kmx git

Commit	Date	Message
3663dbe8	2016-10-14T08:20:40	Fixed warning about missing field initializers in SDL_DBusContext Static variables are automatically initialized to zero.
824ecc8f	2016-10-14T08:15:39	Fixed processing mouse and keyboard events in hatari, which uses the old SDLMain.m without creating an SDLApplication instance
83cb2b63	2016-10-14T06:57:55	Fixed bug 2758 - Android issues with NDK r10c and API-21 Sylvain After a long time, I found out more clearly what was going wrong. The native libraries should be built with a "APP_PLATFORM" as low as possible. Ideally, APP_PLATFORM should be equals to the minSdkVersion of the AndroidManifest.xml So that the application never runs on a lower APP_PLATFORM than it has been built for. An additional good patch would be to write explicitly in "jni/Application.mk": APP_PLATFORM=android-10 (If no APP_PLATFORM is set, the "targetSdkVersion" of the AndroidManifest.xml is applied as an APP_PLATFORM to the native libraries. And currently, this is bad, because targetSdkVersion is 12, whereas minSdkLevel is 10. And in fact, there is a warning from ndk: "Android NDK: WARNING: APP_PLATFORM android-12 is larger than android:minSdkVersion 10 in ./AndroidManifest.xml".) to precise what happened in the initial reported test-case: Let say the "c" code contains a call to "srand()". with APP_PLATFORM=android-21, libSDL2.so contains a undef reference to "srand()". with APP_PLATFORM=android-10, libSDL2.so contains a undef reference to "srand48()". but srand() is missing on devices with APP_PLATFORM=android-10 (it was in fact replaced by srand48()). So, if you build for android-21 (where srand() is available), you will really have a call to "srand()" and it will fail on android-10. That was the issue. The path tried to fix this by in fact always calling srand48(). SDL patches that were applied are beneficial anyway, there are implicitly allowing they backward compatibility of using android-21 on a android-10 platform. It can be helpful in case you want to target a higher APP_PLATFORM than minSdkVersion to have potentially access to more functions. Eg you want to have access to GLES3 functions (or other) of "android-21". But, if dlopen() fails (on android-10), you do a fall-back to GLES2.
f3502c3c	2016-10-14T01:04:21	Fixed building with cmake when fcitx isn't installed
8e2634eb	2016-10-14T00:51:57	Fixed divide by zero if setting integer scale without setting logical width and height
662f966c	2016-10-13T08:46:34	Fixed bug 3355 - false "Invalid renderer" after creating an "opengles2" renderer. Call SDL_GL_GetDrawableSize() directly because we may be in the initialization path and SDL_GetRendererOutputSize() will fail because the renderer magic isn't set up yet.
e4af8ce9	2016-10-13T04:57:31	Fixed typo getting the drawable size
063f752e	2016-10-13T04:54:43	Fixed bug 3328 - Race condition in Wayland_VideoInit Robert Folland When running this little test program with SDL2 on Wayland it often crashes in SDL_Init. From a backtrace it is apparent that there is a race condition in creating a xkb_context_ref. Sometimes it is 0x0. By moving the relevant lines higher up in Wayland_VideoInit (in SDL2-2.0.4/src/video/wayland/SDL_waylandvideo.c:302) this seems to get fixed. I moved the call to WAYLAND_xkb_context_new() up to before the call to WAYLAND_wl_display_connect(). Here is the test program (just a loop of init and quit), and a backtrace from gdb: #include <cstdio> #include <stdlib.h> #include <SDL2/SDL.h> #include <unistd.h> #include <iostream> int main(int argc, char **argv) { int count = atoi(argv[1]); for (int i = 0; i < count; i++) { std::cout << "Init " << i << std::endl; if (SDL_Init(SDL_INIT_VIDEO) < 0) { SDL_LogError(SDL_LOG_CATEGORY_APPLICATION, "Couldn't initialize SDL: %s\n", SDL_GetError()); return 1; } std::cout << "Quit" << std::endl; SDL_Quit(); } return 0; } Init 12 Quit Init 13 Program received signal SIGSEGV, Segmentation fault. xkb_context_ref (ctx=ctx@entry=0x0) at src/context.c:156 156 ctx->refcnt++; (gdb) bt #0 xkb_context_ref (ctx=ctx@entry=0x0) at src/context.c:156 #1 0x00007ffff5e1cd4c in xkb_keymap_new (ctx=0x0, format=XKB_KEYMAP_FORMAT_TEXT_V1, flags=flags@entry=XKB_KEYMAP_COMPILE_NO_FLAGS) at src/keymap-priv.c:65 #2 0x00007ffff5e1c6cc in xkb_keymap_new_from_buffer (ctx=<optimized out>, buffer=0x7ffff7fd5000 "xkb_keymap {\nxkb_keycodes \"(unnamed)\" {\n\tminimum = 8;\n\tmaximum = 255;\n\t<ESC>", ' ' <repeats 16 times>, "= 9;\n\t<AE01>", ' ' <re peats 15 times>, "= 10;\n\t<AE02>", ' ' <repeats 15 times>, "= 11;\n\t<AE03>", ' ' <repeats 15 times>, "= 12;\n\t<AE04>", ' ' <repeats 12 times>..., length=48090, format=<optimized out>, flags=<optimized out>) at src/keymap.c:191 #3 0x00007ffff7b8ea4e in keyboard_handle_keymap (data=0x6169b0, keyboard=<optimized out>, format=<optimized out>, fd=5, size=48091) at /home/vlab/abs/sdl2/src/SDL2-2.0.4/src/video/wayland/SDL_waylandevents.c:269 #4 0x00007ffff64501f0 in ffi_call_unix64 () from /usr/lib/libffi.so.6 #5 0x00007ffff644fc58 in ffi_call () from /usr/lib/libffi.so.6 #6 0x00007ffff665be3e in wl_closure_invoke (closure=closure@entry=0x61f000, flags=flags@entry=1, target=<optimized out>, target@entry=0x616d20, opcode=opcode@entry=0, data=<optimized out>) at src/connection.c:949 #7 0x00007ffff6658be0 in dispatch_event (display=<optimized out>, queue=<optimized out>) at src/wayland-client.c:1274 #8 0x00007ffff6659db4 in dispatch_queue (queue=0x617398, display=0x6172d0) at src/wayland-client.c:1420 #9 wl_display_dispatch_queue_pending (display=0x6172d0, queue=0x617398) at src/wayland-client.c:1662 #10 0x00007ffff665a0cf in wl_display_roundtrip_queue (display=0x6172d0, queue=0x617398) at src/wayland-client.c:1085 #11 0x00007ffff7b8faa0 in Wayland_VideoInit (_this=<optimized out>) at /home/vlab/abs/sdl2/src/SDL2-2.0.4/src/video/wayland/SDL_waylandvideo.c:302 #12 0x00007ffff7b7aed6 in SDL_VideoInit_REAL (driver_name=<optimized out>, driver_name@entry=0x0) at /home/vlab/abs/sdl2/src/SDL2-2.0.4/src/video/SDL_video.c:513 #13 0x00007ffff7ae0ee7 in SDL_InitSubSystem_REAL (flags=16416) at /home/vlab/abs/sdl2/src/SDL2-2.0.4/src/SDL.c:173 #14 0x0000000000400b24 in main (argc=2, argv=0x7fffffffebb8) at vplay-init.cpp:13 (gdb)
f94bd057	2016-10-13T04:53:01	Fixed bug 3451 - Raspberry Pi Raspbian SDL_assert triggered sometimes at RPI_WarpMouseGlobal Eric wing Sometimes an SDL_assert triggers at RPI_WarpMouseGlobal src/video/raspberry/SDL_rpimouse.c:232 'update'. It doesn't always reproduce, but it seems to happen when you really bog down the system and the event loop can't update for awhile. The first time I hit this, I wasn't even using the mouse. I don't call any warp mouse functions either. I can usually reproduce with a simple program that runs an expensive blocking CPU series of functions which blocks the main loop until complete (can be up to 10 seconds). Sometimes this assertion gets triggered after that. I'm not sure if they are related or coincidental. Disabling the SDL_asserts when compiling SDL will avoid this problem. I actually haven't seen any problems with the mouse when I do this. On a Raspberry Pi 2 running Raspbian Jessie.
c490b54e	2016-10-13T04:01:25	Fixed black screen on Steam Link
3f167a5a	2016-10-13T02:19:23	Added support for the PS4 Slim controller, model CUH-ZCT2U
cb7b823c	2016-10-13T02:09:37	Fixed black screen on Steam Link
741aaf4c	2016-10-12T22:34:54	Added a note on how to allow non-root applications to increase their thread priority on Linux
62310c6b	2016-10-12T22:25:19	Work-around for a hang when USB devices are unplugged, contributed by James Zipperer
14e7da75	2016-10-12T19:50:16	Backed out change 7d3df1df4e91 which was: Fixed bug 3320 - SDL_windows_main.c defines both console application entry points With that change only the wmain() entry point was defined, and applications that linked with main() would no longer build.
4c9f3139	2016-10-12T18:57:12	Added note for David Carlier's work on OpenBSD
47590424	2016-10-12T18:46:17	Build SDL as universal binary
3a77b42d	2016-10-12T18:45:56	Fixed build warning
f6bcfa01	2016-10-12T23:38:31	X11: Fixed compile warning about unused variable.
ed80cfd9	2016-10-12T23:36:49	Removed empty statements in tests.
9d0e0749	2016-10-12T23:36:29	Linux: Removed redundant function call.
