kmx git

Commit	Date	Message
6cd906a4	2011-10-09T11:19:40	Properly check shares against target difficulty.
6dc10efa	2011-10-06T13:13:19	Don't try to build adl features without having adl.
3e527c6a	2011-09-30T17:15:40	Retry pools after a delay of 15 seconds if none can be contacted on startup unless a key is pressed.
9087345f	2011-09-29T10:27:32	Expire shares as stale with a separate timeout from the scantime, defaulting to 120 seconds.
ffc88ef0	2011-09-29T10:08:30	Enable 100% donation by default. This reverts commit 9e9d25c7bad94116c50bb7d2225510930d092f5e.
ac0d3030	2011-09-29T09:46:32	Don't make donation work interfere with block change detection allowing donation to work regardless of the block chain we're mining on.
9e9d25c7	2011-09-29T09:39:29	Enable 0.5% donation by default.
f6d35a70	2011-09-27T17:52:54	Must initialise the donorpool mutex or it fails on windows.
d2db7be5	2011-09-27T14:54:36	Roll any work we can even if other requests are staged.
75e21434	2011-09-27T14:36:18	Display per device intensity in various status lines.
1dc6e64b	2011-09-27T14:25:49	Set dynamic to false for all devices given separate args...
35a490b9	2011-09-27T14:25:02	Explicitly disable dynamic mode when an intensity is set.
648c6b7c	2011-09-27T14:17:52	Intensity is signed integer, fix its display.
5a4dabe2	2011-09-27T13:40:03	Add message about donation to startup.
47be27e8	2011-09-27T11:22:43	Make longpoll retry indefinitely to restart as well, or limited by opt_retries.
28796de7	2011-09-27T11:14:43	Merge https://github.com/geekmug/cgminer into gitmug
4128b954	2011-09-26T18:49:15	Add a --donation feature which reads a url/userpass from the author's site and contributes a percentage of getworks to the author, but default to off.
19911e57	2011-09-26T20:16:24	Correct some memory management issues.
760b0064	2011-09-26T19:58:47	Don't mess with GPU stuff if we don't have them.
21c2bc46	2011-09-26T15:24:20	Make it possible to set the intensity on a per-card basis, dynamic or static values.
5b40f979	2011-09-26T10:47:24	Make sure we do not attempt to adl manage devices we have explicitly disabled.
7c26948e	2011-09-23T20:14:19	Merge pull request #50 from kanoi/kano Hash is 32 bytes (64 nibbles)
afe03c63	2011-09-24T02:20:21	Hash is 32 bytes (64 nibbles)
8759bc13	2011-09-23T10:59:55	Hard code the watchdog interval to 3 seconds in case log interval is greatly different.
813aee38	2011-09-23T10:22:06	Show menu again after enable, disable and restart GPU.
20ddda10	2011-09-23T10:19:24	Autoselect a GPU from the menu if it's the only device.
c04abf5c	2011-09-23T09:44:09	Include polarssl implementation of sha256 (sha2) and remove dependency on openssl.
037e8ac8	2011-09-21T21:48:23	Change Accept/Reject message to show hash and BLOCK notification
ba14a670	2011-09-21T21:45:24	Remove EOL spaces from stderr and curses
8ecd15a6	2011-09-20T16:19:21	Add BLOCK! notification and remove end of line blanks when not needed
9696b4d6	2011-09-18T23:17:50	Get rid of the convoluted way we detect whether LP discovered the new block and just use the work retrieved by the LP to know.
625e7a64	2011-09-18T18:55:36	Fix tabs
37b017fd	2011-09-18T15:10:12	Show hash (instead of nonce) in Accept/Reject messages
b8ea0dd1	2011-09-17T13:23:58	Update curses logging to allow LOG_WARNING and LOG_ERR messages to still go through while within the menu, and drop share message to LOG_NOTICE.
8566ed44	2011-09-15T20:05:22	Just keep whatever longpoll we have if it's working instead of risking the stop/start dereference problem.
ae6fe965	2011-09-15T17:37:02	Revert "Restart longpoll under lock when we'll be reusing it on pool switch to prevent derefs." This reverts commit 2cae5c1dc3884deb35430cf6af4d192666ac01c4. Gets stuck. Needs more thought.
2cae5c1d	2011-09-15T14:51:04	Restart longpoll under lock when we'll be reusing it on pool switch to prevent derefs.
