|
083e3615
|
2014-04-14T20:33:15
|
|
Adjust the bxf sleep time according to the number of chips detected
|
|
|
29998c2c
|
2014-04-14T20:15:41
|
|
Fix off by one error in bxf chip count when adjusting device size
|
|
|
c72d7a78
|
2014-04-10T18:22:19
|
|
Call any BXF device with 3-6 chips reported HXF
|
|
|
cf4e2841
|
2014-04-05T10:18:53
|
|
Recognise variations on BXF based on chip value returned in responses
|
|
|
c0627c6a
|
2014-04-03T20:40:03
|
|
Allow an arbitrary number of chips in the BXF driver, showing results from each chip in the API and identify the hexfury, naming it HXF
|
|
|
96a5c526
|
2014-04-03T11:09:33
|
|
Make the bxf bits configurable on the command line
|
|
|
68ddec22
|
2014-03-28T17:16:33
|
|
Display BF1 serial number as its unique identifier
|
|
|
139dac06
|
2014-03-06T11:26:24
|
|
Make bxm bits configurable.
|
|
|
2c2e1348
|
2014-03-05T22:33:54
|
|
Do a shutdown routine on bxm close.
|
|
|
0b014f78
|
2014-03-05T22:27:13
|
|
Provide support for 2 chips in libbitfury sendhashdata and enable the 2nd chip on BXM devices.
|
|
|
1a838240
|
2014-03-02T23:09:11
|
|
Generalise more of libbitfury for more reuse in both nf1 and bxm drivers.
|
|
|
b619b207
|
2014-03-02T22:58:54
|
|
Remove redundant init components of bxm driver.
|
|
|
9033a183
|
2014-03-02T22:52:03
|
|
Set default osc6 bits on bxm to 50
|
|
|
d894a6d4
|
2014-03-02T22:46:54
|
|
Enable the transaction translator emulator for bxm devices and use a dummy spi tx the size of a normal payload.
|
|
|
45e79e8c
|
2014-03-02T22:35:21
|
|
Add bxm scan function and check spi txrx returns only as much as sent.
|
|
|
61a04056
|
2014-03-02T16:21:59
|
|
Add init sequence to bxm detect one.
|
|
|
5107a133
|
2014-03-02T16:04:15
|
|
Add a bxm specific txrx function for spi transfers.
|
|
|
b33b6171
|
2014-03-02T15:32:15
|
|
Add bxm close to bitfury shutdown switch.
|
|
|
a7549891
|
2014-03-02T15:30:46
|
|
Add reset/purge/cshigh/low sequence to bxm init
|
|
|
4a6c637c
|
2014-03-02T14:21:10
|
|
Add bitmode init to bxm open sequence.
|
|
|
917507ec
|
2014-03-02T13:59:59
|
|
Add initial bxm opening sequence for detect one.
|
|
|
c76647f2
|
2014-02-23T16:45:04
|
|
Use the share_work_tdiff function in the driver watchdogs.
|
|
|
257fe00a
|
2014-02-18T22:19:45
|
|
Move driver statline padding to cgminer.c, expanding width of maximum displayable statistics and window width to add more info.
|
|
|
fc3f1100
|
2014-02-15T08:49:41
|
|
Detect non-responsive bitfury devices and try a usb reset on them before killing their instances off after 2 minutes of no activity.
|
|
|
5cda70e7
|
2014-02-14T08:09:17
|
|
Update various copyright dates
|
|
|
bac9d6f3
|
2014-02-13T21:13:20
|
|
Reuse the cgpu temp entry for avalon and bitfury devices, changing avalon to a damped value.
|
|
|
d73ac707
|
2014-02-08T21:04:18
|
|
Remove bitfury devices from the usb list on shutdown in case they have stopped responding but have not had a fatal usb error.
|
|
|
b535bc08
|
2014-01-26T22:23:31
|
|
Set info work to null after it is freed in nf1 after a restart to prevent double free later.
|
|
|
8d7d764f
|
2014-01-23T23:19:19
|
|
Change the default clockspeed bits on nanofury devices to 50 and add a command line option to allow it to be changed.
|
|
|
22a855c1
|
2014-01-09T16:06:46
|
|
Set the mcp2210 transfer setting only when it changes.
|
|
|
a7f89391
|
2014-01-09T15:49:12
|
|
Only perform spi reset on init, not with each transaction.
|
|
|
8c603e47
|
2014-01-09T15:33:24
|
|
Remove spi_detect_bitfury at nanofury startup and fix incorrect refresh time.
