|
b545be3d
|
2019-09-10T11:14:36
|
|
open:fix memory leak when passing NULL to git_repository_open_ext
|
|
c3a7892f
|
2019-09-09T13:10:24
|
|
Merge pull request #5209 from mkostyuk/apply-wrong-patch
apply: Fix a patch corruption related to EOFNL handling
|
|
|
17d6cd45
|
2019-09-09T13:06:22
|
|
Merge pull request #5210 from buddyspike/master
ignore: correct handling of nested rules overriding wild card unignore
|
|
|
4d3392dd
|
2019-09-09T13:03:42
|
|
Merge pull request #5214 from pks-t/pks/diff-iterator-allocation-fixes
Memory allocation fixes for diff generator
|
|
|
39028eb6
|
2019-09-09T13:00:53
|
|
Merge pull request #5212 from libgit2/ethomson/creds_for_scheme
Use an HTTP scheme that supports the given credentials
|
|
a7b4b639
|
2019-08-24T12:14:31
|
|
ignore: correct handling of nested rules overriding wild card unignore
problem:
filesystem_iterator loads .gitignore files in top-down order.
subsequently, ignore module evaluates them in the order they are loaded.
this creates a problem if we have unignored a rule (using a wild card)
in a sub dir and ignored it again in a level further below (see the test
included in this patch).
solution:
process ignores in reverse order.
closes #4963
|
|
|
5fc27aac
|
2019-08-27T13:38:08
|
|
Merge pull request #5208 from mkostyuk/apply-removed-new-file
apply: git_apply_to_tree fails to apply patches that add new files
|
|
|
6de48085
|
2019-08-27T11:29:24
|
|
Merge pull request #5189 from libgit2/ethomson/attrs_from_head
Optionally read `.gitattributes` from HEAD
|
|
|
aaa48d06
|
2019-08-27T11:26:50
|
|
Merge pull request #5196 from pks-t/pks/config-include-onbranch
config: implement "onbranch" conditional
|
|
699de9c5
|
2019-08-27T10:36:17
|
|
iterator: remove duplicate memset
When allocating new tree iterator frames, we zero out the allocated
memory twice. Remove one of the `memset` calls.
|
|
|
9ca7a60e
|
2019-08-27T10:36:20
|
|
iterator: avoid leaving partially initialized frame on stack
When allocating tree iterator entries, we use GIT_ERROR_ALLOC_CHECK` to
check whether the allocation has failed. The macro will cause the
function to immediately return, though, leaving behind a partially
initialized iterator frame.
Fix the issue by manually checking for memory allocation errors and
using `goto done` in case of an error, popping the iterator frame.
|
|
|
fe241071
|
2019-08-27T10:36:19
|
|
diff_generate: detect memory allocation errors when preparing opts
When preparing options for the two iterators that are about to be
diffed, we allocate a common prefix for both iterators depending on
the options passed by the user. We do not check whether the allocation
was successful, though. In fact, this isn't much of a problem, as using
a `NULL` prefix is perfectly fine. But in the end, we probably want to
detect that the system doesn't have any memory left, as we're unlikely
to be able to continue afterwards anyway.
While the issue is being fixed in the newly created function
`diff_prepare_iterator_opts`, it has been previously existing in the
previous macro `DIFF_FROM_ITERATORS` already.
|
|
|
8a23597b
|
2019-08-27T10:36:18
|
|
diff_generate: refactor `DIFF_FROM_ITERATORS` macro of doom
While the `DIFF_FROM_ITERATORS` does make it shorter to implement the
various `git_diff_foo_to_bar` functions, it is a complex and unreadable
beast that implicitly assumes certain local variable names. This is not
something desirable to have at all and obstructs understanding and more
importantly debugging the code by quite a bit.
The `DIFF_FROM_ITERATORS` macro basically removed the burden of having
to derive the options for both iterators from a pair of iterator flags
and the diff options. This patch introduces a new function that does the
that exact and refactors all callers to manage the iterators by
themselves.
As we potentially need to allocate a shared prefix for the
iterator, we need to tell the caller to allocate that prefix as soon as
the options aren't required anymore. Thus, the function has a `char
**prefix` out pointer that will get set to the allocated string and
subsequently be free'd by the caller.
While this patch increases the line count, I personally deem this to an
acceptable tradeoff for increased readbiblity.
|
|
|
4e20c7b1
|
2019-08-25T22:11:39
|
|
Merge pull request #5213 from boardwalk/dskorupski/fix_include_case
Fix include casing for case-sensitive filesystems.
|
|
44d5e47d
|
2019-08-24T10:39:56
|
|
Fix include casing for case-sensitive filesystems.
|
|
4de51f9e
|
2019-08-23T16:05:28
|
|
http: ensure the scheme supports the credentials
When a server responds with multiple scheme support - for example,
Negotiate and NTLM are commonly used together - we need to ensure that
we choose a scheme that supports the credentials.
|
|
|
60319788
|
2019-08-23T09:58:15
|
|
Merge pull request #5054 from tniessen/util-use-64-bit-timer
util: use 64 bit timer on Windows
|
|
|
8cbef12d
|
2019-08-08T11:52:54
|
|
util: do not perform allocations in insertsort
Our hand-rolled fallback sorting function `git__insertsort_r` does an
in-place sort of the given array. As elements may not necessarily be
pointers, it needs a way of swapping two values of arbitrary size, which
is currently implemented by allocating a temporary buffer of the
element's size. This is problematic, though, as the emulated `qsort`
interface doesn't provide any return values and thus cannot signal an
error if allocation of that temporary buffer has failed.
