
a7c79c5e
|
2017-10-12T08:37:55
|
|
Normalize touch events to the render viewport (thanks Sylvain!)
|
|
|
5bed4ca9
|
2017-10-12T08:27:22
|
|
Fixed divide by zero with a 1x1 sized window
|
|
|
0ce23a54
|
2017-10-12T08:08:04
|
|
Updated version to 2.0.7
|
|
bef0fec1
|
2017-10-12T14:28:05
|
|
make sure that SDL_malloc(0) or SDL_calloc(0,x) doesn't return NULL.
|
|
|
c0019b7f
|
2017-10-11T13:31:21
|
|
Fixed bug 3871 - Touch events are not normalised on X11
Trent Gamblin
The documentation for SDL_TouchFingerEvent says that the x and y coordinates are normalised between 0-1. I've found that to be true on Windows, Android and iOS but on X11 they are in pixel coordinates. This patch fixes the issue. This was the cleanest way I could do it with what was available without changing things around a lot but you may know a better way.
|
|
|
b53c35df
|
2017-10-11T13:26:58
|
|
Fixed size in realloc
|
|
|
5e5f2290
|
2017-10-11T12:07:43
|
|
audio: Turns out the accumulation errors sound better. :/
Moving to double fixed the overflows, but using "time = i * incr" instead of
"time += incr" causes clicks in the output.
|
|
|
9bd2c6b4
|
2017-10-11T11:51:14
|
|
audio: Moved the resampler state up to double precision.
Fixes more buffer overflows.
|
|
|
b2f5123b
|
2017-10-11T11:43:35
|
|
audio: calculate resampling time directly, don't increment (thanks, Eric!).
Fixes buffer overruns as floating point errors accumulate.
Partially fixes Bugzilla #3848.
|