|
3cd123e9
|
2019-06-15T21:56:53
|
|
win32: define DWORD_MAX if it's not defined
MinGW does not define DWORD_MAX. Specify it when it's not defined.
|
|
|
d93b0aa0
|
2019-06-15T21:47:40
|
|
win32: decorate unused parameters
|
|
|
8c925ef8
|
2019-05-21T14:30:28
|
|
smart protocol: validate progress message length
Ensure that the server has not sent us overly-large sideband messages
(ensure that they are no more than `INT_MAX` bytes), then cast to `int`.
|
|
|
7afe788c
|
2019-05-21T14:27:46
|
|
smart transport: use size_t for sizes
|
|
|
db7f1d9b
|
2019-05-21T14:21:58
|
|
local transport: cast message size to int explicitly
Our progress information messages are short (and bounded by their format
string), cast the length to int for callers.
|
|
|
8048ba70
|
2019-05-21T14:18:40
|
|
winhttp: safely cast length to DWORD
|
|
|
2a4bcf63
|
2019-06-23T18:24:23
|
|
errors: use lowercase
Use lowercase for our error messages, per our custom.
|
|
|
5d92e547
|
2019-06-08T17:28:35
|
|
oid: `is_zero` instead of `iszero`
The only function that is named `issomething` (without underscore) was
`git_oid_iszero`. Rename it to `git_oid_is_zero` for consistency with
the rest of the library.
|
|
|
0b5ba0d7
|
2019-06-06T16:36:23
|
|
Rename opt init functions to `options_init`
In libgit2 nomenclature, when we need to verb a direct object, we name
a function `git_directobject_verb`. Thus, if we need to init an options
structure named `git_foo_options`, then the name of the function that
does that should be `git_foo_options_init`.
The previous names of `git_foo_init_options` is close - it _sounds_ as
if it's initializing the options of a `foo`, but in fact
`git_foo_options` is its own noun that should be respected.
Deprecate the old names; they'll now call directly to the new ones.
|
|
|
10e8fe55
|
2019-03-21T13:55:54
|
|
transports: add an `is_complete` function for auth
Some authentication mechanisms (like HTTP Basic and Digest) have a
one-step mechanism to create credentials, but there are more complex
mechanisms like NTLM and Negotiate that require challenge/response after
negotiation, requiring several round-trips. Add an `is_complete`
function to know when they have round-tripped enough to be a single
authentication and should now either have succeeded or failed to
authenticate.
|
|
|
9050c69c
|
2019-03-09T17:24:16
|
|
http: examine keepalive status at message end
We cannot examine the keep-alive status of the http parser in
`http_connect`; it's too late and the critical information about whether
keep-alive is supported has been destroyed.
Per the documentation for `http_should_keep_alive`:
> If http_should_keep_alive() in the on_headers_complete or
> on_message_complete callback returns 0, then this should be
> the last message on the connection.
Query then and set the state.
|
|
|
956ba48b
|
2019-03-14T10:36:40
|
|
http: increase the replay count
Increase the permissible replay count; with multiple-step authentication
schemes (NTLM, Negotiate), proxy authentication and redirects, we need
to be mindful of the number of steps it takes to get connected.
7 seems high but can be exhausted quickly with just a single authentication
failure over a redirected multi-state authentication pipeline.
|
|
|
ee3d35cf
|
2019-04-07T19:15:21
|
|
http: support https for proxies
|
|
|
3d11b6c5
|
2019-03-11T20:36:09
|
|
winhttp: support default credentials for proxies
We did not properly support default credentials for proxies, only for
destination servers. Refactor the credential handling to support sending
either username/password _or_ default credentials to either the proxy or
the destination server.
This actually shares the authentication logic between proxy servers and
destination servers. Due to copy/pasta drift over time, they had
diverged. Now they share a common logic which is: first, use
credentials specified in the URL (if there were any), treating empty
username and password (ie, "http://:@foo.com/") as default credentials,
for compatibility with git. Next, call the credential callbacks.
Finally, fallback to WinHTTP compatibility layers using built-in
authentication like we always have.
Allowing default credentials for proxies requires moving the security
level downgrade into the credential setting routines themselves.