|
|
|
e8aca49b
|
2014-01-09T15:26:34
|
|
Use a simple serialised work model for nanofury
|
|
|
e97aa32c
|
2014-01-09T15:20:40
|
|
Use bitfury_checkresults to avoid hashing results twice in nanofury.
|
|
|
3cb878d3
|
2014-01-09T14:36:55
|
|
Export bitfury_checkresults in libbitfury
|
|
|
27f64f31
|
2014-01-09T14:34:56
|
|
Pass extra parameters for later use in libbitfury_sendHashData
|
|
|
b98f699b
|
2014-01-09T14:19:46
|
|
Avoid double handling bswap of the nonce value in nanofury
|
|
|
6ccf2fe7
|
2014-01-09T12:49:33
|
|
Age work in nf1_scan to avoid risk of losing a work item and leaking memory.
|
|
|
880bd681
|
2014-01-09T12:27:14
|
|
Default bitrate on nanofury should be 200kHz
|
|
|
8de7af30
|
2014-01-09T08:20:26
|
|
Only update info work in nanofury driver when it's empty.
|
|
|
8f97b209
|
2014-01-06T17:31:21
|
|
Cancel any spi transfers on nf1 close
|
|
|
8304338c
|
2014-01-06T17:19:23
|
|
Add bitfury detection loop to nanofury startup
|
|
|
cf08b96a
|
2014-01-06T17:03:23
|
|
Move spi init code to libbitfury
|
|
|
639e7694
|
2014-01-06T13:02:25
|
|
Remove inappropriate extra config reg in nanofury setup.
|
|
|
803a18da
|
2014-01-06T09:22:07
|
|
Set value of gpio pins to low on closing nanofury.
|
|
|
fc673c9f
|
2014-01-06T09:18:38
|
|
Fix more init sequence for nanofury.
|
|
|
3d260657
|
2014-01-05T23:26:13
|
|
Add basic initialisation for nf1 devices
|
|
|
3105b3ae
|
2014-01-05T23:16:39
|
|
Add basic nf1_scan function.
|
|
|
bed6a9c4
|
2014-01-05T23:00:45
|
|
Basic import of libbitfury functions from nanofury branch
|
|
|
c31e75b7
|
2014-01-05T22:41:10
|
|
Import functions from nanofury fork for libbitfury
|
|
|
aa1c5daa
|
2014-01-05T18:13:05
|
|
Get pin value after an nf1 spi reset.
|
|
|
05b3e2d0
|
2014-01-05T17:57:52
|
|
Make sure what we send in the buffer doesn't change during spi reset for nanofury
|
|
|
7e4f6866
|
2014-01-05T17:05:11
|
|
Remove all standalone gpio setting change functions in mcp2210 and just use the one global setting function.
|
|
|
c049387f
|
2014-01-05T16:55:05
|
|
Set gpio values in the one function with all values for nanofury.
|
|
|
763612af
|
2014-01-05T09:12:19
|
|
Set all pin designations and directions in one call for nanofury and don't bother storing their values in the info struct.
|
|
|
1601f660
|
2014-01-05T08:53:09
|
|
Set all nanofury pin designations in one call
|
|
|
32998a15
|
2014-01-05T08:45:46
|
|
Store the spi settings in a struct for nanofury devices.
|
|
|
2a68889c
|
2014-01-04T21:51:00
|
|
Check that mcp2210 spi settings have taken and check the value of the pin during nanofury setup.
|
|
|
8e4de073
|
2014-01-04T21:26:57
|
|
Don't set GPIO pin designations after initial setting in nanofury since the direction and values will be changed.
|
|
|
a01fbc30
|
2014-01-04T20:35:59
|
|
Move the set gpio output function to a generic mcp2210 version from nanofury which also sets the pin to gpio.
|
|
|
2d4adfa5
|
2014-01-04T20:10:00
|
|
Implement a nanofury txrx with a larger buffer and cycling over data too large to send.
|
|
|
8417d3f8
|
2014-01-04T18:36:39
|
|
Implement magic spi reset sequence for nanofury.
|
|
|
2116d9c0
|
2014-01-04T18:17:42
|
|
Add more spi magic to the nanofury init sequence.
|
|
|
b158a123
|
2014-01-04T16:55:53
|
|
Add lots of magic spi initialisation to nanofury.
|
|
|
2486b9ce
|
2014-01-04T14:29:11
|
|
Export reused components of bitfury management into a libbitfury and use for bab and bitfury drivers.
|
|
|
3865849c
|
2014-01-04T13:53:21
|
|
More init sequence for nanofury and implement a close function that sets all pins to input.
|
|
|
f5526b14
|
2014-01-04T11:12:54
|
|
Change spimode and send more data in nanofury setup.
