|
d62e44cb
|
2019-06-03T18:35:08
|
|
checkout: Fix removing untracked files by path in subdirectories
The checkout code didn't iterate into a subdir if it didn't match the
pathspec, but since the pathspec might match files in the subdir we
should recurse into it (In contrast to gitignore handling).
Fixes #5089
|
|
2a1d97e6
|
2020-05-11T00:09:18
|
|
Merge pull request #5378 from libgit2/ethomson/checkout_pathspecs
Honor GIT_CHECKOUT_DISABLE_PATHSPEC_MATCH for all checkout types
|
|
8731e1f4
|
2020-02-02T19:01:15
|
|
tests::checkout: only examine test10 and test11.txt
The checkout::index::can_disable_pathspec_match test attempts to set a
path filter of `test11.txt` and `test12.txt`, but then validates that
`test10.txt` and `test11.txt` were left unmodified. Update the test's
path filter to match the expectation.
|
|
24bd12c4
|
2020-02-02T01:00:15
|
|
Create test case demonstrating checkout bug w/ pathspec match disabled
|
|
63de2128
|
2020-02-02T20:20:19
|
|
checkout: filter pathspecs for _all_ checkout types
We were previously applying the pathspec filter for the baseline
iterator during checkout, as well as the target tree. This was an
oversight; in fact, we should apply the pathspec filter to _all_
checkout targets, not just trees.
Add a helper function to set the iterator pathspecs from the given
checkout pathspecs, and call it everywhere.
|
|
02d27f61
|
2020-05-10T23:42:43
|
|
Merge pull request #5482 from pks-t/pks/coding-style
docs: add documentation for our coding style
|
|
d08f72eb
|
2020-05-10T23:38:48
|
|
Merge pull request #5500 from phkelley/enable-control-flow-guard
MSVC: Enable Control Flow Guard (CFG)
|
|
898caead
|
2020-05-10T19:03:10
|
|
Merge pull request #5431 from libgit2/ethomson/hexdump
git__hexdump: better mimic `hexdump -C`
|
|
63f9fbee
|
2020-04-25T15:37:45
|
|
MSVC: Enable Control Flow Guard (CFG)
This feature requires Visual Studio 2015 (MSVC_VERSION = 1900) or later. As the
minimum required CMake version is currently less than 3.7, GREATER_EQUAL is not
available to us and we must invert the result of the LESS operator.
|
|
66137ff6
|
2020-04-19T12:08:24
|
|
Merge pull request #5383 from ognarb/feature/blame-ignore-whitespace
Feature: Allow blame to ignore whitespace change
|
|
9830ab3d
|
2020-01-29T02:00:04
|
|
blame: add option to ignore whitespace changes
|
|
918a7d19
|
2020-04-14T12:26:36
|
|
Merge pull request #5487 from niacat/master
deps: ntlmclient: use htobe64 on NetBSD too
|
|
ffb6a576
|
2020-04-04T14:36:27
|
|
docs: add documentation for our coding style
For years, we've repeatedly had confusion about what our actual coding
style is not only for newcomers, but also across the core contributors.
This can mostly be attributed to the fact that we do not have any coding
conventions written down. This is now a thing of the past with the
introduction of a new document that gives an initial overview of our
style and most important best practices for both our C codebase as well
as for CMake.
While the proposed coding style for our C codebase should be rather
uncontroversial, the coding style for CMake might be. This can be
attributed to multiple facts. First, the CMake code base doesn't really
have any uniform coding style and is quite outdated in a lot of places.
Second, the proposed coding style actually breaks with our existing one:
we currently use all-uppercase function names and variables, but the
documented coding style says we use all-lowercase function names but
all-uppercase variables.
It's common practice in CMake to write variables in all upper-case, and
in fact all variables made available by CMake are exactly that. As
variables are case-sensitive in CMake, we cannot and shouldn't break
with this. In contrast, function calls are case insensitive, and modern
CMake always uses all-lowercase ones. I argue we should do the same to
get in line with other codebases and to reduce the likelihood of
repetitive strain injuries.
