|
ff6f6754
|
2021-01-07T05:44:16
|
|
Use `p_pwrite`/`p_pread` consistently throughout the codebase
This change stops using the seek+read/write combo to perform I/O with an
offset, since this is faster by one system call (and also more atomic
and therefore safer).
|
|
4ce8e01a
|
2020-06-17T14:31:11
|
|
Support build with NO_MMAP to disable use of system mmap
* Use pread/pwrite to avoid updating position in file descriptor
* Emulate missing pread/pwrite on win32 using overlapped file IO
|
|
|
322c15ee
|
2020-08-01T18:24:41
|
|
Make the pack and mwindow implementations data-race-free
This change fixes a packfile heap corruption that can happen when
interacting with multiple packfiles concurrently across multiple
threads. This is exacerbated by setting a lower mwindow open file limit.
This change:
* Renames most of the internal methods in pack.c to clearly indicate
that they expect to be called with a certain lock held, making
reasoning about the state of locks a bit easier.
* Splits the `git_pack_file` lock in two: the one in `git_pack_file`
only protects the `index_map`. The protection to `git_mwindow_file` is
now in that struct.
* Explicitly checks for freshness of the `git_pack_file` in
`git_packfile_unpack_header`: this allows the mwindow implementation
to close files whenever there is enough cache pressure, and
`git_packfile_unpack_header` will reopen the packfile if needed.
* After a call to `p_munmap()`, the `data` and `len` fields are poisoned
with `NULL` to make use-after-frees more evident and crash rather than
being open to the possibility of heap corruption.
* Adds a test case to prevent this from regressing in the future.
Fixes: #5591
|
|
7cd0bf65
|
2020-04-05T18:26:52
|
|
pack: use GIT_ASSERT
|
|
|
a3e8b7cd
|
2020-04-05T17:18:20
|
|
mwindow: use GIT_ASSERT
|
|
|
cd2fe662
|
2020-04-05T16:56:55
|
|
indexer: use GIT_ASSERT
|
|
|
3a197ea7
|
2020-06-27T12:33:32
|
|
Make the tests pass cleanly with MemorySanitizer
This change:
* Initializes a few variables that were being read before being
initialized.
* Includes https://github.com/madler/zlib/pull/393. As such,
it only works reliably with `-DUSE_BUNDLED_ZLIB=ON`.
|
|
c6184f0c
|
2020-06-08T21:07:36
|
|
tree-wide: do not compile deprecated functions with hard deprecation
When compiling libgit2 with -DDEPRECATE_HARD, we add a preprocessor
definition `GIT_DEPRECATE_HARD` which causes the "git2/deprecated.h"
header to be empty. As a result, no function declarations are made
available to callers, but the implementations are still available to
link against. This has the problem that function declarations also
aren't visible to the implementations, meaning that the symbol's
visibility will not be set up correctly. As a result, the resulting
library may not expose those deprecated symbols at all on some platforms
and thus cause linking errors.
Fix the issue by conditionally compiling deprecated functions, only.
While it becomes impossible to link against such a library in case one
uses deprecated functions, distributors of libgit2 aren't expected to
pass -DDEPRECATE_HARD anyway. Instead, users of libgit2 should manually
define GIT_DEPRECATE_HARD to hide deprecated functions. Using "real"
hard deprecation still makes sense in the context of CI to test we don't
use deprecated symbols ourselves and in case a dependant uses libgit2 in
a vendored way and knows it won't ever use any of the deprecated symbols
anyway.
|
|
|
ba59a4a2
|
2020-04-01T12:34:16
|
|
Making get_delta_base() conform to the general error-handling pattern
This makes get_delta_base() return the error code as the return value
and the delta base as an out-parameter.
|
|
|
90450d88
|
2020-02-07T12:10:12
|
|
indexer: check return code of `git_hash_ctx_init`
Initialization of the hashing context may fail on some systems, most
notably on Win32 via the legacy hashing context. As such, we need to
always check the error code of `git_hash_ctx_init`, which is not done
when creating a new indexer.