We will update our security level to "high" by default which means that
we will never send default credentials without prompting. (A lower
setting, like the WinHTTP default of "medium" would allow WinHTTP to
handle credentials for us, despite what a user may have requested with
their structures.) Now we start with "high" and downgrade to "low" only
after a user has explicitly requested default credentials.
|
|
|
c6ab183e
|
2019-03-11T11:43:08
|
|
net: rename gitno_connection_data to git_net_url
"Connection data" is an imprecise and largely incorrect name; these
structures are actually parsed URLs. Provide a parser that takes a URL
string and produces a URL structure (if it is valid).
Separate the HTTP redirect handling logic from URL parsing, keeping a
`gitno_connection_data_handle_redirect` whose only job is redirect
handling logic and does not parse URLs itself.
|
|
|
7ea8630e
|
2019-04-07T20:11:59
|
|
http: free auth context on failure
When we send HTTP credentials but the server rejects them, tear down the
authentication context so that we can start fresh. To maintain this
state, additionally move all of the authentication handling into
`on_auth_required`.
|
|
|
005b5bc2
|
2019-04-07T17:55:23
|
|
http: reconnect to proxy on connection close
When we're issuing a CONNECT to a proxy, we expect to keep-alive to the
proxy. However, during authentication negotiations, the proxy may close
the connection. Reconnect if the server closes the connection.
|
|
|
d171fbee
|
2019-04-07T17:40:23
|
|
http: allow server to drop a keepalive connection
When we have a keep-alive connection to the server, that server may
legally drop the connection for any reason once a successful request and
response has occurred. It's common for servers to drop the connection
after some amount of time or number of requests have occurred.
|
|
|
9af1de5b
|
2019-03-24T20:49:57
|
|
http: stop on server EOF
We stop the read loop when we have read all the data. We should also
consider the server's feelings.
If the server hangs up on us, we need to stop our read loop. Otherwise,
we'll try to read from the server - and fail - ad infinitum.
|
|
|
539e6293
|
2019-03-22T19:06:46
|
|
http: teach auth mechanisms about connection affinity
Instead of using `is_complete` to decide whether we have connection or
request affinity for authentication mechanisms, set a boolean on the
mechanism definition itself.
|
|
|
3e0b4b43
|
2019-03-22T18:52:03
|
|
http: maintain authentication across connections
For request-based authentication mechanisms (Basic, Digest) we should
keep the authentication context alive across socket connections, since
the authentication headers must be transmitted with every request.
However, we should continue to remove authentication contexts for
mechanisms with connection affinity (NTLM, Negotiate) since we need to
reauthenticate for every socket connection.
|
|
|
ce72ae95
|
2019-03-22T10:53:30
|
|
http: simplify authentication mechanisms
Hold an individual authentication context instead of trying to maintain
all the contexts; we can select the preferred context during the initial
negotiation.
Subsequent authentication steps will re-use the chosen authentication
(until such time as it's rejected) instead of trying to manage multiple
contexts when all but one will never be used (since we can only
authenticate with a single mechanism at a time.)
Also, when we're given a 401 or 407 in the middle of challenge/response
handling, short-circuit immediately without incrementing the retry
count. The multi-step authentication is expected, and not a "retry" and
should not be penalized as such.
This means that we don't need to keep the contexts around and ensures
that we do not unnecessarily fail for too many retries when we have
challenge/response auth on a proxy and a server and potentially
redirects in play as well.
|
|
|
6d931ba7
|
2019-03-22T16:35:59
|
|
http: don't set the header in the auth token
|
|
|
10718526
|
2019-03-09T13:53:16
|
|
http: don't reset replay count after connection
A "connection" to a server is transient, and we may reconnect to a
server in the midst of authentication failures (if the remote indicates
that we should, via `Connection: close`) or in a redirect.
|
|
|
3192e3c9
|
2019-03-07T16:57:11
|
|
http: provide an NTLM authentication provider
|
|
|
79fc8281
|
2019-03-21T16:49:25
|
|
http: validate server's authentication types
Ensure that the server supports the particular credential type that
we're specifying. Previously we considered credential types as an
input to an auth mechanism - since the HTTP transport only supported
default credentials (via negotiate) and username/password credentials
(via basic), this worked. However, if we are to add another mechanism
that uses username/password credentials, we'll need to be careful to
identify the types that are accepted.
|
|
|
5ad99210
|
2019-03-07T16:43:45
|
|
http: consume body on proxy auth failure
We must always consume the full parser body if we're going to
keep-alive. So in the authentication failure case, continue advancing
the http message parser until it's complete, then we can retry the
connection.
