kmx git

Commit	Date	Message
d0cfb4e1	2022-01-11T10:54:10	Update all copyright notices.
0d343863	2021-08-17T17:27:36	[meson] Change Zlib configuration option. * meson_options.txt, meson.build: Change the format of the 'zlib' meson build configuration option to be a combo with the following choices: - none: Do not support gzip-compressed streams at all. - internal: Support gzip-compressed streams using the copy of the gzip sources under `src/gzip/`; this should only be used during development to ensure these work properly. - external: Support gzip-compressed streams using the 'zlib' Meson subproject, linked as a static library. - system: Support gzip-compressed streams using a system-installed version of zlib. - auto: Support gzip-compressed streams using a system-installed version of zlib, if available, or using the 'zlib' subproject otherwise. This is the default. - disabled: Backward-compatible alias for 'none'. - enabled: Backward-compatible alias for 'auto'.
d6a5c577	2021-12-13T23:40:16	* meson.build: Optimize lookup for `python3` program. The python module's `find_installation` method is intended to provide routines for compiling and installing python modules into the `site-packages` directory. It does a couple of slow things, including run an introspection command to scrape sysconfig info from the detected interpreter, which are not needed for the sole use case of invoking the found installation as an executable. Furthermore, when invoked without the name or path of a python binary, it is hardcoded to always look for `python3` corresponding to the interpreter meson itself uses to run. So using `find_installation` did not even allow detecting `python2` as a fallback. Instead, switch to a simple `find_program` lookup that finishes as soon as the program is found.
e342f83c	2021-12-13T22:50:18	* meson.build: Check the return value of `run_command`. By default, errors are not checked and a command that is somehow broken will just capture incorrect output (likely an empty string). Current development versions of meson now raise a warning for this implicit behavior, and advise explicitly setting the `check:` keyword argumend to determine whether a failing return code should be considered an error. Since none of the commands in this project are expected to fail, mark them as required to succeed.
407f31ff	2021-11-21T11:01:37	meson.build: Initialize `common_ldflags`.
896630be	2021-11-21T07:58:50	* meson.build: Fix compatibility version on MacOS. Fixes #1117.
842ec5ed	2021-10-07T00:46:14	meson.build (gen_docs): Use `current_source_dir` instead of `source_root`. These two are not equal when FreeType is used as a subproject, such as in `freetype-demos`. In that case, `source_root` points at the root project, causing the docs build to fail.
09195a82	2021-08-02T12:55:28	* meson.build: Fix zlib support. This commit synchronizes zlib support with both autotools and cmake: If no external zlib is found (or intentionally disabled on the command line), use the internal zlib by undefining `FT_CONFIG_OPTION_SYSTEM_ZLIB` without modifying `FT_CONFIG_OPTION_USE_ZLIB`. Also improve summary output. Problem reported by Moazin.
47b1a541	2021-07-27T23:30:16	* meson.build: Honor `--includedir` instead of hard-coding 'include'. Signed-off-by: Heiko Becker <heirecka@exherbo.org>
c5516e0f	2021-07-12T09:22:48	* meson.build: Fix build for other UNIX systems (e.g., FreeBSD). Without this change the build of `unix/ftsystem.c` fails because the `ftconfig.h` header that defines macros such as `HAVE_UNISTD_H` and `HAVE_FCNTL_H` is only being generated for Linux, macOS, and Cygwin systems: ``` .../builds/unix/ftsystem.c:258:32: error: use of undeclared identifier 'O_RDONLY' file = open( filepathname, O_RDONLY ); ``` Instead of hardcoding a list of operating systems for this check, update the logic that decides whether to build the file and set a boolean flag that can be checked instead.
50d0033f	2021-07-05T05:44:13	meson.build: Minor doc fix.
a399fb89	2021-07-03T16:34:01	meson.build: Minor doc improvements.