Fix the issue by adding checks.
|
|
|
6460e8ab
|
2019-06-23T18:13:29
|
|
internal: use off64_t instead of git_off_t
Prefer `off64_t` internally.
|
|
|
a477bff1
|
2019-08-08T10:44:57
|
|
indexer: catch OOM when adding expected OIDs
When adding OIDs to the indexer's map of yet-to-be-seen OIDs to verify
that packfiles are complete, we do so by first allocating a new OID and
then calling `git_oidmap_set` on it. There was no check for memory
allocation errors in place, though, leading to possible segfaults due to
trying to copy data to a `NULL` pointer.
Verify the result of `git__malloc` with `GIT_ERROR_CHECK_ALLOC` to fix
the issue.
|
|
|
0b5ba0d7
|
2019-06-06T16:36:23
|
|
Rename opt init functions to `options_init`
In libgit2 nomenclature, when we need to verb a direct object, we name
a function `git_directobject_verb`. Thus, if we need to init an options
structure named `git_foo_options`, then the name of the function that
does that should be `git_foo_options_init`.
The previous names of `git_foo_init_options` is close - it _sounds_ as
if it's initializing the options of a `foo`, but in fact
`git_foo_options` is its own noun that should be respected.
Deprecate the old names; they'll now call directly to the new ones.
|
|
|
a1ef995d
|
2019-02-21T10:33:30
|
|
indexer: use git_indexer_progress throughout
Update internal usage of `git_transfer_progress` to
`git_indexer_progreses`.
|
|
|
c976b4f9
|
2018-12-01T10:18:26
|
|
indexer: use map iterator to delete expected OIDs
To compute whether there are objects missing in a packfile, the indexer keeps
around a map of OIDs that it still expects to see. This map does not store any
values at all, but in fact the keys are owned by the map itself. Right now, we
free these keys by iterating over the map and freeing the key itself, which is
kind of awkward as keys are expected to be constant.
We can make this a bit prettier by inserting the OID as value, too. As we
already store the `NULL` pointer either way, this does not increase memory
usage, but makes the code a tad more clear. Furthermore, we convert the
previously existing map iteration via indices to make use of an iterator,
instead.
|
|
|
2e0a3048
|
2019-01-23T10:48:55
|
|
oidmap: introduce high-level setter for key/value pairs
Currently, one would use either `git_oidmap_insert` to insert key/value pairs
into a map or `git_oidmap_put` to insert a key only. These function have
historically been macros, which is why their syntax is kind of weird: instead of
returning an error code directly, they instead have to be passed a pointer to
where the return value shall be stored. This does not match libgit2's common
idiom of directly returning error codes.Furthermore, `git_oidmap_put` is tightly
coupled with implementation details of the map as it exposes the index of
inserted entries.
Introduce a new function `git_oidmap_set`, which takes as parameters the map,
key and value and directly returns an error code. Convert all trivial callers of
`git_oidmap_insert` and `git_oidmap_put` to make use of it.
|
|
|
351eeff3
|
2019-01-23T10:42:46
|
|
maps: use uniform lifecycle management functions
Currently, the lifecycle functions for maps (allocation, deallocation, resize)
are not named in a uniform way and do not have a uniform function signature.
Rename the functions to fix that, and stick to libgit2's naming scheme of saying
`git_foo_new`. This results in the following new interface for allocation:
- `int git_<t>map_new(git_<t>map **out)` to allocate a new map, returning an
error code if we ran out of memory
- `void git_<t>map_free(git_<t>map *map)` to free a map
- `void git_<t>map_clear(git<t>map *map)` to remove all entries from a map
This commit also fixes all existing callers.
|
|
|
f673e232
|
2018-12-27T13:47:34
|
|
git_error: use new names in internal APIs and usage
Move to the `git_error` name in the internal API for error-related
functions.
|
|
|
168fe39b
|
2018-11-28T14:26:57
|
|
object_type: use new enumeration names
Use the new object_type enumeration names within the codebase.
|
|
|
852bc9f4
|
2018-11-23T19:26:24
|
|
khash: remove intricate knowledge of khash types
Instead of using the `khiter_t`, `git_strmap_iter` and `khint_t` types,
simply use `size_t` instead. This decouples code from the khash stuff
and makes it possible to move the khash includes into the implementation
files.