Not doing so would mean that we have to tear the connection down and
start over. Advancing through fully (even though we don't use the data)
will ensure that we can retry a connection with keep-alive.
|
|
|
75b20458
|
2019-03-07T16:34:55
|
|
http: always consume body on auth failure
When we get an authentication failure, we must consume the entire body
of the response. If we only read half of the body (on the assumption
that we can ignore the rest) then we will never complete the parsing of
the message. This means that we will never set the complete flag, and
our replay must actually tear down the connection and try again.
This is particularly problematic for stateful authentication mechanisms
(SPNEGO, NTLM) that require that we keep the connection alive.
Note that the prior code is only a problem when the 401 that we are
parsing is too large to be read in a single chunked read from the http
parser.
But now we will continue to invoke the http parser until we've got a
complete message in the authentication failed scenario. Note that we
need not do anything with the message, so when we get an authentication
failed, we'll stop adding data to our buffer, we'll simply loop in the
parser and let it advance its internal state.
|
|
|
e87f912b
|
2019-03-21T15:29:52
|
|
http: don't realloc the request
|
|
|
810cefd9
|
2019-06-08T17:14:00
|
|
credentials: suffix the callbacks with `_cb`
The credential callbacks should match the other callback naming
conventions, using the `_cb` suffix instead of a `_callback` suffix.
|
|
b51789ac
|
2019-04-16T13:20:08
|
|
transports: make use of the `GIT_CONTAINER_OF` macro
|
|
|
59001e83
|
2019-02-21T11:41:19
|
|
remote: rename git_push_transfer_progress callback
The `git_push_transfer_progress` is a callback and as such should be
suffixed with `_cb` for consistency. Rename
`git_push_transfer_progress` to `git_push_transfer_progress_cb`.
|
|
|
a1ef995d
|
2019-02-21T10:33:30
|
|
indexer: use git_indexer_progress throughout
Update internal usage of `git_transfer_progress` to
`git_indexer_progreses`.
|
|
5265b31c
|
2019-01-23T15:00:20
|
|
streams: fix callers potentially only writing partial data
Similar to the write(3) function, implementations of `git_stream_write`
do not guarantee that all bytes are written. Instead, they return the
number of bytes that actually have been written, which may be smaller
than the total number of bytes. Furthermore, due to an interface design
issue, we cannot ever write more than `SSIZE_MAX` bytes at once, as
otherwise we cannot represent the number of bytes written to the caller.
Unfortunately, no caller of `git_stream_write` ever checks the return
value, except to verify that no error occurred. Due to this, they are
susceptible to the case where only partial data has been written.
Fix this by introducing a new function `git_stream__write_full`. In
contrast to `git_stream_write`, it will always return either success or
failure, without returning the number of bytes written. Thus, it is able
to write all `SIZE_MAX` bytes and loop around `git_stream_write` until
all data has been written. Adjust all callers except the BIO callbacks
in our mbedtls and OpenSSL streams, which already do the right thing and
require the amount of bytes written.
|
|
|
4947216f
|
2019-01-21T11:11:27
|
|
git transport: only write INT_MAX bytes
The transport code returns an `int` with the number of bytes written;
thus only attempt to write at most `INT_MAX`.
|
|
bff7aed2
|
2019-01-24T16:44:04
|
|
Don't use deprecated constants
Follow up for PR #4917.
Signed-off-by: Sven Strickroth <email@cs-ware.de>
|
|
|
f673e232
|
2018-12-27T13:47:34
|
|
git_error: use new names in internal APIs and usage
Move to the `git_error` name in the internal API for error-related
functions.
|
|
|
1758636b
|
2019-01-19T01:38:34
|
|
Merge pull request #4939 from libgit2/ethomson/git_ref
Move `git_ref_t` to `git_reference_t`
|
|
|
abe23675
|
2019-01-17T20:09:05
|
|
Merge pull request #4925 from lhchavez/fix-a-bunch-of-warnings
Fix a bunch of warnings
|
|
|
ed8cfbf0
|
2019-01-17T00:32:31
|
|
references: use new names in internal usage
Update internal usage to use the `git_reference` names for constants.
|
|
35d86c77
|
2019-01-14T10:14:36
|
|
proxy: fix crash on remote connection with GIT_PROXY_AUTO but no proxy is detected
|
|
321d19c1
|
2019-01-06T08:36:06
|
|
Windows is hard.
|
|
|
7b453e7e
|
2019-01-05T22:12:48
|
|
Fix a bunch of warnings
This change fixes a bunch of warnings that were discovered by compiling
with `clang -target=i386-pc-linux-gnu`. It turned out that the
intrinsics were not necessarily being used in all platforms! Especially
in GCC, since it does not support __has_builtin.