Convert the function to swap via a temporary buffer allocated on the
stack. Like this, it can `memcpy` contents of both elements in small
batches without requiring a heap allocation. The buffer size has been
chosen such that in most cases, a single iteration of copying will
suffice. Most importantly, it can fully contain `git_oid` structures and
pointers.
Add a bunch of tests for the `git__qsort_r` interface to verify nothing
breaks. Furthermore, this removes the declaration of `git__insertsort_r`
and makes it static as it is not used anywhere else.
|
|
|
f3b3e543
|
2019-08-08T11:34:01
|
|
xdiff: catch memory allocation errors
The xdiff code contains multiple call sites where the results of
`xdl_malloc` are not being checked for memory allocation errors.
Add checks to fix possible segfaults due to `NULL` pointer accesses.
|
|
|
c2dd895a
|
2019-08-08T10:47:29
|
|
transports: http: check for memory allocation failures
When allocating a chunk that is used to write to HTTP streams, we do not
check for memory allocation errors. This may lead us to write to a
`NULL` pointer and thus cause a segfault.
Fix this by adding a call to `GIT_ERROR_CHECK_ALLOC`.
|
|
|
08699541
|
2019-08-08T10:46:42
|
|
trailer: check for memory allocation errors
The "trailer.c" code has been copied mostly verbatim from git.git with
minor adjustments, only. As git.git's `xmalloc` function, which aborts
on memory allocation errors, has been swapped out for `git_malloc`,
which doesn't abort, we may inadvertently access `NULL` pointers.
Add checks to fix this.
|
|
|
8c7d9761
|
2019-08-08T10:45:12
|
|
posix: fix direct use of `malloc`
In "posix.c" there are multiple callsites which execute `malloc` instead
of `git__malloc`. Thus, users of library are not able to track these
allocations with a custom allocator.
Convert these call sites to use `git__malloc` instead.
|
|
|
a477bff1
|
2019-08-08T10:44:57
|
|
indexer: catch OOM when adding expected OIDs
When adding OIDs to the indexer's map of yet-to-be-seen OIDs to verify
that packfiles are complete, we do so by first allocating a new OID and
then calling `git_oidmap_set` on it. There was no check for memory
allocation errors in place, though, leading to possible segfaults due to
trying to copy data to a `NULL` pointer.
Verify the result of `git__malloc` with `GIT_ERROR_CHECK_ALLOC` to fix
the issue.
|
|
|
d4fe402b
|
2019-08-08T10:36:33
|
|
merge: check return value of `git_commit_list_insert`
The function `git_commit_list_insert` dynamically allocates memory and
may thus fail to insert a given commit, but we didn't check for that in
several places in "merge.c".
Convert surrounding functions to return error codes and check whether
`git_commit_list_insert` was successful, returning an error if not.
|
|
|
c0486188
|
2019-08-08T10:28:09
|
|
blame_git: detect memory allocation errors
The code in "blame_git.c" was mostly imported from git.git with only
minor changes. One of these changes was to use our own allocators
instead of git's `xmalloc`, but there's a subtle difference: `xmalloc`
would abort the program if unable to allocate any memory, bit
`git__malloc` doesn't. As we didn't check for memory allocation errors
in some places, we might inadvertently dereference a `NULL` pointer in
out-of-memory situations.
Convert multiple functions to return proper error codes and add calls to
`GIT_ERROR_CHECK_ALLOC` to fix this.
|
|
|
1c847169
|
2019-08-21T16:38:59
|
|
http: allow dummy negotiation scheme to fail to act
The dummy negotiation scheme is used for known authentication strategies
that do not wish to act. For example, when a server requests the
"Negotiate" scheme but libgit2 is not built with Negotiate support, and
will use the "dummy" strategy which will simply not act.
Instead of setting `out` to NULL and returning a successful code, return
`GIT_PASSTHROUGH` to indicate that it did not act and catch that error
code.
|
|
de4bc2bd
|
2019-08-20T03:29:45
|
|
apply: git_apply_to_tree fails to apply patches that add new files
git_apply_to_tree() cannot be used apply patches with new files. An attempt
to apply such a patch fails because git_apply_to_tree() tries to remove a
non-existing file from an old index.
The solution is to modify git_apply_to_tree() to git_index_remove() when the
patch states that the modified files is removed.
|
|
|
630127e3
|
2019-08-20T03:08:32
|
|
apply: Fix a patch corruption related to EOFNL handling
Use of apply's API can lead to an improper patch application and a corruption
of the modified file.
The issue is caused by mishandling of the end of file changes if there are
several hunks to apply. The new line character is added to a line from a wrong
hunk.