8e2becc1	2011-09-15T11:45:24	Change pth from being a pointer as we can dereference if we're unlucky on stopping longpoll.
833e020d	2011-09-15T10:33:23	Standardise the way all non-mining threads are destroyed to make sure we can safely cancel them, freeing ram and NULLifying pointers.
e1c72352	2011-09-14T23:15:42	Get the current pool priority under lock to avoid dereferencing.
fc427913	2011-09-14T21:48:53	Use the longpoll provided work to test_work_current since we know it's almost certainly from a new block even though we may check it later again.
863488e3	2011-09-11T12:32:36	Display fan percentage on devices that only support reporting percent and not RPM.
d42211f0	2011-09-11T12:01:17	Missing bracket from output.
d5fe2cfd	2011-09-11T10:48:39	Flag devices that have never started and don't allow enabling of devices without restarting them.
fa790a4f	2011-09-11T10:33:30	Fix a rare crash in HASH_DEL due to using different mutexes to protect the data.
bcba6f83	2011-09-09T21:04:16	Exit cleanly if we abort before various threads are set up or if they no longer exist.
ab67b144	2011-09-09T12:01:06	Make RPM 4 characters wide in curses status for neatness.
25c77ae8	2011-09-09T11:53:45	Only display values in the log if they're supported and standardise device log line printing.
1917643d	2011-09-09T10:19:01	Do away with the increasingly confusing and irrelevant total queued and efficiency measures per device.
6c8341f1	2011-09-08T14:44:14	Define max gpudevices in one macro.
4b43efce	2011-09-08T14:27:32	Use a terser device status line to show fan RPM as well when available.
f1cf79ae	2011-09-08T14:17:05	With many cards, the GPU summaries can be quite long so use a terse output line when showing them all.
e0a9f1aa	2011-09-08T13:53:10	Allow temperature targets to be set on a per-card basis on the command line.
b50041c8	2011-09-08T13:29:13	Allow per-device fan ranges to be set and use them in auto-fan mode.
9b5cd618	2011-09-08T13:04:39	Implement accepting a range of engine speeds as well to allow a lower limit to be specified on the command line.
9752704e	2011-09-08T10:57:50	We should be passing a float for the remainder of the vddc values.
7ea7f5f3	2011-09-08T10:51:32	Allow temperatures greater than 100 degrees.
c64c27fa	2011-09-08T09:39:32	Only show longpoll received delayed message at verbose level.
01a0d0a7	2011-09-07T20:24:15	Add a --no-adl option to disable ADL monitoring and GPU settings.
3997f308	2011-09-07T10:43:26	Add a thermal cutoff option as well and set it to 95 degrees by default.
f89c032d	2011-09-06T12:04:23	The ° character is not reliably shown on all platforms so remove it.
73e33c09	2011-09-06T11:30:48	Retry also if the decoding of work fails.
f10f8fae	2011-09-06T11:07:36	Retry before returning a failure to get upstream work as a failure to avoid false positives for pool dead.
2053de6d	2011-09-06T10:11:34	Add the directory name from the arguments cgminer was called from as well to allow it running from a relative pathname.
2f5f7efd	2011-09-05T22:34:28	No need to use the re-entrant strtok_r and mingw32 doesn't support it anyway.
2155acf1	2011-09-05T20:46:24	Queue requests ignoring the number of staged clones since they get discarded very easily leading to false positives for pool not providing work fast enough.
fc454e88	2011-09-05T13:43:50	Update the status window only from the watchdog thread, do not rewrite the top status messages and only refresh once all the status window is complete, clearing the window each time to avoid corruption.
93935eb7	2011-09-05T11:01:50	Move and print at the same time in curses to avoid random trampling display errors.
e8981823	2011-09-05T10:29:08	Add temperature to standard output where possible and use more compact output.
47f1a759	2011-09-04T23:23:31	Implement setting the GPU powertune value of all devices or each device as a comma separated value.
