|
24a74956
|
2017-09-09T08:03:23
|
|
Updated config.guess and config.sub, added config.sub.patch for NaCl and Emscripten build support
|
|
|
5c8bde4f
|
2017-09-09T07:45:31
|
|
Updated documentation to note that libvulkan-dev is no longer needed
|
|
|
f3337780
|
2017-09-09T07:42:29
|
|
Fixed bug 3807 - Remove restriction from DECLSPEC macro for OS/2
Ozkan Sezer
The following patch removes the unnecessary / wrong
Watcom restriction from the DECLSPEC macro for OS/2.
|
|
|
8004be64
|
2017-09-09T07:35:55
|
|
We don't need libvulkan-dev to build Vulkan support
|
|
|
47cb8815
|
2017-09-09T07:30:25
|
|
Updated Debian changelog for 2.0.6 release
|
|
|
222d25ad
|
2017-09-08T22:21:01
|
|
Fixed bug 3805 - Why is there no --enable-video-rpi option in configure?
Andreas Falkenhahn
When compiling SDL for the Raspberry Pi, I have to use the --host parameter to enable compilation of the native Raspberry Pi video driver, like so:
--host=arm-raspberry-linux-gnueabihf
It took me a while to figure out that this was necessary in order to have the native Raspberry Pi video driver compiled in. I think it would be better if there was an option like --enable-video-rpi that could be passed to configure and that would also show up when saying configure --help. Currently, it?s rather difficult to figure out that you have to use the --host parameter with arm-raspberry-linux-gnueabihf in order to get Raspberry Pi video support. It?s also somewhat inconsistent because most other video drivers can in fact be enabled/disabled through specific configure parameters but there is no such parameter for the native Raspberry Pi video driver.
|
|
|
e8059221
|
2017-09-08T18:26:25
|
|
Fixed bug 3806 - Fixes for MSVC compiler warnings
Simon Hug
These are the remaining compiler warnings I see in the current tip cb049cae7c3c.
- SDL_test_log.c defines _CRT_SECURE_NO_WARNINGS without checking if it was already set.
- SDL_windowskeyboard.c converts integers to pointers without going over the (U)INT_PTR types. That bothers MSVC.
|
|
|
cedbb311
|
2017-09-08T15:08:50
|
|
Fixed building with the first version of Visual Studio 2017, which doesn't have __has_include() (Thanks Simon!)
|
|
|
1b2492ed
|
2017-09-08T15:08:03
|
|
Fixed 64-bit build warning
|
|
|
0ddac338
|
2017-09-08T07:15:47
|
|
keep joystick thread from waking unnecessarily, and from possibly blocking for 300ms at shutdown if a joystick was just plugged in
CR: SamL
|
|
|
4657d9f3
|
2017-09-08T04:53:31
|
|
We don't need to pass the renderer into SDLTest_CleanupTextDrawing()
|
|
|
65c55fdd
|
2017-09-08T04:38:46
|
|
Fixed build
|
|
|
b0b3da77
|
2017-09-08T04:14:05
|
|
Added a function to clean up test text drawing
|
|
ca15c7d6
|
2017-09-07T10:56:08
|
|
wave: SDL_LoadWAV now supports 24-bit audio.
|
|
|
fb283932
|
2017-09-06T19:35:36
|
|
vulkan: use "unsigned int" instead of "unsigned"
|
|
|
0c892abc
|
2017-09-06T19:34:23
|
|
raspberrypi: The latest Raspbian moved its EGL and GLES2 libs elsewhere.
Now we try the new (hardware-specific) pathnames first, and if those fail to
load, we'll try the more generic names that earlier versions of Raspbian used.
Fixes Bugzilla #3800.
|
|
|
28bf56c1
|
2017-09-06T10:31:05
|
|
Fixed bug 3801 - HAVE_LIBSAMPLERATE_H depending on HAVE_LIBC in current SDL_config.h.in
Ozkan Sezer
HAVE_LIBSAMPLERATE_H is depending on HAVE_LIBC in current config.h.in:
it shouldn't be. HAVE_LIBUDEV_H, HAVE_DBUS_DBUS_H, HAVE_IBUS_IBUS_H,
HAVE_FCITX_FRONTEND_H, and HAVE_ALTIVEC_H have the same situation too.