The solution is to modify apply_hunk() to add the newline character at the end
of a line from a right hunk.
|
|
071750a3
|
2019-08-15T14:18:26
|
|
cmake: move _WIN32_WINNT definitions to root
|
|
|
0f40e68e
|
2019-08-14T09:05:07
|
|
Merge pull request #5187 from ianhattendorf/fix/clone-whitespace
clone: don't decode URL percent encodings
|
|
|
57a9ccd5
|
2019-06-21T15:53:54
|
|
commit_list: fix possible buffer overflow in `commit_quick_parse`
The function `commit_quick_parse` provides a way to quickly parse
parts of a commit without storing or verifying most of its
metadata. The first thing it does is calculating the number of
parents by skipping "parent " lines until it finds the first
non-parent line. Afterwards, this parent count is passed to
`alloc_parents`, which will allocate an array to store all the
parent.
To calculate the amount of storage required for the parents
array, `alloc_parents` simply multiplicates the number of parents
with the respective elements's size. This already screams "buffer
overflow", and in fact this problem is getting worse by the
result being cast to an `uint32_t`.
In fact, triggering this is possible: git-hash-object(1) will
happily write a commit with multiple millions of parents for you.
I've stopped at 67,108,864 parents as git-hash-object(1)
unfortunately soaks up the complete object without streaming
anything to disk and thus will cause an OOM situation at a later
point. The point here is: this commit was about 4.1GB of size but
compressed down to 24MB and thus easy to distribute.
The above doesn't yet trigger the buffer overflow, thus. As the
array's elements are all pointers which are 8 bytes on 64 bit, we
need a total of 536,870,912 parents to trigger the overflow to
`0`. The effect is that we're now underallocating the array
and do an out-of-bound writes. As the buffer is kindly provided
by the adversary, this may easily result in code execution.
Extrapolating from the test file with 67m commits to the one with
536m commits results in a factor of 8. Thus the uncompressed
contents would be about 32GB in size and the compressed ones
192MB. While still easily distributable via the network, only
servers will have that amount of RAM and not cause an
out-of-memory condition previous to triggering the overflow. This
at least makes this attack not an easy vector for client-side use
of libgit2.
|
|
cb1439c9
|
2019-06-19T12:59:27
|
|
config: validate ownership of C:\ProgramData\Git\config before using it
When the VirtualStore feature is in effect, it is safe to let random
users write into C:\ProgramData because other users won't see those
files. This seemed to be the case when we introduced support for
C:\ProgramData\Git\config.
However, when that feature is not in effect (which seems to be the case
in newer Windows 10 versions), we'd rather not use those files unless
they come from a trusted source, such as an administrator.
This change imitates the strategy chosen by PowerShell's native OpenSSH
port to Windows regarding host key files: if a system file is owned
neither by an administrator, a system account, or the current user, it
is ignored.
|
|
|
5774b2b1
|
2019-08-11T23:42:45
|
|
Merge pull request #5113 from pks-t/pks/stash-perf
stash: avoid recomputing tree when committing worktree
|
|
|
42bacbc6
|
2019-08-11T21:06:19
|
|
Merge pull request #5121 from pks-t/pks/variadic-errors
Variadic macros
|
|
|
fba3bf79
|
2019-07-21T14:15:12
|
|
blob: optionally read attributes from repository
When `GIT_BLOB_FILTER_ATTTRIBUTES_FROM_HEAD` is passed to
`git_blob_filter`, read attributes from `gitattributes` files that
are checked in to the repository at the HEAD revision. This passes
the flag `GIT_FILTER_ATTRIBUTES_FROM_HEAD` to the filter functions.
|
|
|
f0f27c1c
|
2019-07-21T14:13:25
|
|
filter: optionally read attributes from repository
When `GIT_FILTER_ATTRIBUTES_FROM_HEAD` is specified, configure the
filter to read filter attributes from `gitattributes` files that are
checked in to the repository at the HEAD revision. This passes the flag
`GIT_ATTR_CHECK_INCLUDE_HEAD` to the attribute reading functions.
|
|
|
4fd5748c
|
2019-07-21T14:11:03
|
|
attr: optionally read attributes from repository
When `GIT_ATTR_CHECK_INCLUDE_HEAD` is specified, read `gitattribute`
files that are checked into the repository at the HEAD revision.
|
|
|
a5392eae
|
2019-07-21T12:13:07
|
|
blob: allow blob filtering to ignore system gitattributes
Introduce `GIT_BLOB_FILTER_NO_SYSTEM_ATTRIBUTES`, which tells
`git_blob_filter` to ignore the system-wide attributes file, usually
`/etc/gitattributes`.
This simply passes the appropriate flag to the attribute loading code.
|
|
|
22eb12af
|
2019-07-21T12:12:05
|
|
filter: add GIT_FILTER_NO_SYSTEM_ATTRIBUTES option
Allow system-wide attributes (the ones specified in
`/etc/gitattributes`) to be ignored if the flag
`GIT_FILTER_NO_SYSTEM_ATTRIBUTES` is specified.
|
|
|
fa1a4c77
|
2019-07-21T11:03:01
|
|
blob: deprecate `git_blob_filtered_content`
Users should now use `git_blob_filter`.
|
|
|
a32ab076
|
2019-07-21T10:56:42
|
|
blob: introduce git_blob_filter
Provide a function to filter blobs that allows for more functionality
than the existing `git_blob_filtered_content` function.
|
|
|
b0692d6b
|
2019-08-09T09:01:56
|
|
Merge pull request #4913 from implausible/feature/signing-rebase-commits
Add sign capability to git_rebase_commit
|
|
998f9c15
|
2019-08-07T07:21:27
|
|
fixup: strange indentation
|
|
|
f627ba6c
|
2019-08-02T13:18:07
|
|
Merge pull request #5197 from pks-t/pks/remote-ifdeffed-block
remote: remove unused block of code
|
|
|
e23c0b18
|
2019-08-02T07:52:58
|
|
remote: remove unused block of code
In "remote.c", we have a chunk of code that is #ifdef'fed out via
`#if 0` with a comment that we could export it as a helper function.
