|
c65a679d
|
2010-12-16T19:52:48
|
|
Fix typos in test comments.
* tests/posixsubst-data.test, tests/posixsubst-extradist.test,
tests/posixsubst-ldadd.test, tests/posixsubst-libraries.test,
tests/posixsubst-ltlibraries.test, tests/posixsubst-programs.test,
tests/posixsubst-scripts.test, tests/posixsubst-sources.test,
tests/posixsubst-tests.test: Fix typos.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
9e44e644
|
2010-11-30T12:22:25
|
|
Test `$(var:suf=rpl)' expansion in special automake variables.
* tests/posixsubst-data.test: New test.
* tests/posixsubst-extradist.test: Likewise.
* tests/posixsubst-ldadd.test: Likewise.
* tests/posixsubst-libraries.test: Likewise.
* tests/posixsubst-ltlibraries.test: Likewise.
* tests/posixsubst-programs.test: Likewise.
* tests/posixsubst-scripts.test: Likewise.
* tests/posixsubst-sources.test: Likewise.
* tests/posixsubst-tests.test: Likewise.
* tests/Makefile.am (TESTS): Update.
|
|
|
22ee3bdf
|
2010-11-25T22:06:14
|
|
Fix spurious silent*.test failures for $CC != gcc
In some tests on automake-produced silent rules, we forced the
use of gcc depmode to improve testsuite coverage; but this has
unsurprisingly led to spurious failures when some non-GNU C
compilers were used. So we are now careful to require GCC in
tests that force gcc depmode.
From reports by Ralf Wildenhues.
* silent5.test: Test removed, its content split into ...
* silent-many-generic.test, silent-many-gcc.test: ... these new
sister tests, the latter of which forces gcc depmode and lists
"gcc" in $required.
* silentlex.test: Test removed, its content split into ...
* silent-lex-generic.test, silent-lex-gcc.test: ... these new
sister tests, the latter of which forces gcc depmode and lists
"gcc" in $required.
* silentyacc.test: Test removed, its content split into ...
* silent-yacc-generic.test, silent-yacc-gcc.test: ... these new
sister tests, the latter of which forces gcc depmode and lists
"gcc" in $required.
* tests/Makefile.am (TESTS): Updated.
|
|
|
fadd73d7
|
2010-11-21T16:25:45
|
|
Tests: consistently use "|| Exit 1" after ". ./defs".
The test scripts below has been modified with this command:
$ sed -i 's/^\. \.\/defs *$/& || Exit 1/' tests/*.test
* tests/autohdr.test: Use `. ./defs || Exit 1', not bare
`. ./defs', for consistency with other tests.
* tests/autohdr2.test: Likewise.
* tests/autohdr3.test: Likewise.
* tests/autohdr4.test: Likewise.
* tests/cond23.test: Likewise.
* tests/cond24.test: Likewise.
* tests/cond25.test: Likewise.
* tests/cond26.test: Likewise.
* tests/cond27.test: Likewise.
* tests/cond28.test: Likewise.
* tests/cond29.test: Likewise.
* tests/cond30.test: Likewise.
* tests/cond31.test: Likewise.
* tests/cond32.test: Likewise.
* tests/cond33.test: Likewise.
* tests/cond34.test: Likewise.
* tests/cond35.test: Likewise.
* tests/cond36.test: Likewise.
* tests/cond37.test: Likewise.
* tests/cond38.test: Likewise.
* tests/cond39.test: Likewise.
* tests/cond40.test: Likewise.
* tests/cond41.test: Likewise.
* tests/cond42.test: Likewise.
* tests/cond43.test: Likewise.
* tests/cond44.test: Likewise.
* tests/cond45.test: Likewise.
* tests/dollarvar.test: Likewise.
* tests/dollarvar2.test: Likewise.
* tests/hfs.test: Likewise.
* tests/libobj14.test: Likewise.
* tests/percent.test: Likewise.
* tests/percent2.test: Likewise.
* tests/phony.test: Likewise.
* tests/silent.test: Likewise.
* tests/silent2.test: Likewise.
* tests/silent3.test: Likewise.
* tests/silent4.test: Likewise.
* tests/silent5.test: Likewise.
* tests/silent6.test: Likewise.
* tests/silent7.test: Likewise.
* tests/silent9.test: Likewise.
* tests/silentcxx.test: Likewise.
* tests/silentf77.test: Likewise.
* tests/silentf90.test: Likewise.
* tests/silentlex.test: Likewise.
* tests/silentyacc.test: Likewise.
|
|
|
ddf45657
|
2010-11-21T15:46:20
|
|
Avoid useless cleaning in some `silent*.test' tests.
* tests/silentf77.test: Removed useless calls to "make clean"
and "make maintainer-clean".
* tests/silentf90.test: Likewise.
* tests/silent3.test: Removed useless call to "make distclean".
* tests/silent4.test: Likewise.
* tests/silent9.test: Likewise.
|
|
|
b27b2126
|
2010-11-19T19:52:48
|
|
help4.test: fix botched heading comment.
* tests/help4.test: Fixed the heading comment, since it
didn't correctly describe what checks the testcase was
supposed to perform.
|
|
|
3262c47d
|
2010-11-19T19:43:28
|
|
help2.test: add checks on aclocal too.
* tests/help2.test: Check that also `aclocal --version' and
`aclocal --help' work with configure.in and acinclude.m4 both
broken.
|
|
|
36c1b5c0
|
2010-11-17T20:19:19
|
|
Merge branch 'fix-silentf77-sun-fortran' into maint
|
|
|
87b99db5
|
2010-11-17T20:19:14
|
|
Merge branch 'fix-silent5-sun-fortran' into maint
|
|
|
d0d9f70f
|
2010-11-17T15:18:49
|
|
Fix spurious failures of silent5.test with Sun Fortran.
* tests/silent5.test: Strip from the make output some verbose
messages possibly printed by the SunStudio fortran compilers,
to avoid spurious failures. This bug has been there from the
very first version of this test script.
|
|
|
98462e64
|
2010-11-17T15:07:39
|
|
Fix spurious failures of silent-rules tests with Sun Fortran.
* tests/silentf77.test: Strip from the make output some verbose
messages possibly printed by the SunStudio fortran compilers, to
avoid spurious failures. Add a trailing `:' command.
* tests/silentf90.test: Likewise.
|
|
|
86a3c0cc
|
2010-11-16T20:59:21
|
|
Merge branch 'fix-colon-tests-regression-on-aix' into maint
|
|
|
983a977e
|
2010-11-16T20:59:21
|
|
Merge branch 'fix-ansi-test-regression-on-aix' into maint
|
|
|
1e1f2a13
|
2010-11-16T20:02:54
|
|
Fix regression in colon{5,6}.test (failures on AIX 5.3).
* tests/colon5.test: Also substitute `@SHELL@' with `$SHELL' when
post-processing the generated Makefile.in, to work around a bug
of AIX 5.3 make which doesn't allow setting the `$(SHELL)' macro
on the commend line. Calls to `$MAKE' adjusted accordingly.
* tests/colon6.test: Likewise.
Regression introduced in commit v1.11-175-gf9fe878 "Modernize,
improve and/or extend tests `colon*.test", and reported by Ralf
Wildenhues.
|
|
|
3616946d
|
2010-11-16T19:22:10
|
|
tests: avoid '##'-style comments inside recipe commands.