Some more warnings were gleaned from the Windows build, but I stopped
when I saw that some third-party dependencies (e.g. zlib) have warnings
of their own, so we might never be able to enable -Werror there.
|
|
|
168fe39b
|
2018-11-28T14:26:57
|
|
object_type: use new enumeration names
Use the new object_type enumeration names within the codebase.
|
|
|
30ac46aa
|
2018-11-28T10:12:43
|
|
http: reset replay_count upon connection
Reset the replay_count upon a successful connection. It's possible that
we could encounter a situation where we connect successfully but need to
replay a request - for example, a connection and initial request
succeeds without authentication but a subsequent call does require
authentication. Reset the replay count upon any successful request to
afford subsequent replays room to manuever.
|
|
|
52478d7d
|
2018-11-18T19:54:49
|
|
http: don't allow SSL connections to a proxy
Temporarily disallow SSL connections to a proxy until we can understand
the valgrind warnings when tunneling OpenSSL over OpenSSL.
|
|
|
41f620d9
|
2018-11-18T19:10:50
|
|
http: only load proxy configuration during connection
Only load the proxy configuration during connection; we need this data
when we're going to connect to the server, however we may mutate it
after connection (connecting through a CONNECT proxy means that we
should send requests like normal). If we reload the proxy configuration
but do not actually reconnect (because we're in a keep-alive session)
then we will reload the proxy configuration that we should have mutated.
Thus, only load the proxy configuration when we know that we're going to
reconnect.
|
|
|
0467606f
|
2018-11-18T11:00:11
|
|
http: disallow repeated headers from servers
Don't allow servers to send us multiple Content-Type, Content-Length
or Location headers.
|
|
|
21142c5a
|
2018-10-29T10:04:48
|
|
http: remove cURL
We previously used cURL to support HTTP proxies. Now that we've added
this support natively, we can remove the curl dependency.
|
|
|
5d4e1e04
|
2018-10-28T21:27:56
|
|
http: use CONNECT to talk to proxies
Natively support HTTPS connections through proxies by speaking CONNECT
to the proxy and then adding a TLS connection on top of the socket.
|
|
|
43b592ac
|
2018-10-25T08:49:01
|
|
tls: introduce a wrap function
Introduce `git_tls_stream_wrap` which will take an existing `stream`
with an already connected socket and begin speaking TLS on top of it.
This is useful if you've built a connection to a proxy server and you
wish to begin CONNECT over it to tunnel a TLS connection.
Also update the pluggable TLS stream layer so that it can accept a
registration structure that provides an `init` and `wrap` function,
instead of a single initialization function.
|
|
|
b2ed778a
|
2018-11-18T22:20:10
|
|
http transport: reset error message on cert failure
Store the error message from the underlying TLS library before calling
the certificate callback. If it refuses to act (demonstrated by
returning GIT_PASSTHROUGH) then restore the error message. Otherwise,
if the callback does not set an error message, set a sensible default
that implicates the callback itself.
|
|
|
2ce2315c
|
2018-10-22T17:33:45
|
|
http transport: support cert check for proxies
Refactor certificate checking so that it can easily be called for
proxies or the remote server.
|
|
|
74c6e08e
|
2018-10-22T14:56:53
|
|
http transport: provide proxy credentials
|
|
|
496da38c
|
2018-10-22T12:48:45
|
|
http transport: refactor storage
Create a simple data structure that contains information about the
server being connected to, whether that's the actual remote endpoint
(git server) or an intermediate proxy. This allows for organization of
streams, authentication state, etc.
|
|
|
6af8572c
|
2018-10-22T11:29:01
|
|
http transport: cap number of authentication replays
Put a limit on the number of authentication replays in the HTTP
transport. Standardize on 7 replays for authentication or redirects,
which matches the behavior of the WinHTTP transport.
|
|
|
22654812
|
2018-10-22T11:24:05
|
|
http transport: prompt for proxy credentials
Teach the HTTP transport how to prompt for proxy credentials.