I suggest something like the following, which moves them out of the
HAVE_LIBC confinement and also moves the windows dx header stuff along
side them. (Not ideal, but a bit cleaner I think.)
|
|
|
fa0eeff7
|
2017-09-06T07:29:34
|
|
sdl:
Cleans up AdjustWindowEx calls
|
|
|
20c5bc91
|
2017-09-06T05:23:26
|
|
You can have a borderless resizable window
|
|
|
4ca5d862
|
2017-09-06T04:32:30
|
|
Fixed bug 3780 - GCC 7 implicit fallthrough warnings
Martin Gerhardy 2017-08-28 06:58:01 UTC
SDL_blit.h, SDL_fillrect.c and SDL_stdinc.h produces a lot of the (new) gcc-7 implicit fallthrough warnings.
|
|
|
d51dc737
|
2017-09-06T01:14:23
|
|
Fixed bug 3797 - configure check for float.h
Ozkan Sezer
Cmake checks for float.h, but configure does not: the attached patch
adds float.h to checked headers in configury, and it adds the missing
HAVE_FLOAT_H macro to SDL_config.h.cmake and SDL_config.h.in.
In SDL_config_macosx.h and SDL_config_windows.h, defined HAVE_FLOAT_H
as 1, where I know that it's true.
|
|
|
c8e3e0c4
|
2017-09-06T01:10:10
|
|
Fixed bug 3799 - SDL_CreateWindow fails with SDL_WINDOW_VULKAN (libvulkan.so.1 not found)
Manuel Sabogal
Android NDK defines Vulkan as libvulkan.so, not libvulkan.so.1. This is causing the program to not being able to create a window using SDL_WINDOW_VULKAN.
To fix this issue just change the line http://hg.libsdl.org/SDL/file/bbaec41e93b5/src/video/android/SDL_androidvulkan.c#l53 from "libvulkan.so.1" to "libvulkan.so"
|
|
|
c9e73c3e
|
2017-09-05T16:15:54
|
|
x11: make sure SDL_GetGlobalMouseState notices mouse warping through SDL APIs.
|
|
|
0782f9be
|
2017-09-05T08:24:38
|
|
Fixed bug 3273 - Fix for slow video subsystem initialization when using XRandR.
Mart?n Golini
I'm having a very slow initialization of the video subsystem that locks the window creation for about 500 ms ( tested in at least 4 different systems ). What i found is that X11_InitModes_XRandR is using XRRGetScreenResources, that explicitly ask to poll the hardware for changes. This is not really necessary since if the data is already available you can use XRRGetScreenResourcesCurrent.
I attached a tentative patch that fix this issue. With the patch there's no lock when the subsystem is initialized and the window creation is instant in my applications. The patch only uses XRRGetScreenResourcesCurrent in X11_InitModes_XRandR but it could be potentially used in X11_GetDisplayModes and X11_SetDisplayMode.
|
|
|
3261ca75
|
2017-09-04T23:10:12
|
|
Fixed typos in 2.0.6 patch notes
|
|
|
d2eda267
|
2017-09-04T22:51:28
|
|
Added SDL_vulkan.h to the Mac OS X framework headers
|
|
|
c1fd0fbb
|
2017-09-04T22:14:57
|
|
Fixed compiler warning with mingw-w64
|
|
|
657ad72a
|
2017-09-04T21:16:28
|
|
Added some more big 2.0.6 changes
|
|
|
d75fea89
|
2017-09-04T20:48:01
|
|
Updated WhatsNew.txt for 2.0.6
|
|
|
67f9348b
|
2017-09-04T11:46:14
|
|
Fixed bug 3790 - Memory leak with surfaces blitting on each other
bastien.bouclet
When creating two surfaces and blitting them onto the other, SDL's internal reference counting fails, and one of the surfaces is not freed when calling SDL_FreeSurface.
