kmx git

Commit	Date	Message
c576d4ff	2017-02-13T12:46:00	Merge pull request #4115 from gsaralms/users/gsaral/optionalOfsDelta Changes to provide option to turn off/on ofs_delta
c5f3da96	2016-11-11T14:36:43	repository: use `git_repository_item_path` The recent introduction of the commondir variable of a repository requires callers to distinguish whether their files are part of the dot-git directory or the common directory shared between multpile worktrees. In order to take the burden from callers and unify knowledge on which files reside where, the `git_repository_item_path` function has been introduced which encapsulate this knowledge. Modify most existing callers of `git_repository_path` to use `git_repository_item_path` instead, thus making them implicitly aware of the common directory.
61acc9fa	2017-02-08T16:22:44	Changes to provide option to turn off/on ofs_delta This change provides an option in git_libgit2_opt_t which can be used in git_libgit2_opts to turn off/on ofs_delta capability in libGit2
1e929eb5	2017-02-06T11:00:06	Pass proxy options payload to credentials callback
fa2dfcf9	2017-02-01T09:28:30	Fix digest credentials for proxy in windows
1910a04a	2016-12-30T12:42:42	winhttp: set proper cert failure error messages Set up a WinHTTP status callback; inspect the WinHTTP status for WINHTTP_CALLBACK_STATUS_SECURE_FAILURE, and convert the status code to a useful message for callers.
4e4a1460	2016-12-30T12:13:34	WinHTTP: support best auth mechanism For username/password credentials, support NTLM or Basic (in that order of priority). Use the WinHTTP built-in authentication support for both, and maintain a bitfield of the supported mechanisms from the response.
a6d833a2	2017-01-13T17:05:58	Merge pull request #4049 from libgit2/ethomson/error_msgs giterr_set: consistent error messages
6850b516	2017-01-06T17:12:16	Merge branch '25_smartpktparse' into maint/v0.25
2fdef641	2016-11-15T11:44:51	smart_pkt: treat empty packet lines as error The Git protocol does not specify what should happen in the case of an empty packet line (that is a packet line "0004"). We currently indicate success, but do not return a packet in the case where we hit an empty line. The smart protocol was not prepared to handle such packets in all cases, though, resulting in a `NULL` pointer dereference. Fix the issue by returning an error instead. As such kind of packets is not even specified by upstream, this is the right thing to do.
66e3774d	2016-11-15T11:36:27	smart_pkt: verify packet length exceeds PKT_LEN_SIZE Each packet line in the Git protocol is prefixed by a four-byte length of how much data will follow, which we parse in `git_pkt_parse_line`. The transmitted length can either be equal to zero in case of a flush packet or has to be at least of length four, as it also includes the encoded length itself. Not checking this may result in a buffer overflow as we directly pass the length to functions which accept a `size_t` length as parameter. Fix the issue by verifying that non-flush packets have at least a length of `PKT_LEN_SIZE`.
9a64e62f	2016-12-21T21:24:33	http: check certificate validity before clobbering the error variable
909d5494	2016-12-29T12:25:15	giterr_set: consistent error messages Error messages should be sentence fragments, and therefore: 1. Should not begin with a capital letter, 2. Should not conclude with punctuation, and 3. Should not end a sentence and begin a new one
fafafb1f	2016-12-20T16:19:30	http: bump the pretend git version in the User-Agent We want to keep the git UA in order for services to recognise that we're a Git client and not a browser. But in order to stop dumb HTTP some services have blocked UAs that claim to be pre-1.6.6 git. Thread these needles by using the "git/2.0" prefix which is still close enough to git's yet distinct enough that you can tell it's us.
34b32053	2016-11-25T15:02:34	Fix potential use of uninitialized values
482d1748	2016-11-25T15:01:35	transports: smart: do not redeclare loop counters
62494bf2	2016-11-02T09:38:40	transports: smart: abort receiving packets on end of stream When trying to receive packets from the remote, we loop until either an error distinct to `GIT_EBUFS` occurs or until we successfully parsed the packet. This does not honor the case where we are looping over an already closed socket which has no more data, leaving us in an infinite loop if we got a bogus packet size or if the remote hang up. Fix the issue by returning `GIT_EEOF` when we cannot read data from the socket anymore.
