kmx git

Commit	Date	Message
bbb213c1	2017-11-11T13:19:24	cmake: let USE_ICONV be optional on macOS Instead of forcing iconv support on macOS (by forcing `USE_ICONV` on), honor the `USE_ICONV` option only on macOS. Although macOS includes iconv by default, some macOS users may have a deficient installation for some reason and they should be provided a workaround to use libgit2 even in this situation. iconv support is now disabled entirely on non-macOS platforms. No other platform supports core.precomposeunicode, and iconv should never be linked.
a0b0b808	2017-11-11T14:03:14	cmake: Allow user to select bundled zlib Under some circumstances the installed / system version of zlib may not be desirable due to being too old or buggy. This patch adds the option `USE_BUNDLED_ZLIB` that will cause the bundled version of zlib to be used. We may also want to add similar functionality to allow the user to select other bundled 3rd-party dependencies instead of using the system versions. /cc @pks-t @ethomson
c9bb68c2	2017-09-07T00:41:54	cmake: move Darwin-specific block around This allows us to only link against CoreFoundation when using the SecureTransport backend
9980be03	2017-09-06T22:13:58	cmake: Add USE_HTTPS as a CMake option It defaults to ON, e.g. "pick whatever default is appropriate for the platform". It accepts one of SecureTransport, OpenSSL, WinHTTP, or OFF. It errors if the backend library couldn't be found.
10b25dbf	2017-08-10T00:03:30	cmake: braces are not needed here
fdd06874	2017-08-09T21:35:53	cmake: use FeatureSummary to display which features we end up using
4da74c83	2017-10-20T07:29:17	cmake: use project-relative binary and source directories Due to our split of CMake files into multiple modules, we had to replace some uses of the `${CMAKE_CURRENT_SOURCE_DIR}` and `${CMAKE_CURRENT_BINARY_DIR}` variables and replace them with `${CMAKE_SOURCE_DIR}` and `${CMAKE_BINARY_DIR}`. This enabled us to still be able to refer to top-level files when defining build instructions inside of a subdirectory. When replacing all variables, it was assumed that the absolute set of variables is always relative to the current project. But in fact, this is not the case, as these variables always point to the source and binary directory as given by the top-levl project. So the change actually broke the ability to include libgit2 directly as a subproject, as source files cannot be found anymore. Fix this by instead using project-specific source and binary directories with `${libgit2_SOURCE_DIR}` and `${libgit2_BINARY_DIR}`.
8bbee8f3	2017-10-14T08:36:54	Fix compilation for CMake versions 3.0.x where x >= 1 Apparently policy CMP0015 was added in CMake 3.1. With CMake 3.0.2, the build was failing with CMake Error at CMakeLists.txt:18 (CMAKE_POLICY): Policy "CMP0051" is not known to this version of CMake. This patch makes it work.
8ac8c78c	2017-10-09T15:15:08	Merge pull request #4356 from pks-t/pks/static-clar cmake: use static dependencies when building static libgit2
49551254	2017-09-22T09:34:37	cmake: use static dependencies when building static libgit2 CMake allows us to build a static library by simply setting the variable `BUILD_SHARED_LIBS` to `OFF`. While this causes us to create a static libgit2.a archive, it will not automatically cause CMake to only locate static archives when searching for dependencies. This does no harm in case of building our libgit2.a, as we do not want to include all required dependencies in the resulting archive anyway. Instead, we ask users of a static libgit2.a to link against the required set of static archives themselves, typically aided by the libgit2.pc file. Where it does cause harm, though, is when we build the libgit2_clar test suite. CMake has happily populated our LIBGIT2_LIBS variable with shared libraries, and so linking the final libgit2_clar test does not do the right thing. It will simply ignore those shared libraries, we end up with a test suite with undefined symbols. To fix the issue, we can instruct CMake to only locate libraries with a certain suffix. As static libraries are typically identifiable by their ".a" suffix on Unix-based systems, we can instruct CMake to only locate libraries with this suffix to restrict it from finding any shared libraries. This fixes building a static libgit2_clar test suite. Note that this ignores the problem on Windows. The problem here is that we cannot even distinguish static and dynamic libraries by only inspecting their suffix. So we just ignore the problem on Windows, for now.
cf9f3452	2017-09-06T07:38:32	cmake: bump minimum version to 2.8.11 Our current minimum CMake version is 2.8. This version does not yet allow us to use object libraries (introduced in 2.8.8) and target include directories (introduced in 2.8.12), which are both mechanisms we want to use to fix some specific problems. We previously were not able to bump our CMake version to a version supporting object libraries because Ubuntu Precise only had CMake version 2.8.7 in its repositories. But due to Precise being end of life now, we shouldn't need to honor it anymore. A current survey of some of the more conservative distributions brings up the following versions of CMake: - CentOS 5: 2.6.2 - CentOS 6: 2.8.12.2 - Debian 7: 2.8.11 - Fedora 23: 3.3.2 - OpenSUSE 13.2: 3.0.2 - Ubuntu Precise: 2.8.7 - Ubuntu Trusty: 2.8.12 The only two outliers here are CentOS 5 and Ubuntu Precise. CentOS is currently unsupported due to our minimum version being 2.8 and Ubuntu Precise is not maintained anymore. So the next smallest version supported by all major distributions is 2.8.11. While this does not yet support target include directories, it at least enables us to use object libraries. So this becomes our new minimum required version.
524c1d3c	2017-09-20T07:48:19	Merge pull request #4334 from pks-t/pks/reproducible-builds Reproducible builds
54214d61	2017-09-15T10:28:32	cmake: fix linker error with dbghelper library When the MSVC_CRTDBG option is set by the developer, we will link in the dbghelper library to enable memory lead detection in MSVC projects. We are doing so by adding it to the variable `CMAKE_C_STANDARD_LIBRARIES`, so that it is linked for every library and executable built by CMake. But this causes our builds to fail with a linker error: ``` LINK: fatal error LNK1104: cannot open file 'advapi32.lib;Dbghelp.lib' ``` The issue here is that we are treating the variable as if it were an array of libraries by setting it via the following command: ``` SET(CMAKE_C_STANDARD_LIBRARIES "${CMAKE_C_STANDARD_LIBRARIES}" "Dbghelp.lib") ``` The generated build commands will then simply stringify the variable, concatenating all the contained libraries with a ";". This causes the observed linking failure. To fix the issue, we should just treat the variabable as a simple string. So instead of adding multiple members, we just add the "Dbghelp.lib" library to the existing string, separated by a space character.
d630887b	2017-08-30T21:47:12	cmake: enable reproducible static linking By default, both ar(1) and ranlib(1) will insert additional information like timestamps into generated static archives and indices. As a consequence, generated static archives are not deterministic when created with default parameters. Both programs do support a deterministic mode, which will simply zero out undeterministic information with `ar D` and `ranlib -D`. Unfortunately, CMake does not provide an easy knob to add these command line parameters. Instead, we have to redefine the complete command definitons stored in the variables CMAKE_C_ARCHIVE_CREATE, CMAKE_C_ARCHIVE_APPEND and CMAKE_C_ARCHIVE_FINISH. Introduce a new build option `ENABLE_REPRODUCIBLE_BUILDS`. This option is available on Unix-like systems with the exception of macOS, which does not have support for the required flags. If the option is being enabled, we add those flags to the invocation of both `ar` and `ranlib` to enable deterministically building the static archive.
