kmx git

Commit	Date	Message
412ceb84	2022-05-24T16:27:54	video: Only check major version in SDL_GetWindowWMInfo Since #5602, SDL is intended to have the same ABI across the whole major-version 2 cycle, so we should not check that the minor version matches the one that was used to compile an application. There are two checks that could make sense here. The first check is that the major version matches the expected major version. This is usually unnecessary and is not usually done (if we're calling into the wrong library we'll likely crash anyway), but since we have the information, we might as well continue to use it. The second check is whether the version provided by the caller is equal to or greater than a threshold version at which additional fields were added to the struct. If it is, we should populate those fields; if it is not, then we cannot. This is only useful on platforms where additional fields have genuinely been added during the lifetime of SDL 2, like Windows and DirectFB (but not X11). This commit changes the first check to be consistent about only looking at the minor version, while leaving the second check using SDL_VERSIONNUM (which will be removed or widened in SDL 3, but it's fine for now). Resolves: https://github.com/libsdl-org/SDL/issues/5711 Fixes: cd7c2f1 "Switch versioning scheme to be the same as GLib and Flatpak" Signed-off-by: Simon McVittie <smcv@collabora.com>
2f924020	2022-05-05T20:12:07	Add SDL_SCANCODE_CALL and SDL_SCANCODE_ENDCALL
2bc37362	2022-05-05T13:31:26	Add SDL_SCANCODE_SOFTLEFT and SDL_SCANCODE_SOFTRIGHT
f5a98044	2022-03-23T10:13:56	Android: add SetWindowResizable() implementation - which also enable/disable the orientation lock status. This is only provided when the window is not SDL_WINDOW_FULLSCREEN (see SDL_video.c). Final orientation also depends on SDL_HINT_ORIENTATIONS.
7495b981	2022-03-11T15:14:51	Make SDL_VIDEO_OPENGL_EGL optional on Android
120c76c8	2022-01-03T09:40:00	Updated copyright for 2022
a1e992b1	2021-12-21T22:07:17	Fixed bug #5118 - [Android] PointerIcon leak in Cursor API
2423c514	2021-10-13T09:33:51	Work around hang in AAudioStream_write() during extended shared object loading while running in a debugger. Observed on a OnePlus 8T (KB2005) running Oxygen OS 11.0.10.10.KB05AA. The observed behavior is that any nonzero timeout value would hang until the device was paused and resumed. And a zero timeout value would always return 0 frames written even when audio fragments could be heard. Making a manual timeout system unworkable. None of the straightforward systems imply that there's a detectable problem before the call to AAudioStream_write(). And the callback set within AAudioStreamBuilder_setErrorCallback() does not get called as we enter the hang state. I've found that AAudioStream_getTimestamp() will report an error state from another thread. So this change codifies that behavior a bit until a better fix or more root cause can be found.
98a966d1	2021-04-22T18:06:17	Android: don't need to set the SurfaceHolder format from java code It's already set with ANativeWindow_setGeometry, and eventually set/changed also by eglCreateWindowSurface. - avoid issues with older device where SurfaceView cycle create/changed/destroy appears broken: calling create/changed/changed, and leading to "deuqueBuffer failed at server side, error: -19", with black screen. - re-read the format after egl window surface is created, to report the correct one (sometimes, changed from RGBA8888 to RGB24)
b4f89c56	2021-04-15T21:16:10	AAudio: add aaudio pause/resume function to android events loop
65fbf36c	2021-02-12T14:46:49	Cleaned up a few more Bugzilla mentions.
9130f7c3	2021-01-02T10:25:38	Updated copyright for 2021
cb361896	2020-12-09T07:16:22	Fixed bug 5235 - All internal sources should include SDL_assert.h Ryan C. Gordon We should really stick this in SDL_internal.h or something so it's always available.
955f3184	2020-09-25T10:14:42	Fixed bug 5239 - Play audio on Android while backgrounded (Thanks Superfury) Add hint SDL_HINT_ANDROID_BLOCK_ON_PAUSE_PAUSEAUDIO not to pause audio when the app goes to background. (It requires SDL_ANDROID_BLOCK_ON_PAUSE as "Non blocking")
052a1373	2020-07-12T19:11:15	Merge VideoBootStrap::available into VideoBootStrap::create The two are only ever called together, and combining them makes it possible to eliminate redundant symbol loading and redundant attempts to connect to a display server.
b6afbe63	2020-04-07T09:38:57	Added SDL_log.h to SDL_internal.h so logging is available everywhere
005e2dff	2020-01-17T12:41:54	Android: prevents rare crashes when app goes to background or ends. Make sure the thread is actually paused, and context backep-up, before SurfaceView is destroyed (eg surfaceDestroyed() actually returns). Add a timeout when surfaceDestroyed() is called, and check 'backup_done' variable. It prevents crashes like: #00 pc 000000000000c0d0 /system/lib64/libutils.so (android::RefBase::incStrong(void const) const+8) #01 pc 000000000000c7f4 /vendor/lib64/egl/eglSubDriverAndroid.so (EglAndroidWindowSurface::UpdateBufferList(ANativeWindowBuffer)+284) #02 pc 000000000000c390 /vendor/lib64/egl/eglSubDriverAndroid.so (EglAndroidWindowSurface::DequeueBuffer()+240) #03 pc 000000000000bb10 /vendor/lib64/egl/eglSubDriverAndroid.so (EglAndroidWindowSurface::GetBuffer(EglSubResource, EglMemoryDesc)+64) #04 pc 000000000032732c /vendor/lib64/egl/libGLESv2_adreno.so (EglWindowSurface::UpdateResource(EsxContext)+116) #05 pc 0000000000326dd0 /vendor/lib64/egl/libGLESv2_adreno.so (EglWindowSurface::GetResource(EsxContext, EsxResource, EsxResource, int)+56) #06 pc 00000000002ae484 /vendor/lib64/egl/libGLESv2_adreno.so (EsxContext::AcquireBackBuffer(int)+364) #07 pc 0000000000249680 /vendor/lib64/egl/libGLESv2_adreno.so (EsxContext::Clear(unsigned int, unsigned int, unsigned int, EsxClearValues)+1800) #08 pc 00000000002cb52c /vendor/lib64/egl/libGLESv2_adreno.so (EsxGlApiParamValidate::GlClear(EsxDispatch, unsigned int)+132)
d52ba78b	2020-01-17T12:04:18	Fixed bug 4246 - Android: orientation between portrait<->landscape doesn't work Improve handling of landscape/portrait orientation. Promote to SCREEN_ORIENTATION_SENSOR_* when needed. Android window can be somehow resizable. If SDL_WINDOW_RESIZABLE is set, window size change is allowed, for instance when orientation changes (provided the hint allows it).
a8780c6a	2020-01-16T20:49:25	Updated copyright date for 2020
d004cc70	2019-12-21T22:40:33	Android: same way as in nativePause(), resume events are sent from SDL thread
45a9b5fa	2019-12-21T21:18:02	Android: fix call of glFinish without context. Message in the log, when going to background: "call to OpenGL ES API with no current context (logged once per thread)" Because of SDL_WINDOWEVENT_MINIMIZED is sent from the Java Activity thread. It calls SDL_RendererEventWatch(), _WindowEvent() and glFinish() without context. Solution is to move sending of SDL_WINDOWEVENT_MINIMIZED to the SDL thread.