61530c49	2016-11-01T16:56:07	transports: smart: abort ref announcement on early end of stream When reading a server's reference announcements via the smart protocol, we expect the server to send multiple flushes before the protocol is finished. If we fail to receive new data from the socket, we will only return an end of stream error if we have not seen any flush yet. This logic is flawed in that we may run into an infinite loop when receiving a server's reference announcement with a bogus flush packet. E.g. assume the last flushing package is changed to not be '0000' but instead any other value. In this case, we will still await one more flush package and ignore the fact that we are not receiving any data from the socket, causing an infinite loop. Fix the issue by always returning `GIT_EEOF` if the socket indicates an end of stream.
b1453601	2016-08-17T11:38:26	transports: http: reset `connected` flag when closing transport
c4cba4e9	2016-08-17T11:00:05	transports: http: reset `connected` flag when re-connecting transport When calling `http_connect` on a subtransport whose stream is already connected, we first close the stream in case no keep-alive is in use. When doing so, we do not reset the transport's connection state, though. Usually, this will do no harm in case the subsequent connect will succeed. But when the connection fails we are left with a substransport which is tagged as connected but which has no valid stream attached. Fix the issue by resetting the subtransport's connected-state when closing its stream in `http_connect`.
bdec62dc	2016-07-06T13:06:25	remove conditions that prevent use of custom TLS stream
6c9eb86f	2016-06-19T11:46:43	HTTP authentication scheme name is case insensitive.
2a09de91	2016-06-14T04:33:55	Merge pull request #3816 from pks-t/pks/memory-leaks Memory leak fixes
43c55111	2016-06-07T14:14:07	winhttp: plug several memory leaks
7d02019a	2016-06-06T12:59:17	transports: smart: fix potential invalid memory dereferences When we receive a packet of exactly four bytes encoding its length as those four bytes it can be treated as an empty line. While it is not really specified how those empty lines should be treated, we currently ignore them and do not return an error when trying to parse it but simply advance the data pointer. Callers invoking `git_pkt_parse_line` are currently not prepared to handle this case as they do not explicitly check this case. While they could always reset the passed out-pointer to `NULL` before calling `git_pkt_parse_line` and determine if the pointer has been set afterwards, it makes more sense to update `git_pkt_parse_line` to set the out-pointer to `NULL` itself when it encounters such an empty packet. Like this it is guaranteed that there will be no invalid memory references to free'd pointers. As such, the issue has been fixed such that `git_pkt_parse_line` always sets the packet out pointer to `NULL` when an empty packet has been received and callers check for this condition, skipping such packets.
375bb2fe	2016-04-21T11:02:31	transport: cast away constness for free
0d72f67f	2016-03-14T17:36:04	proxy: don't specify the protocol in the type We leave this up to the scheme in the url field. The type should only tell us about whether we want a proxy and whether we want to auto-detect it.
bf6f7ad2	2015-09-30T17:42:53	winhttp: correctly detect HTTPS usage
b373e9a6	2015-09-21T22:38:50	net: use proxy options struct in the stream config
22e6aa0d	2015-09-23T04:39:05	proxy: don't require the trailing slash on WinHTTP The path is not something that you use for proxies, so make use of the new optionality of the path when extracting URL parts.
b117721d	2015-07-29T21:23:56	proxy: use poxy to test our Windows proxy support
07bd3e57	2015-05-07T12:57:56	proxy: ask the user for credentials if necessary
d4763c98	2016-03-24T06:56:25	Merge pull request #3574 from chescock/buffer-sideband-pack-data Buffer sideband packet data
9028a8a2	2016-03-08T10:16:37	Only buffer if necessary.
b7809b84	2016-03-08T13:38:55	Merge pull request #3555 from cbargren/ssh-git-protocols Support for ssh+git and git+ssh protocols
22f3d3aa	2016-03-03T22:26:31	ssh: initialize libssh2 We should have been doing this, but it initializes itself upon first use, which works as long as nobody's doing concurrent network operations. Initialize it on our init to make sure it's not getting initialized concurrently.
a4cba9d4	2016-03-03T10:48:24	winhttp: retry authentication If the caller has provided bad authentication, give them another apportunity to get it right until they give up. This brings WinHTTP in line with the other transports.
