|
4da74c83
|
2017-10-20T07:29:17
|
|
cmake: use project-relative binary and source directories
Due to our split of CMake files into multiple modules, we had to replace
some uses of the `${CMAKE_CURRENT_SOURCE_DIR}` and
`${CMAKE_CURRENT_BINARY_DIR}` variables and replace them with
`${CMAKE_SOURCE_DIR}` and `${CMAKE_BINARY_DIR}`. This enabled us to
still be able to refer to top-level files when defining build
instructions inside of a subdirectory.
When replacing all variables, it was assumed that the absolute set of
variables is always relative to the current project. But in fact, this
is not the case, as these variables always point to the source and
binary directory as given by the top-levl project. So the change
actually broke the ability to include libgit2 directly as a subproject,
as source files cannot be found anymore.
Fix this by instead using project-specific source and binary directories
with `${libgit2_SOURCE_DIR}` and `${libgit2_BINARY_DIR}`.
|
|
8bbee8f3
|
2017-10-14T08:36:54
|
|
Fix compilation for CMake versions 3.0.x where x >= 1
Apparently policy CMP0015 was added in CMake 3.1. With CMake 3.0.2,
the build was failing with
CMake Error at CMakeLists.txt:18 (CMAKE_POLICY):
Policy "CMP0051" is not known to this version of CMake.
This patch makes it work.
|
|
8ac8c78c
|
2017-10-09T15:15:08
|
|
Merge pull request #4356 from pks-t/pks/static-clar
cmake: use static dependencies when building static libgit2
|
|
|
49551254
|
2017-09-22T09:34:37
|
|
cmake: use static dependencies when building static libgit2
CMake allows us to build a static library by simply setting the variable
`BUILD_SHARED_LIBS` to `OFF`. While this causes us to create a static
libgit2.a archive, it will not automatically cause CMake to only locate
static archives when searching for dependencies. This does no harm in
case of building our libgit2.a, as we do not want to include all
required dependencies in the resulting archive anyway. Instead, we ask
users of a static libgit2.a to link against the required set of static
archives themselves, typically aided by the libgit2.pc file.
Where it does cause harm, though, is when we build the libgit2_clar test
suite. CMake has happily populated our LIBGIT2_LIBS variable with shared
libraries, and so linking the final libgit2_clar test does not do the
right thing. It will simply ignore those shared libraries, we end up
with a test suite with undefined symbols.
To fix the issue, we can instruct CMake to only locate libraries with a
certain suffix. As static libraries are typically identifiable by their
".a" suffix on Unix-based systems, we can instruct CMake to only locate
libraries with this suffix to restrict it from finding any shared
libraries. This fixes building a static libgit2_clar test suite.
Note that this ignores the problem on Windows. The problem here is that
we cannot even distinguish static and dynamic libraries by only
inspecting their suffix. So we just ignore the problem on Windows, for
now.
|
|
|
cf9f3452
|
2017-09-06T07:38:32
|
|
cmake: bump minimum version to 2.8.11
Our current minimum CMake version is 2.8. This version does not yet
allow us to use object libraries (introduced in 2.8.8) and target
include directories (introduced in 2.8.12), which are both mechanisms we
want to use to fix some specific problems. We previously were not able
to bump our CMake version to a version supporting object libraries
because Ubuntu Precise only had CMake version 2.8.7 in its repositories.
But due to Precise being end of life now, we shouldn't need to honor it
anymore. A current survey of some of the more conservative distributions
brings up the following versions of CMake:
- CentOS 5: 2.6.2
- CentOS 6: 2.8.12.2
- Debian 7: 2.8.11
- Fedora 23: 3.3.2
- OpenSUSE 13.2: 3.0.2
- Ubuntu Precise: 2.8.7
- Ubuntu Trusty: 2.8.12
The only two outliers here are CentOS 5 and Ubuntu Precise. CentOS is
currently unsupported due to our minimum version being 2.8 and Ubuntu
Precise is not maintained anymore. So the next smallest version
supported by all major distributions is 2.8.11. While this does not yet
support target include directories, it at least enables us to use object
libraries. So this becomes our new minimum required version.
|
|
|
524c1d3c
|
2017-09-20T07:48:19
|
|
Merge pull request #4334 from pks-t/pks/reproducible-builds
Reproducible builds
|
|
|
54214d61
|
2017-09-15T10:28:32
|
|
cmake: fix linker error with dbghelper library
When the MSVC_CRTDBG option is set by the developer, we will link in the
dbghelper library to enable memory lead detection in MSVC projects. We
are doing so by adding it to the variable `CMAKE_C_STANDARD_LIBRARIES`,
so that it is linked for every library and executable built by CMake.