The code was implemented in 2013 and ifdef'fed in 2014, which shows that
there's clearly no interest in having such a helper at all.
As this block has recently created some confusion about `p_getenv` due
to it containing the only reference to that function in our codebase,
let's remove this block altogether.
|
|
|
d588de7c
|
2019-08-02T07:51:02
|
|
Merge pull request #5191 from eaigner/master
config: check if we are running in a sandboxed environment
|
|
952fbbfb
|
2019-08-01T20:04:11
|
|
config: check if we are running in a sandboxed environment
On macOS the $HOME environment variable returns the path to the sandbox container instead of the actual user $HOME for sandboxed apps. To get the correct path, we have to get it from the password file entry.
|
|
|
722ba93f
|
2019-08-01T15:14:06
|
|
config: implement "onbranch" conditional
With Git v2.23.0, the conditional include mechanism gained another new
conditional "onbranch". As the name says, it will cause a file to be
included if the "onbranch" pattern matches the currently checked out
branch.
Implement this new condition and add a bunch of tests.
|
|
|
1721ab04
|
2019-06-16T11:25:47
|
|
unix: posix: avoid use of variadic macro `p_snprintf`
The macro `p_snprintf` is implemented as a variadic macro that
calls `snprintf` directly with `__VA_ARGS__`. In C89, variadic
macros are not allowed, but as the arguments of `p_snprintf` and
`snprintf` are matching 1:1, we can fix this by simply removing
the parameter list from `p_snprintf`.
|
|
|
63d8cd18
|
2019-06-16T11:17:17
|
|
apply: remove use of variadic error macro
The macro `apply_err` is implemented as a variadic macro, which
are not defined by C89. Convert it to a variadic function,
instead.
|
|
|
27b8b31e
|
2019-08-01T11:57:03
|
|
parse: remove use of variadic macros which are not C89 compliant
The macro `git_parse_error` is implemented in a variadic way so
that it's possible to pass printf-style parameters.
Unfortunately, variadic macros are not defined by C89 and thus we
cannot use that functionality. But as we have implemented
`git_error_vset` in the previous commit, we can now just use that
instead.
Convert `git_parse_error` to a variadic function and use
`git_error_vset` to fix the compliance violation. While at it,
move the function to "patch_parse.c".
|
|
|
c8e63812
|
2019-06-16T11:03:08
|
|
errors: introduce `git_error_vset` function
Right now, we only provide a `git_error_set` that has a variadic
function signature. It's impossible to drive this function in a
C89-compliant way from other functions that have a variadic
signature, though, like for example `git_parse_error`.
Implement a new `git_error_vset` function that gets a `va_list`
as parameter, fixing the above problem.
|
|
|
e8f63411
|
2019-08-01T11:29:58
|
|
Merge pull request #5186 from pks-t/pks/config-snapshot-separation
config: separate file and snapshot backends
|
|
|
fb0730f1
|
2019-04-16T23:49:16
|
|
util: use 64 bit timer on Windows
git__timer was originally implemented using a 32 bit timer since
Windows XP did not support GetTickCount64. Windows XP was discontinued
five years ago, so it should be safe to use the new API.
As a benefit, we do not need to care about overflows for the next 585
million years.
|
|
c8e249b0
|
2019-07-29T10:51:22
|
|
object: deprecate git_object__size for removal
In #5118 we remove the double-underscore to make it a normally-named public
function. However, this is not an interesting function outside of the library
and it takes up a name for something that could be more useful.
Remove the single-underscore version as we have not done any releases with it.
|
|
|
37ebe9ad
|
2019-07-24T18:49:08
|
|
config_backend: rename internal structures
The internal backend structures are kind-of legacy and do not really
speak for themselves. Rename them accordingly to make them easier to
understand.
|
|
|
2bff84ba
|
2019-07-26T21:02:56
|
|
config_file: separate out read-only backend
To further distinguish the file writeable and readonly backends,
separate the readonly backend into its own "config_snapshot.c"
implementation. The snapshot backend can be generically used to snapshot
any type of backend.
|
|
|
f0b10066
|
2019-07-24T18:37:14
|
|
config_file: fix cast of readonly backend
In `backend_readonly_free`, the passed in config backend is being cast
to a `diskfile_backend` instead of to a `diskfile_readonly_backend`.
While this works out just fine because we only access its header values,
which were shared between both backends, it is undefined behaviour.
Use the correct type to fix this.
|
|
|
a3159df8
|
2019-07-24T18:31:43
|
|
config_file: remove shared `diskfile_header` struct
The `diskfile_header` structure is shared between both
`diskfile_backend` and `diskfile_readonly_backend`. The separation and
resulting casting is confusing at times and a source for programming
errors.