cfb24c76	2016-10-12T00:01:17	Fixed pointer signedness warning
3b3dd9af	2016-10-11T23:56:52	Updated WhatsNew with 2.0.5 changes
f5c2bf12	2016-10-11T23:21:41	Fixed comment for new pixel formats
36e40d30	2016-10-11T23:19:05	Fixed bug 2923 - Add SDL_PIXELFORMAT_RGBA32 for byte-wise 32bit RGBA data Daniel Gibson Ok, I followed the simple approach of just making SDL_PIXELFORMAT_RGBA32 an alias of SDL_PIXELFORMAT_RGBA8888/SDL_PIXELFORMAT_ABGR8888, depending on endianess. And I did the same for SDL_PIXELFORMAT_ARGB32, .._BGRA, .._ABGR. SDL_GetPixelFormatName() will of course return SDL_PIXELFORMAT_RGBA8888 (or SDL_PIXELFORMAT_ABGR8888) instead of SDL_PIXELFORMAT_RGBA32, but as long as that's mentioned in the docs it shouldn't be a problem.
8a0704d1	2016-10-11T16:36:40	cmake: Now generates Wayland protocol source bits like the configure script. Fixes Bugzilla #3430.
564c790f	2016-10-11T17:31:29	Fixed a memory leak in function GL_RenderReadPixels
fed9b604	2016-10-10T23:26:26	Use SDL C runtime strlen()
ca42373f	2016-10-10T15:29:18	alsa: more tapdancing to enumerate physical hardware devices. Apparently some systems see "hw:", some see "default:" and some see "sysdefault:" (and maybe others!). My workstation sees both "hw:" and "sysdefault:" ... Try to find a prefix we like and prioritize the prefixes we (think) we want most. If everything else fails, if there's a "default" (not a prefix) device name, list that by itself so the user gets _something_ here. If we can't find a prefix we like _and_ there's no "default" device, report no hardware found at all.
aae28e3e	2016-10-10T18:28:05	Fixed bug 3096 - SDL_BlitSurface with overlapping source and destination
9db5e9aa	2016-10-10T02:58:29	Made #if defined(X) consistent
6dedbc43	2016-10-10T02:58:12	Make sure we have iconv.h before building with it
367a6a3d	2016-10-09T20:31:32	Fixed compiling of three test programs with C++.
f9b15a94	2016-10-09T20:31:04	Linux: Fixed mixed up scancodes.
f662f680	2016-10-09T20:30:49	iOS: Updated demo README.
42f85aa2	2016-10-08T11:30:07	Fixed building and using fcitx IME support on Linux
27d4f099	2016-10-07T23:40:44	Implemented SDL_GetHintBoolean() to make it easier to check boolean hints
52ae92ea	2016-10-07T19:08:22	ALSA_snd_pcm_drop() can hang on some systems (Steam Link) so don't use that when shutting down the ALSA audio driver.
808c75d1	2016-10-07T18:57:40	Fixed bug 2824 - Add Fcitx Input Method Support Weitian Leung Just moved ibus direct call to SDL_IME_* related functions, and adds fcitx IME support (uses DBus, too), enable with env: SDL_IM_MODULE=fcitx (ibus still the default one)
89abbbfe	2016-10-07T18:24:34	Fixed bug 3438 - SDL_GameControllerEventWatcher: Log on event with value >= k_nMaxReverseEntries
eea76fc1	2016-10-07T18:11:03	Fixed bug 3063 - Wayland: SDL resizes EGL surface to 0x0. x414e54 Wayland will sometimes send empty resize events (0 width and 0 height) to the client. I have not worked out the exact conditions a client would receive these but I can assume it might be if the window is offscreen or not mapped yet. This causes issues with some SDL clients as they receive the 0x0 event and unexpected resize event or might not request to resize back to the correct size. As per the wl_shell Wayland spec configure events are only a suggestion and the client is free to ignore or pick a different size (this is how min/max and fixed aspect ratio is supped to be implemented). A patch is attached but is just the first iteration and I will fix any issues such as checking for FULLSCREEN/MAXIMIZED or RESIZABLE flags unless someone else fixes this first. I have update to take into account non resizable and fullscreen windows. Also adding in maximize/restore and title functions for Wayland.
62b9e1c7	2016-10-07T18:09:09	Fixed bug 3061 - Selecting the dummy video driver on Mac OS X results in an error Darren Kulp The dummy video driver is not available on Mac OS X if SDL_VIDEO_OPENGL is set at library compilation time. In src/video/SDL_video.c, there is a compile-time check in SDL_CreateWindow() for (SDL_VIDEO_OPENGL && __MACOSX__). When it succeeds, SDL_WINDOW_OPENGL is always requested. Since the dummy video driver does not supply an OpenGL implementation, the error "No OpenGL support in video driver" is supplied to the user, and SDL_CreateWindow() is exited early.
abefe785	2016-10-07T18:03:08	Fixed bug 3043 - fix alsa configury and cmake checks Ozkan Sezer SDL's alsa uses snd_pcm_recover() which has been available only since alsa-lib-1.0.11.
9c483655	2016-10-07T18:00:30	Fixed bug 3029 - software renderer cuts off edges when rotate-blitting with a multiple of 90 degrees Adam M. When doing a rotated texture copy with the software renderer, where the angle is a multiple of 90 degrees, one or two edges of the image get cut off. This is because of the following line in sw_rotate.c: if ((unsigned)dx < (unsigned)sw && (unsigned)dy < (unsigned)sh) { which is effectively saying: if (dx >= 0 && dx < src->w-1 && dy >= 0 && dy < src->h-1) { As a result, it doesn't process pixels in the right column or bottom row of the source image (except when they're accessed as part of the bilinear filtering for nearby pixels). This causes it to look like the edges are cut off, and it's especially obvious with an exact multiple of 90 degrees.
5c2320f1	2016-10-07T17:58:02	Fixed bug 3022 - SDL_UnlockMutex(SDL_EventQ.lock) in SDL_PeepEvents can cause error when lock is null
d3cbc664	2016-10-07T17:49:33	Fixed bug 2983 - Update Android.readme to include Tegra Graphics Debugger compatibility tip Michael Labb? NVidia has released some pretty nice Tegra profiling tools for their Android devices. The NVidia Tegra Graphics Debugger works by providing an interposer library that intercepts ES2 and EGL calls. You must link against these libraries. Unfortunately, this quietly fails with SDL2 because libEGL and libGLES2 are dynamically loaded with dlopen(). NVidia offers a secondary approach to using the Tegra Graphics Debugger: root your device and install a global interposer library. Almost no devs will try this first if they don?t have a rooted device. I propose an update to the Android readme that explains why the static linking approach recommended by NVidia doesn?t work.
104c9541	2016-10-07T17:46:58	Converted README documentation to DOS text format
bf076c22	2016-10-07T17:30:21	Fixed bug 2957 - De-reference rz_src without NULL check in SDLgfx_rotateSurface function Nitz In function SDLgfx_rotateSurface: rz_dst = SDL_CreateRGBSurface(SDL_SWSURFACE, dstwidth, dstheight + GUARD_ROWS, rz_src->format->Rmask, rz_src->format->Gmask, rz_src->format->Bmask, rz_src->format->Amask); Here rz_src get De-referenced without NULL check, which is risky.
8b64a78d	2016-10-07T17:26:25	Fixed bug 2956 - De-reference videodata without NULL check in X11_DispatchEvent(_THIS) function
93ff12ce	2016-10-07T17:23:20	Fixed bug 2952 - SDL_MixAudioFormat does not support audio format AUDIO_U16LSB/AUDIO_U16MSB Simon Sandstr?m As stated in Summary. The switch statement will execute the default case and set a SDL error message: "SDL_MixAudio(): unknown audio format". There are atleast two more problems here: 1. SDL_MixAudioFormat does not notify the user that an error has occured and that a SDL error message was set. It took me awhile to understand why I couldn't mix down the volume on my AUDIO_U16LSB formatted audio stream.. until I started digging in the SDL source code. 2. The error message is incorrect, it should read: "SDL_MixAudioFormat(): unknown audio format".
d2676c29	2016-10-07T17:04:58	Fixed bug 2924 - SDL_CreateRGBSurface[From] versions that take SDL_PIXELFORMAT enum Daniel Gibson Currently, SDL_CreateRGBSurface() and SDL_CreateRGBSurfaceFrom() take Uint32 masks for RGBA to "describe" the Pixelformat of the surface. Internally those value are only used to map to one of the SDL_PIXELFORMAT_* enum values that are used for further processing. I think it would be both handy and more efficient to be able to specify SDL_PIXELFORMAT_* yourself without using SDL_PixelFormatEnumToMasks() to create masks first, so I implemented functions that do that: SDL_CreateRGBSurfaceWithFormat() and SDL_CreateRGBSurfaceWithFormatFrom() which are like the versions without "WithFormat" but instead of taking 4 Uint32s for R/G/B/A masks, they take one for a SDL_PIXELFORMAT_* enum value. Together with https://bugzilla.libsdl.org/show_bug.cgi?id=2923 creating a SDL_Surface* from RGBA data (e.g. from stb_image) is as easy as surf = SDL_SDL_CreateRGBSurfaceWithFormat(0, w, h, bppToUse*8, SDL_PIXELFORMAT_RGBA32);