003c5e46	2016-02-22T15:52:49	transports: smart_pkt: fix memory leaks on error paths
6e2a3755	2016-02-23T11:45:43	smart_pkt: check buffer with GITERR_CHECK_ALLOC_BUF
b0f7512f	2016-02-15T11:46:10	transports: smart_pkt: fix memory leaks
704554cd	2016-02-15T11:37:48	transports: smart: fix memory leak on OOM path
9ce0399c	2016-02-12T10:27:05	winhttp: use an unsigned iterator
5c7f2f01	2016-01-19T11:13:23	winhttp: name mangle class / iid on mingw Standard Windows type systems define CLSID_InternetSecurityManager and IID_IInternetSecurityManager, but MinGW lacks these definitions. As a result, we must hardcode these definitions ourselves. However, we should not use a public struct with those names, lest another library do the same thing and consumers cannot link to both.
a7d9d93d	2016-01-11T17:09:32	Buffer sideband packet data The inner packet may be split across multiple sideband packets.
4df17045	2015-12-28T07:43:24	Removing #define for SSH_PREFIX_COUNT and using ARRAY_SIZE instead Also moving var declarations to top of blocks to support bad old compilers
02fdc2db	2015-12-26T17:17:05	ssh_stream_read(): fix possible bytes_read < 0 branch Fix the possibility of returning successfully from ssh_stream_read() with bytes_read < 0. This would occur if stdout channel read resulted in 0, and stderr channel read failed afterwards.
ed21fd74	2015-12-22T10:38:31	Handle git+ssh:// and ssh+git:// protocols support
efd9ab56	2015-11-20T11:26:26	Treat GIT_PASSTHROUGH as though git_cred_acquire_cb isn't set.
1411cb9e	2015-10-02T03:57:14	winhttp: use a custom user-agent if the user has set it We also keep the "git/1.0" prefix in order to maintain compatibility with hosters.
94bac76c	2015-10-02T03:46:34	http: use a custom user-agent if the user has set it We still prefix it with "git/1.0" since that's required in many situations, but we replace the area which mentions libgit2.
e0be1d60	2015-10-30T18:23:17	git: put NULL check at the top
45d295e0	2015-10-30T17:51:50	git: accept NULL as argument to its stream free
72b7c570	2015-09-30T09:17:18	Merge pull request #3411 from spraints/custom-push-headers Include custom HTTP headers
d7375662	2015-09-25T10:16:16	Copy custom_headers insteach of referencing the caller's copy
d16c1b97	2015-09-24T10:30:37	These can be static
e60db3c7	2015-09-24T09:24:10	Revise custom header error messages If the header doesn't look like a header (e.g. if it doesn't have a ":" or if it has newlines), report "custom HTTP header '%s' is malformed". If the header has the same name as a header already set by libgit2 (e.g. "Host"), report "HTTP header '%s' is already set by libgit2".
63cc5723	2015-09-24T09:13:05	Don't null-check
098f1e6e	2015-09-24T09:09:48	Use an array of forbidden custom headers
3245896b	2015-09-10T13:18:26	Add a test for custom header validation Also, some custom headers actually are valid.
66d90e70	2015-09-10T09:14:20	More specific names
8c876fa9	2015-09-10T09:11:16	Validate custom http headers
35969c68	2015-09-10T08:58:23	Ignore NULL headers
6c21211c	2015-09-09T13:59:38	Merge pull request #3379 from theseion/additional_libssh2_error_reporting report libssh2 error if list of authentication methods can't be retrieved
c82c2ba6	2015-09-08T14:17:59	o i
80ee2543	2015-09-08T13:38:22	Teach winhttp about the extra headers
276f6aa0	2015-09-08T14:00:37	Hook up the custom_headers to the http transport
24f5b4e1	2015-09-08T13:34:42	Drop extra_http_headers from git_remote
59d6128e	2015-09-04T09:36:50	Allow the world to set HTTP headers for remotes
ac9b5127	2015-09-04T09:20:45	Pull extra_http_headers from the git_remote
6af6e690	2015-09-04T09:18:32	Put the extra headers on the connection_data instead
c3733e56	2015-09-04T08:56:26	Add more headers to HTTP requests
19475924	2015-08-25T00:39:58	Merge pull request #3355 from palmin/palmin/fix-2830 Include the 4 characters not recognised as hex-number in parse_len
57af0b92	2015-08-19T00:46:28	cred: add a free function wrapper
47ed7e5a	2015-08-18T20:55:59	transport: provide a way to get the callbacks libgit2 implementations of smart subtransports can simply reach through the structure, but external implementors cannot. Add these two functions as a way for the smart subtransports to get the callbacks as set by the user.
2d1d2bb5	2015-08-05T18:50:25	Include the 4 characters not recognised as hex-number when setting error in parse_len
252f86e1	2015-08-15T13:46:32	Merge pull request #3377 from dleehr/fix-push-cb Fix bug in git_smart__push: push_transfer_progress cb is only called at end
