|
37ebe9ad
|
2019-07-24T18:49:08
|
|
config_backend: rename internal structures
The internal backend structures are kind-of legacy and do not really
speak for themselves. Rename them accordingly to make them easier to
understand.
|
|
2bff84ba
|
2019-07-26T21:02:56
|
|
config_file: separate out read-only backend
To further distinguish the file writeable and readonly backends,
separate the readonly backend into its own "config_snapshot.c"
implementation. The snapshot backend can be generically used to snapshot
any type of backend.
|
|
f0b10066
|
2019-07-24T18:37:14
|
|
config_file: fix cast of readonly backend
In `backend_readonly_free`, the passed in config backend is being cast
to a `diskfile_backend` instead of to a `diskfile_readonly_backend`.
While this works out just fine because we only access its header values,
which were shared between both backends, it is undefined behaviour.
Use the correct type to fix this.
|
|
a3159df8
|
2019-07-24T18:31:43
|
|
config_file: remove shared `diskfile_header` struct
The `diskfile_header` structure is shared between both
`diskfile_backend` and `diskfile_readonly_backend`. The separation and
resulting casting is confusing at times and a source for programming
errors.
Remove the shared structure and inline them directly.
|
|
271e5fba
|
2019-07-24T18:18:18
|
|
config_file: duplicate accessors for readonly backend
While most functions of the readonly configuration backend are
implemented separately from the writeable configuration backend, the two
functions `config_iterator_new` and `config_get` are shared between
both. This sharing makes it necessary to have some shared data
structures, which is the `diskfile_header` structure. Unfortunately, this
makes the backends harder to grasp than necessary due to all the casting
between structs and also quite error prone.
Reimplement those functions for the readonly backends. As readonly
backends cannot be refreshed anyway, we can remove the calls to
`config_refresh` in there.
|
|
4e7ce1fb
|
2019-07-24T18:13:52
|
|
config_file: reimplement `config_readonly_open` generically
The `config_readonly_open` function currently receives as input a
diskfile backend and will copy its entries to a new snapshot. This is
rather intimate, as we need to assume that the source config backend is
in fact a diskfile entry. We can do better than this though by using
generic methods to copy contents of the provided backend, e.g. by using
a config iterator. This also allows us to decouple the read-only backend
from the read-write backend.
|
|
2766b92d
|
2019-07-21T15:10:34
|
|
config_file: refresh when creating an iterator
When creating a new iterator for a config file backend, then we should
always make sure that we're up to date by calling `config_refresh`.
Otherwise, we might not notice when another process has modified the
configuration file and thus will represent outdated values.
Add two tests to config::stress that verify that we get up-to-date
values when reading configuration entries via `git_config_iterator`.
|
|
9fac8b78
|
2019-07-21T15:08:22
|
|
config_file: do not refresh read-only backends
If calling `config_refresh` on a read-only configuration file backend,
then we will segfault when comparing the timestamp of the file due to
`path` being uninitialized. As a read-only snapshot should not be
refreshed anyway and stay consistent, we can simply return early when
calling `config_refresh` on a read-only snapshot.
|
|
28d11b59
|
2019-07-21T14:41:21
|
|
config_file: consistently use `GIT_CONTAINER_OF`
|
|
dbeadf8a
|
2019-07-11T10:56:05
|
|
config_parse: provide parser init and dispose functions
Right now, all configuration file backends are expected to
directly mess with the configuration parser's internals in order
to set it up. Let's avoid doing that by implementing both a
`git_config_parser_init` and `git_config_parser_dispose` function
to clearly define the interface between configuration backends
and the parser.
Ideally, we would make the `git_config_parser` structure
definition private to its implementation. But as that would
require an additional memory allocation that was not required
before we just live with it being visible to others.
|
|
32157526
|
2019-07-11T11:10:02
|
|
config_file: refactor error handling in `config_write`
Error handling in `config_write` is rather convoluted and does
not match our current code style. Refactor it to make it easier
to understand.
|
|
820fa1a3
|
2019-07-11T11:04:33
|
|
config_file: internalize `git_config_file` struct
With the previous commits, we have finally separated the config
parsing logic from the specific configuration file backend. Due
to that, we can now move the `git_config_file` structure into the
config file backend's implementation so that no other code may
accidentally start using it again. Furthermore, we rename the
structure to `diskfile` to make it obvious that it is internal,
only, and to unify it with naming scheme of the other diskfile
structures.
|
|
6e6da75f
|
2019-07-11T11:00:05
|
|
config_parse: remove use of `git_config_file`
The config parser code needs to keep track of the current parsed
file's name so that we are able to provide proper error messages
to the user. Right now, we do that by storing a `git_config_file`
in the parser structure, but as that is a specific backend and
the parser aims to be generic, it is a layering violation.
Switch over to use a simple string to fix that.
|
|
54d350e0
|
2019-06-21T12:53:43
|
|
config_file: embed file in diskfile parse data
The config file code needs to keep track of the actual
`git_config_file` structure, as it not only contains the path
of the current configuration file, but it also keeps tracks of
all includes of that file. Right now, we keep track of that
structure via the `git_config_parser`, but as that's supposed to
be a backend generic implementation of configuration parsing it's
a layering violation to have it in there.
Switch over the config file backend to use its own config file
structure that's embedded in the backend parse data. This allows
us to switch over the generic config parser to avoid using the
`git_config_file` structure.
|
|
2ba7020f
|
2019-06-27T09:23:59
|
|
config_file: avoid re-reading files on write
When we rewrite the configuration file due to any of its values
being modified, we call `config_refresh` to update the in-memory
representation of our config file backend. This is needlessly
wasteful though, as `config_refresh` will always open the on-disk
representation to reads the file contents while we already know
the complete file contents at this point in time as we have just
written it to disk.
Implement a new function `config_refresh_from_buffer` that will
refresh the backend's config entries from a buffer instead of
from the config file itself. Note that this will thus _not_
update the backend's timestamp, which will cause us to re-read
the buffer when performing a read operation on it. But this is
still an improvement as we now lazily re-read the contents, and
most importantly we will avoid constantly re-reading the contents
if we perform multiple write operations.