175ab8e7	2017-08-25T17:36:24	cmake: add switch to build with -Werror Add a simple switch to enable building with "-Werror=<warning>" instead of "-W<warning". Due to the encapsulated `ENABLE_WARNINGS` macro, this is as simple as adding a new variable "ENABLE_WERROR`, which can be passed on the command line via `-DENABLE_WERROR=ON`. The variable defaults to NO to not bother developers in their day to day work.
4a46a8c1	2017-08-25T17:32:54	cmake: encapsulate enabling/disabling compiler warnings There are multiple sites where we enable or disable compiler warning via "-W<warning>" or "-Wno-<warning>". As we want to extend this mechanism later on to conditionally switch these over to "-Werror=<warning>", we encapsulate the logic into its their own macros `ENABLE_WARNINGS` and `DISABLE_WARNINGS`. Note that we in fact have to use a macro here. Using a function would not modify the CFLAGS inside of the callers scope, but in the function's scope only.
e5c9723d	2017-06-30T18:12:02	cmake: move library build instructions into subdirectory To fix leaking build instructions into different targets and to make the build instructions easier to handle, create a new CMakeLists.txt file containing build instructions for the libgit2 target. By now, the split is rather easy to achieve. Due to the preparatory steps, we can now simply move over all related build instructions, only needing to remove the "src/" prefix from some files.
72f27cb6	2017-06-30T17:02:00	cmake: fix up source and binary directory paths There are quite some uses of the variables "${CMAKE_CURRENT_SOURCE_DIR}" and "${CMAKE_CURRENT_BINARY_DIR}" where they are not appropriate. Convert these sites to instead use the variables "${CMAKE_SOURCE_DIR}" and "${CMAKE_BINARY_DIR}", which instead point to the project's root directory. This will ease splitting up the library build instructions into its own subdirectory.
1f43a43d	2017-06-28T13:28:33	cmake: move zlib build instructions into subdirectory Extract code required to build the zlib library into its own CMakeLists.txt, which is included as required.
b7514554	2017-06-28T13:25:09	cmake: move http-parser build instructions into subdirectory Extract code required to build the http-parser library into its own CMakeLists.txt, which is included as required.
9e449e52	2017-06-28T13:23:45	cmake: move regex build instructions into subdirectory Extract code required to build the regex library into its own CMakeLists.txt, which is included as required.
43248500	2017-06-28T13:21:09	cmake: move winhttp build instructions into subdirectory Extract code required to build the winhttp library into its own CMakeLists.txt, which is included as required.
bed7ca3a	2017-06-30T16:57:16	cmake: define WIN_RC with other platform sources This makes splitting up the library build instructions later on more obvious and easier to achieve.
8ee90c39	2017-06-28T13:16:38	cmake: find dependencies after setting build flags This makes splitting up the library build instructions later on more obvious and easier to achieve.
c3635130	2017-06-28T13:14:23	cmake: move definition of Win32 flags together This makes splitting up the library build instructions later on more obvious and easier to achieve.
32a2e500	2017-07-01T13:41:36	cmake: inline TARGET_OS_LIBRARIES function Previous to keeping track of libraries and linking directories via variables, we had two call sites of the `TARGET_OS_LIBRARIES` function to avoid duplicating knowledge on required operating system library dependencies. But as the libgit2_clar target now re-uses defined variables to link against these libraries, we can simply inline the function.
8e31cc25	2017-06-28T12:51:14	cmake: keep track of libraries and includes via lists Later on, we will move detection of required libraries, library directories as well as include directories into a separate CMakeLists.txt file inside of the source directory. Obviously, we want to avoid duplication here regarding these parameters. To prepare for the split, put the parameters into three variables LIBGIT2_LIBS, LIBGIT2_LIBDIRS and LIBGIT2_INCLUDES, tracking the required libraries, linking directory as well as include directories. These variables can later be exported into the parent scope from inside of the source build instructions, making them readily available for the other subdirectories.
dd332e2a	2017-06-23T20:42:41	cmake: use absolute path to deps When refering to files and directories inside of the top-level "deps/" directory, we're being inconsistent in using relative or absolute paths. To enable splitting out parts of the top-level CMakeLists.txt into an own file in the "src/" directory, consistently switch over to use absolute paths to avoid errors when converting.
8341d6cf	2017-07-04T10:57:28	cmake: move regcomp and futimens checks to "features.h" In our CMakeLists.txt, we have to check multiple functions in order to determine if we have to use our own or whether we can use the platform-provided one. For two of these functions, namely `regcomp_l()` and `futimens`, the defined macro is actually used inside of the header file "src/unix/posix.h". As such, these macros are not only required by the library, but also by our test suite, which is makes use of internal headers. To prepare for the CMakeLists.txt split, move these two defines inside of the "features.h" header.
a390a846	2017-07-01T13:06:00	cmake: move defines into "features.h" header In a future commit, we will split out the build instructions for our library directory and move them into a subdirectory. One of the benefits is fixing scoping issues, where e.g. defines do not leak to build targets where they do not belong to. But unfortunately, this does also pose the problem of how to propagate some defines which are required by both the library and the test suite. One way would be to create another variable keeping track of all added defines and declare it inside of the parent scope. While this is the most obvious and simplest way of going ahead, it is kind of unfortunate. The main reason to not use this is that these defines become implicit dependencies between the build targets. By simply observing a define inside of the CMakeLists.txt file, one cannot reason whether this define is only required by the current target or whether it is required by different targets, as well. Another approach would be to use an internal header file keeping track of all defines shared between targets. While configuring the library, we will set various variables and let CMake configure the file, adding or removing defines based on what has been configured. Like this, one can easily keep track of the current environment by simply inspecting the header file. Furthermore, these dependencies are becoming clear inside the CMakeLists.txt, as instead of simply adding a define, we now call e.g. `SET(GIT_THREADSAFE 1)`. Having this header file though requires us to make sure it is always included before any "#ifdef"-preprocessor checks are executed. As we have already refactored code to always include the "common.h" header file before any statement inside of a file, this becomes easy: just make sure "common.h" includes the new "features.h" header file first.
35087f0e	2017-06-28T15:42:54	cmake: create separate CMakeLists.txt for tests Our CMakeLists.txt is very unwieldy in its current size, spanning more than 700 lines of code. Furthermore, it has several issues regarding scoping, where for example some defines, includes, etc. from our test suite are also applied to our normal library code. To fix this, we can separate out build instructions for our tests and move them into their own CMakeLists.txt in the "tests" directory. This reduced complexity of the root CMakeLists.txt file and fixes the issues regarding leaking build context from tests into the library.