* tests/confh.test, tests/confh8.test: Remove
double-hash comments from makefile rule commands, they
are not part of the Automake API.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
f140b6bc
|
2010-11-16T19:18:56
|
|
Fix regression in ansi.test (failure on AIX 5.3).
* tests/ansi.test: Remove redundant hackish check done using a
hand-postprocessed Makefile.in. This checs worked by setting
the `$(SHELL)' macro on the command line of make, but this is
not supported by the AIX 5.3 make implementation.
This bug has been lurking for a long time, and was activated by
commit v1.11-125-gc1f6cdb "Enable `errexit' shell flag in various
tests". Report by Ralf Wildenhues.
|
|
|
c4d75f3e
|
2010-11-14T18:22:50
|
|
tests: work around dash quoting issue in case statements.
* tests/color.test, tests/color2.test: Quote variable in case
pattern, to avoid skipping tests with dash 0.5.5.1.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
a6da48d3
|
2010-11-14T17:53:49
|
|
Fix install-strip when $(STRIP) contains several words.
* lib/am/install.am (install-strip): Update comment. Use
separate sub-make invocations for empty and nonempty $(STRIP),
to fix quoting issues.
* tests/strip2.test, tests/strip3.test: New tests.
* tests/Makefile.am (TESTS): Adjust.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
e4693564
|
2010-11-10T19:20:01
|
|
Merge branch 'fix-yaccdry.test' into maint
* fix-yaccdry.test:
Fix yaccdry.test failure: require bison.
|
|
|
ab18ada6
|
2010-11-10T19:19:36
|
|
Fix yaccdry.test failure: require bison.
* tests/yaccdry.test: Require bison.
Found by NixOS Hydra.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
7a020d66
|
2010-11-06T12:46:52
|
|
Fix a bug in variable concatanation with `+='.
* lib/Automake/VarDef.pm (append): Remove extra backslash-escaped
newlines from the end of the variable's content, before appending
to it.
* tests/pluseq11.test: New test, exposing the bug.
* tests/Makefile.am (TESTS): Update.
Reported by Andy Wingo.
|
|
|
d7c1679b
|
2010-10-03T12:29:40
|
|
Fix and document rules to not touch the tree with `make -n'.
* doc/automake.texi (Multiple Outputs): Document the problem of
modifications during dry-run execution, propose solution.
* NEWS: Update.
* automake.in (lang_vala_finish_target): Split recipe so the
stamp file is not removed with GNU `make -n'.
(lang_yacc_target_hook): Separate removal of parser output file
and header remaking.
* lib/am/lisp.am ($(am__ELCFILES)): Determine whether -n was
passed to make, take care not to remove any files in that case.
* lib/am/remake-hdr.am (%CONFIG_H%): Separate removal of
%STAMP% file from induced remaking of config header.
* tests/autohdrdry.test, tests/lispdry.test, tests/yaccdry.test:
New tests.
* tests/Makefile.am (TESTS): Update.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
78e08c86
|
2010-09-21T12:54:25
|
|
Add test for `AM_WITH_DMALLOC' macro.
* tests/dmalloc.test: New test.
* tests/Makefile.am (TESTS): Update.
|
|
|
51e3b684
|
2010-10-04T18:17:22
|
|
Fix nits and bugs in tests `help*.test'.
* tests/help4.test: Fix broken sed commands used to strip `-W...'
flags away from "$AUTOMAKE" and "$ACLOCAL".
* tests/help3.test: Likewise, and fix a botched comment.
* tests/help.test: Likewise. Also, use "AUTOMAKE_fails ..."
instead of "$AUTOMAKE ... && Exit 1", for consistency and to
please maintainet-check.
* tests/help2.test: Likewise.
|
|
|
0498520e
|
2010-10-02T19:33:44
|
|
Improve tests `help*.test' (also fixes maintcheck failures).
* tests/help.test: To run automake, use `$AUTOMAKE' with all `-W'
flags stripped away rather than hard-coded `automake-$APIVERSION',
to better honour user-overrides. Similarly for aclocal.
* tests/help2.test: Likewise.
* tests/help3.test: Likewise.
* tests/help4.test: Likewise.
From a suggestion by Ralf Wildenhues.
|
|
|
b8c1325a
|
2010-10-03T11:42:12
|
|
Document and fix expansion of variables before rules.
* doc/automake.texi (General Operation): Document that variables
are expanded before rules.
* lib/am/check.am (am__check_post): Reword a bit so it does not
get matched as a rule.
Suggestion by Ben Pfaff.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
9e126f15
|
2010-10-02T18:38:34
|
|
Merge branch 'fix-tests-empty-regression' into maint
* fix-tests-empty-regression:
Revert "parallel-tests: avoid command-line length limit issue."
|
|
|
614b643e
|
2010-09-26T09:21:14
|
|
Revert "parallel-tests: avoid command-line length limit issue."
This reverts commit 24e3b4ee2f8cb9f72dd94a05a893f3d4e88b7835,
because it re-opened the bug fixed by v1.11-10-g218e678.
2010-09-07 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
parallel-tests: avoid command-line length limit issue.
* automake.in (handle_tests): New argument $makefile, new
substitution %MAKEFILE%.
(generate_makefile): Adjust.
* lib/am/check.am [%?PARALLEL_TESTS%] (check-TESTS): Pass
sanitized TEST_LOGS value as makefile snippet on standard
input to $(MAKE), to avoid exceeding the command line limit on
w32 (MSYS).
* NEWS: Update.
Report by Bob Friesenhahn.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
a82bc0d5
|
2010-09-25T17:07:27
|
|
Extend tests on `--help' and `--version' options.
* tests/help.test: Create a new empty directory and chdir into
it, rather than removing already present files. Run the aclocal
and automake wrapper scripts directly, instead of relying on
$AUTOMAKE and $ACLOCAL. Be sure to correctly match literal dots
in aclocal's and automake's stderr. Add a trailing `:' command.
* tests/help2.test: New test, checking that options `--help' and
`--version' works in directories with broken `configure.in'.
* tests/help3.test: New test, checking that options `--help' and
`--version' take precedence on the other options.
* tests/help4.test: New test, checking that the first among the
`--help' and `--version' options to be specified on the command
line wins.
* tests/Makefile.am (TESTS): Updated.
|
|
|
a25c6733
|
2010-09-25T21:31:06
|
|
Testsuite: Use `$PATH_SEPARATOR', not `:', when extending PATH.
* tests/compile2.test: Do no uselessly (implicitly) repeat the
computation of PATH_SEPARATOR again.
* tests/instmany-mans.test: Use `$PATH_SEPARATOR', not `:', when
extending/redefining PATH.
* tests/instmany-python.test: Likewise.
* tests/instmany.test: Likewise.
* tests/man4.test: Likewise.
* tests/mkinst3.test: Likewise.
* tests/mmodely.test: Likewise.
* tests/multlib.test: Likewise.
* tests/txinfo30.test: Likewise.
* tests/README (Section "Writing test cases" subsection "Do"):
Updated.
* Makefile.am (sc_tests_PATH_SEPARATOR): New maintainer check.
(syntax_check_rules): Updated.
|
|
|
067455ce
|
2010-09-25T16:53:13
|
|
Testsuite: new vars `$PATH_SEPARATOR' and `$APIVERSION'.
