kmx git

Commit	Date	Message
d4a21f54	2018-12-02T02:43:32	cmake: Comment out some debug logging that can upset build environments. Something about the dashes, colons, numbers makes some builders believe this is an error message.
bc57ac27	2018-11-02T21:34:17	mir: Removed mir client support. Fixes Bugzilla #4288.
04761d7d	2018-10-25T11:11:02	CMakeLists.txt: set dylib version numbers properly. (bug #2915.)
c17d6299	2018-09-28T21:19:27	Mark a subsystem as dummy, not disabled, if it was intended to be compiled in. From Tom Black: I'm having problems initializing the sensor module. I'm compiling with a standard ./configure && make && sudo make install, and the module says it's enabled, but SDL_Init(SDL_INIT_EVERYTHING) is failing with SDL_GetError() returning "SDL not built with sensor support".
14d2ec80	2018-09-28T21:03:39	commit 8f4dedc039190f5e734c47dcc4fc021b5793b659 Author: Micha? Janiszewski <janisozaur+signed@gmail.com> Date: Fri Sep 28 20:38:04 2018 +0200 CMake: fix building tests on Linux In case where libunwind.h has been found, it will be used by compiler, but linker wasn't updated to reflect use of this new library.
b11c75e9	2018-09-28T13:41:04	configury, cmake: add check for endpointvolume.h : add HAVE_ENDPOINTVOLUME_H, HAVE_MMDEVICEAPI_H and HAVE_AUDIOCLIENT_H in SDL_config.h.in, SDL_config.h.cmake, SDL_config_windows.h, and in SDL_config_winrt.h.
cf7460e4	2018-09-28T11:30:50	configury, cmake: make wasapi option independent of directx.
bc6c1997	2018-09-26T10:08:14	Updated version to 2.0.9
8aaef4b9	2018-09-24T08:41:59	Fixed bug 3166 - It would be nice, if SDL would support including SDL project as a subdirectory into another CMake project Wayde Reitsma After attempting to use SDL2 in the way described in this bug, I found the main issue was the includes not being added to the compiler command. I found the issue was that the target_include_directories commands for the SDL2, SDL2-static and SDL2main targets only sets the public includes for installations using the INSTALL_INTERFACE generator expression. I have written a patch to CMakeLists.txt that fixes this issue by adding another item to the target_include_directories commands, utilizing the BUILD_INTERFACE generator expression to correctly add the include directory during builds.
c19516b5	2018-09-18T11:49:42	cmake: correctly report Vulkan support at configure time (thanks, Tiago!). Fixes Bugzilla #4262.
9753b9cc	2018-09-02T23:57:06	CMakeLists.txt: fix typo SDL_SENSORS_DISABLED -> SDL_SENSOR_DISABLED
df5d565f	2018-08-23T14:32:30	cmake: add sensor subsystem to the build.
7c3040e0	2018-08-21T12:11:34	First pass on the new SDL sensor API
58021b38	2018-08-18T17:23:40	Correct the name of the SDL shared library in CMake for Mac OS
b4fe7412	2018-08-04T11:52:46	SDL_exp
4d4bb2b0	2018-08-02T16:21:43	cmake: use WINDOWS instead of WIN32.
88577916	2018-07-01T17:01:04	make WASAPI configurable in autofoo and cmake (default is on.) closes bug #3798.
3a11bba2	2018-06-29T18:29:17	Remove "lib" prefix from DLL file on MinGW builds closes bug #4209.
5e8c8167	2018-04-15T09:37:51	Fixed bug 4135 - Broken symlink libSDL2.so since rev11940 Tiago O. Symlink points to the wrong folder, and target will always have debug postfix, so it'll be broken for other build types.
9856d967	2018-04-11T06:16:23	Fix the include path in the installed CMake target import file Previously the include path was {INSTALL_PREFIX}/include, it is now {INSTALL_PREFIX}/include/SDL2 to be consistent with the other build and package configuration systems. Fixes #4128.
6b5ed0fd	2018-04-10T08:03:54	Added debug postfix to install command and fixed library path
0a5c1065	2018-03-10T21:16:14	Fix ARM builds with MSVC
5cbb90da	2018-02-25T19:22:47	cmake: Set debug library name suffix per target instead of setting it globally. Don't add a suffix on android
6cf4d0e4	2018-02-24T08:59:58	Fixed bug 4092 - CMake support for building everything in the "test" directory Eric Wasylishen Patch to support building the tests with cmake. Disabled by default, use: "cmake .. -DSDL_TEST=YES" to enable the tests. Tested on macOS 10.13 with the ninja, makefile, and Xcode generators, and Windows 10 with the Visual Studio 2017 generator.
c329381f	2018-02-07T14:03:24	Description: fix installation of shared library for Android Author: Boris Pek <tehnick-8@yandex.ru> Last-Update: 2018-01-10
11c348b4	2018-01-17T11:53:09	SDL_log10
f1ec8a5f	2017-12-11T12:00:12	Check for immintrin.h before using it in SDL_cpuinfo.h
351d6d47	2017-12-06T12:24:32	audio: Port WASAPI to WinRT, remove XAudio2 backend. XAudio2 doesn't have capture support, so WASAPI was to replace it; the holdout was WinRT, which still needed it as its primary audio target until the WASAPI code code be made to work. The support matrix now looks like: WinXP: directsound by default, winmm as a fallback for buggy drivers. Vista+: WASAPI (directsound and winmm as fallbacks for debugging). WinRT: WASAPI
57ebc727	2017-12-04T20:35:01	Fixed bug 3975 - Add GLES2 support for macOS via ANGLE library Andrey Seems latest google angle library successfully built & tested under macOS'es. https://github.com/google/angle We need to use GLES2 to implement true cross-platform code.
a4b33d74	2017-11-20T00:03:23	Fixed bug 3959 - cmake build broken by commit 11702 (7fdbffd47c0e) due to typo Mate Nagy There is a typo in CMakeLists.txt that makes CMake exit with failure. Change that causes the problem: (Notice the double ending brackets) ${SDL2_SOURCE_DIR}/src/video/.c) + ${SDL2_SOURCE_DIR}/src/video/yuv2rgb/.c) Fix: Just remove the first ending bracket resulting in: ${SDL2_SOURCE_DIR}/src/video/.c ${SDL2_SOURCE_DIR}/src/video/yuv2rgb/.c)
a6a4e27a	2017-11-12T22:51:12	Updated SDL's YUV support, many thanks to Adrien Descamps New functions get and set the YUV colorspace conversion mode: SDL_SetYUVConversionMode() SDL_GetYUVConversionMode() SDL_GetYUVConversionModeForResolution() SDL_ConvertPixels() converts between all supported RGB and YUV formats, with SSE acceleration for converting from planar YUV formats (YV12, NV12, etc) to common RGB/RGBA formats. Added a new test program, testyuv, to verify correctness and speed of YUV conversion functionality.