3267115f	2017-06-28T15:41:15	cmake: create own precompiled headers for tests As soon as we split up our CMakeBuild.txt build instructions, we will be unable to simply link against the git2 library's precompiled header from other targets. To avoid this future breakage, create a new precompiled header for our test suite. Next to being compatible with the split, this enables us to also include additional files like the clar headers, which may help speeding up compilation of the test suite.
caab8270	2017-06-23T19:07:01	cmake: create object library target Currently, we're compiling our library code twice, once as part of the libgit2 library and once for the libgit2_clar executable. Since CMake 2.8.8, there exists a new library type OBJECT, which represents an intermediate target which can then subsequently be used when linking several targets against the same set of objects. Use an OBJECT library to create an internal library for linking. This new target is only used on CMake v2.8.8 or newer. As CMake 3.0 changed the way how generator expressions are evaluated when accessing properties, we need to enable CMake policy 0051 to keep `IDE_SPLIT_SOURCES` functioning.
f33911e5	2017-06-23T18:32:48	cmake: remove unused variable "CLAR_RESOURCES" Once upon a time, the `CLAR_RESOURCES` variable was intended to set the `CLAR_RESOURCES` define. But actually, the define uses a wrong variable name by accident, hinting that its value cannot actually be used at all, as it is empty. Searching through the code base confirms the guess that the define is not used at all. Remove both the variable and definition.
096a49c0	2017-07-03T08:45:57	cmake: try to detect threads library While we already make use of the variable `${CMAKE_THREAD_LIBS_INIT}`, it is actually undefined due to us never including the "FindThreads" module in the CMakeLists.txt. It is rather curious as to why this has never triggered any error up to now, but it does in fact result in linking errors on some Unix platforms as soon as we split up our build instructions into multiple files. Fix the issue now to avoid future breakage by including the "FindThreads" module.
56893bb9	2017-06-28T12:11:44	cmake: consistently use TARGET_INCLUDE_DIRECTORIES if available Instead of using INCLUDE_DIRECTORIES again for the libgit2_clar test suite, we should just be using TARGET_INCLUDE_DIRECTORIES again if the CMake version is greater than 2.8.11.
22de81e6	2017-06-21T08:25:36	cmake: use `target_include_directories` for modern cmake Apply `target_include_directories` when CMAKE_VERSION >= 2.8.12
6b2133b4	2017-06-27T12:46:15	Merge pull request #4235 from pks-t/pks/out-of-tree-builds Out of tree builds
4305fcca	2017-05-10T12:14:36	cmake: generate clar.suite in binary directory Change the output path of generate.py to generate the clar.suite file inside of the binary directory. This fixes out of tree builds with read-only source trees as we now refrain from writing anything into the source tree.
845f661d	2017-06-21T20:02:48	cmake: Permit disabling external http-parser When attempting to build libgit2 as an isolated static lib, CMake gleefully attempts to use the system http-parser. This is typically seen on Linux systems which install header files with every package, such as Gentoo. Allow developers to forcibly disable using the system http-parser with the config switch USE_EXT_HTTP_PARSER. Defaults to ON to maintain previous behavior. Signed-off-by: Jason Cooper <jason@lakedaemon.net>
a64532e1	2017-06-13T11:05:09	cmake: disable optimization on debug builds While our debug builds on MSVC platforms already tune the code optimizer to aid debugging code, all the other platforms still use the default optimization level. This makes it hard for developers on these platforms to actually debug code while maintaining his sanity due to optimizations like inlined code, elided variables etc. To help this common use case, we can simply follow the MSVC example and turn off code optimization with "-O0" for debug builds. While it would be preferable to instead use "-Og" supported by more modern compilers, we cannot guarantee that this level is available on all supported platforms.
61399953	2017-06-13T11:03:38	cmake: set "-D_DEBUG" on non-Windows platforms In our code base, we have some occasions where we use the "_DEBUG" preprocessor macro to enable additional code which should not be part of release builds. While we define this flag on MSVC platforms, it is guarded by the conditional `WIN32 AND NOT CYGWIN` on other platforms since 19be3f9e6 (Improve MSVC compiler, linker flags, 2013-02-13). While this condition can be fulfilled by the MSVC platform, it is never encountered due to being part of the `ELSE` part of `IF (MSVC)`. The intention of the conditional was most likely to avoid the preprocessor macro on Cygwin platforms, but to include it on everthing else. As such, the correct condition here would be `IF (NOT CYGWIN)` instead. But digging a bit further, the condition is only ever used in two places: 1. To skip the test in "core::structinit", which should also work on Cygwin. 2. In "src/win32/git2.rc", where it is used to set additional file flags. As this file is included in MSVC builds only, it cannot cause any harm to set "_DEBUG" on Cygwin here. As such, we can simply drop the conditional and always set "-D_DEBUG" on all platforms.
e94be4c0	2017-06-13T11:08:19	cmake: remove stale comment on precompiled headers In commit 9f75a9ce7 (Turning on runtime checks when building debug under MSVC., 2012-03-30), we introduced a comment "Precompiled headers", which actually refers to no related commands. Seeing that the comment never had anything to refer to, we can simply remove it here.
db1abffa	2017-06-07T14:59:38	sha1dc: do not use standard includes The updated SHA1DC library allows us to use custom includes instead of using standard includes. Due to requirements with cross-platform, we provide some custom system includes files like for example the "stdint.h" file on Win32. Because of this, we want to make sure to avoid breaking cross-platform compatibility when SHA1DC is enabled. To use the new mechanism, we can simply define `SHA1DC_NO_STANDARD_INCLUDES`. Furthermore, we can specify custom include files via two defines, which we now use to include our "common.h" header.
f218508f	2017-06-07T10:54:48	ctest: temporarily disable UNC path tests (Temporarily) disable UNC path tests to work around AppVeyor issues.
a4de1ae3	2017-04-25T10:14:19	cmake: define GIT_HTTPS when HTTPS is supported
9f128d2a	2017-03-02T20:56:47	cmake: drop unset `SHA1_TYPE` We never set `SHA1_TYPE` to `builtin`. Don't bother testing for it.
2dfd1294	2017-02-24T13:34:01	hash: include sha1collisiondetection Include the SHA1 collision attack detection library from https://github.com/cr-marcstevens/sha1collisiondetection
a371a8ae	2017-02-24T13:03:15	hash: rename implementation selection constants
a02e8a38	2017-03-01T13:58:15	cmake: only enable supported compiler warning flags We currently unconditionally enable the "-Wall" and "-Wextra" flags. Some platforms rely on compilers which do not support these flags, though. One of these platforms is Haiku, which does not support "-Wextra" due to being stuck on GCC version 2. Fix builds on such platforms by adding these flags only if supported by the compiler.
e56e4c76	2016-12-30T17:59:47	CMakeLists: Move `http-parser` block down by `zlib`, update error message
236a690c	2016-11-20T22:46:01	Allow Windows with WinHTTP to use external http-parser
36117978	2016-10-06T18:30:30	Fix the existence check for `regcomp_l`. `xlocale.h` only defines `regcomp_l` if `regex.h` was included as well. Also change the test cases to actually test `p_regcomp` works with a multibyte locale.
ab96ca55	2016-10-06T13:15:31	Make sure we use the `C` locale for `regcomp` on macOS.
