|
cc1d7f5c
|
2020-08-01T17:47:20
|
|
Improve the support of atomics
This change:
* Starts using GCC's and clang's `__atomic_*` intrinsics instead of the
`__sync_*` ones, since the former supercede the latter (and can be
safely replaced by their equivalent `__atomic_*` version with the
sequentially consistent model).
* Makes `git_atomic64`'s value `volatile`. Otherwise, this will make
ThreadSanitizer complain.
* Adds ways to load the values from atomics. As it turns out,
unsynchronized read are okay only in some architectures, but if we
want to be correct (and make ThreadSanitizer happy), those loads
should also be performed with the atomic builtins.
* Fixes two ThreadSanitizer warnings, as a proof-of-concept that this
works:
- Avoid directly accessing `git_refcount`'s `owner` directly, and
instead makes all callers go through the `GIT_REFCOUNT_*()` macros,
which also use the atomic utilities.
- Makes `pool_system_page_size()` race-free.
Part of: #5592
|
|
2307a225
|
2020-10-08T09:10:36
|
|
Merge pull request #5656 from ehuss/fix-check_extensions-err
Fix error return for invalid extensions.
|
|
5b7e7131
|
2020-10-07T15:54:08
|
|
Fix error return for invalid extensions.
|
|
|
9deadaee
|
2020-10-07T00:35:29
|
|
Merge pull request #5654 from dan-tull/master
Change bare free to allocator free (fixes #5653)
|
|
cce966c3
|
2020-10-06T17:51:14
|
|
Change bare free to allocator free.
The info pointer was allocated with git__malloc, so needs to be free'd with git__free.
This bug can lurk pretty easily since if there's no custom allocator this is fine.
|
|
|
d32a4072
|
2020-10-05T14:25:51
|
|
Merge pull request #5401 from lhchavez/multi-pack-index
midx: Introduce a parser for multi-pack-index files
|
|
|
005e7715
|
2020-02-23T22:28:52
|
|
multipack: Introduce a parser for multi-pack-index files
This change is the first in a series to add support for git's
multi-pack-index. This should speed up large repositories significantly.
Part of: #5399
|
|
|
6d1f1926
|
2020-10-05T09:41:08
|
|
Merge pull request #5648 from eltociear/patch-1
Fixed typo in comment
|
|
|
9293e165
|
2020-10-04T21:41:28
|
|
Merge pull request #5494 from kevinjswinton/master
Fix binary diff showing /dev/null
|
|
e8ab3db9
|
2020-07-07T22:29:05
|
|
p_chmod: Android compatibility
Fix #5565
Pre-Android 5 did not implement a virtual filesystem atop FAT partitions for Unix permissions, which causes chmod to fail. However, Unix permissions have no effect on Android anyway as file permissions are not actually managed this way, so treating it as a no-op across all Android is safe.
|
|
|
2ab99c6d
|
2020-10-04T18:30:10
|
|
Merge pull request #5576 from lollipopman/double-auth
httpclient: only free challenges for current_server type
|
|
|
3a72345b
|
2020-10-04T18:25:32
|
|
Merge pull request #5581 from libgit2/ethomson/mainbranch
Respect `init.defaultBranch` setting
|
|
|
a94fedc1
|
2020-10-04T18:04:01
|
|
Merge pull request #5620 from dlax/parse-patch-add-delete-no-index
patch_parse: handle absence of "index" header for new/deleted cases
|
|
|
a1f0135d
|
2020-10-04T18:01:09
|
|
Merge pull request #5626 from csware/parse_bool
boolean config parsing fails in some cases with mapped values
|
|
|
36dc681e
|
2020-10-04T17:54:15
|
|
Merge pull request #5629 from csware/config-multiline-parse
Fix config file parsing with multi line values containing quoted parts
|
|
|
30ba98a1
|
2020-10-04T17:40:38
|
|
Merge pull request #5636 from libgit2/pks-release-build-warnings
Fix release build warnings
|
|
4b93f165
|
2020-10-04T12:45:26
|
|
Fixed typo in comment
occured -> occurred
|
|
6ac18625
|
2020-09-09T17:51:38
|
|
Fix config file parsing with multi line values containing quoted parts
Signed-off-by: Sven Strickroth <email@cs-ware.de>
|
|
b254a585
|
2020-09-18T10:43:34
|
|
sysdir: fix formatting error message with NULL string
When trying to the template dir, we pass in a `NULL` pointer for the
filename. That's perfectly fine, but if we're failing to find the
template directory then we'll creat an error message with the `NULL`
pointer passed in.
