|
b535bc08
|
2014-01-26T22:23:31
|
|
Set info work to null after it is freed in nf1 after a restart to prevent double free later.
|
|
|
8d7d764f
|
2014-01-23T23:19:19
|
|
Change the default clockspeed bits on nanofury devices to 50 and add a command line option to allow it to be changed.
|
|
|
22a855c1
|
2014-01-09T16:06:46
|
|
Set the mcp2210 transfer setting only when it changes.
|
|
|
a7f89391
|
2014-01-09T15:49:12
|
|
Only perform spi reset on init, not with each transaction.
|
|
|
8c603e47
|
2014-01-09T15:33:24
|
|
Remove spi_detect_bitfury at nanofury startup and fix incorrect refresh time.
|
|
|
e8aca49b
|
2014-01-09T15:26:34
|
|
Use a simple serialised work model for nanofury
|
|
|
e97aa32c
|
2014-01-09T15:20:40
|
|
Use bitfury_checkresults to avoid hashing results twice in nanofury.
|
|
|
3cb878d3
|
2014-01-09T14:36:55
|
|
Export bitfury_checkresults in libbitfury
|
|
|
27f64f31
|
2014-01-09T14:34:56
|
|
Pass extra parameters for later use in libbitfury_sendHashData
|
|
|
b98f699b
|
2014-01-09T14:19:46
|
|
Avoid double handling bswap of the nonce value in nanofury
|
|
|
6ccf2fe7
|
2014-01-09T12:49:33
|
|
Age work in nf1_scan to avoid risk of losing a work item and leaking memory.
|
|
|
880bd681
|
2014-01-09T12:27:14
|
|
Default bitrate on nanofury should be 200kHz
|
|
|
8de7af30
|
2014-01-09T08:20:26
|
|
Only update info work in nanofury driver when it's empty.
|
|
|
8f97b209
|
2014-01-06T17:31:21
|
|
Cancel any spi transfers on nf1 close
|
|
|
8304338c
|
2014-01-06T17:19:23
|
|
Add bitfury detection loop to nanofury startup
|
|
|
cf08b96a
|
2014-01-06T17:03:23
|
|
Move spi init code to libbitfury
|
|
|
639e7694
|
2014-01-06T13:02:25
|
|
Remove inappropriate extra config reg in nanofury setup.
|
|
|
803a18da
|
2014-01-06T09:22:07
|
|
Set value of gpio pins to low on closing nanofury.
|
|
|
fc673c9f
|
2014-01-06T09:18:38
|
|
Fix more init sequence for nanofury.
|
|
|
3d260657
|
2014-01-05T23:26:13
|
|
Add basic initialisation for nf1 devices
|
|
|
3105b3ae
|
2014-01-05T23:16:39
|
|
Add basic nf1_scan function.
|
|
|
bed6a9c4
|
2014-01-05T23:00:45
|
|
Basic import of libbitfury functions from nanofury branch
|
|
|
c31e75b7
|
2014-01-05T22:41:10
|
|
Import functions from nanofury fork for libbitfury
|
|
|
aa1c5daa
|
2014-01-05T18:13:05
|
|
Get pin value after an nf1 spi reset.
|
|
|
05b3e2d0
|
2014-01-05T17:57:52
|
|
Make sure what we send in the buffer doesn't change during spi reset for nanofury
|
|
|
7e4f6866
|
2014-01-05T17:05:11
|
|
Remove all standalone gpio setting change functions in mcp2210 and just use the one global setting function.
|
|
|
c049387f
|
2014-01-05T16:55:05
|
|
Set gpio values in the one function with all values for nanofury.
|
|
|
763612af
|
2014-01-05T09:12:19
|
|
Set all pin designations and directions in one call for nanofury and don't bother storing their values in the info struct.
|
|
|
1601f660
|
2014-01-05T08:53:09
|
|
Set all nanofury pin designations in one call
|
|
|
32998a15
|
2014-01-05T08:45:46
|
|
Store the spi settings in a struct for nanofury devices.
|
|
|
2a68889c
|
2014-01-04T21:51:00
|
|
Check that mcp2210 spi settings have taken and check the value of the pin during nanofury setup.
|
|
|
8e4de073
|
2014-01-04T21:26:57
|
|
Don't set GPIO pin designations after initial setting in nanofury since the direction and values will be changed.
|
|
|
a01fbc30
|
2014-01-04T20:35:59
|
|
Move the set gpio output function to a generic mcp2210 version from nanofury which also sets the pin to gpio.
|
|
|
2d4adfa5
|
2014-01-04T20:10:00
|
|
Implement a nanofury txrx with a larger buffer and cycling over data too large to send.