2c5724ef	2017-11-04T21:58:48	Updated version to 2.0.8 since SDL_image depends on it
bcdf8b91	2017-11-04T17:35:03	Added SDL_fmod() and SDL_fmodf()
34502143	2017-11-04T15:34:14	Added float versions of SDL's math functions
f658a737	2017-10-15T21:07:01	Fixed bug 3882 - cmake fix for osx Ozkan Sezer In my cross-build environment with cmake-2.8.12.1, cmake does not add SDL_coreaudio.m to its makefiles and the result is a failure. The fix is simple: set the language to C for it as it is done at other places in CMakeLists.txt.
9c580e14	2017-10-12T13:44:28	Added functions to query and set the SDL memory allocation functions: SDL_GetMemoryFunctions() SDL_SetMemoryFunctions() SDL_GetNumAllocations()
f4cd68a5	2017-10-12T08:47:02	Fixed bug 3866 - CMake error when trying to make the 'uninstall' target when it already exists Steve Robinson In my project, the 'uninstall' target is already created by the glew library. I get this error when SDL2 tries to create it: CMake Error at _build/3rdparty/SDL2/SDL2-2.0.6/CMakeLists.txt:1816 (add_custom_target): add_custom_target cannot create target "uninstall" because another target with the same name already exists. The existing target is a custom target created in source directory "D:/Code/sdl2-tutorial/_build/3rdparty/glew/glew-2.1.0/build/cmake". See documentation for policy CMP0002 for more details. To fix it, go to the bottom of the SDL2 CMakeLists.txt file. Add an if statement to check for the existence of the target before creating it. The end result looks like this: if(NOT TARGET uninstall) configure_file( "${CMAKE_CURRENT_SOURCE_DIR}/cmake_uninstall.cmake.in" "${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake" IMMEDIATE @ONLY) add_custom_target(uninstall COMMAND ${CMAKE_COMMAND} -P ${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake) endif() This is how the glew library deals with this possibility in their CMakeLists.txt file.
0ce23a54	2017-10-12T08:08:04	Updated version to 2.0.7
827e9850	2017-10-06T16:42:43	Fixed bug 3862 - Install is broken when adding SDL2 to an existing CMake project Steve Robinson In my existing CMake project, I use add_subdirectory to add the source for SDL2. This worked fine in 2.0.5, but now in 2.0.6 when I build the INSTALL CMake target, I get this error: file INSTALL cannot find "D:/path/to/SDL2Config.cmake". Call Stack (most recent call first): 3rdparty/SDL2/cmake_install.cmake:32 (include) 3rdparty/cmake_install.cmake:36 (include) cmake_install.cmake:32 (include) To fix this, I changed line 1770 from this: ${CMAKE_SOURCE_DIR}/SDL2Config.cmake To this: ${CMAKE_CURRENT_SOURCE_DIR}/SDL2Config.cmake
260db92c	2017-09-22T16:33:34	Added stub Steam Controller sources to Android and iOS command line builds
2cdb9674	2017-09-10T10:25:36	Fixed the include path for khronos with Visual Studio
f465f24d	2017-09-09T08:36:37	Fixed bug 3760 - RWops doesn't check for integer overflow when stdio_fseek only supports 32 bits Simon Hug When RWops seeks with fseek or fseeko it uses the types long or off_t which can be 32 bits on some platforms. stdio_seek does not check if the 64-bit integer for the offset fits into a 32-bit integer. Offsets equal or larger than 2 GiB will have implementation-defined behavior and failure states would be very confusing to debug. The attached patch adds range checking by using the macros from limits.h for long type and some bit shifting for off_t because POSIX couldn't be bothered to specify min and max macros. It also defines HAVE_FSEEKI64 in SDL_config_windows.h so that the Windows function gets picked up automatically with the default config. And there's an additional error message for when ftell fails.
347fe704	2017-08-30T14:25:01	Fixed bug 3789 - Android : small clean up Sylvain Since https://hg.libsdl.org/SDL/rev/6546daa45a02 SDL_android_main.c is empty and then produce a warning nativeInit does not exist and dont need to be mark undefined
e53c5c5c	2017-08-30T00:40:06	Fix QNX build - prioritize system EGL headers over the Khronos ones
92bf6085	2017-08-29T22:04:43	Fixed bug 3616 - SDL_GL_CreateContext fails with SDL_GL_CONTEXT_DEBUG_FLAG and ANGLE/GLES 2.0 Colin Barrett Using the pre-built x86 devel libs from here: https://www.libsdl.org/release/SDL2-devel-2.0.5-VC.zip If I have: SDL_GL_SetAttribute(SDL_GL_CONTEXT_PROFILE_MASK, SDL_GL_CONTEXT_PROFILE_ES); SDL_GL_SetAttribute(SDL_GL_CONTEXT_MAJOR_VERSION, 2); SDL_GL_SetAttribute(SDL_GL_CONTEXT_MINOR_VERSION, 0); SDL_GL_SetAttribute(SDL_GL_CONTEXT_FLAGS, SDL_GL_CONTEXT_DEBUG_FLAG); and I'm using ANGLE/(a GL driver that doesn't provide an ES2 context) such that SDL_EGL_CreateContext is called by SDL_GL_CreateContext, I get the error "Could not create EGL context (context attributes are not supported)" and no context is created. Looking at the code in SDL_EGL_CreateContext - if gl_config.flags is non-zero, it looks like the code in the section guarded with "#ifdef EGL_KHR_create_context" should be executed - but it apparently isn't. Is it possible this section hasn't been compiled into the pre-built libraries? If I build SDL2.dll myself using the Visual C++ solution (VS2015 Community Update 3) then the call succeeds as I expect
c0530bcd	2017-08-28T22:42:41	We removed QuartzCore link dependency in commit 5be6badaf7e1
ce2b1644	2017-08-28T00:11:38	Be clear that disabling Vulkan surface support disables the entire SDL Vulkan integration
ea91908e	2017-08-27T23:39:38	Fixed Android ABI check to match vulkan/vk_platform.h
c722e58d	2017-08-27T23:25:12	vulkan: Include a copy of vulkan.h and vk_platform.h. Now we can provide Vulkan support in the build even if the build box doesn't have a Vulkan SDK, since we dynamically link to the library anyhow.
