kmx git

Commit	Date	Message
f7ceef06	2013-05-24T03:24:27	Merge pull request #1592 from ethomson/merge_setup merge setup
4811c150	2013-05-24T01:14:52	Merge pull request #1603 from ben/shallow Shallow-clone detection
30caf0cf	2013-05-24T01:13:48	Merge pull request #1595 from arrbee/even-more-rename-fixes Even more rename detection fixes
3b32b6d3	2013-05-23T09:19:42	More tests of config with various absent files Plus a bit of extra paranoia to ensure config object has valid contents.
49f70f2c	2013-05-23T15:48:06	Fill out diff rename test coverage This extends the rename tests to make sure that every rename scenario in the inner loop of git_diff_find_similar is actually exercised. Also, fixes an incorrect assert that was in one of the clauses that was not previously being exercised.
93d8f77f	2013-05-23T15:11:53	Improve test failure output
67db583d	2013-05-23T15:06:07	More diff rename tests; better split swap handling This adds a couple more tests of different rename scenarios. Also, this fixes a problem with the case where you have two "split" deltas and the left half of one matches the right half of the other. That case was already being handled, but in the wrong order in a way that could result in bad output. Also, if the swap also happened to put the other two halves into the correct place (i.e. two files exchanged places with each other), then the second delta was left with the SPLIT flag set when it really should be cleared.
06c070b5	2013-05-23T09:43:56	Add testcase for #1600
a21cbb12	2013-05-22T10:37:12	Significant rename detection rewrite This flips rename detection around so instead of creating a forward mapping from deltas to possible rename targets, instead it creates a reverse mapping, looking at possible targets and trying to find a source that they could have been renamed or copied from. This is important because each output can only have a single source, but a given source could map to multiple outputs (in the form of COPIED records). Additionally, this makes a couple of tweaks to the public rename detection APIs, mostly renaming a couple of options that control the behavior to make more sense and to be more like core Git. I walked through the tests looking at the exact results and updated the expectations based on what I saw. The new code is different from the old because it cannot give some nonsense results (like A was renamed to both B and C) which were part of the outputs previously.
b81cc1d6	2013-05-18T16:52:16	tag: Introduce git_tag_annotation_create()
4742148d	2013-05-20T13:41:39	Add more diff rename detection tests This adds a bunch more rename detection tests including checks vs the working directory, the new exact match options, some more whitespace variants, etc. This also adds a git_futils_writebuffer helper function and uses it in checkout. This is mainly added because I wanted an easy way to write out a git_buf to disk inside my test code.
d958e37a	2013-05-17T17:21:45	Fix issues with git_diff_find_similar There are a number of bugs in the rename code that only were obvious when I started testing it against large old repos with more complex patterns. (The code to do that testing is not ready to merge with libgit2, but I do plan to add more thorough tests.) This contains a significant number of changes and also tweaks the public API slightly to make emulating core git easier. Most notably, this separates the GIT_DIFF_FIND_AND_BREAK_REWRITES flag into FIND_REWRITES (which adds a self-similarity score to every modified file) and BREAK_REWRITES (which splits the modified deltas into add/remove pairs in the diff list). When you do a raw output of core git, rewrites show up as M090 or such, not at A and D output, so I wanted to be able to emulate that. Publicly, this also changes the flags to be uint16_t since we don't need values out of that range. Internally, this contains significant changes from a number of small bug fixes (like using the wrong side of the diff to decide if the object could be found in the ODB vs the workdir) to larger issues about which files can and should be compared and how the various edge cases of similarity scores should be treated. Honestly, I don't think this is the last update that will have to be made to this code, but I think this moves us closer to correct behavior and I tried to document the code so it would be easier to follow..
660d59ca	2013-05-17T16:40:00	Add git_oid_nfmt - a flexible OID formatter I frequently want to the the first N digits of an OID formatted as a string and I'd like it to be efficient. This function makes that easy and I could rewrite the OID formatters in terms of it.
9c06b250	2013-05-16T13:04:37	merge setup
f672cd2a	2013-05-10T20:15:57	revparse: Make revparse_ext() return git_reference from names as well
e841c533	2013-05-09T16:42:39	revparse: Introduce git_revparse_ext() Expose a way to retrieve, along with the target git_object, the reference pointed at by some revparse expression (`@{<-n>}` or `<branchname>@{upstream}` syntax).
96c01991	2013-05-15T09:24:51	Remove entry dup/free functions and fix comments This removes the functions to duplicate and free copies of a git_index_entry and updates the comments to explain that you should just use the public definition of the struct as needed.
797dfb28	2013-05-13T16:09:33	Add APIs to dup and free git_index_entrys This adds git_index_entry_dup to make a copy of an existing entry and git_index_entry_free to release the memory of the copy. It also updates the documentation for git_index_get_bypath and git_index_get_byindex to make it clear that the returned structure should not be modified.