But this causes our builds to fail with a linker error:
```
LINK: fatal error LNK1104: cannot open file 'advapi32.lib;Dbghelp.lib'
```
The issue here is that we are treating the variable as if it were an
array of libraries by setting it via the following command:
```
SET(CMAKE_C_STANDARD_LIBRARIES "${CMAKE_C_STANDARD_LIBRARIES}"
"Dbghelp.lib")
```
The generated build commands will then simply stringify the variable,
concatenating all the contained libraries with a ";". This causes the
observed linking failure.
To fix the issue, we should just treat the variabable as a simple
string. So instead of adding multiple members, we just add the
"Dbghelp.lib" library to the existing string, separated by a space
character.
|
|
|
d630887b
|
2017-08-30T21:47:12
|
|
cmake: enable reproducible static linking
By default, both ar(1) and ranlib(1) will insert additional information
like timestamps into generated static archives and indices. As a
consequence, generated static archives are not deterministic when
created with default parameters.
Both programs do support a deterministic mode, which will simply zero
out undeterministic information with `ar D` and `ranlib -D`.
Unfortunately, CMake does not provide an easy knob to add these command
line parameters. Instead, we have to redefine the complete command
definitons stored in the variables CMAKE_C_ARCHIVE_CREATE,
CMAKE_C_ARCHIVE_APPEND and CMAKE_C_ARCHIVE_FINISH.
Introduce a new build option `ENABLE_REPRODUCIBLE_BUILDS`. This option
is available on Unix-like systems with the exception of macOS, which
does not have support for the required flags. If the option is being
enabled, we add those flags to the invocation of both `ar` and `ranlib`
to enable deterministically building the static archive.
|
|
|
175ab8e7
|
2017-08-25T17:36:24
|
|
cmake: add switch to build with -Werror
Add a simple switch to enable building with "-Werror=<warning>" instead
of "-W<warning". Due to the encapsulated `ENABLE_WARNINGS` macro, this
is as simple as adding a new variable "ENABLE_WERROR`, which can be
passed on the command line via `-DENABLE_WERROR=ON`. The variable
defaults to NO to not bother developers in their day to day work.
|
|
|
4a46a8c1
|
2017-08-25T17:32:54
|
|
cmake: encapsulate enabling/disabling compiler warnings
There are multiple sites where we enable or disable compiler warning via
"-W<warning>" or "-Wno-<warning>". As we want to extend this mechanism
later on to conditionally switch these over to "-Werror=<warning>", we
encapsulate the logic into its their own macros `ENABLE_WARNINGS` and
`DISABLE_WARNINGS`.
Note that we in fact have to use a macro here. Using a function would
not modify the CFLAGS inside of the callers scope, but in the function's
scope only.
|
|
|
e5c9723d
|
2017-06-30T18:12:02
|
|
cmake: move library build instructions into subdirectory
To fix leaking build instructions into different targets and to make
the build instructions easier to handle, create a new CMakeLists.txt
file containing build instructions for the libgit2 target.
By now, the split is rather easy to achieve. Due to the preparatory
steps, we can now simply move over all related build instructions, only
needing to remove the "src/" prefix from some files.
|
|
|
72f27cb6
|
2017-06-30T17:02:00
|
|
cmake: fix up source and binary directory paths
There are quite some uses of the variables "${CMAKE_CURRENT_SOURCE_DIR}"
and "${CMAKE_CURRENT_BINARY_DIR}" where they are not appropriate.
Convert these sites to instead use the variables "${CMAKE_SOURCE_DIR}"
and "${CMAKE_BINARY_DIR}", which instead point to the project's root
directory.