|
|
|
50186ce8
|
2018-08-26T11:26:45
|
|
Merge pull request #4374 from pks-t/pks/pack-file-verify
Pack file verification
|
|
32810348
|
2018-07-20T08:43:54
|
|
Use UINT32_MAX as the default object limit
This replicates the old behavior of limiting to 2³² by default.
|
|
|
bfe34242
|
2018-07-16T03:12:01
|
|
See if this fixes 32-bit build
|
|
|
efe3f37d
|
2018-07-12T04:20:15
|
|
Add a git_libgit2_opts option to set the max indexer object count
|
|
|
912c59c9
|
2018-06-24T06:51:08
|
|
while fuzzing, limit # objects read
|
|
|
6b51f380
|
2018-06-22T13:19:31
|
|
indexer: correctly initialize struct with {0}
|
|
|
5ec4aee9
|
2017-11-12T10:35:18
|
|
indexer: add ability to select connectivity checks
Right now, we simply turn on connectivity checks in the indexer as soon
as we have access to an object database. But seeing that the
connectivity checks may incur additional overhead, we do want the user
to decide for himself whether he wants to allow those checks.
Furthermore, it might also be desirable to check connectivity in case
where no object database is given at all, e.g. in case where a fully
connected pack file is expected.
Add a flag `verify` to `git_indexer_options` to enable additional
verification checks. Also avoid to query the ODB in case none is given
to allow users to enable checks when they do not have an ODB.
|
|
|
c16556aa
|
2017-11-12T10:31:48
|
|
indexer: introduce options struct to `git_indexer_new`
We strive to keep an options structure to many functions to be able to
extend options in the future without breaking the API. `git_indexer_new`
doesn't have one right now, but we want to be able to add an option
for enabling strict packfile verification.
Add a new `git_indexer_options` structure and adjust callers to use
that.
|
|
|
a616fb16
|
2017-10-13T13:53:05
|
|
indexer: check pack file connectivity
When passing `--strict` to `git-unpack-objects`, core git will verify
the pack file that is currently being read. In addition to the typical
checksum verification, this will especially cause it to verify object
connectivity of the received pack file. So it checks, for every received
object, if all the objects it references are either part of the local
object database or part of the pack file. In libgit2, we currently have
no such mechanism, which leaves us unable to verify received pack files
prior to writing them into our local object database.
This commit introduce the concept of `expected_oids` to the indexer.
When pack file verification is turned on by a new flag, the indexer will
try to parse each received object first. If the object has any links to
other objects, it will check if those links are already satisfied by
known objects either part of the object database or objects it has
already seen as part of that pack file. If not, it will add them to the
list of `expected_oids`. Furthermore, the indexer will remove the
current object from the `expected_oids` if it is currently being
expected.
Like this, we are able to verify whether all object links are being
satisfied. As soon as we hit the end of the object stream and have
resolved all objects as well as deltified objects, we assert that
`expected_oids` is in fact empty. This should always be the case for a
valid pack file with full connectivity.
|
|
|
be41c384
|
2017-11-12T09:25:49
|
|
indexer: extract function reading stream objects
The loop inside of `git_indexer_append` iterates over every object that
is to be stored as part of the index. While the logic to retrieve every
object from the packfile stream is rather involved, it currently just
part of the loop, making it unnecessarily hard to follow.
Move the logic into its own function `read_stream_object`, which unpacks
a single object from the stream. Note that there is some subtletly here
involving the special error `GIT_EBUFS`, which indicates to the indexer
that no more data is currently available. So instead of returning an
error and aborting the whole loop in that case, we do have to catch that
value and return successfully to wait for more data to be read.
|
|
|
6568f374
|
2017-10-11T13:20:19
|
|
indexer: remove useless local variable
The `processed` variable local to `git_indexer_append` counts how many
objects have already been processed. But actually, whenever it gets
assigned to, we are also assigning the same value to the
`stats->indexed_objects` struct member. So in fact, it is being quite
useless due to always having the same value as the `indexer_objects`
member and makes it a bit harder to understand the code. We can just
remove the variable to fix that.