71596200	2013-05-15T15:47:46	Merge pull request #1588 from arrbee/fixes-for-checkout-and-diff Bug fixes for checkout and diff
79ef3be4	2013-05-15T14:50:05	Fix diff crash when last item is untracked dir When the last item in a diff was an untracked directory that only contained ignored items, the loop to scan the contents would run off the end of the iterator and dereference a NULL pointer. This includes a test that reproduces the problem and a fix.
1fed6b07	2013-05-13T21:57:37	Fix trailing whitespaces
f0ab7372	2013-05-15T17:51:57	signature: Lenient when dupping, strict when creating
bc2020d6	2013-05-14T16:39:19	Extend valgrind suppressions on Mac
b4d33e46	2013-05-14T21:54:26	Fix some memory leaks
99d32707	2013-05-11T06:42:25	Fix refdb iteration early termination bug There was a problem found in the Rugged test suite where the refdb_fs_backend__next function could exit too early in some very specific hashing patterns for packed refs. This ports the Rugged test to libgit2 and then fixes the bug.
b6cc559a	2013-05-11T02:42:49	Merge pull request #1385 from carlosmn/refs-iter Introduce a refs iterator
c58cac12	2013-05-04T18:06:14	Introduce a glob-filtering iterator If the backend doesn't provide support for it, the matching is done in refdb on top of a normal iterator.
2b562c3a	2013-05-04T16:32:58	refs: remove the OID/SYMBOLIC filtering Nobody should ever be using anything other than ALL at this level, so remove the option altogether. As part of this, git_reference_foreach_glob is now implemented in the frontend using an iterator. Backends will later regain the ability of doing the glob filtering in the backend.
932af0e9	2013-05-04T15:57:44	Add iterator support to the testdb backend
fb592a96	2013-05-04T15:54:57	Remove outdated test Selecting wether to list loose or packed references is not something we want to support anymore, so remove a test for this.
51fc5e89	2013-05-04T15:16:55	Make sure the ref iterator works in an repo without physical presence
4def7035	2013-03-02T19:31:03	refs: introduce an iterator This allows us to get a list of reference names in a loop instead of callbacks.
4a65aead	2013-05-10T10:49:22	Merge pull request #1571 from arrbee/what-if-ignorecase-lies Improve ignore handling in git_status_file
c3a51711	2013-05-10T10:47:08	Merge pull request #1572 from arrbee/diff-patch-with-rename Fix diff output for renames and copies
24988894	2013-05-10T12:02:17	Fix some memory leaks
e9ba61f3	2013-05-10T09:32:42	Fix diff output for renames and copies If you use rename detection, the renamed and copied files would not show any text diffs because the function that decides if data should be loaded didn't know which sides of the diff to load for those cases. This adds a test that looks at the patch generated for diff entries that are COPIED or RENAMED.
1f9e41ee	2013-05-10T07:50:53	Improve ignore handling in git_status_file The git_status_file API was doing a hack to deal with files that are inside ignored directories. The status scan was not reporting any file in this case, so git_status_file would attempt a final "stat()" call, and return IGNORED if the file actually existed. On case-insensitive filesystems where core.ignorecase is set incorrectly, this magic check can "succeed" and report a file as ignored when it should actually return ENOTFOUND. Now that we have the GIT_STATUS_OPT_RECURSE_IGNORED_DIRS, we can use that flag to make sure that git_status_file() will look into ignored directories and eliminate the hack completely, so we give the correct error.
3d1c9f61	2013-05-09T06:45:06	Fix git_repository_message docs This clarifies the docs for git_repository_message and also adds to the tests to explicitly check NUL termination of data when the output buffer is smaller than the message size. There is a minor behavior change so that a non-NULL output buffer will always be NUL terminated (at length zero) if an error occurs.
ddc5c054	2013-05-09T05:42:37	Merge pull request #1561 from arrbee/fix-windows-diff-eofnl Fix windows diff eofnl error
af795759	2013-05-07T15:09:11	Merge pull request #1552 from carlosmn/config-helpers Config helpers for global/xdg config files
5d831887	2013-05-07T00:10:02	config: convenience function to open global/xdg The rules for which one to open is a bit silly, so let's make it easier for our users.
a4b75dcf	2013-05-06T21:51:25	repo: unconditionally create a global config backend When a repository is initialised, we need to probe to see if there is a global config to load. If this is not the case, the user isn't able to write to the global config without creating the backend and adding it themselves, which is inconvenient and overly complex. Unconditionally create and add a backend for the global config file regardless of whether it exists as a convenience for users. To enable this, we allow creating backends to files that do not exist yet, changing the semantics somewhat, and making some tests invalid.
0f938c6b	2013-05-07T09:59:53	Fix win32 type warnings
505b5d0c	2013-05-07T16:01:22	remote: correctly interpret tagopt '--tags' When tagopt is set to '--tags', we should only take the default tags refspec into account and ignore any configured ones. Bring the code into compliance.
33665410	2013-05-07T08:00:44	Merge pull request #1556 from arrbee/diff-patch-fixes Diff patch bug fixes