25e3a1ec	2017-08-27T22:15:57	vulkan: Initial Vulkan support! This work was done by Jacob Lifshay and Mark Callow; I'm just merging it into revision control.
5ca01522	2017-08-26T21:17:12	Fixed bug 3774 - Cmake build fails for Android sfalexrog Android haptic code was not added to CMakeLists.txt, leading to build failures when targeting Android platform. Attached patch adds Android haptic driver to source sets and adds configuration parameter to SDL_config.h.cmake.
f807655b	2017-08-21T11:25:04	Fixed bug 3761 - Windows non-MinGW cmake build defines HAVE_WCSLCPY and HAVE_WCSLCAT Tom Seddon https://github.com/SDL-mirror/SDL/commit/0f0ad62237fabb58d5811fe6fa59e5e5aa0e2fb5 (git head at the time of writing); Visual Studio 2015, toolset v140, Platform 10.0.14393.0, building for x64 Windows non-MinGW cmake build sets defines implying wcslcpy and wcslcat are available, but Windows doesn't have these functions. Ryan C. Gordon That's weird, these are the exact two functions that Emscripten incorrectly believed it had until we upgraded the buildbot's emsdk install. Not sure what's up with this, but it's possibly not a MingW-specific thing!
a78c20ae	2017-08-21T11:17:38	configury: check mmdeviceapi.h and audioclient.h before enabling wasapi.
2dc5d32f	2017-08-18T18:16:37	Updated version to 2.0.6
5c4a45f1	2017-08-18T20:25:14	cmake: some iOS fixes (don't link to Cocoa or Carbon frameworks). Fixes Bugzilla #3625.
f4011bf0	2017-08-18T20:00:29	cmake: added a FIXME for later. Have to figure out what cmake version fixed this and bump the minimum to that.
f75caa2f	2017-08-18T18:52:25	cmake: Fix building for macOS with Xcode generator (thanks, dungaipara!). Fixes Bugzilla #3625.
47beda97	2017-08-17T15:44:47	cmake: add core/unix sources to the build. Fixes Bugzilla #3757.
fb835f9e	2017-08-14T20:22:19	Fixed bug 2330 - Debian bug report: SDL2 X11 driver buffer overflow with large X11 file descriptor manuel.montezelo Original bug report (note that it was against 2.0.0, it might have been fixed in between): http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=733015 -------------------------------------------------------- Package: libsdl2-2.0-0 Version: 2.0.0+dfsg1-3 Severity: normal Tags: patch I have occasional crashes here caused by the X11 backend of SDL2. It seems to be caused by the X11_Pending function trying to add a high number (> 1024) file descriptor to a fd_set before doing a select on it to avoid busy waiting on X11 events. This causes a buffer overflow because the file descriptor is larger (or equal) than the limit FD_SETSIZE. Attached is a possible workaround patch. Please also keep in mind that fd_set are also used in following files which may have similar problems. src/audio/bsd/SDL_bsdaudio.c src/audio/paudio/SDL_paudio.c src/audio/qsa/SDL_qsa_audio.c src/audio/sun/SDL_sunaudio.c src/joystick/linux/SDL_sysjoystick.c -------------------------------------------------------- On Tuesday 24 December 2013 00:43:13 Sven Eckelmann wrote: > I have occasional crashes here caused by the X11 backend of SDL2. It seems > to be caused by the X11_Pending function trying to add a high number (> > 1024) file descriptor to a fd_set before doing a select on it to avoid busy > waiting on X11 events. This causes a buffer overflow because the file > descriptor is larger (or equal) than the limit FD_SETSIZE. I personally experienced this problem while hacking on the python bindings package for SDL2 [1] (while doing make runtest). But it easier to reproduce in a smaller, synthetic testcase.
f8de064c	2017-08-13T22:26:44	Added wchar.h to fix build on some platforms with new wcs* functions
f1829d95	2017-08-13T20:37:49	Added SDL_wcscmp()
75d5f343	2017-08-11T21:17:10	Forgot to add function check for fopen64 to CMake build
73c6cebb	2017-08-09T22:43:16	cmake: Pacify warning about Policy CMP0042 not being set.
496337b3	2017-08-09T19:03:10	Fixed bug 3651 - CMake build does not install CMake package configuration tschwinger@elitemail.org Most ironically, although autoconf/automake-based builds install (pretty half-assed) CMake package configuration files, they're missing in installations resulting from CMake-based builds entirely. A proper configuration file typically also loads target exports (implemented in patch 3572, also fixing this issue - see my comment on that issue for details). I believe it would be best to let the dinosaurs go extinct and redirect all build efforts to the CMake end for two reasons: 1. It potentially provides the best user experience, but you'd have to give it some love and ship with less quirky buildfiles. 2. It would force distros to build SDL via CMake and thus would ensure target exports are actually available everywhere. Various CMake patches I submitted today in summary (directly converted from the HG commits and `am`d onto a fork of a git mirror that happened to be on `tip`). https://github.com/tschw/SDL/commits/patched Fixing #2576 #3572, #3613, and this fresh ticket, which is almost entirely advertisement ;). These already do to make SDL much less of a quirky fella to have in your dependency tree...
56363ebf	2017-08-02T10:22:48	Fixed bug 3690 - SDL2 KMS/DRM render context support Manuel The attached patch adds support for KMS/DRM context graphics. It builds with no problem on X86_64 GNU/Linux systems, provided the needed libraries are present, and on ARM GNU/Linux systems that have KMS/DRM support and a GLES2 implementation. Tested on Raspberry Pi: KMS/DRM is what the Raspberry Pi will use as default in the near future, once the propietary DispmanX API by Broadcom is overtaken by open graphics stack, it's possible to boot current Raspbian system in KMS mode by adding "dtoverlay=vc4-kms-v3d" to config.txt on Raspbian's boot partition. X86 systems use KMS right away in every current GNU/Linux system. Simple build instructions: $./autogen.sh $./configure --enable-video-kmsdrm $make