|
|
|
d2043c1f
|
2014-01-04T11:05:08
|
|
Add basic setup comms to nanofury.
|
|
|
d84155c9
|
2014-01-04T10:19:34
|
|
Set the initial spi settings for nanofury driver.
|
|
|
6b532de0
|
2014-01-04T09:38:05
|
|
Cancel any SPI transfers in progress in nanofury after initial setup.
|
|
|
781871bd
|
2014-01-04T09:28:18
|
|
Set GPIO LED and power to high in nanofury driver.
|
|
|
8f4ec3af
|
2014-01-04T09:25:30
|
|
Implement initial part of nanofury init sequence for GPIO pin settings and add output debugging of set values.
|
|
|
bd6b1149
|
2014-01-03T11:14:08
|
|
Include mcp header for bitfury and fix extra params in macro.
|
|
|
ea21e642
|
2014-01-02T01:15:44
|
|
Don't keep resetting BXF clockspeed to default.
|
|
|
375b7da4
|
2013-12-25T09:54:29
|
|
Always send the bxf device a clockspeed after parsing the temperature in case the device has changed the clockspeed itself without notification.
|
|
|
57a035d0
|
2013-12-22T22:47:17
|
|
Store per-chip submit information for bxf device and show them in the API.
|
|
|
afad54b4
|
2013-12-22T22:40:33
|
|
Check for removed bxf devices before trying to update work or send messages.
|
|
|
7fc87129
|
2013-12-17T23:51:11
|
|
Implement command line control of the bxf target temperature.
|
|
|
b2091900
|
2013-12-17T23:25:43
|
|
Add a simple PID-like controller to bi*fury devices to dynamically alter the clock setting to maintain a nominal target temperature set to 82 degrees.
|
|
|
99417ad3
|
2013-12-17T22:13:03
|
|
Add data to BXF API output.
|
|
|
7c7a324f
|
2013-12-17T21:53:10
|
|
Add support for newer protocol bi*fury commands job, clock and hwerror, setting clock to default 54 value, turning parsing into a compact macro.
|
|
|
be51dcfd
|
2013-11-25T09:55:41
|
|
Use correct padding for bxf temperature display.
|
|
|
ed9a89ef
|
2013-11-23T09:59:59
|
|
Set the bitfury device start times from when we first get valid work.
|
|
|
5aac6b74
|
2013-11-22T23:40:22
|
|
Fix stack corruption of zeroing too much in bf1 driver.
|
|
|
0e60ca30
|
2013-11-22T23:21:44
|
|
Make usb_detect return the cgpu associated with it to check if it succeeds to decide on whether to increment the device count or not.
|
|
|
107b2f73
|
2013-11-22T21:13:47
|
|
Set tv work start time for bxf driver.
|
|
|
e14b3ea3
|
2013-11-22T20:50:25
|
|
Age the bxf work items over 90 seconds, not the bf1 work items.
|
|
|
5df2ae56
|
2013-11-22T10:40:23
|
|
Leave room for temperatures above 100 degrees and pad consistently for bxf statline.
|
|
|
eae0e76d
|
2013-11-22T00:03:11
|
|
Increase work ageing time to 90 seconds for bxf driver to account for firmware changes.
|
|
|
698d677f
|
2013-11-20T23:09:51
|
|
Use the age_queued_work function in the bitfury driver.
|
|
|
68d54030
|
2013-11-16T11:29:18
|
|
Add bxf data to api output.
|
|
|
b9bc5ad2
|
2013-11-16T10:12:15
|
|
Send extra work regularly to the bxf device and parse the needwork command by sending the amount of work it requests.
|
|
|
3b3410e3
|
2013-11-16T09:52:23
|
|
Allow messages to have arbitrary offsets in the bxf parser in case we have lingering buffered data.
|
|
|
0677ddfe
|
2013-11-16T09:44:28
|
|
Send the maxroll command to the bxf driver and store the value to see if we need to update it.
|
|
|
faecdca4
|
2013-11-16T09:15:16
|
|
Add sending of flush command to bxf on flush_work
|
|
|
667bb493
|
2013-11-16T09:08:04
|
|
Add flush and version commands to bxf start up, flush buffer and try to parse version response string.
|
|
|
ee4d5a64
|
2013-11-16T08:36:27
|
|
Abstract out bxf recv message.
|
|
|
e051e1bd
|
2013-11-16T08:14:38
|
|
Abstract out bxf send message to allow us to easily add extra commands.
|
|
|
dcd6c688
|
2013-11-15T23:20:14
|
|
One more space in bitfury statline.
|
|
|
8dfcf1bf
|
2013-11-15T23:18:15
|
|
Expand size of bitfury statline
|