So especially for CMake, the proposed coding style says something we
don't have yet. I'm fine with that, as the document explicitly says that
it's what we want to have and not what we have right now.
|
|
465e10ce
|
2020-04-05T18:33:14
|
|
deps: ntlmclient: use htobe64 on NetBSD too
|
|
e9b0cfc0
|
2020-04-05T13:24:13
|
|
Merge pull request #5485 from libgit2/ethomson/sysdir_unused
sysdir: remove unused git_sysdir_get_str
|
|
b6f18db9
|
2020-04-05T11:16:29
|
|
sysdir: remove unused git_sysdir_get_str
|
|
e56d48be
|
2020-04-05T12:07:17
|
|
Merge pull request #5483 from xSetech/master
Fix typo causing removal of symbol 'git_worktree_prune_init_options'
|
|
ce2ab78f
|
2020-04-04T16:35:33
|
|
Fix typo causing removal of symbol 'git_worktree_prune_init_options'
Commit 0b5ba0d replaced this function with an "option_init"
equivallent, but misspelled the replacement function. As a result, this
symbol has been missing from libgit2.so ever since.
|
|
ad341eb7
|
2020-04-04T13:40:14
|
|
Merge pull request #5425 from lhchavez/fix-get-delta-base
pack: Improve error handling for get_delta_base()
|
|
5a1ec7ab
|
2020-04-04T13:37:13
|
|
Merge pull request #5480 from libgit2/ethomson/coverity
repo::open: ensure we can open the repository
|
|
7d9b1f07
|
2020-04-04T13:36:24
|
|
Merge pull request #5421 from petersalomonsen/examples-fixes-and-additions
examples: additions and fixes
|
|
966db47d
|
2020-04-04T13:21:02
|
|
Merge pull request #5477 from pks-t/pks/rename-detection-negative-caches
merge: cache negative cache results for similarity metrics
|
|
cb0cfc5a
|
2020-04-03T09:17:52
|
|
repo::open: ensure we can open the repository
Update the test cases to check the `git_repository_open` return code.
|
|
dc2beb7e
|
2020-02-24T18:30:16
|
|
examples: additions and fixes
add example for git commit
fix example for git add
add example for git push
|
|
4d4c8e0a
|
2020-04-02T07:34:55
|
|
Re-adding the "delta offset is zero" error case
|
|
dfd7fcc4
|
2020-04-02T13:26:13
|
|
Merge pull request #5388 from bk2204/repo-format-v1
Handle repository format v1
|
|
e1299171
|
2020-04-02T13:13:52
|
|
Merge pull request #5440 from pks-t/pks/cmake-streamlining
CMake: backend selection streamlining
|
|
b8eec0b2
|
2020-04-01T22:22:38
|
|
Merge pull request #5461 from pks-t/pks/refdb-fs-unused-header
refdb_fs: remove unused header file
|
|
5d37128d
|
2020-03-01T10:34:15
|
|
git__hexdump: better mimic `hexdump -C`
|
|
ba59a4a2
|
2020-04-01T12:34:16
|
|
Making get_delta_base() conform to the general error-handling pattern
This makes get_delta_base() return the error code as the return value
and the delta base as an out-parameter.
|
|
f3273725
|
2020-02-25T20:58:09
|
|
pack: Improve error handling for get_delta_base()
This change moves the responsibility of setting the error upon failures
of get_delta_base() to get_delta_base() instead of its callers. That
way, the caller chan always check if the return value is negative and
mark the whole operation as an error instead of using garbage values,
which can lead to crashes if the .pack files are malformed.
|
|
1c7fb212
|
2020-04-01T20:00:24
|
|
Merge pull request #5466 from pks-t/pks/patch-modechange-with-rename
patch: correctly handle mode changes for renames
|
|
85533f37
|
2020-04-01T19:59:31
|
|
Merge pull request #5474 from pks-t/pks/gitignore-cleanup
gitignore: clean up patterns from old times
|
|
2662da48
|
2020-04-01T18:03:39
|
|
Merge pull request #5478 from pks-t/pks/readme-ci-update
README.md: update build matrix to reflect our latest releases
|
|
541de515
|
2020-04-01T17:36:13
|
|
cmake: streamline backend detection
We're currently doing unnecessary work to auto-detect backends even if
the functionality is disabled altogether. Let's fix this by removing the
extraneous FOO_BACKEND variables, instead letting auto-detection modify
the variable itself.
|
|
7a6c4122
|
2020-04-01T16:15:38
|
|
README.md: update build matrix to reflect our latest releases
|
|
7d3c7057
|
2020-04-01T15:49:12
|
|
Merge pull request #5471 from pks-t/pks/v1.0
Release v1.0
|
|
4dfcc50f
|
2020-04-01T15:16:18
|
|
merge: cache negative cache results for similarity metrics
When computing renames, we cache the hash signatures for each of the
potentially conflicting entries so that we do not need to repeatedly
read the file and can at least halfway efficiently determine whether two
files are similar enough to be deemed a rename. In order to make the
hash signatures meaningful, we require at least four lines of data to be
present, resulting in at least four different hashes that can be
compared. Files that are deemed too small are not cached at all and
will thus be repeatedly re-hashed, which is usually not a huge issue.