Fix the issue by setting different error messages based on whether the
filename is given or not. This even makes sense, as we're not searching
for a file in case we have no `name`, but for a directory. So the error
would've been misleading anyway.
|
|
|
8087498d
|
2020-09-18T10:49:24
|
|
Merge pull request #5631 from csware/issue-5611
Fix deprecation links inside of documentation not working
|
|
|
37ae0079
|
2020-09-18T10:38:45
|
|
patch_parse: silence maybe-uninitialized warning
When building libgit2 with the release build type, then GCC complains
about mode being potentially uninitialized. While this seems to be a
false positive, let's silence this warning by zero-initializing the
mode.
|
|
|
819492c1
|
2020-09-18T10:34:40
|
|
refs: fix potential free of uninitialized variable
The `signature` variable in `git_reference_rename` isn't initialized and
neither does `git_reference__log_signature` always do. So if the latter
function fails, we'll call `git_signature_free` on this unininitialized
variable.
Fix the issue by initializing the pointer with `NULL`.
|
|
|
9e81711b
|
2020-09-18T10:31:50
|
|
Merge pull request #5632 from csware/winhttp_typo
Fix typo: Make ifndef macroname the same as the define name
|
|
|
ae99e697
|
2020-09-17T11:19:49
|
|
Merge pull request #5619 from ddevault/diffstat-segfault
diff stats: fix segfaults with new files
|
|
ec26b16d
|
2020-08-29T10:44:40
|
|
diff stats: fix segfaults with new files
|
|
298b01ab
|
2020-09-15T09:26:08
|
|
Merge pull request #5633 from csware/winhttp1.3
WinHTTP: Try to use TLS1.3
|
|
|
d65edcdc
|
2020-09-15T09:23:00
|
|
Merge pull request #5628 from interkosmos/master
Fixed includes for FreeBSD
|
|
6887e9db
|
2020-09-14T15:54:00
|
|
Removed FreeBSD-related macros.
|
|
|
797535b6
|
2020-09-12T00:14:41
|
|
WinHTTP: Try to use TLS1.3
Signed-off-by: Sven Strickroth <email@cs-ware.de>
|
|
|
090e7d85
|
2020-09-10T22:41:15
|
|
Fix deprecation links inside of documentation not working
Signed-off-by: Sven Strickroth <email@cs-ware.de>
|
|
|
621e501c
|
2020-09-10T10:32:02
|
|
Fix typo: Make ifndef macroname the same as the define name
Signed-off-by: Sven Strickroth <email@cs-ware.de>
|
|
|
e937a2aa
|
2020-09-09T19:08:20
|
|
Fixed includes for FreeBSD.
|
|
|
c464f123
|
2020-09-09T15:41:12
|
|
Improve formatting
Signed-off-by: Sven Strickroth <email@cs-ware.de>
|
|
|
b97f41db
|
2020-09-09T15:38:20
|
|
Add boolean tests for "on" and "off"
Signed-off-by: Sven Strickroth <email@cs-ware.de>
|
|
|
36cf1db2
|
2020-09-09T12:26:34
|
|
Support empty values for git_config_get_mapped and git_config_lookup_map_value
Signed-off-by: Sven Strickroth <email@cs-ware.de>
|
|
|
86d04918
|
2020-09-09T11:55:25
|
|
Fix parsing boolean config values when using git_config_get_mapped and git_config_lookup_map_value
Signed-off-by: Sven Strickroth <email@cs-ware.de>
|
|
|
1e987525
|
2020-09-08T17:25:06
|
|
Merge pull request #5624 from csware/http-upgrade-header
Don't fail if a HTTP server announces he supports a protocol upgrade
|
|
|
2dea3eb4
|
2020-09-08T13:03:07
|
|
Don't fail if a HTTP server announces he supports a protocol upgrade
cf. RFC7230 section 6.7, an Upgrade header in a normal response merely informs the client that the server supports upgrading to other protocols, and the client can ask for such an upgrade in a later request. The server requiring an upgrade is via the 426 Upgrade Required response code, not the mere presence of the Upgrade response header.