* tests/defs.in ($APIVERSION): New AC_SUBST'd variable.
($ACLOCAL, $AUTOMAKE): Use it.
($PATH_SEPARATOR): New AC_SUBST'd variables.
($PATH): Use it.
|
|
|
c423cdb4
|
2010-09-22T21:26:09
|
|
Remove obsolete .cvsignore files.
* .cvsignore, doc/.cvsignore, lib/.cvsignore, lib/am/.cvsignore,
lib/Automake/.cvsignore, lib/Automake/tests/.cvsignore,
m4/.cvsignore, tests/.cvsignore: Files deleted. Even when using
savannah's CVS readonly mirror there's no way to commit back to
the real repository, so this files are not worth maintaining or
keeping around.
|
|
978dfcf5
|
2010-09-17T06:31:33
|
|
Avoid triple-space after period.
* automake.in (handle_single_transform): Avoid 3 spaces at
sentence end.
* ChangeLog.03: Likewise.
* lib/Automake/ChannelDefs.pm: Likewise.
* lib/Automake/Channels.pm (_print_message): Likewise.
* lib/Automake/Rule.pm (rule): Likewise.
* lib/Automake/Variable.pm (var): Likewise.
* lib/am/distdir.am: Likewise.
* tests/insthook.test: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
|
e09f00c8
|
2010-09-15T21:43:56
|
|
Test automake-generated portions of configure help screen.
* tests/help-depend.test: New test.
* tests/help-depend2.test: Likewise.
* tests/help-dmalloc.test: Likewise.
* tests/help-init.test: Likewise.
* tests/help-lispdir.test: Likewise.
* tests/help-maintainer.test: Likewise.
* tests/help-multilib.test: Likewise.
* tests/help-regex.test: Likewise.
* tests/help-silent.test: Likewise.
* tests/help-upc.test: Likewise.
* tests/mmode.test: Remove tests on `configure --help' output,
they are supersed by tests in `help-maintainer.test'.
* tests/Makefile.am (TESTS): Update.
|
|
|
59db71ca
|
2010-09-14T22:16:35
|
|
tests/README: Don't put GCS mandated tools in $required.
|
|
|
77dc6c1b
|
2010-09-13T14:51:25
|
|
Merge branch 'fix-colon-tests-regression' into maint
|
|
|
1946eade
|
2010-09-13T14:50:14
|
|
Fix regression in test `colon4.test'.
* tests/colon4.test: Fix botched editing to `configure.in'
that made the test useless. Since we are at it, improve
comments and make grepping of generated Makefile.in slighty
stricter.
Regression introduced by change "Modernize, improve and/or
extend tests `colon*.test" (Stefano Lattarini, 2010-08-08).
|
|
|
4e8b21e1
|
2010-07-05T01:23:16
|
|
Do not require "gzip" explicitly in tests.
The gzip utility is simply expected to be present on any decent
target system for Automake. So it's pointless to put it in
$required.
* tests/install2.test ($required): Do not require "gzip".
* tests/lex3.test: Likewise.
* tests/pr9.test: Likewise.
From a suggestion by Ralf Wildenhues.
|
|
|
f94d28bc
|
2010-09-09T01:24:52
|
|
regenerate Makefile.in to sync with previous commits
|
|
|
f0b4323a
|
2010-09-08T21:05:36
|
|
Make some `confh*.test' tests more "semantic" (plus tweakings).
* tests/confh.test: Run "autoconf", "configure" and "make check",
instead of munging/grepping the generated `Makefile.in'.
* tests/confh4.test: Relax the grepping of Makefile.in w.r.t.
white spaces. Do not create usless dummy source file `foo.c'
and useless dummy header file `acconfig.h'.
(configure.in): Remove superfluous call to `AC_OUTPUT'.
* tests/confh6.test: Add trailing `:' command.
* tests/confh7.test: In comments, add reference to ...
* tests/confh8.test: ... this new test, "semantic" sister
of `confh7.test'.
* tests/Makefile.am (TESTS): Updated.
Prompted by a report from Ralf Wildenhues.
|
|
|
e335d8bc
|
2010-09-08T12:28:31
|
|
Remove useless whitespace padding in XFAIL_TESTS definition.
* tests/Makefile.am (XFAIL_TESTS): Remove whitespace padding.
|
|
|
24e3b4ee
|
2010-09-07T04:38:08
|
|
parallel-tests: avoid command-line length limit issue.
* automake.in (handle_tests): New argument $makefile, new
substitution %MAKEFILE%.
(generate_makefile): Adjust.
* lib/am/check.am [%?PARALLEL_TESTS%] (check-TESTS): Pass
sanitized TEST_LOGS value as makefile snippet on standard
input to $(MAKE), to avoid exceeding the command line limit on
w32 (MSYS).
* NEWS: Update.
Report by Bob Friesenhahn.
|
|
|
ccb31f6a
|
2010-09-07T04:35:49
|
|
Posix 2008 requires make to set errexit.
* lib/am/check.am: Update comment.
|
|
|
529421a0
|
2010-08-27T18:25:17
|
|
Fix bug in test missing6.test.
* tests/missing6.test: Fix the hack used to edit `configure.in',
to avoid producing a configure script that breaks with shells
that do not support $LINENO. Also throw in a couple of cosmetic
changes.
|
|
|
b268a1f6
|
2010-08-21T07:27:12
|
|
Improve robustness of mdate-sh script.
* lib/mdate-sh: Sanitize zsh behavior on startup, to ensure
$ls_command is word-split properly upon invocation.
(error): New function.
(main): Use it. Improve error checking to avoid endless loop
in case $ls_command gave bogus output. Fix eval quotation.
* tests/mdate6.test: New test, to expose eval quotation error.
* tests/Makefile.am: Update.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
9c9cf0d8
|
2010-08-18T23:45:48
|
|
Merge branch 'fix-decomp-tests-regression' into maint
|
|
|
82f4860a
|
2010-08-18T14:39:59
|
|
Fix potential regressions in depcomp{3,5}.test.
* tests/depcomp3.test: Do not uselessly escape the character `$'
in makefile rules, when it's used to expand a make macro.
* tests/depcomp5.test: Likewise.
|
|
|
d0dd88f3
|
2010-08-11T01:21:29
|
|
Tweak and/or extend some `acloca*.test' tests.
* tests/aclocal8.test: Ensure verbose printing of captured
output.
* tests/aclocal.test: Likewise. Also, add trailing `:'
command.
* tests/acloca19.test: Likewise.
* tests/aclocal5.test: Add trailing `:' command, and prefer
`$me' over hard-coded test name.
* tests/aclocal6.test: Likewise.
* tests/aclocal18.test: Add trailing `:' command, and make
some grepping slighty stricter.
* tests/acloca14.test: Likewise. Also, prefer `diff' over
`cmp', and add some "cosmetic" blank lines.
|
|
|
39584250
|
2010-08-10T18:56:38
|
|
Tweak and extend tests `pr[!0-9]*.test'.
* tests/primary3.test: Add trailing `:' command.
* tests/primary.test: Make grepping of Automake's stderr stricter.
Also, add trailing `:' command, and cosmetic changes in spacing.
* tests/primary2.test: Likewise.
* tests/prefix.test: Enable `errexit' shell flags, and related
changes. Add a trailing `:' command.