|
|
|
0328eef6
|
2018-10-22T11:14:06
|
|
http transport: further refactor credential handling
Prepare credential handling to understand both git server and proxy
server authentication.
|
|
|
32cb56ce
|
2018-10-22T10:16:54
|
|
http transport: refactor credential handling
Factor credential handling into its own function. Additionally, add
safety checks to ensure that we are in a valid state - that we have
received a valid challenge from the server and that we have
configuration to respond to that challenge.
|
|
|
e6e399ab
|
2018-10-22T09:49:54
|
|
http transport: use HTTP proxies when requested
The HTTP transport should understand how to apply proxies when
configured with `GIT_PROXY_SPECIFIED` and `GIT_PROXY_SPECIFIED`.
When a proxy is configured, the HTTP transport will now connect
to the proxy (instead of directly to the git server), and will
request the properly-formed URL of the git server endpoint.
|
|
|
e6f1931a
|
2018-10-22T00:09:24
|
|
http: rename http subtransport's `io` to `gitserver_stream`
Rename `http_subtransport->io` to `http_subtransport->gitserver_stream`
to clarify its use, especially as we might have additional streams (eg
for a proxy) in the future.
|
|
|
c07ff4cb
|
2018-10-21T14:17:06
|
|
http: rename `connection_data` -> `gitserver_data`
Rename the `connection_data` struct member to `gitserver_data`, to
disambiguate future `connection_data`s that apply to the proxy, not the
final server endpoint.
|
|
|
ed72465e
|
2018-10-13T19:16:54
|
|
proxy: propagate proxy configuration errors
|
|
|
c97d302d
|
2018-11-28T13:45:41
|
|
Merge pull request #4879 from libgit2/ethomson/defer_cert_cred_cb
Allow certificate and credential callbacks to decline to act
|
|
|
a2e6e0ea
|
2018-11-06T14:15:43
|
|
transport: allow cred/cert callbacks to return GIT_PASSTHROUGH
Allow credential and certificate checking callbacks to return
GIT_PASSTHROUGH, indicating that they do not want to act.
Introduce this to support in both the http and ssh callbacks.
Additionally, enable the same mechanism for certificate validation.
This is most useful to disambiguate any meaning in the publicly exposed
credential and certificate functions (`git_transport_smart_credentials`
and `git_transport_smart_certificate_check`) but it may be more
generally useful for callers to be able to defer back to libgit2.
|
|
|
4ef2b889
|
2018-11-18T22:56:28
|
|
Merge pull request #4882 from kc8apf/include_port_in_host_header
transport/http: Include non-default ports in Host header
|
|
|
8ee10098
|
2018-11-06T13:10:30
|
|
transport: see if cert/cred callbacks exist before calling them
Custom transports may want to ask libgit2 to invoke a configured
credential or certificate callback; however they likely do not know if a
callback was actually configured. Return a sentinal value
(GIT_PASSTHROUGH) if there is no callback configured instead of crashing.
|
|
83b35181
|
2018-10-19T10:54:38
|
|
transport/http: Include non-default ports in Host header
When the port is omitted, the server assumes the default port for the
service is used (see
https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Host). In
cases where the client provided a non-default port, it should be passed
along.
This hasn't been an issue so far as the git protocol doesn't include
server-generated URIs. I encountered this when implementing Rust
registry support for Sonatype Nexus. Rust's registry uses a git
repository for the package index. Clients look at a file in the root of
the package index to find the base URL for downloading the packages.
Sonatype Nexus looks at the incoming HTTP request (Host header and URL)
to determine the client-facing URL base as it may be running behind a
load balancer or reverse proxy. This client-facing URL base is then used
to construct the package download base URL. When libgit2 fetches the
index from Nexus on a non-default port, Nexus trusts the incorrect Host
header and generates an incorrect package download base URL.
|
|
|
9ad96367
|
2018-11-07T15:31:21
|
|
smart transport: only clear url on hard reset
After creating a transport for a server, we expect to be able to call
`connect`, then invoke subsequent `action` calls. We provide the URL to
these `action` calls, although our built-in transports happen to ignore
it since they've already parsed it into an internal format that they
intend to use (`gitno_connection_data`).
In ca2eb4608243162a13c427e74526b6422d5a6659, we began clearing the URL
field after a connection, meaning that subsequent calls to transport
`action` callbacks would get a NULL URL, which went undetected since the
builtin transports ignore the URL when they're already connected
(instead of re-parsing it into an internal format).