54748a39	2019-12-08T11:33:06	Fixed bug 4890 - Add hint for SDL that the graphics context is externally managed Aaron Barany Add SDL_HINT_VIDEO_EXTERNAL_CONTEXT hint to notify SDL that the graphics context is external. This disables the automatic context save/restore behavior on Android and avoids using OpenGL by default when SDL_WINDOW_VUKLAN isn't set. When the application wishes to manage the OpenGL contexts on Android, this avoids cases where SDL unbinds the context and creates new contexts, which can interfere with the application's operation. When using Vulkan and Metal renderer implementations, this avoids SDL forcing OpenGL to be enabled on certain platforms. While using the SDL_WINDOW_VULKAN flag can be used to achieve the same thing, it also causes Vulkan to be loaded. If the application uses Vulkan directly, this is not necessary, and fails window creation when using Metal due to Vulkan not being present. (assuming MoltenVK isn't installed)
303646a6	2019-10-31T15:53:10	Android: some readability: redundant casts, deads stores, redundant control flow
70dc8d16	2019-08-30T08:55:20	Android: fix corresponding warnings
d5ec735a	2019-08-01T18:22:12	Add a windowID field to SDL_TouchFingerEvent (bug #4331). This is unimplemented on some platforms and will cause compile errors when building those platform backends for now.
22a2decf	2019-06-28T16:38:42	Android: concurrency issues, make sure Activity is in running State when calling functions like SDL_CreateWindow, SDL_CreateRenderer, Android_GLES_CreateContext Bugs 4694, 4681, 4142
aa45af7f	2019-06-28T16:05:20	Android: explicitly expand Android_GLES_MakeCurrent/Android_GLES_CreateContext from SDL_egl_c.h
e96d4760	2019-06-18T18:53:58	Android: resize with software rendering, reverted again (Bug 4669)
12b92260	2019-06-18T18:40:40	Android: try to fix resize with software rendering (bug 4669)
a55c0e14	2019-06-18T10:23:19	Android: revert previous commit (Bug 4669) (Refs #1)
f2157b6c	2019-06-17T22:31:36	Fixed bug 4669: Android software renderer, black screen when window resizes Using the software SDL_Renderer on Android leads to GL errors & black screen when window resizes
f9a9193e	2019-06-10T21:58:03	Android: add MinimizeWindow function (Bug 4580, 4657) shouldMinimizeOnFocusLoss is un-activated (return false)
f0a4fea8	2019-04-25T14:17:07	Fixed bug 4608 - Android: not getting SDL_WINDOWEVENT_FOCUS_GAINED on start of our app Dan Ginsburg I've seen this on several devices including Moto Z running Android 7 and a Snapdragon 845 running Android 9. What happens is as follows: SDLActivity.onWindowFocusChanged(true) happens pretty early on, but it's before we've done SDL_CreateWindow and so Android_Window is 0x0 thus this message does not get sent: JNIEXPORT void JNICALL SDL_JAVA_INTERFACE(nativeFocusChanged)( JNIEnv env, jclass cls, jboolean hasFocus) { SDL_LockMutex(Android_ActivityMutex); if (Android_Window) { __android_log_print(ANDROID_LOG_VERBOSE, "SDL", "nativeFocusChanged()"); SDL_SendWindowEvent(Android_Window, (hasFocus ? SDL_WINDOWEVENT_FOCUS_GAINED : SDL_WINDOWEVENT_FOCUS_LOST), 0, 0); } SDL_UnlockMutex(Android_ActivityMutex); } When the window does get created, in Android_CreateWindow it does this: window->flags &= ~SDL_WINDOW_RESIZABLE; / window is NEVER resizeable / window->flags &= ~SDL_WINDOW_HIDDEN; window->flags \|= SDL_WINDOW_SHOWN; / only one window on Android / window->flags \|= SDL_WINDOW_INPUT_FOCUS; / always has input focus / / One window, it always has focus / SDL_SetMouseFocus(window); SDL_SetKeyboardFocus(window); The SDL_SetKeyboardFocus does send an SDL_WINDOWEVENT_FOCUS_GAINED message, but it gets eaten in SDL_SendWindowEvent because we've forced SDL_WINDOW_INPUT_FOCUS beforehand: case SDL_WINDOWEVENT_FOCUS_GAINED: if (window->flags & SDL_WINDOW_INPUT_FOCUS) { return 0; } window->flags \|= SDL_WINDOW_INPUT_FOCUS; SDL_OnWindowFocusGained(window); break; I can fix the problem if I comment out this line from Android_CreateWindow: window->flags \|= SDL_WINDOW_INPUT_FOCUS; / always has input focus */ I would propose that as a fix unless there is a reason not to.
2c92c8e8	2019-04-23T14:24:58	Android: add static variable initialization in non blocking event loop
bd344c22	2019-04-12T23:15:26	Android: when event loop is not blocking in pause, backup EGL context (Bug 4578) Backup the EGL context when SDL_APP_DIDENTERBACKGROUND has been removed from the event queue.
05333a6e	2019-04-05T09:16:30	Android: add hint SDL_HINT_ANDROID_BLOCK_ON_PAUSE to set whether the event loop will block itself when the app is paused.
bfdd0b22	2019-04-04T17:01:02	Android: remove SDL_HINT_ANDROID_SEPARATE_MOUSE_AND_TOUCH java layer runs as if separate mouse and touch was 1, Use SDL_HINT_MOUSE_TOUCH_EVENTS and SDL_HINT_TOUCH_MOUSE_EVENTS for generating synthetic touch/mouse events
b45abbb2	2019-04-02T17:57:27	Bug 4576: fix warning and compile
9b3c2258	2019-04-02T17:23:55	Bug 4576: remove touch/mouse duplication for Android
d05eec72	2019-03-12T14:44:25	Fixed initial display orientation at Android app start
61827c6d	2019-01-20T12:02:12	Fixed compiler warning on Android
e5f8801f	2019-01-17T11:05:05	Android: prevent concurrency in Android_SetScreenResolution() when exiting by checking Android_Window validity - SDLThread: user application is exiting: SDL_VideoQuit() and clearing SDL_GetVideoDevice() - ActivityThread is changing orientation/size surfaceChanged() > Android_SetScreenResolution() > SDL_GetVideoDevice() - Separate function into Android_SetScreenResolution() and Android_SendResize(), formating, and mark Android_DeviceWidth/Heigh as static
e994be58	2019-01-16T10:31:51	Android: move static variable isPaused/isPausing to SDL_VideoData structure - remove unneed check to Android_Window->driverdata - add window check into context_backup/restore
dc263450	2019-01-14T23:33:48	Android: create Pause/ResumeSem semaphore at higher level than CreateWindow() - If you call onPause() before CreateWindow(), SDLThread will run in infinite loop in background. - If you call onPause() between a DestroyWindow() and a new CreateWindow(), semaphores are invalids. SDLActivity.java: the first resume() starts the SDLThread, don't call nativeResume() as it would post ResumeSem. And the first pause would automatically be resumed.
955d8789	2019-01-14T12:33:29	Android/openslES: set audio in paused/resumed state for Android event loop And also in "stopped" state before closing the device.
fb8cb95f	2019-01-12T12:12:43	Fixed compiler warning
7a1d1bae	2019-01-10T21:40:57	Android: add name for Touch devices and simplification, from bug 3958
02f292eb	2019-01-09T22:49:49	Android: add some SetError for Android_SetWindowFullscreen First error could happen if Android_SetWindowFullscreen somehow gets called between SurfaceDestroyed() and SurfaceCreated() Second error should not happen has native_window validity is guaranteed. (It would happens previously with error -19)