c2f602f8	2013-05-07T07:15:39	Fix line numbering for patches with eofnl When a patch contained an eofnl change (i.e. the last line either gained or lost a newline), the oldno and newno line number values for the lines in the last hunk of the patch were not useful. This makes them behave in a more expected manner.
fd96f98e	2013-05-07T04:36:42	More tests for files with no newline at end
e35e2684	2013-05-07T04:32:17	Add GIT_DIFF_LINE_CONTEXT_EOFNL This adds a new line origin constant for the special line that is used when both files end without a newline. In the course of writing the tests for this, I was having problems with modifying a file but not having diff notice because it was the same size and modified less than one second from the start of the test, so I decided to start working on nanosecond timestamp support. This commit doesn't contain the nanosecond support, but it contains the reorganization of maybe_modified and the hooks so that if the nanosecond data were being read by stat() (or rather being copied by git_index_entry__init_from_stat), then the nsec would be taken into account. This new stuff could probably use some more tests, although there is some amount of it here.
3d42e9a3	2013-05-06T20:32:20	git_branch_set_upstream with local branches Currently git_branch_set_upstream when passed a local branch creates invalid configuration, for ex. if we setup branch 'tracking_master' to track local 'master' libgit2 generates the following config ``` [branch "track_master"] remote = . merge = .refs/heads/track_master ``` The merge value is invalid and calling git_branch_upstream on 'tracking_master' results in invalid reference error. It should do: ``` [branch "track_master"] remote = . merge = refs/heads/master ```
03c28d92	2013-05-06T06:45:53	Merge pull request #1526 from arrbee/cleanup-error-return-without-msg Make sure error messages are set for most error returns
d5e5bbd7	2013-05-06T06:45:40	Merge pull request #1524 from jamill/clone_tagopts By default do not set tagopt when cloning
6f748f38	2013-05-04T12:14:40	Do not write tagopt configuration option on clone by default
6e286e8d	2013-05-04T01:04:23	Remove obsolete test for peel type Peeling to an invalid type is now checked via an assert so this test is no longer relevant.
e09d18ee	2013-05-03T18:39:44	allow checkout to proceed when a dir to be removed is in use (win32)
d8041638	2013-05-02T17:22:13	fix some leaks
5e151329	2013-05-02T15:19:49	braces
4e7c1560	2013-05-02T14:58:40	puns are not funny; type punning especially so
7edb9071	2013-05-02T11:07:20	refdb_fs: do not require peeled packed refs to be tags Older versions of git would only write peeled entries for items under refs/tags/. Newer versions will write them for all refs, and we should be prepared to handle that.
d82d66c9	2013-05-02T03:05:21	Extra threading tests We need to hammer the packfile open phase harder in the thread tests, in addition to the cache API.
0cc7d8df	2013-05-01T09:50:40	allow empty dirs to exist when doing checkout
e1807113	2013-05-01T15:31:23	merge: Warning noise
3e199f42	2013-05-01T04:18:46	Set error message for branch functions There were a couple of places where an error was being returned from branch related code but no error message was being set.
75d1c8c6	2013-04-30T17:33:11	move NAME and REUC extensions to sys/
0462fba5	2013-04-30T14:56:41	renames!
bec65a5e	2013-04-01T22:16:21	merge!
a66c4bc8	2013-04-29T02:57:01	More tests for diff untracked directories This includes more tests for various scenarios when diff includes an untracked directory in the workdir with contents either ignored or not.
e26b14c0	2013-04-26T15:35:47	Update diff handling of untracked directories When diff encounters an untracked directory, there was a shortcut that it took which is not compatible with core git. This makes the default behavior no longer take that shortcut and instead look inside the untracked directory to see if there are any untracked files within it. If there are not, then the directory is treated as an ignore directory instead of an untracked directory. This has implications for the git_status APIs.
cd2ed9f0	2013-04-30T04:02:52	Merge pull request #1518 from arrbee/export-oid-comparison Remove most inlines from the public API
d76fb20e	2013-04-30T03:29:48	Merge pull request #1520 from carlosmn/nth-refspec Add refspec list accessors
0a1755c0	2013-04-30T03:15:45	Catch issue in config set with no config file This prevents a segfault when setting a value in the config of a repository that doesn't have a config file.
1ffd0806	2013-04-30T11:18:16	remote: add resfpec list accessors Bring back a way of acessing the git_refspec* from a remote. Closes #1514
aa8f0101	2013-04-29T08:59:46	Add git_oid_strcmp and use it for git_oid_streq Add a new git_oid_strcmp that compares a string OID with a hex oid for sort order, and then reimplement git_oid_streq using it. This actually should speed up git_oid_streq because it only reads as far into the string as it needs to, whereas previously it would convert the whole string into an OID and then use git_oid_cmp.
8564a022	2013-04-29T08:51:24	Fix fragile git_oid_ncmp git_oid_ncmp was making some assumptions about the length of the data - this shifts the check to the top of the loop so it will work more robustly, limits the max, and adds some tests to verify the functionality.
d8488457	2013-04-28T16:26:55	remote: dwim the refspecs according to the remote's advertised refs As git allows you to store shorthand refspecs in the configuration, we need to do this ourselves.
528a4e24	2013-04-28T14:16:45	Parse shorthand refspecs as valid Relax the ONELEVEL ref naming rules so the refspec parsing code can ask for 'master' to be considered valid.