Example code :
SDL_Surface *s1 = SDL_CreateRGBSurfaceWithFormat(0, 640, 480, 32, SDL_PIXELFORMAT_ARGB8888);
SDL_Surface *s2 = SDL_CreateRGBSurfaceWithFormat(0, 640, 480, 32, SDL_PIXELFORMAT_ARGB8888);
SDL_BlitSurface(s1, NULL, s2, NULL);
SDL_BlitSurface(s2, NULL, s1, NULL);
SDL_FreeSurface(s2);
SDL_FreeSurface(s1);
With this example, s1 is not freed after calling SDL_FreeSurface, its refcount attribute is still positive.
|
|
532446a6
|
2017-09-03T17:33:49
|
|
macOS: bug-fix for #3793, "fullscreen toggle does not maintain SDL_Renderer's logical size"
This also seems to fix the follow-up issue in bug #3719, whereby the initial fix caused the SDL window to move, after transitioning from fullscreen to windowed-mode
|
|
|
2ea09903
|
2017-09-03T16:36:22
|
|
WinRT: listed VS 2017 optional-component requirements
|
|
|
a12989f9
|
2017-09-03T13:20:33
|
|
vulkan: Changed SDL_WINDOW_VULKAN value to match Tizen's fork.
|
|
|
167398b3
|
2017-09-02T19:35:32
|
|
video: Let video targets optionally decide their default OpenGL configs.
This is necessary because the Raspberry Pi is a strange beast, that believes
it has OpenGL support (through glX?) but generally has GLES2 support.
So when using the raspberry video target, we need to force this to default
to a GLES2 context, or by default SDL_CreateWindow() will fail, deep down
when it tries to load the proper GL library.
Fixes testsprite2 (and basically everything else that wasn't testgles2) when
run on a Raspberry Pi without a X server.
Please note that other targets might also need this filled in, the Raspberry
Pi is just the most prominent and readily-available System-On-A-Chip style
thing on my desk. :)
|
|
|
3267398d
|
2017-09-02T16:41:14
|
|
sndio: Patched to compile if SIO_DEVANY isn't defined.
(It isn't in whatever Raspbian is currently shipping.)
|
|
|
c26946e9
|
2017-09-01T12:54:38
|
|
Fixed bug 3792 - [KMS/DRM] Wrong GBM format
Romain Tisserand
Using KMS/DRM driver from WIP SDL2.0.6 on Linux/ARM SoC RockChip RK3328 (ARM Mali 450 MP2 GPU).
The current code is using GBM_BO_FORMAT_XRGB8888 as GBM buffer format specifier.
The Mali driver (it has been confirmed some other vendor implementations too) expects GBM_FORMAT_XRGB8888.
The Mesa implementation is actually handling both values as the same, but it's not implemented like this into every gbm.h vendor header.
https://github.com/ideak/mesa/blob/master/src/gbm/backends/dri/gbm_dri.c
So with stock SDL2 on my card (Mali vendor implementation), it does not work, eglCreateWindowSurface fails, and gbm_is_format_supported fails too (with the BO variant).
It runs fine with GBM_FORMAT_XRGB8888.
Here is a link of the gbm.h from Mali user-space driver :
https://github.com/rockchip-linux/libmali/blob/rockchip/include/gbm.h
|
|
|
74043994
|
2017-09-01T14:08:09
|
|
x11: Correctly restore previous GL context after sacrificial context is done.
|
|
|
a3dda100
|
2017-09-01T14:00:11
|
|
x11: don't try to make a NULL GL context current when we already did that.
|
|
|
4649ac46
|
2017-09-01T13:57:40
|
|
x11: Clean up sacrificial GL context code.
Check for failures, restore any previously-current context.
|
|
|
507659c6
|
2017-09-01T13:27:53
|
|
x11: Make a sacrificial glX context to check for extensions during init.
This is necessary because we need to see if GLES compat extensions exist.
All of this code (including ShouldUseTextureFramebuffer()) should be
revisited after 2.0.6 ships; ideally we don't make throwaway contexts if
we can avoid it...but maybe we can't. I hear Vulkan is pretty cool.
