kmx git

Commit	Date	Message
6bd4c717	2020-12-17T21:41:23	Fixed bug 5402 - ARM support little update proposal David Carlier No fix but mostly an update for ARM architecture.
10625f9d	2020-12-17T23:50:00	SDL_windowsmessagebox.c: go back to hg rev 14458 state. encountering a NULL caption in AddDialogString() is intended, i.e. AddDialogStaticIcon() sends it as NULL on purpose.
4d6eb305	2020-12-17T23:28:20	SDL_windowsmessagebox.c (AddDialogControl): add back NULL caption check. because AddDialogStaticIcon() sends a NULL caption -- fixes bug #5401.
90456670	2020-12-17T14:11:00	more "'for' loop initial declarations are only allowed in C99 mode" fixes
ed4fcb2c	2020-12-16T03:24:10	kmsdrm_legacy build fixes: - add missing '_LEGACY' to symbol names - perform missing 2.0.14 portage - fix 'for' loop initial declarations are only allowed in C99 mode errors
f484abbd	2020-12-15T14:57:51	Added Android mapping for the Xbox One Series X controller over Bluetooth
14f97734	2020-12-15T14:57:47	Fixed whitespace
9940e710	2020-12-16T00:10:30	Import two post-2.0.12 fixes to kmsdrm_legacy: Fix build breakage without EGL: https://hg.libsdl.org/SDL/rev/f2606fe53654e305ab9badb821d9d3afb7f92f49 Fix KMSDRM_CreateWindow segfault when starting L?VE2D engine (bug 5199) https://hg.libsdl.org/SDL/rev/d2e69a78939463d9ff9448a5f4efd1e208bb97b0
f8839289	2020-12-15T12:22:48	Potential fix for bug 5393 - KMSDRM: using atomic mode setting breaks GPU compatibility Substring I was trying the KMSDRM video backend with some very simple programs that were working ok on 2.0.12. The same code won?t work on the current dev branch and I get: DEBUG: check_modesetting: probing ?/dev/dri/card0? DEBUG: /dev/dri/card0 connector, encoder and CRTC counts are: 4 5 6 DEBUG: check_modesetting: probing ?/dev/dri/card0? DEBUG: /dev/dri/card0 connector, encoder and CRTC counts are: 4 5 6 DEBUG: KMSDRM_VideoInit() DEBUG: Opening device /dev/dri/card0 DEBUG: Opened DRM FD (3) DEBUG: no atomic modesetting support. DEBUG: Video subsystem has not been initialized INFO: Using SDL video driver: (null) DEBUG: Video subsystem has not been initialized After carefully checking, the radeon driver doesn?t support atomic modesetting. That?s not the only problem : the same happens with the amdgpu driver if we disable Display Core (kernel parameter amdgpu.dc=0, which is required to get analogue outputs working). This is a major regression in the KMSDRM driver. Using atomic mode setting is great, but having no fallback to the "standard KMS" is bad.
637d425e	2020-12-15T00:11:10	whitespace.
e65e4fd3	2020-12-14T09:48:51	Fixed detecting the guide button on Xbox One S controllers over Bluetooth on Linux
f1c7cc71	2020-12-14T12:36:04	winrt: Buildfix for older UWP SDKs
bfffa275	2020-12-14T09:23:53	Fixed bug 5397 - Fcitx input is truncated sowfelicity Split the long text input event into multiple shorten text input event.
8795ca70	2020-12-14T09:15:47	Fixed bug 5241 - SDL on Linux needs a way to turn deadzones off pj5085 I added some printf to verify the math being done. Of the three joysticks I have, it works correctly for at least two, and seems to work correctly for the third. I say "seems to" because, for the third joystick, the values never go through the AxisCorrect function, and thus never hit my printf statements, even though they did in the version I wrote my patch against. I'm not sure what's going on there, but it at least seems to be working correctly in as much as I can tell. I note this result in particular, for an SNES Gamepad (min=0, max=255): Joystick value 0 becomes -32768 Joystick value 127 becomes 0 Joystick value 255 becomes 32767 Without the code that forces a zero point, the 127 input value would become -129, so I think you see why I added that code to turn it into zero. However, I think Kai Krakow has a point about how SDL shouldn't assume that there should be a center. Obviously in the majority of cases there actually should be a center, and the code that turns that 127 into an actual 0 is creating only a 0.2% error over 0.4% of this joystick's range. However, what if there is an axis that is some kind of special control, like a 4-position switch, and, for whatever reason, the joystick reports it as an axis with 4 possible values, 0 to 3? In that case, mutilating the two center values to the same value is much more of an error and and turns that 4-position switch into a 3-position switch. If any joystick does this with a 2-position switch, then this code would render that control entirely useless as it would report the same value with the switch in either position. Obviously the code could require that there be at least N possible values, to guess whether something is a proper axis or just some kind of switch, but the choice of N would be arbitrary and that's ugly. I guess the real problem here is that my gamepad is just kind of broken. It should be reporting a range of -1 to +1 since that's what it actually does. Also, as Kai Krakow points out, it's probably not SDL's place to fix broken hardware. I'll add that, if SDL does fix broken hardware, it should probably actually know that it's broken rather than be merely guessing that it is. So, to the extent that SDL is able to do stuff like this, perhaps it's something better left for the user to configure in some kind of config file.