b1ff7004	2013-04-22T16:25:57	Improve diff config options handling This makes diff use the cvar cache for config options where possible, and also adds support for a number of other config options to diff including "diff.context", "diff.ignoreSubmodules", "diff.noprefix", "diff.mnemonicprefix", and "core.abbrev". To make this natural, this involved a rearrangement of the code that allocates the diff object vs. the code that initializes it based on the combination of options passed in by the user and read from the config. This commit includes tests for most of these new options as well.
bd0a07f4	2013-04-23T12:28:59	Clone: replace fetch spec with custom value
dfdf709e	2013-04-23T21:29:07	get last refspec in clone test
05b17964	2013-04-21T19:26:35	Make refcounting atomic
d8771592	2013-04-22T17:04:52	cache: Max cache size, and evict when the cache fills up
cf9709b6	2013-04-22T16:53:46	tests: Do not warn for unused variable
865e2dd4	2013-04-17T23:58:37	tests: Cleanup commit parse testing code
38eef611	2013-04-16T14:19:27	Make indexer use shared packfile open code The indexer was creating a packfile object separately from the code in pack.c which was a problem since I put a call to git_mutex_init into just pack.c. This commit updates the pack function for creating a new pack object (i.e. git_packfile_check()) so that it can be used in both places and then makes indexer.c use the shared initialization routine. There are also a few minor formatting and warning message fixes.
3f27127d	2013-04-16T11:51:02	Simplify object table parse functions This unifies the object parse functions into one signature that takes an odb_object.
78606263	2013-04-15T00:05:44	Add callback to git_objects_table This adds create and free callback to the git_objects_table so that more of the creation and destruction of objects can be table driven instead of using switch statements. This also makes the semantics of certain object creation functions consistent so that we can make better use of function pointers. This also fixes a theoretical error case where an object allocation fails and we end up storing NULL into the cache.
917f60c5	2013-04-12T13:04:08	Add tests for oidmap and new cache with threading This adds some basic tests for the oidmap just to make sure that collisions, etc. are dealt with correctly. This also adds some tests for the new caching that check if items are inserted (or not inserted) properly into the cache, and that the cache can hold up in a multithreaded environment without error.
8842c75f	2013-04-03T22:30:07	What has science done.
5df18424	2013-04-01T19:38:23	lol this worked first try wtf
a472f887	2013-04-22T07:44:32	Merge pull request #1493 from carlosmn/remotes Revamp the refspec handling
21ca0451	2013-04-21T12:52:17	Move git_reference__alloc to include/git2/sys Create a new include/git2/sys/refs.h and move the reference alloc functions there. Also fix some documentation issues and some minor code cleanups.
4dcd8780	2013-04-19T17:17:44	Move refdb_backend to include/git2/sys This moves most of the refdb stuff over to the include/git2/sys directory, with some minor shifts in function organization. While I was making the necessary updates, I also removed the trailing whitespace in a few files that I modified just because I was there and it was bugging me.
1384b688	2013-04-19T13:00:12	Move some low-level repo fns to include/git2/sys
83cc70d9	2013-04-19T12:48:33	Move odb_backend implementors stuff into git2/sys This moves some of the odb_backend stuff that is related to the internals of an odb_backend implementation into include/git2/sys. Some of the stuff related to streaming I left in include/git2 because it seemed like it would be reasonably needed by a normal user who wanted to stream objects into and out of the ODB. Also, I added APIs for traversing the list of backends so that some of the tests would not need to access ODB internals.
83041c71	2013-04-19T11:52:04	Move git_config_backend to include/git2/sys Moving backend implementor objects into include/git2/sys so the APIs can be isolated from the ones that normal libgit2 users would be likely to use.
1be680c4	2013-04-20T19:13:47	refspec: unify the string and parsed data It used to be separate as an attempt to make the querying easier, but it didn't work out that way, so put all the data together. Add git_refspec_string() as well to get the original string, which is now stored alongside the independent parts.
bc6374ea	2013-04-20T18:49:11	remote: allow querying for refspecs Introduce git_remote_{fetch,push}_refspecs() to get a list of refspecs from the remote and rename the refspec-adding functions to a less silly name. Use this instead of the vector index hacks in the tests.
4330ab26	2013-04-20T04:43:28	remote: handle multiple refspecs A remote can have a multitude of refspecs. Up to now our git_remote's have supported a single one for each fetch and push out of simplicity to get something working. Let the remotes and internal code know about multiple remotes and get the tests passing with them. Instead of setting a refspec, the external users can clear all and add refspecs. This should be enough for most uses, though we're still missing a querying function.
e5a27f03	2013-04-20T15:25:39	config: allow setting multivars when none exist yet Adding a multivar when there are no variables with that name set should set the variable instead of failing.
8f24e65f	2013-04-20T16:20:21	Plug a couple of leaks
4e4eab52	2013-04-19T18:19:53	alloc doesn't take a refdb; git_refdb_free nicely in the tests