11bca2d2	2015-08-15T18:15:23	http: propagate the credentials callback's error code When we ask for credentials, the user may choose to return EUSER to indicate that an error has happened on its end and it wants to be given back control. We must therefore pass that back to the user instead of mentioning that it was on_headers_complete() that returned an error code. Since we can, we return the exact error code from the user (other than PASSTHROUGH) since it doesn't cost anything, though using other error codes aren't recommended.
241414ee	2015-08-14T15:42:59	added a single line of additional error reporting from libssh2 when failing to retrieve the list of authentication methods
b0b2c722	2015-08-13T22:52:52	Fix bug in git_smart__push: push_transfer_progress cb is never called The conditional checked cbs->transfer_progress then used the value in cbs->push_transfer_progress. In both cases it should be push_transfer_progress
ac728c24	2015-08-03T07:38:07	Handle ssh:// and git:// urls containing a '~' character. For such a path '/~/...' the leading '/' is stripped so the server will get a path starting with '~' and correctly handle it.
31a76374	2015-07-29T22:23:00	case-insensitive check for WWW-Authenticate header Fixes issue #3338
f861abad	2015-07-12T19:56:19	Merge branch 'portable-zu'
768f8be3	2015-06-30T19:00:41	Fix #3094 - improve use of portable size_t/ssize_t format specifiers. The header src/cc-compat.h defines portable format specifiers PRIuZ, PRIdZ, and PRIxZ. The original report highlighted the need to use these specifiers in examples/network/fetch.c. For this commit, I checked all C source and header files not in deps/ and transitioned to the appropriate format specifier where appropriate.
79698030	2015-06-29T22:51:18	git_cert: child types use proper base type
2f60073d	2015-06-30T21:40:20	Merge pull request #3273 from ethomson/warnings3 More warnings
1630981e	2015-06-30T09:03:23	http: fixed leak when asking for credentials again t->cred might have been allocated the previous time and needs to be freed before asking caller for credentials again.
0305721c	2015-06-30T14:23:41	winhttp: remove unused var
8b380060	2015-06-29T21:12:44	http: don't give up on auth on the first try When the server rejects an authentication request, ask the caller for the credentials again, instead of giving up on the first try.
8443f492	2015-06-11T16:57:04	curl: remove the encrypted param to the constructor We do not want libcurl to perform the TLS negotiation for us, so we don't need to pass this option.
f97d5d09	2015-06-11T16:54:48	http: ask for the curl stream for non-encrypted connections The TLS streams talk over the curl stream themselves, so we don't need to ask for it explicitly. Do so in the case of the non-encrypted one so we can still make use proxies in that case.
8762d721	2015-06-07T14:51:10	http: set the proxy if the stream supports it Of the built-in ones, only cURL support it, but there's no reason a user-provided stream wouldn't support it.
8dea1c21	2015-06-05T11:02:11	Implement a curl stream cURL has a mode in which it acts a lot like our streams, providing send and recv functions and taking care of the TLS and proxy setup for us. Implement a new stream which uses libcurl instead of raw sockets or the TLS libraries directly. This version does not support reporting certificates or proxies yet.
a166466c	2015-06-09T17:06:28	Merge pull request #3198 from libgit2/cmn/coverity A few fixes from Coverity
81be2f46	2015-06-09T16:01:29	ssh: move NULL check to the free function Let `ssh_stream_free()` take a NULL stream, as free functions should, and remove the check from the connection setup. The connection setup would not need the check anyhow, as we always have a stream by the time we reach this code.
fdb82dcd	2015-06-07T15:10:13	Merge pull request #3175 from git-up/build_warnings Fixed build warnings on Xcode 6.1
9f3c18e2	2015-06-02T08:36:15	Fixed build warnings on Xcode 6.1
d71e3b25	2015-06-02T10:23:54	Change error when running out of ssh agent keys
2629fc87	2015-05-24T22:33:55	cred: Check for null values when getting key from memory The public key field is optional and as such can take NULL. Account for that and do not call strlen() on NULL values. Also assert() for non-NULL values of username & private key.
f7142b5e	2015-05-24T18:38:47	cred: Declare GIT_CREDTYPE_SSH_MEMORY unconditionally Declare GIT_CREDTYPE_SSH_MEMORY to have consistent API independently of whether libgit2 was built with or without in-memory key passing support. Or rather, to have it at all since build-time definitions are not stored in headers.
08e6b875	2015-03-19T14:57:15	Return an error when ssh memory credentials are not supported. To not modify the external api.