1803944b	2019-01-09T15:18:41	Android: concurrency issue for Android_SetWindowFullscreen() It accesses data->native_window, which can be changed by onNativeSurfacedChanged(). Currently, Android_SetWindowFullscreen() may access data->native_window after it has been released, and before a new reference is acquired. (can be reproduced by adding some SDL_Delay() in onNativeSurfacedChanged and Android_SetWindowFullscreen() ).
462e62e1	2019-01-06T20:25:54	Android: better fix for bug 3186. Run those commands from SDL thread.
e4f558a5	2019-01-05T22:46:52	Android: un-needed check of "isPausing" and minor typos
35722b64	2019-01-05T22:27:25	Android: fix wrong state after immediate sequence pause() / resume() / pause() It may happen to have the sequence pause()/resume()/pause(), before polling any events. Before, it ends in 'resumed' state because as the check is greedy. Now, always increase the Pause semaphore, and stop at each pause. It ends in 'paused' state. Related to bug 3250: set up a reconfiguration of SurfaceView holder. Turn the screen off manually before the app starts (repro rate is not 100%..)
5e13087b	2019-01-04T22:01:14	Updated copyright for 2019
2a885eb0	2019-01-04T23:39:27	Android: fixed immediate transition to pause and resume. "Pause" transition will add events: SDL_WINDOWEVENT_ENTER SDL_WINDOWEVENT_FOCUS_LOST SDL_WINDOWEVENT_MINIMIZED SDL_APP_WILL ENTER BACKGROUND SDL_APP_DID ENTER BACKGROUND "Resume" transition will add events: SDL_APP_WILL ENTER FOREGROUND SDL_APP_DID ENTER FOREGROUND SDL_WINDOWEVENT_FOCUS_GAINED SDL_WINDOWEVENT_RESTORED If Android application doesn't empty the event loop in between, it enters in "paused" state when SDL_WINDOWEVENT_RESTORED is fetched. See bug 3250 for pratical case.
cf122344	2019-01-04T23:11:21	Android: make Android_PumpEvents() more readable No behavior change in this commit.
ca184ac3	2019-01-03T23:22:50	Android: concurrency issue with egl_surface EGL_BAD_SURFACE - (bug 4142) Occurs when application goes to background: - Java activity is destroying SurfaceView holder and "egl_surface" (in onNativeSurfaceDestroyed()) - While native thread is in Android_GLES_SwapWindow(), prepared to call SDL_EGL_SwapBuffers() The error is "call to eglSwapBuffers failed, reporting an error of EGL_BAD_SURFACE" It an be reproduced easily by adding a SDL_Delay(100) at the begining of SDL_EGL_SwapBuffers(), and putting the application into background.
2e19343d	2019-01-03T20:18:29	Android: use Mutex instead of Semphore for bug 4142
23478642	2019-01-03T16:22:33	Android: prevent the error message from SDL_EGL_CreateSurface() to be masked.
cc8f1136	2019-01-03T14:18:06	Fixed bug 4142 - Concurrency issues in Android backend Use a semaphore to prevent concurrency issues between Java Activity and Native thread code, when using 'Android_Window'. (Eg. Java sending Touch events, while native code is destroying the main SDL_Window. )
d11f7615	2019-01-03T13:38:33	Android: minor preparation for bug 4142 (concurrency issues)
5dc25fef	2019-01-03T13:14:16	Android: preparation bug 4142, reduce usage of global variable Android_Window
252dc85e	2018-12-06T09:22:00	Fix warnings detected on Android build
5029d50e	2018-11-10T16:15:48	Add SDL_TouchDeviceType enum and SDL_GetTouchDeviceType(SDL_TouchID id). Touch device types include SDL_TOUCH_DEVICE_DIRECT (a touch screen with window-relative coordinates for touches), SDL_TOUCH_DEVICE_INDIRECT_ABSOLUTE (a trackpad-style device with absolute device coordinates), and SDL_TOUCH_DEVICE_INDIRECT_RELATIVE (a trackpad-style device with screen cursor-relative coordinates). Phone screens are an example of a direct device type. Mac trackpads are the indirect-absolute touch device type. The Apple TV remote is an indirect-relative touch device type.
4d771c59	2018-10-08T12:49:25	Don't flash the navigation bar when destroying a fullscreen SDL window
74638ea3	2018-09-28T20:39:57	Ensure we wait on the surface resize before returning from setting fullscreen mode.
5febdfce	2018-09-24T11:49:25	Fixed whitespace
88dfa466	2018-06-18T13:14:04	Use a blank cursor instead of PointerIcon.TYPE_NULL since that shows the default cursor on Samsung DeX
4a4bac95	2018-06-12T13:22:58	Deal with fullscreen limitations under windowed Android environments (Chromebook, DeX, etc.) (Thanks Rachel!)
fe196db7	2018-06-07T17:07:03	Track android device panel width & height as well as window surface & height. Expand SDLActivity::SDLSurface::surfaceChanged() callback to grab the panel width and height at the same time and pass that along to the native code. Only works on API 17+. Duplicates surface dimensions whenever it fails. Add Android_DeviceWidth/Android_DeviceHeight globals to native code. Disambiguate Android_ScreenWidth/Android_ScreenHeight -> Android_SurfaceWidth/Android_SurfaceHeight Use device width/height for all display mode settings.
2dedbc72	2018-06-05T12:46:11	Add Android support for relative mouse mode to SDL.
f536fbea	2018-03-16T11:08:53	Reimplemented Android cursor API support using reflection so it builds with older SDKs
e20d4173	2018-03-15T18:22:48	Added Android custom cursor implementation This is commented out in SDLActivity.java, with the note #CURSORIMPLEENTATION because it requires API 24, which is higher than the minimum required SDK
849d042f	2018-02-24T08:58:22	Fixed bug 4091 - Undefined references to Android audio functions when SDL_AUDIO_DISABLED is on Manuel Sabogal If SDL is compiled with the Audio subsystem disabled there are some undefined references to the functions ANDROIDAUDIO_ResumeDevices and ANDROIDAUDIO_PauseDevices in the file src/video/android/SDL_androidevents.c.
40b27fd5	2018-02-12T17:00:00	revert the recent typecast assignment changes (see bug #4079) also change the void* typedefs for the two vulkan function pointers added in vulkan_internal.h into generic function pointer typedefs.
6e01fbb7	2018-02-11T18:23:37	On Android show the system UI when an SDL window is windowed, hide the system UI when it's fullscreen, like we do on iOS. We're increasing the Android SDK minimum version to API 19, this doesn't increase the minimum target API, which is API 14.
90e72bf4	2018-01-30T18:08:34	Fixed ISO C99 compatibility SDL now builds with gcc 7.2 with the following command line options: -Wall -pedantic-errors -Wno-deprecated-declarations -Wno-overlength-strings --std=c99
e3cc5b2c	2018-01-03T10:03:25	Updated copyright for 2018
4478707b	2017-10-31T13:49:59	Add SDL_GetDisplayDPI implementation on Android. (thanks Rachel!)
c8e3e0c4	2017-09-06T01:10:10	Fixed bug 3799 - SDL_CreateWindow fails with SDL_WINDOW_VULKAN (libvulkan.so.1 not found) Manuel Sabogal Android NDK defines Vulkan as libvulkan.so, not libvulkan.so.1. This is causing the program to not being able to create a window using SDL_WINDOW_VULKAN. To fix this issue just change the line http://hg.libsdl.org/SDL/file/bbaec41e93b5/src/video/android/SDL_androidvulkan.c#l53 from "libvulkan.so.1" to "libvulkan.so"