Remove the shared structure and inline them directly.
|
|
|
271e5fba
|
2019-07-24T18:18:18
|
|
config_file: duplicate accessors for readonly backend
While most functions of the readonly configuration backend are
implemented separately from the writeable configuration backend, the two
functions `config_iterator_new` and `config_get` are shared between
both. This sharing makes it necessary to have some shared data
structures, which is the `diskfile_header` structure. Unfortunately, this
makes the backends harder to grasp than necessary due to all the casting
between structs and also quite error prone.
Reimplement those functions for the readonly backends. As readonly
backends cannot be refreshed anyway, we can remove the calls to
`config_refresh` in there.
|
|
|
4e7ce1fb
|
2019-07-24T18:13:52
|
|
config_file: reimplement `config_readonly_open` generically
The `config_readonly_open` function currently receives as input a
diskfile backend and will copy its entries to a new snapshot. This is
rather intimate, as we need to assume that the source config backend is
in fact a diskfile entry. We can do better than this though by using
generic methods to copy contents of the provided backend, e.g. by using
a config iterator. This also allows us to decouple the read-only backend
from the read-write backend.
|
|
|
76182e84
|
2019-07-24T18:04:38
|
|
config_entries: fix possible segfault when duplicating entries
When duplicating a configuration entry, we allocate a new entry but do
not verify that we get a valid pointer back. As we're dereferencing the
pointer afterwards, we might thus run into a segfault in out-of-memory
situations.
Extract a new function `git_config_entries_dup_entry` that handles the
complete entry duplication. Fix the error by using
`GIT_ERROR_CHECK_ALLOC`.
|
|
|
ba2885da
|
2019-07-24T18:05:28
|
|
git_net_url_parse: don't git_buf_decode_percent for path
|
|
|
2766b92d
|
2019-07-21T15:10:34
|
|
config_file: refresh when creating an iterator
When creating a new iterator for a config file backend, then we should
always make sure that we're up to date by calling `config_refresh`.
Otherwise, we might not notice when another process has modified the
configuration file and thus will represent outdated values.
Add two tests to config::stress that verify that we get up-to-date
values when reading configuration entries via `git_config_iterator`.
|
|
|
9fac8b78
|
2019-07-21T15:08:22
|
|
config_file: do not refresh read-only backends
If calling `config_refresh` on a read-only configuration file backend,
then we will segfault when comparing the timestamp of the file due to
`path` being uninitialized. As a read-only snapshot should not be
refreshed anyway and stay consistent, we can simply return early when
calling `config_refresh` on a read-only snapshot.
|
|
|
28d11b59
|
2019-07-21T14:41:21
|
|
config_file: consistently use `GIT_CONTAINER_OF`
|
|
|
6be5ac23
|
2019-07-11T15:30:51
|
|
checkout: postpone creation of symlinks to the end
On most platforms it's fine to create symlinks to nonexisting files. Not
so on Windows, where the type of a symlink (file or directory) needs to
be set at creation time. So depending on whether the target file exists
or not, we may end up with different symlink types. This creates a
problem when performing checkouts, where we simply iterate over all blobs
that need to be updated without treating symlinks any special. If the
target file of the symlink is going to be checked out after the symlink
itself, then the symlink will be created as directory symlink and not as
file symlink.
Fix the issue by iterating over blobs twice: once to perform postponed
deletions and updates to non-symlink blobs, and once to perform updates
to symlink blobs.
|
|
|
50194dcd
|
2019-07-11T15:14:42
|
|
win32: fix symlinks to relative file targets
When creating a symlink in Windows, one needs to tell Windows whether
the symlink should be a file or directory symlink. To determine which
flag to pass, we call `GetFileAttributesW` on the target file to see
whether it is a directory and then pass the flag accordingly. The
problem though is if create a symlink with a relative target path, then
we will check that relative path while not necessarily being inside of
the working directory where the symlink is to be created. Thus, getting
its attributes will either fail or return attributes of the wrong
target.
Fix this by resolving the target path relative to the directory in which
the symlink is to be created.
|
|
|
a00842c4
|
2019-06-29T09:59:14
|
|
win32: correctly unlink symlinks to directories
When deleting a symlink on Windows, then the way to delete it depends on
whether it is a directory symlink or a file symlink. In the first case,
we need to use `DeleteFile`, in the second `RemoveDirectory`. Right now,
`p_unlink` will only ever try to use `DeleteFile`, though, and thus fail
to remove directory symlinks. This mismatches how unlink(3P) is expected
to behave, though, as it shall remove any symlink disregarding whether
it is a file or directory symlink.
In order to correctly unlink a symlink, we thus need to check what kind
of file this is. If we were to first query file attributes of every file
upon calling `p_unlink`, then this would penalize the common case
though. Instead, we can try to first delete the file with `DeleteFile`
and only if the error returned is `ERROR_ACCESS_DENIED` will we query
file attributes and determine whether it is a directory symlink to use
`RemoveDirectory` instead.
|
|
|
ded77bb1
|
2019-06-29T09:58:34
|
|
path: extract function to check whether a path supports symlinks
When initializing a repository, we need to check whether its working
directory supports symlinks to correctly set the initial value of the
"core.symlinks" config variable. The code to check the filesystem is
reusable in other parts of our codebase, like for example in our tests
to determine whether certain tests can be expected to succeed or not.