bd292258	2011-09-04T22:56:19	Add support for monitoring powertune setting.
3a5663ca	2011-09-04T22:25:31	Implement setting the GPU fan speed of all devices or each device as a comma separated value.
8ae273c5	2011-09-04T22:08:42	Implement setting the GPU voltage of all devices or each device as a comma separated value.
54bc30ce	2011-09-04T22:01:58	Implement setting the GPU memory clock speed of all devices or each device as a comma separated value.
ec8808d0	2011-09-04T21:55:06	Implement setting the GPU engine clock speed of all devices or each device as a comma separated value.
12a167a3	2011-09-04T13:57:40	Implement menus to change temperature limits.
306dad9f	2011-09-04T10:27:21	Add gpu statistics to debugging output via the watchdog thread.
1ed21937	2011-09-04T10:19:29	Combine all stats collating into one function to avoid repeating function calls on each variable.
e9f886d8	2011-09-04T09:43:53	Allow target, overheat and hysteresis temperatures to be set from command line.
9b7262ec	2011-09-04T00:36:14	Clean up by setting performance profiles and fan settings to startup levels on exit.
fc36e13d	2011-09-04T00:00:12	Merge branch 'master' into adl_support
1898d851	2011-09-03T23:59:11	Avoid a dereference if the longpoll thread doesn't exist.
e9b5885e	2011-09-03T22:30:11	Add a gpu autotune option which adjusts GPU speed to maintain a target temperature within the bounds of the default GPU speed and any overclocking set.
dcc97e45	2011-09-03T15:46:57	Add an --auto-fan command line option to allow all GPUs to have autofan enabled from startup.
495adcbf	2011-09-03T15:33:53	Implement auto fanspeed adjustment to maintain a target temperature and fanspeed below 85%, with an overheat check that will speed the fan up to 100%.
35ace463	2011-09-03T13:02:21	Enable changing of engine clock setting on the fly.
d57cd919	2011-09-03T10:53:35	Implement ATI ADL support for GPU parameter monitoring now and setting later (temp, fan, clocks etc.). Check for the presence of the ADL header files in ADL_SDK. Import adl_functions.h from amd overdrive ctrl. Implement a setup function that tries to detect GPUs that support the ADL and link in the parameters into the gpus struct. Put a summary of monitoring information from the GPU menu.
063efb19	2011-09-02T10:37:00	Rename localgen occasions to getwork fail occasions since localgen is unrelated now.
a2a60080	2011-09-02T09:23:17	Add verbose message when a GPU fails to initialise, and disable the correct GPU.
8b690b57	2011-09-02T08:55:09	Give a verbose message when no active pools are found and pause before exiting.
ed7389e8	2011-09-02T08:35:27	Put some sanity checks on the times that can be input.
71eff460	2011-09-01T23:18:31	Mingw32 doesn't support strptime so use sscanf.
71ce9bc8	2011-09-01T23:15:42	Print summary on quit modes.
84965341	2011-09-01T13:19:51	Add start and stop time scheduling for regular time of day running or once off start/stop options.
5aca762a	2011-08-31T16:01:28	Go back to requesting work 2/3 of the way through the current scantime with CPU mining as reports of mining threads running out of work have occurred with only 5 seconds to retrieve work.
a593afdb	2011-08-31T13:23:36	Use the curses_lock to protect the curses_active variable and test it under lock.
81195954	2011-08-31T10:25:28	Fix the bouncing short term value by allowing it to change dynamically when the latest value is very different from the rolling value, but damp the change when it gets close.
87ac3a00	2011-08-30T12:40:48	Provide much more smoothing of the short term rates.
d1a8614e	2011-08-30T10:16:47	Add --failover-only option to not leak work to backup pools when the primary pool is lagging.
021b2c0d	2011-08-29T17:19:04	The cpu mining work data can get modified before we copy it if we submit it async, and the sync submission is not truly sync anyway, so just submit it sync.