528b2f7d	2016-09-05T13:24:07	cmake: add curl library path The `PKG_CHECK_MODULES` function searches a pkg-config module and then proceeds to set various variables containing information on how to link to the library. In contrast to the `FIND_PACKAGE` function, the library path set by `PKG_CHECK_MODULES` will not necessarily contain linking instructions with a complete path to the library, though. So when a library is not installed in a standard location, the linker might later fail due to being unable to locate it. While we already honor this when configuring libssh2 by adding `LIBSSH2_LIBRARY_DIRS` to the link directories, we fail to do so for libcurl, preventing us to build libgit2 on e.g. FreeBSD. Fix the issue by adding the curl library directory to the linker search path.
b6a2fd0e	2016-06-20T11:09:49	cmake: do not use -fPIC for MSYS2 The MSYS2 build system automatically compiles all code with position-independent code. When we manually add the -fPIC flag to the compiler flags, MSYS2 will loudly complain about PIC being the default and thus not required. Fix the annoyance by stripping -fPIC in MSYS2 enviroments like it is already done for MinGW.
0aaba445	2016-06-01T11:33:58	Merge pull request #3796 from mmuman/haiku Preliminary Haiku port
13b0b7d5	2016-05-27T10:20:35	Update CMakeLists.txt typo fix
d94f5037	2016-05-22T23:23:58	CMakeLists: Add libnetwork for Haiku
097b0761	2016-04-29T10:18:04	cmake: include threading libraries in pkg-config Include any required threading libraries in our `libgit2.pc`.
b8353236	2016-04-19T10:50:30	CI: run proxy tests with ctest Running clar directly on appveyor makes it think the command returned failure, so it stops the tests. Running it via ctest lets it go through.
035430b7	2016-03-24T14:10:29	CMakeLists: Further improve the error messages regarding CMAKE_SIZEOF_VOID_P
f9601e6f	2016-03-23T20:37:39	CMakeLists: Show the pointer size for an unsupported architecture Showing the pointer size gives a hint as to why we think this is an unsupported architecture.
3a43677e	2016-03-18T06:37:04	Merge pull request #3660 from mstrap/mingw MinGW builds should optionally create DLLs without "lib" prefix
059f33bf	2016-03-15T18:32:37	Option "LIBGIT2_PREFIX" to set the CMAKE's TARGET_PROPERTIES PREFIX This is especially useful in combination with MinGW to yield the Windows-compliant DLL name "git2.dll" instead of "libgit2.dll"
08f030ce	2016-03-15T18:20:32	CMake: do not overwrite but only append to CMAKE_C_FLAGS_DEBUG This is useful to force "smart" IDEs (like CLIon) to use debug flag -g even it may have decided that "-D_DEBUG" (which is already present) is sufficient.
2d880712	2016-03-03T15:08:12	Enable nanosecond resolution by default Nanosecond resolution is now the default in git itself. Enable this as our default as well.
ba9bb664	2016-03-03T19:21:07	tests: create a ctest target for cred_callback
6cc4bac8	2016-02-28T11:31:10	Merge pull request #3577 from rossdylan/rossdylan/pooldebug Add a new build flag to disable the pool allocator
3d6a42d1	2016-02-25T11:23:19	nsec: support NDK's crazy nanoseconds Android NDK does not have a `struct timespec` in its `struct stat` for nanosecond support, instead it has a single nanosecond member inside the struct stat itself. We will use that and use a macro to expand to the `st_mtim` / `st_mtimespec` definition on other systems (much like the existing `st_mtime` backcompat definition).
ed0571f8	2016-01-12T16:08:38	Add a new build flag to disable the pool allocator and pass all git_pool_malloc calls straight to git__malloc
8a0133c0	2016-01-05T19:07:27	Add winhttp dependencies to pc file.
0878ca9b	2015-10-07T10:31:07	CMakeLists: Compare CMAKE_SIZEOF_VOID_P as a number, not as a string
eb11fac6	2015-11-20T18:57:13	Detect stat's structure
75a0ccf5	2015-11-12T19:53:09	Merge pull request #3170 from CmdrMoozy/nsec_fix git_index_entry__init_from_stat: set nsec fields in entry stats
7208ff4d	2015-10-22T20:17:19	cmake: split sources into original paths for Xcode and MSVC The MSVC_SPLIT_SOURCES function is helpful for other IDEs, like Xcode, and will split the source files up into their target directories, instead of merely placing them all in a "Sources" directory. Rename MSVC_SPLIT_SOURCES to IDE_SPLIT_SOURCES and enable it for Xcode.
ac7e50dd	2015-10-14T08:30:51	Merge pull request #3453 from libgit2/cmn/warn-python CMake: be more explicit with python errors
e3f94c71	2015-10-06T13:35:45	CMake: be more explicit with python errors There's been a few reports of users not understanding what the python error means, so spell out the options they have.
c7b17fb5	2015-10-01T18:01:32	Merge branch 'master' into nsec_fix_next
ba1a5553	2015-09-30T17:44:10	Merge pull request #3446 from ethomson/portability portability: use `CHECK_FUNCTION_EXISTS` for checking whether functions exist...
e683d152	2015-09-30T05:49:04	qsort_r/qsort_s: detect their support
8649dfd8	2015-09-29T13:36:37	p_futimes: support using futimens when available
360dd4da	2015-06-23T10:02:48	win32: define our own POSIX struct stat, and support USE_NSEC
c963fe1d	2015-06-23T09:05:49	cmake: fix CMake code organization problem
e9e6df2c	2015-06-15T09:28:55	cmake: Only provide USE_NSEC if struct stat members are avilable. This allows us to remove OS checks from source code, instead relying on CMake to detect whether or not `struct stat` has the nanoseconds members we rely on.
e7de893e	2015-06-01T13:43:54	cmake: add USE_NSEC, and only check nanosec m/ctime if enabled
5540d9db	2015-09-10T16:11:10	pkg-config: fix directory references in libgit2.pc Before: libdir=/usr//usr/lib64 includedir=/usr//usr/include After: libdir=/usr/lib64 includedir=/usr/include (note the duplication of /usr in the before case)
01fe8374	2015-09-03T13:35:15	Revert "Get rid of libssh2 embedding" The embedding was removed as a libssh2 release with Windows crypto support became available, but dependencies are still annoying so this ahs been requested again. This reverts commit 20dcb7315cd4c5760c68402998fd9e5a6bf5505d.
b445940e	2015-08-19T12:53:31	CMake: fall back to OpenSSL on older OS X Starting at OS X 10.8, the Security framework offers some functions which are unified across OS X and iOS. These are the functions that we use. Older versions of OS X do not have these functions and we fail to compile. In these situations, fall back to using OpenSSL for our TLS stream instead.
c27b4afc	2015-08-06T11:06:17	Forcing libssh2 lib location OS X may have libssh2 in diff locations, so CHECK_LIBRARY_EXISTS may check the wrong lib; forcing it to use a found directory.
2da64edb	2015-07-27T18:28:29	Add -Wdocumentation flag if supported
a522d8c1	2015-07-11T17:35:59	Merge pull request #3292 from tkelman/patch-1 Increase required version of cmake to 2.8
37c84dc5	2015-07-05T10:07:48	Increase required version of cmake to 2.8
93b42728	2015-06-09T14:38:30	Include stacktrace summary in memory leak output.
fd2d11a1	2015-06-28T13:57:06	CMake: treat the ld flags as a list These are treated as a list by CMake itself, which means that treating them as a simple string can put semicolons in our ld command-line if we have libraries which are not installed on the standard locations. Treat the variable as a CMake list and replace it with the space-delimited list just before writing it out to our pc file.
790cabf0	2015-06-26T13:51:41	pc: Put libcurl and libssh2 in Libs.private Pass on to whoever wants to link to libgit2 statically the flags that we would have used for these libraries. Putting them in Requires.private as we do now makes pkg-config put their dependencies in the linker arguments as well, which is not what we want.
65f2d155	2015-06-25T21:49:48	List `libcurl` in the generated `libgit2.pc`
cf9d5f76	2015-06-03T04:57:00	curl: find and link with the library if it's available by default
e488bef4	2015-06-19T12:53:37	Quote LIBSSH2_LIBRARIES call Credits to @directhex It is possible for PKG_CHECK_MODULES(LIBSSH2 libssh2) to LIBSSH2_LIBRARIES to a string with more than one library in it - e.g. if your libssh2 was built against libgcrypt, it will be "ssh2;gcrypt" Quoting the string is needed, or CHECK_LIBRARY_EXISTS will fail.
1679ec12	2015-05-24T18:27:15	cmake: Add CMake check for libssh2 memory credential passing support