3c09265d	2017-07-10T18:31:28	Fixed bug 3609 - Windows build fails due to conflicting types for 'XINPUT_GAMEPAD_EX' Ozkan Sezer (In reply to Ryan C. Gordon from comment #9) > I've put this patch in as https://hg.libsdl.org/SDL/rev/7213ae46e870 ...can > you verify this works on the latest MinGW? > > Thanks, > --ryan. This patch is wrong: the structure in question has nothing to do with any gcc version in use. I suggest reverting this adding a conigury check for it, instead. Something like the following should do it: (configure needs regenerating.)
c1cd93e5	2017-06-12T16:35:34	Fixed bug 3670 - CMake IOS haptic error
e5f4a71f	2017-06-11T16:00:45	cmake: iOS haptic section was referencing power source code (thanks, Martin!). Fixes Bugzilla #3670.
2b5a5c51	2017-06-08T22:07:55	Android build fixes -Enabling checking for GCC_ATOMICS also on clang by default. This way all Android ABIs build successfully -Android cmake: Threading was not enabled correctly -Android cmake: Timers and dynamic lib loading were not included in the sources
d9039f23	2017-06-08T13:27:58	jack: Initial shot at a JACK audio target. http://jackaudio.org/ Fixes Bugzilla #2163. (with several more commits following to improve this code.)
dc8a22cd	2017-06-06T13:39:29	cmake: don't use /NODEFAULTLIB if we are using the C runtime (thanks, Rob!). Fixes Bugzilla #3640.
11289b76	2017-06-04T21:25:57	Android cmake build fixed to work with the official android gradle plugin
a7fc2822	2017-05-24T19:56:59	audio: rename bsd target to netbsd. Apparently this is no longer a generic BSD audio target, and hasn't been for years, so rename it for NetBSD.
0e7530b0	2017-02-23T22:38:04	cmake: add WASAPI audio target to the build (thanks, Martin!). Fixes Bugzilla #3588.
5ea0c893	2017-01-24T12:20:41	CMake: fixed logic error in setting -mfpmath=387. Fixes Bugzilla #3565.
3594bf8e	2017-01-23T01:05:44	audio: Wired up new SSE code to build system.
df25258a	2017-01-06T20:43:53	Added configure and cmake support for libsamplerate
35430a73	2016-11-17T01:15:16	cpuinfo: first attempt at SDL_HasNEON() implementation.
f3502c3c	2016-10-14T01:04:21	Fixed building with cmake when fcitx isn't installed
34eebfba	2016-10-03T03:42:10	Fixed setting the version info in the shared library when using CMake Ray Molenkamp When building sdl as shared lib, the version info is lacking in the final binary. CMake gathers the right resource files into ${VERSION_SOURCES} but then doesn't do anything with them.
c9be93c6	2016-10-01T15:11:18	Fixed bug 3078 - cmake: fix sdl2.m4 install location on cross hosts Timo Gurr On cross hosts running autotools for SDL2_gfx-1.0.1 fails to find sdl2.m4: eautoreconf: running in /var/tmp/paludis/build/media-libs-SDL2_gfx-1.0.1/work/SDL2_gfx-1.0.1 ... aclocal aclocal-1.13: warning: autoconf input should be named 'configure.ac', not 'configure.in' configure.in:128: warning: macro 'AM_PATH_SDL2' not found in library libtoolize --copy --force --automake aclocal aclocal-1.13: warning: autoconf input should be named 'configure.ac', not 'configure.in' configure.in:128: warning: macro 'AM_PATH_SDL2' not found in library autoconf configure.in:128: error: possibly undefined macro: AM_PATH_SDL2 If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation. * Failed Running autoconf ! SDL2 installs it to /usr/x86_64-pc-linux-gnu/share/aclocal on cross hosts, attached patch makes use of CMAKE_INSTALL_FULL_DATAROOTDIR to support correctly installing to the arch independent location /usr/share/aclocal.
571f4ce8	2016-10-01T17:05:29	Fix CMake setting an incorrect video backend on iOS
671f2a49	2016-10-01T12:54:48	Fixed bug 3268 - CMAKE: ios fixes Martin Gerhardy ios is not properly handled in the cmake file. this patch is a start to do so - it properly builds for me with it.
bb24662c	2016-10-01T12:48:08	Fixed bug 3301 - IBus support on Linux with CMake joe.gsoc16 I recently looked into Unicode support in SDL2 and realized that SDL_TEXTEDITING doesn't get triggered at all (Japanese IME). According to others on IRC it works fine on Windows/Mac but not for me on (arch)Linux. When compiling SDL with autotools, IBus support is enabled by default but not so with CMake. I never used CMake before but got it working and also included that pkg-config determines flags for dbus (FIXME in CMakeLists).
e45698d2	2016-09-28T22:24:01	Updated version to 2.0.5 in preparation for release
e5070d20	2016-09-15T08:57:56	Fixed set of libraries needed to build on Mac OS X
93d42e2d	2016-09-15T08:46:14	Hopefully fixed the cmake build on Mac OS X
264e996e	2016-09-13T00:03:50	Fix CMake CMAKE_REQUIRED_FLAGS handling to preserve existing CMake flags required by Emscripten toolchain.
42feccea	2016-09-13T00:03:40	Include timers when using cmake (#29)
6188c334	2016-09-04T01:42:46	mac: Patched to compile with CMake project.
2c3bf665	2016-03-18T22:15:53	Windows CMake: don't try to link dxguid, it's unavailable when using Visual Studio's XP-compatible toolset.
e5d575b9	2016-01-16T21:58:49	Expose the EGL display and window for Vivante SDL windows
1615b2e2	2016-01-08T07:32:51	CMake: only set "-O3 -g" defaults if CMAKE_BUILD_TYPE wasn't set at all.
757e994e	2016-01-07T17:21:50	Fixed --enable-new-dtags check with cmake
dc5f05bb	2016-01-07T16:42:30	Use --enable-new-dtags to set RUNPATH rather than RPATH so that LD_LIBRARY_PATH is not overridden by the application.
bb1e2bd0	2016-01-05T05:44:32	CMake: Turned off Mac OS X rpath warning kludge. Apparently CMake errors out if it doesn't know this policy, and we don't otherwise require CMake 3.0 yet. Sigh.
e6e62bee	2016-01-05T01:26:32	CMake: Let static libraries optionally be built with Position Independent Code.
008a6abd	2016-01-05T01:25:54	CMake: use the old MACOSX_RPATH behavior (for now), silence the warning.
1373e890	2016-01-04T22:58:38	Try to build with GCC's -Wdeclaration-after-statement. This will help catch things that'll cause issues on C89 compilers before we send them on to fail on Buildbot.
1240f8e0	2016-01-03T20:52:44	CMake: Don't make a libSDL2.so symlink on Mac OS X (do .dylib instead).