This will ease splitting up the library build instructions into its own
subdirectory.
|
|
|
1f43a43d
|
2017-06-28T13:28:33
|
|
cmake: move zlib build instructions into subdirectory
Extract code required to build the zlib library into its own
CMakeLists.txt, which is included as required.
|
|
|
b7514554
|
2017-06-28T13:25:09
|
|
cmake: move http-parser build instructions into subdirectory
Extract code required to build the http-parser library into its own
CMakeLists.txt, which is included as required.
|
|
|
9e449e52
|
2017-06-28T13:23:45
|
|
cmake: move regex build instructions into subdirectory
Extract code required to build the regex library into its own
CMakeLists.txt, which is included as required.
|
|
|
43248500
|
2017-06-28T13:21:09
|
|
cmake: move winhttp build instructions into subdirectory
Extract code required to build the winhttp library into its own
CMakeLists.txt, which is included as required.
|
|
|
bed7ca3a
|
2017-06-30T16:57:16
|
|
cmake: define WIN_RC with other platform sources
This makes splitting up the library build instructions later on more
obvious and easier to achieve.
|
|
|
8ee90c39
|
2017-06-28T13:16:38
|
|
cmake: find dependencies after setting build flags
This makes splitting up the library build instructions later on more
obvious and easier to achieve.
|
|
|
c3635130
|
2017-06-28T13:14:23
|
|
cmake: move definition of Win32 flags together
This makes splitting up the library build instructions later on more
obvious and easier to achieve.
|
|
|
32a2e500
|
2017-07-01T13:41:36
|
|
cmake: inline TARGET_OS_LIBRARIES function
Previous to keeping track of libraries and linking directories via
variables, we had two call sites of the `TARGET_OS_LIBRARIES` function
to avoid duplicating knowledge on required operating system library
dependencies. But as the libgit2_clar target now re-uses defined
variables to link against these libraries, we can simply inline the
function.
|
|
|
8e31cc25
|
2017-06-28T12:51:14
|
|
cmake: keep track of libraries and includes via lists
Later on, we will move detection of required libraries, library
directories as well as include directories into a separate
CMakeLists.txt file inside of the source directory. Obviously, we want
to avoid duplication here regarding these parameters.
To prepare for the split, put the parameters into three variables
LIBGIT2_LIBS, LIBGIT2_LIBDIRS and LIBGIT2_INCLUDES, tracking the
required libraries, linking directory as well as include directories.
These variables can later be exported into the parent scope from inside
of the source build instructions, making them readily available for the
other subdirectories.
|
|
|
dd332e2a
|
2017-06-23T20:42:41
|
|
cmake: use absolute path to deps
When refering to files and directories inside of the top-level "deps/"
directory, we're being inconsistent in using relative or absolute paths.
To enable splitting out parts of the top-level CMakeLists.txt into an
own file in the "src/" directory, consistently switch over to use
absolute paths to avoid errors when converting.
|
|
|
8341d6cf
|
2017-07-04T10:57:28
|
|
cmake: move regcomp and futimens checks to "features.h"
In our CMakeLists.txt, we have to check multiple functions in order to
determine if we have to use our own or whether we can use the
platform-provided one. For two of these functions, namely `regcomp_l()`
and `futimens`, the defined macro is actually used inside of the header
file "src/unix/posix.h". As such, these macros are not only required by
the library, but also by our test suite, which is makes use of internal
headers.
To prepare for the CMakeLists.txt split, move these two defines inside
of the "features.h" header.
|
|
|
a390a846
|
2017-07-01T13:06:00
|
|
cmake: move defines into "features.h" header
In a future commit, we will split out the build instructions for our
library directory and move them into a subdirectory. One of the benefits
is fixing scoping issues, where e.g. defines do not leak to build
targets where they do not belong to. But unfortunately, this does also
pose the problem of how to propagate some defines which are required by
both the library and the test suite.
One way would be to create another variable keeping track of all added
defines and declare it inside of the parent scope. While this is the
most obvious and simplest way of going ahead, it is kind of unfortunate.
The main reason to not use this is that these defines become implicit
dependencies between the build targets. By simply observing a define
inside of the CMakeLists.txt file, one cannot reason whether this define
is only required by the current target or whether it is required by
different targets, as well.