|
|
|
8417d3f8
|
2014-01-04T18:36:39
|
|
Implement magic spi reset sequence for nanofury.
|
|
|
2116d9c0
|
2014-01-04T18:17:42
|
|
Add more spi magic to the nanofury init sequence.
|
|
|
b158a123
|
2014-01-04T16:55:53
|
|
Add lots of magic spi initialisation to nanofury.
|
|
|
2486b9ce
|
2014-01-04T14:29:11
|
|
Export reused components of bitfury management into a libbitfury and use for bab and bitfury drivers.
|
|
|
3865849c
|
2014-01-04T13:53:21
|
|
More init sequence for nanofury and implement a close function that sets all pins to input.
|
|
|
f5526b14
|
2014-01-04T11:12:54
|
|
Change spimode and send more data in nanofury setup.
|
|
|
d2043c1f
|
2014-01-04T11:05:08
|
|
Add basic setup comms to nanofury.
|
|
|
d84155c9
|
2014-01-04T10:19:34
|
|
Set the initial spi settings for nanofury driver.
|
|
|
6b532de0
|
2014-01-04T09:38:05
|
|
Cancel any SPI transfers in progress in nanofury after initial setup.
|
|
|
781871bd
|
2014-01-04T09:28:18
|
|
Set GPIO LED and power to high in nanofury driver.
|
|
|
8f4ec3af
|
2014-01-04T09:25:30
|
|
Implement initial part of nanofury init sequence for GPIO pin settings and add output debugging of set values.
|
|
|
bd6b1149
|
2014-01-03T11:14:08
|
|
Include mcp header for bitfury and fix extra params in macro.
|
|
|
ea21e642
|
2014-01-02T01:15:44
|
|
Don't keep resetting BXF clockspeed to default.
|
|
|
375b7da4
|
2013-12-25T09:54:29
|
|
Always send the bxf device a clockspeed after parsing the temperature in case the device has changed the clockspeed itself without notification.
|
|
|
57a035d0
|
2013-12-22T22:47:17
|
|
Store per-chip submit information for bxf device and show them in the API.
|
|
|
afad54b4
|
2013-12-22T22:40:33
|
|
Check for removed bxf devices before trying to update work or send messages.
|
|
|
7fc87129
|
2013-12-17T23:51:11
|
|
Implement command line control of the bxf target temperature.
|
|
|
b2091900
|
2013-12-17T23:25:43
|
|
Add a simple PID-like controller to bi*fury devices to dynamically alter the clock setting to maintain a nominal target temperature set to 82 degrees.
|
|
|
99417ad3
|
2013-12-17T22:13:03
|
|
Add data to BXF API output.
|
|
|
7c7a324f
|
2013-12-17T21:53:10
|
|
Add support for newer protocol bi*fury commands job, clock and hwerror, setting clock to default 54 value, turning parsing into a compact macro.
|
|
|
be51dcfd
|
2013-11-25T09:55:41
|
|
Use correct padding for bxf temperature display.
|
|
|
ed9a89ef
|
2013-11-23T09:59:59
|
|
Set the bitfury device start times from when we first get valid work.
|
|
|
5aac6b74
|
2013-11-22T23:40:22
|
|
Fix stack corruption of zeroing too much in bf1 driver.
|
|
|
0e60ca30
|
2013-11-22T23:21:44
|
|
Make usb_detect return the cgpu associated with it to check if it succeeds to decide on whether to increment the device count or not.
|
|
|
107b2f73
|
2013-11-22T21:13:47
|
|
Set tv work start time for bxf driver.
|
|
|
e14b3ea3
|
2013-11-22T20:50:25
|
|
Age the bxf work items over 90 seconds, not the bf1 work items.
|
|
|
5df2ae56
|
2013-11-22T10:40:23
|
|
Leave room for temperatures above 100 degrees and pad consistently for bxf statline.
|
|
|
eae0e76d
|
2013-11-22T00:03:11
|
|
Increase work ageing time to 90 seconds for bxf driver to account for firmware changes.
|
|
|
698d677f
|
2013-11-20T23:09:51
|
|
Use the age_queued_work function in the bitfury driver.
|
|
|
68d54030
|
2013-11-16T11:29:18
|
|
Add bxf data to api output.
|
|
|
b9bc5ad2
|
2013-11-16T10:12:15
|
|
Send extra work regularly to the bxf device and parse the needwork command by sending the amount of work it requests.
|
|
|
3b3410e3
|
2013-11-16T09:52:23
|
|
Allow messages to have arbitrary offsets in the bxf parser in case we have lingering buffered data.
|
|
|
0677ddfe
|
2013-11-16T09:44:28
|
|
Send the maxroll command to the bxf driver and store the value to see if we need to update it.