The following strace demonstrates this if we're re-writing a key
multiple times. It uses our config example with `config_set`
changed to update the file 10 times with different keys:
$ strace lg2 config x.x z |& grep '^open.*config'
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 3
open("/home/pks/.config/git/config", O_RDONLY|O_CLOEXEC) = 3
open("/tmp/repo/.git/config.lock", O_WRONLY|O_CREAT|O_EXCL|O_CLOEXEC, 0666) = 3
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 4
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 3
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 3
open("/tmp/repo/.git/config.lock", O_WRONLY|O_CREAT|O_EXCL|O_CLOEXEC, 0666) = 3
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 4
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 3
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 3
open("/tmp/repo/.git/config.lock", O_WRONLY|O_CREAT|O_EXCL|O_CLOEXEC, 0666) = 3
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 4
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 3
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 3
open("/tmp/repo/.git/config.lock", O_WRONLY|O_CREAT|O_EXCL|O_CLOEXEC, 0666) = 3
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 4
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 3
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 3
open("/tmp/repo/.git/config.lock", O_WRONLY|O_CREAT|O_EXCL|O_CLOEXEC, 0666) = 3
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 4
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 3
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 3
open("/tmp/repo/.git/config.lock", O_WRONLY|O_CREAT|O_EXCL|O_CLOEXEC, 0666) = 3
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 4
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 3
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 3
open("/tmp/repo/.git/config.lock", O_WRONLY|O_CREAT|O_EXCL|O_CLOEXEC, 0666) = 3
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 4
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 3
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 3
open("/tmp/repo/.git/config.lock", O_WRONLY|O_CREAT|O_EXCL|O_CLOEXEC, 0666) = 3
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 4
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 3
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 3
open("/tmp/repo/.git/config.lock", O_WRONLY|O_CREAT|O_EXCL|O_CLOEXEC, 0666) = 3
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 4
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 3
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 3
open("/tmp/repo/.git/config.lock", O_WRONLY|O_CREAT|O_EXCL|O_CLOEXEC, 0666) = 3
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 4
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 3
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 3
And now with the optimization of `config_refresh_from_buffer`:
$ strace lg2 config x.x z |& grep '^open.*config'
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 3
open("/home/pks/.config/git/config", O_RDONLY|O_CLOEXEC) = 3
open("/tmp/repo/.git/config.lock", O_WRONLY|O_CREAT|O_EXCL|O_CLOEXEC, 0666) = 3
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 4
open("/tmp/repo/.git/config.lock", O_WRONLY|O_CREAT|O_EXCL|O_CLOEXEC, 0666) = 3
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 4
open("/tmp/repo/.git/config.lock", O_WRONLY|O_CREAT|O_EXCL|O_CLOEXEC, 0666) = 3
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 4
open("/tmp/repo/.git/config.lock", O_WRONLY|O_CREAT|O_EXCL|O_CLOEXEC, 0666) = 3
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 4
open("/tmp/repo/.git/config.lock", O_WRONLY|O_CREAT|O_EXCL|O_CLOEXEC, 0666) = 3
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 4
open("/tmp/repo/.git/config.lock", O_WRONLY|O_CREAT|O_EXCL|O_CLOEXEC, 0666) = 3
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 4
open("/tmp/repo/.git/config.lock", O_WRONLY|O_CREAT|O_EXCL|O_CLOEXEC, 0666) = 3
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 4
open("/tmp/repo/.git/config.lock", O_WRONLY|O_CREAT|O_EXCL|O_CLOEXEC, 0666) = 3
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 4
open("/tmp/repo/.git/config.lock", O_WRONLY|O_CREAT|O_EXCL|O_CLOEXEC, 0666) = 3
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 4
open("/tmp/repo/.git/config.lock", O_WRONLY|O_CREAT|O_EXCL|O_CLOEXEC, 0666) = 3
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 4
As can be seen, this is quite a lot of `open` calls less.
|
|
985f5cdf
|
2019-06-27T08:41:16
|
|
config_file: split out function that reads entries from a buffer
The `config_read` function currently performs both reading the
on-disk config file as well as parsing the retrieved buffer
contents. To optimize how we refresh our config entries from an
in-memory buffer, we need to be able to directly parse buffers,
though, without involving any on-disk files at all.
Extract a new function `config_read_buffer` that sets up the
parsing logic and then parses config entries from a buffer, only.
Have `config_read` use it to avoid duplicated logic.
|
|
a0dc3027
|
2019-06-27T08:54:51
|
|
config_file: split out function that sets config entries
Updating a config file backend's config entries is a bit more
involved, as it requires clearing of the old config entries as
well as handling locking correctly. As we will need this
functionality in a future patch to refresh config entries from a
buffer, let's extract this into its own function
`config_set_entries`.
|
|
3e1c137a
|
2019-06-27T08:24:21
|
|
config_file: move refresh into `write` function
We are quite lazy in how we refresh our config file backend when
updating any of its keys: instead of just updating our in-memory
representation of the keys, we just discard the old set of keys
and then re-read the config file contents from disk. This refresh
currently happens separately at every callsite of `config_write`,
but it is clear that we _always_ want to refresh if we have
written the config file to disk. If we didn't, then we'd run
around with an outdated config file backend that does not
represent what we have on disk.
By moving the refresh into `config_write`, we are also able to
optimize the case where the config file is currently locked.
Before, we would've tried to re-read the file even if we have
only updated its cached contents without touching the on-disk
file. Thus we'd have unnecessarily stat'd the file, even though
we know that it shouldn't have been modified in the meantime due
to its lock.
|
|
d7f58eab
|
2019-06-21T11:55:21
|
|
config_file: implement stat cache to avoid repeated rehashing
To decide whether a config file has changed, we always hash its
complete contents. This is unnecessarily expensive, as
well-behaved filesystems will always update stat information for
files which have changed. So before computing the hash, we should
first check whether the stat info has actually changed for either
the configuration file or any of its includes. This avoids having
to re-read the configuration file and its includes every time
when we check whether it's been modified.