The issue with above heuristic is in case a file does _not_ have at
least four lines, where a line is anything separated by a consecutive
run of "\n" or "\0" characters. For example "a\nb" is two lines, but
"a\0\0b" is also just two lines. Taken to the extreme, a file that has
megabytes of consecutive space- or NUL-only may also be deemed as too
small and thus not get cached. As a result, we will repeatedly load its
blob, calculate its hash signature just to finally throw it away as we
notice it's not of any value. When you've got a comparitively big file
that you compare against a big set of potentially renamed files, then
the cost simply expodes.
The issue can be trivially fixed by introducing negative cache entries.
Whenever we determine that a given blob does not have a meaningful
representation via a hash signature, we store this negative cache marker
and will from then on not hash it again, but also ignore it as a
potential rename target. This should help the "normal" case already
where you have a lot of small files as rename candidates, but in the
above scenario it's savings are extraordinarily high.
To verify we do not hit the issue anymore with described solution, this
commit adds a test that uses the exact same setup described above with
one 50 megabyte blob of '\0' characters and 1000 other files that get
renamed. Without the negative cache:
$ time ./libgit2_clar -smerge::trees::renames::cache_recomputation >/dev/null
real 11m48.377s
user 11m11.576s
sys 0m35.187s
And with the negative cache:
$ time ./libgit2_clar -smerge::trees::renames::cache_recomputation >/dev/null
real 0m1.972s
user 0m1.851s
sys 0m0.118s
So this represents a ~350-fold performance improvement, but it obviously
depends on how many files you have and how big the blob is. The test
number were chosen in a way that one will immediately notice as soon as
the bug resurfaces.
|
|
3f066a20
|
2020-03-30T12:31:11
|
|
gitignore: clean up patterns from old times
The gitignore file currently has a lot of patterns for files that we
shouldn't write anymore since we have migrated to CMake, as everybody is
expected to do out-of-source builds anyway. Let's remove them.
|
|
274b2a01
|
2020-03-28T10:29:13
|
|
version.h: bump version to v1.0.0
|
|
f79027bd
|
2020-03-28T10:28:36
|
|
docs: update changelog for v1.0
|
|
5f47cb48
|
2020-03-26T14:16:41
|
|
patch: correctly handle mode changes for renames
When generating a patch for a renamed file whose mode bits have changed
in addition to the rename, then we currently fail to parse the generated
patch. Furthermore, when generating a diff we output mode bits after the
similarity metric, which is different to how upstream git handles it.
Fix both issues by adding another state transition that allows
similarity indices after mode changes and by printing mode changes
before the similarity index.
|
|
ca782c91
|
2020-03-26T13:57:31
|
|
Merge pull request #5464 from pks-t/pks/refdb-backend-docs
refdb_backend: improve callback documentation
|
|
9a490318
|
2020-03-26T13:55:05
|
|
Merge pull request #5465 from libgit2/ethomson/cred_deprecation
credentials: provide backcompat for opaque structs
|
|
fad840d7
|
2020-03-26T12:03:28
|
|
credentials: provide backcompat for opaque structs
The credential structures are now opaque and defined in
`sys/credential.h`. However, we should continue to provide them for
backward compatibility, unless `GIT_DEPRECATED_HARD` is set.
|
|
bba9599a
|
2020-03-26T11:56:10
|
|
Merge pull request #5445 from lhchavez/fix-5443
Fix segfault when calling git_blame_buffer()
|
|
3bbbe95a
|
2020-03-26T09:41:09
|
|
refdb_backend: improve callback documentation
The callbacks are currently sparsely documented, making it really hard
to implement a new backend without taking a look at the existing
refdb_fs backend. Add documentation to make this task hopefully easier
to achieve.