c576d4ff

2017-02-13T12:46:00

Merge pull request #4115 from gsaralms/users/gsaral/optionalOfsDelta Changes to provide option to turn off/on ofs_delta

c5f3da96

2016-11-11T14:36:43

repository: use `git_repository_item_path` The recent introduction of the commondir variable of a repository requires callers to distinguish whether their files are part of the dot-git directory or the common directory shared between multpile worktrees. In order to take the burden from callers and unify knowledge on which files reside where, the `git_repository_item_path` function has been introduced which encapsulate this knowledge. Modify most existing callers of `git_repository_path` to use `git_repository_item_path` instead, thus making them implicitly aware of the common directory.

61acc9fa

2017-02-08T16:22:44

Changes to provide option to turn off/on ofs_delta This change provides an option in git_libgit2_opt_t which can be used in git_libgit2_opts to turn off/on ofs_delta capability in libGit2

1e929eb5

2017-02-06T11:00:06

Pass proxy options payload to credentials callback

fa2dfcf9

2017-02-01T09:28:30

Fix digest credentials for proxy in windows

1910a04a

2016-12-30T12:42:42

winhttp: set proper cert failure error messages Set up a WinHTTP status callback; inspect the WinHTTP status for WINHTTP_CALLBACK_STATUS_SECURE_FAILURE, and convert the status code to a useful message for callers.

4e4a1460

2016-12-30T12:13:34

WinHTTP: support best auth mechanism For username/password credentials, support NTLM or Basic (in that order of priority). Use the WinHTTP built-in authentication support for both, and maintain a bitfield of the supported mechanisms from the response.

a6d833a2

2017-01-13T17:05:58

Merge pull request #4049 from libgit2/ethomson/error_msgs giterr_set: consistent error messages

6850b516

2017-01-06T17:12:16

Merge branch '25_smartpktparse' into maint/v0.25

2fdef641

2016-11-15T11:44:51

smart_pkt: treat empty packet lines as error The Git protocol does not specify what should happen in the case of an empty packet line (that is a packet line "0004"). We currently indicate success, but do not return a packet in the case where we hit an empty line. The smart protocol was not prepared to handle such packets in all cases, though, resulting in a `NULL` pointer dereference. Fix the issue by returning an error instead. As such kind of packets is not even specified by upstream, this is the right thing to do.

66e3774d

2016-11-15T11:36:27

smart_pkt: verify packet length exceeds PKT_LEN_SIZE Each packet line in the Git protocol is prefixed by a four-byte length of how much data will follow, which we parse in `git_pkt_parse_line`. The transmitted length can either be equal to zero in case of a flush packet or has to be at least of length four, as it also includes the encoded length itself. Not checking this may result in a buffer overflow as we directly pass the length to functions which accept a `size_t` length as parameter. Fix the issue by verifying that non-flush packets have at least a length of `PKT_LEN_SIZE`.

9a64e62f

2016-12-21T21:24:33

http: check certificate validity before clobbering the error variable

909d5494

2016-12-29T12:25:15

giterr_set: consistent error messages Error messages should be sentence fragments, and therefore: 1. Should not begin with a capital letter, 2. Should not conclude with punctuation, and 3. Should not end a sentence and begin a new one

fafafb1f

2016-12-20T16:19:30

http: bump the pretend git version in the User-Agent We want to keep the git UA in order for services to recognise that we're a Git client and not a browser. But in order to stop dumb HTTP some services have blocked UAs that claim to be pre-1.6.6 git. Thread these needles by using the "git/2.0" prefix which is still close enough to git's yet distinct enough that you can tell it's us.

34b32053

2016-11-25T15:02:34

Fix potential use of uninitialized values

482d1748

2016-11-25T15:01:35

transports: smart: do not redeclare loop counters

62494bf2

2016-11-02T09:38:40

transports: smart: abort receiving packets on end of stream When trying to receive packets from the remote, we loop until either an error distinct to `GIT_EBUFS` occurs or until we successfully parsed the packet. This does not honor the case where we are looping over an already closed socket which has no more data, leaving us in an infinite loop if we got a bogus packet size or if the remote hang up. Fix the issue by returning `GIT_EEOF` when we cannot read data from the socket anymore.