* tests/proginst.test: Likewise.
|
|
|
f9fe878b
|
2010-06-18T12:12:54
|
|
Modernize, improve and/or extend tests `colon*.test.
* tests/colon.test: Rely on the `configure.in' stub created by
`./defs', rather than writing one from scratch. Do not create
a useless dummy file. Add trailing `:' command.
* tests/colon4.test: Enable the `errexit' shell flag, and
related changes. Rely on the `configure.in' stub created by
`./defs', rather than writing one from scratch.
* tests/colon7.test: Enable `errexit' shell flag, and related
changes. Improve the generated `configure.in' file. Add
trailing `:' command.
* tests/colon2.test: Likewise. Also, add some new checks.
* tests/colon5.test: Improve the generated `configure.in' file.
Add new, much deeper checks. Add trailing `:' command.
* tests/colon6.test: Likewise.
* tests/colon3.test: Improve the generated `configure.in' file.
Prefer perl over pipelined grep. Made stricter. Other changes,
cosmetic and not.
|
|
|
a03bb70a
|
2010-06-21T17:47:28
|
|
Minor improvements and fixes in tests `depcomp*.test'.
* tests/depcomp.test: Do not create useless dummy source files.
Add a trailing `:' command.
* tests/depcomp2.test: Use `unset' on the CFLAG variable to ensure
it's not in in the environment, rather tthan exporting it with an
empty value. Do not pass CC=gcc to configure, as that's already
done in ./defs since we have gcc in $required. Ensure verbose
printing of captured stderr, and normalize its checking. Add a
trailing `:' command.
* tests/depcomp3.test: Quote literal dots and dollar characters in
grep regexps. Always use `: >' rather than `touch' to create empty
files. Explicitly declare phony targets as such in the created
Makefile.am. Add a trailing `:' command.
* tests/depcomp4.test: Quote literal dots and dollar characters in
grep regexp. Explicitly declare phony targets as such in the
created Makefile.am. Ensure verbose printing of captured makes'
stoud/stderr. Add a trailing `:' command.
* tests/depcomp5.test: Move setting of `errexit' shell flag earlier
in the script (just after inclusion of ./defs). Quote literal dots
and dollar characters in grep regexps. Explicitly declare phony
targets as such in the created Makefile.am. Add a trailing `:'
command.
* tests/depcomp6.test: Consistenty use m4 quoting in the generated
configure.in. Cosmetic fixes to spacing. Make the "dummy" `if'
statement required by OpenBSD's sh `set -e' more robust, and add
explanatory comments to it.
* tests/depcomp7.test: Likewise, and add a trailing `:' command.
|
|
|
9ca2fc96
|
2010-06-26T15:33:50
|
|
Modernize, improve and extend tests for PR (`pr[0-9]*.test').
* tests/pr2.test: Add trailing `:' command.
* tests/pr229.test: Likewise.
* tests/pr401.test: Likewise.
* tests/pr401b.test: Likewise.
* tests/pr401c.test: Likewise.
* tests/pr300-prog.test: Likewise, plus cosmetic changes in
spacing.
* tests/pr300-lib.test: Likewise.
* tests/pr300-ltlib.test: Likewise, and ensure verbose printing
of captured make stdout.
* tests/pr211.test: Add trailing `:' command. Also, use the
`configure.in' stub created by ./defs, rather than writing it
from scratch.
* tests/pr204.test: Likewise, plus cosmetic spacing changes.
* tests/pr287.test: Likewise, and move setting of `errexit' shell
flag earlier in the script (just after inclusion of ./defs).
* tests/pr220.test: Make grepping of Automake's stderr stricter.
Also, add trailing `:' command, and cosmetic changes in spacing.
* tests/pr224.test: Move setting of `errexit' shell flag earlier
in the script (just after inclusion of ./defs). Do not export
`CC=gcc' to configure explicitly (it's already exported globally
in ./defs, since we have "gcc" in $required). Use the stub for
`configure.in' created by ./defs, rather than writing it from
scratch. Do not create dummy files required by "gnu" mode (e.g.
README, NEWS), since we run automake in foreign mode anyway.
* tests/pr72.test: Enable `errexit' shell flags, and related
changes. Extend existing checks a bit.
* tests/pr9.test: Likewise. Also, avoid obolescent constructs in
the generated `configure.in', and extend existing checks over the
generated tarball a bit.
* tests/pr87.test: Enable `errexit' shell flags, and related
changes. Add a trailing `:' command. Also, do not create dummy
files required by "gnu" mode (e.g. README, NEWS), since we run
automake in foreign mode anyway.
* tests/pr243.test: Avoid obolescent constructs in the generated
`configure.in'. Enable the `errexit' shell flag, and related
changes. Cosmetic changes to spacing, add trailing `:' command,
and add a "FIXME" comment.
* tests/pr266.test: Likewise, and add explicit command line switch
`--enable-dependecy-tracking' to the ./configure call.
* tests/pr279.test: Avoid obolescent constructs in the generated
`configure.in'; also, use the `configure.in' stub created by
./defs, rather than writing it from scratch. Enable `errexit'
shell flag, and related changes. Add trailing `:' command.
* tests/pr279-2.test: Likewise, and make grepping of Makefile.in
stricter.
* tests/pr307.test: Move setting of `errexit' shell flag earlier
in the script (just after inclusion of ./defs). Escape literal
dots in grep regular expressions. Also, add a trailing `:'
command, and cosmetic changes to spacing.
|
|
|
4a709b8a
|
2010-07-14T14:01:43
|
|
Improve and extend tests `asm*.test'.
* tests/asm.test: Use configure.in stub generated by ./defs,
and avoid obsoleted autoconf constructs. Make grepping of
Automake stderr stricter. Do not create useless source file.
Improve verbose messages. Minor cosmetic changes. Tell to
keep it in sync with other sister tests asm*.test.
* tests/asm2.test: Likewise.
* tests/asm3.test: Likewise.
|
|
|
c8668e07
|
2010-08-08T16:45:17
|
|
PR tests: add excerpts from original bug reports, for clarity.
* tests/pr2.test: Ditto.
* tests/pr9.test: Likewise.
* tests/pr72.test: Likewise.
* tests/pr87.test: Likewise.
* tests/pr211.test: Likewise.
* tests/pr220.test: Likewise.
* tests/pr224.test: Likewise.
* tests/pr229.test: Likewise.
* tests/pr243.test: Likewise.
* tests/pr266.test: Likewise.
* tests/pr279.test: Likewise, and tell to keep it in sync
with its sister test.
* tests/pr279-2.test: Likewise.
|
|
|
4e06cfe8
|
2010-06-19T01:32:14
|
|
Modernize, improve and/or extend test scripts `conf*.test'.
* tests/confh5.test: Cosmetic changes.
* tests/conff.test: Likewise.
* tests/confdeps.test: Likewise.
* tests/conflnk.test: Likewise.
* tests/conflnk2.test: Likewise.
* tests/confsub.test: Likewise.
* tests/confvar.test: Likewise, and make grepping of Makefile.in
stricter.
* tests/confvar2.test: Likewise.
* tests/conflnk3.test: Cosmetic changes, and re-enable a temporarly
disabled test (which didn't work with autoconf <= 2.59, but now we
are requiring autoconf 2.62, so...)