Another approach would be to use an internal header file keeping track
of all defines shared between targets. While configuring the library, we
will set various variables and let CMake configure the file, adding or
removing defines based on what has been configured. Like this, one can
easily keep track of the current environment by simply inspecting the
header file. Furthermore, these dependencies are becoming clear inside
the CMakeLists.txt, as instead of simply adding a define, we now call
e.g. `SET(GIT_THREADSAFE 1)`.
Having this header file though requires us to make sure it is always
included before any "#ifdef"-preprocessor checks are executed. As we
have already refactored code to always include the "common.h" header
file before any statement inside of a file, this becomes easy: just make
sure "common.h" includes the new "features.h" header file first.
|
|
|
35087f0e
|
2017-06-28T15:42:54
|
|
cmake: create separate CMakeLists.txt for tests
Our CMakeLists.txt is very unwieldy in its current size, spanning more
than 700 lines of code. Furthermore, it has several issues regarding
scoping, where for example some defines, includes, etc. from our test
suite are also applied to our normal library code.
To fix this, we can separate out build instructions for our tests and
move them into their own CMakeLists.txt in the "tests" directory. This
reduced complexity of the root CMakeLists.txt file and fixes the issues
regarding leaking build context from tests into the library.
|
|
|
3267115f
|
2017-06-28T15:41:15
|
|
cmake: create own precompiled headers for tests
As soon as we split up our CMakeBuild.txt build instructions, we will be
unable to simply link against the git2 library's precompiled header from
other targets. To avoid this future breakage, create a new precompiled
header for our test suite. Next to being compatible with the split, this
enables us to also include additional files like the clar headers, which
may help speeding up compilation of the test suite.
|
|
|
caab8270
|
2017-06-23T19:07:01
|
|
cmake: create object library target
Currently, we're compiling our library code twice, once as part of the
libgit2 library and once for the libgit2_clar executable. Since CMake
2.8.8, there exists a new library type OBJECT, which represents an
intermediate target which can then subsequently be used when linking
several targets against the same set of objects.
Use an OBJECT library to create an internal library for linking. This
new target is only used on CMake v2.8.8 or newer. As CMake 3.0 changed
the way how generator expressions are evaluated when accessing
properties, we need to enable CMake policy 0051 to keep
`IDE_SPLIT_SOURCES` functioning.
|
|
|
f33911e5
|
2017-06-23T18:32:48
|
|
cmake: remove unused variable "CLAR_RESOURCES"
Once upon a time, the `CLAR_RESOURCES` variable was intended to set
the `CLAR_RESOURCES` define. But actually, the define uses a wrong
variable name by accident, hinting that its value cannot actually be
used at all, as it is empty. Searching through the code base confirms
the guess that the define is not used at all.
Remove both the variable and definition.
|
|
|
096a49c0
|
2017-07-03T08:45:57
|
|
cmake: try to detect threads library
While we already make use of the variable `${CMAKE_THREAD_LIBS_INIT}`,
it is actually undefined due to us never including the "FindThreads"
module in the CMakeLists.txt. It is rather curious as to why this has
never triggered any error up to now, but it does in fact result in
linking errors on some Unix platforms as soon as we split up our build
instructions into multiple files.
Fix the issue now to avoid future breakage by including the
"FindThreads" module.
|
|
|
56893bb9
|
2017-06-28T12:11:44
|
|
cmake: consistently use TARGET_INCLUDE_DIRECTORIES if available
Instead of using INCLUDE_DIRECTORIES again for the libgit2_clar test
suite, we should just be using TARGET_INCLUDE_DIRECTORIES again if the
CMake version is greater than 2.8.11.
|
|
22de81e6
|
2017-06-21T08:25:36
|
|
cmake: use `target_include_directories` for modern cmake
Apply `target_include_directories` when CMAKE_VERSION >= 2.8.12
|
|
|
6b2133b4
|
2017-06-27T12:46:15
|
|
Merge pull request #4235 from pks-t/pks/out-of-tree-builds
Out of tree builds
|
|
|
4305fcca
|
2017-05-10T12:14:36
|
|
cmake: generate clar.suite in binary directory
Change the output path of generate.py to generate the clar.suite file
inside of the binary directory. This fixes out of tree builds with
read-only source trees as we now refrain from writing anything into the
source tree.
|
|
845f661d
|
2017-06-21T20:02:48
|
|
cmake: Permit disabling external http-parser
When attempting to build libgit2 as an isolated static lib, CMake
gleefully attempts to use the system http-parser. This is typically
seen on Linux systems which install header files with every package,
such as Gentoo.