(closes issue #5573)
Signed-off-by: Sven Strickroth <email@cs-ware.de>
|
|
|
f29e6dde
|
2020-09-01T09:58:13
|
|
Merge pull request #5621 from kim/null-safe-git_net_url_is_default_port
Return false instead of segfaulting when checking for default port
|
|
7e1f0b22
|
2020-08-31T21:54:17
|
|
Return false instead of segfaulting when checking for default port
`default_port_for_scheme` returns NULL if the scheme is not one of the
builtin ones. This may cause a segmentation fault if a custom transport
URL happens to contain a port number, and this code path is triggered
(e.g. by setting git_fetch_options->update_fetchhead to 1).
|
|
|
a5eb7e02
|
2020-08-31T12:52:48
|
|
Merge pull request #5612 from mmuman/haiku
deps: ntlmclient: fix htonll for Haiku
|
|
|
8e3f8823
|
2020-08-31T12:45:11
|
|
Merge pull request #5615 from libgit2/pks/azure-remove-docjob
azure: Remove job generating documentation
|
|
74293ea0
|
2020-08-29T16:46:47
|
|
patch_parse: handle absence of "index" header for new/deleted cases
This follows up on 11de594f85479e4804b07dc4f7b33cfe9212bea0 which added
support for parsing patches without extended headers (the "index
<hash>..<hash> <mode>" line); issue #5267.
We now allow transition from "file mode" state to "path" state directly
if there is no "index", which will happen for patches adding or deleting
files as demonstrated in added test case.
|
|
|
931bd3b8
|
2020-08-28T12:30:35
|
|
Merge pull request #5617 from muhkuh-sys/master
Fix crash in git_describe_commit when opts are NULL.
|
|
d10c846e
|
2020-08-27T21:47:48
|
|
Fix crash in git_describe_commit when opts are NULL.
The argument "opts" can be NULL, which selects default options. Do not access
"opts" directly but only the normalized copy.
|
|
|
7851a165
|
2020-08-24T12:31:08
|
|
azure: Remove job generating documentation
With the recent addition of GitHub Actions to our CI infrastructure, we
now have two jobs which generate documentation: once in GHA, once in
Azure. Naturally, as they both want to update the same branch, they race
against each other and one of both jobs will fail.
Fix this by removing the documentation job from Azure.
|
|
|
da3288de
|
2020-08-24T11:20:50
|
|
Merge pull request #5600 from andrewhickman/fix-double-free
Fix `git_mwindow_scan_recently_used` spuriously returning true
|
|
|
24eacab9
|
2020-08-24T11:00:20
|
|
Merge pull request #5599 from libgit2/ethomson/zlib
zstream: handle Z_BUF_ERROR appropriately in get_output_chunk
|
|
|
8a24ee8a
|
2020-08-24T10:28:02
|
|
Merge pull request #5610 from SirWindfield/patch-1
docs: fix typo
|
|
92913621
|
2020-08-21T23:00:59
|
|
deps: ntlmclient: #error out on unknown platforms
We explicitly pass win32 & macOS, although some old version might not
have it.
|
|
|
49ce5e29
|
2020-08-21T17:34:57
|
|
deps: ntlmclient: fix htonll for Haiku
Use B_HOST_TO_BENDIAN_INT64 for that.
|
|
e46ef5ee
|
2020-08-18T14:58:21
|
|
docs: fix typo
|
|
04d59466
|
2020-08-05T22:04:15
|
|
Preserve behaviour of `git_mwindow_scan_recently_used` with `*out_window` set
|
|
|
8ea9187a
|
2020-08-05T20:22:55
|
|
Fix `git_mwindow_scan_recently_used` spuriously returning true
|
|
|
4d4befac
|
2020-08-05T10:07:23
|
|
pack: check pack_window_open return
|
|
|
9bb61bad
|
2020-08-05T09:42:52
|
|
zstream: handle Z_BUF_ERROR appropriately in get_output_chunk
Our processing loop in git_zstream_get_output_chunk does not handle
`Z_BUF_ERROR` appropriately at the end of a compressed window.