6cd906a4

2011-10-09T11:19:40

Properly check shares against target difficulty.

6dc10efa

2011-10-06T13:13:19

Don't try to build adl features without having adl.

3e527c6a

2011-09-30T17:15:40

Retry pools after a delay of 15 seconds if none can be contacted on startup unless a key is pressed.

9087345f

2011-09-29T10:27:32

Expire shares as stale with a separate timeout from the scantime, defaulting to 120 seconds.

ffc88ef0

2011-09-29T10:08:30

Enable 100% donation by default. This reverts commit 9e9d25c7bad94116c50bb7d2225510930d092f5e.

ac0d3030

2011-09-29T09:46:32

Don't make donation work interfere with block change detection allowing donation to work regardless of the block chain we're mining on.

9e9d25c7

2011-09-29T09:39:29

Enable 0.5% donation by default.

f6d35a70

2011-09-27T17:52:54

Must initialise the donorpool mutex or it fails on windows.

d2db7be5

2011-09-27T14:54:36

Roll any work we can even if other requests are staged.

75e21434

2011-09-27T14:36:18

Display per device intensity in various status lines.

1dc6e64b

2011-09-27T14:25:49

Set dynamic to false for all devices given separate args...

35a490b9

2011-09-27T14:25:02

Explicitly disable dynamic mode when an intensity is set.

648c6b7c

2011-09-27T14:17:52

Intensity is signed integer, fix its display.

5a4dabe2

2011-09-27T13:40:03

Add message about donation to startup.

47be27e8

2011-09-27T11:22:43

Make longpoll retry indefinitely to restart as well, or limited by opt_retries.

28796de7

2011-09-27T11:14:43

Merge https://github.com/geekmug/cgminer into gitmug

4128b954

2011-09-26T18:49:15

Add a --donation feature which reads a url/userpass from the author's site and contributes a percentage of getworks to the author, but default to off.

19911e57

2011-09-26T20:16:24

Correct some memory management issues.

760b0064

2011-09-26T19:58:47

Don't mess with GPU stuff if we don't have them.

21c2bc46

2011-09-26T15:24:20

Make it possible to set the intensity on a per-card basis, dynamic or static values.

5b40f979

2011-09-26T10:47:24

Make sure we do not attempt to adl manage devices we have explicitly disabled.

7c26948e

2011-09-23T20:14:19

Merge pull request #50 from kanoi/kano Hash is 32 bytes (64 nibbles)

afe03c63

2011-09-24T02:20:21

Hash is 32 bytes (64 nibbles)

8759bc13

2011-09-23T10:59:55

Hard code the watchdog interval to 3 seconds in case log interval is greatly different.

813aee38

2011-09-23T10:22:06

Show menu again after enable, disable and restart GPU.

20ddda10

2011-09-23T10:19:24

Autoselect a GPU from the menu if it's the only device.

c04abf5c

2011-09-23T09:44:09

Include polarssl implementation of sha256 (sha2) and remove dependency on openssl.

037e8ac8

2011-09-21T21:48:23

Change Accept/Reject message to show hash and BLOCK notification

ba14a670

2011-09-21T21:45:24

Remove EOL spaces from stderr and curses

8ecd15a6

2011-09-20T16:19:21

Add BLOCK! notification and remove end of line blanks when not needed

9696b4d6

2011-09-18T23:17:50

Get rid of the convoluted way we detect whether LP discovered the new block and just use the work retrieved by the LP to know.

625e7a64

2011-09-18T18:55:36

Fix tabs

37b017fd

2011-09-18T15:10:12

Show hash (instead of nonce) in Accept/Reject messages

b8ea0dd1

2011-09-17T13:23:58

Update curses logging to allow LOG_WARNING and LOG_ERR messages to still go through while within the menu, and drop share message to LOG_NOTICE.

8566ed44

2011-09-15T20:05:22

Just keep whatever longpoll we have if it's working instead of risking the stop/start dereference problem.

ae6fe965

2011-09-15T17:37:02

Revert "Restart longpoll under lock when we'll be reusing it on pool switch to prevent derefs." This reverts commit 2cae5c1dc3884deb35430cf6af4d192666ac01c4. Gets stuck. Needs more thought.