Tracing the for-each-ref example previous to this commit, one can
see that we repeatedly re-open both the repo configuration as
well as the global configuration:
$ strace lg2 for-each-ref |& grep config
access("/home/pks/.gitconfig", F_OK) = -1 ENOENT (No such file or directory)
access("/home/pks/.config/git/config", F_OK) = 0
access("/etc/gitconfig", F_OK) = -1 ENOENT (No such file or directory)
stat("/tmp/repo/.git/config", {st_mode=S_IFREG|0644, st_size=92, ...}) = 0
access("/tmp/repo/.git/config", F_OK) = 0
stat("/tmp/repo/.git/config", {st_mode=S_IFREG|0644, st_size=92, ...}) = 0
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 3
stat("/home/pks/.gitconfig", 0x7ffd15c05290) = -1 ENOENT (No such file or directory)
access("/home/pks/.gitconfig", F_OK) = -1 ENOENT (No such file or directory)
stat("/home/pks/.config/git/config", {st_mode=S_IFREG|0644, st_size=1154, ...}) = 0
access("/home/pks/.config/git/config", F_OK) = 0
stat("/home/pks/.config/git/config", {st_mode=S_IFREG|0644, st_size=1154, ...}) = 0
open("/home/pks/.config/git/config", O_RDONLY|O_CLOEXEC) = 3
stat("/tmp/repo/.git/config", {st_mode=S_IFREG|0644, st_size=92, ...}) = 0
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 3
stat("/home/pks/.gitconfig", 0x7ffd15c051f0) = -1 ENOENT (No such file or directory)
stat("/home/pks/.config/git/config", {st_mode=S_IFREG|0644, st_size=1154, ...}) = 0
open("/home/pks/.config/git/config", O_RDONLY|O_CLOEXEC) = 3
stat("/tmp/repo/.git/config", {st_mode=S_IFREG|0644, st_size=92, ...}) = 0
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 3
stat("/home/pks/.gitconfig", 0x7ffd15c05090) = -1 ENOENT (No such file or directory)
stat("/home/pks/.config/git/config", {st_mode=S_IFREG|0644, st_size=1154, ...}) = 0
open("/home/pks/.config/git/config", O_RDONLY|O_CLOEXEC) = 3
stat("/tmp/repo/.git/config", {st_mode=S_IFREG|0644, st_size=92, ...}) = 0
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 3
stat("/home/pks/.gitconfig", 0x7ffd15c05090) = -1 ENOENT (No such file or directory)
stat("/home/pks/.config/git/config", {st_mode=S_IFREG|0644, st_size=1154, ...}) = 0
open("/home/pks/.config/git/config", O_RDONLY|O_CLOEXEC) = 3
stat("/tmp/repo/.git/config", {st_mode=S_IFREG|0644, st_size=92, ...}) = 0
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 3
stat("/home/pks/.gitconfig", 0x7ffd15c05090) = -1 ENOENT (No such file or directory)
stat("/home/pks/.config/git/config", {st_mode=S_IFREG|0644, st_size=1154, ...}) = 0
open("/home/pks/.config/git/config", O_RDONLY|O_CLOEXEC) = 3
With the change, we only do stats for those files and open them a
single time, only:
$ strace lg2 for-each-ref |& grep config
access("/home/pks/.gitconfig", F_OK) = -1 ENOENT (No such file or directory)
access("/home/pks/.config/git/config", F_OK) = 0
access("/etc/gitconfig", F_OK) = -1 ENOENT (No such file or directory)
stat("/tmp/repo/.git/config", {st_mode=S_IFREG|0644, st_size=92, ...}) = 0
access("/tmp/repo/.git/config", F_OK) = 0
stat("/tmp/repo/.git/config", {st_mode=S_IFREG|0644, st_size=92, ...}) = 0
stat("/tmp/repo/.git/config", {st_mode=S_IFREG|0644, st_size=92, ...}) = 0
open("/tmp/repo/.git/config", O_RDONLY|O_CLOEXEC) = 3
stat("/home/pks/.gitconfig", 0x7ffe70540d20) = -1 ENOENT (No such file or directory)
access("/home/pks/.gitconfig", F_OK) = -1 ENOENT (No such file or directory)
stat("/home/pks/.config/git/config", {st_mode=S_IFREG|0644, st_size=1154, ...}) = 0
access("/home/pks/.config/git/config", F_OK) = 0
stat("/home/pks/.config/git/config", {st_mode=S_IFREG|0644, st_size=1154, ...}) = 0
stat("/home/pks/.config/git/config", {st_mode=S_IFREG|0644, st_size=1154, ...}) = 0
open("/home/pks/.config/git/config", O_RDONLY|O_CLOEXEC) = 3
stat("/tmp/repo/.git/config", {st_mode=S_IFREG|0644, st_size=92, ...}) = 0
stat("/home/pks/.gitconfig", 0x7ffe70540ca0) = -1 ENOENT (No such file or directory)
stat("/home/pks/.gitconfig", 0x7ffe70540c80) = -1 ENOENT (No such file or directory)
stat("/home/pks/.config/git/config", {st_mode=S_IFREG|0644, st_size=1154, ...}) = 0
stat("/tmp/repo/.git/config", {st_mode=S_IFREG|0644, st_size=92, ...}) = 0
stat("/home/pks/.gitconfig", 0x7ffe70540b40) = -1 ENOENT (No such file or directory)
stat("/home/pks/.gitconfig", 0x7ffe70540b20) = -1 ENOENT (No such file or directory)
stat("/home/pks/.config/git/config", {st_mode=S_IFREG|0644, st_size=1154, ...}) = 0
stat("/tmp/repo/.git/config", {st_mode=S_IFREG|0644, st_size=92, ...}) = 0
stat("/home/pks/.gitconfig", 0x7ffe70540b40) = -1 ENOENT (No such file or directory)
stat("/home/pks/.gitconfig", 0x7ffe70540b20) = -1 ENOENT (No such file or directory)
stat("/home/pks/.config/git/config", {st_mode=S_IFREG|0644, st_size=1154, ...}) = 0
stat("/tmp/repo/.git/config", {st_mode=S_IFREG|0644, st_size=92, ...}) = 0
stat("/home/pks/.gitconfig", 0x7ffe70540b40) = -1 ENOENT (No such file or directory)
stat("/home/pks/.gitconfig", 0x7ffe70540b20) = -1 ENOENT (No such file or directory)
stat("/home/pks/.config/git/config", {st_mode=S_IFREG|0644, st_size=1154, ...}) = 0
The following benchmark has been performed with and without the
stat cache in a best-of-ten run:
```
int lg2_repro(git_repository *repo, int argc, char **argv)
{
git_config *cfg;
int32_t dummy;
int i;
UNUSED(argc);
UNUSED(argv);
check_lg2(git_repository_config(&cfg, repo),
"Could not obtain config", NULL);
for (i = 1; i < 100000; ++i)
git_config_get_int32(&dummy, cfg, "foo.bar");
git_config_free(cfg);
return 0;
}
```
Without stat cache:
$ time lg2 repro
real 0m1.528s
user 0m0.568s
sys 0m0.944s
With stat cache:
$ time lg2 repro
real 0m0.526s
user 0m0.268s
sys 0m0.258s
This benchmark shows a nearly three-fold performance improvement.