6f273f68	2021-06-15T23:12:57	[meson] Add first regression test to FreeType * tests/README.md: documentation explaining how to build and run the tests with the Meson build. * tests/scripts/download-test-fonts.sh: Simple script to download test font files to the 'tests/data/' folder. * meson.build, meson_options.txt, tests/meson.build: Add 'tests' option to enable building and running the test programs, disabled by default. * tests/issue-1063/main.c: Simple regression test to exhibit issue 1063. * .gitignore: Ignore the content of the tests/data/ folder for now.
16947c0e	2021-05-23T05:36:16	* meson.build (ft2_public_headers): Add missing `ftcid.h'. Fixes #1058.
fedd945c	2021-03-08T10:30:57	meson.build: Minor formatting.
7252e35e	2021-03-07T18:13:59	[meson] Fix 'mmap' handling on Windows. * meson.build (ft2_sources): Always use `windows/ftsystem.c` on Windows unless mmap has been disabled. https://gitlab.freedesktop.org/freetype/freetype/-/merge_requests/5#note_829289
bb42afbd	2021-01-17T15:50:08	[meson] Add subproject fallbacks for 'libpng' and 'zlib'. * subprojects/libpng.wrap, subprojects/zlib.wrap: New files. * meson.build: Updated.
d69d9c23	2021-02-13T16:32:26	[meson] Make it work with Windows. * meson.build: Do not process `ftconfig.h` when not using `ftconfig.h.in`. Fixes #1029.
cc90307d	2021-02-10T09:30:40	* meson.build: s/freetype2_dep/freetype_dep/. Many projects (e.g., fontconfig, cairo) hardcode the `freetype_dep` variable name to use FreeType as subproject because that was the variable name in Centricular's Meson port of FreeType. While they should stop hardcoding that variable name, it does not cost us anything to keep using that name to ease transition.
3dbdb78a	2021-02-10T09:25:42	[meson] Fix handling of HarfBuzz library. * meson.build (harfbuzz_dep): Do not fall back to HarfBuzz by default. Otherwise it causes a dependency cycle: cairo => fontconfig => freetype2 => harfbuzz => cairo Meson will still fall back to HarfBuzz subprojects if the `harfbuzz` option is set to `enabled` instead of `auto` and a `subprojects/harfbuzz.wrap` file is present. In that case it is the responsibility of the main project to set the proper options on each subproject to break the dependency cycle. Fixes: #1028.
2c405596	2020-10-26T14:56:05	Meson: Fix dependency lookup and generate ftconfig.h [meson] Fix dependency lookup and generate `ftconfig.h`. - zlib: If not found on the system, meson can build it as a subproject. We thus never use the (outdated) zlib support that comes with FreeType. Doing so has the additional advantage that the zlib code can be shared with other projects like GLib if both are subprojects of an application. - harfbuzz: Build as a subproject if not found on the system. - 'QUESTION: What if the compiler doesn't support `-D` but uses `/D` instead as on Windows?' Answer: Meson translate arguments for us. - visibility: Replace self-made code with meson-specific solution. * meson.build (ft2_defines): Rewrite logic to set and handle it. (process_header_command): New variable, previously called `ftoption_command`. (ftoption_command, ftconfig_command): New variables. (zlib_option): Removed. (zlib_dep): New variable. (ft2_deps): Updated. (harfbuzz_dep): Updated. (ftconfig_h_in, ftconfig_h): New variables. (ft2_sources): Updated. (ft2_lib): Updated, handle visibility. (summary): Updted. * meson_options.txt (zlib): Updated.
e11cc40a	2020-10-26T14:21:19	* meson.build: Fix resource compilation on Windows. This is copied from GStreamer's meson port of FreeType. (ft2_sources): Add both debug and resource file (the latter for Windows only). (ft2_debug_src): Removed.
69e0faa8	2020-10-26T13:39:19	* meson.build: s/ft2_libtool_version/ft2_pkgconfig_version/. (freetype2_dep): Use it. `ft2_libtool_version` would be the shared library version, not the one we should use in file `freetype2.pc`.
0565c5ba	2020-10-26T11:31:19	* meson.build: Use `meson.override_dependency`. This is a new meson mechanism to avoid other projects to hard-code the `freetype2_dep` variable name in their build definition. It also ensures that meson does not mix system and subproject versions of FreeType inside of the same project. Also remove outdated TODO because `declare_dependency` was already there.