d4a21f54

2018-12-02T02:43:32

cmake: Comment out some debug logging that can upset build environments. Something about the dashes, colons, numbers makes some builders believe this is an error message.

bc57ac27

2018-11-02T21:34:17

mir: Removed mir client support. Fixes Bugzilla #4288.

04761d7d

2018-10-25T11:11:02

CMakeLists.txt: set dylib version numbers properly. (bug #2915.)

c17d6299

2018-09-28T21:19:27

Mark a subsystem as dummy, not disabled, if it was intended to be compiled in. From Tom Black: I'm having problems initializing the sensor module. I'm compiling with a standard ./configure && make && sudo make install, and the module says it's enabled, but SDL_Init(SDL_INIT_EVERYTHING) is failing with SDL_GetError() returning "SDL not built with sensor support".

14d2ec80

2018-09-28T21:03:39

commit 8f4dedc039190f5e734c47dcc4fc021b5793b659 Author: Micha? Janiszewski <janisozaur+signed@gmail.com> Date: Fri Sep 28 20:38:04 2018 +0200 CMake: fix building tests on Linux In case where libunwind.h has been found, it will be used by compiler, but linker wasn't updated to reflect use of this new library.

b11c75e9

2018-09-28T13:41:04

configury, cmake: add check for endpointvolume.h : add HAVE_ENDPOINTVOLUME_H, HAVE_MMDEVICEAPI_H and HAVE_AUDIOCLIENT_H in SDL_config.h.in, SDL_config.h.cmake, SDL_config_windows.h, and in SDL_config_winrt.h.

cf7460e4

2018-09-28T11:30:50

configury, cmake: make wasapi option independent of directx.

bc6c1997

2018-09-26T10:08:14

Updated version to 2.0.9

8aaef4b9

2018-09-24T08:41:59

Fixed bug 3166 - It would be nice, if SDL would support including SDL project as a subdirectory into another CMake project Wayde Reitsma After attempting to use SDL2 in the way described in this bug, I found the main issue was the includes not being added to the compiler command. I found the issue was that the target_include_directories commands for the SDL2, SDL2-static and SDL2main targets only sets the public includes for installations using the INSTALL_INTERFACE generator expression. I have written a patch to CMakeLists.txt that fixes this issue by adding another item to the target_include_directories commands, utilizing the BUILD_INTERFACE generator expression to correctly add the include directory during builds.

c19516b5

2018-09-18T11:49:42

cmake: correctly report Vulkan support at configure time (thanks, Tiago!). Fixes Bugzilla #4262.

9753b9cc

2018-09-02T23:57:06

CMakeLists.txt: fix typo SDL_SENSORS_DISABLED -> SDL_SENSOR_DISABLED

df5d565f

2018-08-23T14:32:30

cmake: add sensor subsystem to the build.

7c3040e0

2018-08-21T12:11:34

First pass on the new SDL sensor API

58021b38

2018-08-18T17:23:40

Correct the name of the SDL shared library in CMake for Mac OS

b4fe7412

2018-08-04T11:52:46

SDL_exp

4d4bb2b0

2018-08-02T16:21:43

cmake: use WINDOWS instead of WIN32.

88577916

2018-07-01T17:01:04

make WASAPI configurable in autofoo and cmake (default is on.) closes bug #3798.

3a11bba2

2018-06-29T18:29:17

Remove "lib" prefix from DLL file on MinGW builds closes bug #4209.

5e8c8167

2018-04-15T09:37:51

Fixed bug 4135 - Broken symlink libSDL2.so since rev11940 Tiago O. Symlink points to the wrong folder, and target will always have debug postfix, so it'll be broken for other build types.

9856d967

2018-04-11T06:16:23

Fix the include path in the installed CMake target import file Previously the include path was {INSTALL_PREFIX}/include, it is now {INSTALL_PREFIX}/include/SDL2 to be consistent with the other build and package configuration systems. Fixes #4128.

6b5ed0fd

2018-04-10T08:03:54

Added debug postfix to install command and fixed library path

0a5c1065

2018-03-10T21:16:14

Fix ARM builds with MSVC

5cbb90da

2018-02-25T19:22:47

cmake: Set debug library name suffix per target instead of setting it globally. Don't add a suffix on android

6cf4d0e4

2018-02-24T08:59:58

Fixed bug 4092 - CMake support for building everything in the "test" directory Eric Wasylishen Patch to support building the tests with cmake. Disabled by default, use: "cmake .. -DSDL_TEST=YES" to enable the tests. Tested on macOS 10.13 with the ninja, makefile, and Xcode generators, and Windows 10 with the Visual Studio 2017 generator.

c329381f

2018-02-07T14:03:24

Description: fix installation of shared library for Android Author: Boris Pek <tehnick-8@yandex.ru> Last-Update: 2018-01-10

11c348b4

2018-01-17T11:53:09

SDL_log10

f1ec8a5f

2017-12-11T12:00:12

Check for immintrin.h before using it in SDL_cpuinfo.h

351d6d47

2017-12-06T12:24:32

audio: Port WASAPI to WinRT, remove XAudio2 backend. XAudio2 doesn't have capture support, so WASAPI was to replace it; the holdout was WinRT, which still needed it as its primary audio target until the WASAPI code code be made to work. The support matrix now looks like: WinXP: directsound by default, winmm as a fallback for buggy drivers. Vista+: WASAPI (directsound and winmm as fallbacks for debugging). WinRT: WASAPI

57ebc727

2017-12-04T20:35:01

Fixed bug 3975 - Add GLES2 support for macOS via ANGLE library Andrey Seems latest google angle library successfully built & tested under macOS'es. https://github.com/google/angle We need to use GLES2 to implement true cross-platform code.

a4b33d74

2017-11-20T00:03:23

Fixed bug 3959 - cmake build broken by commit 11702 (7fdbffd47c0e) due to typo Mate Nagy There is a typo in CMakeLists.txt that makes CMake exit with failure. Change that causes the problem: (Notice the double ending brackets) ${SDL2_SOURCE_DIR}/src/video/*.c) + ${SDL2_SOURCE_DIR}/src/video/yuv2rgb/*.c) Fix: Just remove the first ending bracket resulting in: ${SDL2_SOURCE_DIR}/src/video/*.c ${SDL2_SOURCE_DIR}/src/video/yuv2rgb/*.c)

a6a4e27a

2017-11-12T22:51:12

Updated SDL's YUV support, many thanks to Adrien Descamps New functions get and set the YUV colorspace conversion mode: SDL_SetYUVConversionMode() SDL_GetYUVConversionMode() SDL_GetYUVConversionModeForResolution() SDL_ConvertPixels() converts between all supported RGB and YUV formats, with SSE acceleration for converting from planar YUV formats (YV12, NV12, etc) to common RGB/RGBA formats. Added a new test program, testyuv, to verify correctness and speed of YUV conversion functionality.