This change requires that we check our configuration stress tests
as we're now in fact becoming more racy. If somebody is writing a
configuration file at nearly the same time (there is a window of
100ns on Windows-based systems), then it might be that we realize
that this file has actually changed and thus may not re-read it.
This will only happen if either an external process is rewriting
the configuration file or if the same process has multiple
`git_config` structures pointing to the same time, where one of
both is being used to write and the other one is used to read
values.
|
|
d0868646
|
2019-06-21T11:43:09
|
|
config: use `git_config_file` in favor of `struct config_file`
|
|
5811e3ba
|
2019-06-13T19:16:32
|
|
config_file: use `wildmatch` to evaluate conditionals
We currently use `p_fnmatch` to compute whether a given "gitdir:"
or "gitdir/i:" conditional matches the current configuration file
path. As git.git has moved to use `wildmatch` instead of
`p_fnmatch` throughout its complete codebase, we evaluate
conditionals inconsistently with git.git in some special cases.
Convert `p_fnmatch` to use `wildmatch`. The `FNM_LEADINGDIR` flag
cannot be translated to `wildmatch`, but in fact git.git doesn't
use it here either. And in fact, dropping it while we go
increases compatibility with git.git.
|
|
cf1a114b
|
2019-06-13T19:10:22
|
|
config_file: do not include trailing '/' for "gitdir" conditionals
When evaluating "gitdir:" and "gitdir/i:" conditionals, we
currently compare the given pattern with the value of
`git_repository_path`. Thing is though that `git_repository_path`
returns the gitdir path with trailing '/', while we actually need
to match against the gitdir without it.
Fix this issue by stripping the trailing '/' previous to
matching. Add various tests to ensure we get this right.
|
|
5d987f7d
|
2019-06-13T19:00:06
|
|
config_file: refactor `do_match_gitdir` to improve readability
The function `do_match_gitdir` has some horribly named parameters
and variables. Rename them to improve readability. Furthermore,
fix a potentially undetected out-of-memory condition when
appending "**" to the pattern.
|
|
451df793
|
2019-06-13T15:20:23
|
|
posix: remove implicit include of "fnmatch.h"
We're about to phase out our bundled fnmatch implementation as
git.git has moved to wildmatch long ago in 2014. To make it
easier to spot which files are stilll using fnmatch, remove the
implicit "fnmatch.h" include in "posix.h" and instead include it
explicitly.
|
|
02683b20
|
2019-01-12T23:06:39
|
|
regexec: prefix all regexec function calls with p_
Prefix all the calls to the the regexec family of functions with `p_`.
This allows us to swap out all the regular expression functions with our
own implementation. Move the declarations to `posix_regex.h` for
simpler inclusion.
|
|
e44110db
|
2019-03-20T12:28:45
|
|
Correctly write to missing locked global config
Opening a default config when ~/.gitconfig doesn't exist, locking it,
and attempting to write to it causes an assertion failure.
Treat non-existent global config file content as an empty string.
|
|
bc5b19e6
|
2019-04-29T09:01:45
|
|
Merge pull request #4561 from pks-t/pks/downcasting
[RFC] util: introduce GIT_DOWNCAST macro
|
|
cc8a9892
|
2019-04-16T18:13:31
|
|
config_file: check result of git_array_alloc
git_array_alloc can return NULL if no memory is available, causing
a segmentation fault in memset. This adds GIT_ERROR_CHECK_ALLOC
similar to how other parts of the code base deal with the return
value of git_array_alloc.
|
|
65203b5a
|
2019-04-16T13:21:16
|
|
config_file: make use of `GIT_CONTAINER_OF` macro
|
|
f673e232
|
2018-12-27T13:47:34
|
|
git_error: use new names in internal APIs and usage
Move to the `git_error` name in the internal API for error-related
functions.
|
|
d06d4220
|
2018-10-05T10:56:02
|
|
config_file: properly ignore includes without "path" value
In case a configuration includes a key "include.path=" without any
value, the generated configuration entry will have its value set to
`NULL`. This is unexpected by the logic handling includes, and as soon
as we try to calculate the included path we will unconditionally
dereference that `NULL` pointer and thus segfault.
Fix the issue by returning early in both `parse_include` and
`parse_conditional_include` in case where the `file` argument is `NULL`.
Add a test to avoid future regression.
The issue has been found by the oss-fuzz project, issue 10810.
|
|
b78f4ab0
|
2018-08-16T12:22:03
|
|
config_entries: refactor entries iterator memory ownership
Right now, the config file code requires us to pass in its backend to
the config entry iterator. This is required with the current code, as
the config file backend will first create a read-only snapshot which is
then passed to the iterator just for that purpose. So after the iterator
is getting free'd, the code needs to make sure that the snapshot gets
free'd, as well.