50efbda7	2017-08-28T00:43:14	Fixed mingw Windows build, since SDL_vulkan_internal.h includes windows.h
0d011ec6	2017-08-28T00:22:23	Renaming of guard header names to quiet -Wreserved-id-macro
ce2b1644	2017-08-28T00:11:38	Be clear that disabling Vulkan surface support disables the entire SDL Vulkan integration
5cd1a959	2017-08-27T23:53:09	Fixed Android build with Vulkan support
82ffabc8	2017-08-27T22:34:15	Fixed Android build
25e3a1ec	2017-08-27T22:15:57	vulkan: Initial Vulkan support! This work was done by Jacob Lifshay and Mark Callow; I'm just merging it into revision control.
de91b124	2017-08-14T06:28:21	Fixed bug 3745 - specify SDLCALL as the calling convention for API callbacks Patches contributed by Ozkan Sezer
e54eede2	2017-08-13T21:05:15	Provide the correct state of the on-screen keyboard to the API (patch from Sylvain)
6ee66139	2017-08-13T20:55:59	Fixed bug 3235 - Make the Android window creation similar to iOS' window creation Sylvain Here's a patch. It tries to get the hint first. Resizable will allow any orientation. Otherwise it uses width/height window. setOrientation method is splitted in static and non-static, so that it can be overloaded in a user subclass. Some artefact observed : surfaceChanged() can be called twice at the beginning. When the phone starts in portrait and run a landscape application.
c0862512	2017-08-12T12:24:59	Fixed bug 3128 - Removing all the static variables from android SDLActivity and accompanying JNI calls. owen I removed all the static variables from SDLActivity.java Updated all the SDL_android.c jni calls as well I added a new function to SDL_android.c/ h void Android_JNI_SeparateEventsHint(const char* c); This is called by SDL_androidtouch.c so that this TU doesn't need to call any JNI functions.
78c84e70	2017-08-12T08:06:16	Fixed part of bug 3227 - patch for multiple buttons at the same time not working Philipp Wiesemann There is another problem with the current implementation which maybe should be fixed first (to prevent some work). It was written as if it would get the number of a button from the Java side but actually it gets the state of all buttons. That is why it should not work if more than one button is pressed at once.
56363ebf	2017-08-02T10:22:48	Fixed bug 3690 - SDL2 KMS/DRM render context support Manuel The attached patch adds support for KMS/DRM context graphics. It builds with no problem on X86_64 GNU/Linux systems, provided the needed libraries are present, and on ARM GNU/Linux systems that have KMS/DRM support and a GLES2 implementation. Tested on Raspberry Pi: KMS/DRM is what the Raspberry Pi will use as default in the near future, once the propietary DispmanX API by Broadcom is overtaken by open graphics stack, it's possible to boot current Raspbian system in KMS mode by adding "dtoverlay=vc4-kms-v3d" to config.txt on Raspbian's boot partition. X86 systems use KMS right away in every current GNU/Linux system. Simple build instructions: $./autogen.sh $./configure --enable-video-kmsdrm $make
2008d866	2017-07-20T10:46:38	Fixed bug 3703 - Missing media keys support on Amazon Fire TV remote control Holger Schemel Summary: This patch adds support for key events for the "rewind" and "fast forward" media keys on the Amazon Fire TV remote control. How to reproduce the problem: Run Android build of SDL2 application on the Amazon Fire TV (tested with "stick" version) and log key events. Expected behaviour: Every key pressed on the Fire TV remote control should result in a corresponding key event (pressed/released). Observed behaviour: Of the bottom row of buttons on the Fire TV remote control, only the "play/pause" (middle) button generates a key event, while the "rewind" (left) and "fast forward" (right) buttons to not generate any event at all. The attached patch adds support for these two missing buttons/keys. Note 1: Some missing definitions were added for the already existing key codes SDL_SCANCODE_APP1 and SDL_SCANCODE_APP2 (to keep up the correct order of enumerations / array positions when adding the two new key codes). Note 2: Definitions in "scancodes_linux.h" and "scancodes_xfree86.h" (to also add support for these keys on other platforms) were added without testing. However, I was unable to find corresponding definitions for these two media keys for Windows and Mac OS X. Note 3: I have also updated the (broken) link to the USB usage page standard PDF document (comment in "include/SDL_scancode.h").
ccf0566c	2017-05-16T06:30:39	SDL - add SDL_WINDOW_VULKAN and make Android_CreateWindow only create an EGLSurface when SDL_WINDOW_VULKAN is not present. This makes it so the ANativeWindow* can be used with vkCreateAndroidSurfaceKHR, otherwise it will fail because having both an EGLSurface and VkSurfaceKHR attached to a window is not allowed according to the Vulkan spec: "In particular, only one VkSurfaceKHR can exist at a time for a given window. Similarly, a native window cannot be used by both a VkSurfaceKHR and EGLSurface simultaneously" CR: SamL
266816b4	2017-03-26T21:00:19	Removed newlines from error messages.
22161480	2017-03-14T07:22:08	Compile fix for android. "ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]" Moving some variable declarations to the top of Android_SetScreenResolution()
45b774e3	2017-01-01T18:33:28	Updated copyright for 2017
97d05b0d	2016-12-09T05:12:27	Fixed a bunch of SwapWindow calls that needed their return value updated
26f05ecb	2016-12-02T02:25:12	Fixed missing prototypes on Android, patch from Sylvain
f674f231	2016-10-07T15:21:19	Fixed bug 2808 - Fix SDL reporting wrong window size on resume Jonas Kulla At startup time, the single android window is assigned a "windowed" (window->windowed.{w,h}) size based on the current orientation of the mobile device; this size is never updated throughout the lifetime of the app. This becomes problematic when the app is paused and then resumed in an orientation that it did not start up in. Eventually, 'SDL_OnWindowRestored()' is called, which calls 'SDL_UpdateFullscreenMode()'. This function is very problematic because it is written with a desktop monitor in mind: it tries to find a matching display mode for the windowed size, doesn't find any, and finally applies the windowed size as the fullscreen one. In the end, the windowed size is reported in a RESIZED event, which doesn't correspond to the actual surface size. To see this in action: Start an orientation aware SDL app in eg. portrait mode, suspend the app, put the device into landscape orientation and resume the app. It will erroneously render in portrait mode (until the device is rotated again).
555e6c96	2016-10-01T14:18:29	Fix SDL not resizing window when Android screen resolution changes

