thodg/libgit2

Diff

  • Show log

    Commit

  • Hash : d77378eb
    Author : Patrick Steinhardt
    Date : 2019-09-13T08:54:26 

    regexp: implement new regular expression API

We currently support a set of different regular expression backends with
PCRE, PCRE2, regcomp(3P) and regcomp_l(3). The current implementation of
this is done via a simple POSIX wrapper that either directly uses
supplied functions or that is a very small wrapper.

To support PCRE and PCRE2, we use their provided <pcreposix.h> and
<pcre2posix.h> wrappers. These wrappers are implemented in such a way
that the accompanying libraries pcre-posix and pcre2-posix provide the
same symbols as the libc ones, namely regcomp(3P) et al. This works out
on some systems just fine, most importantly on glibc-based ones, where
the regular expression functions are implemented as weak aliases and
thus get overridden by linking in the pcre{,2}-posix library. On other
systems we depend on the linking order of libc and pcre library, and as
libc always comes first we will end up with the functions of the libc
implementation. As a result, we may use the structures `regex_t` and
`regmatch_t` declared by <pcre{,2}posix.h>, but use functions defined by
the libc, leading to segfaults.

The issue is not easily solvable. Somed distributions like Debian have
resolved this by patching PCRE and PCRE2 to carry custom prefixes to all
the POSIX function wrappers. But this is not supported by upstream and
thus inherently unportable between distributions. We could instead try
to modify linking order, but this starts becoming fragile and will not
work e.g. when libgit2 is loaded via dlopen(3P) or similar ways. In the
end, this means that we simply cannot use the POSIX wrappers provided by
the PCRE libraries at all.

Thus, this commit introduces a new regular expression API. The new API
is on a tad higher level than the previous POSIX abstraction layer, as
it tries to abstract away any non-portable flags like e.g. REG_EXTENDED,
which has no equivalents in all of our supported backends. As there are
no users of POSIX regular expressions that do _not_ reguest REG_EXTENDED
this is fine to be abstracted away, though. Due to the API being
higher-level than before, it should generally be a tad easier to use
than the previous one.

Note: ideally, the new API would've been called `git_regex_foobar` with
a file "regex.h" and "regex.c". Unfortunately, this is currently
impossible to implement due to naming clashes between the then-existing
"regex.h" and <regex.h> provided by the libc. As we add the source
directory of libgit2 to the header search path, an include of <regex.h>
would always find our own "regex.h". Thus, we have to take the bitter
pill of adding one more character to all the functions to disambiguate
the includes.

To improve guarantees around cross-backend compatibility, this commit
also brings along an improved regular expression test suite
core::regexp.

  • README.md

  • libgit2 - the Git linkable library

    Build Status
    master branch CI builds Azure Pipelines Build Status
    v0.28 branch CI builds Azure Pipelines Build Status
    v0.27 branch CI builds Azure Pipelines Build Status
    v0.26 branch CI builds Azure Pipelines Build Status
    Nightly builds Azure Pipelines Build Status Coverity Build Status Coverity Scan Build Status

    libgit2 is a portable, pure C implementation of the Git core methods provided as a linkable library with a solid API, allowing to build Git functionality into your application. Language bindings like Rugged (Ruby), LibGit2Sharp (.NET), pygit2 (Python) and NodeGit (Node) allow you to build Git tooling in your favorite language.

    libgit2 is used to power Git GUI clients like GitKraken and gmaster and on Git hosting providers like GitHub, GitLab and Azure DevOps. We perform the merge every time you click “merge pull request”.

    libgit2 is licensed under a very permissive license (GPLv2 with a special Linking Exception). This basically means that you can link it (unmodified) with any kind of software without having to release its source code. Additionally, the example code has been released to the public domain (see the separate license for more information).

    Table of Contents

    Quick Start

    Prerequisites for building libgit2:

    1. CMake, and is recommended to be installed into your PATH.
    2. Python is used by our test framework, and should be installed into your PATH.
    3. C compiler: libgit2 is C90 and should compile on most compilers.
      • Windows: Visual Studio is recommended
      • Mac: Xcode is recommended
      • Unix: gcc or clang is recommended.