By now, though, we can easily refactor the code to be more efficient and
remove the reverse dependency from iterator to backend. Instead of
creating a read-only snapshot (which also requires us to re-parse the
complete configuration file), we can simply duplicate the config entries
and pass those to the iterator. Like that, the iterator only needs to
make sure to free the duplicated config entries, which is trivial to do
and clears up memory ownership by a lot.
|
|
123e5963
|
2018-08-10T18:59:59
|
|
config_entries: abstract away reference counting
Instead of directly calling `git_atomic_inc` in users of the config
entries store, provide a `git_config_entries_incref` function to further
decouple the interfaces. Convert the refcount to a `git_refcount`
structure while at it.
|
|
5a7e0b3c
|
2018-08-10T18:49:38
|
|
config_entries: abstract away iteration over entries
The nice thing about our `git_config_iterator` interfaces is that nobody
needs to know anything about the implementation details. All that is
required is to obtain the iterator via any backend and then use it by
executing generic functions. We can thus completely internalize all the
implementation details of how to iterate over entries into the config
entries store and simply create such an iterator in our config file
backend when we want to iterate its entries. This further decouples the
config file backend from the config entries store.
|
|
60ebc137
|
2018-08-10T14:53:09
|
|
config_entries: abstract away retrieval of config entries
The code accessing config entries in the `git_config_entries` structure
is still much too intimate with implementation details, directly
accessing the maps and handling indices. Provide two new functions to
get config entries from the internal map structure to decouple the
interfaces and use them in the config file code.
The function `git_config_entries_get` will simply look up the entry by
name and, in the case of a multi-value, return the last occurrence of
that entry. The second function, `git_config_entries_get_unique`, will
only return an entry if it is unique and not included via another
configuration file. This one is required to properly implement write
operations for single entries, as we refuse to write to or delete a
single entry if it is not clear which one was meant.
|
|
fb8a87da
|
2018-08-10T14:50:15
|
|
config_entries: rename functions and structure
The previous commit simply moved all code that is required to handle
config entries to a new module without yet adjusting any of the function
and structure names to help readability. We now rename things
accordingly to have a common "git_config_entries" entries instead of the
old "diskfile_entries" one.
|
|
04f57d51
|
2018-08-10T13:33:02
|
|
config_entries: pull out implementation of entry store
The configuration entry store that is used for configuration files needs
to keep track of all entries in two different structures:
- a singly linked list is being used to be able to iterate through
configuration files in the order they have been found
- a string map is being used to efficiently look up configuration
entries by their key
This store is thus something that may be used by other, future backends
as well to abstract away implementation details and iteration over the
entries.
Pull out the necessary functions from "config_file.c" and moves them
into their own "config_entries.c" module. For now, this is simply moving
over code without any renames and/or refactorings to help reviewing.
|
|
d75bbea1
|
2018-08-10T14:35:23
|
|
config_file: remove unnecessary snapshot indirection
The implementation for config file snapshots has an unnecessary
redirection from `config_snapshot` to `git_config_file__snapshot`.
Inline the call to `git_config_file__snapshot` and remove it.
|
|
b944e137
|
2018-08-10T13:03:33
|
|
config: rename "config_file.h" to "config_backend.h"
The header "config_file.h" has a list of inline-functions to access the
contents of a config backend without directly messing with the struct's
function pointers. While all these functions are called
"git_config_file_*", they are in fact completely backend-agnostic and
don't care whether it is a file or not. Rename all the function to
instead be backend-agnostic versions called "git_config_backend_*" and
rename the header to match.
|
|
1aeff5d7
|
2018-08-10T12:52:18
|
|
config: move function normalizing section names into "config.c"
The function `git_config_file_normalize_section` is never being used in
any file different than "config.c", but it is implemented in
"config_file.c". Move it over and make the symbol static.
|
|
f2694635
|
2018-09-06T14:17:54
|
|
config_file: fix quadratic behaviour when adding config multivars
In case where we add multiple configuration entries with the same key to
a diskfile backend, we always need to iterate the list of this key to
find the last entry due to the list being a singly-linked list. This
is obviously quadratic behaviour, and this has sure enough been found by
oss-fuzz by generating a configuration file with 50k lines, where most
of them have the same key. While the issue will not arise with "sane"
configuration files, an adversary may trigger it by providing a crafted
".gitmodules" file, which is delivered as part of the repo and also
parsed by the configuration parser.
The fix is trivial: store a pointer to the last entry of the list in its
head. As there are only two locations now where we append to this data
structure, mainting this pointer is trivial, too. We can also optimize
retrieval of a single value via `config_get`, where we previously had to
chase the `next` pointer to find the last entry that was added.
Using our configuration file fozzur with a corpus that has a single file
with 50000 "-=" lines previously took around 21s. With this optimization
the same file scans in about 0.053s, which is a nearly 400-fold
improvement. But in most cases with a "normal" amount of same-named keys
it's not going to matter anyway.
|
|
ec76a1aa
|
2018-08-05T14:37:08
|
|
Add a comment
|
|
019409be
|
2018-08-05T14:25:22
|
|
Don't error on missing section, just continue
|
|
c4d7fa95
|
2018-07-22T23:31:19
|
|
config_file: Don't crash on options without a section
|
|
e1e90dcc
|
2018-01-09T14:52:34
|
|
config_file: avoid free'ing OOM buffers
Buffers which ran out of memory will never have any memory attached to
them. As such, it is not necessary to call `git_buf_free` if the buffer
is out of memory.
|
|
e51e29e8
|
2017-11-12T13:59:47
|
|
config_parse: have `git_config_parse` own entry value and name
The function `git_config_parse` uses several callbacks to pass data
along to the caller as it parses the file. One design shortcoming here
is that strings passed to those callbacks are expected to be freed by
them, which is really confusing.
Fix the issue by changing memory ownership here. Instead of expecting
the `on_variable` callbacks to free memory for `git_config_parse`, just
do it inside of `git_config_parse`. While this obviously requires a bit
more memory allocation churn due to having to copy both name and value
at some places, this shouldn't be too much of a burden.
|
|
ecf4f33a
|
2018-02-08T11:14:48
|
|
Convert usage of `git_buf_free` to new `git_buf_dispose`
|
|
6a15f657
|
2018-02-09T13:02:26
|
|
config_file: iterate over keys in the order they were added
Currently, all configuration entries were only held in a string map,
making iteration order mostly based on the hash of each entry's key. Now
that we have extended the `diskfile_entries` structure by a list of
config entries, we can effectively iterate through entries in the order
they were added, though.
|
|
3a82475f
|
2018-02-09T12:49:45
|
|
config_file: add list holding config entries in order of appearance
Right now, we only keep all configuration entries in a string map. This
is required to efficiently access configuration entries by keys. It has
the disadvantage of not being able to iterate through configuration
entries in the order they were read, though. Instead, we only iterate
through entries in a seemingly random order.