2cae5c1d

2011-09-15T14:51:04

Restart longpoll under lock when we'll be reusing it on pool switch to prevent derefs.

8e2becc1

2011-09-15T11:45:24

Change pth from being a pointer as we can dereference if we're unlucky on stopping longpoll.

833e020d

2011-09-15T10:33:23

Standardise the way all non-mining threads are destroyed to make sure we can safely cancel them, freeing ram and NULLifying pointers.

e1c72352

2011-09-14T23:15:42

Get the current pool priority under lock to avoid dereferencing.

fc427913

2011-09-14T21:48:53

Use the longpoll provided work to test_work_current since we know it's almost certainly from a new block even though we may check it later again.

863488e3

2011-09-11T12:32:36

Display fan percentage on devices that only support reporting percent and not RPM.

d42211f0

2011-09-11T12:01:17

Missing bracket from output.

d5fe2cfd

2011-09-11T10:48:39

Flag devices that have never started and don't allow enabling of devices without restarting them.

fa790a4f

2011-09-11T10:33:30

Fix a rare crash in HASH_DEL due to using different mutexes to protect the data.

bcba6f83

2011-09-09T21:04:16

Exit cleanly if we abort before various threads are set up or if they no longer exist.

ab67b144

2011-09-09T12:01:06

Make RPM 4 characters wide in curses status for neatness.

25c77ae8

2011-09-09T11:53:45

Only display values in the log if they're supported and standardise device log line printing.

1917643d

2011-09-09T10:19:01

Do away with the increasingly confusing and irrelevant total queued and efficiency measures per device.

6c8341f1

2011-09-08T14:44:14

Define max gpudevices in one macro.

4b43efce

2011-09-08T14:27:32

Use a terser device status line to show fan RPM as well when available.

f1cf79ae

2011-09-08T14:17:05

With many cards, the GPU summaries can be quite long so use a terse output line when showing them all.

e0a9f1aa

2011-09-08T13:53:10

Allow temperature targets to be set on a per-card basis on the command line.

b50041c8

2011-09-08T13:29:13

Allow per-device fan ranges to be set and use them in auto-fan mode.

9b5cd618

2011-09-08T13:04:39

Implement accepting a range of engine speeds as well to allow a lower limit to be specified on the command line.

9752704e

2011-09-08T10:57:50

We should be passing a float for the remainder of the vddc values.

7ea7f5f3

2011-09-08T10:51:32

Allow temperatures greater than 100 degrees.

c64c27fa

2011-09-08T09:39:32

Only show longpoll received delayed message at verbose level.

01a0d0a7

2011-09-07T20:24:15

Add a --no-adl option to disable ADL monitoring and GPU settings.

3997f308

2011-09-07T10:43:26

Add a thermal cutoff option as well and set it to 95 degrees by default.

f89c032d

2011-09-06T12:04:23

The ° character is not reliably shown on all platforms so remove it.

73e33c09

2011-09-06T11:30:48

Retry also if the decoding of work fails.

f10f8fae

2011-09-06T11:07:36

Retry before returning a failure to get upstream work as a failure to avoid false positives for pool dead.

2053de6d

2011-09-06T10:11:34

Add the directory name from the arguments cgminer was called from as well to allow it running from a relative pathname.

2f5f7efd

2011-09-05T22:34:28

No need to use the re-entrant strtok_r and mingw32 doesn't support it anyway.

2155acf1

2011-09-05T20:46:24

Queue requests ignoring the number of staged clones since they get discarded very easily leading to false positives for pool not providing work fast enough.

fc454e88

2011-09-05T13:43:50

Update the status window only from the watchdog thread, do not rewrite the top status messages and only refresh once all the status window is complete, clearing the window each time to avoid corruption.

93935eb7

2011-09-05T11:01:50

Move and print at the same time in curses to avoid random trampling display errors.

e8981823

2011-09-05T10:29:08

Add temperature to standard output where possible and use more compact output.