f7ceef06

2013-05-24T03:24:27

Merge pull request #1592 from ethomson/merge_setup merge setup

4811c150

2013-05-24T01:14:52

Merge pull request #1603 from ben/shallow Shallow-clone detection

30caf0cf

2013-05-24T01:13:48

Merge pull request #1595 from arrbee/even-more-rename-fixes Even more rename detection fixes

3b32b6d3

2013-05-23T09:19:42

More tests of config with various absent files Plus a bit of extra paranoia to ensure config object has valid contents.

49f70f2c

2013-05-23T15:48:06

Fill out diff rename test coverage This extends the rename tests to make sure that every rename scenario in the inner loop of git_diff_find_similar is actually exercised. Also, fixes an incorrect assert that was in one of the clauses that was not previously being exercised.

93d8f77f

2013-05-23T15:11:53

Improve test failure output

67db583d

2013-05-23T15:06:07

More diff rename tests; better split swap handling This adds a couple more tests of different rename scenarios. Also, this fixes a problem with the case where you have two "split" deltas and the left half of one matches the right half of the other. That case was already being handled, but in the wrong order in a way that could result in bad output. Also, if the swap also happened to put the other two halves into the correct place (i.e. two files exchanged places with each other), then the second delta was left with the SPLIT flag set when it really should be cleared.

06c070b5

2013-05-23T09:43:56

Add testcase for #1600

a21cbb12

2013-05-22T10:37:12

Significant rename detection rewrite This flips rename detection around so instead of creating a forward mapping from deltas to possible rename targets, instead it creates a reverse mapping, looking at possible targets and trying to find a source that they could have been renamed or copied from. This is important because each output can only have a single source, but a given source could map to multiple outputs (in the form of COPIED records). Additionally, this makes a couple of tweaks to the public rename detection APIs, mostly renaming a couple of options that control the behavior to make more sense and to be more like core Git. I walked through the tests looking at the exact results and updated the expectations based on what I saw. The new code is different from the old because it cannot give some nonsense results (like A was renamed to both B and C) which were part of the outputs previously.

b81cc1d6

2013-05-18T16:52:16

tag: Introduce git_tag_annotation_create()

4742148d

2013-05-20T13:41:39

Add more diff rename detection tests This adds a bunch more rename detection tests including checks vs the working directory, the new exact match options, some more whitespace variants, etc. This also adds a git_futils_writebuffer helper function and uses it in checkout. This is mainly added because I wanted an easy way to write out a git_buf to disk inside my test code.

d958e37a

2013-05-17T17:21:45

Fix issues with git_diff_find_similar There are a number of bugs in the rename code that only were obvious when I started testing it against large old repos with more complex patterns. (The code to do that testing is not ready to merge with libgit2, but I do plan to add more thorough tests.) This contains a significant number of changes and also tweaks the public API slightly to make emulating core git easier. Most notably, this separates the GIT_DIFF_FIND_AND_BREAK_REWRITES flag into FIND_REWRITES (which adds a self-similarity score to every modified file) and BREAK_REWRITES (which splits the modified deltas into add/remove pairs in the diff list). When you do a raw output of core git, rewrites show up as M090 or such, not at A and D output, so I wanted to be able to emulate that. Publicly, this also changes the flags to be uint16_t since we don't need values out of that range. Internally, this contains significant changes from a number of small bug fixes (like using the wrong side of the diff to decide if the object could be found in the ODB vs the workdir) to larger issues about which files can and should be compared and how the various edge cases of similarity scores should be treated. Honestly, I don't think this is the last update that will have to be made to this code, but I think this moves us closer to correct behavior and I tried to document the code so it would be easier to follow..

660d59ca

2013-05-17T16:40:00

Add git_oid_nfmt - a flexible OID formatter I frequently want to the the first N digits of an OID formatted as a string and I'd like it to be efficient. This function makes that easy and I could rewrite the OID formatters in terms of it.

9c06b250

2013-05-16T13:04:37

merge setup

f672cd2a

2013-05-10T20:15:57

revparse: Make revparse_ext() return git_reference from names as well

e841c533

2013-05-09T16:42:39

revparse: Introduce git_revparse_ext() Expose a way to retrieve, along with the target git_object, the reference pointed at by some revparse expression (`@{<-n>}` or `<branchname>@{upstream}` syntax).

96c01991

2013-05-15T09:24:51

Remove entry dup/free functions and fix comments This removes the functions to duplicate and free copies of a git_index_entry and updates the comments to explain that you should just use the public definition of the struct as needed.

797dfb28

2013-05-13T16:09:33

Add APIs to dup and free git_index_entrys This adds git_index_entry_dup to make a copy of an existing entry and git_index_entry_free to release the memory of the copy. It also updates the documentation for git_index_get_bypath and git_index_get_byindex to make it clear that the returned structure should *not* be modified.

71596200

2013-05-15T15:47:46

Merge pull request #1588 from arrbee/fixes-for-checkout-and-diff Bug fixes for checkout and diff

79ef3be4

2013-05-15T14:50:05

Fix diff crash when last item is untracked dir When the last item in a diff was an untracked directory that only contained ignored items, the loop to scan the contents would run off the end of the iterator and dereference a NULL pointer. This includes a test that reproduces the problem and a fix.