bbb213c1

2017-11-11T13:19:24

cmake: let USE_ICONV be optional on macOS Instead of forcing iconv support on macOS (by forcing `USE_ICONV` on), honor the `USE_ICONV` option only on macOS. Although macOS includes iconv by default, some macOS users may have a deficient installation for some reason and they should be provided a workaround to use libgit2 even in this situation. iconv support is now disabled entirely on non-macOS platforms. No other platform supports core.precomposeunicode, and iconv should never be linked.

a0b0b808

2017-11-11T14:03:14

cmake: Allow user to select bundled zlib Under some circumstances the installed / system version of zlib may not be desirable due to being too old or buggy. This patch adds the option `USE_BUNDLED_ZLIB` that will cause the bundled version of zlib to be used. We may also want to add similar functionality to allow the user to select other bundled 3rd-party dependencies instead of using the system versions. /cc @pks-t @ethomson

c9bb68c2

2017-09-07T00:41:54

cmake: move Darwin-specific block around This allows us to only link against CoreFoundation when using the SecureTransport backend

9980be03

2017-09-06T22:13:58

cmake: Add USE_HTTPS as a CMake option It defaults to ON, e.g. "pick whatever default is appropriate for the platform". It accepts one of SecureTransport, OpenSSL, WinHTTP, or OFF. It errors if the backend library couldn't be found.

10b25dbf

2017-08-10T00:03:30

cmake: braces are not needed here

fdd06874

2017-08-09T21:35:53

cmake: use FeatureSummary to display which features we end up using

4da74c83

2017-10-20T07:29:17

cmake: use project-relative binary and source directories Due to our split of CMake files into multiple modules, we had to replace some uses of the `${CMAKE_CURRENT_SOURCE_DIR}` and `${CMAKE_CURRENT_BINARY_DIR}` variables and replace them with `${CMAKE_SOURCE_DIR}` and `${CMAKE_BINARY_DIR}`. This enabled us to still be able to refer to top-level files when defining build instructions inside of a subdirectory. When replacing all variables, it was assumed that the absolute set of variables is always relative to the current project. But in fact, this is not the case, as these variables always point to the source and binary directory as given by the top-levl project. So the change actually broke the ability to include libgit2 directly as a subproject, as source files cannot be found anymore. Fix this by instead using project-specific source and binary directories with `${libgit2_SOURCE_DIR}` and `${libgit2_BINARY_DIR}`.

8bbee8f3

2017-10-14T08:36:54

Fix compilation for CMake versions 3.0.x where x >= 1 Apparently policy CMP0015 was added in CMake 3.1. With CMake 3.0.2, the build was failing with CMake Error at CMakeLists.txt:18 (CMAKE_POLICY): Policy "CMP0051" is not known to this version of CMake. This patch makes it work.

8ac8c78c

2017-10-09T15:15:08

Merge pull request #4356 from pks-t/pks/static-clar cmake: use static dependencies when building static libgit2

49551254

2017-09-22T09:34:37

cmake: use static dependencies when building static libgit2 CMake allows us to build a static library by simply setting the variable `BUILD_SHARED_LIBS` to `OFF`. While this causes us to create a static libgit2.a archive, it will not automatically cause CMake to only locate static archives when searching for dependencies. This does no harm in case of building our libgit2.a, as we do not want to include all required dependencies in the resulting archive anyway. Instead, we ask users of a static libgit2.a to link against the required set of static archives themselves, typically aided by the libgit2.pc file. Where it does cause harm, though, is when we build the libgit2_clar test suite. CMake has happily populated our LIBGIT2_LIBS variable with shared libraries, and so linking the final libgit2_clar test does not do the right thing. It will simply ignore those shared libraries, we end up with a test suite with undefined symbols. To fix the issue, we can instruct CMake to only locate libraries with a certain suffix. As static libraries are typically identifiable by their ".a" suffix on Unix-based systems, we can instruct CMake to only locate libraries with this suffix to restrict it from finding any shared libraries. This fixes building a static libgit2_clar test suite. Note that this ignores the problem on Windows. The problem here is that we cannot even distinguish static and dynamic libraries by only inspecting their suffix. So we just ignore the problem on Windows, for now.

cf9f3452

2017-09-06T07:38:32

cmake: bump minimum version to 2.8.11 Our current minimum CMake version is 2.8. This version does not yet allow us to use object libraries (introduced in 2.8.8) and target include directories (introduced in 2.8.12), which are both mechanisms we want to use to fix some specific problems. We previously were not able to bump our CMake version to a version supporting object libraries because Ubuntu Precise only had CMake version 2.8.7 in its repositories. But due to Precise being end of life now, we shouldn't need to honor it anymore. A current survey of some of the more conservative distributions brings up the following versions of CMake: - CentOS 5: 2.6.2 - CentOS 6: 2.8.12.2 - Debian 7: 2.8.11 - Fedora 23: 3.3.2 - OpenSUSE 13.2: 3.0.2 - Ubuntu Precise: 2.8.7 - Ubuntu Trusty: 2.8.12 The only two outliers here are CentOS 5 and Ubuntu Precise. CentOS is currently unsupported due to our minimum version being 2.8 and Ubuntu Precise is not maintained anymore. So the next smallest version supported by all major distributions is 2.8.11. While this does not yet support target include directories, it at least enables us to use object libraries. So this becomes our new minimum required version.

524c1d3c

2017-09-20T07:48:19

Merge pull request #4334 from pks-t/pks/reproducible-builds Reproducible builds

54214d61

2017-09-15T10:28:32

cmake: fix linker error with dbghelper library When the MSVC_CRTDBG option is set by the developer, we will link in the dbghelper library to enable memory lead detection in MSVC projects. We are doing so by adding it to the variable `CMAKE_C_STANDARD_LIBRARIES`, so that it is linked for every library and executable built by CMake. But this causes our builds to fail with a linker error: ``` LINK: fatal error LNK1104: cannot open file 'advapi32.lib;Dbghelp.lib' ``` The issue here is that we are treating the variable as if it were an array of libraries by setting it via the following command: ``` SET(CMAKE_C_STANDARD_LIBRARIES "${CMAKE_C_STANDARD_LIBRARIES}" "Dbghelp.lib") ``` The generated build commands will then simply stringify the variable, concatenating all the contained libraries with a ";". This causes the observed linking failure. To fix the issue, we should just treat the variabable as a simple string. So instead of adding multiple members, we just add the "Dbghelp.lib" library to the existing string, separated by a space character.

d630887b

2017-08-30T21:47:12

cmake: enable reproducible static linking By default, both ar(1) and ranlib(1) will insert additional information like timestamps into generated static archives and indices. As a consequence, generated static archives are not deterministic when created with default parameters. Both programs do support a deterministic mode, which will simply zero out undeterministic information with `ar D` and `ranlib -D`. Unfortunately, CMake does not provide an easy knob to add these command line parameters. Instead, we have to redefine the complete command definitons stored in the variables CMAKE_C_ARCHIVE_CREATE, CMAKE_C_ARCHIVE_APPEND and CMAKE_C_ARCHIVE_FINISH. Introduce a new build option `ENABLE_REPRODUCIBLE_BUILDS`. This option is available on Unix-like systems with the exception of macOS, which does not have support for the required flags. If the option is being enabled, we add those flags to the invocation of both `ar` and `ranlib` to enable deterministically building the static archive.