From the zlib manual, inflate will return:
> Z_BUF_ERROR if no progress was possible or if there was not enough
> room in the output buffer when Z_FINISH is used. Note that Z_BUF_ERROR
> is not fatal, and inflate() can be called again with more input and
> more output space to continue decompressing.
In our loop, we were waiting until we got the expected size, then
ensuring that we were at `Z_STREAM_END`. We are not guaranteed to be,
since zlib may be in the `Z_BUF_ERROR` state where it has consumed a
full window's worth of data, but it doesn't know that it's really at the
end of the stream. There _could_ be more compressed data, but it
doesn't _know_ that there's not until we make a subsequent call.
We can change the loop to look for the end of stream instead of our
expected size. This allows us to call inflate one last time when we are
at the end of a window (and in the `Z_BUF_ERROR` state), allowing it to
recognize the end of the stream, and move from the `Z_BUF_ERROR` state
to the `Z_STREAM_END` state.
If we do this, we need another exit condition: when `bytes == 0`, then
no progress could be made and we should stop trying to inflate. This
will be an error case, caught by the size and/or end-of-stream test.
|
|
|
0ff70f4a
|
2020-07-15T22:15:27
|
|
refs: remove "master" branch constant
We don't use "master" as a hardcoded default in as many places; remove
the now unused master branch constant.
|
|
|
e3f065ea
|
2020-07-15T22:13:47
|
|
remote: update the default remote branch
When the remote does not tell us its default, we have to guess what the
default branch should be. Use our local initial branch configuration to
inform the remote branch default when we clone.
|
|
|
cd2f74d2
|
2020-07-15T21:29:56
|
|
clone: don't assume the default branch name
We derive the branch name, even in our code, we shouldn't assume that
the branch will be "master".
|
|
|
471ed794
|
2020-07-13T10:05:04
|
|
clone: respect init.defaultBranch when empty
When cloning an empty repository, we need to guess what the branch
structure should be; instead of hardcoding `master`, use the
`init.defaultBranch` setting it if it provided.
|
|
|
84d2a035
|
2020-07-13T10:10:02
|
|
repo: teach isempty about default branch config
The git_repository_isempty function now respects the init.defaultbranch
setting (instead of hardcoding "master") to understand if a repository
is empty or not.
|
|
|
4cc3b2cb
|
2020-07-13T10:08:23
|
|
repo: add git_repository_initialbranch
Provide a helper function to get the initial branch for a repository,
respecting the `init.defaultBranch` configuration option, if set, and
returning the "default default" (currently `master`) otherwise.
|
|
|
e411aae3
|
2020-07-13T08:47:15
|
|
repo: honor the init.defaultBranch setting
As part of a push towards more inclusive language, git is reconsidering
using "master" as the default branch name. As a first step, this
setting will be configurable with the `init.defaultBranch` configuration
option. Honor this during repository initialization.
During initialization, we will create an initial branch:
1. Using the `initial_head` setting, if specified;
2. Using the `HEAD` configured in a template, if it exists;
3. Using the `init.defaultBranch` configuration option, if it is set; or
4. Using `master` in the absence of additional configuration.
|
|
|
c71321a0
|
2020-08-03T11:53:03
|
|
Merge pull request #5596 from libgit2/ethomson/sanitizer_ci
sanitizer ci: skip negotiate tests
|
|
|
6973c570
|
2020-08-03T11:03:19
|
|
sanitizer ci: skip negotiate tests
We don't build with SPNEGO enabled on our focal-based sanitizer builds,
so we need to disable the negotiate tests.
|
|
|
11a62973
|
2020-08-03T10:01:26
|
|
Merge pull request #5569 from lhchavez/ci-sanitizers
Add CI support for Memory and UndefinedBehavior Sanitizers
|
|
|
c5d41d46
|
2020-08-03T09:55:22
|
|
Merge pull request #5563 from pks-t/pks/worktree-heads
Access HEAD via the refdb backends
|
|
|
52ccbc5d
|
2020-08-03T09:52:30
|
|
Merge pull request #5582 from libgit2/pks-config-map-optimization
config_entries: Avoid excessive map operations
|
|
|
f2400a9c
|
2020-07-13T20:56:08
|
|
config_entries: Avoid excessive map operations
When appending config entries, we currently always first get the
currently existing map entry and then afterwards update the map to
contain the current config value. In the common scenario where keys
aren't being overridden, this is the best we can do. But in case a key
gets set multiple times, then we'll also perform these two map
operations. In extreme cases, hashing the map keys will thus start to
dominate performance.