|
|
9d5016dc
|
2020-03-26T08:31:42
|
|
Merge pull request #5463 from utkarsh2102/spell-fix
Fix spelling error
|
|
e7a1fd88
|
2020-03-26T11:42:47
|
|
Fix spelling error
Signed-off-by: Utkarsh Gupta <utkarsh@debian.org>
|
|
74e0489a
|
2020-03-24T19:42:10
|
|
refdb_fs: remove unused header file
The "refdb_fs.h" header contains a single struct `git_refcache` that is
not used anywhere. As a result, we can just delete the header altogether
as it doesn't have any purpose and may confuse readers.
|
|
62d59467
|
2020-03-08T02:13:11
|
|
Fix segfault when calling git_blame_buffer()
This change makes sure that the hunk is not null before trying to
dereference it. This avoids segfaults, especially when blaming against a
modified buffer (i.e. the index).
Fixes: #5443
|
|
dd435711
|
2020-03-23T10:41:34
|
|
Merge pull request #5456 from pks-t/pks/refdb-fs-backend-version
refdb_fs: initialize backend version
|
|
43fb0c29
|
2020-03-23T10:20:46
|
|
Merge pull request #5444 from josharian/issue5428
repository: improve commondir docs
|
|
a2d3316a
|
2020-03-13T23:01:11
|
|
refdb_fs: initialize backend version
While the `git_refdb_backend()` struct has a version, we do not
initialize it correctly when calling `git_refdb_backend_fs()`. Fix this
by adding the call to `git_refdb_init_backend()`.
|
|
9a102446
|
2020-03-21T16:49:44
|
|
Merge pull request #5455 from pks-t/pks/cmake-install-dirs
cmake: use install directories provided via GNUInstallDirs
|
|
44372ce5
|
2020-03-18T14:36:04
|
|
Merge pull request #5451 from pks-t/pks/docker-curl
azure: fix errors due to curl and removal of old VM images
|
|
153199ae
|
2020-03-17T09:42:41
|
|
ci: don't use --insecure
mbedTLS has fixed their certificate. 🎉
|
|
87fc539f
|
2020-03-13T22:08:19
|
|
cmake: use install directories provided via GNUInstallDirs
We currently hand-code logic to configure where to install our artifacts
via the `LIB_INSTALL_DIR`, `INCLUDE_INSTALL_DIR` and `BIN_INSTALL_DIR`
variables. This is reinventing the wheel, as CMake already provide a way
to do that via `CMAKE_INSTALL_<DIR>` paths, e.g. `CMAKE_INSTALL_LIB`.
This requires users of libgit2 to know about the discrepancy and will
require special hacks for any build systems that handle these variables
in an automated way. One such example is Gentoo Linux, which sets up
these paths in both the cmake and cmake-utils eclass.
So let's stop doing that: the GNUInstallDirs module handles it in a
better way for us, especially so as the actual values are dependent on
CMAKE_INSTALL_PREFIX. This commit removes our own set of variables and
instead refers users to use the standard ones.
As a second benefit, this commit also fixes our pkgconfig generation to
use the GNUInstallDirs module. We had a bug there where we ignored the
CMAKE_INSTALL_PREFIX when configuring the libdir and includedir keys, so
if libdir was set to "lib64", then libdir would be an invalid path. With
GNUInstallDirs, we can now use `CMAKE_INSTALL_FULL_LIBDIR`, which
handles the prefix for us.
|
|
b1f6481f
|
2020-03-10T22:07:35
|
|
cmake: ignore deprecation notes for Secure Transport
The Secure Transport interface we're currently using has been deprecated
with macOS 10.15. As we're currently in code freeze, we cannot migrate
to newer interfaces. As such, let's disable deprecation warnings for
our "schannel.c" stream.
|
|
8621bdda
|
2020-03-13T22:42:51
|
|
azure: docker: use insecure flag to fix curl downloads
We currently hve some problems with our curl downloads when building
Docker images. It's not quite obvious what the problem is and they seem
to occur semi-randomly. To unblock our CI, let's add the "--insecure"
flag to curl to ignore any certificate errors. This is intended as a
temporary solution only.
|
|
95f329b4
|
2020-03-10T21:07:34
|
|
azure: upgrade to newer hosted VM images
Azure is phasing out old images on March 23rd 2020, but we're currently
still using them. So let's upgrade images as following:
- Ubuntu 16.04 -> ubuntu-18.04
- macOS 10.13 -> macOS-10.15
- Hosted Windows machines -> vs2017-win2016
Each of them is currently the latest version. As the new Microsoft
Windows machine has upgraded to MSVS2017, we need to also adjust our
CMake generators to "Visual Studio 15 2017". As this CMake generator
doesn't accept the target platform name anymore, we instead need to set
it up via either "-A Win32" or "-A x64".