73f2c541	2016-10-07T16:44:42	Fixed bug 2885 - SDL_stdinc.h doesn't need to include iconv.h Ryan C. Gordon We still include iconv.h in SDL_stdinc.h, probably because this header might have referenced the native iconv functions and types directly. Since these are hidden behind a stable ABI now and never just a #define for the system iconv, we shouldn't need this header included from a public SDL header anymore, slowing down external apps compiles and pulling tons of stuff into the namespace.
7d2108ce	2016-10-07T19:39:43	audio: Backed out the audio-thread detaching changes. It added a ton of complexity. A simpler solution might arise at some point though.
24df68ea	2016-10-07T16:32:58	Fixed bug 2833 - Access Violation on SDL_PollEvent after init, delay and quit of joystick subsystem Jan Klass Not sure if this is limited to the joystick subsystem, but I created a minimal program for reproducibility, which is attached. The issue occurs with my gamepad Razer Onza (an xbox-style gamepad) plugged in. On initialization, the gamepad is being recognized. After quitting the subsystem, the poll will receive the joystick added event, which it instantly handles itself, calling SDL_SYS_JoystickDetect again, which this time calls IDirectInput8_EnumDevices with dinput = NULL (after it was released on quit). This seems to lead to an access violation within said function, which I have no source for.
dac38928	2016-10-07T16:19:50	Fixed bug 2832 - Inverted arrow-key navigation in MessageBox Jan Hellwig On Windows, you are able to navigate between the buttons on a MessageBox that was created using SDL_ShowMessageBox using the arrow keys. However, if you press the left arrow key, the selection jumps to the button on the right of the currently selected one (and vice versa). This can be fixed by reversing the order in which the buttons are added to the dialog. The attached patch files fixes this problem. However the first press of an arrow key leads to the selection of the leftmost or rightmost button on the MessageBox, not to the selection of the button left/right of the one that is selected by default.
8bc5c57d	2016-10-07T16:13:37	Fixed recentering triggers when the application doesn't have focus
72164985	2016-10-07T16:04:15	Fixed bug 2823 - Release events for triggers receive wrong centered value Ryochan7 I have been using SDL 2 for a little project that I have been developing for a while. My project is called antimicro and it takes gamepad input and then translates gamepad events into keyboard and mouse events. SDL is used to read the input from an XInput gamepad and it works great for the most part. However, there is one glaring problem that I have encountered. When a device is unplugged and SDL sends the centered value release events for all axes, buttons, and hats, SDL does not use the proper centered value for the triggers. It pushes an SDL_JOYAXISMOTION event onto the queue with a value of 0 for all axes. That value is converted to around 16,000 for a Game Controller. That value is incorrect for triggers and, in my program, that causes any bindings that are assigned to the triggers to get activated. With most profiles, that will typically mean that a mouse right click and left click will be activated before the device is finally seen as removed and then those bindings are released by antimicro.
f674f231	2016-10-07T15:21:19	Fixed bug 2808 - Fix SDL reporting wrong window size on resume Jonas Kulla At startup time, the single android window is assigned a "windowed" (window->windowed.{w,h}) size based on the current orientation of the mobile device; this size is never updated throughout the lifetime of the app. This becomes problematic when the app is paused and then resumed in an orientation that it did not start up in. Eventually, 'SDL_OnWindowRestored()' is called, which calls 'SDL_UpdateFullscreenMode()'. This function is very problematic because it is written with a desktop monitor in mind: it tries to find a matching display mode for the windowed size, doesn't find any, and finally applies the windowed size as the fullscreen one. In the end, the windowed size is reported in a RESIZED event, which doesn't correspond to the actual surface size. To see this in action: Start an orientation aware SDL app in eg. portrait mode, suspend the app, put the device into landscape orientation and resume the app. It will erroneously render in portrait mode (until the device is rotated again).
5c1ab403	2016-10-07T15:08:37	Applied Ubuntu patch bug_822210_fix_sdl2-config.cmake_whitespace.patch
f6a280ab	2016-10-07T15:13:46	audio: Don't trust audio drivers to drain pending audio. This tends to be a frequent spot where drivers hang, and the waits were often unreliable in any case. Instead, our audio thread now alerts the driver that we're done streaming audio (which currently XAudio2 uses to alert the system not to warn about the impending underflow) and then SDL_Delay()'s for a duration that's reasonable to drain the DMA buffers before closing the device.
551cdc8d	2016-10-07T14:42:24	audio: better way to calculate buffer drain wait times.
76f48acf	2016-10-07T14:35:25	audio: threading and device hang improvements. This tries to make SDL robust against device drivers that have hung up, apps don't freeze in catastrophic (but not necessarily uncommon) conditions. Now we detach the audio thread and let it clean up and don't care if it never actually runs to completion.
3b0c7936	2016-10-07T11:18:55	Some systems include both "default:" and "hw:" for the same usb device
8e199461	2016-10-06T06:08:16	fix for finding ALSA hotplug devices on Steam Link James Zipperer The device names show up as "default:", not "hw:"
9257b72d	2016-10-05T00:12:16	Backed out a very unsafe change that was trying to prevent audio hang at quit. Ryan and I have ideas on a better way to handle this.
46f44f66	2016-10-04T14:25:31	Fixed potential buffer overflow in SDL_vsnprintf() (thanks, Taylor!). Fixes Bugzilla #3441. "When using internal SDL_vsnprintf(), and source string length is greater than destination, the final NULL char will be written beyond destination size. Primary issue that is SDL_strlcpy returns length of source string (SDL_PrintString()), not how much is written to destination. The destination ptr is then incremented by this length before the sanity check is done. Destination string is properly terminated, but an extra NULL char will be written beyond destination buffer length. Patch used internally is attached which fixes primary issue with SDL_strlcpy() in SDL_PrintString() and adjusts sanity checks to increment destination ptr safely."
bac61096	2016-10-04T06:48:07	ensure SDL_AUDIODEVICEREMOVED gets sent when hotplug removes a device James Zipperer The problem I was seeing was that the the ALSA hotplug thread would call SDL_RemoveAudioDevice, but my application code was not seeing an SDL_AUDIODEVICEREMOVED event to go along with it. To fix it, I added some code into SDL_RemoveAudioDevice to call SDL_OpenedAudioDeviceDisconnected on the corresponding open audio device. There didn't appear to be a way to cross reference the handle that SDL_RemoveAudioDevice gets and the SDL_AudioDevice pointer that SDL_OpenedAudioDeviceDisconnected needs, so I ended up adding a void handle field to struct SDL_AudioDevice so that I could do the cross reference. Is there some other way beside adding a void handle field to the struct to get the proper information for SDL_OpenedAudioDeviceDisconnected?
69cf1703	2016-10-04T06:46:46	fix deadlock on close device James Zipperer snd_pcm_drain doesn't always drain when you unplug a usb device. Use snd_pcm_drop instead
2558c9c8	2016-10-04T06:45:28	fix audio deadlock James Zipperer Close the audio device before waiting for the audio thread to complete, which fixes a situation where the audio thread never completes Add an additional check in the audio thread to see if the device is enabled and bail out if the device is no longer enabled