Extract the code into a new function `git_path_supports_symlinks` to
avoid duplicate implementations. Remove a duplicate implementation in
the repo test helper code.
|
|
|
e54343a4
|
2019-06-29T09:17:32
|
|
fileops: rename to "futils.h" to match function signatures
Our file utils functions all have a "futils" prefix, e.g.
`git_futils_touch`. One would thus naturally guess that their
definitions and implementation would live in files "futils.h" and
"futils.c", respectively, but in fact they live in "fileops.h".
Rename the files to match expectations.
|
|
|
a7d32d60
|
2019-07-20T18:46:32
|
|
stash: avoid recomputing tree when committing worktree
When creating a new stash, we need to create there separate
commits storing differences stored in the index, untracked
changes as well as differences in the working directory. The
first two will only be done conditionally if the equivalent
options "git stash --keep-index --include-untracked" are being
passed to `git_stash_save`, but even when only creating a stash
of worktree changes we're much slower than git.git. Using our new
stash example:
$ time git stash
Saved working directory and index state WIP on (no branch): 2f7d9d47575e Linux 5.1.7
real 0m0.528s
user 0m0.309s
sys 0m0.381s
$ time lg2 stash
real 0m27.165s
user 0m13.645s
sys 0m6.403s
As can be seen, libgit2 is more than 50x slower than git.git!
When creating the stash commit that includes all worktree
changes, we create a completely new index to prepare for the new
commit and populate it with the entries contained in the index'
tree. Here comes the catch: by populating the index with a tree's
contents, we do not have any stat caches in the index. This means
that we have to re-validate every single file from the worktree
and see whether it has changed.
The issue can be fixed by populating the new index with the
repo's existing index instead of with the tree. This retains all
stat cache information, and thus we really only need to check
files that have changed stat information. This is semantically
equivalent to what we previously did: previously, we used the
tree of the commit computed from the index. Now we're just using
the index directly.
And, in fact, the cache is doing wonders:
time lg2 stash
real 0m1.836s
user 0m1.166s
sys 0m0.663s
We're now performing 15x faster than before and are only 3x
slower than git.git now.
|
|
|
a613832e
|
2019-07-20T18:49:48
|
|
patch_parse: fix segfault due to line containing static contents
With commit dedf70ad2 (patch_parse: do not depend on parsed buffer's
lifetime, 2019-07-05), all lines of the patch are allocated with
`strdup` to make lifetime of the parsed patch independent of the buffer
that is currently being parsed. In patch b08932824 (patch_parse: ensure
valid patch output with EOFNL, 2019-07-11), we introduced another
code location where we add lines to the parsed patch. But as that one
was implemented via a separate pull request, it wasn't converted to use
`strdup`, as well. As a consequence, we generate a segfault when trying
to deallocate the potentially static buffer that's now in some of the
lines.
Use `git__strdup` to fix the issue.
|
|
|
e07dbc92
|
2019-07-20T11:26:00
|
|
Merge pull request #5173 from pks-t/pks/gitignore-wildmatch-error
ignore: fix determining whether a shorter pattern negates another
|
|
|
fd7a384b
|
2019-07-20T11:24:37
|
|
Merge pull request #5159 from pks-t/pks/patch-parse-old-missing-nl
patch_parse: handle missing newline indicator in old file
|
|
|
f33ca472
|
2019-07-20T11:06:23
|
|
Merge pull request #5158 from pks-t/pks/patch-parsed-lifetime
patch_parse: do not depend on parsed buffer's lifetime
|
|
|
d78a1b18
|
2019-07-20T11:04:53
|
|
Merge pull request #5174 from pks-t/pks/winhttp-hash
sha1: fix compilation of WinHTTP backend
|
|
|
964c1c60
|
2019-07-20T11:02:30
|
|
Merge pull request #5176 from pks-t/pks/repo-template-head
repository: do not initialize HEAD if it's provided by templates
|
|
|
9d46f167
|
2019-07-19T10:50:51
|
|
repository: do not initialize HEAD if it's provided by templates
When using templates to initialize a git repository, then git-init(1)
will copy over all contents of the template directory. These will be
preferred over the default ones created by git-init(1). While we mostly
do the same, there is the exception of "HEAD". While we do copy over the
template's HEAD file, afterwards we'll immediately re-initialize its
contents with either the default "ref: refs/origin/master" or the init
option's `initial_head` field.
Let's fix the inconsistency with upstream git-init(1) by not overwriting
the template HEAD, but only if the user hasn't set `opts.initial_head`.
If the `initial_head` field has been supplied, we should use that
indifferent from whether the template contained a HEAD file or not. Add
tests to verify we correctly use the template directory's HEAD file and
that `initial_head` overrides the template.
|
|
|
f3134a84
|
2019-07-19T10:41:10
|
|
repository: update error handling in `init_ext`
Update `git_repository_init_ext` to use our typical style of error
handling. The function had multiple statements which didn't `goto out`
immediately but instead deferred it to later calls combined with `if`
statements.
|
|
|
869ae5a3
|
2019-07-19T10:15:43
|
|
repository: avoid swallowing error codes in `create_head`
The error handling in `git_repository_create_head` completely swallows
all error codes. While probably not too much of a problem, this also
violates our usual coding style.