169cfe5a	2020-12-14T11:52:09	winrt: EffectiveLocation still needs an ifdef, IsApiContractPresent is for runtime
3c2757ff	2020-12-13T18:25:02	windows SDL_LoadObject: fix warning after commit 2ff650230d96
15cbddf4	2020-12-13T18:00:20	linux/SDL_threadprio.c: fix build on older systems: SCHED_RESET_ON_FORK is in kernel >= 2.6.32.
3b92933a	2020-12-13T17:37:50	SDL_LoadObject (windows, os/2): prevent crash if dll name is NULL.
b6e63625	2020-12-13T15:32:24	fix bug #5395: handle old systems where inotify_init1 is not available
ee85a41a	2020-12-13T02:10:46	Fixed compile warning
706f6375	2020-12-13T01:58:05	Fixed build for platforms with only libusb hidapi implementations
80e5c689	2020-12-13T01:20:38	Fixed the PS5 controller not disconnecting when powered off
db0a2025	2020-12-12T23:48:02	Fixed bug 5241 - SDL on Linux needs a way to turn deadzones off pj5085 It occurred to me that my simple patch that comments out a few lines of code does not correctly remove the dead zone since the calculation presumably assumes the dead zone has been cut out of the range. Then, while looking into how to make it output the correct range of values, I realized SDL wasn't returning the correct range of values to begin with. This line of code was already present: printf("Values = { %d, %d, %d, %d, %d }\n", absinfo.value, absinfo.minimum, absinfo.maximum, absinfo.fuzz, absinfo.flat); For my joystick this yeilds: Values = { 0, -127, 127, 0, 15 } Then this code calculates the coefficients: In SDL1: joystick->hwdata->abs_correct[i].coef[0] = (absinfo.maximum + absinfo.minimum) / 2 - absinfo.flat; joystick->hwdata->abs_correct[i].coef[1] = (absinfo.maximum + absinfo.minimum) / 2 + absinfo.flat; t = ((absinfo.maximum - absinfo.minimum) / 2 - 2 * absinfo.flat); if ( t != 0 ) { joystick->hwdata->abs_correct[i].coef[2] = (1 << 29) / t; } else { joystick->hwdata->abs_correct[i].coef[2] = 0; } In SDL2: joystick->hwdata->abs_correct[i].coef[0] = (absinfo.maximum + absinfo.minimum) - 2 * absinfo.flat; joystick->hwdata->abs_correct[i].coef[1] = (absinfo.maximum + absinfo.minimum) + 2 * absinfo.flat; t = ((absinfo.maximum - absinfo.minimum) - 4 * absinfo.flat); if (t != 0) { joystick->hwdata->abs_correct[i].coef[2] = (1 << 28) / t; } else { joystick->hwdata->abs_correct[i].coef[2] = 0; } Neither calculates the correct coefficients for the code in the AxisCorrect function. In SDL1: if ( value > correct->coef[0] ) { if ( value < correct->coef[1] ) { return 0; } value -= correct->coef[1]; } else { value -= correct->coef[0]; } value = correct->coef[2]; value >>= 14; In SDL2: value = 2; if (value > correct->coef[0]) { if (value < correct->coef[1]) { return 0; } value -= correct->coef[1]; } else { value -= correct->coef[0]; } In SDL1, the calculated coefficients are coef[0]=15, coef[1]=-15 and coef[2]=5534751. So with a full-scale input of 127, it calculates an output value of 37835, which is considerably out of range. In SDL2, the calculated coefficients are coef[0]=30, coef[1]=-30, and coef[2]=1383687. So with a full-scale input of 127, it calculates the same output value of 37835. I tested it with the 3 joysticks I have, and it produces out-of-range values for all of them. Anyway, since dead zones are garbage, I just deleted all of that junk and wrote some code that takes the absinfo.minimum and absinfo.maximum values and uses them to scale the axis range to -32767 through +32767. I also made it detect when a range doesn't have an integer center point, e.g. the center of -128 to + 127 is -0.5. In such cases, if either value to the side of the center is provided, it zeros it, but it otherwise doesn't implement any kind of dead zone. This seemed important with my gamepad which provides only the values of 0, 127, and 255, since without this hack it would never be centered. Also, the previous minimum output value was -32768, but as that creates an output range that has no true center, I changed the minimum value to -32767. I tested it with the 3 joystick devices I have and it seems to create correct values for all of them.
0ccb3afd	2020-12-12T22:33:11	Fixed polling values after SYN_DROPPED event
9ee0e888	2020-12-12T22:11:00	Whoops, make the hint actually default to false
13a4caf1	2020-12-12T22:08:02	Fixed bug 4286 - Joystick subsystem causes "not responding" when app is in the background Added a hint to control whether a separate thread should be used for joystick events. This is off by default because dispatching messages in other threads appears to cause problems on some versions of Windows.