Allow developers to forcibly disable using the system http-parser with
the config switch USE_EXT_HTTP_PARSER. Defaults to ON to maintain
previous behavior.
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
|
|
|
a64532e1
|
2017-06-13T11:05:09
|
|
cmake: disable optimization on debug builds
While our debug builds on MSVC platforms already tune the code optimizer
to aid debugging code, all the other platforms still use the default
optimization level. This makes it hard for developers on these platforms
to actually debug code while maintaining his sanity due to optimizations
like inlined code, elided variables etc.
To help this common use case, we can simply follow the MSVC example and
turn off code optimization with "-O0" for debug builds. While it would
be preferable to instead use "-Og" supported by more modern compilers,
we cannot guarantee that this level is available on all supported
platforms.
|
|
|
61399953
|
2017-06-13T11:03:38
|
|
cmake: set "-D_DEBUG" on non-Windows platforms
In our code base, we have some occasions where we use the "_DEBUG"
preprocessor macro to enable additional code which should not be part of
release builds. While we define this flag on MSVC platforms, it is
guarded by the conditional `WIN32 AND NOT CYGWIN` on other platforms
since 19be3f9e6 (Improve MSVC compiler, linker flags, 2013-02-13). While
this condition can be fulfilled by the MSVC platform, it is never
encountered due to being part of the `ELSE` part of `IF (MSVC)`.
The intention of the conditional was most likely to avoid the
preprocessor macro on Cygwin platforms, but to include it on everthing
else. As such, the correct condition here would be `IF (NOT CYGWIN)`
instead. But digging a bit further, the condition is only ever used in
two places:
1. To skip the test in "core::structinit", which should also work on
Cygwin.
2. In "src/win32/git2.rc", where it is used to set additional file
flags. As this file is included in MSVC builds only, it cannot cause
any harm to set "_DEBUG" on Cygwin here.
As such, we can simply drop the conditional and always set "-D_DEBUG" on
all platforms.
|
|
|
e94be4c0
|
2017-06-13T11:08:19
|
|
cmake: remove stale comment on precompiled headers
In commit 9f75a9ce7 (Turning on runtime checks when building debug under
MSVC., 2012-03-30), we introduced a comment "Precompiled headers", which
actually refers to no related commands. Seeing that the comment never
had anything to refer to, we can simply remove it here.
|
|
|
db1abffa
|
2017-06-07T14:59:38
|
|
sha1dc: do not use standard includes
The updated SHA1DC library allows us to use custom includes instead of
using standard includes. Due to requirements with cross-platform, we
provide some custom system includes files like for example the
"stdint.h" file on Win32. Because of this, we want to make sure to avoid
breaking cross-platform compatibility when SHA1DC is enabled.
To use the new mechanism, we can simply define
`SHA1DC_NO_STANDARD_INCLUDES`. Furthermore, we can specify custom
include files via two defines, which we now use to include our
"common.h" header.
|
|
|
f218508f
|
2017-06-07T10:54:48
|
|
ctest: temporarily disable UNC path tests
(Temporarily) disable UNC path tests to work around AppVeyor issues.
|
|
|
a4de1ae3
|
2017-04-25T10:14:19
|
|
cmake: define GIT_HTTPS when HTTPS is supported
|
|
9f128d2a
|
2017-03-02T20:56:47
|
|
cmake: drop unset `SHA1_TYPE`
We never set `SHA1_TYPE` to `builtin`. Don't bother testing for it.
|
|
|
2dfd1294
|
2017-02-24T13:34:01
|
|
hash: include sha1collisiondetection
Include the SHA1 collision attack detection library from
https://github.com/cr-marcstevens/sha1collisiondetection
|
|
|
a371a8ae
|
2017-02-24T13:03:15
|
|
hash: rename implementation selection constants
|
|
|
a02e8a38
|
2017-03-01T13:58:15
|
|
cmake: only enable supported compiler warning flags
We currently unconditionally enable the "-Wall" and "-Wextra" flags.
Some platforms rely on compilers which do not support these flags,
though. One of these platforms is Haiku, which does not support
"-Wextra" due to being stuck on GCC version 2.