* tests/conflnk4.test: Cosmetic changes, and extend existing tests
accordingly to "TODO" comments.
* tests/conff2.test: Make grepping of Automake's stderr stricter.
Add some comments explaining why we don't use the `configure.in'
stub preset be ./defs.
* tests/confh.test: Use the `configure.in' stub created by ./defs,
rather than writing one from scratch, and do not call AC_OUTPUT.
Enable `errexit' shell flag, and related changes. Prefer diff over
cmp to compare text files. Prefer perl over sed to fetch the value
of $(DIST_COMMON) from Makefile.in. Make grepping of the contents
of $(DIST_COMMON) stricter.
* tests/confh4.test: Use the `configure.in' stub created by ./defs,
rather than writing one from scratch. Make grepping of Makefile.in
stricter.
* tests/confh5.test: Make grepping of `config.h' stricter. Add a
comment.
* tests/configure.test: Avoid obsolescent constructs in generated
`configure.ac'. Do not write `configure.in' two times. Escape
literal dots in grep regular expressions.
* tests/confincl.test: Enable `errexit' shell flag, and related
changes. Prefer fgrep over grep. Other cosmetic changes.
* tests/config.test: Renamed to ...
* tests/confh6.test: ... this. Fix m4 quoting in `configure.in',
and make grepping of `config.h' and `config.h.in' stricter.
* tests/conf2.test: Renamed ...
* tests/confh7.test: ... to this. Use the `configure.in' stub
created by ./defs, rather than writing one from scratch. Try to
run the checks both with and without AC_PROG_CC and AC_OUTPUT in
`configure.in'.
* tests/Makefile.am (TESTS): Updated.
|
|
|
755ebe32
|
2010-07-14T15:22:12
|
|
Tweak, extend and improve tests `cond[a-z]*.test'.
* tests/condd.test: Add trailing `:' command. Typofix in
comment.
* tests/condhook.test: Make sure target `install-data-hook' is
not called by `make install', but that data files are installed.
Use proper m4 quoting in configure.in. Add trailing `:' command.
* tests/condhook2.test: New test, sister test of condhook, with
inverted semantic.
* tests/condinc2.test: Use proper m4 quoting in configure.in.
Prefer trailing `:' command over trailing `Exit 0'.
* tests/condman2.test: Enable errexit shell flag, and related
changes. Add trailing `:' command.
* tests/condman.test: Likewise. Also, do not create useless
dummy manpages, and use proper m4 quoting in configure.in.
* tests/condman3.test: New test, similar to condman.test, but
it also runs ./configure and "make install", and check the
installed files.
* tests/Makefile.am (TESTS): Updated.
|
|
|
6328f148
|
2010-07-14T13:33:49
|
|
Separate failing part of test `all.test'.
* tests/all.test: Keep only (x)failing part of the test. Working
checks moved out to ...
* tests/all2.test: ... this new test.
* tests/Makefile.am (TESTS): Updated.
|
|
|
c92e890c
|
2010-06-27T16:34:42
|
|
Modernize, improve and extend tests `subobj*.test'.
* tests/subobjname.test: Add trailing `:' command.
* tests/subobj.test: Make grepping of `Makefile.in' stricter.
Escape literal dots in grep regexps.
* tests/subobj2.test: Add trailing `:' command. Do not use the
unportable fgrep option `-e'.
* tests/subobj3.test: Add trailing `:' command.
(configure.in): Use proper m4 quoting, and avoid obsolescent
constructs.
* tests/subobj8.test: Likewise. Also, enable `errexit' shell
flag, with related changes
* tests/subobj4.test: Likewise. Also, make grepping of
`Makefile.in' stricter.
* tests/subobj5.test: Add trailing `:' command. Move setting of
`errexit' shell flag earlier in the script (just after inclusion
of ./defs).
(configure.in): Use the stub created by `./defs', rather than
writing it from scratch, and avoid obsolescent constructs.
* tests/subobj6.test: Add trailing `:' command. Move setting of
`errexit' shell flag earlier in the script (just after inclusion
of ./defs). Do not create useless dummy ac-init file `f'.
* tests/subobj7.test: Do not create useless dummy ac-init file
`f'.
(configure.in): Use the stub created by `./defs', rather than
writing it from scratch, and avoid obsolescent constructs.
* tests/subobj9.test: Move setting of `errexit' shell flag earlier
in the script (just after inclusion of ./defs). Fail the test if
`make distcheck' fails. Ensure verbose printing of captured make
stdout. Avoid uselsss fork by doing simple grep instead of using
test -n "`COMMAND | grep ...`".
(configure.in): Normalize the call to AC_INIT w.r.t. other tests.
(Makefile.am): Explicitly mark target "print" as phony.
* tests/subobj10.test: Removed duplicated call to `set -e'. Add
trailing `:' command.
(configure.in): Normalize the call to AC_INIT w.r.t. other tests.
|
|
|
22dfae32
|
2010-07-14T13:10:09
|
|
Remove a couple of obsoleted tests.
* tests/fpinstall.test: Removed.
* tests/fpinst2.test: Likewise.
* tests/Makefile.am (TESTS): Updated.
|
|
|
6d316dd0
|
2010-07-14T13:41:05
|
|
Minor improvements to tests ar*.test.
* tests/ar.test: Add trailing `:' command.
* tests/ar2.test: Likewise, and make grepping of generated
Makefile.in stricter.
|
|
|
e9f3c00a
|
2010-08-08T22:30:41
|
|
Fix maintainer-check failure.
* tests/cond5.test: Quote sleep argument, this isn't about
time stamp differences.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
e7aa360a
|
2010-08-06T00:40:55
|
|
Work around a nasty bug (segfault) of Solaris make.
* lib/am/check.am (recheck, recheck-html): Trim trailing spaces
from $list, to avoid triggering a nasty bug (potential segfault)
on Solaris make.
|
|
e3440915
|
2010-08-06T19:11:53
|
|
Make cond5.test more robust on MSYS.
* tests/cond5.test: Add delay before the first kill attempt to
cater for problems with MSYS bash.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
6f6e3288
|
2010-07-27T21:35:19
|
|
Fix AM_COND_IF for gone-invalid condition shell expression.
* m4/cond-if.m4 (AM_COND_IF): test contents of $COND_TRUE
variable, rather than re-evaluating the shell expression for
the condition.
* tests/cond40.test: Extend test.
* NEWS: Update.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
1f92ad1d
|
2010-07-27T21:20:04
|
|
Avoid syntax error if IF-TRUE part of AM_COND_IF expands empty.
* m4/cond-if.m4 (AM_COND_IF): Ensure IF-TRUE part is never empty
to avoid shell syntax error if the m4 expansion is empty.
* tests/cond40.test: Enhance test.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
c1361d43
|
2010-07-27T21:12:42
|
|
Coverage: bogus option to AM_INIT_AUTOMAKE.
* tests/init2.test: New test.
* tests/Makefile.am: Update.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
ee9fe91c
|
2010-06-19T14:55:10
|
|
Modernize and improve test scripts `subdir*.test'.
* tests/subdir.test: Enable `errexit' shell flag, and related
changes. Use the `configure.in' stub created by `./defs',
rather than writing one from scratch.
* tests/subdir2.test: Likewise.
* tests/subdir4.test: Likewise.
* tests/subdir3.test: Enable `errexit' shell flag, and related
changes. Do not create useless dummy source files.
