kmx git

Commit	Date	Message
a6a4e27a	2017-11-12T22:51:12	Updated SDL's YUV support, many thanks to Adrien Descamps New functions get and set the YUV colorspace conversion mode: SDL_SetYUVConversionMode() SDL_GetYUVConversionMode() SDL_GetYUVConversionModeForResolution() SDL_ConvertPixels() converts between all supported RGB and YUV formats, with SSE acceleration for converting from planar YUV formats (YV12, NV12, etc) to common RGB/RGBA formats. Added a new test program, testyuv, to verify correctness and speed of YUV conversion functionality.
bbb22a75	2017-11-05T01:17:24	Updated version to 2.0.8 since SDL_image depends on it
bcdf8b91	2017-11-04T17:35:03	Added SDL_fmod() and SDL_fmodf()
34502143	2017-11-04T15:34:14	Added float versions of SDL's math functions
9c580e14	2017-10-12T13:44:28	Added functions to query and set the SDL memory allocation functions: SDL_GetMemoryFunctions() SDL_SetMemoryFunctions() SDL_GetNumAllocations()
0ce23a54	2017-10-12T08:08:04	Updated version to 2.0.7
e564da78	2017-09-29T10:15:44	revert files I didnt mean to commit!
e27f12e0	2017-09-29T10:07:37	wayland: Fix bug 3814 -Wmissing-field-initializers
260db92c	2017-09-22T16:33:34	Added stub Steam Controller sources to Android and iOS command line builds
2079ec99	2017-09-22T08:30:58	Removed non-existent files
d8286479	2017-09-22T08:30:52	Added stubs for simple Steam Controller support
f465f24d	2017-09-09T08:36:37	Fixed bug 3760 - RWops doesn't check for integer overflow when stdio_fseek only supports 32 bits Simon Hug When RWops seeks with fseek or fseeko it uses the types long or off_t which can be 32 bits on some platforms. stdio_seek does not check if the 64-bit integer for the offset fits into a 32-bit integer. Offsets equal or larger than 2 GiB will have implementation-defined behavior and failure states would be very confusing to debug. The attached patch adds range checking by using the macros from limits.h for long type and some bit shifting for off_t because POSIX couldn't be bothered to specify min and max macros. It also defines HAVE_FSEEKI64 in SDL_config_windows.h so that the Windows function gets picked up automatically with the default config. And there's an additional error message for when ftell fails.
222d25ad	2017-09-08T22:21:01	Fixed bug 3805 - Why is there no --enable-video-rpi option in configure? Andreas Falkenhahn When compiling SDL for the Raspberry Pi, I have to use the --host parameter to enable compilation of the native Raspberry Pi video driver, like so: --host=arm-raspberry-linux-gnueabihf It took me a while to figure out that this was necessary in order to have the native Raspberry Pi video driver compiled in. I think it would be better if there was an option like --enable-video-rpi that could be passed to configure and that would also show up when saying configure --help. Currently, it?s rather difficult to figure out that you have to use the --host parameter with arm-raspberry-linux-gnueabihf in order to get Raspberry Pi video support. It?s also somewhat inconsistent because most other video drivers can in fact be enabled/disabled through specific configure parameters but there is no such parameter for the native Raspberry Pi video driver.
d51dc737	2017-09-06T01:14:23	Fixed bug 3797 - configure check for float.h Ozkan Sezer Cmake checks for float.h, but configure does not: the attached patch adds float.h to checked headers in configury, and it adds the missing HAVE_FLOAT_H macro to SDL_config.h.cmake and SDL_config.h.in. In SDL_config_macosx.h and SDL_config_windows.h, defined HAVE_FLOAT_H as 1, where I know that it's true.
e53c5c5c	2017-08-30T00:40:06	Fix QNX build - prioritize system EGL headers over the Khronos ones
92bf6085	2017-08-29T22:04:43	Fixed bug 3616 - SDL_GL_CreateContext fails with SDL_GL_CONTEXT_DEBUG_FLAG and ANGLE/GLES 2.0 Colin Barrett Using the pre-built x86 devel libs from here: https://www.libsdl.org/release/SDL2-devel-2.0.5-VC.zip If I have: SDL_GL_SetAttribute(SDL_GL_CONTEXT_PROFILE_MASK, SDL_GL_CONTEXT_PROFILE_ES); SDL_GL_SetAttribute(SDL_GL_CONTEXT_MAJOR_VERSION, 2); SDL_GL_SetAttribute(SDL_GL_CONTEXT_MINOR_VERSION, 0); SDL_GL_SetAttribute(SDL_GL_CONTEXT_FLAGS, SDL_GL_CONTEXT_DEBUG_FLAG); and I'm using ANGLE/(a GL driver that doesn't provide an ES2 context) such that SDL_EGL_CreateContext is called by SDL_GL_CreateContext, I get the error "Could not create EGL context (context attributes are not supported)" and no context is created. Looking at the code in SDL_EGL_CreateContext - if gl_config.flags is non-zero, it looks like the code in the section guarded with "#ifdef EGL_KHR_create_context" should be executed - but it apparently isn't. Is it possible this section hasn't been compiled into the pre-built libraries? If I build SDL2.dll myself using the Visual C++ solution (VS2015 Community Update 3) then the call succeeds as I expect
c0530bcd	2017-08-28T22:42:41	We removed QuartzCore link dependency in commit 5be6badaf7e1
8ac85744	2017-08-28T22:36:45	Fixed Vulkan configure check for Android and added one for Mac OS X
dbb0a2aa	2017-08-28T14:34:15	Removed the need for libSDL2main.a on Android, and separated JNI initialization out for other integrations
ce2b1644	2017-08-28T00:11:38	Be clear that disabling Vulkan surface support disables the entire SDL Vulkan integration
c722e58d	2017-08-27T23:25:12	vulkan: Include a copy of vulkan.h and vk_platform.h. Now we can provide Vulkan support in the build even if the build box doesn't have a Vulkan SDK, since we dynamically link to the library anyhow.
25e3a1ec	2017-08-27T22:15:57	vulkan: Initial Vulkan support! This work was done by Jacob Lifshay and Mark Callow; I'm just merging it into revision control.