|
|
|
ecf4f33a
|
2018-02-08T11:14:48
|
|
Convert usage of `git_buf_free` to new `git_buf_dispose`
|
|
|
c8ee5270
|
2017-12-08T09:05:58
|
|
pack: rename `git_packfile_stream_free`
The function `git_packfile_stream_free` frees all state of the packfile
stream without freeing the structure itself. This naming makes it hard
to spot whether it will try to free the pointer itself or not, causing
potential future errors. Due to this reason, we have decided to name a
function freeing state without freeing the actual struture a "dispose"
function.
Rename `git_packfile_stream_free` to `git_packfile_stream_dispose` as a
first example following this rule.
|
|
|
619f61a8
|
2018-02-01T06:22:36
|
|
odb: error when we can't create object header
Return an error to the caller when we can't create an object header for
some reason (printf failure) instead of simply asserting.
|
|
|
c3514b0b
|
2017-12-23T14:59:07
|
|
Fix unpack double free
If an element has been cached, but then the call to
packfile_unpack_compressed() fails, the very next thing that happens is
that its data is freed and then the element is not removed from the
cache, which frees the data again.
This change sets obj->data to NULL to avoid the double-free. It also
stops trying to resolve deltas after two continuous failed rounds of
resolution, and adds a test for this.
|
|
|
c8aaba24
|
2017-12-06T03:03:18
|
|
libFuzzer: Fix missing trailer crash
This change fixes an invalid memory access when the trailer is missing /
corrupt.
Found using libFuzzer.
|
|
|
400caed3
|
2017-12-06T03:22:58
|
|
libFuzzer: Fix a git_packfile_stream leak
This change ensures that the git_packfile_stream object in
git_indexer_append() does not leak when the stream has errors.
Found using libFuzzer.
|
|
|
0c7f49dd
|
2017-06-30T13:39:01
|
|
Make sure to always include "common.h" first
Next to including several files, our "common.h" header also declares
various macros which are then used throughout the project. As such, we
have to make sure to always include this file first in all
implementation files. Otherwise, we might encounter problems or even
silent behavioural differences due to macros or defines not being
defined as they should be. So in fact, our header and implementation
files should make sure to always include "common.h" first.
This commit does so by establishing a common include pattern. Header
files inside of "src" will now always include "common.h" as its first
other file, separated by a newline from all the other includes to make
it stand out as special. There are two cases for the implementation
files. If they do have a matching header file, they will always include
this one first, leading to "common.h" being transitively included as
first file. If they do not have a matching header file, they instead
include "common.h" as first file themselves.
This fixes the outlined problems and will become our standard practice
for header and source files inside of the "src/" from now on.
|
|
|
6f960b55
|
2017-06-11T10:37:46
|
|
Merge pull request #4088 from chescock/packfile-name-using-complete-hash
Ensure packfiles with different contents have different names
|
|
|
6c23704d
|
2017-06-08T21:40:18
|
|
settings: rename `GIT_OPT_ENABLE_SYNCHRONOUS_OBJECT_CREATION`
Initially, the setting has been solely used to enable the use of
`fsync()` when creating objects. Since then, the use has been extended
to also cover references and index files. As the option is not yet part
of any release, we can still correct this by renaming the option to
something more sensible, indicating not only correlation to objects.
This commit renames the option to `GIT_OPT_ENABLE_FSYNC_GITDIR`. We also
move the variable from the object to repository source code.
|
|
c0e54155
|
2017-01-11T10:39:59
|
|
indexer: name pack files after trailer hash
Upstream git.git has changed the way how packfiles are named.
Previously, they were using a hash of the contained object's OIDs, which
has then been changed to use the hash of the complete packfile instead.
See 1190a1acf (pack-objects: name pack files after trailer hash,
2013-12-05) in the git.git repository for more information on this
change.