* tests/subdir5.test: Make grepping of Makefile.in (in topdir
and in subdirs) stricter. Some minor changes to keep it more
in sync with the related test `subdir8.test'.
* tests/subdir8.test: Likewise (but with the related test being
`subdir5.test' here).
* tests/subdir6.test: Cosmetic change in spacing.
* tests/subdir9.test: Define and use new variable `$distdir'. Add
trailing `:' command.
* tests/subdir10.test: Cosmetic consistency-related change.
* tests/subdirbuiltsources.test: Cosmetic changes in spacings.
(configure.in): Use stub created by `./defs', rather than writing
it from scratch. Do not use obsoleted and/or deprecated forms of
autoconf/automake macros.
|
|
|
4deaab9e
|
2010-06-19T11:25:26
|
|
Modernize and improve test scripts `dist*.test'.
* tests/distcleancheck.test: Do not add useless `-e' option to
a $MAKE call. Extend test by grepping stderr of make.
* tests/distcom2.test: Do not run the same test script on the
Makefile.in twice, but save its output in an intermediate file
instead. Make grepping of DIST_COMMON definition stricter.
Display the content of more files, to ease debugging. Add a
trailing `:' command. Improved heading comments w.r.t. sister
test(s).
* tests/distcom6.test: Likewise, and avoid to uselessly run
autoconf.
* tests/distcom3.test: Ensure verbose printing of captured stdout
and stderr. Make grepping of captured stderr stricter. Also,
add trailing `:' command.
* tests/distcom4.test: Declare the target `test' in the generated
Makefile.am as `.PHONY'. Display content of more files, to ease
debugging. Add trailing `:' command.
* tests/distcom5.test: Likewise. Also, factor out common sed
script in subroutine `extract_distcommon'.
* tests/distcom7.test: Prefer cat + here-doc over echo to write
test Makefile.am files. Add a trailing `:' command.
* tests/distname.test: Prefer `gzip -d' over `gunzip'. Move the
call to `set -e' earlier. Be stricter and more verbose in the
checking of the generated tarball.
(configure.in): Use the stub provided by ./defs, instead of
writing it from scratch. Avoid obsoleted constructs. Remove
useless call to `AM_PROG_CC_C_O'.
* tests/distdir.test: Various minor improvements/normalizations.
* tests/distlinks.test: Likewise.
|
|
|
36fe4f38
|
2010-06-03T19:37:21
|
|
Improve and extend test cond5.test.
* tests/cond5.test: Do not blindly sleep 60 seconds before polling
the background automake process, but poll it every 10 seconds for
at most 30 times (this makes the test both faster on good machines,
and more resilient to spurious timeout-due failures when in low
priority or on havily-loaded systems).
Check also that automake writes the expected error messages on the
standard error.
Enable `errexit' flag, and related changes.
Rely on the `configure.in' stub created by `./defs', rather than
writing one from scratch.
|
|
|
799d2829
|
2010-06-26T14:12:07
|
|
Fix typo-related bug in test script silent5.test.
* tests/silent5.test: Use $EGREP, not $GREP (which is not even
defined).
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
76d8a53e
|
2010-06-25T17:19:44
|
|
Tests: remove useless repetitions of `foreign' automake option.
* tests/multlib.test (configure.in): Remove useless use of
`foreign' option in AM_INIT_AUTOMAKE (the `--foreign' option is
already in $AUTOMAKE by default, so no point in repeating it).
* tests/subobj10.test: Likewise.
* tests/subobj9.test: Likewise.
* tests/lex3.test (Makefile.am): Similarly, remove useless use
of `foreign' option in AUTOMAKE_OPTIONS.
* tests/lex5.test: Likewise.
* tests/pr279.test: Likewise.
* tests/pr279-2.test: Likewise.
* tests/specflg3.test: Likewise.
* tests/target-cflags.test: Likewise.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
e1030a6a
|
2010-06-25T17:30:36
|
|
Drop useless requirement "gzip" in lex5.test.
* tests/lex5.test ($required): Do not list "gzip", as it's
never used.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
2360b878
|
2010-06-24T21:33:09
|
|
Merge branch 'sl-yacc-work' into maint
* sl-yacc-work:
Fix minor testsuite issues, update docs, for Yacc/Lex changes.
Bugfix: $(AM_FLAGS)/$(FLAGS) precedence in Yacc/Lex.
New tests, for bugs in Yacc/Lex AM_FLAGS and FLAGS precedence.
|
|
|
89e0334a
|
2010-06-24T20:28:55
|
|
Merge branch 'silent5-fix' into maint
* silent5-fix:
Fix bugs in test script silent5.test.
|
|
|
5206e891
|
2010-06-23T21:56:04
|
|
Fix bugs in test script silent5.test.
* tests/silent5.test: Fixed a nasty bug (due to the use of grep
instead of egrep) that could have led to false negatives.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
bd50d9c1
|
2010-05-15T15:40:16
|
|
New test: distributed broken symlinks cause failure.
* tests/distlinksbrk.test: New test.
* tests/Makefile.am (TESTS): Updated accordingly.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
fee7d0d3
|
2010-06-21T20:56:08
|
|
Fix minor testsuite issues, update docs, for Yacc/Lex changes.
* doc/automake.texi (Yacc and Lex): Mention AM_YFLAGS, YFLAGS
and AM_LFLAGS, LFLAGS in the order in which they now appear in
the rules.
* NEWS: Update.
* tests/lflags.test, tests/lflags2.test, tests/yflags.test,
tests/yflags2.test: Prefer `make -e' over `make VAR=VAL', to
please maintainer-check. Ensure generated C files contain a
declaration, to please compilers.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
65a2059a
|
2010-06-08T16:32:40
|
|
Bugfix: $(AM_FLAGS)/$(FLAGS) precedence in Yacc/Lex.
* automake.in: Fix registration of languages "Lex", "Lex (C++)",
"Yacc" and "Yacc (C++)", so that $(LFLAGS) has precedence over
$(AM_LFLAGS) and $(YFLAGS) has precedence over $(AM_YFLAGS).
* tests/Makefile.am (XFAIL_TESTS): Updated accordingly.
* NEWS: Updated.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
3d461fdc
|
2010-06-08T16:32:40
|
|
New tests, for bugs in Yacc/Lex AM_FLAGS and FLAGS precedence.
* tests/lflags.test: New test, check that user $(LFLAGS) takes
precedence over automake (AM_LFLAGS) and (foo_LFLAGS). Still
xfailing.
* tests/lflags2.test: Likewise.
* tests/yflags.test: New test, check that user $(YFLAGS) takes
precedence over automake (AM_YFLAGS) and (foo_YFLAGS). Still
xfailing.
* tests/yflags2.test: Likewise.
* tests/Makefile.am (TESTS, XFAIL_TESTS): Extended accordingly.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
e8413c40
|
2010-06-19T17:32:31
|
|
Modernize, improve and extend tests `suffix*.test'.
* tests/suffix3.test: Enable `errexit' shell flag, and related
changes.
* tests/suffix4.test: Likewise.
* tests/suffix6.test: Likewise, and do not create a useless dummy
source file.
* tests/suffix7.test: Likewise.
* tests/suffix5.test: Enable `errexit' shell flag, and related
changes. Make grepping of Makefile.in slighty stricter.