f807655b	2017-08-21T11:25:04	Fixed bug 3761 - Windows non-MinGW cmake build defines HAVE_WCSLCPY and HAVE_WCSLCAT Tom Seddon https://github.com/SDL-mirror/SDL/commit/0f0ad62237fabb58d5811fe6fa59e5e5aa0e2fb5 (git head at the time of writing); Visual Studio 2015, toolset v140, Platform 10.0.14393.0, building for x64 Windows non-MinGW cmake build sets defines implying wcslcpy and wcslcat are available, but Windows doesn't have these functions. Ryan C. Gordon That's weird, these are the exact two functions that Emscripten incorrectly believed it had until we upgraded the buildbot's emsdk install. Not sure what's up with this, but it's possibly not a MingW-specific thing!
a78c20ae	2017-08-21T11:17:38	configury: check mmdeviceapi.h and audioclient.h before enabling wasapi.
2dc5d32f	2017-08-18T18:16:37	Updated version to 2.0.6
bcf0e071	2017-08-18T17:29:44	Added WASAPI audio target to autoconf build process
8816bb08	2017-08-18T19:53:40	configure: Apple platforms don't need to build with -fpascal-strings anymore.
677b2e57	2017-08-18T19:52:58	configure: mac and iOS should compile core/unix/*.c macOS currently needs this if you build with X11 support. iOS doesn't (currently), but it doesn't hurt to compile it in case we do something Unixy on that platform later on.
fb835f9e	2017-08-14T20:22:19	Fixed bug 2330 - Debian bug report: SDL2 X11 driver buffer overflow with large X11 file descriptor manuel.montezelo Original bug report (note that it was against 2.0.0, it might have been fixed in between): http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=733015 -------------------------------------------------------- Package: libsdl2-2.0-0 Version: 2.0.0+dfsg1-3 Severity: normal Tags: patch I have occasional crashes here caused by the X11 backend of SDL2. It seems to be caused by the X11_Pending function trying to add a high number (> 1024) file descriptor to a fd_set before doing a select on it to avoid busy waiting on X11 events. This causes a buffer overflow because the file descriptor is larger (or equal) than the limit FD_SETSIZE. Attached is a possible workaround patch. Please also keep in mind that fd_set are also used in following files which may have similar problems. src/audio/bsd/SDL_bsdaudio.c src/audio/paudio/SDL_paudio.c src/audio/qsa/SDL_qsa_audio.c src/audio/sun/SDL_sunaudio.c src/joystick/linux/SDL_sysjoystick.c -------------------------------------------------------- On Tuesday 24 December 2013 00:43:13 Sven Eckelmann wrote: > I have occasional crashes here caused by the X11 backend of SDL2. It seems > to be caused by the X11_Pending function trying to add a high number (> > 1024) file descriptor to a fd_set before doing a select on it to avoid busy > waiting on X11 events. This causes a buffer overflow because the file > descriptor is larger (or equal) than the limit FD_SETSIZE. I personally experienced this problem while hacking on the python bindings package for SDL2 [1] (while doing make runtest). But it easier to reproduce in a smaller, synthetic testcase.
f8de064c	2017-08-13T22:26:44	Added wchar.h to fix build on some platforms with new wcs* functions
f1829d95	2017-08-13T20:37:49	Added SDL_wcscmp()
df2d2994	2017-08-13T18:12:06	Fixed bug 2812 - Make libSDL2main.a usable on Android via a dummy symbol Jonas Kulla This eliminates the need to manually compile in SDL_main_android.c. Instead, add "-lSDL2main -Wl,-u,SDL_main_dummy" when linking. I don't know how the nkd-build process works, but unless it was for some reason linking libSDL2main.a it should be unaffected.
e4124ff5	2017-08-12T15:00:33	Fixed bug 3208 - Minor improvements to the configure script Rafal Muzylo "if we're already using libtool, why aren't we using it ?"; they've been inspired by the fact, that at that mark, neither libSDL2_test.a nor libSDL2main.a were being built correctly (not sure if it's fully broken or just because I've tested the out-of-tree build)
a48c9e6d	2017-08-11T21:16:33	Fixed bug 3292 - SDL_rwops and 64-bit file I/O Juha Niemim? On AmigaOS 4 platform with Newlib 'C' library, there is a problem with failing fseeko64. This seemed to be caused by using fopen instead of fopen64.
2d67381a	2017-08-09T18:41:59	haiku: non-x86 spins use a normal libstdc++ filename. Handle the differences. Fixes Bugzilla #3730.
e9ae411a	2017-08-04T23:01:01	Updated generated configure script.
3c09265d	2017-07-10T18:31:28	Fixed bug 3609 - Windows build fails due to conflicting types for 'XINPUT_GAMEPAD_EX' Ozkan Sezer (In reply to Ryan C. Gordon from comment #9) > I've put this patch in as https://hg.libsdl.org/SDL/rev/7213ae46e870 ...can > you verify this works on the latest MinGW? > > Thanks, > --ryan. This patch is wrong: the structure in question has nothing to do with any gcc version in use. I suggest reverting this adding a conigury check for it, instead. Something like the following should do it: (configure needs regenerating.)
88100237	2017-07-09T23:00:43	Updated generated configure script.
121d7d25	2017-06-11T22:30:06	directfb: Fixed configure script not finding shared objects for dynamic loading.
d9039f23	2017-06-08T13:27:58	jack: Initial shot at a JACK audio target. http://jackaudio.org/ Fixes Bugzilla #2163. (with several more commits following to improve this code.)
a7fc2822	2017-05-24T19:56:59	audio: rename bsd target to netbsd. Apparently this is no longer a generic BSD audio target, and hasn't been for years, so rename it for NetBSD.
d00dfc43	2017-05-02T11:31:14	Fixed another AC_DEFINE.
3f7f65a3	2017-05-02T11:16:58	Fixed configure script. The Haiku patch would define some HAVE_* things to /**/ instead of 1, breaking the build for various things.
619ab7a2	2017-05-01T18:39:05	haiku: Various fixes from haikuports. Based on patch here: https://github.com/haikuports/haikuports/blob/master/media-libs/libsdl2/patches/libsdl2-2.0.5.patchset
06d6ada8	2017-04-02T21:33:02	Updated generated configure script.
94a69443	2017-03-01T15:05:54	mistake: Revert the files that I did not mean to commit
7bbb13ea	2017-03-01T14:50:59	* Some refactoring and bug fixes. Thanks Micha? Kuchta!
32ef85b5	2017-02-26T01:03:39	Updated generated configure script.
43dbbd63	2017-02-20T10:55:49	Updated iOS fat build
1b3327ed	2017-01-24T16:18:25	configure: report libsamplerate support status.