5c81e09b	2020-10-26T11:26:04	* meson.build (bzip2_dep): Simplify. We remove `static:false` from `find_library('bz2')`. I don't know whether the previous code was a workaround for an old meson bug, but at least with version >=0.55.0 (which FreeType uses) it picks the shared library when both are available. With this commit, file `freetype2.pc` no longer contains the full path to file `libbz2.so`; instead, it correctly uses `-lbz2`. Note that this is a meson bug is still present in the current version (0.57.0).
1b69fb9b	2020-10-26T11:25:08	* meson.build: Set project version.
bb33f03a	2021-01-27T06:43:41	* builds/windows/ftsystem.c: Add shared memory support on Windows.
209e9841	2021-01-23T14:15:29	Require HarfBuzz 2.0.0. This is needed to make commit f1f9705f9 work. * CMakeLists.txt (HARFBUZZ_MIN_VERSION), builds/unix/configure.raw (harfbuzz_pkg), meson.build (harfbuzz_dep): Updated.
b6e8a712	2021-01-17T07:18:48	Update all copyright notices.
f88c00e4	2021-01-06T19:19:29	* meson.build: Add summary. Based on a patch from Vincent Torri <vincent.torri@gmail.com>.
c6345ca3	2021-01-06T08:55:16	* meson.build: Fix 'png' build option (#59458). Without this patch, 'png' is always required.
768022b9	2020-12-23T11:30:19	meson.build (ft2_defines): Fix builds on Windows.
26e2a895	2020-11-04T21:00:22	* meson.build: Fix .pc file generation. For backwards compatibility we need the libtool version, not the .so number. Reported by Nikolaus.
40c5681a	2020-10-26T18:09:56	* meson.build: Fix 'harfbuzz' and 'brotli' build options (#59347). Without this patch, 'harfbuzz' and 'brotli' are always required. Patch submitted anonymously in Savannah bug report.
3ce0df52	2020-09-22T20:05:37	[meson] Move auxiliary scripts to `builds/meson`. Suggested by Alexei. * scripts/.py: Move meson scripts to... builds/meson/.py: ... this new location. meson.build: Updated.
66978a58	2020-05-17T18:45:41	Add Meson build project file. Example usage: # Configure Meson build in directory `build-meson` to generate # release binaries comparable to to the ones from the # autotools/make build system. meson setup build-meson \ --prefix=/usr/local \ --buildtype=debugoptimized \ --strip \ -Db_ndebug=true # After configuring the Meson build with the above command, # compile and install to `/usr/local/`; this includes a pkg-config # file. ninja -C build-meson install # Alternatively, compile and install to `/tmp/aa/usr/local/...` # for packaging. DESTDIR=/tmp/aa ninja -C build-meson install # Generate documentation under `build-meson/docs`. ninja -C build-meson docs Library size comparison for stripped `libfreetype.so` generated by all three build systems: - Default build (autotools + libtool): 712 KiB - CMake build (RelWithDebInfo): 712 KiB - Meson build: 712 KiB * meson.build: New top-level Meson build file for the library. * meson_options.txt: New file. It holds user-selectable options for the build, which can be printed with `meson configure`, and selected at `meson setup` or `meson --reconfigure` time with `-D<option>=<value>`. * scripts/parse_modules_cfg.py: A script invoked by `meson.build` to parse `modules.cfg` and extract important information out of it (i.e., the list of modules). * scripts/process_ftoption_h.py: New script invoked by `meson.build` to process the original `ftoption.h` file. It enables or disables configuration macro variables based on the available dependencies. This is similar to what other build systems are using (i.e., Meson's `configure_file()` command is not used here). * scripts/extract_freetype_version.py: New script invoked by `meson.build` to extract the FreeType version number from `<freetype/freetype.h>`. * scripts/extract_libtool_version.py: New script invoked by `meson.build` to extract the libtool `revision_info` data from `builds/unix/configure.raw`, and to generate the corresponding shared library suffix. * scripts/generate_reference_docs.py: New script invoked by `meson.build` to generate the FreeType 2 reference documentation (using the `docwriter` and `mkdocs` packages, which must be already installed).