5c212cb0	2020-12-10T12:24:24	remove a few stale NULL message/title checks after commit e2b729b1756a top-level guarantees non-NULL message / title passed in messageboxdata
f1cab8ae	2020-12-10T11:20:56	fix bug #5253: handle NULL title or message fields in SDL_MessageBoxData - SDL_video.c (SDL_ShowMessageBox): replace messageboxdata, set title or message field to "" if either of them is NULL. - SDL_video.c (SDL_ShowSimpleMessageBox): set title or message to "" if either of them is NULL for EMSCRIPTEN builds. - SDL_bmessagebox.cc: add empty string check along with NULL check for title and message fields. - SDL_windowsmessagebox.c (AddDialogString): remove NULL string check - SDL_windowsmessagebox.c (AddDialogControl): add empty string check along with the NULL check. - SDL_x11messagebox.c: revert commit 677c4cd68069 - SDL_os2messagebox.c: revert commit 2c2a489d76e7 - test/testmessage.c: Add NULL title and NULL message tests.
797a6910	2020-12-09T20:28:51	Fixed bug 5375 - WGI: Fix HSTRING memory leak. Joel Linn TLDR; https://godbolt.org/z/43fd8G Let's deduce this from C++ reference code: https://docs.microsoft.com/en-us/cpp/cppcx/wrl/how-to-activate-and-use-a-windows-runtime-component-using-wrl?view=msvc-160 At the bottom of the page there is this snippet: ``` int wmain() { /* ... more code ... */ // Get the domain part of the URI. HString domainName; hr = uri->get_Domain(domainName.GetAddressOf()); if (FAILED(hr)) { return PrintError(__LINE__, hr); } // Print the domain name and return. wprintf_s(L"Domain name: %s\n", domainName.GetRawBuffer(nullptr)); // All smart pointers and RAII objects go out of scope here. } ``` `HString` is defined in `corewrappers.h` and the call chain for the destructor is: `~HString() -> Release() -> ::WindowsDeleteString()` QED
a77a0715	2020-12-09T07:50:15	Disabled raw input debug output
d46dd103	2020-12-09T07:49:07	Fixed typo in Vulkan load logic
7fa5e95b	2020-12-09T07:23:47	Fixed bug 5213 - Add support to metal in iOS/tvOS simulator Vincent Hamm Xcode11 and ios13 added support for metal simulator. Here is a quick and dirty patch to enable it. Pretty early and only tested on a few samples for now. Required mostly to enable metal support on correct version of ios, generate simulator compatible shaders and enforce buffer alignments on simulator (same as osx).
cb361896	2020-12-09T07:16:22	Fixed bug 5235 - All internal sources should include SDL_assert.h Ryan C. Gordon We should really stick this in SDL_internal.h or something so it's always available.
88cb4962	2020-12-09T06:42:31	Fixed bug 5291 - SDL_SetRenderTarget unnecessarily changes target when current target is the native texture of the passed in texture
f2fff217	2020-12-09T06:24:40	Fixed bug 5374 - WGI: Use fast-pass strings. Joel Linn Eliminate additional heap allocation for short-lived HSTRINGs. Uses `WindowsCreateStringReference()` to disable reference counting and memory management by the Window Runtime.
50203d58	2020-12-08T22:00:06	Fixed bug 5329 - SDL_SetWindowGrab(SDL_FALSE) fails to unlock cursor if window is partially offscreen Ivan Mogilko With SDL 2.0.12 under MS Windows, if the window is partially offscreen calling SDL_SetWindowGrab(w, SDL_TRUE) works, but subsequent call to SDL_SetWindowGrab(w, SDL_FALSE) does not work. I tested this in both real program, and a small test app, where unlocking cursor worked perfectly while window is fully in desktop bounds, but did not work if it was at least few pixels outside. For the reference, following code is enough to reproduce the issue: #include <windows.h> #include <SDL.h> int WinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance, LPSTR lpCmdLine, int nShowCmd) { SDL_Init(SDL_INIT_VIDEO); SDL_Window* w = SDL_CreateWindow("", SDL_WINDOWPOS_CENTERED, SDL_WINDOWPOS_CENTERED, 640, 400, 0); bool grabbed = false; bool want_quit = false; while (!want_quit) { SDL_Event event; while (SDL_PollEvent(&event)) { switch (event.type) { case SDL_QUIT: want_quit = true; break; case SDL_KEYDOWN: if (event.key.keysym.scancode == SDL_SCANCODE_SPACE) { SDL_SetWindowGrab(w, static_cast<SDL_bool>(!grabbed)); grabbed = !grabbed; } } } } SDL_DestroyWindow(w); SDL_Quit(); return 0; }
43aad966	2020-12-08T19:03:50	Fixed bug 5222 - Crash when running with -DHIDAPI=ON Mathieu Eyraud SDL dynamically loads libusb but does not check the return value of 'SDL_LoadFunction'. Also libusb is loaded and initialized several time because 'SDL_hidapi_wasinit' is never set to true. I made a patch if you want to test: - check that 'hid_init' is called once and only once, - check return value of 'hid_init', - check return value of 'SDL_LoadFunction', - check return value of 'SDL_malloc', - add some debug logging.