2c5724ef

2017-11-04T21:58:48

Updated version to 2.0.8 since SDL_image depends on it

bcdf8b91

2017-11-04T17:35:03

Added SDL_fmod() and SDL_fmodf()

34502143

2017-11-04T15:34:14

Added float versions of SDL's math functions

f658a737

2017-10-15T21:07:01

Fixed bug 3882 - cmake fix for osx Ozkan Sezer In my cross-build environment with cmake-2.8.12.1, cmake does not add SDL_coreaudio.m to its makefiles and the result is a failure. The fix is simple: set the language to C for it as it is done at other places in CMakeLists.txt.

9c580e14

2017-10-12T13:44:28

Added functions to query and set the SDL memory allocation functions: SDL_GetMemoryFunctions() SDL_SetMemoryFunctions() SDL_GetNumAllocations()

f4cd68a5

2017-10-12T08:47:02

Fixed bug 3866 - CMake error when trying to make the 'uninstall' target when it already exists Steve Robinson In my project, the 'uninstall' target is already created by the glew library. I get this error when SDL2 tries to create it: CMake Error at _build/3rdparty/SDL2/SDL2-2.0.6/CMakeLists.txt:1816 (add_custom_target): add_custom_target cannot create target "uninstall" because another target with the same name already exists. The existing target is a custom target created in source directory "D:/Code/sdl2-tutorial/_build/3rdparty/glew/glew-2.1.0/build/cmake". See documentation for policy CMP0002 for more details. To fix it, go to the bottom of the SDL2 CMakeLists.txt file. Add an if statement to check for the existence of the target before creating it. The end result looks like this: if(NOT TARGET uninstall) configure_file( "${CMAKE_CURRENT_SOURCE_DIR}/cmake_uninstall.cmake.in" "${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake" IMMEDIATE @ONLY) add_custom_target(uninstall COMMAND ${CMAKE_COMMAND} -P ${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake) endif() This is how the glew library deals with this possibility in their CMakeLists.txt file.

0ce23a54

2017-10-12T08:08:04

Updated version to 2.0.7

827e9850

2017-10-06T16:42:43

Fixed bug 3862 - Install is broken when adding SDL2 to an existing CMake project Steve Robinson In my existing CMake project, I use add_subdirectory to add the source for SDL2. This worked fine in 2.0.5, but now in 2.0.6 when I build the INSTALL CMake target, I get this error: file INSTALL cannot find "D:/path/to/SDL2Config.cmake". Call Stack (most recent call first): 3rdparty/SDL2/cmake_install.cmake:32 (include) 3rdparty/cmake_install.cmake:36 (include) cmake_install.cmake:32 (include) To fix this, I changed line 1770 from this: ${CMAKE_SOURCE_DIR}/SDL2Config.cmake To this: ${CMAKE_CURRENT_SOURCE_DIR}/SDL2Config.cmake

260db92c

2017-09-22T16:33:34

Added stub Steam Controller sources to Android and iOS command line builds

2cdb9674

2017-09-10T10:25:36

Fixed the include path for khronos with Visual Studio

f465f24d

2017-09-09T08:36:37

Fixed bug 3760 - RWops doesn't check for integer overflow when stdio_fseek only supports 32 bits Simon Hug When RWops seeks with fseek or fseeko it uses the types long or off_t which can be 32 bits on some platforms. stdio_seek does not check if the 64-bit integer for the offset fits into a 32-bit integer. Offsets equal or larger than 2 GiB will have implementation-defined behavior and failure states would be very confusing to debug. The attached patch adds range checking by using the macros from limits.h for long type and some bit shifting for off_t because POSIX couldn't be bothered to specify min and max macros. It also defines HAVE_FSEEKI64 in SDL_config_windows.h so that the Windows function gets picked up automatically with the default config. And there's an additional error message for when ftell fails.

347fe704

2017-08-30T14:25:01

Fixed bug 3789 - Android : small clean up Sylvain Since https://hg.libsdl.org/SDL/rev/6546daa45a02 SDL_android_main.c is empty and then produce a warning nativeInit does not exist and dont need to be mark undefined

e53c5c5c

2017-08-30T00:40:06

Fix QNX build - prioritize system EGL headers over the Khronos ones

92bf6085

2017-08-29T22:04:43

Fixed bug 3616 - SDL_GL_CreateContext fails with SDL_GL_CONTEXT_DEBUG_FLAG and ANGLE/GLES 2.0 Colin Barrett Using the pre-built x86 devel libs from here: https://www.libsdl.org/release/SDL2-devel-2.0.5-VC.zip If I have: SDL_GL_SetAttribute(SDL_GL_CONTEXT_PROFILE_MASK, SDL_GL_CONTEXT_PROFILE_ES); SDL_GL_SetAttribute(SDL_GL_CONTEXT_MAJOR_VERSION, 2); SDL_GL_SetAttribute(SDL_GL_CONTEXT_MINOR_VERSION, 0); SDL_GL_SetAttribute(SDL_GL_CONTEXT_FLAGS, SDL_GL_CONTEXT_DEBUG_FLAG); and I'm using ANGLE/(a GL driver that doesn't provide an ES2 context) such that SDL_EGL_CreateContext is called by SDL_GL_CreateContext, I get the error "Could not create EGL context (context attributes are not supported)" and no context is created. Looking at the code in SDL_EGL_CreateContext - if gl_config.flags is non-zero, it looks like the code in the section guarded with "#ifdef EGL_KHR_create_context" should be executed - but it apparently isn't. Is it possible this section hasn't been compiled into the pre-built libraries? If I build SDL2.dll myself using the Visual C++ solution (VS2015 Community Update 3) then the call succeeds as I expect

c0530bcd

2017-08-28T22:42:41

We removed QuartzCore link dependency in commit 5be6badaf7e1

ce2b1644

2017-08-28T00:11:38

Be clear that disabling Vulkan surface support disables the entire SDL Vulkan integration

ea91908e

2017-08-27T23:39:38

Fixed Android ABI check to match vulkan/vk_platform.h

c722e58d

2017-08-27T23:25:12

vulkan: Include a copy of vulkan.h and vk_platform.h. Now we can provide Vulkan support in the build even if the build box doesn't have a Vulkan SDK, since we dynamically link to the library anyhow.