d0cfb4e1

2022-01-11T10:54:10

Update all copyright notices.

0d343863

2021-08-17T17:27:36

[meson] Change Zlib configuration option. * meson_options.txt, meson.build: Change the format of the 'zlib' meson build configuration option to be a combo with the following choices: - none: Do not support gzip-compressed streams at all. - internal: Support gzip-compressed streams using the copy of the gzip sources under `src/gzip/`; this should only be used during development to ensure these work properly. - external: Support gzip-compressed streams using the 'zlib' Meson subproject, linked as a static library. - system: Support gzip-compressed streams using a system-installed version of zlib. - auto: Support gzip-compressed streams using a system-installed version of zlib, if available, or using the 'zlib' subproject otherwise. This is the default. - disabled: Backward-compatible alias for 'none'. - enabled: Backward-compatible alias for 'auto'.

d6a5c577

2021-12-13T23:40:16

* meson.build: Optimize lookup for `python3` program. The python module's `find_installation` method is intended to provide routines for compiling and installing python modules into the `site-packages` directory. It does a couple of slow things, including run an introspection command to scrape sysconfig info from the detected interpreter, which are not needed for the sole use case of invoking the found installation as an executable. Furthermore, when invoked without the name or path of a python binary, it is hardcoded to always look for `python3` corresponding to the interpreter meson itself uses to run. So using `find_installation` did not even allow detecting `python2` as a fallback. Instead, switch to a simple `find_program` lookup that finishes as soon as the program is found.

e342f83c

2021-12-13T22:50:18

* meson.build: Check the return value of `run_command`. By default, errors are not checked and a command that is somehow broken will just capture incorrect output (likely an empty string). Current development versions of meson now raise a warning for this implicit behavior, and advise explicitly setting the `check:` keyword argumend to determine whether a failing return code should be considered an error. Since none of the commands in this project are expected to fail, mark them as required to succeed.

407f31ff

2021-11-21T11:01:37

meson.build: Initialize `common_ldflags`.

896630be

2021-11-21T07:58:50

* meson.build: Fix compatibility version on MacOS. Fixes #1117.

842ec5ed

2021-10-07T00:46:14

meson.build (gen_docs): Use `current_source_dir` instead of `source_root`. These two are not equal when FreeType is used as a subproject, such as in `freetype-demos`. In that case, `source_root` points at the root project, causing the docs build to fail.

09195a82

2021-08-02T12:55:28

* meson.build: Fix zlib support. This commit synchronizes zlib support with both autotools and cmake: If no external zlib is found (or intentionally disabled on the command line), use the internal zlib by undefining `FT_CONFIG_OPTION_SYSTEM_ZLIB` without modifying `FT_CONFIG_OPTION_USE_ZLIB`. Also improve summary output. Problem reported by Moazin.

47b1a541

2021-07-27T23:30:16

* meson.build: Honor `--includedir` instead of hard-coding 'include'. Signed-off-by: Heiko Becker <heirecka@exherbo.org>

c5516e0f

2021-07-12T09:22:48

* meson.build: Fix build for other UNIX systems (e.g., FreeBSD). Without this change the build of `unix/ftsystem.c` fails because the `ftconfig.h` header that defines macros such as `HAVE_UNISTD_H` and `HAVE_FCNTL_H` is only being generated for Linux, macOS, and Cygwin systems: ``` .../builds/unix/ftsystem.c:258:32: error: use of undeclared identifier 'O_RDONLY' file = open( filepathname, O_RDONLY ); ``` Instead of hardcoding a list of operating systems for this check, update the logic that decides whether to build the file and set a boolean flag that can be checked instead.

50d0033f

2021-07-05T05:44:13

meson.build: Minor doc fix.

a399fb89

2021-07-03T16:34:01

meson.build: Minor doc improvements.

6f273f68

2021-06-15T23:12:57

[meson] Add first regression test to FreeType * tests/README.md: documentation explaining how to build and run the tests with the Meson build. * tests/scripts/download-test-fonts.sh: Simple script to download test font files to the 'tests/data/' folder. * meson.build, meson_options.txt, tests/meson.build: Add 'tests' option to enable building and running the test programs, disabled by default. * tests/issue-1063/main.c: Simple regression test to exhibit issue 1063. * .gitignore: Ignore the content of the tests/data/ folder for now.