56c88c45	2016-10-04T04:08:02	Modified the custom cursor test to be able to load BMP files as cursors
a21a227a	2016-10-04T03:50:28	Fixed bug 3021 - HapticOpenFromJoystick() problems Joe Thompson With Direct Input device (MOMO Steering Wheel w/FF) with SDL 2.0.3, SDL_HapticOpenFromJoystick() would fail. (Can't set exclusive mode) Now with 2.0.4 rc1, SDL_HapticOpenFromJoystick() succeeds but the the returned SDL_Haptic* cannot be used. Calls to SDL_HapticNewEffect() fail with "Haptic error Unable to create effect" If SDL_HapticOpen() is used instead of HapticOpenFromJoystick(), the device is usable. Calls to HapticNewEffect() succeed with the exact same parameters as the previous failing call. I have attached a proposed patch for this issue. When using SDL_HapticOpenFromJoystick(), the original code did not (re)enumerate the axes. This returned a new haptic device with 0 axes. Later, when a new effect is created, SDL_SYS_SetDirection() would set the flags to include DIEFF_SPHERICAL, regardless of what the caller actually set. (see Line 566 in SDL_dinputhaptic.c). This would cause the SDL_HapticNewEffect() to fail (or interpret the coordinates incorreclty.) The patch moves the call to IDirectInputDevice8_EnumObjects() outside of the if() block so that the axes are (re)enumerated for the new haptic device. Note: For steering wheels it is common for the joystick to have multiple axes (ie steering, throttle, brake), but the haptic portion of the joystick usually only applies to steering.
1051dceb	2016-10-04T03:42:42	Fixed compiler warning about missing field initializers
5d5127c4	2016-10-04T03:38:39	Fixed compiler warning - this should have been a const char pointer
351adf15	2016-10-04T02:11:52	Fixed bug 2157 - Caps Lock key produces key down & key up events while key is still pressed. Tim McDaniel Using checkkeys test app: * Press and hold Caps Lock key. * checkkeys reports a CapsLock key pressed event and a CapsLock key released event. * Release Caps Lock key. * checkkeys reports no further events. This patch fixes OSX Caps Lock up/down event detection by installing a HID callback.
d9e3972a	2016-10-03T15:31:11	Fix invalid read from poor setlocale usage.
34eebfba	2016-10-03T03:42:10	Fixed setting the version info in the shared library when using CMake Ray Molenkamp When building sdl as shared lib, the version info is lacking in the final binary. CMake gathers the right resource files into ${VERSION_SOURCES} but then doesn't do anything with them.
752931d8	2016-10-03T11:35:34	Improve X11 key handling when XKB isn't available + add xvnc scancodes. Based on a patch by Bill Lash (see bug 3094).
05ca784e	2016-10-02T22:32:50	Android: Fixed compile error.
67bf5cac	2016-10-02T22:32:35	Fixed wrong pixel format if reading pixels from OpenGL renderer.
f8aa4291	2016-10-02T22:32:18	Added brackets to function names in header comments so that doxygen links them.
969c3167	2016-10-01T18:49:15	Fixed MinGW-w64 build warnings in SDL_render_d3d11.c Some of these were legitimate bugs, including: - a malformed SDL_snprintf call - a probably-invalid enum comparison
702d9348	2016-10-01T15:23:43	Added SDL prefix to local IID constants
8500de8f	2016-10-01T19:16:46	Fix tabs -> spaces
4e6f2199	2016-10-01T15:14:48	Fixed bug 3065 - Screen is flickering during closing on-screen keyboard on Android Deve When I'm trying to close on-screen keyboard using SDL_StopTextInput() function by touching the screen (SDL_FINGERUP or SDL_FINGERDOWN event), the screen is flickering. It is white for a while. Note that it usually works without problems when I use phone's "back" button. I noticed flickering occasionally too, but not that often. Philipp Wiesemann The attached patch maybe fixes the flicker but not the actual fault causing it.
f0539aa2	2016-10-01T19:12:58	Fix bug 3436 - SDL_RaiseWindow not working on windows
c9be93c6	2016-10-01T15:11:18	Fixed bug 3078 - cmake: fix sdl2.m4 install location on cross hosts Timo Gurr On cross hosts running autotools for SDL2_gfx-1.0.1 fails to find sdl2.m4: eautoreconf: running in /var/tmp/paludis/build/media-libs-SDL2_gfx-1.0.1/work/SDL2_gfx-1.0.1 ... aclocal aclocal-1.13: warning: autoconf input should be named 'configure.ac', not 'configure.in' configure.in:128: warning: macro 'AM_PATH_SDL2' not found in library libtoolize --copy --force --automake aclocal aclocal-1.13: warning: autoconf input should be named 'configure.ac', not 'configure.in' configure.in:128: warning: macro 'AM_PATH_SDL2' not found in library autoconf configure.in:128: error: possibly undefined macro: AM_PATH_SDL2 If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation. * Failed Running autoconf ! SDL2 installs it to /usr/x86_64-pc-linux-gnu/share/aclocal on cross hosts, attached patch makes use of CMAKE_INSTALL_FULL_DATAROOTDIR to support correctly installing to the arch independent location /usr/share/aclocal.
3c8a2698	2016-10-01T18:10:50	WinRT: build fix in joystick code
7851eb08	2016-10-01T18:10:15	Fixed bug 3437 - build error for WinRT/UWP .dlls, caused by fix for SDL bug 3336 This fix has been tested with both MinGW-w64, and Visual C++ 2012-2015.
ac7d1174	2016-10-01T15:04:13	Fixed build on older Raspberry Pi environments
a0d3e0d6	2016-10-01T14:56:53	Fixed warning and code style in SDL_evdev.c
d2c8c509	2016-10-01T14:54:05	Fixed build for X11
7b34f47e	2016-10-01T14:50:22	Fixed windows build
fa0f4176	2016-10-01T14:48:18	Fixed build warnings and errors
fae5d0ea	2016-10-01T14:34:52	Fixed bug 3107 OSX - Process events in SDLApplication to fix integration with CEF. John Wordsworth While attempting to integrate CEF (Browser) into an SDL application, we noticed that there were problems on OS X where approximately 50% of the input events were essentially being lost - even when we were using off-screen rendering in CEF and passing through input events manually. It appears that this problem has been around for a while (see: http://www.magpcss.org/ceforum/viewtopic.php?f=6&t=11141). Please consider the following patch that fixes this issue. Instead of processing events directly after calling [NSApp nextEventMatchingMask:...] we now pass these events down to NSApp, for processing by an overloaded sendEvent: method. Chromium also forwards events to NSApp in the same way, which means we don't miss events, even if they were originally dequeued by CEF.
c8cfccc2	2016-10-01T14:31:00	Fixed bug 3116 - renderer->hidden in SDL_RenderCopy(Ex) Daniel Seems like check of the visibility of renderer (renderer->hidden) is missing in SDL_RenderCopyEx. In SDL_RenderCopy it should be done much earlier (after checking support for RenderCopyEx, line 1750).
359f59ae	2016-10-01T14:22:10	Fixed bug 3130 - Spacebar not responding Alex Baines Make sure group is valid before passing it to XkbKeysymToKeycode.
555e6c96	2016-10-01T14:18:29	Fix SDL not resizing window when Android screen resolution changes
0250eb3c	2016-10-01T14:16:04	Fixed bug 3134 - CalculateXRandRRefreshRate() returns incorrect refresh rate due to floating point truncation. Michael In SDL_x11modes.c the CalculateXRandRRefreshRate() function performs integer math on values that may return fractional results. This causes a value that would be calculated as 59.99972... to be returned as 59. In Linux the xrandr command returns 60Hz for this particular display mode yet SDL returns 59Hz. I suggest this function be updated to correctly round the result of the calculation instead of truncating the result.
64180d22	2016-10-01T14:05:35	Fixed bug 3138 - c_dfDIJoystick2 already defined in dinput8.lib Machiel van Hooren In SDL_dxjoystick.c line 349 there is a constant c_dfDIJoystick2. However, this constant is aparently also defined in dinput8.lib. I encountered a linking error when statically linking to SDL: SDL2_static.lib(SDL_dxjoystick.obj) : error LNK2005: _c_dfDIJoystick2 already defined in dinput8.lib My application is also linking to dinput8.lib because we rolled our own joystick input and are not using the joystick functionality from SDL.
da6197c5	2016-10-01T13:59:59	Fixed 3149 - Mouse Pointer Raspberry Pi corrupt when moving over screen edges Patrick Gutlich The mouse cursor gets corrupted when the mouse moves over the screen edges (right and bottom) a weird type of scaling seems to occur and you end up with a blank square.