Let's optimize the pattern by using a separately allocated map entry.
Currently, we always put the current list entry into the map and update
it to get any overridden multivar. As these list entries are also used
to iterate config entries, we cannot update them in-place in the map and
are thus forced to always set the map to contain the new entry. But with
a separately allocated map entry, we can now create one once per config
key and insert it into the map. Whenever appending a new config value
with the same key, we can now just update the map entry in-place instead
of having to replace the map entry completely.
This reduces calls to the hashing function by half and trades the
improved runtime for one more allocation per unique config key. Given
that the refactoring arguably improves code readability by splitting
concerns of the `config_entry_list` type and not having to track it in
two different structures, this alone would already be reason enough to
take the trade.
Given a pathological case of a gitconfig with 100.000 repeated keys and
a section of length 10.000 characters, this reduces runtime by half from
approximately 14 seconds to 7 seconds as expected.
|
|
|
a83fd510
|
2020-07-12T21:26:59
|
|
Merge pull request #5396 from lhchavez/mwindow-file-limit
mwindow: set limit on number of open files
|
|
|
92d42eb3
|
2020-07-12T09:53:10
|
|
Minor nits and style formatting
|
|
|
ce4cb073
|
2020-07-12T18:19:21
|
|
tests: verify renaming branch really updates worktree HEAD
In case where a branch is getting renamed, all HEADs of the main
repository and of its worktrees that point to the old branch need to get
updated to point to the new branch. We already do so and have a test for
this, but the test only verifies that we're able to lookup the updated
HEAD, not what it contains.
Let's make the test more specific by verifying the updated HEAD also has
the correct updated symbolic target.
|
|
|
5434f9a3
|
2020-06-17T14:57:13
|
|
refs: remove function to read HEAD directly
With the last user of `git_reference__read_head` gone, let's remove it
as it's been reading references without consulting the refdb backends.
|
|
|
65895410
|
2020-06-17T14:56:36
|
|
repository: retrieve worktree HEAD via refdb
The function `git_repository_head_for_worktree` currently uses
`git_reference__read_head` to directly read a given worktree's HEAD from
the filesystem. This is broken in case the repository uses a different
refdb implementation than the filesystem-based one, so let's instead
open the worktree as a real repository and use `git_reference_lookup`.
This also fixes the case where the worktree's HEAD is not a symref, but
a detached HEAD, which would have resulted in an error previously.
|
|
|
d1f210fc
|
2020-06-17T15:09:49
|
|
repository: remove function to iterate over HEADs
The function `git_repository_foreach_head` is broken, as it directly
interacts with the on-disk representation of the reference database,
thus assuming that no other refdb is used for the given repository. As
this is an internal function only and all users have been replaced,
let's remove this function.
|
|
|
ac5fbe31
|
2020-06-17T14:43:27
|
|
branch: determine whether a branch is checked out via refdb
We currently determine whether a branch is checked out via
`git_repository_foreach_head`. As this function reads references
directly from the disk, it breaks our refdb abstraction in case the
repository uses a different reference backend implementation than the
filesystem-based one. So let's use `git_repository_foreach_worktree`
instead -- while it's less efficient, it is at least correct in all
corner cases.
|
|
|
7216b048
|
2020-06-17T14:23:15
|
|
refs: update HEAD references via refdb
When renaming a reference, we need to iterate over every HEAD and
potentially update it in case it is a symbolic reference pointing to the
previous name of the renamed reference. Most importantly, this doesn't
only include HEADs from the repo we're renaming the reference in, but we
also need to iterate over HEADs from linked worktrees.