Fix builds on such platforms by adding these flags only if supported by
the compiler.
|
|
e56e4c76
|
2016-12-30T17:59:47
|
|
CMakeLists: Move `http-parser` block down by `zlib`, update error message
|
|
|
236a690c
|
2016-11-20T22:46:01
|
|
Allow Windows with WinHTTP to use external http-parser
|
|
36117978
|
2016-10-06T18:30:30
|
|
Fix the existence check for `regcomp_l`.
`xlocale.h` only defines `regcomp_l` if `regex.h` was included as well.
Also change the test cases to actually test `p_regcomp` works with
a multibyte locale.
|
|
|
ab96ca55
|
2016-10-06T13:15:31
|
|
Make sure we use the `C` locale for `regcomp` on macOS.
|
|
|
528b2f7d
|
2016-09-05T13:24:07
|
|
cmake: add curl library path
The `PKG_CHECK_MODULES` function searches a pkg-config module and
then proceeds to set various variables containing information on
how to link to the library. In contrast to the `FIND_PACKAGE`
function, the library path set by `PKG_CHECK_MODULES` will not
necessarily contain linking instructions with a complete path to
the library, though. So when a library is not installed in a
standard location, the linker might later fail due to being
unable to locate it.
While we already honor this when configuring libssh2 by adding
`LIBSSH2_LIBRARY_DIRS` to the link directories, we fail to do so
for libcurl, preventing us to build libgit2 on e.g. FreeBSD. Fix
the issue by adding the curl library directory to the linker
search path.
|
|
|
b6a2fd0e
|
2016-06-20T11:09:49
|
|
cmake: do not use -fPIC for MSYS2
The MSYS2 build system automatically compiles all code with position-independent
code. When we manually add the -fPIC flag to the compiler flags, MSYS2 will
loudly complain about PIC being the default and thus not required.
Fix the annoyance by stripping -fPIC in MSYS2 enviroments like it is already
done for MinGW.
|
|
|
0aaba445
|
2016-06-01T11:33:58
|
|
Merge pull request #3796 from mmuman/haiku
Preliminary Haiku port
|
|
13b0b7d5
|
2016-05-27T10:20:35
|
|
Update CMakeLists.txt
typo fix
|
|
d94f5037
|
2016-05-22T23:23:58
|
|
CMakeLists: Add libnetwork for Haiku
|
|
|
097b0761
|
2016-04-29T10:18:04
|
|
cmake: include threading libraries in pkg-config
Include any required threading libraries in our `libgit2.pc`.
|
|
b8353236
|
2016-04-19T10:50:30
|
|
CI: run proxy tests with ctest
Running clar directly on appveyor makes it think the command returned
failure, so it stops the tests. Running it via ctest lets it go through.
|
|
035430b7
|
2016-03-24T14:10:29
|
|
CMakeLists: Further improve the error messages regarding CMAKE_SIZEOF_VOID_P
|
|
|
f9601e6f
|
2016-03-23T20:37:39
|
|
CMakeLists: Show the pointer size for an unsupported architecture
Showing the pointer size gives a hint as to why we think this is an
unsupported architecture.
|
|
|
3a43677e
|
2016-03-18T06:37:04
|
|
Merge pull request #3660 from mstrap/mingw
MinGW builds should optionally create DLLs without "lib" prefix
|
|
059f33bf
|
2016-03-15T18:32:37
|
|
Option "LIBGIT2_PREFIX" to set the CMAKE's TARGET_PROPERTIES PREFIX
This is especially useful in combination with MinGW to yield the
Windows-compliant DLL name "git2.dll" instead of "libgit2.dll"
|
|
|
08f030ce
|
2016-03-15T18:20:32
|
|
CMake: do not overwrite but only append to CMAKE_C_FLAGS_DEBUG
This is useful to force "smart" IDEs (like CLIon) to use debug
flag -g even it may have decided that "-D_DEBUG" (which is
already present) is sufficient.
|
|
|
2d880712
|
2016-03-03T15:08:12
|
|
Enable nanosecond resolution by default
Nanosecond resolution is now the default in git itself. Enable this
as our default as well.