1fed6b07

2013-05-13T21:57:37

Fix trailing whitespaces

f0ab7372

2013-05-15T17:51:57

signature: Lenient when dupping, strict when creating

bc2020d6

2013-05-14T16:39:19

Extend valgrind suppressions on Mac

b4d33e46

2013-05-14T21:54:26

Fix some memory leaks

99d32707

2013-05-11T06:42:25

Fix refdb iteration early termination bug There was a problem found in the Rugged test suite where the refdb_fs_backend__next function could exit too early in some very specific hashing patterns for packed refs. This ports the Rugged test to libgit2 and then fixes the bug.

b6cc559a

2013-05-11T02:42:49

Merge pull request #1385 from carlosmn/refs-iter Introduce a refs iterator

c58cac12

2013-05-04T18:06:14

Introduce a glob-filtering iterator If the backend doesn't provide support for it, the matching is done in refdb on top of a normal iterator.

2b562c3a

2013-05-04T16:32:58

refs: remove the OID/SYMBOLIC filtering Nobody should ever be using anything other than ALL at this level, so remove the option altogether. As part of this, git_reference_foreach_glob is now implemented in the frontend using an iterator. Backends will later regain the ability of doing the glob filtering in the backend.

932af0e9

2013-05-04T15:57:44

Add iterator support to the testdb backend

fb592a96

2013-05-04T15:54:57

Remove outdated test Selecting wether to list loose or packed references is not something we want to support anymore, so remove a test for this.

51fc5e89

2013-05-04T15:16:55

Make sure the ref iterator works in an repo without physical presence

4def7035

2013-03-02T19:31:03

refs: introduce an iterator This allows us to get a list of reference names in a loop instead of callbacks.

4a65aead

2013-05-10T10:49:22

Merge pull request #1571 from arrbee/what-if-ignorecase-lies Improve ignore handling in git_status_file

c3a51711

2013-05-10T10:47:08

Merge pull request #1572 from arrbee/diff-patch-with-rename Fix diff output for renames and copies

24988894

2013-05-10T12:02:17

Fix some memory leaks

e9ba61f3

2013-05-10T09:32:42

Fix diff output for renames and copies If you use rename detection, the renamed and copied files would not show any text diffs because the function that decides if data should be loaded didn't know which sides of the diff to load for those cases. This adds a test that looks at the patch generated for diff entries that are COPIED or RENAMED.

1f9e41ee

2013-05-10T07:50:53

Improve ignore handling in git_status_file The git_status_file API was doing a hack to deal with files that are inside ignored directories. The status scan was not reporting any file in this case, so git_status_file would attempt a final "stat()" call, and return IGNORED if the file actually existed. On case-insensitive filesystems where core.ignorecase is set incorrectly, this magic check can "succeed" and report a file as ignored when it should actually return ENOTFOUND. Now that we have the GIT_STATUS_OPT_RECURSE_IGNORED_DIRS, we can use that flag to make sure that git_status_file() will look into ignored directories and eliminate the hack completely, so we give the correct error.

3d1c9f61

2013-05-09T06:45:06

Fix git_repository_message docs This clarifies the docs for git_repository_message and also adds to the tests to explicitly check NUL termination of data when the output buffer is smaller than the message size. There is a minor behavior change so that a non-NULL output buffer will always be NUL terminated (at length zero) if an error occurs.

ddc5c054

2013-05-09T05:42:37

Merge pull request #1561 from arrbee/fix-windows-diff-eofnl Fix windows diff eofnl error

af795759

2013-05-07T15:09:11

Merge pull request #1552 from carlosmn/config-helpers Config helpers for global/xdg config files

5d831887

2013-05-07T00:10:02

config: convenience function to open global/xdg The rules for which one to open is a bit silly, so let's make it easier for our users.

a4b75dcf

2013-05-06T21:51:25

repo: unconditionally create a global config backend When a repository is initialised, we need to probe to see if there is a global config to load. If this is not the case, the user isn't able to write to the global config without creating the backend and adding it themselves, which is inconvenient and overly complex. Unconditionally create and add a backend for the global config file regardless of whether it exists as a convenience for users. To enable this, we allow creating backends to files that do not exist yet, changing the semantics somewhat, and making some tests invalid.

0f938c6b

2013-05-07T09:59:53

Fix win32 type warnings

505b5d0c

2013-05-07T16:01:22

remote: correctly interpret tagopt '--tags' When tagopt is set to '--tags', we should only take the default tags refspec into account and ignore any configured ones. Bring the code into compliance.