Extend `diskfile_entries` by another list holding configuration entries.
Like this, we maintain all entries in two data structures and can use
the required one based on the current use case.
|
|
8c0b0717
|
2018-02-09T12:32:24
|
|
config_file: pass complete entry structure into `append_entry`
Currently, we only parse the entry map into `append_entry` to append new
configuration entries to it. Instead, though, we can just pass the
complete `diskfile_entries` structure into it. This allows us to easily
extend `diskfile_entries` by another singly linked list of configuration
entries.
|
|
eafb8402
|
2018-02-09T12:29:16
|
|
config_file: rename `refcounted_strmap` to `diskfile_entries`
The config file parsing code all revolves around the `refcounted_strmap`
structure, which is a map of entry names to their respective keys. This
naming scheme made grasping the code quite hard, warranting a rename. A
good alternative is `diskfile_entries`, making clear that this really
only holds all configuration entries.
Furthermore, we are about to introduce a new linked list of
configuration entries into the configuration file code. This list will
be used to iterate over configuration entries in the order they are
listed inside of the parsed configuration file. After renaming
`refcounted_strmap` to `diskfile_entries`, this struct also becomes the
natural target where to add that new list. Like this, data structures
holding all entries are neatly contained inside of it.
|
|
e3c8462c
|
2018-02-09T11:50:28
|
|
config_file: rename parse_data struct
The struct `parse_data` sounds as if it was defined and passed to us
from the configuration parser, which is not true. Instead, `parse_data`
is specific to the diskfile backend parsing logic. Rename it to
`diskfile_parse_state` to make that clearer. This also follows existing
naming patterns with the "diskfile" prefix.
|
|
18117a6c
|
2018-02-09T11:43:13
|
|
config_file: use new line to declare new variable
|
|
b6f88706
|
2018-02-09T11:39:26
|
|
config_file: refactor freeing of config entry lists
The interface for freeing config list entries is more tangled than
required. Instead of calling `cvar_free` for every list entry in
`free_vars`, we now just provide a function `config_entry_list_free`.
This function will iterate through all list entries and free the
associated configuration entry as well as the list entry itself.
|
|
2d1f6676
|
2018-02-09T11:35:54
|
|
config_file: rename cvar_t struct to config_entry_list
The `cvar_t` structure is really awkward to grasp, because its name
actively hinders discovery of what it actually is. As it is nothing more
than a singly-linked list of configuration entries, name rename it to
just that: `config_entry_list`.
|
|
26cf48fc
|
2018-02-09T11:35:16
|
|
config_file: move include depth into config entry
In order to reject writes to included configuration entries, we need to
keep track of whether an entry was included via another configuration
file or not. This information is being stored in the `cvar` structure,
which is a rather weird location, as it is only used to create a list
structure of config entries.
Move the include depth into the structure `git_config_entry` instead.
While this fixes the layering issue, it enables users of libgit2 to
access the depth, too.
|
|
fcb0d841
|
2018-02-09T11:19:47
|
|
config_file: move cvar handling into `append_entry`
The code appending new configuration entries to our current list first
allocates the `cvar` structure and then passes it to `append_entry`. As
we want to extend `append_entry` to store configuration entries in a map
as well as in a list for ordered iteration, we will have to create two
`cvar` structures, though. As such, the future change will become much
easier when allocation of the `cvar` structure is doen in `append_entry`
itself.
|
|
dfcd923c
|
2018-02-09T11:15:32
|
|
config_file: remove unused list iteration macros
We currently provide a lot of macros for the `cvar_t` structure which
are never being used. In fact, the only macro we need is to access the
`next` pointer of `cvar_t`, which really does not require a macro at
all.
Remove all these macros and replace usage of `CVAR_LIST_NEXT(cvar)` with
`cvar->next`.
|
|
9cd0c6f1
|
2018-02-28T16:01:16
|
|
config: return an error if config_refresh is called on a snapshot
Instead of treating it as a no-op, treat it as a programming error and return
the same kind of error as if you called to set or delete variables on a
snapshot.
|
|
2424e64c
|
2018-02-28T12:06:02
|
|
config: harden our use of the backend objects a bit
When we create an iterator we don't actually know that we have a live config
object and we must instead only rely on the header. We fixed it to use this in a
previous commit, but this makes it harder to misuse by converting to use the
header object in the typecast.
We also guard inside the `config_refresh` function against being given a
snapshot (although callers right now do check).
|
|
1785de4e
|
2018-02-28T11:46:17
|
|
config: move the level field into the header
We use it in a few places where we might have a full object or a snapshot so
move it to where we can actually access it.
|
|
c1524b2e
|
2018-02-28T11:33:11
|
|
config: move the repository to the diskfile header
We pass this around and when creating a new iterator we need to read the
repository pointer.
Put it in a common place so we can reach it regardless of whether we got a full
object or a snapshot.
|
|
9e66590b
|
2017-07-21T13:01:43
|
|
config_parse: use common parser interface
As the config parser is now cleanly separated from the config file code,
we can easily refactor the code and make use of the common parser
module. This removes quite a lot of duplicated functionality previously
used for handling the actual parser state and replaces it with the
generic interface provided by the parser context.
|
|
1953c68b
|
2017-11-11T17:12:31
|
|
config_file: split out module to parse config files
The configuration file code grew quite big and intermingles both actual
configuration logic as well as the parsing logic of the configuration
syntax. This makes it hard to refactor the parsing logic on its own and
convert it to make use of our new parsing context module.