    Build

    1. Create a build directory beneath the libgit2 source directory, and change into it: mkdir build && cd build
    2. Create the cmake build environment: cmake ..
    3. Build libgit2: cmake --build .

    Trouble with these steps? Read our troubleshooting guide. More detailed build guidance is available below.

    Getting Help

    Join us on Slack

    Visit slack.libgit2.org to sign up, then join us in #libgit2. If you prefer IRC, you can also point your client to our slack channel once you’ve registered.

    Getting Help

    If you have questions about the library, please be sure to check out the API documentation. If you still have questions, reach out to us on Slack or post a question on StackOverflow (with the libgit2 tag).

    Reporting Bugs

    Please open a GitHub Issue and include as much information as possible. If possible, provide sample code that illustrates the problem you’re seeing. If you’re seeing a bug only on a specific repository, please provide a link to it if possible.

    We ask that you not open a GitHub Issue for help, only for bug reports.

    Reporting Security Issues

    Please have a look at SECURITY.md.

    What It Can Do

    libgit2 provides you with the ability to manage Git repositories in the programming language of your choice. It’s used in production to power many applications including GitHub.com, Plastic SCM and Azure DevOps.

    It does not aim to replace the git tool or its user-facing commands. Some APIs resemble the plumbing commands as those align closely with the concepts of the Git system, but most commands a user would type are out of scope for this library to implement directly.

    The library provides:

    • SHA conversions, formatting and shortening
    • abstracted ODB backend system
    • commit, tag, tree and blob parsing, editing, and write-back
    • tree traversal
    • revision walking
    • index file (staging area) manipulation
    • reference management (including packed references)
    • config file management
    • high level repository management
    • thread safety and reentrancy
    • descriptive and detailed error messages
    • …and more (over 175 different API calls)

    As libgit2 is purely a consumer of the Git system, we have to adjust to changes made upstream. This has two major consequences:

    • Some changes may require us to change provided interfaces. While we try to implement functions in a generic way so that no future changes are required, we cannot promise a completely stable API.
    • As we have to keep up with changes in behavior made upstream, we may lag behind in some areas. We usually to document these incompatibilities in our issue tracker with the label “git change”.

    Optional dependencies

    While the library provides git functionality without the need for dependencies, it can make use of a few libraries to add to it:

    • pthreads (non-Windows) to enable threadsafe access as well as multi-threaded pack generation
    • OpenSSL (non-Windows) to talk over HTTPS and provide the SHA-1 functions
    • LibSSH2 to enable the SSH transport
    • iconv (OSX) to handle the HFS+ path encoding peculiarities

    Initialization

    The library needs to keep track of some global state. Call

    git_libgit2_init();

    before calling any other libgit2 functions. You can call this function many times. A matching number of calls to

    git_libgit2_shutdown();

    will free the resources. Note that if you have worker threads, you should call git_libgit2_shutdown after those threads have exited. If you require assistance coordinating this, simply have the worker threads call git_libgit2_init at startup and git_libgit2_shutdown at shutdown.

    Threading

    See threading for information

    Conventions

    See conventions for an overview of the external and internal API/coding conventions we use.

    Building libgit2 - Using CMake

    Building

    libgit2 builds cleanly on most platforms without any external dependencies. Under Unix-like systems, like Linux, *BSD and Mac OS X, libgit2 expects pthreads to be available; they should be installed by default on all systems. Under Windows, libgit2 uses the native Windows API for threading.

    The libgit2 library is built using CMake (version 2.8 or newer) on all platforms.

    On most systems you can build the library using the following commands

    $ mkdir build && cd build
$ cmake ..
$ cmake --build .

    Alternatively you can point the CMake GUI tool to the CMakeLists.txt file and generate platform specific build project or IDE workspace.