Fixes Bugzilla #3725.
|
|
20207abf
|
2017-08-31T22:07:28
|
|
macOS: Update controller mapping of Steelseries Stratus XL to account for reversed thumbstick y-axis values (bug #3483).
|
|
|
d7ae3131
|
2017-08-31T21:34:29
|
|
macOS: Fix menubar items being enabled when they shouldn't be.
|
|
|
b959be25
|
2017-08-31T21:26:13
|
|
Code style cleanup in the Cocoa and UIKit vulkan files.
|
|
|
cfd7a7fa
|
2017-08-31T21:13:32
|
|
macOS: Prevent unwanted native fullscreen (Spaces) toggles when the window is in fullscreen or isn't resizable. Fixes bug #3691.
|
|
|
ff76f8e5
|
2017-08-31T15:17:59
|
|
Fixed bug 3791 - SDL_bits.h: __builtin_clz is supported in gcc >= 3.4
Ozkan Sezer
__builtin_clz is supported in gcc >= 3.4. The following patchlet adjusts
SDL_bits.h for it.
|
|
|
6c38c900
|
2017-08-31T15:12:08
|
|
Update Android SDK required to API level 16
Sylvain
Some API 16 methods are used (InputDevice: getDescriptor(), getVibrator()), so we need to compile at least with SDK API 16. Hence default.properties and project.properties have been modified to use android-16.
There are also some modification to SDLActivity.java not to use getVibrator() if we run under API 16. And not to check to presence of hasVibrator() if we are under API 11.
-some hard-coded constant can be expandend.
- rename a local variable (hasVibrator to hasVibratorService)
|
|
|
b54bcb34
|
2017-08-30T23:30:24
|
|
Fixed bug 3483 - Steelseries Nimbus MFi controller reversed Y-axis analog stick
benjamin.feng
Probable underlying cause: https://bugzilla.libsdl.org/show_bug.cgi?id=3124#c5
"If you download and build the HID Calibrator sample you can see that these are totally legitimate HID devices (except for inverting the Y-axis of joysticks, which is contrary to the HID specification but does make them more compatible with games compiled expecting XBOX controllers)."
|
|
|
8e160a34
|
2017-08-30T23:02:39
|
|
Convert tabs to spaces in game controller database entries
|
|
|
347fe704
|
2017-08-30T14:25:01
|
|
Fixed bug 3789 - Android : small clean up
Sylvain
Since https://hg.libsdl.org/SDL/rev/6546daa45a02
SDL_android_main.c is empty and then produce a warning
nativeInit does not exist and dont need to be mark undefined
|
|
|
b5f31c39
|
2017-08-30T09:44:38
|
|
Moved haptic source files into the proper folder
|
|
|
e53c5c5c
|
2017-08-30T00:40:06
|
|
Fix QNX build - prioritize system EGL headers over the Khronos ones
|
|
|
9ca62923
|
2017-08-29T23:14:39
|
|
Added some missing render capability flags
|
|
|
c3d428d4
|
2017-08-29T23:12:26
|
|
Fixed line breaks in verbose test logging output
|
|
|
94e0f3e9
|
2017-08-29T22:52:17
|
|
Added some debug messaging for previously unhandled events
|
|
|
2d10a3f2
|
2017-08-29T22:24:59
|
|
The dummy video driver check is now covered by explicitly checking for cocoa above.
|
|
|
92bf6085
|
2017-08-29T22:04:43
|
|
Fixed bug 3616 - SDL_GL_CreateContext fails with SDL_GL_CONTEXT_DEBUG_FLAG and ANGLE/GLES 2.0
Colin Barrett
Using the pre-built x86 devel libs from here:
https://www.libsdl.org/release/SDL2-devel-2.0.5-VC.zip
If I have:
SDL_GL_SetAttribute(SDL_GL_CONTEXT_PROFILE_MASK, SDL_GL_CONTEXT_PROFILE_ES);
SDL_GL_SetAttribute(SDL_GL_CONTEXT_MAJOR_VERSION, 2);
SDL_GL_SetAttribute(SDL_GL_CONTEXT_MINOR_VERSION, 0);
SDL_GL_SetAttribute(SDL_GL_CONTEXT_FLAGS, SDL_GL_CONTEXT_DEBUG_FLAG);
and I'm using ANGLE/(a GL driver that doesn't provide an ES2 context) such that SDL_EGL_CreateContext is called by SDL_GL_CreateContext, I get the error "Could not create EGL context (context attributes are not supported)" and no context is created.