36cb05a8	2017-01-24T12:20:12	configure.in: Check for sse3 too when setting -mfpmath=387.
3594bf8e	2017-01-23T01:05:44	audio: Wired up new SSE code to build system.
e0a40fb6	2017-01-09T02:54:42	Implemented full evdev keyboard text support This is based on the Linux kernel driver, and has fallback mapping tables in case we aren't connected to a virtual terminal.
25b47ea3	2017-01-08T10:52:02	Fixed attempting to dynamically load libsamplerate when shared object loading is disabled. Thanks to Ozkan Sezer for pointing this out
df25258a	2017-01-06T20:43:53	Added configure and cmake support for libsamplerate
1e8f074c	2016-11-29T05:34:20	Avoid conflicts with multiple versions of udev by first trying the library that is linked with the executable, if any, and then picking the one that is in the build environment. This fixes joystick detection for applications using the Steam Linux Runtime
2a5fab63	2016-11-19T23:27:51	Updated configure script.
ac74e16c	2016-11-10T17:19:34	Standardized the format of the SDL joystick GUID and added functions to retrieve the USB VID/PID from a joystick and game controller.
077d6e64	2016-11-01T10:42:35	Fixed bug with udev support reporting Joshua Bodine I'm going to reopen this because configure should still accurately report whether libudev will be used. Right now it just tests whether it's enabled as an argument, not whether configure was successful in finding it.
9a8642bd	2016-11-01T10:30:46	Fixed bug 3478 - Patch Haiku to use dlopen instead of load_add_on Kai Sterker SDL2 on Haiku so far uses Haiku-specific APIs for loading dynamic objects as add-ons, instead of using dlopen to load them as libraries. This, for example, leads to SDL_mixer not being able to load its audio backends, when compiled with standard settings. As discussed at https://www.freelists.org/post/haikuports/SDL2-mixer-ogg-music-not-playing-and-other-stuff,2 , the best way to deal with this would be using dlopen instead of load_add_on. The following patch implements this change by dropping the Haiku-specific bits and using dlopen instead.
808c75d1	2016-10-07T18:57:40	Fixed bug 2824 - Add Fcitx Input Method Support Weitian Leung Just moved ibus direct call to SDL_IME_* related functions, and adds fcitx IME support (uses DBus, too), enable with env: SDL_IM_MODULE=fcitx (ibus still the default one)
abefe785	2016-10-07T18:03:08	Fixed bug 3043 - fix alsa configury and cmake checks Ozkan Sezer SDL's alsa uses snd_pcm_recover() which has been available only since alsa-lib-1.0.11.
e45698d2	2016-09-28T22:24:01	Updated version to 2.0.5 in preparation for release
f89857f1	2016-09-26T23:09:34	Updated configure script.
e5070d20	2016-09-15T08:57:56	Fixed set of libraries needed to build on Mac OS X
93d42e2d	2016-09-15T08:46:14	Hopefully fixed the cmake build on Mac OS X
8c01d588	2016-09-15T08:29:20	Fixed building new coreaudio driver on Mac OS X
1428bab3	2016-09-01T16:01:54	Fixes building SDL on Ubuntu 16.04 with Mir headers installed
f11a4409	2016-09-01T01:26:56	wayland: Add support for relative mouse mode, by Jonas ?dahl <jadahl@gmail.com> Generate the C protocol files from the protocol XML files installed by wayland-protocols, and use them to implement support for relative pointer motions and pointer locking. Note that at the time, the protocol is unstable and may change in the future. Any future breaking changes will, however, fail gracefully and result in no regressions compared to before this patch.
19d3500a	2016-06-23T18:39:05	wayland: Build own version of core protocol Since we are loading shared objects dynamically, build our own version of the core protocol symbols, so that we in the future can include protocol extensions.
697984df	2016-02-21T19:21:21	Regenerated configure script with Mir changes.
dc5f05bb	2016-01-07T16:42:30	Use --enable-new-dtags to set RUNPATH rather than RPATH so that LD_LIBRARY_PATH is not overridden by the application.
1373e890	2016-01-04T22:58:38	Try to build with GCC's -Wdeclaration-after-statement. This will help catch things that'll cause issues on C89 compilers before we send them on to fail on Buildbot.
9d789ebe	2015-12-29T19:14:19	Updated configure script.
2bf6f1bc	2015-09-20T23:08:36	Added initial support for MFi game controllers on iOS.
bf9bd59c	2015-06-29T22:24:00	Fixed bug 2464 - Configure a sdl2-config.cmake.in together with sdl2.pc.in Leonardo Despite having a CMakeLists.txt file, SDL2 seems to be mainly built using the autotools system by package-managers. It is nice to have it but it is only useful if you are building SDL2 by yourself. People that want to use CMake to find their already-installed SDL2 are using a FindSDL2.cmake module based on the old FindSDL.cmake. This is not deprecated but it is discouraged by the CMake devs (see http://www.cmake.org/Bug/view.php?id=14826), as these modules needs maintainers to be included in the official CMake installation. To fix that, SDL and its accompanying libraries could configure a simple sdl2-config.cmake file, much like it does with sdl2.pc.in. We don't need to configure a full sdl2-config.cmake as in this post, http://forums.libsdl.org/viewtopic.php?t=10068&sid=ccf8abbf0d73fb03ae9cded991e60959 (because it depends on it being built with CMake). Using something as simple as http://www.cmake.org/Wiki/CMake/Tutorials/Packaging#Package_Configuration_Files is deemed enough. Here is another: http://quickgit.kde.org/?p=prison.git&a=blob&f=lib%2Fprison%2FPrisonConfig.cmake.in
0e45984f	2015-06-21T17:33:46	Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
fb5732dc	2015-06-19T23:53:33	GCC is warning about global functions with the same name as variables in the code, when using -Wshadow. This is a little ridiculous because we have no idea what functions a given platform will provide, so we'll disable -Wshadow for now.
8283abdb	2015-06-08T01:17:58	Updated configure script.
2a757825	2015-05-28T00:30:21	X11: Add Xdbe support to message boxes (thanks, Melker!). Without this, message boxes with a lot of text will noticibly flicker as you mouse over buttons. Fixes Bugzilla #2343.