a2098a47	2020-12-08T18:56:06	Updated SDL to 2.0.14 in preparation for release candidate
c9723c40	2020-12-07T09:38:21	Fixed potential hang in joystick close if the rumble thread is blocked for some reason It's still possible to hang when shutting down, if the rumble thread is still hung, but it won't block indefinitely at runtime.
09909d02	2020-12-03T19:44:47	Fixed handling of BACK button on newer Xbox One S controllers
54e5136b	2020-12-03T18:17:04	Refactored Xbox One Bluetooth protocol and verified Xbox One S, Xbox Series X, and Xbox One Elite Series 2 controllers
1031231b	2020-12-03T18:17:03	Fixed duplicating a device between XInput and HIDAPI
59f28b7f	2020-12-03T18:17:01	Fixed whitespace
f487d63a	2020-12-03T18:16:56	Fixed crash when printing NULL wide character string
754286c6	2020-12-02T13:45:24	SDL Renderer: specify the correct flag when recreating the window
035f8f23	2020-12-02T13:37:59	SDL_RecreateWindow: allow clearing VULKAN when recreating the window
93fbab0f	2020-12-02T11:04:53	SDL_ReCreateWindow: allow to unload METAL window and switch back to OpenGL. On older mac, where METAL Renderer METAL fails to create, it allows to switch back to OpenGL SDL_Renderer by re-creating the window (METAL flags was previously persistent).
c78ca2d1	2020-12-01T13:38:42	Fixed bug 5371 - Rawinput: Fix truncating cast of string length. Joel Linn Fixes an implicit truncation of a string length on 64bit systems.
a3ccf9ad	2020-12-01T13:36:41	Fixed bug 5373 - [PATCH] Rawinput: Get correlated XInput battery info Joel Linn Currently the rawinput driver always reports a device as "wired". This changes that to "unknown" and updates it once the device is correlated with xinput.
e3966e25	2020-11-30T13:04:30	Use the correct internal API for updating the battery level for PS5 controllers
f4ed07de	2020-11-30T13:02:34	We don't know whether the PS5 controller is Bluetooth or not when we open it
1f2f536b	2020-11-27T18:57:40	Fixed XInput correlation for raw input controllers after hotplug events
1c865c46	2020-11-27T18:57:36	Load the raw input device list at init time so it's available when DirectInput is doing device detection
a0c5bfa3	2020-11-27T13:08:40	Moved raw input event processing from the main thread to the joystick thread This allows fast joystick event delivery regardless of what the main thread is doing.
4fbefbe2	2020-11-27T11:33:53	Sort the raw input axes by usage, so X comes before Y, etc.
4ddac485	2020-11-27T11:33:51	Backed out minor optimization that prevented correlation_id from being set
8973a258	2020-11-27T10:44:56	Enable dispatching of WM_INPUT_DEVICE_CHANGE events directly, in case the application hasn't created a window with the normal message loop
e8adc648	2020-11-27T10:44:55	Enable dispatching of WM_INPUT events directly, in case the application hasn't created a window with the normal message loop
0252235e	2020-11-27T10:44:53	Recheck devices if another API queries raw input for a new device
a7dede7e	2020-11-27T10:44:51	Re-enable axis correlation for raw input controllers, for twin stick shooters that don't need face buttons
ce77966d	2020-11-27T10:44:49	Fixed RAWINPUT_IsDevicePresent() not returning TRUE for Xbox One controllers
8a449de2	2020-11-27T10:44:47	Fixed Xbox 360 wireless controller being picked up by WGI when it's being managed by RAWINPUT
37c9e4af	2020-11-27T06:03:15	Fixed processing WM_INPUT_DEVICE_CHANGE at startup
248fc75b	2020-11-27T05:53:56	Correlate just based on buttons, joystick axes are not as precise and could potentially cause incorrect uncorrelation. It's okay if the triggers aren't precise until someone presses a button on their controller.
e7e615de	2020-11-27T05:53:54	Removed extraneous windows message pumping Most of the raw input events are dispatched in the main windows message loop. We only dispatch device change messages separately when we need them to be completely up to date.
2931eccd	2020-11-27T05:53:52	Fixed detecting Bluetooth raw input devices, which have device names longer than 128 characters
849ce803	2020-11-27T05:53:50	Renamed SDL_JOYSTICK_RAWINPUT_GAMING_INPUT to SDL_JOYSTICK_RAWINPUT_WGI
219a28dd	2020-11-27T03:45:05	Fixed D-pad uncorrelating raw input controllers (thanks Jimbly!)
2c079a2f	2020-11-27T09:42:14	SDL_FillRects: prevent empty SDL_surface from raising an error message It's legitimate to have a surface with 0 width or height (null 'pixels' pointer). But calling SDL_FillRects would wrongly set the error "You must lock the surface".
3fbff2a4	2020-11-26T10:47:33	SDL_rawinputjoystick.c: fix ambiguous 'else' warning src/joystick/windows/SDL_rawinputjoystick.c: In function 'RAWINPUT_HandleStatePacket': src/joystick/windows/SDL_rawinputjoystick.c:1343:9: warning: suggest explicit braces to avoid ambiguous 'else'
845b9033	2020-11-25T16:46:42	Implemented trigger rumble for raw input controllers