412ceb84

2022-05-24T16:27:54

video: Only check major version in SDL_GetWindowWMInfo Since #5602, SDL is intended to have the same ABI across the whole major-version 2 cycle, so we should not check that the minor version matches the one that was used to compile an application. There are two checks that could make sense here. The first check is that the major version matches the expected major version. This is usually unnecessary and is not usually done (if we're calling into the wrong library we'll likely crash anyway), but since we have the information, we might as well continue to use it. The second check is whether the version provided by the caller is equal to or greater than a threshold version at which additional fields were added to the struct. If it is, we should populate those fields; if it is not, then we cannot. This is only useful on platforms where additional fields have genuinely been added during the lifetime of SDL 2, like Windows and DirectFB (but not X11). This commit changes the first check to be consistent about only looking at the minor version, while leaving the second check using SDL_VERSIONNUM (which will be removed or widened in SDL 3, but it's fine for now). Resolves: https://github.com/libsdl-org/SDL/issues/5711 Fixes: cd7c2f1 "Switch versioning scheme to be the same as GLib and Flatpak" Signed-off-by: Simon McVittie <smcv@collabora.com>

2f924020

2022-05-05T20:12:07

Add SDL_SCANCODE_CALL and SDL_SCANCODE_ENDCALL

2bc37362

2022-05-05T13:31:26

Add SDL_SCANCODE_SOFTLEFT and SDL_SCANCODE_SOFTRIGHT

f5a98044

2022-03-23T10:13:56

Android: add SetWindowResizable() implementation - which also enable/disable the orientation lock status. This is only provided when the window is not SDL_WINDOW_FULLSCREEN (see SDL_video.c). Final orientation also depends on SDL_HINT_ORIENTATIONS.

7495b981

2022-03-11T15:14:51

Make SDL_VIDEO_OPENGL_EGL optional on Android

120c76c8

2022-01-03T09:40:00

Updated copyright for 2022

a1e992b1

2021-12-21T22:07:17

Fixed bug #5118 - [Android] PointerIcon leak in Cursor API

2423c514

2021-10-13T09:33:51

Work around hang in AAudioStream_write() during extended shared object loading while running in a debugger. Observed on a OnePlus 8T (KB2005) running Oxygen OS 11.0.10.10.KB05AA. The observed behavior is that any nonzero timeout value would hang until the device was paused and resumed. And a zero timeout value would always return 0 frames written even when audio fragments could be heard. Making a manual timeout system unworkable. None of the straightforward systems imply that there's a detectable problem before the call to AAudioStream_write(). And the callback set within AAudioStreamBuilder_setErrorCallback() does not get called as we enter the hang state. I've found that AAudioStream_getTimestamp() will report an error state from another thread. So this change codifies that behavior a bit until a better fix or more root cause can be found.

98a966d1

2021-04-22T18:06:17

Android: don't need to set the SurfaceHolder format from java code It's already set with ANativeWindow_setGeometry, and eventually set/changed also by eglCreateWindowSurface. - avoid issues with older device where SurfaceView cycle create/changed/destroy appears broken: calling create/changed/changed, and leading to "deuqueBuffer failed at server side, error: -19", with black screen. - re-read the format after egl window surface is created, to report the correct one (sometimes, changed from RGBA8888 to RGB24)

b4f89c56

2021-04-15T21:16:10

AAudio: add aaudio pause/resume function to android events loop

65fbf36c

2021-02-12T14:46:49

Cleaned up a few more Bugzilla mentions.

9130f7c3

2021-01-02T10:25:38

Updated copyright for 2021

cb361896

2020-12-09T07:16:22

Fixed bug 5235 - All internal sources should include SDL_assert.h Ryan C. Gordon We should really stick this in SDL_internal.h or something so it's always available.

955f3184

2020-09-25T10:14:42

Fixed bug 5239 - Play audio on Android while backgrounded (Thanks Superfury) Add hint SDL_HINT_ANDROID_BLOCK_ON_PAUSE_PAUSEAUDIO not to pause audio when the app goes to background. (It requires SDL_ANDROID_BLOCK_ON_PAUSE as "Non blocking")

052a1373

2020-07-12T19:11:15

Merge VideoBootStrap::available into VideoBootStrap::create The two are only ever called together, and combining them makes it possible to eliminate redundant symbol loading and redundant attempts to connect to a display server.

b6afbe63

2020-04-07T09:38:57

Added SDL_log.h to SDL_internal.h so logging is available everywhere

005e2dff

2020-01-17T12:41:54

Android: prevents rare crashes when app goes to background or ends. Make sure the thread is actually paused, and context backep-up, before SurfaceView is destroyed (eg surfaceDestroyed() actually returns). Add a timeout when surfaceDestroyed() is called, and check 'backup_done' variable. It prevents crashes like: #00 pc 000000000000c0d0 /system/lib64/libutils.so (android::RefBase::incStrong(void const*) const+8) #01 pc 000000000000c7f4 /vendor/lib64/egl/eglSubDriverAndroid.so (EglAndroidWindowSurface::UpdateBufferList(ANativeWindowBuffer*)+284) #02 pc 000000000000c390 /vendor/lib64/egl/eglSubDriverAndroid.so (EglAndroidWindowSurface::DequeueBuffer()+240) #03 pc 000000000000bb10 /vendor/lib64/egl/eglSubDriverAndroid.so (EglAndroidWindowSurface::GetBuffer(EglSubResource*, EglMemoryDesc*)+64) #04 pc 000000000032732c /vendor/lib64/egl/libGLESv2_adreno.so (EglWindowSurface::UpdateResource(EsxContext*)+116) #05 pc 0000000000326dd0 /vendor/lib64/egl/libGLESv2_adreno.so (EglWindowSurface::GetResource(EsxContext*, EsxResource**, EsxResource**, int)+56) #06 pc 00000000002ae484 /vendor/lib64/egl/libGLESv2_adreno.so (EsxContext::AcquireBackBuffer(int)+364) #07 pc 0000000000249680 /vendor/lib64/egl/libGLESv2_adreno.so (EsxContext::Clear(unsigned int, unsigned int, unsigned int, EsxClearValues*)+1800) #08 pc 00000000002cb52c /vendor/lib64/egl/libGLESv2_adreno.so (EsxGlApiParamValidate::GlClear(EsxDispatch*, unsigned int)+132)

d52ba78b

2020-01-17T12:04:18

Fixed bug 4246 - Android: orientation between portrait<->landscape doesn't work Improve handling of landscape/portrait orientation. Promote to SCREEN_ORIENTATION_SENSOR_* when needed. Android window can be somehow resizable. If SDL_WINDOW_RESIZABLE is set, window size change is allowed, for instance when orientation changes (provided the hint allows it).

a8780c6a

2020-01-16T20:49:25

Updated copyright date for 2020

d004cc70

2019-12-21T22:40:33

Android: same way as in nativePause(), resume events are sent from SDL thread

45a9b5fa

2019-12-21T21:18:02

Android: fix call of glFinish without context. Message in the log, when going to background: "call to OpenGL ES API with no current context (logged once per thread)" Because of SDL_WINDOWEVENT_MINIMIZED is sent from the Java Activity thread. It calls SDL_RendererEventWatch(), _WindowEvent() and glFinish() without context. Solution is to move sending of SDL_WINDOWEVENT_MINIMIZED to the SDL thread.