46f758ae	2015-05-26T19:54:06	Fix a libtool issue with some mingw-w64 cross compilers (thanks, Ozkan!). http://debbugs.gnu.org/cgi/bugreport.cgi?bug=15321 http://git.savannah.gnu.org/gitweb/?p=libtool.git;a=commit;h=0ebb734910bf56186dd0c0e84b1c8be507bad336 Fixes Bugzilla #2722.
a2c28ec1	2015-05-26T11:13:51	Updated configure script.
13487426	2015-05-26T06:32:19	Fixed bug 1392 - Debian patch: do not propagate -lpthread
5c09bf73	2015-04-25T20:49:26	Only check for Linux-specific input APIs on Linux targets (thanks, Marcus!). This is only for the configure script. The CMake project files already make this Linux-exclusive. Fixes Bugzilla #2659.
b72938c8	2015-04-20T12:22:44	Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.
1a73b4eb	2015-04-11T05:58:37	Some Raspberry Pi build fixes (including Raspberry Pi 2 support). Fixes Bugzilla #2879.
fe6c797c	2015-04-10T23:30:31	Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.
ac2bb3f2	2015-03-23T20:07:24	configure script: fix recursive mutex test on Linux systems (thanks, Ozkan!).
b88ca1b4	2015-02-10T16:28:56	the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802
34a5c70c	2015-01-26T22:27:27	Fixed recently broken configure script for FreeBSD. Found by buildbot.
b48e54aa	2015-01-26T22:00:29	Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.
fe40a172	2014-12-18T00:19:52	Initial merge of Emscripten port! With this commit, you can compile SDL2 with Emscripten ( http://emscripten.org/ ), and make your SDL-based C/C++ program into a web app. This port was due to the efforts of several people, including: Charlie Birks, Sathyanarayanan Gunasekaran, Jukka Jyl?nki, Alon Zakai, Edward Rudd, Bruce Mitchener, and Martin Gerhardy. (Thanks, everyone!)
70438be2	2014-12-03T10:55:23	WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!
f86af130	2014-11-29T14:41:18	Fixed bug 2795 - SDL library detection selects the wrong lib Chris Beck When creating a homebrew recipe for wesnoth, I discovered that the SDL image configuration routine does not detect libpng properly -- if you have multiple instances of libpng on your system, and you use environment variables to select an instance which is not in your system directory, the build can be broken, because it will run configuration tests against the system installed version, but deduce that it should use the filename of the system-installed version. In a vanilla build of wesnoth using homebrew, this results in segfaults at runtime, because you end up linking against two different versions of libpng, which is also needed independently of SDL. The problem is essentially in the "find_lib" routine in the configure file: find_lib() { gcc_bin_path=[`$CC -print-search-dirs 2>/dev/null \| fgrep programs: \| sed 's/[^=]=\(.\)/\1/' \| sed 's/:/ /g'`] gcc_lib_path=[`$CC -print-search-dirs 2>/dev/null \| fgrep libraries: \| sed 's/[^=]=\(.\)/\1/' \| sed 's/:/ /g'`] env_lib_path=[`echo $LIBS $LDFLAGS \| sed 's/-L[ ]//g'`] for path in $gcc_bin_path $gcc_lib_path $env_lib_path /usr/lib /usr/local/lib; do lib=[`ls -- $path/$1 2>/dev/null \| sort -r \| sed 's/.\/\(.*\)/\1/; q'`] if test x$lib != x; then echo $lib return fi done } Because the for loop goes over the system directories before the environment directories, any system-installed lib will shadow the lib selected via environment variables. This is contrary to the behavior of the configuration tests earlier in the script, which prefers the environment variable libs over the system-installed libs. The 'for' loop should instead be: for path in $env_lib_path $gcc_bin_path $gcc_lib_path /usr/lib /usr/local/lib; do You can see the full discussion on the Homebrew / linuxbrew issue tracker here: https://github.com/Homebrew/linuxbrew/issues/172 I have checked that this bug also affects SDL 1.2.15, SDL_mixer and SDL_ttf 1.2, which all use this same "find_lib" routine. I have not determined if the bug affects SDL 2.0, which seems not to use this exact routine.
9c398852	2014-11-22T22:20:40	Corrected header file documentation comment.
839be304	2014-10-15T16:26:51	Updated configure based on recent configure.in changes
24c86b55	2014-09-11T19:24:42	[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam
50cc4efe	2014-09-10T08:54:01	Freescale i.MX6 video driver --- CMakeLists.txt \| 2 + cmake/sdlchecks.cmake \| 20 +++ configure \| 51 +++++++ configure.in \| 28 ++++ include/SDL_config.h.cmake \| 1 + include/SDL_config.h.in \| 1 + src/video/SDL_sysvideo.h \| 3 + src/video/SDL_video.c \| 3 + src/video/mx6/SDL_mx6events.c \| 45 ++++++ src/video/mx6/SDL_mx6events_c.h \| 31 +++++ src/video/mx6/SDL_mx6opengles.c \| 211 ++++++++++++++++++++++++++++ src/video/mx6/SDL_mx6opengles.h \| 68 +++++++++ src/video/mx6/SDL_mx6video.c \| 301 ++++++++++++++++++++++++++++++++++++++++ src/video/mx6/SDL_mx6video.h \| 78 +++++++++++ 14 files changed, 843 insertions(+) create mode 100644 src/video/mx6/SDL_mx6events.c create mode 100644 src/video/mx6/SDL_mx6events_c.h create mode 100644 src/video/mx6/SDL_mx6opengles.c create mode 100644 src/video/mx6/SDL_mx6opengles.h create mode 100644 src/video/mx6/SDL_mx6video.c create mode 100644 src/video/mx6/SDL_mx6video.h
7242e814	2014-09-02T06:55:47	Updated version to 2.0.4
059579e4	2014-08-23T10:47:50	Fixed bug 2696 - Mac: fix display mode refresh rate calculation Alex Szpakowski SDL's Cocoa backend uses the CGDisplayMode API to get refresh rate information about a display mode, but CGDisplayModeGetRefreshRate will return 0 on most non-CRT monitors. The only way I know of to get correct refresh rate information in OS X is via the CoreVideo DisplayLink API. I have attached a patch which tries to use the CVDisplayLinkGetNominalOutputVideoRefreshPeriod function if CGDisplayModeGetRefreshRate fails, which fixes display mode refresh rate information on the monitors I tested. The CVDisplayLink API requires linking with the CoreVideo framework, and the patch updates the various build files to do so.