517be808	2020-11-25T16:05:19	Implemented battery status for Bluetooth Xbox One controllers Also switched the rumble loop count to 0xEB (one hour) to match Windows driver
6a7f29cd	2020-11-25T11:31:17	Fixed compiling on tvOS
9ec2cf56	2020-11-25T10:31:59	Fixed building with Windows.Gaming.Input enabled
3c07dd12	2020-11-25T10:28:48	Strip an extra '.' off of the HORI manufacturer name
159d1b3d	2020-11-25T01:35:45	Don't set the serial number after the controller is opened We'll use the USB value instead so it's available as soon as it's opened.
7d92b14f	2020-11-25T01:18:18	Simplified Xbox One controller initialization state, and don't query for the serial number.
9fc4a4c9	2020-11-24T22:25:26	Revamped Xbox One HIDAPI init sequence Added support for querying the controller serial number on newer firmware
46a84478	2020-11-24T12:43:01	Added SDL_wcscasecmp() and SDL_wcsncasecmp()
e4b7d9a2	2020-11-24T07:56:59	Removed usage of TARGET_OS_OSX for building with older SDKs
a5cde4cb	2020-11-24T07:29:55	Fixed trying to use @available() on older SDK
97782e6c	2020-11-24T07:11:49	Don't try to call IOS_SupportedHIDDevice() if it's not defined
a063b9fb	2020-11-24T07:06:31	Fixed compiler warning
c63bbb06	2020-11-24T06:55:33	Including SDL_config_iphoneos.h enables MFI controller code
7a05dbf4	2020-11-24T06:42:53	Fixed building on FreeBSD Alex S Looks like we have a collision with https://hg.libsdl.org/SDL/rev/cd774daff9f6. (Again, the headers in the base system are intended for drivers and should not be used for compiling non-base applications. At least that's the policy for now: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=240964#c19.)
feab9d42	2020-11-24T06:40:13	5363 - Memory leak of joystick->sensors in SDL_JoystickClose Mathieu Eyraud Joystick->sensors is never freed.
34bea84a	2020-11-23T23:03:55	Fixed bug 5335 - Patch: enable joystick/haptic/evdev support by default on FreeBSD Alex S Ah, that's not quite enough. You need to: 1. rename src/joystick/bsd/SDL_sysjoystick.c to something; 2. regenerate configure.
1e943e2a	2020-11-23T22:59:22	Fixed building with an older SDK and macOS target
4121ab62	2020-11-23T21:25:07	Fixed bug 5354 - DirectFB: Add Vulkan support Nicolas Caramelli This patch adds Vulkan support for the DirectFB video driver. A screenshot with SDL tests running on DirectFB is available on the HiGFXback project: https://github.com/caramelli/higfxback/wiki/DirectFB#sdl
e44bf8a0	2020-11-23T21:18:37	Fixed bug 5359 - Incorrect sensor data from DualShock4 multiply gyro values by sensitivity When the hardware calibration fails, values read from sensors need to be multiplied by default sensitivity (16 for gyro, 1 for accelerometer).
c8c818d7	2020-11-23T21:14:37	Fixed bug 5360 - non-libudev joystick detection doesn't see controllers that were already connected Simon McVittie When watching for hotplug events we can poll the inotify fd, but we still need to scan /dev/input once per process, otherwise we'll fail to detect devices that were already connected.
8e2746cf	2020-11-23T21:10:48	joystick: Don't use udev in Flatpak or pressure-vessel container Flatpak[1] and pressure-vessel[2] are known to use user namespaces, therefore udev event notification via netlink won't work reliably. Both frameworks provide a filesystem API that libraries can use to detect them. Do that, and automatically fall back from udev-based device discovery to the inotify-based fallback introduced in Bug #5337. [1] <https://flatpak.org/> [2] <https://gitlab.steamos.cloud/steamrt/steam-runtime-tools/-/tree/master/pressure-vessel> Signed-off-by: Simon McVittie <smcv@collabora.com>
e9869e07	2020-11-23T21:08:19	Fixed bug 5335 - enable joystick/haptic/evdev support by default on FreeBSD Alex S Evdev headers aren't actually included in the base system (well, it has a private copy), they are available through the devel/evdev-proto port instead. We also have devel/libinotify and devel/libudev-devd shims, I didn't verify whether they work with SDL.
62e39b5f	2020-11-23T20:57:14	Fixed building with an older SDK and macOS target
268aa456	2020-11-23T20:26:28	Fixed compiling with SDL_JOYSTICK_RAWINPUT disabled
eaa53a19	2020-11-23T22:16:07	joystick: On Linux, don't try to close an invalid inotify file descriptor.
5c957747	2020-11-23T22:14:22	joystick: Fix up Linux joystick code to (mostly) compile on FreeBSD.
179bd665	2020-11-23T18:27:43	Don't enable PS5 controller support if DS4Windows is running - they conflict.
5b3616c3	2020-11-23T18:24:05	Generalized the raw input controller driver and moved XInput/WGI detection into it for XInput devices This fixes bad report parsing for various newer Xbox controllers, and this driver is now preferred over XInput, since it handles more than 4 controllers.
0ff5d55a	2020-11-23T21:07:28	x11: Don't try to grab the pointer on an unmapped window (thanks, Lee!) Fixes Bugzilla #5352.