[1]: https://devblogs.microsoft.com/devops/removing-older-images-in-azure-pipelines-hosted-pools/
|
|
5ac33ced
|
2020-03-10T21:39:39
|
|
azure: docurium: fix build failure due to bumped CMake requirements
Our Docurium builds currently depend on Debian Jessie, which has CMake
v3.0 available. As rugged has bumped its CMake requirements to need at
least v3.5 now, the documentation build is thus failing.
Fix this by converting our Docurium Docker image to be based on Ubuntu
Bionic. We already do base all of our images on Ubuntu, so I don't see
any sense in using Debian here. If this was only to speed up builds, we
should just go all the way and use some minimal container like Alpine
anyway.
Also remove cache busters. As we're rebuilding the image every time,
it's we really don't need them at all.
|
|
c76c1e87
|
2020-03-10T20:39:09
|
|
azure: docker: consistently silence curl but show errors
We currently pass the "--silent" flag to most invocations of curl, but
in fact this does not only suppress the progress meter, but also any
errors. So let's also pass "--show-error", too.
|
|
f2e43a87
|
2020-03-10T22:21:20
|
|
ntlmclient: silence deprecation warnings for CommonCrypto backend
The `CC_MD4()` function has been deprecated in macOS 10.15. Silence this
warning for now until we implement a proper fix.
|
|
be36db28
|
2020-03-10T21:00:37
|
|
Merge pull request #5435 from libgit2/ethomson/canonical
win32: don't canonicalize relative paths
|
|
163db8f2
|
2020-02-28T18:53:22
|
|
win32: test relative symlinks
Ensure that we don't canonicalize symlink targets.
|
|
43d7a42b
|
2020-03-08T18:14:09
|
|
win32: don't canonicalize symlink targets
Don't canonicalize symlink targets; our win32 path canonicalization
routines expect an absolute path. In particular, using the path
canonicalization routines for symlink targets (introduced in commit
7d55bee6d, "win32: fix relative symlinks pointing into dirs",
2020-01-10).
Now, use the utf8 -> utf16 relative path handling functions, so that
paths like "../foo" will be translated to "..\foo".
|
|
f2b114ba
|
2020-03-08T18:11:45
|
|
win32: introduce relative path handling function
Add a function that takes a (possibly) relative UTF-8 path and emits a
UTF-16 path with forward slashes translated to backslashes. If the
given path is, in fact, absolute, it will be translated to absolute path
handling rules.
|
|
fb7da154
|
2020-03-08T16:34:23
|
|
win32: clarify usage of path canonicalization funcs
The path canonicalization functions on win32 are intended to
canonicalize absolute paths; those with prefixes. In other words,
things start with drive letters (`C:\`), share names (`\\server\share`),
or other prefixes (`\\?\`).
This function removes leading `..` that occur after the prefix but
before the directory/file portion (eg, turning `C:\..\..\..\foo` into
`C:\foo`). This translation is not appropriate for local paths.
|
|
a5886e9e
|
2020-03-07T16:04:04
|
|
repository: improve commondir docs
Fixes #5428
|
|
e23b8b44
|
2020-03-06T17:13:48
|
|
Merge pull request #5422 from pks-t/pks/cmake-booleans
CMake booleans
|
|
8eb1fc36
|
2020-03-06T17:12:18
|
|
Merge pull request #5439 from ignatenkobrain/patch-2
Set proper pkg-config dependency for pcre2
|
|
76e45960
|
2020-03-05T04:47:44
|
|
Merge pull request #5432 from libgit2/ethomson/sslread
httpclient: use a 16kb read buffer for macOS
|
|
502e5d51
|
2020-03-01T12:44:39
|
|
httpclient: use a 16kb read buffer for macOS
Use a 16kb read buffer for compatibility with macOS SecureTransport.