33665410

2013-05-07T08:00:44

Merge pull request #1556 from arrbee/diff-patch-fixes Diff patch bug fixes

c2f602f8

2013-05-07T07:15:39

Fix line numbering for patches with eofnl When a patch contained an eofnl change (i.e. the last line either gained or lost a newline), the oldno and newno line number values for the lines in the last hunk of the patch were not useful. This makes them behave in a more expected manner.

fd96f98e

2013-05-07T04:36:42

More tests for files with no newline at end

e35e2684

2013-05-07T04:32:17

Add GIT_DIFF_LINE_CONTEXT_EOFNL This adds a new line origin constant for the special line that is used when both files end without a newline. In the course of writing the tests for this, I was having problems with modifying a file but not having diff notice because it was the same size and modified less than one second from the start of the test, so I decided to start working on nanosecond timestamp support. This commit doesn't contain the nanosecond support, but it contains the reorganization of maybe_modified and the hooks so that if the nanosecond data were being read by stat() (or rather being copied by git_index_entry__init_from_stat), then the nsec would be taken into account. This new stuff could probably use some more tests, although there is some amount of it here.

3d42e9a3

2013-05-06T20:32:20

git_branch_set_upstream with local branches Currently git_branch_set_upstream when passed a local branch creates invalid configuration, for ex. if we setup branch 'tracking_master' to track local 'master' libgit2 generates the following config ``` [branch "track_master"] remote = . merge = .refs/heads/track_master ``` The merge value is invalid and calling git_branch_upstream on 'tracking_master' results in invalid reference error. It should do: ``` [branch "track_master"] remote = . merge = refs/heads/master ```

03c28d92

2013-05-06T06:45:53

Merge pull request #1526 from arrbee/cleanup-error-return-without-msg Make sure error messages are set for most error returns

d5e5bbd7

2013-05-06T06:45:40

Merge pull request #1524 from jamill/clone_tagopts By default do not set tagopt when cloning

6f748f38

2013-05-04T12:14:40

Do not write tagopt configuration option on clone by default

6e286e8d

2013-05-04T01:04:23

Remove obsolete test for peel type Peeling to an invalid type is now checked via an assert so this test is no longer relevant.

e09d18ee

2013-05-03T18:39:44

allow checkout to proceed when a dir to be removed is in use (win32)

d8041638

2013-05-02T17:22:13

fix some leaks

5e151329

2013-05-02T15:19:49

braces

4e7c1560

2013-05-02T14:58:40

puns are not funny; type punning especially so

7edb9071

2013-05-02T11:07:20

refdb_fs: do not require peeled packed refs to be tags Older versions of git would only write peeled entries for items under refs/tags/. Newer versions will write them for all refs, and we should be prepared to handle that.

d82d66c9

2013-05-02T03:05:21

Extra threading tests We need to hammer the packfile open phase harder in the thread tests, in addition to the cache API.

0cc7d8df

2013-05-01T09:50:40

allow empty dirs to exist when doing checkout

e1807113

2013-05-01T15:31:23

merge: Warning noise

3e199f42

2013-05-01T04:18:46

Set error message for branch functions There were a couple of places where an error was being returned from branch related code but no error message was being set.

75d1c8c6

2013-04-30T17:33:11

move NAME and REUC extensions to sys/

0462fba5

2013-04-30T14:56:41

renames!

bec65a5e

2013-04-01T22:16:21

merge!

a66c4bc8

2013-04-29T02:57:01

More tests for diff untracked directories This includes more tests for various scenarios when diff includes an untracked directory in the workdir with contents either ignored or not.

e26b14c0

2013-04-26T15:35:47

Update diff handling of untracked directories When diff encounters an untracked directory, there was a shortcut that it took which is not compatible with core git. This makes the default behavior no longer take that shortcut and instead look inside the untracked directory to see if there are any untracked files within it. If there are not, then the directory is treated as an ignore directory instead of an untracked directory. This has implications for the git_status APIs.

cd2ed9f0

2013-04-30T04:02:52

Merge pull request #1518 from arrbee/export-oid-comparison Remove most inlines from the public API

d76fb20e

2013-04-30T03:29:48

Merge pull request #1520 from carlosmn/nth-refspec Add refspec list accessors

0a1755c0

2013-04-30T03:15:45

Catch issue in config set with no config file This prevents a segfault when setting a value in the config of a repository that doesn't have a config file.

1ffd0806

2013-04-30T11:18:16

remote: add resfpec list accessors Bring back a way of acessing the git_refspec* from a remote. Closes #1514

aa8f0101

2013-04-29T08:59:46

Add git_oid_strcmp and use it for git_oid_streq Add a new git_oid_strcmp that compares a string OID with a hex oid for sort order, and then reimplement git_oid_streq using it. This actually should speed up git_oid_streq because it only reads as far into the string as it needs to, whereas previously it would convert the whole string into an OID and then use git_oid_cmp.

8564a022

2013-04-29T08:51:24

Fix fragile git_oid_ncmp git_oid_ncmp was making some assumptions about the length of the data - this shifts the check to the top of the loop so it will work more robustly, limits the max, and adds some tests to verify the functionality.

d8488457

2013-04-28T16:26:55

remote: dwim the refspecs according to the remote's advertised refs As git allows you to store shorthand refspecs in the configuration, we need to do this ourselves.