25e3a1ec

2017-08-27T22:15:57

vulkan: Initial Vulkan support! This work was done by Jacob Lifshay and Mark Callow; I'm just merging it into revision control.

5ca01522

2017-08-26T21:17:12

Fixed bug 3774 - Cmake build fails for Android sfalexrog Android haptic code was not added to CMakeLists.txt, leading to build failures when targeting Android platform. Attached patch adds Android haptic driver to source sets and adds configuration parameter to SDL_config.h.cmake.

f807655b

2017-08-21T11:25:04

Fixed bug 3761 - Windows non-MinGW cmake build defines HAVE_WCSLCPY and HAVE_WCSLCAT Tom Seddon https://github.com/SDL-mirror/SDL/commit/0f0ad62237fabb58d5811fe6fa59e5e5aa0e2fb5 (git head at the time of writing); Visual Studio 2015, toolset v140, Platform 10.0.14393.0, building for x64 Windows non-MinGW cmake build sets defines implying wcslcpy and wcslcat are available, but Windows doesn't have these functions. Ryan C. Gordon That's weird, these are the exact two functions that Emscripten incorrectly believed it had until we upgraded the buildbot's emsdk install. Not sure what's up with this, but it's possibly not a MingW-specific thing!

a78c20ae

2017-08-21T11:17:38

configury: check mmdeviceapi.h and audioclient.h before enabling wasapi.

2dc5d32f

2017-08-18T18:16:37

Updated version to 2.0.6

5c4a45f1

2017-08-18T20:25:14

cmake: some iOS fixes (don't link to Cocoa or Carbon frameworks). Fixes Bugzilla #3625.

f4011bf0

2017-08-18T20:00:29

cmake: added a FIXME for later. Have to figure out what cmake version fixed this and bump the minimum to that.

f75caa2f

2017-08-18T18:52:25

cmake: Fix building for macOS with Xcode generator (thanks, dungaipara!). Fixes Bugzilla #3625.

47beda97

2017-08-17T15:44:47

cmake: add core/unix sources to the build. Fixes Bugzilla #3757.

fb835f9e

2017-08-14T20:22:19

Fixed bug 2330 - Debian bug report: SDL2 X11 driver buffer overflow with large X11 file descriptor manuel.montezelo Original bug report (note that it was against 2.0.0, it might have been fixed in between): http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=733015 -------------------------------------------------------- Package: libsdl2-2.0-0 Version: 2.0.0+dfsg1-3 Severity: normal Tags: patch I have occasional crashes here caused by the X11 backend of SDL2. It seems to be caused by the X11_Pending function trying to add a high number (> 1024) file descriptor to a fd_set before doing a select on it to avoid busy waiting on X11 events. This causes a buffer overflow because the file descriptor is larger (or equal) than the limit FD_SETSIZE. Attached is a possible workaround patch. Please also keep in mind that fd_set are also used in following files which may have similar problems. src/audio/bsd/SDL_bsdaudio.c src/audio/paudio/SDL_paudio.c src/audio/qsa/SDL_qsa_audio.c src/audio/sun/SDL_sunaudio.c src/joystick/linux/SDL_sysjoystick.c -------------------------------------------------------- On Tuesday 24 December 2013 00:43:13 Sven Eckelmann wrote: > I have occasional crashes here caused by the X11 backend of SDL2. It seems > to be caused by the X11_Pending function trying to add a high number (> > 1024) file descriptor to a fd_set before doing a select on it to avoid busy > waiting on X11 events. This causes a buffer overflow because the file > descriptor is larger (or equal) than the limit FD_SETSIZE. I personally experienced this problem while hacking on the python bindings package for SDL2 [1] (while doing make runtest). But it easier to reproduce in a smaller, synthetic testcase.

f8de064c

2017-08-13T22:26:44

Added wchar.h to fix build on some platforms with new wcs* functions

f1829d95

2017-08-13T20:37:49

Added SDL_wcscmp()

75d5f343

2017-08-11T21:17:10

Forgot to add function check for fopen64 to CMake build

73c6cebb

2017-08-09T22:43:16

cmake: Pacify warning about Policy CMP0042 not being set.

496337b3

2017-08-09T19:03:10

Fixed bug 3651 - CMake build does not install CMake package configuration tschwinger@elitemail.org Most ironically, although autoconf/automake-based builds install (pretty half-assed) CMake package configuration files, they're missing in installations resulting from CMake-based builds entirely. A proper configuration file typically also loads target exports (implemented in patch 3572, also fixing this issue - see my comment on that issue for details). I believe it would be best to let the dinosaurs go extinct and redirect all build efforts to the CMake end for two reasons: 1. It potentially provides the best user experience, but you'd have to give it some love and ship with less quirky buildfiles. 2. It would force distros to build SDL via CMake and thus would ensure target exports are actually available everywhere. Various CMake patches I submitted today in summary (directly converted from the HG commits and `am`d onto a fork of a git mirror that happened to be on `tip`). https://github.com/tschw/SDL/commits/patched Fixing #2576 #3572, #3613, and this fresh ticket, which is almost entirely advertisement ;). These already do to make SDL much less of a quirky fella to have in your dependency tree...

56363ebf

2017-08-02T10:22:48

Fixed bug 3690 - SDL2 KMS/DRM render context support Manuel The attached patch adds support for KMS/DRM context graphics. It builds with no problem on X86_64 GNU/Linux systems, provided the needed libraries are present, and on ARM GNU/Linux systems that have KMS/DRM support and a GLES2 implementation. Tested on Raspberry Pi: KMS/DRM is what the Raspberry Pi will use as default in the near future, once the propietary DispmanX API by Broadcom is overtaken by open graphics stack, it's possible to boot current Raspbian system in KMS mode by adding "dtoverlay=vc4-kms-v3d" to config.txt on Raspbian's boot partition. X86 systems use KMS right away in every current GNU/Linux system. Simple build instructions: $./autogen.sh $./configure --enable-video-kmsdrm $make

3c09265d

2017-07-10T18:31:28

Fixed bug 3609 - Windows build fails due to conflicting types for 'XINPUT_GAMEPAD_EX' Ozkan Sezer (In reply to Ryan C. Gordon from comment #9) > I've put this patch in as https://hg.libsdl.org/SDL/rev/7213ae46e870 ...can > you verify this works on the latest MinGW? > > Thanks, > --ryan. This patch is wrong: the structure in question has nothing to do with any gcc version in use. I suggest reverting this adding a conigury check for it, instead. Something like the following should do it: (configure needs regenerating.)

c1cd93e5

2017-06-12T16:35:34

Fixed bug 3670 - CMake IOS haptic error

e5f4a71f

2017-06-11T16:00:45

cmake: iOS haptic section was referencing power source code (thanks, Martin!). Fixes Bugzilla #3670.