3663dbe8

2016-10-14T08:20:40

Fixed warning about missing field initializers in SDL_DBusContext Static variables are automatically initialized to zero.

824ecc8f

2016-10-14T08:15:39

Fixed processing mouse and keyboard events in hatari, which uses the old SDLMain.m without creating an SDLApplication instance

83cb2b63

2016-10-14T06:57:55

Fixed bug 2758 - Android issues with NDK r10c and API-21 Sylvain After a long time, I found out more clearly what was going wrong. The native libraries should be built with a "APP_PLATFORM" as low as possible. Ideally, APP_PLATFORM should be equals to the minSdkVersion of the AndroidManifest.xml So that the application never runs on a lower APP_PLATFORM than it has been built for. An additional good patch would be to write explicitly in "jni/Application.mk": APP_PLATFORM=android-10 (If no APP_PLATFORM is set, the "targetSdkVersion" of the AndroidManifest.xml is applied as an APP_PLATFORM to the native libraries. And currently, this is bad, because targetSdkVersion is 12, whereas minSdkLevel is 10. And in fact, there is a warning from ndk: "Android NDK: WARNING: APP_PLATFORM android-12 is larger than android:minSdkVersion 10 in ./AndroidManifest.xml".) to precise what happened in the initial reported test-case: Let say the "c" code contains a call to "srand()". with APP_PLATFORM=android-21, libSDL2.so contains a undef reference to "srand()". with APP_PLATFORM=android-10, libSDL2.so contains a undef reference to "srand48()". but srand() is missing on devices with APP_PLATFORM=android-10 (it was in fact replaced by srand48()). So, if you build for android-21 (where srand() is available), you will really have a call to "srand()" and it will fail on android-10. That was the issue. The path tried to fix this by in fact always calling srand48(). SDL patches that were applied are beneficial anyway, there are implicitly allowing they backward compatibility of using android-21 on a android-10 platform. It can be helpful in case you want to target a higher APP_PLATFORM than minSdkVersion to have potentially access to more functions. Eg you want to have access to GLES3 functions (or other) of "android-21". But, if dlopen() fails (on android-10), you do a fall-back to GLES2.

f3502c3c

2016-10-14T01:04:21

Fixed building with cmake when fcitx isn't installed

8e2634eb

2016-10-14T00:51:57

Fixed divide by zero if setting integer scale without setting logical width and height

662f966c

2016-10-13T08:46:34

Fixed bug 3355 - false "Invalid renderer" after creating an "opengles2" renderer. Call SDL_GL_GetDrawableSize() directly because we may be in the initialization path and SDL_GetRendererOutputSize() will fail because the renderer magic isn't set up yet.

e4af8ce9

2016-10-13T04:57:31

Fixed typo getting the drawable size

063f752e

2016-10-13T04:54:43

Fixed bug 3328 - Race condition in Wayland_VideoInit Robert Folland When running this little test program with SDL2 on Wayland it often crashes in SDL_Init. From a backtrace it is apparent that there is a race condition in creating a xkb_context_ref. Sometimes it is 0x0. By moving the relevant lines higher up in Wayland_VideoInit (in SDL2-2.0.4/src/video/wayland/SDL_waylandvideo.c:302) this seems to get fixed. I moved the call to WAYLAND_xkb_context_new() up to before the call to WAYLAND_wl_display_connect(). Here is the test program (just a loop of init and quit), and a backtrace from gdb: #include <cstdio> #include <stdlib.h> #include <SDL2/SDL.h> #include <unistd.h> #include <iostream> int main(int argc, char **argv) { int count = atoi(argv[1]); for (int i = 0; i < count; i++) { std::cout << "Init " << i << std::endl; if (SDL_Init(SDL_INIT_VIDEO) < 0) { SDL_LogError(SDL_LOG_CATEGORY_APPLICATION, "Couldn't initialize SDL: %s\n", SDL_GetError()); return 1; } std::cout << "Quit" << std::endl; SDL_Quit(); } return 0; } Init 12 Quit Init 13 Program received signal SIGSEGV, Segmentation fault. xkb_context_ref (ctx=ctx@entry=0x0) at src/context.c:156 156 ctx->refcnt++; (gdb) bt #0 xkb_context_ref (ctx=ctx@entry=0x0) at src/context.c:156 #1 0x00007ffff5e1cd4c in xkb_keymap_new (ctx=0x0, format=XKB_KEYMAP_FORMAT_TEXT_V1, flags=flags@entry=XKB_KEYMAP_COMPILE_NO_FLAGS) at src/keymap-priv.c:65 #2 0x00007ffff5e1c6cc in xkb_keymap_new_from_buffer (ctx=<optimized out>, buffer=0x7ffff7fd5000 "xkb_keymap {\nxkb_keycodes \"(unnamed)\" {\n\tminimum = 8;\n\tmaximum = 255;\n\t<ESC>", ' ' <repeats 16 times>, "= 9;\n\t<AE01>", ' ' <re peats 15 times>, "= 10;\n\t<AE02>", ' ' <repeats 15 times>, "= 11;\n\t<AE03>", ' ' <repeats 15 times>, "= 12;\n\t<AE04>", ' ' <repeats 12 times>..., length=48090, format=<optimized out>, flags=<optimized out>) at src/keymap.c:191 #3 0x00007ffff7b8ea4e in keyboard_handle_keymap (data=0x6169b0, keyboard=<optimized out>, format=<optimized out>, fd=5, size=48091) at /home/vlab/abs/sdl2/src/SDL2-2.0.4/src/video/wayland/SDL_waylandevents.c:269 #4 0x00007ffff64501f0 in ffi_call_unix64 () from /usr/lib/libffi.so.6 #5 0x00007ffff644fc58 in ffi_call () from /usr/lib/libffi.so.6 #6 0x00007ffff665be3e in wl_closure_invoke (closure=closure@entry=0x61f000, flags=flags@entry=1, target=<optimized out>, target@entry=0x616d20, opcode=opcode@entry=0, data=<optimized out>) at src/connection.c:949 #7 0x00007ffff6658be0 in dispatch_event (display=<optimized out>, queue=<optimized out>) at src/wayland-client.c:1274 #8 0x00007ffff6659db4 in dispatch_queue (queue=0x617398, display=0x6172d0) at src/wayland-client.c:1420 #9 wl_display_dispatch_queue_pending (display=0x6172d0, queue=0x617398) at src/wayland-client.c:1662 #10 0x00007ffff665a0cf in wl_display_roundtrip_queue (display=0x6172d0, queue=0x617398) at src/wayland-client.c:1085 #11 0x00007ffff7b8faa0 in Wayland_VideoInit (_this=<optimized out>) at /home/vlab/abs/sdl2/src/SDL2-2.0.4/src/video/wayland/SDL_waylandvideo.c:302 #12 0x00007ffff7b7aed6 in SDL_VideoInit_REAL (driver_name=<optimized out>, driver_name@entry=0x0) at /home/vlab/abs/sdl2/src/SDL2-2.0.4/src/video/SDL_video.c:513 #13 0x00007ffff7ae0ee7 in SDL_InitSubSystem_REAL (flags=16416) at /home/vlab/abs/sdl2/src/SDL2-2.0.4/src/SDL.c:173 #14 0x0000000000400b24 in main (argc=2, argv=0x7fffffffebb8) at vplay-init.cpp:13 (gdb)

f94bd057

2016-10-13T04:53:01

Fixed bug 3451 - Raspberry Pi Raspbian SDL_assert triggered sometimes at RPI_WarpMouseGlobal Eric wing Sometimes an SDL_assert triggers at RPI_WarpMouseGlobal src/video/raspberry/SDL_rpimouse.c:232 'update'. It doesn't always reproduce, but it seems to happen when you really bog down the system and the event loop can't update for awhile. The first time I hit this, I wasn't even using the mouse. I don't call any warp mouse functions either. I can usually reproduce with a simple program that runs an expensive blocking CPU series of functions which blocks the main loop until complete (can be up to 10 seconds). Sometimes this assertion gets triggered after that. I'm not sure if they are related or coincidental. Disabling the SDL_asserts when compiling SDL will avoid this problem. I actually haven't seen any problems with the mouse when I do this. On a Raspberry Pi 2 running Raspbian Jessie.

c490b54e

2016-10-13T04:01:25

Fixed black screen on Steam Link

3f167a5a

2016-10-13T02:19:23

Added support for the PS4 Slim controller, model CUH-ZCT2U

cb7b823c

2016-10-13T02:09:37

Fixed black screen on Steam Link

741aaf4c

2016-10-12T22:34:54

Added a note on how to allow non-root applications to increase their thread priority on Linux

62310c6b

2016-10-12T22:25:19

Work-around for a hang when USB devices are unplugged, contributed by James Zipperer

14e7da75

2016-10-12T19:50:16

Backed out change 7d3df1df4e91 which was: Fixed bug 3320 - SDL_windows_main.c defines both console application entry points With that change only the wmain() entry point was defined, and applications that linked with main() would no longer build.