Refactor the code and split it up into two parts. The config file code
will only handle actual handling of configuration files, includes and
writing new files. The newly created config parser module is then only
responsible for parsing the actual contents of a configuration file,
leaving everything else to callbacks provided to its provided function
`git_config_parse`.
|
|
42627933
|
2017-11-04T18:03:26
|
|
Merge remote-tracking branch 'upstream/master' into pks/conditional-includes
|
|
1475b981
|
2017-11-04T18:00:56
|
|
config: keep the output parameter at the start of the function
|
|
94e30d9b
|
2017-10-30T15:55:18
|
|
config: check for OOM when writing
|
|
8ec806d7
|
2017-10-30T06:23:31
|
|
config: preserve the original case when writing out new sections and vars
For sections we will still use the existing one even if the case disagrees, but
the variable always gets written with the case given by the caller.
|
|
f7d837c8
|
2017-05-24T12:12:29
|
|
config_file: implement "gitdir/i" conditional
Next to the "gitdir" conditional for including other configuration
files, there's also a "gitdir/i" conditional. In contrast to the former
one, path matching with "gitdir/i" is done case-insensitively. This
commit implements the case-insensitive condition.
|
|
071b6c06
|
2017-05-24T11:13:36
|
|
config_file: implement conditional "gitdir" includes
Upstream git.git has implemented the ability to include other
configuration files based on conditions. Right now, this only includes
the ability to include a file based on the gitdir-location of the
repository the currently parsed configuration file belongs to. This
commit implements handling these conditional includes for the
case-sensitive "gitdir" condition.
|
|
9d7a75be
|
2017-08-25T19:15:00
|
|
config_file: make repo and config path accessible to reader
The reader machinery will be extended to handle conditional includes.
The only conditions that currently exist all match the against the git
directory of the repository the config file belongs to. As such, we need
to have access to the repository when reading configuration files to
properly handle these conditions.
One specialty of thes conditional includes is that the actual pattern
may also be a relative pattern starting with "./". In this case, we have
to match the pattern against the path relative to the config file which
is currently being parsed. So besides the repository, we also have to
pass down the path to the current config file that is being parsed.
|
|
d5b9d9e9
|
2017-05-23T10:53:49
|
|
config_file: extract function to parse include path
The logic inside this function will be required later on, when
implementing conditional includes. Extract it into its own function to
ease the implementation.
|
|
529e873c
|
2017-05-23T11:51:00
|
|
config: pass repository when opening config files
Our current configuration logic is completely oblivious of any
repository, but only cares for actual file paths. Unfortunately, we are
forced to break this assumption by the introduction of conditional
includes, which are evaluated in the context of a repository. Right now,
only one conditional exists with "gitdir:" -- it will only include the
configuration if the current repository's git directory matches the
value passed to "gitdir:".
To support these conditionals, we have to break our API and make the
repository available when opening a configuration file. This commit
extends the `open` call of configuration backends to include another
repository and adjusts existing code to have it available. This includes
the user-visible functions `git_config_add_file_ondisk` and
`git_config_add_backend`.
|
|
1560b580
|
2017-08-15T10:35:47
|
|
Merge pull request #4288 from pks-t/pks/include-fixups
Include fixups
|
|
1b329089
|
2017-05-31T22:27:19
|
|
config_file: refuse modifying included variables
Modifying variables pulled in by an included file currently succeeds,
but it doesn't actually do what one would expect, as refreshing the
configuration will cause the values to reappear. As we are currently not
really able to support this use case, we will instead just return an
error for deleting and setting variables which were included via an
include.
|
|
28c2cc3d
|
2017-05-31T16:41:44
|
|
config_file: move reader into `config_read` only
Right now, we have multiple call sites which initialize a `reader`
structure. As the structure is only actually used inside of
`config_read`, we can instead just move the reader inside of the
`config_read` function. Instead, we can just pass in the configuration
file into `config_read`, which eases code readability.
|
|
83bcd3a1
|
2017-05-31T22:45:25
|
|
config_file: refresh all files if includes were modified
Currently, we only re-parse the top-level configuration file when it has
changed itself. This can cause problems when an include is changed, as
we were not updating all values correctly.
Instead of conditionally reparsing only refreshed files, the logic
becomes much clearer and easier to follow if we always re-parse the
top-level configuration file when either the file itself or one of its
included configuration files has changed on disk. This commit implements
this logic.
Note that this might impact performance in some cases, as we need to
re-read all configuration files whenever any of the included files
changed. It could increase performance to just re-parse include files
which have actually changed, but this would compromise maintainability
of the code without much gain. The only case where we will gain anything
is when we actually use includes and when only these includes are
updated, which will probably be quite an unusual scenario to actually be
worthwhile to optimize.
|
|
56a7a264
|
2017-05-31T14:50:40
|
|
config_file: remove unused backend field from parse data
The backend passed to `config_read` is never actually used anymore, so
we can remove it from the function and the `parse_data` structure.
|
|
3a7f7a6e
|
2017-05-31T14:43:46
|
|
config_file: pass reader directly to callbacks
Previously, the callbacks passed to `config_parse` got the reader via a
pointer to a pointer. This allowed the callbacks to update the callers
`reader` variable when the array holding it has been reallocated. As the
array is no longer present, we can simply the code by making the reader
a simple pointer.
|
|
73df75d8
|
2017-05-31T14:34:48
|
|
config_file: refactor include handling
Current code for configuration files uses the `reader` structure to
parse configuration files and store additional metadata like the file's
path and checksum. These structures are stored within an array in the
backend itself, which causes multiple problems.
First, it does not make sense to keep around the file's contents with
the backend itself. While this data is usually free'd before being added
to the backend, this brings along somewhat intricate lifecycle problems.
A better solution would be to store only the file paths as well as the
checksum of the currently parsed content only.
The second problem is that the `reader` structures are stored inside an
array. When re-parsing configuration files due to changed contents, we
may cause this array to be reallocated, requiring us to update pointers
hold by callers. Furthermore, we do not keep track of includes which
are already associated to a reader inside of this array. This causes us
to add readers multiple times to the backend, e.g. in the scenario of
refreshing configurations.
This commit fixes these shortcomings. We introduce a split between the
parsing data and the configuration file's metadata. The `reader` will
now only hold the file's contents and the parser state and the new
`config_file` structure holds the file's path and checksum. Furthermore,
the new structure is a recursive structure in that it will also hold
references to the files it directly includes. The diskfile is changed to
only store the top-level configuration file.
These changes allow us further refactorings and greatly simplify
understanding the code.
|
|
0c7f49dd
|
2017-06-30T13:39:01
|
|
Make sure to always include "common.h" first
Next to including several files, our "common.h" header also declares
various macros which are then used throughout the project. As such, we
have to make sure to always include this file first in all
implementation files. Otherwise, we might encounter problems or even
silent behavioural differences due to macros or defines not being
defined as they should be. So in fact, our header and implementation
files should make sure to always include "common.h" first.