This commit changes our logic to match the behavior of core git.
|
|
1c04a96b
|
2017-02-28T12:29:29
|
|
Honor `core.fsyncObjectFiles`
|
|
|
2a5ad7d0
|
2017-02-17T16:42:40
|
|
fsync: call it "synchronous" object writing
Rename `GIT_OPT_ENABLE_SYNCHRONIZED_OBJECT_CREATION` ->
`GIT_OPT_ENABLE_SYNCHRONOUS_OBJECT_CREATION`.
|
|
|
1229e1c4
|
2017-02-17T16:36:53
|
|
fsync parent directories when fsyncing
When fsync'ing files, fsync the parent directory in the case where we
rename a file into place, or create a new file, to ensure that the
directory entry is flushed correctly.
|
|
|
1c2c0ae2
|
2016-12-14T12:51:40
|
|
packbuilder: honor git_object__synchronized_writing
Honor `git_object__synchronized_writing` when creating a packfile and
corresponding index.
|
|
|
0d716905
|
2017-01-27T15:23:15
|
|
oidmap: remove GIT__USE_OIDMAP macro
|
|
|
85d2748c
|
2017-01-27T14:05:10
|
|
khash: avoid using `kh_key`/`kh_val` as lvalue
|
|
|
f31cb45a
|
2017-01-25T15:31:12
|
|
khash: avoid using `kh_put` directly
|
|
|
cb18386f
|
2017-01-25T14:26:58
|
|
khash: avoid using `kh_val`/`kh_value` directly
|
|
|
036daa59
|
2017-01-25T14:11:42
|
|
khash: use `git_map_exists` where applicable
|
|
|
9694d9ba
|
2017-01-25T14:09:17
|
|
khash: avoid using `kh_foreach`/`kh_foreach_value` directly
|
|
|
048c5ea7
|
2017-01-21T23:55:21
|
|
Merge pull request #4053 from chescock/extend-packfile-by-pages
Extend packfile in increments of page_size.
|
|
|
87b7a705
|
2017-01-21T15:44:57
|
|
indexer: avoid warning about `idx->pack`
It must be non-NULL to have a valid `git_indexer`.
|
|
|
bf339ab0
|
2017-01-21T14:51:31
|
|
indexer: introduce `git_packfile_close`
Encapsulation!
|
|
|
52949c80
|
2017-01-21T18:30:12
|
|
Merge branch 'pr/4060'
|
|
|
d030bba9
|
2017-01-21T17:15:33
|
|
indexer: only delete temp file if it was unused
Only try to `unlink` our temp file when we know that we didn't copy it
into its permanent location.
|
|
|
f5586f5c
|
2017-01-14T16:37:00
|
|
Addressed review feedback
|
|
|
96df833b
|
2017-01-03T19:15:09
|
|
Close the file before unlinking
I forgot that Windows chokes while trying to delete open files.
|
|
|
db535d0a
|
2017-01-01T12:45:02
|
|
Delete temporary packfile in indexer
This change deletes the temporary packfile that the indexer creates to
avoid littering the pack/ directory with garbage.
|
|
|
c7a1535f
|
2016-12-29T11:47:52
|
|
Extend packfile in increments of page_size.
This improves performance by reducing the number of I/O operations.
|
|
|
909d5494
|
2016-12-29T12:25:15
|
|
giterr_set: consistent error messages
Error messages should be sentence fragments, and therefore:
1. Should not begin with a capital letter,
2. Should not conclude with punctuation, and
3. Should not end a sentence and begin a new one
|
|
d53cc13e
|
2016-03-31T04:12:46
|
|
Merge pull request #3575 from pmq20/master-13jan16
Remove duplicated calls to git_mwindow_close
|
|
|
e50a49ee
|
2016-03-22T01:54:49
|
|
Merge pull request #3559 from yongthecoder/master
Add a sanity check in git_indexer_commit to avoid subtraction overflow.
|
|
87c18197
|
2016-03-16T19:05:11
|
|
Split the page size from the mmap alignment
While often similar, these are not the same on Windows. We want to use the page
size on Windows for the pools, but for mmap we need to use the allocation
granularity as the alignment.