SecureTransport `SSLRead` has the following behavior:
1. It will return _at most_ one TLS packet's worth of data, and
2. It will try to give you as much data as you asked for
This means that if you call `SSLRead` with a buffer size that is smaller
than what _it_ reads (in other words, the maximum size of a TLS packet),
then it will buffer that data for subsequent calls. However, it will
also attempt to give you as much data as you requested in your SSLRead
call. This means that it will guarantee a network read in the event
that it has buffered data.
Consider our 8kb buffer and a server sending us 12kb of data on an HTTP
Keep-Alive session. Our first `SSLRead` will read the TLS packet off
the network. It will return us the 8kb that we requested and buffer the
remaining 4kb. Our second `SSLRead` call will see the 4kb that's
buffered and decide that it could give us an additional 4kb. So it will
do a network read.
But there's nothing left to read; that was the end of the data. The
HTTP server is waiting for us to provide a new request. The server will
eventually time out, our `read` system call will return, `SSLRead` can
return back to us and we can make progress.
While technically correct, this is wildly ineffecient. (Thanks, Tim
Apple!)
Moving us to use an internal buffer that is the maximum size of a TLS
packet (16kb) ensures that `SSLRead` will never buffer and it will
always return everything that it read (albeit decrypted).
|
|
dd704944
|
2020-03-03T11:05:04
|
|
Set proper pkg-config dependency for pcre2
Signed-off-by: Igor Raits <i.gnatenko.brain@gmail.com>
|
|
cd6ed4e4
|
2020-03-02T11:26:22
|
|
Merge pull request #5437 from libgit2/ethomson/azp
ci: provide globalsign certs for bionic
|
|
dc55d0e8
|
2020-03-02T10:22:54
|
|
ci: provide globalsign certs for bionic
tls.mbed.org has neglected to send their full certificate chain. Add
their intermediate cert manually. 🙄
|
|
6d25dbdc
|
2020-03-01T15:57:24
|
|
Merge pull request #5426 from pks-t/pks/freebsd-htobe64
deps: ntlmclient: fix htonll on big endian FreeBSD
|
|
8c1aef10
|
2020-03-01T15:56:22
|
|
Merge pull request #5433 from libgit2/ethomson/azp
azure-pipelines: download GlobalSign's certificate manually
|
|
0f316d59
|
2020-03-01T14:42:03
|
|
ci: provide globalsign certs
tls.mbed.org has neglected to send their full certificate chain. Add
their intermediate cert manually. 🙄
|
|
c690136c
|
2020-02-26T19:34:49
|
|
deps: ntlmclient: fix htonll on big endian FreeBSD
In commit 3828ea67b (deps: ntlmclient: fix missing htonll symbols on
FreeBSD and SunOS, 2020-02-21), we've fixed compilation on BSDs due to
missing `htonll` wrappers. While we are now using `htobe64` for both
Linux and OpenBSD, we decided to use `bswap64` on FreeBSD. While correct
on little endian systems, where we will swap from little- to big-endian,
we will also do the swap on big endian systems. As a result, we do not
use network byte order on such systems.
Fix the issue by using htobe64, as well.
|
|
a48da8fa
|
2020-02-25T22:49:16
|
|
Merge pull request #5417 from pks-t/pks/ntlmclient-htonll
deps: ntlmclient: fix missing htonll symbols on FreeBSD and SunOS
|
|
ebade233
|
2020-02-24T21:49:43
|
|
transports: auth_ntlm: fix use of strdup/strndup
In the NTLM authentication code, we accidentally use strdup(3P) and
strndup(3P) instead of our own wrappers git__strdup and git__strndup,
respectively.
Fix the issue by using our own functions.
|
|
3828ea67
|
2020-02-21T11:26:19
|
|
deps: ntlmclient: fix missing htonll symbols on FreeBSD and SunOS
The ntlmclient dependency defines htonll on Linux-based systems, only.
As a result, non-Linux systems will run into compiler and/or linker
errors due to undefined symbols.
Fix this issue for FreeBSD, OpenBSD and SunOS/OpenSolaris by including
the proper headers and defining the symbol accordingly.
|
|
45ed17bd
|
2020-02-24T21:39:23
|
|
Merge pull request #5420 from petersalomonsen/wasm-git-links
README: add language binding link to wasm-git
|
|
d8e71cb2
|
2020-02-24T21:07:34
|
|
cmake: fix ENABLE_TRACE parameter being too strict
In order to check whether tracing support should be turned on, we check
whether ENABLE_TRACE equals "ON". This is being much too strict, as
CMake will also treat "on", "true", "yes" and others as true-ish, but
passing them will disable tracing support now.