a6a4e27a

2017-11-12T22:51:12

Updated SDL's YUV support, many thanks to Adrien Descamps New functions get and set the YUV colorspace conversion mode: SDL_SetYUVConversionMode() SDL_GetYUVConversionMode() SDL_GetYUVConversionModeForResolution() SDL_ConvertPixels() converts between all supported RGB and YUV formats, with SSE acceleration for converting from planar YUV formats (YV12, NV12, etc) to common RGB/RGBA formats. Added a new test program, testyuv, to verify correctness and speed of YUV conversion functionality.

bbb22a75

2017-11-05T01:17:24

Updated version to 2.0.8 since SDL_image depends on it

bcdf8b91

2017-11-04T17:35:03

Added SDL_fmod() and SDL_fmodf()

34502143

2017-11-04T15:34:14

Added float versions of SDL's math functions

9c580e14

2017-10-12T13:44:28

Added functions to query and set the SDL memory allocation functions: SDL_GetMemoryFunctions() SDL_SetMemoryFunctions() SDL_GetNumAllocations()

0ce23a54

2017-10-12T08:08:04

Updated version to 2.0.7

e564da78

2017-09-29T10:15:44

revert files I didnt mean to commit!

e27f12e0

2017-09-29T10:07:37

wayland: Fix bug 3814 -Wmissing-field-initializers

260db92c

2017-09-22T16:33:34

Added stub Steam Controller sources to Android and iOS command line builds

2079ec99

2017-09-22T08:30:58

Removed non-existent files

d8286479

2017-09-22T08:30:52

Added stubs for simple Steam Controller support

f465f24d

2017-09-09T08:36:37

Fixed bug 3760 - RWops doesn't check for integer overflow when stdio_fseek only supports 32 bits Simon Hug When RWops seeks with fseek or fseeko it uses the types long or off_t which can be 32 bits on some platforms. stdio_seek does not check if the 64-bit integer for the offset fits into a 32-bit integer. Offsets equal or larger than 2 GiB will have implementation-defined behavior and failure states would be very confusing to debug. The attached patch adds range checking by using the macros from limits.h for long type and some bit shifting for off_t because POSIX couldn't be bothered to specify min and max macros. It also defines HAVE_FSEEKI64 in SDL_config_windows.h so that the Windows function gets picked up automatically with the default config. And there's an additional error message for when ftell fails.

222d25ad

2017-09-08T22:21:01

Fixed bug 3805 - Why is there no --enable-video-rpi option in configure? Andreas Falkenhahn When compiling SDL for the Raspberry Pi, I have to use the --host parameter to enable compilation of the native Raspberry Pi video driver, like so: --host=arm-raspberry-linux-gnueabihf It took me a while to figure out that this was necessary in order to have the native Raspberry Pi video driver compiled in. I think it would be better if there was an option like --enable-video-rpi that could be passed to configure and that would also show up when saying configure --help. Currently, it?s rather difficult to figure out that you have to use the --host parameter with arm-raspberry-linux-gnueabihf in order to get Raspberry Pi video support. It?s also somewhat inconsistent because most other video drivers can in fact be enabled/disabled through specific configure parameters but there is no such parameter for the native Raspberry Pi video driver.

d51dc737

2017-09-06T01:14:23

Fixed bug 3797 - configure check for float.h Ozkan Sezer Cmake checks for float.h, but configure does not: the attached patch adds float.h to checked headers in configury, and it adds the missing HAVE_FLOAT_H macro to SDL_config.h.cmake and SDL_config.h.in. In SDL_config_macosx.h and SDL_config_windows.h, defined HAVE_FLOAT_H as 1, where I know that it's true.

e53c5c5c

2017-08-30T00:40:06

Fix QNX build - prioritize system EGL headers over the Khronos ones

92bf6085

2017-08-29T22:04:43

Fixed bug 3616 - SDL_GL_CreateContext fails with SDL_GL_CONTEXT_DEBUG_FLAG and ANGLE/GLES 2.0 Colin Barrett Using the pre-built x86 devel libs from here: https://www.libsdl.org/release/SDL2-devel-2.0.5-VC.zip If I have: SDL_GL_SetAttribute(SDL_GL_CONTEXT_PROFILE_MASK, SDL_GL_CONTEXT_PROFILE_ES); SDL_GL_SetAttribute(SDL_GL_CONTEXT_MAJOR_VERSION, 2); SDL_GL_SetAttribute(SDL_GL_CONTEXT_MINOR_VERSION, 0); SDL_GL_SetAttribute(SDL_GL_CONTEXT_FLAGS, SDL_GL_CONTEXT_DEBUG_FLAG); and I'm using ANGLE/(a GL driver that doesn't provide an ES2 context) such that SDL_EGL_CreateContext is called by SDL_GL_CreateContext, I get the error "Could not create EGL context (context attributes are not supported)" and no context is created. Looking at the code in SDL_EGL_CreateContext - if gl_config.flags is non-zero, it looks like the code in the section guarded with "#ifdef EGL_KHR_create_context" should be executed - but it apparently isn't. Is it possible this section hasn't been compiled into the pre-built libraries? If I build SDL2.dll myself using the Visual C++ solution (VS2015 Community Update 3) then the call succeeds as I expect

c0530bcd

2017-08-28T22:42:41

We removed QuartzCore link dependency in commit 5be6badaf7e1

8ac85744

2017-08-28T22:36:45

Fixed Vulkan configure check for Android and added one for Mac OS X

dbb0a2aa

2017-08-28T14:34:15

Removed the need for libSDL2main.a on Android, and separated JNI initialization out for other integrations

ce2b1644

2017-08-28T00:11:38

Be clear that disabling Vulkan surface support disables the entire SDL Vulkan integration

c722e58d

2017-08-27T23:25:12

vulkan: Include a copy of vulkan.h and vk_platform.h. Now we can provide Vulkan support in the build even if the build box doesn't have a Vulkan SDK, since we dynamically link to the library anyhow.