6bd4c717

2020-12-17T21:41:23

Fixed bug 5402 - ARM support little update proposal David Carlier No fix but mostly an update for ARM architecture.

10625f9d

2020-12-17T23:50:00

SDL_windowsmessagebox.c: go back to hg rev 14458 state. encountering a NULL caption in AddDialogString() is intended, i.e. AddDialogStaticIcon() sends it as NULL on purpose.

4d6eb305

2020-12-17T23:28:20

SDL_windowsmessagebox.c (AddDialogControl): add back NULL caption check. because AddDialogStaticIcon() sends a NULL caption -- fixes bug #5401.

90456670

2020-12-17T14:11:00

more "'for' loop initial declarations are only allowed in C99 mode" fixes

ed4fcb2c

2020-12-16T03:24:10

kmsdrm_legacy build fixes: - add missing '_LEGACY' to symbol names - perform missing 2.0.14 portage - fix 'for' loop initial declarations are only allowed in C99 mode errors

f484abbd

2020-12-15T14:57:51

Added Android mapping for the Xbox One Series X controller over Bluetooth

14f97734

2020-12-15T14:57:47

Fixed whitespace

9940e710

2020-12-16T00:10:30

Import two post-2.0.12 fixes to kmsdrm_legacy: Fix build breakage without EGL: https://hg.libsdl.org/SDL/rev/f2606fe53654e305ab9badb821d9d3afb7f92f49 Fix KMSDRM_CreateWindow segfault when starting L?VE2D engine (bug 5199) https://hg.libsdl.org/SDL/rev/d2e69a78939463d9ff9448a5f4efd1e208bb97b0

f8839289

2020-12-15T12:22:48

Potential fix for bug 5393 - KMSDRM: using atomic mode setting breaks GPU compatibility Substring I was trying the KMSDRM video backend with some very simple programs that were working ok on 2.0.12. The same code won?t work on the current dev branch and I get: DEBUG: check_modesetting: probing ?/dev/dri/card0? DEBUG: /dev/dri/card0 connector, encoder and CRTC counts are: 4 5 6 DEBUG: check_modesetting: probing ?/dev/dri/card0? DEBUG: /dev/dri/card0 connector, encoder and CRTC counts are: 4 5 6 DEBUG: KMSDRM_VideoInit() DEBUG: Opening device /dev/dri/card0 DEBUG: Opened DRM FD (3) DEBUG: no atomic modesetting support. DEBUG: Video subsystem has not been initialized INFO: Using SDL video driver: (null) DEBUG: Video subsystem has not been initialized After carefully checking, the radeon driver doesn?t support atomic modesetting. That?s not the only problem : the same happens with the amdgpu driver if we disable Display Core (kernel parameter amdgpu.dc=0, which is required to get analogue outputs working). This is a major regression in the KMSDRM driver. Using atomic mode setting is great, but having no fallback to the "standard KMS" is bad.

637d425e

2020-12-15T00:11:10

whitespace.

e65e4fd3

2020-12-14T09:48:51

Fixed detecting the guide button on Xbox One S controllers over Bluetooth on Linux

f1c7cc71

2020-12-14T12:36:04

winrt: Buildfix for older UWP SDKs

bfffa275

2020-12-14T09:23:53

Fixed bug 5397 - Fcitx input is truncated sowfelicity Split the long text input event into multiple shorten text input event.

8795ca70

2020-12-14T09:15:47

Fixed bug 5241 - SDL on Linux needs a way to turn deadzones off pj5085 I added some printf to verify the math being done. Of the three joysticks I have, it works correctly for at least two, and seems to work correctly for the third. I say "seems to" because, for the third joystick, the values never go through the AxisCorrect function, and thus never hit my printf statements, even though they did in the version I wrote my patch against. I'm not sure what's going on there, but it at least seems to be working correctly in as much as I can tell. I note this result in particular, for an SNES Gamepad (min=0, max=255): Joystick value 0 becomes -32768 Joystick value 127 becomes 0 Joystick value 255 becomes 32767 Without the code that forces a zero point, the 127 input value would become -129, so I think you see why I added that code to turn it into zero. However, I think Kai Krakow has a point about how SDL shouldn't assume that there should be a center. Obviously in the majority of cases there actually should be a center, and the code that turns that 127 into an actual 0 is creating only a 0.2% error over 0.4% of this joystick's range. However, what if there is an axis that is some kind of special control, like a 4-position switch, and, for whatever reason, the joystick reports it as an axis with 4 possible values, 0 to 3? In that case, mutilating the two center values to the same value is much more of an error and and turns that 4-position switch into a 3-position switch. If any joystick does this with a 2-position switch, then this code would render that control entirely useless as it would report the same value with the switch in either position. Obviously the code could require that there be at least N possible values, to guess whether something is a proper axis or just some kind of switch, but the choice of N would be arbitrary and that's ugly. I guess the real problem here is that my gamepad is just kind of broken. It should be reporting a range of -1 to +1 since that's what it actually does. Also, as Kai Krakow points out, it's probably not SDL's place to fix broken hardware. I'll add that, if SDL does fix broken hardware, it should probably actually know that it's broken rather than be merely guessing that it is. So, to the extent that SDL is able to do stuff like this, perhaps it's something better left for the user to configure in some kind of config file.

169cfe5a

2020-12-14T11:52:09

winrt: EffectiveLocation still needs an ifdef, IsApiContractPresent is for runtime

3c2757ff

2020-12-13T18:25:02

windows SDL_LoadObject: fix warning after commit 2ff650230d96

15cbddf4

2020-12-13T18:00:20

linux/SDL_threadprio.c: fix build on older systems: SCHED_RESET_ON_FORK is in kernel >= 2.6.32.