175ab8e7

2017-08-25T17:36:24

cmake: add switch to build with -Werror Add a simple switch to enable building with "-Werror=<warning>" instead of "-W<warning". Due to the encapsulated `ENABLE_WARNINGS` macro, this is as simple as adding a new variable "ENABLE_WERROR`, which can be passed on the command line via `-DENABLE_WERROR=ON`. The variable defaults to NO to not bother developers in their day to day work.

4a46a8c1

2017-08-25T17:32:54

cmake: encapsulate enabling/disabling compiler warnings There are multiple sites where we enable or disable compiler warning via "-W<warning>" or "-Wno-<warning>". As we want to extend this mechanism later on to conditionally switch these over to "-Werror=<warning>", we encapsulate the logic into its their own macros `ENABLE_WARNINGS` and `DISABLE_WARNINGS`. Note that we in fact have to use a macro here. Using a function would not modify the CFLAGS inside of the callers scope, but in the function's scope only.

e5c9723d

2017-06-30T18:12:02

cmake: move library build instructions into subdirectory To fix leaking build instructions into different targets and to make the build instructions easier to handle, create a new CMakeLists.txt file containing build instructions for the libgit2 target. By now, the split is rather easy to achieve. Due to the preparatory steps, we can now simply move over all related build instructions, only needing to remove the "src/" prefix from some files.

72f27cb6

2017-06-30T17:02:00

cmake: fix up source and binary directory paths There are quite some uses of the variables "${CMAKE_CURRENT_SOURCE_DIR}" and "${CMAKE_CURRENT_BINARY_DIR}" where they are not appropriate. Convert these sites to instead use the variables "${CMAKE_SOURCE_DIR}" and "${CMAKE_BINARY_DIR}", which instead point to the project's root directory. This will ease splitting up the library build instructions into its own subdirectory.

1f43a43d

2017-06-28T13:28:33

cmake: move zlib build instructions into subdirectory Extract code required to build the zlib library into its own CMakeLists.txt, which is included as required.

b7514554

2017-06-28T13:25:09

cmake: move http-parser build instructions into subdirectory Extract code required to build the http-parser library into its own CMakeLists.txt, which is included as required.

9e449e52

2017-06-28T13:23:45

cmake: move regex build instructions into subdirectory Extract code required to build the regex library into its own CMakeLists.txt, which is included as required.

43248500

2017-06-28T13:21:09

cmake: move winhttp build instructions into subdirectory Extract code required to build the winhttp library into its own CMakeLists.txt, which is included as required.

bed7ca3a

2017-06-30T16:57:16

cmake: define WIN_RC with other platform sources This makes splitting up the library build instructions later on more obvious and easier to achieve.

8ee90c39

2017-06-28T13:16:38

cmake: find dependencies after setting build flags This makes splitting up the library build instructions later on more obvious and easier to achieve.

c3635130

2017-06-28T13:14:23

cmake: move definition of Win32 flags together This makes splitting up the library build instructions later on more obvious and easier to achieve.

32a2e500

2017-07-01T13:41:36

cmake: inline TARGET_OS_LIBRARIES function Previous to keeping track of libraries and linking directories via variables, we had two call sites of the `TARGET_OS_LIBRARIES` function to avoid duplicating knowledge on required operating system library dependencies. But as the libgit2_clar target now re-uses defined variables to link against these libraries, we can simply inline the function.

8e31cc25

2017-06-28T12:51:14

cmake: keep track of libraries and includes via lists Later on, we will move detection of required libraries, library directories as well as include directories into a separate CMakeLists.txt file inside of the source directory. Obviously, we want to avoid duplication here regarding these parameters. To prepare for the split, put the parameters into three variables LIBGIT2_LIBS, LIBGIT2_LIBDIRS and LIBGIT2_INCLUDES, tracking the required libraries, linking directory as well as include directories. These variables can later be exported into the parent scope from inside of the source build instructions, making them readily available for the other subdirectories.

dd332e2a

2017-06-23T20:42:41

cmake: use absolute path to deps When refering to files and directories inside of the top-level "deps/" directory, we're being inconsistent in using relative or absolute paths. To enable splitting out parts of the top-level CMakeLists.txt into an own file in the "src/" directory, consistently switch over to use absolute paths to avoid errors when converting.

8341d6cf

2017-07-04T10:57:28

cmake: move regcomp and futimens checks to "features.h" In our CMakeLists.txt, we have to check multiple functions in order to determine if we have to use our own or whether we can use the platform-provided one. For two of these functions, namely `regcomp_l()` and `futimens`, the defined macro is actually used inside of the header file "src/unix/posix.h". As such, these macros are not only required by the library, but also by our test suite, which is makes use of internal headers. To prepare for the CMakeLists.txt split, move these two defines inside of the "features.h" header.

a390a846

2017-07-01T13:06:00

cmake: move defines into "features.h" header In a future commit, we will split out the build instructions for our library directory and move them into a subdirectory. One of the benefits is fixing scoping issues, where e.g. defines do not leak to build targets where they do not belong to. But unfortunately, this does also pose the problem of how to propagate some defines which are required by both the library and the test suite. One way would be to create another variable keeping track of all added defines and declare it inside of the parent scope. While this is the most obvious and simplest way of going ahead, it is kind of unfortunate. The main reason to not use this is that these defines become implicit dependencies between the build targets. By simply observing a define inside of the CMakeLists.txt file, one cannot reason whether this define is only required by the current target or whether it is required by different targets, as well. Another approach would be to use an internal header file keeping track of all defines shared between targets. While configuring the library, we will set various variables and let CMake configure the file, adding or removing defines based on what has been configured. Like this, one can easily keep track of the current environment by simply inspecting the header file. Furthermore, these dependencies are becoming clear inside the CMakeLists.txt, as instead of simply adding a define, we now call e.g. `SET(GIT_THREADSAFE 1)`. Having this header file though requires us to make sure it is always included before any "#ifdef"-preprocessor checks are executed. As we have already refactored code to always include the "common.h" header file before any statement inside of a file, this becomes easy: just make sure "common.h" includes the new "features.h" header file first.

35087f0e

2017-06-28T15:42:54

cmake: create separate CMakeLists.txt for tests Our CMakeLists.txt is very unwieldy in its current size, spanning more than 700 lines of code. Furthermore, it has several issues regarding scoping, where for example some defines, includes, etc. from our test suite are also applied to our normal library code. To fix this, we can separate out build instructions for our tests and move them into their own CMakeLists.txt in the "tests" directory. This reduced complexity of the root CMakeLists.txt file and fixes the issues regarding leaking build context from tests into the library.

3267115f

2017-06-28T15:41:15

cmake: create own precompiled headers for tests As soon as we split up our CMakeBuild.txt build instructions, we will be unable to simply link against the git2 library's precompiled header from other targets. To avoid this future breakage, create a new precompiled header for our test suite. Next to being compatible with the split, this enables us to also include additional files like the clar headers, which may help speeding up compilation of the test suite.

caab8270

2017-06-23T19:07:01

cmake: create object library target Currently, we're compiling our library code twice, once as part of the libgit2 library and once for the libgit2_clar executable. Since CMake 2.8.8, there exists a new library type OBJECT, which represents an intermediate target which can then subsequently be used when linking several targets against the same set of objects. Use an OBJECT library to create an internal library for linking. This new target is only used on CMake v2.8.8 or newer. As CMake 3.0 changed the way how generator expressions are evaluated when accessing properties, we need to enable CMake policy 0051 to keep `IDE_SPLIT_SOURCES` functioning.

f33911e5

2017-06-23T18:32:48

cmake: remove unused variable "CLAR_RESOURCES" Once upon a time, the `CLAR_RESOURCES` variable was intended to set the `CLAR_RESOURCES` define. But actually, the define uses a wrong variable name by accident, hinting that its value cannot actually be used at all, as it is empty. Searching through the code base confirms the guess that the define is not used at all. Remove both the variable and definition.