54748a39

2019-12-08T11:33:06

Fixed bug 4890 - Add hint for SDL that the graphics context is externally managed Aaron Barany Add SDL_HINT_VIDEO_EXTERNAL_CONTEXT hint to notify SDL that the graphics context is external. This disables the automatic context save/restore behavior on Android and avoids using OpenGL by default when SDL_WINDOW_VUKLAN isn't set. When the application wishes to manage the OpenGL contexts on Android, this avoids cases where SDL unbinds the context and creates new contexts, which can interfere with the application's operation. When using Vulkan and Metal renderer implementations, this avoids SDL forcing OpenGL to be enabled on certain platforms. While using the SDL_WINDOW_VULKAN flag can be used to achieve the same thing, it also causes Vulkan to be loaded. If the application uses Vulkan directly, this is not necessary, and fails window creation when using Metal due to Vulkan not being present. (assuming MoltenVK isn't installed)

303646a6

2019-10-31T15:53:10

Android: some readability: redundant casts, deads stores, redundant control flow

70dc8d16

2019-08-30T08:55:20

Android: fix corresponding warnings

d5ec735a

2019-08-01T18:22:12

Add a windowID field to SDL_TouchFingerEvent (bug #4331). This is unimplemented on some platforms and will cause compile errors when building those platform backends for now.

22a2decf

2019-06-28T16:38:42

Android: concurrency issues, make sure Activity is in running State when calling functions like SDL_CreateWindow, SDL_CreateRenderer, Android_GLES_CreateContext Bugs 4694, 4681, 4142

aa45af7f

2019-06-28T16:05:20

Android: explicitly expand Android_GLES_MakeCurrent/Android_GLES_CreateContext from SDL_egl_c.h

e96d4760

2019-06-18T18:53:58

Android: resize with software rendering, reverted again (Bug 4669)

12b92260

2019-06-18T18:40:40

Android: try to fix resize with software rendering (bug 4669)

a55c0e14

2019-06-18T10:23:19

Android: revert previous commit (Bug 4669) (Refs #1)

f2157b6c

2019-06-17T22:31:36

Fixed bug 4669: Android software renderer, black screen when window resizes Using the software SDL_Renderer on Android leads to GL errors & black screen when window resizes

f9a9193e

2019-06-10T21:58:03

Android: add MinimizeWindow function (Bug 4580, 4657) shouldMinimizeOnFocusLoss is un-activated (return false)

f0a4fea8

2019-04-25T14:17:07

Fixed bug 4608 - Android: not getting SDL_WINDOWEVENT_FOCUS_GAINED on start of our app Dan Ginsburg I've seen this on several devices including Moto Z running Android 7 and a Snapdragon 845 running Android 9. What happens is as follows: SDLActivity.onWindowFocusChanged(true) happens pretty early on, but it's before we've done SDL_CreateWindow and so Android_Window is 0x0 thus this message does not get sent: JNIEXPORT void JNICALL SDL_JAVA_INTERFACE(nativeFocusChanged)( JNIEnv *env, jclass cls, jboolean hasFocus) { SDL_LockMutex(Android_ActivityMutex); if (Android_Window) { __android_log_print(ANDROID_LOG_VERBOSE, "SDL", "nativeFocusChanged()"); SDL_SendWindowEvent(Android_Window, (hasFocus ? SDL_WINDOWEVENT_FOCUS_GAINED : SDL_WINDOWEVENT_FOCUS_LOST), 0, 0); } SDL_UnlockMutex(Android_ActivityMutex); } When the window does get created, in Android_CreateWindow it does this: window->flags &= ~SDL_WINDOW_RESIZABLE; /* window is NEVER resizeable */ window->flags &= ~SDL_WINDOW_HIDDEN; window->flags |= SDL_WINDOW_SHOWN; /* only one window on Android */ window->flags |= SDL_WINDOW_INPUT_FOCUS; /* always has input focus */ /* One window, it always has focus */ SDL_SetMouseFocus(window); SDL_SetKeyboardFocus(window); The SDL_SetKeyboardFocus does send an SDL_WINDOWEVENT_FOCUS_GAINED message, but it gets eaten in SDL_SendWindowEvent because we've forced SDL_WINDOW_INPUT_FOCUS beforehand: case SDL_WINDOWEVENT_FOCUS_GAINED: if (window->flags & SDL_WINDOW_INPUT_FOCUS) { return 0; } window->flags |= SDL_WINDOW_INPUT_FOCUS; SDL_OnWindowFocusGained(window); break; I can fix the problem if I comment out this line from Android_CreateWindow: window->flags |= SDL_WINDOW_INPUT_FOCUS; /* always has input focus */ I would propose that as a fix unless there is a reason not to.

2c92c8e8

2019-04-23T14:24:58

Android: add static variable initialization in non blocking event loop

bd344c22

2019-04-12T23:15:26

Android: when event loop is not blocking in pause, backup EGL context (Bug 4578) Backup the EGL context when SDL_APP_DIDENTERBACKGROUND has been removed from the event queue.

05333a6e

2019-04-05T09:16:30

Android: add hint SDL_HINT_ANDROID_BLOCK_ON_PAUSE to set whether the event loop will block itself when the app is paused.

bfdd0b22

2019-04-04T17:01:02

Android: remove SDL_HINT_ANDROID_SEPARATE_MOUSE_AND_TOUCH java layer runs as if separate mouse and touch was 1, Use SDL_HINT_MOUSE_TOUCH_EVENTS and SDL_HINT_TOUCH_MOUSE_EVENTS for generating synthetic touch/mouse events

b45abbb2

2019-04-02T17:57:27

Bug 4576: fix warning and compile

9b3c2258

2019-04-02T17:23:55

Bug 4576: remove touch/mouse duplication for Android

d05eec72

2019-03-12T14:44:25

Fixed initial display orientation at Android app start

61827c6d

2019-01-20T12:02:12

Fixed compiler warning on Android

e5f8801f

2019-01-17T11:05:05

Android: prevent concurrency in Android_SetScreenResolution() when exiting by checking Android_Window validity - SDLThread: user application is exiting: SDL_VideoQuit() and clearing SDL_GetVideoDevice() - ActivityThread is changing orientation/size surfaceChanged() > Android_SetScreenResolution() > SDL_GetVideoDevice() - Separate function into Android_SetScreenResolution() and Android_SendResize(), formating, and mark Android_DeviceWidth/Heigh as static

e994be58

2019-01-16T10:31:51

Android: move static variable isPaused/isPausing to SDL_VideoData structure - remove unneed check to Android_Window->driverdata - add window check into context_backup/restore

dc263450

2019-01-14T23:33:48

Android: create Pause/ResumeSem semaphore at higher level than CreateWindow() - If you call onPause() before CreateWindow(), SDLThread will run in infinite loop in background. - If you call onPause() between a DestroyWindow() and a new CreateWindow(), semaphores are invalids. SDLActivity.java: the first resume() starts the SDLThread, don't call nativeResume() as it would post ResumeSem. And the first pause would automatically be resumed.