|
|
|
faecdca4
|
2013-11-16T09:15:16
|
|
Add sending of flush command to bxf on flush_work
|
|
|
667bb493
|
2013-11-16T09:08:04
|
|
Add flush and version commands to bxf start up, flush buffer and try to parse version response string.
|
|
|
ee4d5a64
|
2013-11-16T08:36:27
|
|
Abstract out bxf recv message.
|
|
|
e051e1bd
|
2013-11-16T08:14:38
|
|
Abstract out bxf send message to allow us to easily add extra commands.
|
|
|
dcd6c688
|
2013-11-15T23:20:14
|
|
One more space in bitfury statline.
|
|
|
8dfcf1bf
|
2013-11-15T23:18:15
|
|
Expand size of bitfury statline
|
|
|
12a2ded6
|
2013-11-15T22:57:41
|
|
Various driver fixes for bitfury devices, including a flag from when first valid work appears.
|
|
|
a51bde3e
|
2013-11-15T22:35:10
|
|
Look up work results in bxf driver from correct variable.
|
|
|
0508610f
|
2013-11-15T17:43:51
|
|
Correct incorrect error code in bxf driver for usb writes and add debugging.
|
|
|
3aac6ebd
|
2013-11-14T15:50:56
|
|
Implement a statline showing temperature for bxf
|
|
|
5253eb7e
|
2013-11-14T15:44:21
|
|
Add api data for bxf device, sharing the hashrate function with bf1.
|
|
|
25dd5fb0
|
2013-11-14T15:32:49
|
|
Count no matching work as a hw error on bxf
|
|
|
770cd8e6
|
2013-11-14T14:13:07
|
|
Work id should be hexadecimal in bxf messages.
|
|
|
e29e84ae
|
2013-11-14T14:04:54
|
|
Add unrecognised string debugging to bxf driver.
|
|
|
b679337c
|
2013-11-14T13:57:09
|
|
Implement the main scanloop for bxf, trying to prevent it from ntime rolling work if the work protocol does not allow it.
|
|
|
8a710a68
|
2013-11-14T13:21:58
|
|
Parse bxf work submits fully, submitting the results.
|
|
|
6f8fbd39
|
2013-11-14T13:01:54
|
|
Implement a skeleton parse bxf submit function.
|
|
|
5e147c69
|
2013-11-14T12:49:59
|
|
Use the bxf read thread to set the device target and send its first work item.
|
|
|
418664ad
|
2013-11-14T12:39:15
|
|
Implement a bxf send work function and set update and restart functions to sending new work since that's the equivalent for that device.
|
|
|
977943b3
|
2013-11-14T12:08:48
|
|
Add temperature parsing to bxf driver
|
|
|
c1c834a6
|
2013-11-14T11:58:21
|
|
Create and destroy a basic bxf read thread.
|
|
|
18d1a9d7
|
2013-11-14T11:35:47
|
|
Remove the buffer from bitfury info since it is only used on one pass in the bf1 device.
|
|
|
28d93514
|
2013-11-14T11:33:15
|
|
Add a rudimentary bxf detect one function.
|
|
|
174b9fd6
|
2013-11-14T11:27:43
|
|
Rename all bf1 specific functions in the bitfury driver, using a switch to choose correct function.
|
|
|
c2275a81
|
2013-11-14T11:15:18
|
|
Rename bitfury_getinfo to bf1_getinfo since it's unique to bf1 devices.
|
|
|
1d0d9fba
|
2013-11-14T11:11:01
|
|
Separate out the bf1 reset from bitfury reset.
|
|
|
e7758fcd
|
2013-11-14T11:05:24
|
|
Store the bitfury identity in the info struct.
|
|
|
67c3826b
|
2013-11-14T10:37:23
|
|
Uniquely identify the BF1 and BXF bitfury devices.
|
|
|
0b64d438
|
2013-11-10T18:13:26
|
|
Fine tune the reading of results in bitfury driver to not lose any across work restarts or corrupt due to store results not parsed during restart.
|
|
|
be8b4f97
|
2013-11-09T17:25:18
|
|
Use the main hashlist to store work done in the bitfury driver and remove work from the list by time, thereby fixing the duplicates at startup. Count hardware errors for when no match occurs.
|
|
|
8fb7a0d1
|
2013-11-04T08:45:09
|
|
Always use a usb read buffer instead of having to explicitly enable it.
|
|
|
f29f6121
|
2013-10-25T14:35:56
|
|
Merge branch 'master' into hashfast
|
|
|
eb5b6114
|
2013-10-24T22:26:48
|
|
Use cancellable transfers on bitfury device.
|