096a49c0

2017-07-03T08:45:57

cmake: try to detect threads library While we already make use of the variable `${CMAKE_THREAD_LIBS_INIT}`, it is actually undefined due to us never including the "FindThreads" module in the CMakeLists.txt. It is rather curious as to why this has never triggered any error up to now, but it does in fact result in linking errors on some Unix platforms as soon as we split up our build instructions into multiple files. Fix the issue now to avoid future breakage by including the "FindThreads" module.

56893bb9

2017-06-28T12:11:44

cmake: consistently use TARGET_INCLUDE_DIRECTORIES if available Instead of using INCLUDE_DIRECTORIES again for the libgit2_clar test suite, we should just be using TARGET_INCLUDE_DIRECTORIES again if the CMake version is greater than 2.8.11.

22de81e6

2017-06-21T08:25:36

cmake: use `target_include_directories` for modern cmake Apply `target_include_directories` when CMAKE_VERSION >= 2.8.12

6b2133b4

2017-06-27T12:46:15

Merge pull request #4235 from pks-t/pks/out-of-tree-builds Out of tree builds

4305fcca

2017-05-10T12:14:36

cmake: generate clar.suite in binary directory Change the output path of generate.py to generate the clar.suite file inside of the binary directory. This fixes out of tree builds with read-only source trees as we now refrain from writing anything into the source tree.

845f661d

2017-06-21T20:02:48

cmake: Permit disabling external http-parser When attempting to build libgit2 as an isolated static lib, CMake gleefully attempts to use the system http-parser. This is typically seen on Linux systems which install header files with every package, such as Gentoo. Allow developers to forcibly disable using the system http-parser with the config switch USE_EXT_HTTP_PARSER. Defaults to ON to maintain previous behavior. Signed-off-by: Jason Cooper <jason@lakedaemon.net>

a64532e1

2017-06-13T11:05:09

cmake: disable optimization on debug builds While our debug builds on MSVC platforms already tune the code optimizer to aid debugging code, all the other platforms still use the default optimization level. This makes it hard for developers on these platforms to actually debug code while maintaining his sanity due to optimizations like inlined code, elided variables etc. To help this common use case, we can simply follow the MSVC example and turn off code optimization with "-O0" for debug builds. While it would be preferable to instead use "-Og" supported by more modern compilers, we cannot guarantee that this level is available on all supported platforms.

61399953

2017-06-13T11:03:38

cmake: set "-D_DEBUG" on non-Windows platforms In our code base, we have some occasions where we use the "_DEBUG" preprocessor macro to enable additional code which should not be part of release builds. While we define this flag on MSVC platforms, it is guarded by the conditional `WIN32 AND NOT CYGWIN` on other platforms since 19be3f9e6 (Improve MSVC compiler, linker flags, 2013-02-13). While this condition can be fulfilled by the MSVC platform, it is never encountered due to being part of the `ELSE` part of `IF (MSVC)`. The intention of the conditional was most likely to avoid the preprocessor macro on Cygwin platforms, but to include it on everthing else. As such, the correct condition here would be `IF (NOT CYGWIN)` instead. But digging a bit further, the condition is only ever used in two places: 1. To skip the test in "core::structinit", which should also work on Cygwin. 2. In "src/win32/git2.rc", where it is used to set additional file flags. As this file is included in MSVC builds only, it cannot cause any harm to set "_DEBUG" on Cygwin here. As such, we can simply drop the conditional and always set "-D_DEBUG" on all platforms.

e94be4c0

2017-06-13T11:08:19

cmake: remove stale comment on precompiled headers In commit 9f75a9ce7 (Turning on runtime checks when building debug under MSVC., 2012-03-30), we introduced a comment "Precompiled headers", which actually refers to no related commands. Seeing that the comment never had anything to refer to, we can simply remove it here.

db1abffa

2017-06-07T14:59:38

sha1dc: do not use standard includes The updated SHA1DC library allows us to use custom includes instead of using standard includes. Due to requirements with cross-platform, we provide some custom system includes files like for example the "stdint.h" file on Win32. Because of this, we want to make sure to avoid breaking cross-platform compatibility when SHA1DC is enabled. To use the new mechanism, we can simply define `SHA1DC_NO_STANDARD_INCLUDES`. Furthermore, we can specify custom include files via two defines, which we now use to include our "common.h" header.

f218508f

2017-06-07T10:54:48

ctest: temporarily disable UNC path tests (Temporarily) disable UNC path tests to work around AppVeyor issues.

a4de1ae3

2017-04-25T10:14:19

cmake: define GIT_HTTPS when HTTPS is supported

9f128d2a

2017-03-02T20:56:47

cmake: drop unset `SHA1_TYPE` We never set `SHA1_TYPE` to `builtin`. Don't bother testing for it.

2dfd1294

2017-02-24T13:34:01

hash: include sha1collisiondetection Include the SHA1 collision attack detection library from https://github.com/cr-marcstevens/sha1collisiondetection

a371a8ae

2017-02-24T13:03:15

hash: rename implementation selection constants

a02e8a38

2017-03-01T13:58:15

cmake: only enable supported compiler warning flags We currently unconditionally enable the "-Wall" and "-Wextra" flags. Some platforms rely on compilers which do not support these flags, though. One of these platforms is Haiku, which does not support "-Wextra" due to being stuck on GCC version 2. Fix builds on such platforms by adding these flags only if supported by the compiler.

e56e4c76

2016-12-30T17:59:47

CMakeLists: Move `http-parser` block down by `zlib`, update error message

236a690c

2016-11-20T22:46:01

Allow Windows with WinHTTP to use external http-parser

36117978

2016-10-06T18:30:30

Fix the existence check for `regcomp_l`. `xlocale.h` only defines `regcomp_l` if `regex.h` was included as well. Also change the test cases to actually test `p_regcomp` works with a multibyte locale.

ab96ca55

2016-10-06T13:15:31

Make sure we use the `C` locale for `regcomp` on macOS.

528b2f7d

2016-09-05T13:24:07

cmake: add curl library path The `PKG_CHECK_MODULES` function searches a pkg-config module and then proceeds to set various variables containing information on how to link to the library. In contrast to the `FIND_PACKAGE` function, the library path set by `PKG_CHECK_MODULES` will not necessarily contain linking instructions with a complete path to the library, though. So when a library is not installed in a standard location, the linker might later fail due to being unable to locate it. While we already honor this when configuring libssh2 by adding `LIBSSH2_LIBRARY_DIRS` to the link directories, we fail to do so for libcurl, preventing us to build libgit2 on e.g. FreeBSD. Fix the issue by adding the curl library directory to the linker search path.

b6a2fd0e

2016-06-20T11:09:49

cmake: do not use -fPIC for MSYS2 The MSYS2 build system automatically compiles all code with position-independent code. When we manually add the -fPIC flag to the compiler flags, MSYS2 will loudly complain about PIC being the default and thus not required. Fix the annoyance by stripping -fPIC in MSYS2 enviroments like it is already done for MinGW.