Looking at the code in SDL_EGL_CreateContext - if gl_config.flags is non-zero, it looks like the code in the section guarded with "#ifdef EGL_KHR_create_context" should be executed - but it apparently isn't.
Is it possible this section hasn't been compiled into the pre-built libraries? If I build SDL2.dll myself using the Visual C++ solution (VS2015 Community Update 3) then the call succeeds as I expect
|
|
|
8fc1fb08
|
2017-08-29T21:42:22
|
|
Fixed bug 3719 - Cocoa - Incorrect window size when leaving fullscreen
bastien.bouclet
When exiting a "fullscreen space" on OS X, windows don't go to their defined "windowed mode size", but go back to their previous size.
Steps to reproduce:
1. Create a windowed mode SDL window
2. Toggle it to fullscreen with the SDL_WINDOW_FULLSCREEN_DESKTOP flag
3. While in fullscreen, change the windowed mode size using SDL_SetWindowSize
4. Toggle the window back to windowed mode
Expected result:
- The window has the size specified during step 3.
Actual result:
- The window has the size specified when creating the window in step 1.
Attached is a minimal reproduction test case.
The attached test case works as expected on X11 and Windows.
|
|
|
846a9ab9
|
2017-08-29T18:25:55
|
|
test: forgot to change a variable.
Fixes Bugzilla #3787.
|
|
|
4fc01638
|
2017-08-29T18:16:38
|
|
test: Fix for negative int that was now a size_t (thanks, Ozkan!).
Fixes Bugzilla #3787.
|
|
|
21e32bac
|
2017-08-29T16:30:49
|
|
egl: Cast to size_t, in case platform's NativeDisplayType isn't a pointer.
(fixes compiler warnings on QNX.)
|
|
|
eb3c66d3
|
2017-08-29T16:05:03
|
|
A few more compiler warnings fixed.
|
|
|
ae667da6
|
2017-08-29T15:52:49
|
|
Fixed a bunch of compiler warnings.
|
|
|
629f8aba
|
2017-08-29T09:02:04
|
|
Updated documentation, you don't need to initialize the audio subsystem to do in-place format conversion. (Thanks Simon Hug!)
|
|
|
abf8fc4c
|
2017-08-29T08:27:23
|
|
Fixed check for Mac OS X 10.11+ SDK (thanks Edward Rudd!)
|
|
|
2d655cd8
|
2017-08-29T02:32:53
|
|
MAC_OS_X_VERSION_MAX_REQUIRED isn't actually set in recent Xcode versions
|
|
|
737ed973
|
2017-08-29T01:04:48
|
|
Removed Metal and QuartzCore frameworks which aren't needed for Vulkan support
|
|
|
c684eb2c
|
2017-08-28T23:04:47
|
|
Add a way to set the context when other activities are active so many SDL API functions still work.
|
|
|
130138fa
|
2017-08-28T22:44:48
|
|
Fixed bug 3785 - fix windows build after revision 11382
Ozkan Sezer
fix windows build after revision 11382: commit 2026e42e377a renamed
_SDL_msctf_h to SDL_msctf_h_ . SDL_windowskeyboard.c relies on that
macro, so update it accordingly.
|
|
|
c0530bcd
|
2017-08-28T22:42:41
|
|
We removed QuartzCore link dependency in commit 5be6badaf7e1
|
|
|
8ac85744
|
2017-08-28T22:36:45
|
|
Fixed Vulkan configure check for Android and added one for Mac OS X
|
|
|
90b38a5d
|
2017-08-28T22:13:45
|
|
Fixed bug 3786 - building against a Mac OS X SDK < 10.11 fails since the vulkan merge
Ozkan Sezer
Since the Vulkan merge, building against a Mac OS X SDM older than
10.11 fails in SDL_cocoametalview.m because Metal.framework is not
present. There is no conditional compiling in SDL_cocoametalview.m
either, so --disable-video-vulkan doesn't help with anything. (The
configury doesn't check darwin for x86_64 either, but it's another
story.)