16947c0e

2021-05-23T05:36:16

* meson.build (ft2_public_headers): Add missing `ftcid.h'. Fixes #1058.

fedd945c

2021-03-08T10:30:57

meson.build: Minor formatting.

7252e35e

2021-03-07T18:13:59

[meson] Fix 'mmap' handling on Windows. * meson.build (ft2_sources): Always use `windows/ftsystem.c` on Windows unless mmap has been disabled. https://gitlab.freedesktop.org/freetype/freetype/-/merge_requests/5#note_829289

bb42afbd

2021-01-17T15:50:08

[meson] Add subproject fallbacks for 'libpng' and 'zlib'. * subprojects/libpng.wrap, subprojects/zlib.wrap: New files. * meson.build: Updated.

d69d9c23

2021-02-13T16:32:26

[meson] Make it work with Windows. * meson.build: Do not process `ftconfig.h` when not using `ftconfig.h.in`. Fixes #1029.

cc90307d

2021-02-10T09:30:40

* meson.build: s/freetype2_dep/freetype_dep/. Many projects (e.g., fontconfig, cairo) hardcode the `freetype_dep` variable name to use FreeType as subproject because that was the variable name in Centricular's Meson port of FreeType. While they should stop hardcoding that variable name, it does not cost us anything to keep using that name to ease transition.

3dbdb78a

2021-02-10T09:25:42

[meson] Fix handling of HarfBuzz library. * meson.build (harfbuzz_dep): Do not fall back to HarfBuzz by default. Otherwise it causes a dependency cycle: cairo => fontconfig => freetype2 => harfbuzz => cairo Meson will still fall back to HarfBuzz subprojects if the `harfbuzz` option is set to `enabled` instead of `auto` and a `subprojects/harfbuzz.wrap` file is present. In that case it is the responsibility of the main project to set the proper options on each subproject to break the dependency cycle. Fixes: #1028.

2c405596

2020-10-26T14:56:05

Meson: Fix dependency lookup and generate ftconfig.h [meson] Fix dependency lookup and generate `ftconfig.h`. - zlib: If not found on the system, meson can build it as a subproject. We thus never use the (outdated) zlib support that comes with FreeType. Doing so has the additional advantage that the zlib code can be shared with other projects like GLib if both are subprojects of an application. - harfbuzz: Build as a subproject if not found on the system. - 'QUESTION: What if the compiler doesn't support `-D` but uses `/D` instead as on Windows?' Answer: Meson translate arguments for us. - visibility: Replace self-made code with meson-specific solution. * meson.build (ft2_defines): Rewrite logic to set and handle it. (process_header_command): New variable, previously called `ftoption_command`. (ftoption_command, ftconfig_command): New variables. (zlib_option): Removed. (zlib_dep): New variable. (ft2_deps): Updated. (harfbuzz_dep): Updated. (ftconfig_h_in, ftconfig_h): New variables. (ft2_sources): Updated. (ft2_lib): Updated, handle visibility. (summary): Updted. * meson_options.txt (zlib): Updated.

e11cc40a

2020-10-26T14:21:19

* meson.build: Fix resource compilation on Windows. This is copied from GStreamer's meson port of FreeType. (ft2_sources): Add both debug and resource file (the latter for Windows only). (ft2_debug_src): Removed.

69e0faa8

2020-10-26T13:39:19

* meson.build: s/ft2_libtool_version/ft2_pkgconfig_version/. (freetype2_dep): Use it. `ft2_libtool_version` would be the shared library version, not the one we should use in file `freetype2.pc`.

0565c5ba

2020-10-26T11:31:19

* meson.build: Use `meson.override_dependency`. This is a new meson mechanism to avoid other projects to hard-code the `freetype2_dep` variable name in their build definition. It also ensures that meson does not mix system and subproject versions of FreeType inside of the same project. Also remove outdated TODO because `declare_dependency` was already there.