Refactor the code to use a local `error` variable with the typical `goto
out` statements.
|
|
|
3424c210
|
2019-07-19T08:00:13
|
|
Merge pull request #5138 from libgit2/ethomson/cvar
configuration: cvar -> configmap
|
|
|
a33c0de2
|
2019-07-18T19:17:40
|
|
Merge pull request #5172 from bk2204/cache-efficient-eviction
Evict cache items more efficiently
|
|
|
658022c4
|
2019-07-18T13:53:41
|
|
configuration: cvar -> configmap
`cvar` is an unhelpful name. Refactor its usage to `configmap` for more
clarity.
|
|
|
343fb83a
|
2019-07-18T13:50:47
|
|
Merge pull request #5156 from pks-t/pks/attr-macros-in-subdir
gitattributes: ignore macros defined in subdirectories
|
|
|
7574564e
|
2019-07-18T13:40:34
|
|
sha1: win32: fix compilation due to unknown type
In commit bbf034ab9 (hash: move `git_hash_prov` into Win32 backend,
2019-02-22), the `git_hash_prov`'s structure name has been removed in
favour of its typedef'ed name. But as we have no CI that compiles with
the WinHTTPS hashing backend right now, it wasn't noticed that the
implementation that uses this struct wasn't changed correctly.
Fix the struct type to make it compile again.
|
|
|
6f6340af
|
2019-07-18T11:57:55
|
|
ignore: fix determining whether a shorter pattern negates another
When computing whether we need to store a negative pattern, we iterate
through all previously known patterns and check whether the negative
pattern undoes any of the previous ones. In doing so we call `wildmatch`
and check it's return for any negative error values. If there was a
negative return, we will abort and bubble up that error to the caller.
In fact, this check for negative values stems from the time where we
still used `fnmatch` instead of `wildmatch`. For `fnmatch`, negative
values indicate a "real" error, while for `wildmatch` a negative value
may be returned if the matching was prematurely aborted. A premature
abort may for example also happen if the pattern matches a prefix of the
haystack if the pattern is shorter. Returning an error in that case is
the wrong thing to do.
Fix the code to compare for equality with `WM_MATCH`, only. Negative
values returned by `wildmatch` are perfectly fine and thus should be
ignored. Add a test that verifies we do not see the error.
|
|
770b91b1
|
2019-07-17T15:59:54
|
|
cache: evict items more efficiently
When our object cache is full, we pick eight items (or the whole cache,
if there are fewer) and evict them. For small cache sizes, this is fine,
but when we're dealing with a large number of objects, we can repeatedly
exhaust the cache and spend a large amount of time in git_oidmap_iterate
trying to find items to evict.
Instead, let's assume that if the cache gets full, we have a large
number of objects that we're handling, and be more aggressive about
evicting items. Let's remove one item for every 2048 items, but not less
than 8. This causes us to scale our evictions in proportion to the size
of the cache and significantly reduces the time we spend in
git_oidmap_iterate.
Before this change, a full pack of all the non-blob objects in the Linux
repository took in excess of 30 minutes and spent 62.3% of total runtime
in odb_read_1 and its children, and 44.3% of the time in
git_oidmap_iterate. With this change, the same operation now takes 14
minutes and 44 seconds, and odb_read_1 accounts for only 35.9% of total
time, whereas git_oidmap_iterate consists of 6.2%.
Note that we do spend a little more time inflating objects and a decent
amount more time in memcmp. However, overall, the time taken is
significantly improved, and time in pack building is now dominated by
git_delta_create_from_index (33.7%), which is what we would expect.
|
|
|
c4df926b
|
2019-07-16T21:54:10
|
|
pack-objects: allocate memory more efficiently
The packbuilder code allocates memory in chunks. When it needs to
allocate, it tries to add 1024 to the number of objects and multiply by
3/2. However, it actually multiplies by 1 instead, since it performs an
integral division in the expression "3 / 2" and only then multiplies by
the increased number of objects.
The current behavior causes the code to waste massive amounts of time
copying memory when it reallocates, causing inserting all non-blob
objects in the Linux repository into a new pack to take some
indeterminate time greater than 5 minutes instead of 52 seconds.
Correct this error by first dividing by two, and only then multiplying
by 3. We still check for overflow for the multiplication, which is the
only part that can overflow. This appears to be the only place in the
code base which has this problem.
|
|
|
f8346905
|
2019-07-12T09:03:33
|
|
attr_file: ignore macros defined in subdirectories
Right now, we are unconditionally applying all macros found in a
gitatttributes file. But quoting gitattributes(5):
Custom macro attributes can be defined only in top-level
gitattributes files ($GIT_DIR/info/attributes, the .gitattributes
file at the top level of the working tree, or the global or
system-wide gitattributes files), not in .gitattributes files in
working tree subdirectories. The built-in macro attribute "binary"
is equivalent to:
So gitattribute files in subdirectories of the working tree may
explicitly _not_ contain macro definitions, but we do not currently
enforce this limitation.
This patch introduces a new parameter to the gitattributes parser that
tells whether macros are allowed in the current file or not. If set to
`false`, we will still parse macros, but silently ignore them instead of
adding them to the list of defined macros. Update all callers to
correctly determine whether the to-be-parsed file may contain macros or
not. Most importantly, when walking up the directory hierarchy, we will
only set it to `true` once it reaches the root directory of the repo
itself.