I cross-build against 10.8 SDK on linux using clang-3.4.2 and this
is a problem for me. Will this be fixed?
|
|
|
d619d885
|
2017-08-28T21:42:39
|
|
Fixed bug 3662 - Error message when using the audio conversion setup without an initialized audio subsystem is a bit vague
Simon Hug
This issue actually raises the question if this API change (requirement of initialized audio subsystem) is breaking backwards compatibility. I don't see the documentation saying it is needed in 2.0.5.
|
|
|
b128e880
|
2017-08-29T00:41:45
|
|
audio: A whole bunch of improvements to audio conversion (thanks, Solra!).
"Major changes, roughly in order of appearance:
- Use float math everywhere, instead of promoting to double and casting back
all the time.
- Conserve sound energy when downmixing any channel into two other channels.
- Add a QuadToStereo filter. (The previous technique of reusing StereoToMono
never worked, since it assumed an incorrect channel layout for 4.0.)
- Add a 71to51 filter. This removes just under half of the cases the previous
code would silently break in.
- Add a QuadTo51 filter. More silent breakage fixed.
- Add a 51to71 filter, removing another almost-half of the silently broken
cases.
- Add 8 to the list of values SDL_SupportedChannelCount will accept.
- Change SDL_BuildAudioCVT's channel-related logic to handle every case, and
to actually fail if it fails instead of silently corrupting sound data and/or
crashing down the road."
(Note that SDL doesn't otherwise support 7.1 audio yet, but hopefully it will
soon and the 7.1 converters are an important piece of that. --ryan.)
Fixes Bugzilla #3727.
|
|
|
620f5342
|
2017-08-29T00:36:17
|
|
stdlib: An implementation of SDL_scalbn using ldexp() (thanks, Ozkan!).
Fixes Bugzilla #3767.
|
|
|
a0cd7d6b
|
2017-08-29T00:02:04
|
|
audio: Converting audio samples from int to float was using wrong equation.
Fixes Bugzilla #3775.
|
|
|
1067b528
|
2017-08-28T20:52:05
|
|
Fixed building with an older Mac OS X SDK
|
|
|
e8b114ec
|
2017-08-28T19:32:08
|
|
Vulkan support on Mac OS X introduces a link time dependency (CAMetalLayer) on 10.11 and newer
|
|
|
30947476
|
2017-08-28T19:30:59
|
|
We don't need the VULKAN_SDK to build SDL with Vulkan support anymore
|
|
|
09e43d45
|
2017-08-28T17:28:09
|
|
Added missing Visual Studio 2010 project for testvulkan
|
|
|
aa85436e
|
2017-08-28T14:45:19
|
|
Fixed compile warning
|
|
|
da84c3bf
|
2017-08-28T14:44:21
|
|
Added a log message for nativeRunMain()
|
|
|
60182eb7
|
2017-08-28T14:40:21
|
|
Allow overriding the main entry point on Android
|
|
|
dbb0a2aa
|
2017-08-28T14:34:15
|
|
Removed the need for libSDL2main.a on Android, and separated JNI initialization out for other integrations
|
|
|
93415899
|
2017-08-28T13:40:32
|
|
Removed unneeded Vulkan symbol definitions
|
|
|
2a945b44
|
2017-08-28T10:03:39
|
|
Fixed bug 2361 - [Android] Joysticks do not have unique IDs
David Brady
When I attempted to make a mapping file for Android gamepads, I quickly discovered that most of the ones that I have here show up as the same device (Broadcom Bluetooth HID), meaning that it was impossible to make mappings on Android, since every device looked the same.