Downstream custom transport implementations (eg, LibGit2Sharp) did
notice this change, however.
Since `reset_stream` is called even when we're not closing the
subtransport, update to only clear the URL when we're closing the
subtransport. This ensures that `action` calls will get the correct URL
information even after a connection.
|
|
|
2613fbb2
|
2018-10-18T11:58:14
|
|
global: replace remaining use of `git__strtol32`
Replace remaining uses of the `git__strtol32` function. While these uses
are all safe as the strings were either sanitized or from a trusted
source, we want to remove `git__strtol32` altogether to avoid future
misuse.
|
|
9b6e4081
|
2018-10-15T17:08:38
|
|
Merge commit 'afd10f0' (Follow 308 redirects)
|
|
afd10f0b
|
2018-10-13T09:31:20
|
|
Follow 308 redirects (as used by GitLab)
|
|
475db39b
|
2018-10-06T12:58:06
|
|
ignore unsupported http authentication schemes
auth_context_match returns 0 instead of -1 for unknown schemes to
not fail in situations where some authentication schemes are supported
and others are not.
apply_credentials is adjusted to handle auth_context_match returning
0 without producing authentication context.
|
|
|
1bc5b05c
|
2018-10-03T16:17:21
|
|
smart_pkt: do not accept callers passing in no line length
Right now, we simply ignore the `linelen` parameter of
`git_pkt_parse_line` in case the caller passed in zero. But in fact, we
never want to assume anything about the provided buffer length and
always want the caller to pass in the available number of bytes.
And in fact, checking all the callers, one can see that the funciton is
never being called in case where the buffer length is zero, and thus we
are safe to remove this check.
|
|
|
c05790a8
|
2018-08-09T11:16:15
|
|
smart_pkt: return parsed length via out-parameter
The `parse_len` function currently directly returns the parsed length of
a packet line or an error code in case there was an error. Instead,
convert this to our usual style of using the return value as error code
only and returning the actual value via an out-parameter. Thus, we can
now convert the output parameter to an unsigned type, as the size of a
packet cannot ever be negative.
While at it, we also move the check whether the input buffer is long
enough into `parse_len` itself. We don't really want to pass around
potentially non-NUL-terminated buffers to functions without also passing
along the length, as this is dangerous in the unlikely case where other
callers for that function get added. Note that we need to make sure
though to not mess with `GIT_EBUFS` error codes, as these indicate not
an error to the caller but that he needs to fetch more data.
|
|
|
0b3dfbf4
|
2018-08-09T11:13:59
|
|
smart_pkt: reorder and rename parameters of `git_pkt_parse_line`
The parameters of the `git_pkt_parse_line` function are quite confusing.
First, there is no real indicator what the `out` parameter is actually
all about, and it's not really clear what the `bufflen` parameter refers
to. Reorder and rename the parameters to make this more obvious.
|
|
|
5fabaca8
|
2018-08-09T11:04:42
|
|
smart_pkt: fix buffer overflow when parsing "unpack" packets
When checking whether an "unpack" packet returned the "ok" status or
not, we use a call to `git__prefixcmp`. In case where the passed line
isn't properly NUL terminated, though, this may overrun the line buffer.
Fix this by using `git__prefixncmp` instead.
|
|
|
b5ba7af2
|
2018-08-09T11:03:37
|
|
smart_pkt: fix "ng" parser accepting non-space character
When parsing "ng" packets, we blindly assume that the character
immediately following the "ng" prefix is a space and skip it. As the
calling function doesn't make sure that this is the case, we can thus
end up blindly accepting an invalid packet line.
Fix the issue by using `git__prefixncmp`, checking whether the line
starts with "ng ".
|
|
|
a9f1ca09
|
2018-08-09T11:01:00
|
|
smart_pkt: fix buffer overflow when parsing "ok" packets
There are two different buffer overflows present when parsing "ok"
packets. First, we never verify whether the line already ends after
"ok", but directly go ahead and also try to skip the expected space
after "ok". Second, we then go ahead and use `strchr` to scan for the
terminating newline character. But in case where the line isn't
terminated correctly, this can overflow the line buffer.
Fix the issues by using `git__prefixncmp` to check for the "ok " prefix
and only checking for a trailing '\n' instead of using `memchr`. This
also fixes the issue of us always requiring a trailing '\n'.