61530c49

2016-11-01T16:56:07

transports: smart: abort ref announcement on early end of stream When reading a server's reference announcements via the smart protocol, we expect the server to send multiple flushes before the protocol is finished. If we fail to receive new data from the socket, we will only return an end of stream error if we have not seen any flush yet. This logic is flawed in that we may run into an infinite loop when receiving a server's reference announcement with a bogus flush packet. E.g. assume the last flushing package is changed to not be '0000' but instead any other value. In this case, we will still await one more flush package and ignore the fact that we are not receiving any data from the socket, causing an infinite loop. Fix the issue by always returning `GIT_EEOF` if the socket indicates an end of stream.

b1453601

2016-08-17T11:38:26

transports: http: reset `connected` flag when closing transport

c4cba4e9

2016-08-17T11:00:05

transports: http: reset `connected` flag when re-connecting transport When calling `http_connect` on a subtransport whose stream is already connected, we first close the stream in case no keep-alive is in use. When doing so, we do not reset the transport's connection state, though. Usually, this will do no harm in case the subsequent connect will succeed. But when the connection fails we are left with a substransport which is tagged as connected but which has no valid stream attached. Fix the issue by resetting the subtransport's connected-state when closing its stream in `http_connect`.

bdec62dc

2016-07-06T13:06:25

remove conditions that prevent use of custom TLS stream

6c9eb86f

2016-06-19T11:46:43

HTTP authentication scheme name is case insensitive.

2a09de91

2016-06-14T04:33:55

Merge pull request #3816 from pks-t/pks/memory-leaks Memory leak fixes

43c55111

2016-06-07T14:14:07

winhttp: plug several memory leaks

7d02019a

2016-06-06T12:59:17

transports: smart: fix potential invalid memory dereferences When we receive a packet of exactly four bytes encoding its length as those four bytes it can be treated as an empty line. While it is not really specified how those empty lines should be treated, we currently ignore them and do not return an error when trying to parse it but simply advance the data pointer. Callers invoking `git_pkt_parse_line` are currently not prepared to handle this case as they do not explicitly check this case. While they could always reset the passed out-pointer to `NULL` before calling `git_pkt_parse_line` and determine if the pointer has been set afterwards, it makes more sense to update `git_pkt_parse_line` to set the out-pointer to `NULL` itself when it encounters such an empty packet. Like this it is guaranteed that there will be no invalid memory references to free'd pointers. As such, the issue has been fixed such that `git_pkt_parse_line` always sets the packet out pointer to `NULL` when an empty packet has been received and callers check for this condition, skipping such packets.

375bb2fe

2016-04-21T11:02:31

transport: cast away constness for free

0d72f67f

2016-03-14T17:36:04

proxy: don't specify the protocol in the type We leave this up to the scheme in the url field. The type should only tell us about whether we want a proxy and whether we want to auto-detect it.

bf6f7ad2

2015-09-30T17:42:53

winhttp: correctly detect HTTPS usage

b373e9a6

2015-09-21T22:38:50

net: use proxy options struct in the stream config

22e6aa0d

2015-09-23T04:39:05

proxy: don't require the trailing slash on WinHTTP The path is not something that you use for proxies, so make use of the new optionality of the path when extracting URL parts.

b117721d

2015-07-29T21:23:56

proxy: use poxy to test our Windows proxy support

07bd3e57

2015-05-07T12:57:56

proxy: ask the user for credentials if necessary

d4763c98

2016-03-24T06:56:25

Merge pull request #3574 from chescock/buffer-sideband-pack-data Buffer sideband packet data

9028a8a2

2016-03-08T10:16:37

Only buffer if necessary.

b7809b84

2016-03-08T13:38:55

Merge pull request #3555 from cbargren/ssh-git-protocols Support for ssh+git and git+ssh protocols

22f3d3aa

2016-03-03T22:26:31

ssh: initialize libssh2 We should have been doing this, but it initializes itself upon first use, which works as long as nobody's doing concurrent network operations. Initialize it on our init to make sure it's not getting initialized concurrently.

a4cba9d4

2016-03-03T10:48:24

winhttp: retry authentication If the caller has provided bad authentication, give them another apportunity to get it right until they give up. This brings WinHTTP in line with the other transports.

003c5e46

2016-02-22T15:52:49

transports: smart_pkt: fix memory leaks on error paths

6e2a3755

2016-02-23T11:45:43

smart_pkt: check buffer with GITERR_CHECK_ALLOC_BUF

b0f7512f

2016-02-15T11:46:10

transports: smart_pkt: fix memory leaks

704554cd

2016-02-15T11:37:48

transports: smart: fix memory leak on OOM path

9ce0399c

2016-02-12T10:27:05

winhttp: use an unsigned iterator

5c7f2f01

2016-01-19T11:13:23

winhttp: name mangle class / iid on mingw Standard Windows type systems define CLSID_InternetSecurityManager and IID_IInternetSecurityManager, but MinGW lacks these definitions. As a result, we must hardcode these definitions ourselves. However, we should not use a public struct with those names, lest another library do the same thing and consumers cannot link to both.

a7d9d93d

2016-01-11T17:09:32

Buffer sideband packet data The inner packet may be split across multiple sideband packets.