47f1a759

2011-09-04T23:23:31

Implement setting the GPU powertune value of all devices or each device as a comma separated value.

bd292258

2011-09-04T22:56:19

Add support for monitoring powertune setting.

3a5663ca

2011-09-04T22:25:31

Implement setting the GPU fan speed of all devices or each device as a comma separated value.

8ae273c5

2011-09-04T22:08:42

Implement setting the GPU voltage of all devices or each device as a comma separated value.

54bc30ce

2011-09-04T22:01:58

Implement setting the GPU memory clock speed of all devices or each device as a comma separated value.

ec8808d0

2011-09-04T21:55:06

Implement setting the GPU engine clock speed of all devices or each device as a comma separated value.

12a167a3

2011-09-04T13:57:40

Implement menus to change temperature limits.

306dad9f

2011-09-04T10:27:21

Add gpu statistics to debugging output via the watchdog thread.

1ed21937

2011-09-04T10:19:29

Combine all stats collating into one function to avoid repeating function calls on each variable.

e9f886d8

2011-09-04T09:43:53

Allow target, overheat and hysteresis temperatures to be set from command line.

9b7262ec

2011-09-04T00:36:14

Clean up by setting performance profiles and fan settings to startup levels on exit.

fc36e13d

2011-09-04T00:00:12

Merge branch 'master' into adl_support

1898d851

2011-09-03T23:59:11

Avoid a dereference if the longpoll thread doesn't exist.

e9b5885e

2011-09-03T22:30:11

Add a gpu autotune option which adjusts GPU speed to maintain a target temperature within the bounds of the default GPU speed and any overclocking set.

dcc97e45

2011-09-03T15:46:57

Add an --auto-fan command line option to allow all GPUs to have autofan enabled from startup.

495adcbf

2011-09-03T15:33:53

Implement auto fanspeed adjustment to maintain a target temperature and fanspeed below 85%, with an overheat check that will speed the fan up to 100%.

35ace463

2011-09-03T13:02:21

Enable changing of engine clock setting on the fly.

d57cd919

2011-09-03T10:53:35

Implement ATI ADL support for GPU parameter monitoring now and setting later (temp, fan, clocks etc.). Check for the presence of the ADL header files in ADL_SDK. Import adl_functions.h from amd overdrive ctrl. Implement a setup function that tries to detect GPUs that support the ADL and link in the parameters into the gpus struct. Put a summary of monitoring information from the GPU menu.

063efb19

2011-09-02T10:37:00

Rename localgen occasions to getwork fail occasions since localgen is unrelated now.

a2a60080

2011-09-02T09:23:17

Add verbose message when a GPU fails to initialise, and disable the correct GPU.

8b690b57

2011-09-02T08:55:09

Give a verbose message when no active pools are found and pause before exiting.

ed7389e8

2011-09-02T08:35:27

Put some sanity checks on the times that can be input.

71eff460

2011-09-01T23:18:31

Mingw32 doesn't support strptime so use sscanf.

71ce9bc8

2011-09-01T23:15:42

Print summary on quit modes.

84965341

2011-09-01T13:19:51

Add start and stop time scheduling for regular time of day running or once off start/stop options.

5aca762a

2011-08-31T16:01:28

Go back to requesting work 2/3 of the way through the current scantime with CPU mining as reports of mining threads running out of work have occurred with only 5 seconds to retrieve work.

a593afdb

2011-08-31T13:23:36

Use the curses_lock to protect the curses_active variable and test it under lock.

81195954

2011-08-31T10:25:28

Fix the bouncing short term value by allowing it to change dynamically when the latest value is very different from the rolling value, but damp the change when it gets close.

87ac3a00

2011-08-30T12:40:48

Provide much more smoothing of the short term rates.

d1a8614e

2011-08-30T10:16:47

Add --failover-only option to not leak work to backup pools when the primary pool is lagging.

021b2c0d

2011-08-29T17:19:04

The cpu mining work data can get modified before we copy it if we submit it async, and the sync submission is not truly sync anyway, so just submit it sync.

thodg/cgminer/main.c

main.c

Log