2b5a5c51

2017-06-08T22:07:55

Android build fixes -Enabling checking for GCC_ATOMICS also on clang by default. This way all Android ABIs build successfully -Android cmake: Threading was not enabled correctly -Android cmake: Timers and dynamic lib loading were not included in the sources

d9039f23

2017-06-08T13:27:58

jack: Initial shot at a JACK audio target. http://jackaudio.org/ Fixes Bugzilla #2163. (with several more commits following to improve this code.)

dc8a22cd

2017-06-06T13:39:29

cmake: don't use /NODEFAULTLIB if we are using the C runtime (thanks, Rob!). Fixes Bugzilla #3640.

11289b76

2017-06-04T21:25:57

Android cmake build fixed to work with the official android gradle plugin

a7fc2822

2017-05-24T19:56:59

audio: rename bsd target to netbsd. Apparently this is no longer a generic BSD audio target, and hasn't been for years, so rename it for NetBSD.

0e7530b0

2017-02-23T22:38:04

cmake: add WASAPI audio target to the build (thanks, Martin!). Fixes Bugzilla #3588.

5ea0c893

2017-01-24T12:20:41

CMake: fixed logic error in setting -mfpmath=387. Fixes Bugzilla #3565.

3594bf8e

2017-01-23T01:05:44

audio: Wired up new SSE code to build system.

df25258a

2017-01-06T20:43:53

Added configure and cmake support for libsamplerate

35430a73

2016-11-17T01:15:16

cpuinfo: first attempt at SDL_HasNEON() implementation.

f3502c3c

2016-10-14T01:04:21

Fixed building with cmake when fcitx isn't installed

34eebfba

2016-10-03T03:42:10

Fixed setting the version info in the shared library when using CMake Ray Molenkamp When building sdl as shared lib, the version info is lacking in the final binary. CMake gathers the right resource files into ${VERSION_SOURCES} but then doesn't do anything with them.

c9be93c6

2016-10-01T15:11:18

Fixed bug 3078 - cmake: fix sdl2.m4 install location on cross hosts Timo Gurr On cross hosts running autotools for SDL2_gfx-1.0.1 fails to find sdl2.m4: eautoreconf: running in /var/tmp/paludis/build/media-libs-SDL2_gfx-1.0.1/work/SDL2_gfx-1.0.1 ... aclocal aclocal-1.13: warning: autoconf input should be named 'configure.ac', not 'configure.in' configure.in:128: warning: macro 'AM_PATH_SDL2' not found in library libtoolize --copy --force --automake aclocal aclocal-1.13: warning: autoconf input should be named 'configure.ac', not 'configure.in' configure.in:128: warning: macro 'AM_PATH_SDL2' not found in library autoconf configure.in:128: error: possibly undefined macro: AM_PATH_SDL2 If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation. * Failed Running autoconf ! SDL2 installs it to /usr/x86_64-pc-linux-gnu/share/aclocal on cross hosts, attached patch makes use of CMAKE_INSTALL_FULL_DATAROOTDIR to support correctly installing to the arch independent location /usr/share/aclocal.

571f4ce8

2016-10-01T17:05:29

Fix CMake setting an incorrect video backend on iOS

671f2a49

2016-10-01T12:54:48

Fixed bug 3268 - CMAKE: ios fixes Martin Gerhardy ios is not properly handled in the cmake file. this patch is a start to do so - it properly builds for me with it.

bb24662c

2016-10-01T12:48:08

Fixed bug 3301 - IBus support on Linux with CMake joe.gsoc16 I recently looked into Unicode support in SDL2 and realized that SDL_TEXTEDITING doesn't get triggered at all (Japanese IME). According to others on IRC it works fine on Windows/Mac but not for me on (arch)Linux. When compiling SDL with autotools, IBus support is enabled by default but not so with CMake. I never used CMake before but got it working and also included that pkg-config determines flags for dbus (FIXME in CMakeLists).

e45698d2

2016-09-28T22:24:01

Updated version to 2.0.5 in preparation for release

e5070d20

2016-09-15T08:57:56

Fixed set of libraries needed to build on Mac OS X

93d42e2d

2016-09-15T08:46:14

Hopefully fixed the cmake build on Mac OS X

264e996e

2016-09-13T00:03:50

Fix CMake CMAKE_REQUIRED_FLAGS handling to preserve existing CMake flags required by Emscripten toolchain.

42feccea

2016-09-13T00:03:40

Include timers when using cmake (#29)

6188c334

2016-09-04T01:42:46

mac: Patched to compile with CMake project.

2c3bf665

2016-03-18T22:15:53

Windows CMake: don't try to link dxguid, it's unavailable when using Visual Studio's XP-compatible toolset.

e5d575b9

2016-01-16T21:58:49

Expose the EGL display and window for Vivante SDL windows

1615b2e2

2016-01-08T07:32:51

CMake: only set "-O3 -g" defaults if CMAKE_BUILD_TYPE wasn't set at all.

757e994e

2016-01-07T17:21:50

Fixed --enable-new-dtags check with cmake

dc5f05bb

2016-01-07T16:42:30

Use --enable-new-dtags to set RUNPATH rather than RPATH so that LD_LIBRARY_PATH is not overridden by the application.

bb1e2bd0

2016-01-05T05:44:32

CMake: Turned off Mac OS X rpath warning kludge. Apparently CMake errors out if it doesn't know this policy, and we don't otherwise require CMake 3.0 yet. Sigh.

e6e62bee

2016-01-05T01:26:32

CMake: Let static libraries optionally be built with Position Independent Code.

008a6abd

2016-01-05T01:25:54

CMake: use the old MACOSX_RPATH behavior (for now), silence the warning.

1373e890

2016-01-04T22:58:38

Try to build with GCC's -Wdeclaration-after-statement. This will help catch things that'll cause issues on C89 compilers before we send them on to fail on Buildbot.

1240f8e0

2016-01-03T20:52:44

CMake: Don't make a libSDL2.so symlink on Mac OS X (do .dylib instead).

kc3-lang/SDL/CMakeLists.txt

CMakeLists.txt

Log