Add a test that verifies that we are indeed not applying macros from
subdirectories. Previous to these changes, the test would've failed.
|
|
|
97968529
|
2019-07-05T08:05:16
|
|
attr_file: refactor `parse_buffer` function
The gitattributes code is one of our oldest and most-untouched codebases
in libgit2, and as such its code style doesn't quite match our current
best practices. Refactor the function `git_attr_file__parse_buffer` to
better match them.
|
|
|
dbc7e4b1
|
2019-07-05T07:53:02
|
|
attr_file: refactor `load_standalone` function
The gitattributes code is one of our oldest and most-untouched codebases
in libgit2, and as such its code style doesn't quite match our current
best practices. Refactor the function `git_attr_file__lookup_standalone`
to better match them.
|
|
|
be8f9bb1
|
2019-07-05T13:33:10
|
|
attrcache: fix memory leak if inserting invalid macro to cache
A macro without any assignments is considered an invalid macro by the
attributes cache and is thus not getting added to the macro map at all.
But as `git_attr_cache__insert_macro` returns success with neither
free'ing nor adopting the macro into its map, this will cause a memory
leak.
Fix this by freeing the macro in the function if it's not going to be
added. This is perfectly fine to do, as callers assume that the
attrcache will have the macro adopted on success anyway.
|
|
|
7277bf83
|
2019-07-05T13:33:05
|
|
attrcache: fix multiple memory leaks when inserting macros
The function `git_attr_cache__insert_macro` is responsible for adopting
macros in the per-repo macro cache. When adding a macro that replaces an
already existing macro (e.g. because of re-parsing gitattributes files),
then we do not free the previous macro and thus cause a memory leak.
Fix this leak by first checking if the cache already has a macro defined
with the same name. If so, free it before replacing the cache entry with
the new instance.
|
|
|
5ae22a63
|
2019-06-21T08:13:31
|
|
fileops: fix creation of directory in filesystem root
In commit 45f24e787 (git_repository_init: stop traversing at
windows root, 2019-04-12), we have fixed `git_futils_mkdir` to
correctly handle the case where we create a directory in
Windows-style filesystem roots like "C:\repo".
The problem here is an off-by-one: previously, to that commit,
we've been checking wether the parent directory's length is equal
to the root directory's length incremented by one. When we call
the function with "/example", then the parent directory's length
("/") is 1, but the root directory offset is 0 as the path is
directly rooted without a drive prefix. This resulted in `1 == 0 +
1`, which was true. With the change, we've stopped incrementing
the root directory length, and thus now compare `1 <= 0`, which
is false.
The previous way of doing it was kind of finicky any non-obvious,
which is also why the error was introduced. So instead of just
re-adding the increment, let's explicitly add a condition that
aborts finding the parent if the current parent path is "/".
Making this change causes Azure Pipelines to fail the testcase
repo::init::nonexistent_paths on Unix-based systems. This is because we
have just fixed creating directories in the filesystem root, which
previously didn't work. As Docker-based tests are running as root user,
we are thus able to create the non-existing path and will now succeed to
create the repository that was expected to actually fail.
Let's split this up into three different tests:
- A test to verify that we do not create repos in a non-existing parent
directoy if the flag `GIT_REPOSITORY_INIT_MKPATH` is not set.
- A test to verify that we fail if the root directory does not exist. As
there is a common root directory on Unix-based systems that always
exist, we can only test for this on Windows-based systems.
- A test to verify that we fail if trying to create a repository in an
unwriteable parent directory. We can only test this if not running
tests as root user, as CAP_DAC_OVERRIDE will cause us to ignore
permissions when creating files.
|
|
|
b0893282
|
2019-07-11T12:12:04
|
|
patch_parse: ensure valid patch output with EOFNL
|
|
|
3f855fe8
|
2019-07-05T11:06:33
|
|
patch_parse: handle missing newline indicator in old file
When either the old or new file contents have no newline at the end of
the file, then git-diff(1) will print out a "\ No newline at end of
file" indicator. While we do correctly handle this in the case where the
new file has this indcator, we fail to parse patches where the old file
is missing a newline at EOF.
Fix this bug by handling and missing newline indicators in the old file.
Add tests to verify that we can parse such files.
|
|
|
b30dab8f
|
2019-07-11T12:10:48
|
|
apply: refactor to use a switch statement
|
|
|
001d76e1
|
2019-07-11T11:34:40
|
|
diff: ignore EOFNL for computing patch IDs
The patch ID is supposed to be mostly context-insignificant and
thus only includes added or deleted lines. As such, we shouldn't honor
end-of-file-without-newline markers in diffs.
Ignore such lines to fix how we compute the patch ID for such diffs.
|
|
|
dbeadf8a
|
2019-07-11T10:56:05
|
|
config_parse: provide parser init and dispose functions
Right now, all configuration file backends are expected to
directly mess with the configuration parser's internals in order
to set it up. Let's avoid doing that by implementing both a
`git_config_parser_init` and `git_config_parser_dispose` function
to clearly define the interface between configuration backends
and the parser.
Ideally, we would make the `git_config_parser` structure
definition private to its implementation. But as that would
require an additional memory allocation that was not required
before we just live with it being visible to others.
|