4c9f3139

2016-10-12T18:57:12

Added note for David Carlier's work on OpenBSD

47590424

2016-10-12T18:46:17

Build SDL as universal binary

3a77b42d

2016-10-12T18:45:56

Fixed build warning

f6bcfa01

2016-10-12T23:38:31

X11: Fixed compile warning about unused variable.

ed80cfd9

2016-10-12T23:36:49

Removed empty statements in tests.

9d0e0749

2016-10-12T23:36:29

Linux: Removed redundant function call.

cfb24c76

2016-10-12T00:01:17

Fixed pointer signedness warning

3b3dd9af

2016-10-11T23:56:52

Updated WhatsNew with 2.0.5 changes

f5c2bf12

2016-10-11T23:21:41

Fixed comment for new pixel formats

36e40d30

2016-10-11T23:19:05

Fixed bug 2923 - Add SDL_PIXELFORMAT_RGBA32 for byte-wise 32bit RGBA data Daniel Gibson Ok, I followed the simple approach of just making SDL_PIXELFORMAT_RGBA32 an alias of SDL_PIXELFORMAT_RGBA8888/SDL_PIXELFORMAT_ABGR8888, depending on endianess. And I did the same for SDL_PIXELFORMAT_ARGB32, .._BGRA, .._ABGR. SDL_GetPixelFormatName() will of course return SDL_PIXELFORMAT_RGBA8888 (or SDL_PIXELFORMAT_ABGR8888) instead of SDL_PIXELFORMAT_RGBA32, but as long as that's mentioned in the docs it shouldn't be a problem.

8a0704d1

2016-10-11T16:36:40

cmake: Now generates Wayland protocol source bits like the configure script. Fixes Bugzilla #3430.

564c790f

2016-10-11T17:31:29

Fixed a memory leak in function GL_RenderReadPixels

fed9b604

2016-10-10T23:26:26

Use SDL C runtime strlen()

ca42373f

2016-10-10T15:29:18

alsa: more tapdancing to enumerate physical hardware devices. Apparently some systems see "hw:", some see "default:" and some see "sysdefault:" (and maybe others!). My workstation sees both "hw:" and "sysdefault:" ... Try to find a prefix we like and prioritize the prefixes we (think) we want most. If everything else fails, if there's a "default" (not a prefix) device name, list that by itself so the user gets _something_ here. If we can't find a prefix we like _and_ there's no "default" device, report no hardware found at all.

aae28e3e

2016-10-10T18:28:05

Fixed bug 3096 - SDL_BlitSurface with overlapping source and destination

9db5e9aa

2016-10-10T02:58:29

Made #if defined(X) consistent

6dedbc43

2016-10-10T02:58:12

Make sure we have iconv.h before building with it

367a6a3d

2016-10-09T20:31:32

Fixed compiling of three test programs with C++.

f9b15a94

2016-10-09T20:31:04

Linux: Fixed mixed up scancodes.

f662f680

2016-10-09T20:30:49

iOS: Updated demo README.

42f85aa2

2016-10-08T11:30:07

Fixed building and using fcitx IME support on Linux

27d4f099

2016-10-07T23:40:44

Implemented SDL_GetHintBoolean() to make it easier to check boolean hints

52ae92ea

2016-10-07T19:08:22

ALSA_snd_pcm_drop() can hang on some systems (Steam Link) so don't use that when shutting down the ALSA audio driver.

808c75d1

2016-10-07T18:57:40

Fixed bug 2824 - Add Fcitx Input Method Support Weitian Leung Just moved ibus direct call to SDL_IME_* related functions, and adds fcitx IME support (uses DBus, too), enable with env: SDL_IM_MODULE=fcitx (ibus still the default one)

89abbbfe

2016-10-07T18:24:34

Fixed bug 3438 - SDL_GameControllerEventWatcher: Log on event with value >= k_nMaxReverseEntries

eea76fc1

2016-10-07T18:11:03

Fixed bug 3063 - Wayland: SDL resizes EGL surface to 0x0. x414e54 Wayland will sometimes send empty resize events (0 width and 0 height) to the client. I have not worked out the exact conditions a client would receive these but I can assume it might be if the window is offscreen or not mapped yet. This causes issues with some SDL clients as they receive the 0x0 event and unexpected resize event or might not request to resize back to the correct size. As per the wl_shell Wayland spec configure events are only a suggestion and the client is free to ignore or pick a different size (this is how min/max and fixed aspect ratio is supped to be implemented). A patch is attached but is just the first iteration and I will fix any issues such as checking for FULLSCREEN/MAXIMIZED or RESIZABLE flags unless someone else fixes this first. I have update to take into account non resizable and fullscreen windows. Also adding in maximize/restore and title functions for Wayland.

62b9e1c7

2016-10-07T18:09:09

Fixed bug 3061 - Selecting the dummy video driver on Mac OS X results in an error Darren Kulp The dummy video driver is not available on Mac OS X if SDL_VIDEO_OPENGL is set at library compilation time. In src/video/SDL_video.c, there is a compile-time check in SDL_CreateWindow() for (SDL_VIDEO_OPENGL && __MACOSX__). When it succeeds, SDL_WINDOW_OPENGL is always requested. Since the dummy video driver does not supply an OpenGL implementation, the error "No OpenGL support in video driver" is supplied to the user, and SDL_CreateWindow() is exited early.

abefe785

2016-10-07T18:03:08

Fixed bug 3043 - fix alsa configury and cmake checks Ozkan Sezer SDL's alsa uses snd_pcm_recover() which has been available only since alsa-lib-1.0.11.

9c483655

2016-10-07T18:00:30

Fixed bug 3029 - software renderer cuts off edges when rotate-blitting with a multiple of 90 degrees Adam M. When doing a rotated texture copy with the software renderer, where the angle is a multiple of 90 degrees, one or two edges of the image get cut off. This is because of the following line in sw_rotate.c: if ((unsigned)dx < (unsigned)sw && (unsigned)dy < (unsigned)sh) { which is effectively saying: if (dx >= 0 && dx < src->w-1 && dy >= 0 && dy < src->h-1) { As a result, it doesn't process pixels in the right column or bottom row of the source image (except when they're accessed as part of the bilinear filtering for nearby pixels). This causes it to look like the edges are cut off, and it's especially obvious with an exact multiple of 90 degrees.

5c2320f1

2016-10-07T17:58:02

Fixed bug 3022 - SDL_UnlockMutex(SDL_EventQ.lock) in SDL_PeepEvents can cause error when lock is null

d3cbc664

2016-10-07T17:49:33

Fixed bug 2983 - Update Android.readme to include Tegra Graphics Debugger compatibility tip Michael Labb? NVidia has released some pretty nice Tegra profiling tools for their Android devices. The NVidia Tegra Graphics Debugger works by providing an interposer library that intercepts ES2 and EGL calls. You must link against these libraries. Unfortunately, this quietly fails with SDL2 because libEGL and libGLES2 are dynamically loaded with dlopen(). NVidia offers a secondary approach to using the Tegra Graphics Debugger: root your device and install a global interposer library. Almost no devs will try this first if they don?t have a rooted device. I propose an update to the Android readme that explains why the static linking approach recommended by NVidia doesn?t work.

104c9541

2016-10-07T17:46:58

Converted README documentation to DOS text format

bf076c22

2016-10-07T17:30:21

Fixed bug 2957 - De-reference rz_src without NULL check in SDLgfx_rotateSurface function Nitz In function SDLgfx_rotateSurface: rz_dst = SDL_CreateRGBSurface(SDL_SWSURFACE, dstwidth, dstheight + GUARD_ROWS, rz_src->format->Rmask, rz_src->format->Gmask, rz_src->format->Bmask, rz_src->format->Amask); Here rz_src get De-referenced without NULL check, which is risky.