Fix the issue by simply removing the STREQUAL, which will cause CMake to
do the right thing automatically.
|
|
41b6d30c
|
2020-02-24T21:03:11
|
|
cmake: sanitize boolean options passed by user
Starting with our conversions to mix backend-autodetection and selection
into a single variable (USE_GSSAPI, USE_HTTPS, USE_SHA1), we have
introduced a simple STREQUAL to check for "ON", which indicates that the
user wants us to auto-detect available backends and pick any one that's
available. This behaviour deviates from previous behaviour, as passing a
value like "yes", "on" or "true" will in fact be treated like a backend
name and result in autodetection failure.
Fix the issue by introducing a new function `SanitizeBool`. Given a
variable that may hold a boolean value, the function will sanitize that
variable to hold either "ON" or "OFF". In case it is not a recognized
boolean, we will just keep the value as-is. This fixes the above
described issue.
|
|
d91c6eda
|
2020-02-23T18:26:47
|
|
README: add language binding link to wasm-git
|
|
705f4e85
|
2020-02-21T11:34:41
|
|
Merge pull request #5412 from kloczek/master
Fix #5410: fix installing libgit2.pc in wrong location
|
|
de1865fc
|
2020-02-21T11:10:05
|
|
Merge pull request #5413 from csware/nsectypo
Fix typo on GIT_USE_NEC
|
|
ff46c5d3
|
2020-02-20T20:47:22
|
|
Fix typo on GIT_USE_NEC
Signed-off-by: Sven Strickroth <email@cs-ware.de>
|
|
81370261
|
2020-02-19T15:57:39
|
|
Merge pull request #5374 from pks-t/pks/diff-with-empty-subtree
tests: diff: verify that we are able to diff with empty subtrees
|
|
ff3297df
|
2020-02-19T14:31:55
|
|
Merge pull request #5408 from pks-t/pks/ci-cleanups
README: update our build matrix to reflect current releases
|
|
dabd0130
|
2020-02-19T14:31:42
|
|
Merge pull request #5409 from libgit2/pks/coverity-fix-sudo
azure: docker: set up HOME variable to fix Coverity builds
|
|
fbda0575
|
2020-02-19T12:54:19
|
|
Fix #5410: fix installing libgit2.pc in wrong location
Remove using custom PKG_BUILD_PREFIu, PKG_BUILD_LIBDIR and
PKG_BUILD_INCLUDEDIR variables.
Use cmake CMAKE_INSTALL_PREFIX, LIB_INSTALL_DIR, INCLUDE_INSTALL_DIR instead.
This patch fixes install libgit2.pc file in correct location and simpifies
cmake module.
|
|
4f1923e8
|
2020-02-19T12:14:32
|
|
Merge pull request #5390 from pks-t/pks/sha1-lookup
sha1_lookup: inline its only function into "pack.c"
|
|
8aa04a37
|
2020-02-19T12:14:16
|
|
Merge pull request #5391 from pks-t/pks/coverity-fixes
Coverity fixes
|
|
6efe3d35
|
2020-02-19T11:34:55
|
|
azure: docker: set up HOME variable to fix Coverity builds
In commit 01a834066 (azure: docker: fix ARM builds by replacing gosu(1),
2020-02-18), we've switched our entrypoint from gosu(1) to use sudo(1)
instead to fix our ARM builds. The switch introduced an incompatibility
that now causes our Coverity builds to fail, as the "--preserve-env"
switch will also keep HOME at its current value. As a result, Coverity
now tries to set up its configuration directory in root's home
directory, which it naturally can't write to.
Fix the issue by adding the "--set-home" flag to sudo(1).
|
|
add54e6c
|
2020-02-19T11:31:01
|
|
README: update our build matrix to reflect current releases
As noted in docs/release.md, we only provide security updates for the
latest two releases. Let's thus drop the build status of both v0.27 and
v0.26 branches, adding the new v0.99 branch instead.
|
|
17223902
|
2020-02-19T11:27:00
|
|
Merge pull request #5291 from libgit2/ethomson/0_99
Release 0.99
|