On the other platforms these values remain the same.
|
|
d4e4f272
|
2016-01-13T11:07:14
|
|
Remove duplicated calls to git_mwindow_close
|
|
b3eb2cde
|
2015-12-24T10:04:44
|
|
Avoid subtraction overflow in git_indexer_commit
|
|
c369b379
|
2015-07-31T16:23:11
|
|
Remove extra semicolon outside of a function
Without this change, compiling with gcc and pedantic generates warning:
ISO C does not allow extra ‘;’ outside of a function.
|
|
|
3e8c5e45
|
2015-06-10T16:43:48
|
|
Merge pull request #3174 from libgit2/cmn/idx-fill-hole
indexer: use lseek to extend the packfile
|
|
|
02980bdc
|
2015-06-09T16:53:07
|
|
Initialize a few variables
Coverity complains about the git_rawobj ones because we use a loop in
which we keep remembering the old version, and we end up copying our
object as the base, so we want to have the data pointer be NULL.
|
|
|
aa57231f
|
2015-06-02T10:25:22
|
|
indexer: use lseek to extend the packfile
We've been using `p_ftruncate()` to extend the packfile in order to mmap
it and write the new data into it. This works well in the general case,
but as truncation does not allocate space in the filesystem, it must do
so when we write data to it.
The only way the OS has to indicate a failure to allocate space is via
SIGBUS which means we tried to write outside the file. This will cause
everyone to crash as they don't expect to handle this signal.
Switch to using `p_lseek()` and `p_write()` to extend the file in a way
which tells the filesystem to allocate the space for the missing
data. We can then be sure that we have space to write into.
|
|
e2dd3735
|
2015-05-22T11:20:47
|
|
indexer: avoid loading already existent bases
When thickening a pack, avoid loading already loaded bases and
trying to insert them all over again.
|
|
|
7800048a
|
2015-03-17T10:06:50
|
|
Merge pull request #2972 from libgit2/cmn/pack-objects-walk
[WIP] Smarter pack-building
|
|
|
7c63a33f
|
2015-03-13T19:41:40
|
|
indexer: bring back the error message on duplcate commits
It turns out that erroring out on duplicate commits is the right thing
to do, but git was not hitting the bug on the server-side.
Bring back a descriptive error message in case of duplicate entries and
error out.
|
|
|
dccf59ad
|
2015-03-13T18:28:07
|
|
indexer: don't worry about duplicate objects
If a packfile includes duplicate objects, we can choose to use the
secon copy instead of the first by using the same logic as if it were
the first.
Change the error condition from 0 to -1, which indicates a bad resize,
and set the OOM message in that case.
This does mean we will leak the first copy of the object. We can deal
with that later, but making fetches work is more important.
|
|
|
a34692c4
|
2015-03-13T18:00:15
|
|
indexer: set an error message on duplicate objects in pack
While this is not even close to a fix, we can at least set an error
message so we know which error we are facing. Up to know we just
returned an error without a message.
|
|
|
b63b76e0
|
2014-10-12T11:42:31
|
|
Reorder some khash declarations
Keep the definitions in the headers, while putting the declarations in
the C files. Putting the function definitions in headers causes
them to be duplicated if you include two headers with them.
|
|
|
c251f3bb
|
2014-12-08T16:05:47
|
|
win32: remember to cleanup our hash_ctx
|
|
ec7e680c
|
2014-11-20T12:07:55
|
|
Fix for misleading "missing delta bases" error - Fix #2721.
|
|
|
7561f98d
|
2014-11-19T14:54:30
|
|
Fix for memory leak issue in indexer.c, that surfaces on windows
|
|
|
177a29d8
|
2014-10-27T10:39:45
|
|
Merge commit 'refs/pull/2366/head' of github.com:libgit2/libgit2
|
|
01b432cf
|
2014-07-09T14:12:30
|
|
Properly report failure when expanding a packfile
|
|
bc8a0886
|
2014-06-27T11:51:35
|
|
Fix assert when receiving uncommon sideband packet
|
|
|
b3b66c57
|
2014-06-18T17:13:12
|
|
Share packs across repository instances
Opening the same repository multiple times will currently open the same
file multiple times, as well as map the same region of the file multiple
times. This is not necessary, as the packfile data is immutable.