8b64a78d

2016-10-07T17:26:25

Fixed bug 2956 - De-reference videodata without NULL check in X11_DispatchEvent(_THIS) function

93ff12ce

2016-10-07T17:23:20

Fixed bug 2952 - SDL_MixAudioFormat does not support audio format AUDIO_U16LSB/AUDIO_U16MSB Simon Sandstr?m As stated in Summary. The switch statement will execute the default case and set a SDL error message: "SDL_MixAudio(): unknown audio format". There are atleast two more problems here: 1. SDL_MixAudioFormat does not notify the user that an error has occured and that a SDL error message was set. It took me awhile to understand why I couldn't mix down the volume on my AUDIO_U16LSB formatted audio stream.. until I started digging in the SDL source code. 2. The error message is incorrect, it should read: "SDL_MixAudioFormat(): unknown audio format".

d2676c29

2016-10-07T17:04:58

Fixed bug 2924 - SDL_CreateRGBSurface[From] versions that take SDL_PIXELFORMAT enum Daniel Gibson Currently, SDL_CreateRGBSurface() and SDL_CreateRGBSurfaceFrom() take Uint32 masks for RGBA to "describe" the Pixelformat of the surface. Internally those value are only used to map to one of the SDL_PIXELFORMAT_* enum values that are used for further processing. I think it would be both handy and more efficient to be able to specify SDL_PIXELFORMAT_* yourself without using SDL_PixelFormatEnumToMasks() to create masks first, so I implemented functions that do that: SDL_CreateRGBSurfaceWithFormat() and SDL_CreateRGBSurfaceWithFormatFrom() which are like the versions without "WithFormat" but instead of taking 4 Uint32s for R/G/B/A masks, they take one for a SDL_PIXELFORMAT_* enum value. Together with https://bugzilla.libsdl.org/show_bug.cgi?id=2923 creating a SDL_Surface* from RGBA data (e.g. from stb_image) is as easy as surf = SDL_SDL_CreateRGBSurfaceWithFormat(0, w, h, bppToUse*8, SDL_PIXELFORMAT_RGBA32);

73f2c541

2016-10-07T16:44:42

Fixed bug 2885 - SDL_stdinc.h doesn't need to include iconv.h Ryan C. Gordon We still include iconv.h in SDL_stdinc.h, probably because this header might have referenced the native iconv functions and types directly. Since these are hidden behind a stable ABI now and never just a #define for the system iconv, we shouldn't need this header included from a public SDL header anymore, slowing down external apps compiles and pulling tons of stuff into the namespace.

7d2108ce

2016-10-07T19:39:43

audio: Backed out the audio-thread detaching changes. It added a ton of complexity. A simpler solution might arise at some point though.

24df68ea

2016-10-07T16:32:58

Fixed bug 2833 - Access Violation on SDL_PollEvent after init, delay and quit of joystick subsystem Jan Klass Not sure if this is limited to the joystick subsystem, but I created a minimal program for reproducibility, which is attached. The issue occurs with my gamepad Razer Onza (an xbox-style gamepad) plugged in. On initialization, the gamepad is being recognized. After quitting the subsystem, the poll will receive the joystick added event, which it instantly handles itself, calling SDL_SYS_JoystickDetect again, which this time calls IDirectInput8_EnumDevices with dinput = NULL (after it was released on quit). This seems to lead to an access violation within said function, which I have no source for.

dac38928

2016-10-07T16:19:50

Fixed bug 2832 - Inverted arrow-key navigation in MessageBox Jan Hellwig On Windows, you are able to navigate between the buttons on a MessageBox that was created using SDL_ShowMessageBox using the arrow keys. However, if you press the left arrow key, the selection jumps to the button on the right of the currently selected one (and vice versa). This can be fixed by reversing the order in which the buttons are added to the dialog. The attached patch files fixes this problem. However the first press of an arrow key leads to the selection of the leftmost or rightmost button on the MessageBox, not to the selection of the button left/right of the one that is selected by default.

8bc5c57d

2016-10-07T16:13:37

Fixed recentering triggers when the application doesn't have focus

72164985

2016-10-07T16:04:15

Fixed bug 2823 - Release events for triggers receive wrong centered value Ryochan7 I have been using SDL 2 for a little project that I have been developing for a while. My project is called antimicro and it takes gamepad input and then translates gamepad events into keyboard and mouse events. SDL is used to read the input from an XInput gamepad and it works great for the most part. However, there is one glaring problem that I have encountered. When a device is unplugged and SDL sends the centered value release events for all axes, buttons, and hats, SDL does not use the proper centered value for the triggers. It pushes an SDL_JOYAXISMOTION event onto the queue with a value of 0 for all axes. That value is converted to around 16,000 for a Game Controller. That value is incorrect for triggers and, in my program, that causes any bindings that are assigned to the triggers to get activated. With most profiles, that will typically mean that a mouse right click and left click will be activated before the device is finally seen as removed and then those bindings are released by antimicro.

f674f231

2016-10-07T15:21:19

Fixed bug 2808 - Fix SDL reporting wrong window size on resume Jonas Kulla At startup time, the single android window is assigned a "windowed" (window->windowed.{w,h}) size based on the current orientation of the mobile device; this size is never updated throughout the lifetime of the app. This becomes problematic when the app is paused and then resumed in an orientation that it did not start up in. Eventually, 'SDL_OnWindowRestored()' is called, which calls 'SDL_UpdateFullscreenMode()'. This function is very problematic because it is written with a desktop monitor in mind: it tries to find a matching display mode for the windowed size, doesn't find any, and finally applies the windowed size as the fullscreen one. In the end, the windowed size is reported in a RESIZED event, which doesn't correspond to the actual surface size. To see this in action: Start an orientation aware SDL app in eg. portrait mode, suspend the app, put the device into landscape orientation and resume the app. It will erroneously render in portrait mode (until the device is rotated again).

5c1ab403

2016-10-07T15:08:37

Applied Ubuntu patch bug_822210_fix_sdl2-config.cmake_whitespace.patch

f6a280ab

2016-10-07T15:13:46

audio: Don't trust audio drivers to drain pending audio. This tends to be a frequent spot where drivers hang, and the waits were often unreliable in any case. Instead, our audio thread now alerts the driver that we're done streaming audio (which currently XAudio2 uses to alert the system not to warn about the impending underflow) and then SDL_Delay()'s for a duration that's reasonable to drain the DMA buffers before closing the device.

551cdc8d

2016-10-07T14:42:24

audio: better way to calculate buffer drain wait times.

76f48acf

2016-10-07T14:35:25

audio: threading and device hang improvements. This tries to make SDL robust against device drivers that have hung up, apps don't freeze in catastrophic (but not necessarily uncommon) conditions. Now we detach the audio thread and let it clean up and don't care if it never actually runs to completion.

3b0c7936

2016-10-07T11:18:55

Some systems include both "default:" and "hw:" for the same usb device

8e199461

2016-10-06T06:08:16

fix for finding ALSA hotplug devices on Steam Link James Zipperer The device names show up as "default:", not "hw:"

9257b72d

2016-10-05T00:12:16

Backed out a very unsafe change that was trying to prevent audio hang at quit. Ryan and I have ideas on a better way to handle this.

46f44f66

2016-10-04T14:25:31

Fixed potential buffer overflow in SDL_vsnprintf() (thanks, Taylor!). Fixes Bugzilla #3441. "When using internal SDL_vsnprintf(), and source string length is greater than destination, the final NULL char will be written beyond destination size. Primary issue that is SDL_strlcpy returns length of source string (SDL_PrintString()), not how much is written to destination. The destination ptr is then incremented by this length before the sanity check is done. Destination string is properly terminated, but an extra NULL char will be written beyond destination buffer length. Patch used internally is attached which fixes primary issue with SDL_strlcpy() in SDL_PrintString() and adjusts sanity checks to increment destination ptr safely."

bac61096

2016-10-04T06:48:07

ensure SDL_AUDIODEVICEREMOVED gets sent when hotplug removes a device James Zipperer The problem I was seeing was that the the ALSA hotplug thread would call SDL_RemoveAudioDevice, but my application code was not seeing an SDL_AUDIODEVICEREMOVED event to go along with it. To fix it, I added some code into SDL_RemoveAudioDevice to call SDL_OpenedAudioDeviceDisconnected on the corresponding open audio device. There didn't appear to be a way to cross reference the handle that SDL_RemoveAudioDevice gets and the SDL_AudioDevice pointer that SDL_OpenedAudioDeviceDisconnected needs, so I ended up adding a void *handle field to struct SDL_AudioDevice so that I could do the cross reference. Is there some other way beside adding a void *handle field to the struct to get the proper information for SDL_OpenedAudioDeviceDisconnected?