* tests/suffix.test: Enable `errexit' shell flag, and related
changes. Also, do not redirect grep output to /dev/null, as this
might unmotivatedly hide useful information.
* tests/suffix2.test: Move setting of `errexit' shell flag earlier
in the script (just after inclusion of ./defs). Use a more
idiomatic way to count text occurrences in Makefile.in with
grep. Do not create useless dummy source files.
* tests/suffix10.test: Ensure verbose printing of captured make
stdout. Minor cosmetic changes.
* tests/suffix8.test: Likewise. Also, drop useless call to the
env(1) utility, and make grepping of make output stricter by using
$FGREP rather than plain grep.
* tests/suffix11.test: Likewise.
* tests/suffix12.test: Likewise.
* tests/suffix9.test: Prefet cat + here-doc over echo to append to
the `configure.in' stub. Cosmetic changes.
* tests/suffix13.test: Cosmetic spacing change.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
2be34841
|
2010-06-13T22:37:39
|
|
Add useful comment in test script ext.test.
* tests/ext.test: Add a comment explaining why an apparently
useless `if' statement is indeed required.
|
|
|
f5976391
|
2010-06-12T20:32:00
|
|
Add useful comment in test script obsolete.test.
* tests/obsolte.test: Add a comment explaining why we need
an indirection in adding $AUTOUPDATE to $required.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
0748837f
|
2010-06-09T02:59:22
|
|
Normalize whitespaces in 'tests/Makefile.am'.
* tests/Makefile.am (TESTS): Use only spaces, not tabs, in the
definition of this variable.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
ea2824f7
|
2010-06-12T14:15:42
|
|
Remove a couple of unneeded conditionals from tests.
* tests/pr243.test, tests/pr266.test, tests/strip.test: No need
for the FOOTEST conditional.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
96286138
|
2010-06-10T00:15:04
|
|
Modernize, improve and/or fix various test scripts.
* tests/symlink3.test: Deleted, separated into two new, more
complete tests ...
* tests/forcemiss.test: ... this one ...
* tests/forcemiss2.test: ... and this one.
* tests/symlink2.test: Enable `errexit' shell flag, make test
stricter, and skip it if symlink creation is not supported.
* tests/postproc.test: Enable `errexit' shell flag, related
changes, and a couple of unrelated cosmetic changes.
* tests/recurs.test: Use the `configure.in' stub created by
`./defs', rather than writing one from scratch. Make grepping
of Automake stderr slighty stricter.
* tests/substtarg.test: Likewise.
* tests/strip.test: Likewise, and move the call to `set -e'
earlier (just after the inclusion of `./defs'). Also, make sure
that the script installed by `make install-script' is equal to
the original one.
* tests/substref.test: Use the `configure.in' stub created by
`./defs', rather than writing one from scratch. Move the call
to `set -e' earlier (just after the inclusion of `./defs').
Avoid to explicitly export CC for configure (that's already done
in ./defs). Avoid potential problems with unpredictable make
output. Finally, make grepping of Makefile.in stricter.
* tests/substre2.test: Ensure verbose printing of the captured
make's output, and make its grepping slighty stricter.
* tests/cygwin32.test: Enable `errexit' shell flag, and related
changes. Also, do not create useless dummy source/data files.
* tests/scripts.test: Likewise.
* tests/recurs2.test: Likewise. Also, use the `configure.in'
stub created by `./defs'.
* tests/Makefile.am (TESTS): Updated.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
b563243e
|
2010-06-10T08:34:00
|
|
Modernize, improve and/or fix tests `pluseq*.test.
* tests/pluseq5.test: Append to configure.in using cat with an
here-doc, not using echo.
* tests/pluseq10.test: Make sure that the captured output of
`make' command is always displayed. Where possible, use $FGREP
instead of grep (this change makes some checks slighty stricter).
* tests/pluseq8.test: Enable `errexit' shell flag, with related
changes.
* tests/pluseq.test: Likewise. Also, do not create useless dummy
data files, and use better m4 quoting in generated configure.in.
* tests/pluseq2.test: Likewise. Also, append to configure.in
using cat with an here-doc, not using echo.
* tests/pluseq3.test: Likewise.
* tests/pluseq4.test: Likewise.
* tests/pluseq6.test: Likewise.
* tests/pluseq7.test: Do not create useless dummy source file.
* tests/pluseq9.test: Slighty extended w.r.t. the grepping of
Automake stderr. Some unrelated cosmetic changes.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
f2d7321b
|
2010-06-11T21:22:40
|
|
Testsuite: ensure verbose printing of captured stderr.
* tests/acloca18.test: Print captured stderr before either failing
or grepping it. Be sure to send captured stderr to stderr, not to
stdout.
* tests/ansi3b.test: Likewise.
* tests/cond39.test: Likewise.
* tests/configure.test: Likewise.
* tests/missing3.test: Likewise.
* tests/missing6.test: Likewise.
* tests/output-order.test: Likewise.
* tests/pr300-ltlib.test: Likewise.
* tests/python6.test: Likewise.
* tests/python7.test: Likewise.
* tests/python8.test: Likewise.
* tests/python9.test: Likewise.
* tests/subobj.test: Likewise.
* tests/vars3.test: Likewise.
* tests/missing4.test: Likewise, and fix a call to grep not to use
the `-c' flag.
* tests/ansi3.test: Likewise, and rely on the `configure.in' stub
created by `./defs', rather than writing one from scratch.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
c1f6cdbd
|
2010-06-11T17:19:20
|
|
Enable `errexit' shell flag in various tests.
* tests/backsl.test: Enable the `errexit' shell flag, and
related changes.
* tests/backsl2.test: Likewise.
* tests/block.test: Likewise.
* tests/canon2.test: Likewise.
* tests/canon4.test: Likewise.
* tests/comment2.test: Likewise.
* tests/condlib.test: Likewise.
* tests/cond15.test: Likewise, and prefer $FGREP over grep.
* tests/canon3.test: Likewise. Also, avoid to create an useless
dummy source file.
* tests/acoutpt2.test: Enable the `errexit' shell flag, and some
related changes. Do some cosmetic improvements in the generated
`configure.in' file.
* tests/cond4.test: Likewise.
* tests/cond14.test: Likewise.
* tests/condinc.test: Likewise.
* tests/cond7.test: Likewise. Also, remove useless setting of
AUTOMAKE_OPTIONS to `foreign' in the generated Makefile.am.
* tests/ansi.test: Enable the `errexit' shell flag, and related
changes. Extended, esp. by running autoconf, ./configure and
make, and by looking into the distdir.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
12e9334a
|
2010-04-26T10:46:43
|
|
Extend tests/README (trailing `:' in test scripts)
* tests/README (section "Writing test cases" subsection "Do"):
Explain why apparently redundant trailing `:' and `Exit 0' in
test scripts can indeed be useful.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
7c824078
|
2010-06-10T19:47:13
|
|
Testsuite now works with BSD make in parallel mode.
* tests/defs.in: Unset variables __MKLVL__ and MAKE_JOBS_FIFO,
which are exported by BSD make when run in parallel mode, and
which can confuse make processes spawned by our testsuite.
This change fixes a lot of spurious failure when the testsuite
is run with BSD make in parallel mode.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
8192eeb5
|
2010-05-08T01:27:36
|
|
Modernize, improve and/or fix various test scripts.