5c81e09b

2020-10-26T11:26:04

* meson.build (bzip2_dep): Simplify. We remove `static:false` from `find_library('bz2')`. I don't know whether the previous code was a workaround for an old meson bug, but at least with version >=0.55.0 (which FreeType uses) it picks the shared library when both are available. With this commit, file `freetype2.pc` no longer contains the full path to file `libbz2.so`; instead, it correctly uses `-lbz2`. Note that this is a meson bug is still present in the current version (0.57.0).

1b69fb9b

2020-10-26T11:25:08

* meson.build: Set project version.

bb33f03a

2021-01-27T06:43:41

* builds/windows/ftsystem.c: Add shared memory support on Windows.

209e9841

2021-01-23T14:15:29

Require HarfBuzz 2.0.0. This is needed to make commit f1f9705f9 work. * CMakeLists.txt (HARFBUZZ_MIN_VERSION), builds/unix/configure.raw (harfbuzz_pkg), meson.build (harfbuzz_dep): Updated.

b6e8a712

2021-01-17T07:18:48

Update all copyright notices.

f88c00e4

2021-01-06T19:19:29

* meson.build: Add summary. Based on a patch from Vincent Torri <vincent.torri@gmail.com>.

c6345ca3

2021-01-06T08:55:16

* meson.build: Fix 'png' build option (#59458). Without this patch, 'png' is always required.

768022b9

2020-12-23T11:30:19

meson.build (ft2_defines): Fix builds on Windows.

26e2a895

2020-11-04T21:00:22

* meson.build: Fix .pc file generation. For backwards compatibility we need the libtool version, not the .so number. Reported by Nikolaus.

40c5681a

2020-10-26T18:09:56

* meson.build: Fix 'harfbuzz' and 'brotli' build options (#59347). Without this patch, 'harfbuzz' and 'brotli' are always required. Patch submitted anonymously in Savannah bug report.

3ce0df52

2020-09-22T20:05:37

[meson] Move auxiliary scripts to `builds/meson`. Suggested by Alexei. * scripts/*.py: Move meson scripts to... * builds/meson/*.py: ... this new location. * meson.build: Updated.

66978a58

2020-05-17T18:45:41

Add Meson build project file. Example usage: # Configure Meson build in directory `build-meson` to generate # release binaries comparable to to the ones from the # autotools/make build system. meson setup build-meson \ --prefix=/usr/local \ --buildtype=debugoptimized \ --strip \ -Db_ndebug=true # After configuring the Meson build with the above command, # compile and install to `/usr/local/`; this includes a pkg-config # file. ninja -C build-meson install # Alternatively, compile and install to `/tmp/aa/usr/local/...` # for packaging. DESTDIR=/tmp/aa ninja -C build-meson install # Generate documentation under `build-meson/docs`. ninja -C build-meson docs Library size comparison for stripped `libfreetype.so` generated by all three build systems: - Default build (autotools + libtool): 712 KiB - CMake build (RelWithDebInfo): 712 KiB - Meson build: 712 KiB * meson.build: New top-level Meson build file for the library. * meson_options.txt: New file. It holds user-selectable options for the build, which can be printed with `meson configure`, and selected at `meson setup` or `meson --reconfigure` time with `-D<option>=<value>`. * scripts/parse_modules_cfg.py: A script invoked by `meson.build` to parse `modules.cfg` and extract important information out of it (i.e., the list of modules). * scripts/process_ftoption_h.py: New script invoked by `meson.build` to process the original `ftoption.h` file. It enables or disables configuration macro variables based on the available dependencies. This is similar to what other build systems are using (i.e., Meson's `configure_file()` command is not used here). * scripts/extract_freetype_version.py: New script invoked by `meson.build` to extract the FreeType version number from `<freetype/freetype.h>`. * scripts/extract_libtool_version.py: New script invoked by `meson.build` to extract the libtool `revision_info` data from `builds/unix/configure.raw`, and to generate the corresponding shared library suffix. * scripts/generate_reference_docs.py: New script invoked by `meson.build` to generate the FreeType 2 reference documentation (using the `docwriter` and `mkdocs` packages, which must be already installed).

kc3-lang/freetype/meson.build

meson.build

Log