25e3a1ec

2017-08-27T22:15:57

vulkan: Initial Vulkan support! This work was done by Jacob Lifshay and Mark Callow; I'm just merging it into revision control.

f807655b

2017-08-21T11:25:04

Fixed bug 3761 - Windows non-MinGW cmake build defines HAVE_WCSLCPY and HAVE_WCSLCAT Tom Seddon https://github.com/SDL-mirror/SDL/commit/0f0ad62237fabb58d5811fe6fa59e5e5aa0e2fb5 (git head at the time of writing); Visual Studio 2015, toolset v140, Platform 10.0.14393.0, building for x64 Windows non-MinGW cmake build sets defines implying wcslcpy and wcslcat are available, but Windows doesn't have these functions. Ryan C. Gordon That's weird, these are the exact two functions that Emscripten incorrectly believed it had until we upgraded the buildbot's emsdk install. Not sure what's up with this, but it's possibly not a MingW-specific thing!

a78c20ae

2017-08-21T11:17:38

configury: check mmdeviceapi.h and audioclient.h before enabling wasapi.

2dc5d32f

2017-08-18T18:16:37

Updated version to 2.0.6

bcf0e071

2017-08-18T17:29:44

Added WASAPI audio target to autoconf build process

8816bb08

2017-08-18T19:53:40

configure: Apple platforms don't need to build with -fpascal-strings anymore.

677b2e57

2017-08-18T19:52:58

configure: mac and iOS should compile core/unix/*.c macOS currently needs this if you build with X11 support. iOS doesn't (currently), but it doesn't hurt to compile it in case we do something Unixy on that platform later on.

fb835f9e

2017-08-14T20:22:19

Fixed bug 2330 - Debian bug report: SDL2 X11 driver buffer overflow with large X11 file descriptor manuel.montezelo Original bug report (note that it was against 2.0.0, it might have been fixed in between): http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=733015 -------------------------------------------------------- Package: libsdl2-2.0-0 Version: 2.0.0+dfsg1-3 Severity: normal Tags: patch I have occasional crashes here caused by the X11 backend of SDL2. It seems to be caused by the X11_Pending function trying to add a high number (> 1024) file descriptor to a fd_set before doing a select on it to avoid busy waiting on X11 events. This causes a buffer overflow because the file descriptor is larger (or equal) than the limit FD_SETSIZE. Attached is a possible workaround patch. Please also keep in mind that fd_set are also used in following files which may have similar problems. src/audio/bsd/SDL_bsdaudio.c src/audio/paudio/SDL_paudio.c src/audio/qsa/SDL_qsa_audio.c src/audio/sun/SDL_sunaudio.c src/joystick/linux/SDL_sysjoystick.c -------------------------------------------------------- On Tuesday 24 December 2013 00:43:13 Sven Eckelmann wrote: > I have occasional crashes here caused by the X11 backend of SDL2. It seems > to be caused by the X11_Pending function trying to add a high number (> > 1024) file descriptor to a fd_set before doing a select on it to avoid busy > waiting on X11 events. This causes a buffer overflow because the file > descriptor is larger (or equal) than the limit FD_SETSIZE. I personally experienced this problem while hacking on the python bindings package for SDL2 [1] (while doing make runtest). But it easier to reproduce in a smaller, synthetic testcase.

f8de064c

2017-08-13T22:26:44

Added wchar.h to fix build on some platforms with new wcs* functions

f1829d95

2017-08-13T20:37:49

Added SDL_wcscmp()

df2d2994

2017-08-13T18:12:06

Fixed bug 2812 - Make libSDL2main.a usable on Android via a dummy symbol Jonas Kulla This eliminates the need to manually compile in SDL_main_android.c. Instead, add "-lSDL2main -Wl,-u,SDL_main_dummy" when linking. I don't know how the nkd-build process works, but unless it was for some reason linking libSDL2main.a it should be unaffected.

e4124ff5

2017-08-12T15:00:33

Fixed bug 3208 - Minor improvements to the configure script Rafal Muzylo "if we're already using libtool, why aren't we using it ?"; they've been inspired by the fact, that at that mark, neither libSDL2_test.a nor libSDL2main.a were being built correctly (not sure if it's fully broken or just because I've tested the out-of-tree build)

a48c9e6d

2017-08-11T21:16:33

Fixed bug 3292 - SDL_rwops and 64-bit file I/O Juha Niemim? On AmigaOS 4 platform with Newlib 'C' library, there is a problem with failing fseeko64. This seemed to be caused by using fopen instead of fopen64.

2d67381a

2017-08-09T18:41:59

haiku: non-x86 spins use a normal libstdc++ filename. Handle the differences. Fixes Bugzilla #3730.

e9ae411a

2017-08-04T23:01:01

Updated generated configure script.

3c09265d

2017-07-10T18:31:28

Fixed bug 3609 - Windows build fails due to conflicting types for 'XINPUT_GAMEPAD_EX' Ozkan Sezer (In reply to Ryan C. Gordon from comment #9) > I've put this patch in as https://hg.libsdl.org/SDL/rev/7213ae46e870 ...can > you verify this works on the latest MinGW? > > Thanks, > --ryan. This patch is wrong: the structure in question has nothing to do with any gcc version in use. I suggest reverting this adding a conigury check for it, instead. Something like the following should do it: (configure needs regenerating.)

88100237

2017-07-09T23:00:43

Updated generated configure script.

121d7d25

2017-06-11T22:30:06

directfb: Fixed configure script not finding shared objects for dynamic loading.

d9039f23

2017-06-08T13:27:58

jack: Initial shot at a JACK audio target. http://jackaudio.org/ Fixes Bugzilla #2163. (with several more commits following to improve this code.)

a7fc2822

2017-05-24T19:56:59

audio: rename bsd target to netbsd. Apparently this is no longer a generic BSD audio target, and hasn't been for years, so rename it for NetBSD.

d00dfc43

2017-05-02T11:31:14

Fixed another AC_DEFINE.

3f7f65a3

2017-05-02T11:16:58

Fixed configure script. The Haiku patch would define some HAVE_* things to /**/ instead of 1, breaking the build for various things.

619ab7a2

2017-05-01T18:39:05

haiku: Various fixes from haikuports. Based on patch here: https://github.com/haikuports/haikuports/blob/master/media-libs/libsdl2/patches/libsdl2-2.0.5.patchset

06d6ada8

2017-04-02T21:33:02

Updated generated configure script.

94a69443

2017-03-01T15:05:54

mistake: Revert the files that I did not mean to commit

7bbb13ea

2017-03-01T14:50:59

* Some refactoring and bug fixes. Thanks Micha? Kuchta!

32ef85b5

2017-02-26T01:03:39

Updated generated configure script.