This commit does so by establishing a common include pattern. Header
files inside of "src" will now always include "common.h" as its first
other file, separated by a newline from all the other includes to make
it stand out as special. There are two cases for the implementation
files. If they do have a matching header file, they will always include
this one first, leading to "common.h" being transitively included as
first file. If they do not have a matching header file, they instead
include "common.h" as first file themselves.
This fixes the outlined problems and will become our standard practice
for header and source files inside of the "src/" from now on.
|
|
a693b873
|
2017-06-07T10:20:44
|
|
buffer: use `git_buf_init` with length
The `git_buf_init` function has an optional length parameter, which will
cause the buffer to be initialized and allocated in one step. This can
be used instead of static initialization with `GIT_BUF_INIT` followed by
a `git_buf_grow`. This patch does so for two functions where it is
applicable.
|
|
a1023a43
|
2017-05-20T17:18:07
|
|
Merge pull request #4179 from libgit2/ethomson/expand_tilde
Introduce home directory expansion function for config files, attribute files
|
|
4467aeac
|
2017-03-28T09:00:48
|
|
config_file: handle errors other than OOM while parsing section headers
The current code in `parse_section_header_ext` is only prepared to
properly handle out-of-memory conditions for the `git_buf` structure.
While very unlikely and probably caused by a programming error, it is
also possible to run into error conditions other than out-of-memory
previous to reaching the actual parsing loop. In these cases, we will
run into undefined behavior as the `rpos` variable is only initialized
after these triggerable errors, but we use it in the cleanup-routine.
Fix the issue by unifying the function's cleanup code with an
`end_error` section, which will not use the `rpos` variable.
|
|
29aef948
|
2017-03-23T11:59:06
|
|
config, attrcache: don't fallback to dirs literally named `~`
The config and attrcache file reading code would attempt to load a file
in a home directory by expanding the `~` and looking for the file, using
`git_sysdir_find_global_file`. If the file was not found, the error
handling would look for the literal path, eg `~/filename.txt`.
Use the new `git_config_expand_global_file` instead, which allows us to
get the path to the file separately, when the path is prefixed with
`~/`, and fail with a not found error without falling back to looking
for the literal path.
|
|
301dc26a
|
2016-06-20T13:15:35
|
|
fix error when including a missing config file relative to the home directory
|
|
2cf48e13
|
2017-03-20T09:34:41
|
|
config_file: check if section header buffer runs out of memory
While parsing section headers, we use a buffer to store the actual
section name. We do not check though if the buffer runs out of memory at
any stage. Do so.
|
|
13c3bc9a
|
2017-01-27T14:32:23
|
|
strmap: remove GIT__USE_STRMAP macro
|
|
73028af8
|
2017-01-27T14:20:24
|
|
khash: avoid using macro magic to get return address
|
|
909d5494
|
2016-12-29T12:25:15
|
|
giterr_set: consistent error messages
Error messages should be sentence fragments, and therefore:
1. Should not begin with a capital letter,
2. Should not conclude with punctuation, and
3. Should not end a sentence and begin a new one
|
|
ab96ca55
|
2016-10-06T13:15:31
|
|
Make sure we use the `C` locale for `regcomp` on macOS.
|
|
2f0450f4
|
2016-03-29T03:26:43
|
|
Merge pull request #3712 from ethomson/config_duplicate_section
config: don't write duplicate section
|
|
e25e1ca1
|
2016-03-28T11:13:51
|
|
config: don't write section header if we're in it
If we hit the EOF while trying to write a new value, it may be that
we're already in the section that we were looking for. If so, do not
write a (duplicate) section header, just write the value.
|
|
6f09911c
|
2016-03-21T21:10:26
|
|
config: don't special-case multivars that don't exist yet
This special-casing ignores that we might have a locked file, so the
hashtable does not represent the contents of the file we want to
write. This causes multivar writes to overwrite entries instead of add
to them when under lock.
There is no need for this as the normal code-path will write to the file
just fine, so simply get rid of it.
|
|
77394a27
|
2016-03-14T19:15:20
|
|
Merge pull request #3677 from pks-t/pks/coverity-fixes-round7
Coverity fixes round 7
|
|
836447e5
|
2016-03-10T16:52:09
|
|
config_file: handle error when trying to lock strmap
Accessing the current values map is handled through the
`refcounder_strmap_take` function, which first acquires a mutex
before accessing its values. While this assures everybody is
trying to access the values with the mutex only we do not check
if the locking actually succeeds.
Fix the issue by checking if acquiring the lock succeeds and
returning `NULL` if we encounter an error. Adjust callers.
|
|
e126bc95
|
2016-03-01T14:40:17
|
|
config_file: handle missing quotation marks in section header
When parsing a section header we expect something along the
format of '[section "subsection"]'. When a section is
mal-formated and is entirely missing its quotation marks we catch
this case by observing that `strchr(line, '"') - strrchr(line,
'"') = NULL - NULL = 0` and error out. Unfortunately, the error
message is misleading though, as we state that we are missing the
closing quotation mark while we in fact miss both quotation
marks.
Improve the error message by explicitly checking if the first
quotation mark could be found and, if not, stating that quotation
marks are completely missing.
|
|
eb597799
|
2015-10-29T21:12:37
|
|
filebuf: use a checksum to detect file changes
Instead of relying on the size and timestamp, which can hide changes
performed in the same second, hash the file content's when we care about
detecting changes.
|
|
cd677b8f
|
2015-09-18T12:28:05
|
|
config: buffer comments to match git's variable-adding
When there is a comment at the end of a section, git keeps it there,
while we write the new variable right at the end.
Keep comments buffered and dump them when we're going to output a
variable or section, or reach EOF. This puts us in line with the config
files which git produces.
|
|
b1667039
|
2015-06-01T19:17:03
|
|
config: implement basic transactional support
When a configuration file is locked, any updates made to it will be done
to the in-memory copy of the file. This allows for multiple updates to
happen while we hold the lock, preventing races during complex
config-file manipulation.
|