4df17045

2015-12-28T07:43:24

Removing #define for SSH_PREFIX_COUNT and using ARRAY_SIZE instead Also moving var declarations to top of blocks to support bad old compilers

02fdc2db

2015-12-26T17:17:05

ssh_stream_read(): fix possible *bytes_read < 0 branch Fix the possibility of returning successfully from ssh_stream_read() with *bytes_read < 0. This would occur if stdout channel read resulted in 0, and stderr channel read failed afterwards.

ed21fd74

2015-12-22T10:38:31

Handle git+ssh:// and ssh+git:// protocols support

efd9ab56

2015-11-20T11:26:26

Treat GIT_PASSTHROUGH as though git_cred_acquire_cb isn't set.

1411cb9e

2015-10-02T03:57:14

winhttp: use a custom user-agent if the user has set it We also keep the "git/1.0" prefix in order to maintain compatibility with hosters.

94bac76c

2015-10-02T03:46:34

http: use a custom user-agent if the user has set it We still prefix it with "git/1.0" since that's required in many situations, but we replace the area which mentions libgit2.

e0be1d60

2015-10-30T18:23:17

git: put NULL check at the top

45d295e0

2015-10-30T17:51:50

git: accept NULL as argument to its stream free

72b7c570

2015-09-30T09:17:18

Merge pull request #3411 from spraints/custom-push-headers Include custom HTTP headers

d7375662

2015-09-25T10:16:16

Copy custom_headers insteach of referencing the caller's copy

d16c1b97

2015-09-24T10:30:37

These can be static

e60db3c7

2015-09-24T09:24:10

Revise custom header error messages If the header doesn't look like a header (e.g. if it doesn't have a ":" or if it has newlines), report "custom HTTP header '%s' is malformed". If the header has the same name as a header already set by libgit2 (e.g. "Host"), report "HTTP header '%s' is already set by libgit2".

63cc5723

2015-09-24T09:13:05

Don't null-check

098f1e6e

2015-09-24T09:09:48

Use an array of forbidden custom headers

3245896b

2015-09-10T13:18:26

Add a test for custom header validation Also, *some* custom headers actually are valid.

66d90e70

2015-09-10T09:14:20

More specific names

8c876fa9

2015-09-10T09:11:16

Validate custom http headers

35969c68

2015-09-10T08:58:23

Ignore NULL headers

6c21211c

2015-09-09T13:59:38

Merge pull request #3379 from theseion/additional_libssh2_error_reporting report libssh2 error if list of authentication methods can't be retrieved

c82c2ba6

2015-09-08T14:17:59

o i

80ee2543

2015-09-08T13:38:22

Teach winhttp about the extra headers

276f6aa0

2015-09-08T14:00:37

Hook up the custom_headers to the http transport

24f5b4e1

2015-09-08T13:34:42

Drop extra_http_headers from git_remote

59d6128e

2015-09-04T09:36:50

Allow the world to set HTTP headers for remotes

ac9b5127

2015-09-04T09:20:45

Pull extra_http_headers from the git_remote

6af6e690

2015-09-04T09:18:32

Put the extra headers on the connection_data instead

c3733e56

2015-09-04T08:56:26

Add more headers to HTTP requests

19475924

2015-08-25T00:39:58

Merge pull request #3355 from palmin/palmin/fix-2830 Include the 4 characters not recognised as hex-number in parse_len

57af0b92

2015-08-19T00:46:28

cred: add a free function wrapper

47ed7e5a

2015-08-18T20:55:59

transport: provide a way to get the callbacks libgit2 implementations of smart subtransports can simply reach through the structure, but external implementors cannot. Add these two functions as a way for the smart subtransports to get the callbacks as set by the user.

2d1d2bb5

2015-08-05T18:50:25

Include the 4 characters not recognised as hex-number when setting error in parse_len

252f86e1

2015-08-15T13:46:32

Merge pull request #3377 from dleehr/fix-push-cb Fix bug in git_smart__push: push_transfer_progress cb is only called at end

11bca2d2

2015-08-15T18:15:23

http: propagate the credentials callback's error code When we ask for credentials, the user may choose to return EUSER to indicate that an error has happened on its end and it wants to be given back control. We must therefore pass that back to the user instead of mentioning that it was on_headers_complete() that returned an error code. Since we can, we return the exact error code from the user (other than PASSTHROUGH) since it doesn't cost anything, though using other error codes aren't recommended.