43dbbd63

2017-02-20T10:55:49

Updated iOS fat build

1b3327ed

2017-01-24T16:18:25

configure: report libsamplerate support status.

36cb05a8

2017-01-24T12:20:12

configure.in: Check for sse3 too when setting -mfpmath=387.

3594bf8e

2017-01-23T01:05:44

audio: Wired up new SSE code to build system.

e0a40fb6

2017-01-09T02:54:42

Implemented full evdev keyboard text support This is based on the Linux kernel driver, and has fallback mapping tables in case we aren't connected to a virtual terminal.

25b47ea3

2017-01-08T10:52:02

Fixed attempting to dynamically load libsamplerate when shared object loading is disabled. Thanks to Ozkan Sezer for pointing this out

df25258a

2017-01-06T20:43:53

Added configure and cmake support for libsamplerate

1e8f074c

2016-11-29T05:34:20

Avoid conflicts with multiple versions of udev by first trying the library that is linked with the executable, if any, and then picking the one that is in the build environment. This fixes joystick detection for applications using the Steam Linux Runtime

2a5fab63

2016-11-19T23:27:51

Updated configure script.

ac74e16c

2016-11-10T17:19:34

Standardized the format of the SDL joystick GUID and added functions to retrieve the USB VID/PID from a joystick and game controller.

077d6e64

2016-11-01T10:42:35

Fixed bug with udev support reporting Joshua Bodine I'm going to reopen this because configure should still accurately report whether libudev will be used. Right now it just tests whether it's enabled as an argument, not whether configure was successful in finding it.

9a8642bd

2016-11-01T10:30:46

Fixed bug 3478 - Patch Haiku to use dlopen instead of load_add_on Kai Sterker SDL2 on Haiku so far uses Haiku-specific APIs for loading dynamic objects as add-ons, instead of using dlopen to load them as libraries. This, for example, leads to SDL_mixer not being able to load its audio backends, when compiled with standard settings. As discussed at https://www.freelists.org/post/haikuports/SDL2-mixer-ogg-music-not-playing-and-other-stuff,2 , the best way to deal with this would be using dlopen instead of load_add_on. The following patch implements this change by dropping the Haiku-specific bits and using dlopen instead.

808c75d1

2016-10-07T18:57:40

Fixed bug 2824 - Add Fcitx Input Method Support Weitian Leung Just moved ibus direct call to SDL_IME_* related functions, and adds fcitx IME support (uses DBus, too), enable with env: SDL_IM_MODULE=fcitx (ibus still the default one)

abefe785

2016-10-07T18:03:08

Fixed bug 3043 - fix alsa configury and cmake checks Ozkan Sezer SDL's alsa uses snd_pcm_recover() which has been available only since alsa-lib-1.0.11.

e45698d2

2016-09-28T22:24:01

Updated version to 2.0.5 in preparation for release

f89857f1

2016-09-26T23:09:34

Updated configure script.

e5070d20

2016-09-15T08:57:56

Fixed set of libraries needed to build on Mac OS X

93d42e2d

2016-09-15T08:46:14

Hopefully fixed the cmake build on Mac OS X

8c01d588

2016-09-15T08:29:20

Fixed building new coreaudio driver on Mac OS X

1428bab3

2016-09-01T16:01:54

Fixes building SDL on Ubuntu 16.04 with Mir headers installed

f11a4409

2016-09-01T01:26:56

wayland: Add support for relative mouse mode, by Jonas ?dahl <jadahl@gmail.com> Generate the C protocol files from the protocol XML files installed by wayland-protocols, and use them to implement support for relative pointer motions and pointer locking. Note that at the time, the protocol is unstable and may change in the future. Any future breaking changes will, however, fail gracefully and result in no regressions compared to before this patch.

19d3500a

2016-06-23T18:39:05

wayland: Build own version of core protocol Since we are loading shared objects dynamically, build our own version of the core protocol symbols, so that we in the future can include protocol extensions.

697984df

2016-02-21T19:21:21

Regenerated configure script with Mir changes.

dc5f05bb

2016-01-07T16:42:30

Use --enable-new-dtags to set RUNPATH rather than RPATH so that LD_LIBRARY_PATH is not overridden by the application.

1373e890

2016-01-04T22:58:38

Try to build with GCC's -Wdeclaration-after-statement. This will help catch things that'll cause issues on C89 compilers before we send them on to fail on Buildbot.

9d789ebe

2015-12-29T19:14:19

Updated configure script.

2bf6f1bc

2015-09-20T23:08:36

Added initial support for MFi game controllers on iOS.

bf9bd59c

2015-06-29T22:24:00

Fixed bug 2464 - Configure a sdl2-config.cmake.in together with sdl2.pc.in Leonardo Despite having a CMakeLists.txt file, SDL2 seems to be mainly built using the autotools system by package-managers. It is nice to have it but it is only useful if you are building SDL2 by yourself. People that want to use CMake to find their already-installed SDL2 are using a FindSDL2.cmake module based on the old FindSDL.cmake. This is not deprecated but it is discouraged by the CMake devs (see http://www.cmake.org/Bug/view.php?id=14826), as these modules needs maintainers to be included in the official CMake installation. To fix that, SDL and its accompanying libraries could configure a simple sdl2-config.cmake file, much like it does with sdl2.pc.in. We don't need to configure a full sdl2-config.cmake as in this post, http://forums.libsdl.org/viewtopic.php?t=10068&sid=ccf8abbf0d73fb03ae9cded991e60959 (because it depends on it being built with CMake). Using something as simple as http://www.cmake.org/Wiki/CMake/Tutorials/Packaging#Package_Configuration_Files is deemed enough. Here is another: http://quickgit.kde.org/?p=prison.git&a=blob&f=lib%2Fprison%2FPrisonConfig.cmake.in

0e45984f

2015-06-21T17:33:46

Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().

fb5732dc

2015-06-19T23:53:33

GCC is warning about global functions with the same name as variables in the code, when using -Wshadow. This is a little ridiculous because we have no idea what functions a given platform will provide, so we'll disable -Wshadow for now.

8283abdb

2015-06-08T01:17:58

Updated configure script.

2a757825

2015-05-28T00:30:21

X11: Add Xdbe support to message boxes (thanks, Melker!). Without this, message boxes with a lot of text will noticibly flicker as you mouse over buttons. Fixes Bugzilla #2343.