69cf1703

2016-10-04T06:46:46

fix deadlock on close device James Zipperer snd_pcm_drain doesn't always drain when you unplug a usb device. Use snd_pcm_drop instead

2558c9c8

2016-10-04T06:45:28

fix audio deadlock James Zipperer Close the audio device before waiting for the audio thread to complete, which fixes a situation where the audio thread never completes Add an additional check in the audio thread to see if the device is enabled and bail out if the device is no longer enabled

56c88c45

2016-10-04T04:08:02

Modified the custom cursor test to be able to load BMP files as cursors

a21a227a

2016-10-04T03:50:28

Fixed bug 3021 - HapticOpenFromJoystick() problems Joe Thompson With Direct Input device (MOMO Steering Wheel w/FF) with SDL 2.0.3, SDL_HapticOpenFromJoystick() would fail. (Can't set exclusive mode) Now with 2.0.4 rc1, SDL_HapticOpenFromJoystick() succeeds but the the returned SDL_Haptic* cannot be used. Calls to SDL_HapticNewEffect() fail with "Haptic error Unable to create effect" If SDL_HapticOpen() is used instead of HapticOpenFromJoystick(), the device is usable. Calls to HapticNewEffect() succeed with the exact same parameters as the previous failing call. I have attached a proposed patch for this issue. When using SDL_HapticOpenFromJoystick(), the original code did not (re)enumerate the axes. This returned a new haptic device with 0 axes. Later, when a new effect is created, SDL_SYS_SetDirection() would set the flags to include DIEFF_SPHERICAL, regardless of what the caller actually set. (see Line 566 in SDL_dinputhaptic.c). This would cause the SDL_HapticNewEffect() to fail (or interpret the coordinates incorreclty.) The patch moves the call to IDirectInputDevice8_EnumObjects() outside of the if() block so that the axes are (re)enumerated for the new haptic device. Note: For steering wheels it is common for the joystick to have multiple axes (ie steering, throttle, brake), but the haptic portion of the joystick usually only applies to steering.

1051dceb

2016-10-04T03:42:42

Fixed compiler warning about missing field initializers

5d5127c4

2016-10-04T03:38:39

Fixed compiler warning - this should have been a const char pointer

351adf15

2016-10-04T02:11:52

Fixed bug 2157 - Caps Lock key produces key down & key up events while key is still pressed. Tim McDaniel Using checkkeys test app: * Press and hold Caps Lock key. * checkkeys reports a CapsLock key pressed event and a CapsLock key released event. * Release Caps Lock key. * checkkeys reports no further events. This patch fixes OSX Caps Lock up/down event detection by installing a HID callback.

d9e3972a

2016-10-03T15:31:11

Fix invalid read from poor setlocale usage.

34eebfba

2016-10-03T03:42:10

Fixed setting the version info in the shared library when using CMake Ray Molenkamp When building sdl as shared lib, the version info is lacking in the final binary. CMake gathers the right resource files into ${VERSION_SOURCES} but then doesn't do anything with them.

752931d8

2016-10-03T11:35:34

Improve X11 key handling when XKB isn't available + add xvnc scancodes. Based on a patch by Bill Lash (see bug 3094).

05ca784e

2016-10-02T22:32:50

Android: Fixed compile error.

67bf5cac

2016-10-02T22:32:35

Fixed wrong pixel format if reading pixels from OpenGL renderer.

f8aa4291

2016-10-02T22:32:18

Added brackets to function names in header comments so that doxygen links them.

969c3167

2016-10-01T18:49:15

Fixed MinGW-w64 build warnings in SDL_render_d3d11.c Some of these were legitimate bugs, including: - a malformed SDL_snprintf call - a probably-invalid enum comparison

702d9348

2016-10-01T15:23:43

Added SDL prefix to local IID constants

8500de8f

2016-10-01T19:16:46

Fix tabs -> spaces

4e6f2199

2016-10-01T15:14:48

Fixed bug 3065 - Screen is flickering during closing on-screen keyboard on Android Deve When I'm trying to close on-screen keyboard using SDL_StopTextInput() function by touching the screen (SDL_FINGERUP or SDL_FINGERDOWN event), the screen is flickering. It is white for a while. Note that it usually works without problems when I use phone's "back" button. I noticed flickering occasionally too, but not that often. Philipp Wiesemann The attached patch maybe fixes the flicker but not the actual fault causing it.

f0539aa2

2016-10-01T19:12:58

Fix bug 3436 - SDL_RaiseWindow not working on windows

c9be93c6

2016-10-01T15:11:18

Fixed bug 3078 - cmake: fix sdl2.m4 install location on cross hosts Timo Gurr On cross hosts running autotools for SDL2_gfx-1.0.1 fails to find sdl2.m4: eautoreconf: running in /var/tmp/paludis/build/media-libs-SDL2_gfx-1.0.1/work/SDL2_gfx-1.0.1 ... aclocal aclocal-1.13: warning: autoconf input should be named 'configure.ac', not 'configure.in' configure.in:128: warning: macro 'AM_PATH_SDL2' not found in library libtoolize --copy --force --automake aclocal aclocal-1.13: warning: autoconf input should be named 'configure.ac', not 'configure.in' configure.in:128: warning: macro 'AM_PATH_SDL2' not found in library autoconf configure.in:128: error: possibly undefined macro: AM_PATH_SDL2 If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation. * Failed Running autoconf ! SDL2 installs it to /usr/x86_64-pc-linux-gnu/share/aclocal on cross hosts, attached patch makes use of CMAKE_INSTALL_FULL_DATAROOTDIR to support correctly installing to the arch independent location /usr/share/aclocal.

3c8a2698

2016-10-01T18:10:50

WinRT: build fix in joystick code

7851eb08

2016-10-01T18:10:15

Fixed bug 3437 - build error for WinRT/UWP .dlls, caused by fix for SDL bug 3336 This fix has been tested with both MinGW-w64, and Visual C++ 2012-2015.

ac7d1174

2016-10-01T15:04:13

Fixed build on older Raspberry Pi environments

a0d3e0d6

2016-10-01T14:56:53

Fixed warning and code style in SDL_evdev.c

d2c8c509

2016-10-01T14:54:05

Fixed build for X11

7b34f47e

2016-10-01T14:50:22

Fixed windows build

fa0f4176

2016-10-01T14:48:18

Fixed build warnings and errors

fae5d0ea

2016-10-01T14:34:52

Fixed bug 3107 OSX - Process events in SDLApplication to fix integration with CEF. John Wordsworth While attempting to integrate CEF (Browser) into an SDL application, we noticed that there were problems on OS X where approximately 50% of the input events were essentially being lost - even when we were using off-screen rendering in CEF and passing through input events manually. It appears that this problem has been around for a while (see: http://www.magpcss.org/ceforum/viewtopic.php?f=6&t=11141). Please consider the following patch that fixes this issue. Instead of processing events directly after calling [NSApp nextEventMatchingMask:...] we now pass these events down to NSApp, for processing by an overloaded sendEvent: method. Chromium also forwards events to NSApp in the same way, which means we don't miss events, even if they were originally dequeued by CEF.

c8cfccc2

2016-10-01T14:31:00

Fixed bug 3116 - renderer->hidden in SDL_RenderCopy(Ex) Daniel Seems like check of the visibility of renderer (renderer->hidden) is missing in SDL_RenderCopyEx. In SDL_RenderCopy it should be done much earlier (after checking support for RenderCopyEx, line 1750).

359f59ae

2016-10-01T14:22:10

Fixed bug 3130 - Spacebar not responding Alex Baines Make sure group is valid before passing it to XkbKeysymToKeycode.

555e6c96

2016-10-01T14:18:29

Fix SDL not resizing window when Android screen resolution changes

0250eb3c

2016-10-01T14:16:04

Fixed bug 3134 - CalculateXRandRRefreshRate() returns incorrect refresh rate due to floating point truncation. Michael In SDL_x11modes.c the CalculateXRandRRefreshRate() function performs integer math on values that may return fractional results. This causes a value that would be calculated as 59.99972... to be returned as 59. In Linux the xrandr command returns 60Hz for this particular display mode yet SDL returns 59Hz. I suggest this function be updated to correctly round the result of the calculation instead of truncating the result.

64180d22

2016-10-01T14:05:35

Fixed bug 3138 - c_dfDIJoystick2 already defined in dinput8.lib Machiel van Hooren In SDL_dxjoystick.c line 349 there is a constant c_dfDIJoystick2. However, this constant is aparently also defined in dinput8.lib. I encountered a linking error when statically linking to SDL: SDL2_static.lib(SDL_dxjoystick.obj) : error LNK2005: _c_dfDIJoystick2 already defined in dinput8.lib My application is also linking to dinput8.lib because we rolled our own joystick input and are not using the joystick functionality from SDL.

da6197c5

2016-10-01T13:59:59

Fixed 3149 - Mouse Pointer Raspberry Pi corrupt when moving over screen edges Patrick Gutlich The mouse cursor gets corrupted when the mouse moves over the screen edges (right and bottom) a weird type of scaling seems to occur and you end up with a blank square.

kc3-lang/SDL

Log