3b92933a

2020-12-13T17:37:50

SDL_LoadObject (windows, os/2): prevent crash if dll name is NULL.

b6e63625

2020-12-13T15:32:24

fix bug #5395: handle old systems where inotify_init1 is not available

ee85a41a

2020-12-13T02:10:46

Fixed compile warning

706f6375

2020-12-13T01:58:05

Fixed build for platforms with only libusb hidapi implementations

80e5c689

2020-12-13T01:20:38

Fixed the PS5 controller not disconnecting when powered off

db0a2025

2020-12-12T23:48:02

Fixed bug 5241 - SDL on Linux needs a way to turn deadzones off pj5085 It occurred to me that my simple patch that comments out a few lines of code does not correctly remove the dead zone since the calculation presumably assumes the dead zone has been cut out of the range. Then, while looking into how to make it output the correct range of values, I realized SDL wasn't returning the correct range of values to begin with. This line of code was already present: printf("Values = { %d, %d, %d, %d, %d }\n", absinfo.value, absinfo.minimum, absinfo.maximum, absinfo.fuzz, absinfo.flat); For my joystick this yeilds: Values = { 0, -127, 127, 0, 15 } Then this code calculates the coefficients: In SDL1: joystick->hwdata->abs_correct[i].coef[0] = (absinfo.maximum + absinfo.minimum) / 2 - absinfo.flat; joystick->hwdata->abs_correct[i].coef[1] = (absinfo.maximum + absinfo.minimum) / 2 + absinfo.flat; t = ((absinfo.maximum - absinfo.minimum) / 2 - 2 * absinfo.flat); if ( t != 0 ) { joystick->hwdata->abs_correct[i].coef[2] = (1 << 29) / t; } else { joystick->hwdata->abs_correct[i].coef[2] = 0; } In SDL2: joystick->hwdata->abs_correct[i].coef[0] = (absinfo.maximum + absinfo.minimum) - 2 * absinfo.flat; joystick->hwdata->abs_correct[i].coef[1] = (absinfo.maximum + absinfo.minimum) + 2 * absinfo.flat; t = ((absinfo.maximum - absinfo.minimum) - 4 * absinfo.flat); if (t != 0) { joystick->hwdata->abs_correct[i].coef[2] = (1 << 28) / t; } else { joystick->hwdata->abs_correct[i].coef[2] = 0; } Neither calculates the correct coefficients for the code in the AxisCorrect function. In SDL1: if ( value > correct->coef[0] ) { if ( value < correct->coef[1] ) { return 0; } value -= correct->coef[1]; } else { value -= correct->coef[0]; } value *= correct->coef[2]; value >>= 14; In SDL2: value *= 2; if (value > correct->coef[0]) { if (value < correct->coef[1]) { return 0; } value -= correct->coef[1]; } else { value -= correct->coef[0]; } In SDL1, the calculated coefficients are coef[0]=15, coef[1]=-15 and coef[2]=5534751. So with a full-scale input of 127, it calculates an output value of 37835, which is considerably out of range. In SDL2, the calculated coefficients are coef[0]=30, coef[1]=-30, and coef[2]=1383687. So with a full-scale input of 127, it calculates the same output value of 37835. I tested it with the 3 joysticks I have, and it produces out-of-range values for all of them. Anyway, since dead zones are garbage, I just deleted all of that junk and wrote some code that takes the absinfo.minimum and absinfo.maximum values and uses them to scale the axis range to -32767 through +32767. I also made it detect when a range doesn't have an integer center point, e.g. the center of -128 to + 127 is -0.5. In such cases, if either value to the side of the center is provided, it zeros it, but it otherwise doesn't implement any kind of dead zone. This seemed important with my gamepad which provides only the values of 0, 127, and 255, since without this hack it would never be centered. Also, the previous minimum output value was -32768, but as that creates an output range that has no true center, I changed the minimum value to -32767. I tested it with the 3 joystick devices I have and it seems to create correct values for all of them.

0ccb3afd

2020-12-12T22:33:11

Fixed polling values after SYN_DROPPED event

9ee0e888

2020-12-12T22:11:00

Whoops, make the hint actually default to false

13a4caf1

2020-12-12T22:08:02

Fixed bug 4286 - Joystick subsystem causes "not responding" when app is in the background Added a hint to control whether a separate thread should be used for joystick events. This is off by default because dispatching messages in other threads appears to cause problems on some versions of Windows.

5c212cb0

2020-12-10T12:24:24

remove a few stale NULL message/title checks after commit e2b729b1756a top-level guarantees non-NULL message / title passed in messageboxdata

f1cab8ae

2020-12-10T11:20:56

fix bug #5253: handle NULL title or message fields in SDL_MessageBoxData - SDL_video.c (SDL_ShowMessageBox): replace messageboxdata, set title or message field to "" if either of them is NULL. - SDL_video.c (SDL_ShowSimpleMessageBox): set title or message to "" if either of them is NULL for EMSCRIPTEN builds. - SDL_bmessagebox.cc: add empty string check along with NULL check for title and message fields. - SDL_windowsmessagebox.c (AddDialogString): remove NULL string check - SDL_windowsmessagebox.c (AddDialogControl): add empty string check along with the NULL check. - SDL_x11messagebox.c: revert commit 677c4cd68069 - SDL_os2messagebox.c: revert commit 2c2a489d76e7 - test/testmessage.c: Add NULL title and NULL message tests.