0aaba445

2016-06-01T11:33:58

Merge pull request #3796 from mmuman/haiku Preliminary Haiku port

13b0b7d5

2016-05-27T10:20:35

Update CMakeLists.txt typo fix

d94f5037

2016-05-22T23:23:58

CMakeLists: Add libnetwork for Haiku

097b0761

2016-04-29T10:18:04

cmake: include threading libraries in pkg-config Include any required threading libraries in our `libgit2.pc`.

b8353236

2016-04-19T10:50:30

CI: run proxy tests with ctest Running clar directly on appveyor makes it think the command returned failure, so it stops the tests. Running it via ctest lets it go through.

035430b7

2016-03-24T14:10:29

CMakeLists: Further improve the error messages regarding CMAKE_SIZEOF_VOID_P

f9601e6f

2016-03-23T20:37:39

CMakeLists: Show the pointer size for an unsupported architecture Showing the pointer size gives a hint as to why we think this is an unsupported architecture.

3a43677e

2016-03-18T06:37:04

Merge pull request #3660 from mstrap/mingw MinGW builds should optionally create DLLs without "lib" prefix

059f33bf

2016-03-15T18:32:37

Option "LIBGIT2_PREFIX" to set the CMAKE's TARGET_PROPERTIES PREFIX This is especially useful in combination with MinGW to yield the Windows-compliant DLL name "git2.dll" instead of "libgit2.dll"

08f030ce

2016-03-15T18:20:32

CMake: do not overwrite but only append to CMAKE_C_FLAGS_DEBUG This is useful to force "smart" IDEs (like CLIon) to use debug flag -g even it may have decided that "-D_DEBUG" (which is already present) is sufficient.

2d880712

2016-03-03T15:08:12

Enable nanosecond resolution by default Nanosecond resolution is now the default in git itself. Enable this as our default as well.

ba9bb664

2016-03-03T19:21:07

tests: create a ctest target for cred_callback

6cc4bac8

2016-02-28T11:31:10

Merge pull request #3577 from rossdylan/rossdylan/pooldebug Add a new build flag to disable the pool allocator

3d6a42d1

2016-02-25T11:23:19

nsec: support NDK's crazy nanoseconds Android NDK does not have a `struct timespec` in its `struct stat` for nanosecond support, instead it has a single nanosecond member inside the struct stat itself. We will use that and use a macro to expand to the `st_mtim` / `st_mtimespec` definition on other systems (much like the existing `st_mtime` backcompat definition).

ed0571f8

2016-01-12T16:08:38

Add a new build flag to disable the pool allocator and pass all git_pool_malloc calls straight to git__malloc

8a0133c0

2016-01-05T19:07:27

Add winhttp dependencies to pc file.

0878ca9b

2015-10-07T10:31:07

CMakeLists: Compare CMAKE_SIZEOF_VOID_P as a number, not as a string

eb11fac6

2015-11-20T18:57:13

Detect stat's structure

75a0ccf5

2015-11-12T19:53:09

Merge pull request #3170 from CmdrMoozy/nsec_fix git_index_entry__init_from_stat: set nsec fields in entry stats

7208ff4d

2015-10-22T20:17:19

cmake: split sources into original paths for Xcode and MSVC The MSVC_SPLIT_SOURCES function is helpful for other IDEs, like Xcode, and will split the source files up into their target directories, instead of merely placing them all in a "Sources" directory. Rename MSVC_SPLIT_SOURCES to IDE_SPLIT_SOURCES and enable it for Xcode.

ac7e50dd

2015-10-14T08:30:51

Merge pull request #3453 from libgit2/cmn/warn-python CMake: be more explicit with python errors

e3f94c71

2015-10-06T13:35:45

CMake: be more explicit with python errors There's been a few reports of users not understanding what the python error means, so spell out the options they have.

c7b17fb5

2015-10-01T18:01:32

Merge branch 'master' into nsec_fix_next

ba1a5553

2015-09-30T17:44:10

Merge pull request #3446 from ethomson/portability portability: use `CHECK_FUNCTION_EXISTS` for checking whether functions exist...

e683d152

2015-09-30T05:49:04

qsort_r/qsort_s: detect their support

8649dfd8

2015-09-29T13:36:37

p_futimes: support using futimens when available

360dd4da

2015-06-23T10:02:48

win32: define our own POSIX struct stat, and support USE_NSEC

c963fe1d

2015-06-23T09:05:49

cmake: fix CMake code organization problem

e9e6df2c

2015-06-15T09:28:55

cmake: Only provide USE_NSEC if struct stat members are avilable. This allows us to remove OS checks from source code, instead relying on CMake to detect whether or not `struct stat` has the nanoseconds members we rely on.

e7de893e

2015-06-01T13:43:54

cmake: add USE_NSEC, and only check nanosec m/ctime if enabled

5540d9db

2015-09-10T16:11:10

pkg-config: fix directory references in libgit2.pc Before: libdir=/usr//usr/lib64 includedir=/usr//usr/include After: libdir=/usr/lib64 includedir=/usr/include (note the duplication of /usr in the before case)

01fe8374

2015-09-03T13:35:15

Revert "Get rid of libssh2 embedding" The embedding was removed as a libssh2 release with Windows crypto support became available, but dependencies are still annoying so this ahs been requested again. This reverts commit 20dcb7315cd4c5760c68402998fd9e5a6bf5505d.

b445940e

2015-08-19T12:53:31

CMake: fall back to OpenSSL on older OS X Starting at OS X 10.8, the Security framework offers some functions which are unified across OS X and iOS. These are the functions that we use. Older versions of OS X do not have these functions and we fail to compile. In these situations, fall back to using OpenSSL for our TLS stream instead.

c27b4afc

2015-08-06T11:06:17

Forcing libssh2 lib location OS X may have libssh2 in diff locations, so CHECK_LIBRARY_EXISTS may check the wrong lib; forcing it to use a found directory.

2da64edb

2015-07-27T18:28:29

Add -Wdocumentation flag if supported

a522d8c1

2015-07-11T17:35:59

Merge pull request #3292 from tkelman/patch-1 Increase required version of cmake to 2.8

37c84dc5

2015-07-05T10:07:48

Increase required version of cmake to 2.8

93b42728

2015-06-09T14:38:30

Include stacktrace summary in memory leak output.

fd2d11a1

2015-06-28T13:57:06

CMake: treat the ld flags as a list These are treated as a list by CMake itself, which means that treating them as a simple string can put semicolons in our ld command-line if we have libraries which are not installed on the standard locations. Treat the variable as a CMake list and replace it with the space-delimited list just before writing it out to our pc file.

790cabf0

2015-06-26T13:51:41

pc: Put libcurl and libssh2 in Libs.private Pass on to whoever wants to link to libgit2 statically the flags that we would have used for these libraries. Putting them in Requires.private as we do now makes pkg-config put their dependencies in the linker arguments as well, which is not what we want.

65f2d155

2015-06-25T21:49:48

List `libcurl` in the generated `libgit2.pc`

cf9d5f76

2015-06-03T04:57:00

curl: find and link with the library if it's available by default

e488bef4

2015-06-19T12:53:37

Quote LIBSSH2_LIBRARIES call Credits to @directhex It is possible for PKG_CHECK_MODULES(LIBSSH2 libssh2) to LIBSSH2_LIBRARIES to a string with more than one library in it - e.g. if your libssh2 was built against libgcrypt, it will be "ssh2;gcrypt" Quoting the string is needed, or CHECK_LIBRARY_EXISTS will fail.

1679ec12

2015-05-24T18:27:15

cmake: Add CMake check for libssh2 memory credential passing support

thodg/libgit2/CMakeLists.txt

CMakeLists.txt

Log