46f758ae

2015-05-26T19:54:06

Fix a libtool issue with some mingw-w64 cross compilers (thanks, Ozkan!). http://debbugs.gnu.org/cgi/bugreport.cgi?bug=15321 http://git.savannah.gnu.org/gitweb/?p=libtool.git;a=commit;h=0ebb734910bf56186dd0c0e84b1c8be507bad336 Fixes Bugzilla #2722.

a2c28ec1

2015-05-26T11:13:51

Updated configure script.

13487426

2015-05-26T06:32:19

Fixed bug 1392 - Debian patch: do not propagate -lpthread

5c09bf73

2015-04-25T20:49:26

Only check for Linux-specific input APIs on Linux targets (thanks, Marcus!). This is only for the configure script. The CMake project files already make this Linux-exclusive. Fixes Bugzilla #2659.

b72938c8

2015-04-20T12:22:44

Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.

1a73b4eb

2015-04-11T05:58:37

Some Raspberry Pi build fixes (including Raspberry Pi 2 support). Fixes Bugzilla #2879.

fe6c797c

2015-04-10T23:30:31

Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.

ac2bb3f2

2015-03-23T20:07:24

configure script: fix recursive mutex test on Linux systems (thanks, Ozkan!).

b88ca1b4

2015-02-10T16:28:56

the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802

34a5c70c

2015-01-26T22:27:27

Fixed recently broken configure script for FreeBSD. Found by buildbot.

b48e54aa

2015-01-26T22:00:29

Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.

fe40a172

2014-12-18T00:19:52

Initial merge of Emscripten port! With this commit, you can compile SDL2 with Emscripten ( http://emscripten.org/ ), and make your SDL-based C/C++ program into a web app. This port was due to the efforts of several people, including: Charlie Birks, Sathyanarayanan Gunasekaran, Jukka Jyl?nki, Alon Zakai, Edward Rudd, Bruce Mitchener, and Martin Gerhardy. (Thanks, everyone!)

70438be2

2014-12-03T10:55:23

WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!

f86af130

2014-11-29T14:41:18

Fixed bug 2795 - SDL library detection selects the wrong lib Chris Beck When creating a homebrew recipe for wesnoth, I discovered that the SDL image configuration routine does not detect libpng properly -- if you have multiple instances of libpng on your system, and you use environment variables to select an instance which is not in your system directory, the build can be broken, because it will run configuration tests against the system installed version, but deduce that it should use the filename of the system-installed version. In a vanilla build of wesnoth using homebrew, this results in segfaults at runtime, because you end up linking against two different versions of libpng, which is also needed independently of SDL. The problem is essentially in the "find_lib" routine in the configure file: find_lib() { gcc_bin_path=[`$CC -print-search-dirs 2>/dev/null | fgrep programs: | sed 's/[^=]*=$.*$/\1/' | sed 's/:/ /g'`] gcc_lib_path=[`$CC -print-search-dirs 2>/dev/null | fgrep libraries: | sed 's/[^=]*=$.*$/\1/' | sed 's/:/ /g'`] env_lib_path=[`echo $LIBS $LDFLAGS | sed 's/-L[ ]*//g'`] for path in $gcc_bin_path $gcc_lib_path $env_lib_path /usr/lib /usr/local/lib; do lib=[`ls -- $path/$1 2>/dev/null | sort -r | sed 's/.*\/$.*$/\1/; q'`] if test x$lib != x; then echo $lib return fi done } Because the for loop goes over the system directories before the environment directories, any system-installed lib will shadow the lib selected via environment variables. This is contrary to the behavior of the configuration tests earlier in the script, which prefers the environment variable libs over the system-installed libs. The 'for' loop should instead be: for path in $env_lib_path $gcc_bin_path $gcc_lib_path /usr/lib /usr/local/lib; do You can see the full discussion on the Homebrew / linuxbrew issue tracker here: https://github.com/Homebrew/linuxbrew/issues/172 I have checked that this bug also affects SDL 1.2.15, SDL_mixer and SDL_ttf 1.2, which all use this same "find_lib" routine. I have not determined if the bug affects SDL 2.0, which seems not to use this exact routine.

9c398852

2014-11-22T22:20:40

Corrected header file documentation comment.

839be304

2014-10-15T16:26:51

Updated configure based on recent configure.in changes

24c86b55

2014-09-11T19:24:42

[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam

50cc4efe

2014-09-10T08:54:01

Freescale i.MX6 video driver --- CMakeLists.txt | 2 + cmake/sdlchecks.cmake | 20 +++ configure | 51 +++++++ configure.in | 28 ++++ include/SDL_config.h.cmake | 1 + include/SDL_config.h.in | 1 + src/video/SDL_sysvideo.h | 3 + src/video/SDL_video.c | 3 + src/video/mx6/SDL_mx6events.c | 45 ++++++ src/video/mx6/SDL_mx6events_c.h | 31 +++++ src/video/mx6/SDL_mx6opengles.c | 211 ++++++++++++++++++++++++++++ src/video/mx6/SDL_mx6opengles.h | 68 +++++++++ src/video/mx6/SDL_mx6video.c | 301 ++++++++++++++++++++++++++++++++++++++++ src/video/mx6/SDL_mx6video.h | 78 +++++++++++ 14 files changed, 843 insertions(+) create mode 100644 src/video/mx6/SDL_mx6events.c create mode 100644 src/video/mx6/SDL_mx6events_c.h create mode 100644 src/video/mx6/SDL_mx6opengles.c create mode 100644 src/video/mx6/SDL_mx6opengles.h create mode 100644 src/video/mx6/SDL_mx6video.c create mode 100644 src/video/mx6/SDL_mx6video.h

7242e814

2014-09-02T06:55:47

Updated version to 2.0.4

059579e4

2014-08-23T10:47:50

Fixed bug 2696 - Mac: fix display mode refresh rate calculation Alex Szpakowski SDL's Cocoa backend uses the CGDisplayMode API to get refresh rate information about a display mode, but CGDisplayModeGetRefreshRate will return 0 on most non-CRT monitors. The only way I know of to get correct refresh rate information in OS X is via the CoreVideo DisplayLink API. I have attached a patch which tries to use the CVDisplayLinkGetNominalOutputVideoRefreshPeriod function if CGDisplayModeGetRefreshRate fails, which fixes display mode refresh rate information on the monitors I tested. The CVDisplayLink API requires linking with the CoreVideo framework, and the patch updates the various build files to do so.

kc3-lang/SDL/configure

configure

Log