Instead of opening and closing packfiles directly, introduce an
indirection and allocate packfiles globally. This does mean locking on
each packfile open, but we already use this lock for the global mwindow
list so it doesn't introduce a new contention point.
|
|
62e562f9
|
2014-05-18T07:54:41
|
|
Fix compiler warning (git_off_t cast to size_t).
Use size_t for page size, instead of long. Check result of sysconf.
Use size_t for page offset so no cast to size_t (second arg to p_mmap).
Use mod instead div/mult pair, so no cast to size_t is necessary.
|
|
|
9c4feef9
|
2014-05-17T12:44:21
|
|
Fix warning on uninitialized variable.
|
|
|
0731a5b4
|
2014-05-14T19:12:48
|
|
indexer: mmap fixes for Windows
Windows has its own ftruncate() called _chsize_s().
p_mkstemp() is changed to use p_open() so we can make sure we open for
writing; the addition of exclusive create is a good thing to do
regardless, as we want a temporary path for ourselves.
Lastly, MSVC doesn't quite know how to add two numbers if one of them is a
void pointer, so let's alias it to unsigned char.C
|
|
|
f7310540
|
2014-05-13T02:41:48
|
|
indexer: use mmap for writing
Some OSs cannot keep their ideas about file content straight when mixing
standard IO with file mapping. As we use mmap for reading from the
packfile, let's make writing to the pack file use mmap.
|
|
b3f27c43
|
2014-05-13T21:08:50
|
|
Initialize local variable
|
|
|
2dde1e0c
|
2014-05-08T22:31:59
|
|
indexer: avoid memory moves
Our vector does a move of the rest of the array when we remove an
item. Doing this repeatedly can be expensive, and we do this a lot in
the indexer. Instead, set the value to NULL and skip those entries.
perf reported around 30% of `index-pack` time was going into
memmove. With this change, that goes away and we spent most of the time
hashing and inflating data.
|
|
48e60ae7
|
2014-04-21T11:23:29
|
|
Don't redefine the same callback types, their signatures may change
|
|
e9d5e5f3
|
2014-01-28T16:25:42
|
|
Some fixes for Windows x64 warnings
|
|
557bd1f4
|
2014-01-14T10:27:57
|
|
Merge pull request #2043 from arthurschreiber/arthur/fix-memory-leaks
Fix a bunch of memory leaks.
|
|
24953757
|
2014-01-14T19:08:58
|
|
Incorporate @arrbee's suggestions.
|
|
|
c6f26b48
|
2013-12-13T18:26:46
|
|
Refactor zlib for easier deflate streaming
|
|
|
ac44b3d2
|
2014-01-13T23:28:03
|
|
Incorporate @ethomson's suggestions.
|
|
|
ddf1b1ff
|
2014-01-13T22:33:10
|
|
Fix a memory leak in `hash_and_save` and `inject_object`.
|
|
|
9cfce273
|
2013-12-12T12:11:38
|
|
Cleanups, renames, and leak fixes
This renames git_vector_free_all to the better git_vector_free_deep
and also contains a couple of memory leak fixes based on valgrind
checks. The fixes are specifically: failure to free global dir
path variables when not compiled with threading on and failure to
free filters from the filter registry that had not be initialized
fully.
|
|
|
7697e541
|
2013-12-11T15:02:20
|
|
Test cancel from indexer progress callback
This adds tests that try canceling an indexer operation from
within the progress callback.
After writing the tests, I wanted to run this under valgrind and
had a number of errors in that situation because mmap wasn't
working. I added a CMake option to force emulation of mmap and
consolidated the Amiga-specific code into that new place (so we
don't actually need separate Amiga code now, just have to turn on
-DNO_MMAP).
Additionally, I made the indexer code propagate error codes more
reliably than it used to.
|
|
|
26c1cb91
|
2013-12-09T09:44:03
|
|
One more rename/cleanup for callback err functions
|
|
|
fcd324c6
|
2013-12-06T15:04:31
|
|
Add git_vector_free_all
There are a lot of places that we call git__free on each item in
a vector and then call git_vector_free on the vector itself. This
just wraps that up into one convenient helper function.
|