In order to update the HEADs, we directly read them from the worktree's
gitdir and thus assume that both repository and worktrees use the
filesystem-based reference backend. But this breaks as soon as one got a
repository with a different refdb and breaks our own abstractions. So
let's instead update HEAD references via the refdb by first opening each
worktree as a repository and then using the usual functions to read and
update HEADs. This is a lot less efficient than the current code, but
it's not like we can really help this: going via the refdb is mandatory.
|
|
|
2fcb4f28
|
2020-06-17T14:09:04
|
|
repository: introduce new function to iterate over all worktrees
Given a Git repository, it's non-trivial to iterate over all worktrees
that are associated with it, including the "main" repository. This
commit adds a new internal function `git_repository_foreach_worktree`
that does this for us.
|
|
|
26b9e489
|
2020-07-12T17:04:29
|
|
Merge pull request #5570 from libgit2/pks/refdb-refactorings
refdb: a set of preliminary refactorings for the reftable backend
|
|
|
34987447
|
2020-06-30T10:13:26
|
|
refdb: avoid unlimited spinning in case of symref cycles
To determine whether another reflog entry needs to be written for HEAD
on a reference update, we need to see whether HEAD directly or
indirectly points to the reference we're updating. The resolve logic is
currently completely unbounded except an error occurs, which effectively
means that we'd be spinning forever in case we have a symref loop in the
repository refdb.
Let's fix the issue by using `git_refdb_resolve` instead, which is
always bounded.
|
|
|
b895547c
|
2020-06-30T09:35:21
|
|
refs: replace reimplementation of reference resolver
The refs code currently has a second implementation that resolves
references in order to find any final symbolic reference pointing to a
nonexistent target branch. As we've just extended `git_refdb_resolve` to
also return such references, let's use that one instead in order to
reduce code duplication.
|
|
|
cf7dd05b
|
2020-06-30T13:26:05
|
|
refdb: return resolved symbolic refs pointing to nonexistent refs
In some cases, resolving references requires us to also know about the
final symbolic reference that's pointing to a nonexistent branch, e.g.
in an empty repository where the main branch is yet unborn but HEAD
already points to it. Right now, the resolving logic is thus split up
into two, where one is the new refdb implementation and the second one
is an ad-hoc implementation inside "refs.c".
Let's extend `git_refdb_resolve` to also return such final dangling
references pointing to nonexistent branches so we can deduplicate the
resolving logic.
|
|
|
c54f40e4
|
2020-06-30T09:28:12
|
|
refs: move resolving of references into the refdb
Resolving of symbolic references is currently implemented inside the
"refs" layer. As a result, it's hard to call this function from
low-level parts that only have a refdb available, but no repository, as
the "refs" layer always operates on the repository-level. So let's move
the function into the generic "refdb" implementation to lift this
restriction.
|
|
|
ae30009e
|
2020-07-12T16:01:15
|
|
Merge pull request #5547 from pks-t/pks/cmake-modernization-pt2
CMake modernization pt2
|
|
|
9703d26f
|
2020-06-29T12:22:27
|
|
tests: reflog: remove unused signature
There's two tests that create a commit signature, but never make any use
of it. Let's remove these to avoid any confusion.
|
|
|
1f39593b
|
2020-06-30T08:53:59
|
|
refdb: extract function to check whether to append HEAD to the reflog
The logic to determine whether a reflog entry should be for the HEAD
reference is non-trivial. Currently, the only user of this is the
filesystem-based refdb, but with the advent of the reftable refdb we're
going to add a second user that's interested in having the same
behaviour.
Let's pull out a new function that checks whether a given reference
should cause a entry to be written to the HEAD reflog as a preparatory
step.
|
|
|
e02478b1
|
2020-06-05T08:17:03
|
|
refdb: extract function to check whether a reflog should be written
The logic to determine whether a reflog should be written is
non-trivial. Currently, the only user of this is the filesystem-based
refdb, but with the advent of the reftable refdb we're going to add a
second user that's interested in having the same behaviour.
Let's pull out a new function that checks whether a given reference
should cause a reflog to be written as a preparatory step.
|
|
|
9bc6e655
|
2020-06-05T11:37:30
|
|
cmake: remove CheckPrototypeDefinition module
In the past, we've imported the CheckPrototypeDefinition into our own
module directory as it wasn't yet available in all supported CMake
versions. Now that we require at least CMake v3.5, we don't need to
bundle it anymore as it's included with the distribution already.