955d8789

2019-01-14T12:33:29

Android/openslES: set audio in paused/resumed state for Android event loop And also in "stopped" state before closing the device.

fb8cb95f

2019-01-12T12:12:43

Fixed compiler warning

7a1d1bae

2019-01-10T21:40:57

Android: add name for Touch devices and simplification, from bug 3958

02f292eb

2019-01-09T22:49:49

Android: add some SetError for Android_SetWindowFullscreen First error could happen if Android_SetWindowFullscreen somehow gets called between SurfaceDestroyed() and SurfaceCreated() Second error should not happen has native_window validity is guaranteed. (It would happens previously with error -19)

1803944b

2019-01-09T15:18:41

Android: concurrency issue for Android_SetWindowFullscreen() It accesses data->native_window, which can be changed by onNativeSurfacedChanged(). Currently, Android_SetWindowFullscreen() may access data->native_window after it has been released, and before a new reference is acquired. (can be reproduced by adding some SDL_Delay() in onNativeSurfacedChanged and Android_SetWindowFullscreen() ).

462e62e1

2019-01-06T20:25:54

Android: better fix for bug 3186. Run those commands from SDL thread.

e4f558a5

2019-01-05T22:46:52

Android: un-needed check of "isPausing" and minor typos

35722b64

2019-01-05T22:27:25

Android: fix wrong state after immediate sequence pause() / resume() / pause() It may happen to have the sequence pause()/resume()/pause(), before polling any events. Before, it ends in 'resumed' state because as the check is greedy. Now, always increase the Pause semaphore, and stop at each pause. It ends in 'paused' state. Related to bug 3250: set up a reconfiguration of SurfaceView holder. Turn the screen off manually before the app starts (repro rate is not 100%..)

5e13087b

2019-01-04T22:01:14

Updated copyright for 2019

2a885eb0

2019-01-04T23:39:27

Android: fixed immediate transition to pause and resume. "Pause" transition will add events: SDL_WINDOWEVENT_ENTER SDL_WINDOWEVENT_FOCUS_LOST SDL_WINDOWEVENT_MINIMIZED SDL_APP_WILL ENTER BACKGROUND SDL_APP_DID ENTER BACKGROUND "Resume" transition will add events: SDL_APP_WILL ENTER FOREGROUND SDL_APP_DID ENTER FOREGROUND SDL_WINDOWEVENT_FOCUS_GAINED SDL_WINDOWEVENT_RESTORED If Android application doesn't empty the event loop in between, it enters in "paused" state when SDL_WINDOWEVENT_RESTORED is fetched. See bug 3250 for pratical case.

cf122344

2019-01-04T23:11:21

Android: make Android_PumpEvents() more readable No behavior change in this commit.

ca184ac3

2019-01-03T23:22:50

Android: concurrency issue with egl_surface EGL_BAD_SURFACE - (bug 4142) Occurs when application goes to background: - Java activity is destroying SurfaceView holder and "egl_surface" (in onNativeSurfaceDestroyed()) - While native thread is in Android_GLES_SwapWindow(), prepared to call SDL_EGL_SwapBuffers() The error is "call to eglSwapBuffers failed, reporting an error of EGL_BAD_SURFACE" It an be reproduced easily by adding a SDL_Delay(100) at the begining of SDL_EGL_SwapBuffers(), and putting the application into background.

2e19343d

2019-01-03T20:18:29

Android: use Mutex instead of Semphore for bug 4142

23478642

2019-01-03T16:22:33

Android: prevent the error message from SDL_EGL_CreateSurface() to be masked.

cc8f1136

2019-01-03T14:18:06

Fixed bug 4142 - Concurrency issues in Android backend Use a semaphore to prevent concurrency issues between Java Activity and Native thread code, when using 'Android_Window'. (Eg. Java sending Touch events, while native code is destroying the main SDL_Window. )

d11f7615

2019-01-03T13:38:33

Android: minor preparation for bug 4142 (concurrency issues)

5dc25fef

2019-01-03T13:14:16

Android: preparation bug 4142, reduce usage of global variable Android_Window

252dc85e

2018-12-06T09:22:00

Fix warnings detected on Android build

5029d50e

2018-11-10T16:15:48

Add SDL_TouchDeviceType enum and SDL_GetTouchDeviceType(SDL_TouchID id). Touch device types include SDL_TOUCH_DEVICE_DIRECT (a touch screen with window-relative coordinates for touches), SDL_TOUCH_DEVICE_INDIRECT_ABSOLUTE (a trackpad-style device with absolute device coordinates), and SDL_TOUCH_DEVICE_INDIRECT_RELATIVE (a trackpad-style device with screen cursor-relative coordinates). Phone screens are an example of a direct device type. Mac trackpads are the indirect-absolute touch device type. The Apple TV remote is an indirect-relative touch device type.

4d771c59

2018-10-08T12:49:25

Don't flash the navigation bar when destroying a fullscreen SDL window

74638ea3

2018-09-28T20:39:57

Ensure we wait on the surface resize before returning from setting fullscreen mode.

5febdfce

2018-09-24T11:49:25

Fixed whitespace

88dfa466

2018-06-18T13:14:04

Use a blank cursor instead of PointerIcon.TYPE_NULL since that shows the default cursor on Samsung DeX

4a4bac95

2018-06-12T13:22:58

Deal with fullscreen limitations under windowed Android environments (Chromebook, DeX, etc.) (Thanks Rachel!)

fe196db7

2018-06-07T17:07:03

Track android device panel width & height as well as window surface & height. Expand SDLActivity::SDLSurface::surfaceChanged() callback to grab the panel width and height at the same time and pass that along to the native code. Only works on API 17+. Duplicates surface dimensions whenever it fails. Add Android_DeviceWidth/Android_DeviceHeight globals to native code. Disambiguate Android_ScreenWidth/Android_ScreenHeight -> Android_SurfaceWidth/Android_SurfaceHeight Use device width/height for all display mode settings.

2dedbc72

2018-06-05T12:46:11

Add Android support for relative mouse mode to SDL.

f536fbea

2018-03-16T11:08:53

Reimplemented Android cursor API support using reflection so it builds with older SDKs

e20d4173

2018-03-15T18:22:48

Added Android custom cursor implementation This is commented out in SDLActivity.java, with the note #CURSORIMPLEENTATION because it requires API 24, which is higher than the minimum required SDK

849d042f

2018-02-24T08:58:22

Fixed bug 4091 - Undefined references to Android audio functions when SDL_AUDIO_DISABLED is on Manuel Sabogal If SDL is compiled with the Audio subsystem disabled there are some undefined references to the functions ANDROIDAUDIO_ResumeDevices and ANDROIDAUDIO_PauseDevices in the file src/video/android/SDL_androidevents.c.

40b27fd5

2018-02-12T17:00:00

revert the recent typecast assignment changes (see bug #4079) also change the void* typedefs for the two vulkan function pointers added in vulkan_internal.h into generic function pointer typedefs.

6e01fbb7

2018-02-11T18:23:37

On Android show the system UI when an SDL window is windowed, hide the system UI when it's fullscreen, like we do on iOS. We're increasing the Android SDK minimum version to API 19, this doesn't increase the minimum target API, which is API 14.