This patch will check for the existence of the getDescriptor function added in Jelly Bean, and use it if it's there. The Android Dashboard says that the majority of Android phones should support this function, and doing it this way will not force us to bump up our API version.
|
|
|
c45932ba
|
2017-08-28T09:54:16
|
|
Fixed bug 2277 - Hardware keyboard control key sequences don't get reported
chw
Control key sequences from hardware keyboards (wireless/USB/bluetooth) get not properly reported on Android devices.
The attached patch uses the idea from http://stackoverflow.com/questions/12337117/capture-all-ctrl-under-android to make control key sequences appear as normal SDL_KEYDOWN events instead of cooked text input.
|
|
|
0560544d
|
2017-08-28T09:51:25
|
|
Fixed 3783 - Default libGL path for directFB on Linux differs from x11 path
Clayton Craft
The default path used by directfb for libGL is different than the default path used by x11 in SDL2:
./src/video/directfb/SDL_DirectFB_opengl.c:
path = "libGL.so";
./src/video/x11/SDL_x11opengl.c:
#define DEFAULT_OPENGL "libGL.so.1"
On at least one distro (Alpine Linux), libGL.so is not created (or more accurately the symlink to libGL.so.1 is not created). For consistency, the 'path' variable in SDL_DirectFB_opengl.c should patch the DEFAULT_OPENGL in SDL_x11opengl.c ("libGL.so.1")
|
|
|
d28cb702
|
2017-08-28T09:41:00
|
|
Fixed bug 3781 - unbalanced #pragma pack(pop) in close_code.h
Ozkan Sezer
Revision 288 (http://hg.libsdl.org/SDL/rev/2f5a6062db86) excluded the
Watcom compiler from forcing 4 byte structure packing in begin_code.h.
However, it missed updating close_code.h, which now has an unbalanced
#pragma pack(pop) if the compiler is Watcom. The issue seems to have
crawled into SDL2, too.
|
|
|
959ae901
|
2017-08-28T02:30:41
|
|
Instantiate the CAMetalLayer so SDL_Vulkan_CreateSurface() doesn't fail
Error message was:
[mvk-info] MoltenVK version 0.18.2. Vulkan version 1.0.51.
[***MoltenVK ERROR***] VK_ERROR_INITIALIZATION_FAILED: On-screen rendering requires a view that is backed by a layer of type CAMetalLayer.
2017-08-28 02:17:29.579 testvulkan[95627:1716939] ERROR: SDL_Vulkan_CreateSurface(): vkCreateMacOSSurfaceMVK failed: VK_ERROR_INITIALIZATION_FAILED
|
|
|
6dd3f55d
|
2017-08-28T01:59:53
|
|
Fixed WinRT build after changing the header guard preprocessor symbol
|
|
|
ff8d2e14
|
2017-08-28T01:42:18
|
|
Fixed build when Wayland is dynamically loaded
|
|
|
edaa0ef5
|
2017-08-28T00:54:02
|
|
Fixed analyzer warning "Call to 'calloc' has an allocation size of 0 bytes"
|
|
|
3c7f9d69
|
2017-08-28T00:51:14
|
|
Fixed redefinition of typedef warnings and errors on BSD
|
|
|
50efbda7
|
2017-08-28T00:43:14
|
|
Fixed mingw Windows build, since SDL_vulkan_internal.h includes windows.h
|
|
|
0d011ec6
|
2017-08-28T00:22:23
|
|
Renaming of guard header names to quiet -Wreserved-id-macro
|
|
|
ce2b1644
|
2017-08-28T00:11:38
|
|
Be clear that disabling Vulkan surface support disables the entire SDL Vulkan integration
|
|
|
5cd1a959
|
2017-08-27T23:53:09
|
|
Fixed Android build with Vulkan support
|
|
|
0cebef60
|
2017-08-27T23:39:55
|
|
Fixed code style for new Vulkan API functions
|
|
|
ea91908e
|
2017-08-27T23:39:38
|
|
Fixed Android ABI check to match vulkan/vk_platform.h
|
|
|
34bdee53
|
2017-08-27T23:31:31
|
|
Make the androidbuildlibs.sh script executable
|