|
|
|
ba9bb664
|
2016-03-03T19:21:07
|
|
tests: create a ctest target for cred_callback
|
|
|
6cc4bac8
|
2016-02-28T11:31:10
|
|
Merge pull request #3577 from rossdylan/rossdylan/pooldebug
Add a new build flag to disable the pool allocator
|
|
|
3d6a42d1
|
2016-02-25T11:23:19
|
|
nsec: support NDK's crazy nanoseconds
Android NDK does not have a `struct timespec` in its `struct stat`
for nanosecond support, instead it has a single nanosecond member inside
the struct stat itself. We will use that and use a macro to expand to
the `st_mtim` / `st_mtimespec` definition on other systems (much like
the existing `st_mtime` backcompat definition).
|
|
ed0571f8
|
2016-01-12T16:08:38
|
|
Add a new build flag to disable the pool allocator and pass all git_pool_malloc calls straight to git__malloc
|
|
8a0133c0
|
2016-01-05T19:07:27
|
|
Add winhttp dependencies to pc file.
|
|
|
0878ca9b
|
2015-10-07T10:31:07
|
|
CMakeLists: Compare CMAKE_SIZEOF_VOID_P as a number, not as a string
|
|
eb11fac6
|
2015-11-20T18:57:13
|
|
Detect stat's structure
|
|
|
75a0ccf5
|
2015-11-12T19:53:09
|
|
Merge pull request #3170 from CmdrMoozy/nsec_fix
git_index_entry__init_from_stat: set nsec fields in entry stats
|
|
|
7208ff4d
|
2015-10-22T20:17:19
|
|
cmake: split sources into original paths for Xcode and MSVC
The MSVC_SPLIT_SOURCES function is helpful for other IDEs, like Xcode,
and will split the source files up into their target directories,
instead of merely placing them all in a "Sources" directory.
Rename MSVC_SPLIT_SOURCES to IDE_SPLIT_SOURCES and enable it for Xcode.
|
|
|
ac7e50dd
|
2015-10-14T08:30:51
|
|
Merge pull request #3453 from libgit2/cmn/warn-python
CMake: be more explicit with python errors
|
|
|
e3f94c71
|
2015-10-06T13:35:45
|
|
CMake: be more explicit with python errors
There's been a few reports of users not understanding what the python
error means, so spell out the options they have.
|
|
c7b17fb5
|
2015-10-01T18:01:32
|
|
Merge branch 'master' into nsec_fix_next
|
|
|
ba1a5553
|
2015-09-30T17:44:10
|
|
Merge pull request #3446 from ethomson/portability
portability: use `CHECK_FUNCTION_EXISTS` for checking whether functions exist...
|
|
|
e683d152
|
2015-09-30T05:49:04
|
|
qsort_r/qsort_s: detect their support
|
|
|
8649dfd8
|
2015-09-29T13:36:37
|
|
p_futimes: support using futimens when available
|
|
|
360dd4da
|
2015-06-23T10:02:48
|
|
win32: define our own POSIX struct stat, and support USE_NSEC
|
|
|
c963fe1d
|
2015-06-23T09:05:49
|
|
cmake: fix CMake code organization problem
|
|
|
e9e6df2c
|
2015-06-15T09:28:55
|
|
cmake: Only provide USE_NSEC if struct stat members are avilable.
This allows us to remove OS checks from source code, instead relying
on CMake to detect whether or not `struct stat` has the nanoseconds
members we rely on.
|
|
|
e7de893e
|
2015-06-01T13:43:54
|
|
cmake: add USE_NSEC, and only check nanosec m/ctime if enabled
|
|
5540d9db
|
2015-09-10T16:11:10
|
|
pkg-config: fix directory references in libgit2.pc
Before:
libdir=/usr//usr/lib64
includedir=/usr//usr/include
After:
libdir=/usr/lib64
includedir=/usr/include
(note the duplication of /usr in the before case)
|
|
|
01fe8374
|
2015-09-03T13:35:15
|
|
Revert "Get rid of libssh2 embedding"
The embedding was removed as a libssh2 release with Windows crypto
support became available, but dependencies are still annoying so this
ahs been requested again.
This reverts commit 20dcb7315cd4c5760c68402998fd9e5a6bf5505d.
|
|
|
b445940e
|
2015-08-19T12:53:31
|
|
CMake: fall back to OpenSSL on older OS X
Starting at OS X 10.8, the Security framework offers some functions
which are unified across OS X and iOS. These are the functions that we
use.