Let's drop the included modules and always use upstream's version.
|
|
|
4218403e
|
2020-06-05T10:49:09
|
|
cmake: use target-specific compile definitions
We set up some compile definitions as part of our src/CMakeLists.txt.
While the definitions are global, we really only need them as part of
the git2internal target which compiles all the objects. Let's thus use
`target_compile_definitions` instead of `add_definitions`.
|
|
|
53911edd
|
2020-06-05T10:24:30
|
|
cmake: use git2internal target to populate sources
Modern CMake is usually target-driven in that a target is first defined
and then the likes of `target_sources`, `target_include_directories`
etc. are used to further populate the target. We still use old-style
CMake, where we first set up a set of variables and then populate the
target in a single call.
Let's migrate to modern CMake usage by starting to populate the sources
of our git2internal target piece-by-piece. While this is a small step,
it allows us to convert to target-based build instructions
piece-by-piece.
|
|
|
19eb1e4b
|
2020-06-05T10:07:33
|
|
cmake: specify project version
We currently do not set up a project version within CMake, meaning that
it can't be use by other projects including libgit2 as a sub-project and
also not by other tools like IDEs.
This commit changes this to always set up a project version, but instead
of extracting it from the "version.h" header we now set it up directly.
This is mostly to avoid mis-use of the previous `LIBGIT2_VERSION`
variables, as we should now always use the `libgit2_VERSION` ones that
are set up by CMake if one provides the "VERSION" keyword to the
`project()` call. While this is one more moving target we need to adjust
on releases, this commit also adjusts our release script to verify that
the project version was incremented as expected.
|
|
bd346313
|
2020-07-10T15:37:08
|
|
httpclient: only free challenges for current_server type
Prior to this commit we freed both the server and proxy auth challenges
in git_http_client_read_response. This works when the proxy needs auth
or when the server needs auth, but it does not work when both the proxy
and the server need auth as we erroneously remove the server auth
challenge before we have added them as server credentials. Instead only
remove the challenges for the current_server type.
Co-authored-by: Stephen Gelman <ssgelm@gmail.com>
|
|
|
6a917c04
|
2020-06-28T15:51:43
|
|
Add CI support for Memory and UndefinedBehavior Sanitizers
This change adds two new build targets: MSan and UBSan. This is because
even though OSS-Fuzz is great and adds a lot of coverage, it only does
that for the fuzz targets, so the rest of the codebase is not
necessarily run with the Sanitizers ever :( So this change makes sure
that MSan/UBSan warnings don't make it into the codebase.
As part of this change, the Ubuntu focal container is introduced. It
builds mbedTLS and libssh2 as debug libraries into /usr/local and as
MSan-enabled libraries into /usr/local/msan. This latter part is needed
because MSan requires the binary and all its dependent libraries to be
built with MSan support so that memory allocations and deallocations are
tracked correctly to avoid false positives.
|
|
|
325375e3
|
2020-07-09T23:12:58
|
|
Merge pull request #5568 from lhchavez/ubsan
Make the tests run cleanly under UndefinedBehaviorSanitizer
|
|
|
2ffa426e
|
2020-07-09T23:02:05
|
|
Merge pull request #5567 from lhchavez/msan
Make the tests pass cleanly with MemorySanitizer
|
|
|
60536163
|
2020-07-09T22:56:44
|
|
Merge pull request #5561 from A-Ovchinnikov-mx/a-ovchin/windres-rc
Enable building git2.rc resource script with GCC
|
|
|
8720ae8a
|
2020-07-02T11:45:16
|
|
Merge pull request #5571 from lhchavez/ntlmclient-sanitizers
Make NTLMClient Memory and UndefinedBehavior Sanitizer-clean
|
|
dc1deb3b
|
2020-07-01T15:41:38
|
|
Use __GNUC__ macro in the resource script
Fix the default LIBGIT2_FILENAME for GNU windres
|
|
|
71000441
|
2020-06-16T18:58:07
|
|
Review: Rename the stringize macro
|
|
|
5c40456b
|
2020-06-16T13:19:02
|
|
Enable building git2.rc resource script with GCC
|