* tests/sanity.test: Rely on the `configure.in' stub created by
`./defs', rather than writing one from scratch.
* tests/depend2.test: Likewise. Also, call `set -e' just after
the inclusion of `./defs', instead that later in the script.
* tests/canon5.test: Avoid a useless `|| Exit 1' after a call to
$AUTOMAKE, and improve the positioning of an $ACLOCAL call.
* tests/exeext4.test: Use $FGREP instead of grep, where possible.
Make auxiliary rules in the generated Makefile more silent.
These changes make some checks slighty stricter.
* tests/ext2.test: Call `Exit 1' if inclusion of `./defs' fails.
* tests/gettext2.test: Place final `:' at the end of the script,
rather than in the middle.
* tests/exeext.test: Call `set -e' just after the inclusion of
`./defs', instead that later in the script.
* tests/extra5.test: Likewise.
* tests/confdeps.test: Likewise. Also, prefer `mv -f' over
plain `mv', just to be sure.
* tests/depcomp.test: Enable `errexit' shell flag, with related
changes. Also, modernize the generated configure.in.
* tests/cond9.test: Likewise. Also, rely on the `configure.in'
stub created by `./defs', rather than writing one from scratch.
* tests/cond10.test: Likewise.
* tests/depcomp2.test: Likewise.
* tests/depend3.test: Likewise.
* tests/distcom7.test: Likewise.
* tests/fortdep.test: Likewise. Also, remove definition of
AUTOMAKE_OPTIONS to `foreign' in the generated Makefile.am,
since that flag is already provided by $AUTOMAKE.
* tests/mdate.test: Made stricter, by checking that Automake
actually failed, and by making a stricter grep on the error
message. Also, set shell `errexit flag'.
* tests/python2.test: Improved verbose messages.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
4c86864a
|
2010-06-06T21:08:59
|
|
Make test `ammissing.test' stricter.
* tests/ammissing.test: Fail if $ACLOCAL succeds unexpectedly.
Enable `errexit' shell flag.
|
|
|
716a33f9
|
2010-06-08T16:09:18
|
|
Enable `errexit' shell flag in some test scripts.
* tests/subcond.test: Enabled `errexit' shell flag, and related
minor changes.
* tests/subst.test: Likewise.
* tests/tags.test: Likewise.
* tests/unused.test: Likewise.
* tests/vars.test: Likewise.
* tests/version4.test: Likewise.
* tests/vpath.test: Likewise.
* tests/vtexi2.test: Likewise.
* tests/werror.test: Likewise.
* tests/whoami.test: Likewise.
* tests/acsilent.test: Likewise, and don't use a command
substitution that can be easily avoided.
* tests/version.test: Enabled `errexit' shell flag, and related
minor changes. Also, avoid deprecated constructs in the generated
`configure.in'.
* tests/version2.test: Likewise.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
e3c82b94
|
2010-06-06T17:02:56
|
|
Prefer AUTOMAKE_fails over `$AUTOMAKE | grep' in tests.
* tests/ldadd.test: Enable errexit. Use AUTOMAKE_fails so
the verbose log contains all output.
* tests/mdate.test: Likewise.
Prompted by Stefano Lattarini's change to discover.test.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
ac61ca33
|
2010-05-08T02:25:50
|
|
Improve tests link*.test (enable `set -e').
* tests/link_c_cxx.test: Enable `errexit shell flag, and related
changes. Also, do not create useless source files.
* tests/link_dist.test: Likewise.
* tests/link_f90_only.test: Likewise.
* tests/link_f_only.test: Likewise.
* tests/link_fc.test: Likewise.
* tests/link_fccxx.test: Likewise.
* tests/link_fcxx.test: Likewise.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
12147010
|
2010-06-06T14:20:29
|
|
Improve ext.test semantics, avoid OpenBSD sh errexit issue.
* tests/ext.test: Inside shell compound command, use
`if $cmd; then Exit 1; fi' rather than `$cmd && Exit 1', to
fix failure with OpenBSD sh introduced with last patch.
Actually ensure that a rule for .EXT.o is created for each
known extension EXT.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
949d1f0e
|
2010-05-27T07:49:04
|
|
Enable `errexit' shell flag in some test scripts.
* tests/dash.test: Enable `errexit' shell flag, and related
changes.
* tests/defun.test: Likewise.
* tests/defun2.test: Likewise.
* tests/dejagnu.test: Likewise.
* tests/double.test: Likewise.
* tests/distcom2.test: Likewise.
* tests/empty2.test: Likewise.
* tests/empty3.test: Likewise.
* tests/empty4.test: Likewise.
* tests/exdir.test: Likewise.
* tests/ext.test: Likewise.
* tests/extra.test: Likewise.
* tests/extra2.test: Likewise.
* tests/extra3.test: Likewise.
* tests/extra4.test: Likewise.
* tests/flibs.test: Likewise.
* tests/fnoc.test: Likewise.
* tests/fo.test: Likewise.
* tests/instexec.test: Likewise.
* tests/ltdeps.test: Likewise.
* tests/nodep.test: Likewise.
* tests/nodepcomp.test: Likewise.
* tests/f90only.test: Likewise, and remove botched/obsoleted
comments and unecessary commands.
* tests/fonly.test: Likewise, and removed botched/obsolted
comments and unecessary commands.
* tests/discover.test: Likewise, and made stricter.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
71288283
|
2010-04-27T12:33:32
|
|
Enable `errexit' shell flag in all tests cxx*.test.
* tests/cxx.test: Add call to `set -e'. Related changes.
Bumped copyright years.
* tests/cxxansi.test: Likewise.
* tests/cxxcpp.test: Likewise.
* tests/cxxlibobj.test: Likewise.
* tests/cxxlink.test: Likewise.
* tests/cxxo.test: Likewise.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
d18bf57d
|
2010-04-27T14:33:14
|
|
Enable `errexit' shell flag in various tests.
* tests/acoutnoq.test: Enabled `errexit' shell flag, and related
minor changes.
* tests/acoutpt.test: Likewise.
* tests/acoutqnl.test: Likewise.
* tests/amassign.test: Likewise.
* tests/ansi2.test: Likewise.
* tests/ansi4.test: Likewise.
* tests/badprog.test: Likewise.
* tests/checkall.test: Likewise.
* tests/clean.test: Likewise.
* tests/colneq2.test: Likewise.
* tests/colon.test: Likewise.
* tests/colon5.test: Likewise.
* tests/colon6.test: Likewise.
* tests/comment.test: Likewise.
* tests/compile_f90_c_cxx.test: Likewise.
* tests/compile_f_c_cxx.test: Likewise.
* tests/cond3.test: Likewise.
* tests/cond6.test: Likewise.
* tests/cond13.test: Likewise.
* tests/conf2.test: Likewise.
* tests/confvar.test: Likewise.
* tests/confvar2.test: Likewise.
* tests/cond8.test: Likewise, plus a cosmetic change.
* tests/confh4.test: Likewise. Also, add in the heading comments
an excerpt from the original bug report which motivated the
creation of this test, to make its purpose clearer.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
f3f323e0
|
2010-04-27T02:06:05
|
|
Tests on extensibility of silent-rules made stricter.
* tests/silent6.test: Made stricter w.r.t. the grepping of the
output produced by `make'.
* tests/silent7.test: Likewise.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|