Reported by oss-fuzz, issue 9749:
Crash Type: Heap-buffer-overflow READ {*}
Crash Address: 0x6310000389c0
Crash State:
ok_pkt
git_pkt_parse_line
git_smart__store_refs
Sanitizer: address (ASAN)
|
|
|
bc349045
|
2018-08-09T10:38:10
|
|
smart_pkt: fix buffer overflow when parsing "ACK" packets
We are being quite lenient when parsing "ACK" packets. First, we didn't
correctly verify that we're not overrunning the provided buffer length,
which we fix here by using `git__prefixncmp` instead of
`git__prefixcmp`. Second, we do not verify that the actual contents make
any sense at all, as we simply ignore errors when parsing the ACKs OID
and any unknown status strings. This may result in a parsed packet
structure with invalid contents, which is being silently passed to the
caller. This is being fixed by performing proper input validation and
checking of return codes.
|
|
|
5edcf5d1
|
2018-08-09T10:57:06
|
|
smart_pkt: adjust style of "ref" packet parsing function
While the function parsing ref packets doesn't have any immediately
obvious buffer overflows, it's style is different to all the other
parsing functions. Instead of checking buffer length while we go, it
does a check up-front. This causes the code to seem a lot more magical
than it really is due to some magic constants. Refactor the function to
instead make use of the style of other packet parser and verify buffer
lengths as we go.
|
|
|
786426ea
|
2018-08-09T10:46:58
|
|
smart_pkt: check whether error packets are prefixed with "ERR "
In the `git_pkt_parse_line` function, we determine what kind of packet
a given packet line contains by simply checking for the prefix of that
line. Except for "ERR" packets, we always only check for the immediate
identifier without the trailing space (e.g. we check for an "ACK"
prefix, not for "ACK "). But for "ERR" packets, we do in fact include
the trailing space in our check. This is not really much of a problem at
all, but it is inconsistent with all the other packet types and thus
causes confusion when the `err_pkt` function just immediately skips the
space without checking whether it overflows the line buffer.
Adjust the check in `git_pkt_parse_line` to not include the trailing
space and instead move it into `err_pkt` for consistency.
|
|
|
40fd84cc
|
2018-08-09T10:46:26
|
|
smart_pkt: explicitly avoid integer overflows when parsing packets
When parsing data, progress or error packets, we need to copy the
contents of the rest of the current packet line into the flex-array of
the parsed packet. To keep track of this array's length, we then assign
the remaining length of the packet line to the structure. We do have a
mismatch of types here, as the structure's `len` field is a signed
integer, while the length that we are assigning has type `size_t`.
On nearly all platforms, this shouldn't pose any problems at all. The
line length can at most be 16^4, as the line's length is being encoded
by exactly four hex digits. But on a platforms with 16 bit integers,
this assignment could cause an overflow. While such platforms will
probably only exist in the embedded ecosystem, we still want to avoid
this potential overflow. Thus, we now simply change the structure's
`len` member to be of type `size_t` to avoid any integer promotion.
|
|
|
4a5804c9
|
2018-08-09T10:36:44
|
|
smart_pkt: honor line length when determining packet type
When we parse the packet type of an incoming packet line, we do not
verify that we don't overflow the provided line buffer. Fix this by
using `git__prefixncmp` instead and passing in `len`. As we have
previously already verified that `len <= linelen`, we thus won't ever
overflow the provided buffer length.
|
|
|
9a193102
|
2018-08-24T11:01:39
|
|
Merge pull request #4774 from tiennou/fix/clang-analyzer
Coverity flavored clang analyzer fixes
|
|
|
1c949ce1
|
2018-08-21T02:11:32
|
|
transport/http: do not return success if we failed to get a scheme
Otherwise we return a NULL context, which will get dereferenced in
apply_credentials.
|
|
50dd7fea
|
2018-08-11T13:06:14
|
|
Fix 'invalid packet line' for ng packets containing errors
|
|
|
9ada072e
|
2018-08-06T13:31:23
|
|
Merge pull request #4758 from pks-t/pks/smart-pkt-oob-read
smart_pkt: fix potential OOB-read when processing ng packet
|
|
|
ba55592f
|
2018-08-02T20:34:56
|
|
Merge pull request #4743 from Agent00Log/dev/winbugfixes
Windows: default credentials / fallback credential handling
|
|
ccbffbae
|
2018-07-30T13:39:21
|
|
Only unitialize if the call to CoInitializeEx was successful
|
|
|
b00a09b0
|
2018-07-27T20:14:27
|
|
Merge pull request #4731 from libgit2/ethomson/wintls_fix
winhttp: retry erroneously failing requests
|
|
|
8c21cb5c
|
2018-07-26T09:52:32
|
|
Fix fallback credentials: The call to CoInitializeEx fails if it was previously been set to a different mode.