Older versions of OS X do not have these functions and we fail to
compile. In these situations, fall back to using OpenSSL for our TLS
stream instead.
|
|
c27b4afc
|
2015-08-06T11:06:17
|
|
Forcing libssh2 lib location
OS X may have libssh2 in diff locations, so CHECK_LIBRARY_EXISTS may check the wrong lib; forcing it to use a found directory.
|
|
2da64edb
|
2015-07-27T18:28:29
|
|
Add -Wdocumentation flag if supported
|
|
|
a522d8c1
|
2015-07-11T17:35:59
|
|
Merge pull request #3292 from tkelman/patch-1
Increase required version of cmake to 2.8
|
|
37c84dc5
|
2015-07-05T10:07:48
|
|
Increase required version of cmake to 2.8
|
|
93b42728
|
2015-06-09T14:38:30
|
|
Include stacktrace summary in memory leak output.
|
|
|
fd2d11a1
|
2015-06-28T13:57:06
|
|
CMake: treat the ld flags as a list
These are treated as a list by CMake itself, which means that treating
them as a simple string can put semicolons in our ld command-line if we
have libraries which are not installed on the standard locations.
Treat the variable as a CMake list and replace it with the space-delimited
list just before writing it out to our pc file.
|
|
|
790cabf0
|
2015-06-26T13:51:41
|
|
pc: Put libcurl and libssh2 in Libs.private
Pass on to whoever wants to link to libgit2 statically the flags that we
would have used for these libraries.
Putting them in Requires.private as we do now makes pkg-config put their
dependencies in the linker arguments as well, which is not what we want.
|
|
65f2d155
|
2015-06-25T21:49:48
|
|
List `libcurl` in the generated `libgit2.pc`
|
|
|
cf9d5f76
|
2015-06-03T04:57:00
|
|
curl: find and link with the library if it's available by default
|
|
e488bef4
|
2015-06-19T12:53:37
|
|
Quote LIBSSH2_LIBRARIES call
Credits to @directhex
It is possible for PKG_CHECK_MODULES(LIBSSH2 libssh2) to LIBSSH2_LIBRARIES to a string with more than one library in it - e.g. if your libssh2 was built against libgcrypt, it will be "ssh2;gcrypt"
Quoting the string is needed, or CHECK_LIBRARY_EXISTS will fail.
|
|
1679ec12
|
2015-05-24T18:27:15
|
|
cmake: Add CMake check for libssh2 memory credential passing support
|
|
|
20dcb731
|
2015-05-12T11:33:45
|
|
Get rid of libssh2 embedding
It was added as a workaround while the project had code to use WinCNG
but had not made a release with it. There is now a release of libssh2
with WinCNG support, so this option is redundant. Let's get rid of it
before people start liking it too much.
|
|
|
25f355cb
|
2015-05-06T18:39:39
|
|
Merge pull request #3086 from yongthecoder/master
Android build doesn't need deps/regex
|
|
|
7a5c7559
|
2015-05-05T22:36:24
|
|
Ensure frameworks are mentioned in libgit2.pc
When building on Mac OS X, the `CoreFoundation` and `Security` frameworks where missing from `Libs.private` in the generated `libgit2.pc` file.
|
|
57aa839c
|
2015-05-04T09:41:34
|
|
Android build doesn't need deps/regex
deps/regex was included in Android build because Android NDK 4 has
a packaging bug and doesn't have the regular expression functions defined
in its libc.so. The bug has been fixed in subsequent Android NDK releases.
If it is still necessary to work around the bug in Android NDK 4, we
should consider to use an option like ANDROID_NDK_RELEASE or
ANDROID_NDK_RELEASE_NUM.
|
|
|
24e53d2f
|
2015-03-19T09:55:20
|
|
Rename GIT_SSL to GIT_OPENSSL
This is what it's meant all along, but now we actually have multiple
implementations, it's clearer to use the name of the library.
|
|
|
6bb54cbf
|
2014-11-02T13:23:32
|
|
Add a SecureTransport TLS channel
As an alternative to OpenSSL when we're on OS X. This one can actually
take advantage of stacking the streams.
|