241414ee

2015-08-14T15:42:59

added a single line of additional error reporting from libssh2 when failing to retrieve the list of authentication methods

b0b2c722

2015-08-13T22:52:52

Fix bug in git_smart__push: push_transfer_progress cb is never called The conditional checked cbs->transfer_progress then used the value in cbs->push_transfer_progress. In both cases it should be push_transfer_progress

ac728c24

2015-08-03T07:38:07

Handle ssh:// and git:// urls containing a '~' character. For such a path '/~/...' the leading '/' is stripped so the server will get a path starting with '~' and correctly handle it.

31a76374

2015-07-29T22:23:00

case-insensitive check for WWW-Authenticate header Fixes issue #3338

f861abad

2015-07-12T19:56:19

Merge branch 'portable-zu'

768f8be3

2015-06-30T19:00:41

Fix #3094 - improve use of portable size_t/ssize_t format specifiers. The header src/cc-compat.h defines portable format specifiers PRIuZ, PRIdZ, and PRIxZ. The original report highlighted the need to use these specifiers in examples/network/fetch.c. For this commit, I checked all C source and header files not in deps/ and transitioned to the appropriate format specifier where appropriate.

79698030

2015-06-29T22:51:18

git_cert: child types use proper base type

2f60073d

2015-06-30T21:40:20

Merge pull request #3273 from ethomson/warnings3 More warnings

1630981e

2015-06-30T09:03:23

http: fixed leak when asking for credentials again t->cred might have been allocated the previous time and needs to be freed before asking caller for credentials again.

0305721c

2015-06-30T14:23:41

winhttp: remove unused var

8b380060

2015-06-29T21:12:44

http: don't give up on auth on the first try When the server rejects an authentication request, ask the caller for the credentials again, instead of giving up on the first try.

8443f492

2015-06-11T16:57:04

curl: remove the encrypted param to the constructor We do not want libcurl to perform the TLS negotiation for us, so we don't need to pass this option.

f97d5d09

2015-06-11T16:54:48

http: ask for the curl stream for non-encrypted connections The TLS streams talk over the curl stream themselves, so we don't need to ask for it explicitly. Do so in the case of the non-encrypted one so we can still make use proxies in that case.

8762d721

2015-06-07T14:51:10

http: set the proxy if the stream supports it Of the built-in ones, only cURL support it, but there's no reason a user-provided stream wouldn't support it.

8dea1c21

2015-06-05T11:02:11

Implement a curl stream cURL has a mode in which it acts a lot like our streams, providing send and recv functions and taking care of the TLS and proxy setup for us. Implement a new stream which uses libcurl instead of raw sockets or the TLS libraries directly. This version does not support reporting certificates or proxies yet.

a166466c

2015-06-09T17:06:28

Merge pull request #3198 from libgit2/cmn/coverity A few fixes from Coverity

81be2f46

2015-06-09T16:01:29

ssh: move NULL check to the free function Let `ssh_stream_free()` take a NULL stream, as free functions should, and remove the check from the connection setup. The connection setup would not need the check anyhow, as we always have a stream by the time we reach this code.

fdb82dcd

2015-06-07T15:10:13

Merge pull request #3175 from git-up/build_warnings Fixed build warnings on Xcode 6.1

9f3c18e2

2015-06-02T08:36:15

Fixed build warnings on Xcode 6.1

d71e3b25

2015-06-02T10:23:54

Change error when running out of ssh agent keys

2629fc87

2015-05-24T22:33:55

cred: Check for null values when getting key from memory The public key field is optional and as such can take NULL. Account for that and do not call strlen() on NULL values. Also assert() for non-NULL values of username & private key.

f7142b5e

2015-05-24T18:38:47

cred: Declare GIT_CREDTYPE_SSH_MEMORY unconditionally Declare GIT_CREDTYPE_SSH_MEMORY to have consistent API independently of whether libgit2 was built with or without in-memory key passing support. Or rather, to have it at all since build-time definitions are not stored in headers.

08e6b875

2015-03-19T14:57:15

Return an error when ssh memory credentials are not supported. To not modify the external api.

thodg/libgit2/src/transports

src/transports

Log