528a4e24

2013-04-28T14:16:45

Parse shorthand refspecs as valid Relax the ONELEVEL ref naming rules so the refspec parsing code can ask for 'master' to be considered valid.

b1ff7004

2013-04-22T16:25:57

Improve diff config options handling This makes diff use the cvar cache for config options where possible, and also adds support for a number of other config options to diff including "diff.context", "diff.ignoreSubmodules", "diff.noprefix", "diff.mnemonicprefix", and "core.abbrev". To make this natural, this involved a rearrangement of the code that allocates the diff object vs. the code that initializes it based on the combination of options passed in by the user and read from the config. This commit includes tests for most of these new options as well.

bd0a07f4

2013-04-23T12:28:59

Clone: replace fetch spec with custom value

dfdf709e

2013-04-23T21:29:07

get last refspec in clone test

05b17964

2013-04-21T19:26:35

Make refcounting atomic

d8771592

2013-04-22T17:04:52

cache: Max cache size, and evict when the cache fills up

cf9709b6

2013-04-22T16:53:46

tests: Do not warn for unused variable

865e2dd4

2013-04-17T23:58:37

tests: Cleanup commit parse testing code

38eef611

2013-04-16T14:19:27

Make indexer use shared packfile open code The indexer was creating a packfile object separately from the code in pack.c which was a problem since I put a call to git_mutex_init into just pack.c. This commit updates the pack function for creating a new pack object (i.e. git_packfile_check()) so that it can be used in both places and then makes indexer.c use the shared initialization routine. There are also a few minor formatting and warning message fixes.

3f27127d

2013-04-16T11:51:02

Simplify object table parse functions This unifies the object parse functions into one signature that takes an odb_object.

78606263

2013-04-15T00:05:44

Add callback to git_objects_table This adds create and free callback to the git_objects_table so that more of the creation and destruction of objects can be table driven instead of using switch statements. This also makes the semantics of certain object creation functions consistent so that we can make better use of function pointers. This also fixes a theoretical error case where an object allocation fails and we end up storing NULL into the cache.

917f60c5

2013-04-12T13:04:08

Add tests for oidmap and new cache with threading This adds some basic tests for the oidmap just to make sure that collisions, etc. are dealt with correctly. This also adds some tests for the new caching that check if items are inserted (or not inserted) properly into the cache, and that the cache can hold up in a multithreaded environment without error.

8842c75f

2013-04-03T22:30:07

What has science done.

5df18424

2013-04-01T19:38:23

lol this worked first try wtf

a472f887

2013-04-22T07:44:32

Merge pull request #1493 from carlosmn/remotes Revamp the refspec handling

21ca0451

2013-04-21T12:52:17

Move git_reference__alloc to include/git2/sys Create a new include/git2/sys/refs.h and move the reference alloc functions there. Also fix some documentation issues and some minor code cleanups.

4dcd8780

2013-04-19T17:17:44

Move refdb_backend to include/git2/sys This moves most of the refdb stuff over to the include/git2/sys directory, with some minor shifts in function organization. While I was making the necessary updates, I also removed the trailing whitespace in a few files that I modified just because I was there and it was bugging me.

1384b688

2013-04-19T13:00:12

Move some low-level repo fns to include/git2/sys

83cc70d9

2013-04-19T12:48:33

Move odb_backend implementors stuff into git2/sys This moves some of the odb_backend stuff that is related to the internals of an odb_backend implementation into include/git2/sys. Some of the stuff related to streaming I left in include/git2 because it seemed like it would be reasonably needed by a normal user who wanted to stream objects into and out of the ODB. Also, I added APIs for traversing the list of backends so that some of the tests would not need to access ODB internals.

83041c71

2013-04-19T11:52:04

Move git_config_backend to include/git2/sys Moving backend implementor objects into include/git2/sys so the APIs can be isolated from the ones that normal libgit2 users would be likely to use.

1be680c4

2013-04-20T19:13:47

refspec: unify the string and parsed data It used to be separate as an attempt to make the querying easier, but it didn't work out that way, so put all the data together. Add git_refspec_string() as well to get the original string, which is now stored alongside the independent parts.

bc6374ea

2013-04-20T18:49:11

remote: allow querying for refspecs Introduce git_remote_{fetch,push}_refspecs() to get a list of refspecs from the remote and rename the refspec-adding functions to a less silly name. Use this instead of the vector index hacks in the tests.

4330ab26

2013-04-20T04:43:28

remote: handle multiple refspecs A remote can have a multitude of refspecs. Up to now our git_remote's have supported a single one for each fetch and push out of simplicity to get something working. Let the remotes and internal code know about multiple remotes and get the tests passing with them. Instead of setting a refspec, the external users can clear all and add refspecs. This should be enough for most uses, though we're still missing a querying function.

e5a27f03

2013-04-20T15:25:39

config: allow setting multivars when none exist yet Adding a multivar when there are no variables with that name set should set the variable instead of failing.

8f24e65f

2013-04-20T16:20:21

Plug a couple of leaks

4e4eab52

2013-04-19T18:19:53

alloc doesn't take a refdb; git_refdb_free nicely in the tests

thodg/libgit2/tests-clar

tests-clar

Log