90e72bf4

2018-01-30T18:08:34

Fixed ISO C99 compatibility SDL now builds with gcc 7.2 with the following command line options: -Wall -pedantic-errors -Wno-deprecated-declarations -Wno-overlength-strings --std=c99

e3cc5b2c

2018-01-03T10:03:25

4478707b

2017-10-31T13:49:59

Add SDL_GetDisplayDPI implementation on Android. (thanks Rachel!)

c8e3e0c4

2017-09-06T01:10:10

Fixed bug 3799 - SDL_CreateWindow fails with SDL_WINDOW_VULKAN (libvulkan.so.1 not found) Manuel Sabogal Android NDK defines Vulkan as libvulkan.so, not libvulkan.so.1. This is causing the program to not being able to create a window using SDL_WINDOW_VULKAN. To fix this issue just change the line http://hg.libsdl.org/SDL/file/bbaec41e93b5/src/video/android/SDL_androidvulkan.c#l53 from "libvulkan.so.1" to "libvulkan.so"

50efbda7

2017-08-28T00:43:14

Fixed mingw Windows build, since SDL_vulkan_internal.h includes windows.h

0d011ec6

2017-08-28T00:22:23

Renaming of guard header names to quiet -Wreserved-id-macro

ce2b1644

2017-08-28T00:11:38

Be clear that disabling Vulkan surface support disables the entire SDL Vulkan integration

5cd1a959

2017-08-27T23:53:09

Fixed Android build with Vulkan support

82ffabc8

2017-08-27T22:34:15

Fixed Android build

25e3a1ec

2017-08-27T22:15:57

vulkan: Initial Vulkan support! This work was done by Jacob Lifshay and Mark Callow; I'm just merging it into revision control.

de91b124

2017-08-14T06:28:21

Fixed bug 3745 - specify SDLCALL as the calling convention for API callbacks Patches contributed by Ozkan Sezer

e54eede2

2017-08-13T21:05:15

Provide the correct state of the on-screen keyboard to the API (patch from Sylvain)

6ee66139

2017-08-13T20:55:59

Fixed bug 3235 - Make the Android window creation similar to iOS' window creation Sylvain Here's a patch. It tries to get the hint first. Resizable will allow any orientation. Otherwise it uses width/height window. setOrientation method is splitted in static and non-static, so that it can be overloaded in a user subclass. Some artefact observed : surfaceChanged() can be called twice at the beginning. When the phone starts in portrait and run a landscape application.

c0862512

2017-08-12T12:24:59

Fixed bug 3128 - Removing all the static variables from android SDLActivity and accompanying JNI calls. owen I removed all the static variables from SDLActivity.java Updated all the SDL_android.c jni calls as well I added a new function to SDL_android.c/ h void Android_JNI_SeparateEventsHint(const char* c); This is called by SDL_androidtouch.c so that this TU doesn't need to call any JNI functions.

78c84e70

2017-08-12T08:06:16

Fixed part of bug 3227 - patch for multiple buttons at the same time not working Philipp Wiesemann There is another problem with the current implementation which maybe should be fixed first (to prevent some work). It was written as if it would get the number of a button from the Java side but actually it gets the state of all buttons. That is why it should not work if more than one button is pressed at once.

56363ebf

2017-08-02T10:22:48

Fixed bug 3690 - SDL2 KMS/DRM render context support Manuel The attached patch adds support for KMS/DRM context graphics. It builds with no problem on X86_64 GNU/Linux systems, provided the needed libraries are present, and on ARM GNU/Linux systems that have KMS/DRM support and a GLES2 implementation. Tested on Raspberry Pi: KMS/DRM is what the Raspberry Pi will use as default in the near future, once the propietary DispmanX API by Broadcom is overtaken by open graphics stack, it's possible to boot current Raspbian system in KMS mode by adding "dtoverlay=vc4-kms-v3d" to config.txt on Raspbian's boot partition. X86 systems use KMS right away in every current GNU/Linux system. Simple build instructions: $./autogen.sh $./configure --enable-video-kmsdrm $make

2008d866

2017-07-20T10:46:38

Fixed bug 3703 - Missing media keys support on Amazon Fire TV remote control Holger Schemel Summary: This patch adds support for key events for the "rewind" and "fast forward" media keys on the Amazon Fire TV remote control. How to reproduce the problem: Run Android build of SDL2 application on the Amazon Fire TV (tested with "stick" version) and log key events. Expected behaviour: Every key pressed on the Fire TV remote control should result in a corresponding key event (pressed/released). Observed behaviour: Of the bottom row of buttons on the Fire TV remote control, only the "play/pause" (middle) button generates a key event, while the "rewind" (left) and "fast forward" (right) buttons to not generate any event at all. The attached patch adds support for these two missing buttons/keys. Note 1: Some missing definitions were added for the already existing key codes SDL_SCANCODE_APP1 and SDL_SCANCODE_APP2 (to keep up the correct order of enumerations / array positions when adding the two new key codes). Note 2: Definitions in "scancodes_linux.h" and "scancodes_xfree86.h" (to also add support for these keys on other platforms) were added without testing. However, I was unable to find corresponding definitions for these two media keys for Windows and Mac OS X. Note 3: I have also updated the (broken) link to the USB usage page standard PDF document (comment in "include/SDL_scancode.h").

ccf0566c

2017-05-16T06:30:39

SDL - add SDL_WINDOW_VULKAN and make Android_CreateWindow only create an EGLSurface when SDL_WINDOW_VULKAN is not present. This makes it so the ANativeWindow* can be used with vkCreateAndroidSurfaceKHR, otherwise it will fail because having both an EGLSurface and VkSurfaceKHR attached to a window is not allowed according to the Vulkan spec: "In particular, only one VkSurfaceKHR can exist at a time for a given window. Similarly, a native window cannot be used by both a VkSurfaceKHR and EGLSurface simultaneously" CR: SamL

266816b4

2017-03-26T21:00:19

Removed newlines from error messages.

22161480

2017-03-14T07:22:08

Compile fix for android. "ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]" Moving some variable declarations to the top of Android_SetScreenResolution()

45b774e3

2017-01-01T18:33:28

97d05b0d

2016-12-09T05:12:27

Fixed a bunch of SwapWindow calls that needed their return value updated

26f05ecb

2016-12-02T02:25:12

Fixed missing prototypes on Android, patch from Sylvain

f674f231

2016-10-07T15:21:19

Fixed bug 2808 - Fix SDL reporting wrong window size on resume Jonas Kulla At startup time, the single android window is assigned a "windowed" (window->windowed.{w,h}) size based on the current orientation of the mobile device; this size is never updated throughout the lifetime of the app. This becomes problematic when the app is paused and then resumed in an orientation that it did not start up in. Eventually, 'SDL_OnWindowRestored()' is called, which calls 'SDL_UpdateFullscreenMode()'. This function is very problematic because it is written with a desktop monitor in mind: it tries to find a matching display mode for the windowed size, doesn't find any, and finally applies the windowed size as the fullscreen one. In the end, the windowed size is reported in a RESIZED event, which doesn't correspond to the actual surface size. To see this in action: Start an orientation aware SDL app in eg. portrait mode, suspend the app, put the device into landscape orientation and resume the app. It will erroneously render in portrait mode (until the device is rotated again).

555e6c96

2016-10-01T14:18:29

Fix SDL not resizing window when Android screen resolution changes

kc3-lang/SDL/src/video/android

src/video/android

Log