|
|
|
c9dc30ff
|
2018-07-26T09:52:21
|
|
Fix default credentials: The WinHttpSetCredentials auth scheme must only be one of the supported schemes.
|
|
|
ca2eb460
|
2018-07-20T21:50:58
|
|
smart subtransport: free url when resetting stream
Free the url field when resetting the stream to avoid leaking it.
|
|
|
dc371e3c
|
2018-07-20T08:20:48
|
|
winhttp: retry erroneously failing requests
Early Windows TLS 1.2 implementations have an issue during key exchange
with OpenSSL implementations that cause negotiation to fail with the
error "the buffer supplied to a function was too small."
This is a transient error on the connection, so when that error is
received, retry up to 5 times to create a connection to the remote
server before actually giving up.
|
|
|
0652abaa
|
2018-07-20T12:56:49
|
|
Merge pull request #4702 from tiennou/fix/coverity
Assorted Coverity fixes
|
|
|
19bed3e2
|
2018-07-19T13:00:42
|
|
smart_pkt: fix potential OOB-read when processing ng packet
OSS-fuzz has reported a potential out-of-bounds read when processing a
"ng" smart packet:
==1==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x6310000249c0 at pc 0x000000493a92 bp 0x7ffddc882cd0 sp 0x7ffddc882480
READ of size 65529 at 0x6310000249c0 thread T0
SCARINESS: 26 (multi-byte-read-heap-buffer-overflow)
#0 0x493a91 in __interceptor_strchr.part.35 /src/llvm/projects/compiler-rt/lib/sanitizer_common/sanitizer_common_interceptors.inc:673
#1 0x813960 in ng_pkt libgit2/src/transports/smart_pkt.c:320:14
#2 0x810f79 in git_pkt_parse_line libgit2/src/transports/smart_pkt.c:478:9
#3 0x82c3c9 in git_smart__store_refs libgit2/src/transports/smart_protocol.c:47:12
#4 0x6373a2 in git_smart__connect libgit2/src/transports/smart.c:251:15
#5 0x57688f in git_remote_connect libgit2/src/remote.c:708:15
#6 0x52e59b in LLVMFuzzerTestOneInput /src/download_refs_fuzzer.cc:145:9
#7 0x52ef3f in ExecuteFilesOnyByOne(int, char**) /src/libfuzzer/afl/afl_driver.cpp:301:5
#8 0x52f4ee in main /src/libfuzzer/afl/afl_driver.cpp:339:12
#9 0x7f6c910db82f in __libc_start_main /build/glibc-Cl5G7W/glibc-2.23/csu/libc-start.c:291
#10 0x41d518 in _start
When parsing an "ng" packet, we keep track of both the current position
as well as the remaining length of the packet itself. But instead of
taking care not to exceed the length, we pass the current pointer's
position to `strchr`, which will search for a certain character until
hitting NUL. It is thus possible to create a crafted packet which
doesn't contain a NUL byte to trigger an out-of-bounds read.
Fix the issue by instead using `memchr`, passing the remaining length as
restriction. Furthermore, verify that we actually have enough bytes left
to produce a match at all.
OSS-Fuzz-Issue: 9406
|
|
|
fa401a32
|
2018-07-19T08:20:04
|
|
Merge pull request #4704 from nelhage/no-pkt-pack
Remove GIT_PKT_PACK entirely
|
|
388149f5
|
2018-07-15T17:25:26
|
|
No need for this placeholder.
|
|
|
9994cd3f
|
2018-06-25T11:56:52
|
|
treewide: remove use of C++ style comments
C++ style comment ("//") are not specified by the ISO C90 standard and
thus do not conform to it. While libgit2 aims to conform to C90, we did
not enforce it until now, which is why quite a lot of these
non-conforming comments have snuck into our codebase. Do a tree-wide
conversion of all C++ style comments to the supported C style comments
to allow us enforcing strict C90 compliance in a later commit.
|