    Running Tests

    Once built, you can run the tests from the build directory with the command

    $ ctest -V

    Alternatively you can run the test suite directly using,

    $ ./libgit2_clar

    Invoking the test suite directly is useful because it allows you to execute individual tests, or groups of tests using the -s flag. For example, to run the index tests:

    $ ./libgit2_clar -sindex

    To run a single test named index::racy::diff, which corresponds to the test function test_index_racy__diff:

    $ ./libgit2_clar -sindex::racy::diff

    The test suite will print a . for every passing test, and an F for any failing test. An S indicates that a test was skipped because it is not applicable to your platform or is particularly expensive.

    Note: There should be no failing tests when you build an unmodified source tree from a release, or from the master branch. Please contact us or open an issue if you see test failures.

    Installation

    To install the library you can specify the install prefix by setting:

    $ cmake .. -DCMAKE_INSTALL_PREFIX=/install/prefix
$ cmake --build . --target install

    Advanced Usage

    For more advanced use or questions about CMake please read https://cmake.org/Wiki/CMake_FAQ.

    The following CMake variables are declared:

    • BIN_INSTALL_DIR: Where to install binaries to.
    • LIB_INSTALL_DIR: Where to install libraries to.
    • INCLUDE_INSTALL_DIR: Where to install headers to.
    • BUILD_SHARED_LIBS: Build libgit2 as a Shared Library (defaults to ON)
    • BUILD_CLAR: Build Clar-based test suite (defaults to ON)
    • THREADSAFE: Build libgit2 with threading support (defaults to ON)

    To list all build options and their current value, you can do the following:

    # Create and set up a build directory
$ mkdir build
$ cmake ..
# List all build options and their values
$ cmake -L

    Compiler and linker options

    CMake lets you specify a few variables to control the behavior of the compiler and linker. These flags are rarely used but can be useful for 64-bit to 32-bit cross-compilation.

    • CMAKE_C_FLAGS: Set your own compiler flags
    • CMAKE_FIND_ROOT_PATH: Override the search path for libraries
    • ZLIB_LIBRARY, OPENSSL_SSL_LIBRARY AND OPENSSL_CRYPTO_LIBRARY: Tell CMake where to find those specific libraries

    MacOS X

    If you want to build a universal binary for Mac OS X, CMake sets it all up for you if you use -DCMAKE_OSX_ARCHITECTURES="i386;x86_64" when configuring.

    Android

    Extract toolchain from NDK using, make-standalone-toolchain.sh script. Optionally, crosscompile and install OpenSSL inside of it. Then create CMake toolchain file that configures paths to your crosscompiler (substitute {PATH} with full path to the toolchain):

    SET(CMAKE_SYSTEM_NAME Linux)
SET(CMAKE_SYSTEM_VERSION Android)

SET(CMAKE_C_COMPILER   {PATH}/bin/arm-linux-androideabi-gcc)
SET(CMAKE_CXX_COMPILER {PATH}/bin/arm-linux-androideabi-g++)
SET(CMAKE_FIND_ROOT_PATH {PATH}/sysroot/)

SET(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER)
SET(CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY)
SET(CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY)

    Add -DCMAKE_TOOLCHAIN_FILE={pathToToolchainFile} to cmake command when configuring.

    Language Bindings

    Here are the bindings to libgit2 that are currently available:

    If you start another language binding to libgit2, please let us know so we can add it to the list.

    How Can I Contribute?

    We welcome new contributors! We have a number of issues marked as “up for grabs” and “easy fix” that are good places to jump in and get started. There’s much more detailed information in our list of outstanding projects.

    Please be sure to check the contribution guidelines to understand our workflow, and the libgit2 coding conventions.

    License

    libgit2 is under GPL2 with linking exception. This means you can link to and use the library from any program, proprietary or open source; paid or gratis. However, if you modify libgit2 itself, you must distribute the source to your modified version of libgit2.

    See the COPYING file for the full license text.

kmx.io     mail     discord kmxgit v0.4.0