797a6910

2020-12-09T20:28:51

Fixed bug 5375 - WGI: Fix HSTRING memory leak. Joel Linn TLDR; https://godbolt.org/z/43fd8G Let's deduce this from C++ reference code: https://docs.microsoft.com/en-us/cpp/cppcx/wrl/how-to-activate-and-use-a-windows-runtime-component-using-wrl?view=msvc-160 At the bottom of the page there is this snippet: ``` int wmain() { /* ... more code ... */ // Get the domain part of the URI. HString domainName; hr = uri->get_Domain(domainName.GetAddressOf()); if (FAILED(hr)) { return PrintError(__LINE__, hr); } // Print the domain name and return. wprintf_s(L"Domain name: %s\n", domainName.GetRawBuffer(nullptr)); // All smart pointers and RAII objects go out of scope here. } ``` `HString` is defined in `corewrappers.h` and the call chain for the destructor is: `~HString() -> Release() -> ::WindowsDeleteString()` QED

a77a0715

2020-12-09T07:50:15

Disabled raw input debug output

d46dd103

2020-12-09T07:49:07

Fixed typo in Vulkan load logic

7fa5e95b

2020-12-09T07:23:47

Fixed bug 5213 - Add support to metal in iOS/tvOS simulator Vincent Hamm Xcode11 and ios13 added support for metal simulator. Here is a quick and dirty patch to enable it. Pretty early and only tested on a few samples for now. Required mostly to enable metal support on correct version of ios, generate simulator compatible shaders and enforce buffer alignments on simulator (same as osx).

cb361896

2020-12-09T07:16:22

Fixed bug 5235 - All internal sources should include SDL_assert.h Ryan C. Gordon We should really stick this in SDL_internal.h or something so it's always available.

88cb4962

2020-12-09T06:42:31

Fixed bug 5291 - SDL_SetRenderTarget unnecessarily changes target when current target is the native texture of the passed in texture

f2fff217

2020-12-09T06:24:40

Fixed bug 5374 - WGI: Use fast-pass strings. Joel Linn Eliminate additional heap allocation for short-lived HSTRINGs. Uses `WindowsCreateStringReference()` to disable reference counting and memory management by the Window Runtime.

50203d58

2020-12-08T22:00:06

Fixed bug 5329 - SDL_SetWindowGrab(SDL_FALSE) fails to unlock cursor if window is partially offscreen Ivan Mogilko With SDL 2.0.12 under MS Windows, if the window is partially offscreen calling SDL_SetWindowGrab(w, SDL_TRUE) works, but subsequent call to SDL_SetWindowGrab(w, SDL_FALSE) does not work. I tested this in both real program, and a small test app, where unlocking cursor worked perfectly while window is fully in desktop bounds, but did not work if it was at least few pixels outside. For the reference, following code is enough to reproduce the issue: #include <windows.h> #include <SDL.h> int WinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance, LPSTR lpCmdLine, int nShowCmd) { SDL_Init(SDL_INIT_VIDEO); SDL_Window* w = SDL_CreateWindow("", SDL_WINDOWPOS_CENTERED, SDL_WINDOWPOS_CENTERED, 640, 400, 0); bool grabbed = false; bool want_quit = false; while (!want_quit) { SDL_Event event; while (SDL_PollEvent(&event)) { switch (event.type) { case SDL_QUIT: want_quit = true; break; case SDL_KEYDOWN: if (event.key.keysym.scancode == SDL_SCANCODE_SPACE) { SDL_SetWindowGrab(w, static_cast<SDL_bool>(!grabbed)); grabbed = !grabbed; } } } } SDL_DestroyWindow(w); SDL_Quit(); return 0; }

43aad966

2020-12-08T19:03:50

Fixed bug 5222 - Crash when running with -DHIDAPI=ON Mathieu Eyraud SDL dynamically loads libusb but does not check the return value of 'SDL_LoadFunction'. Also libusb is loaded and initialized several time because 'SDL_hidapi_wasinit' is never set to true. I made a patch if you want to test: - check that 'hid_init' is called once and only once, - check return value of 'hid_init', - check return value of 'SDL_LoadFunction', - check return value of 'SDL_malloc', - add some debug logging.

a2098a47

2020-12-08T18:56:06

Updated SDL to 2.0.14 in preparation for release candidate

c9723c40

2020-12-07T09:38:21

Fixed potential hang in joystick close if the rumble thread is blocked for some reason It's still possible to hang when shutting down, if the rumble thread is still hung, but it won't block indefinitely at runtime.

09909d02

2020-12-03T19:44:47

Fixed handling of BACK button on newer Xbox One S controllers

54e5136b

2020-12-03T18:17:04

Refactored Xbox One Bluetooth protocol and verified Xbox One S, Xbox Series X, and Xbox One Elite Series 2 controllers

1031231b

2020-12-03T18:17:03

Fixed duplicating a device between XInput and HIDAPI

59f28b7f

2020-12-03T18:17:01

Fixed whitespace

f487d63a

2020-12-03T18:16:56

Fixed crash when printing NULL wide character string

754286c6

2020-12-02T13:45:24

SDL Renderer: specify the correct flag when recreating the window

035f8f23

2020-12-02T13:37:59

SDL_RecreateWindow: allow clearing VULKAN when recreating the window

93fbab0f

2020-12-02T11:04:53

SDL_ReCreateWindow: allow to unload METAL window and switch back to OpenGL. On older mac, where METAL Renderer METAL fails to create, it allows to switch back to OpenGL SDL_Renderer by re-creating the window (METAL flags was previously persistent).

c78ca2d1

2020-12-01T13:38:42

Fixed bug 5371 - Rawinput: Fix truncating cast of string length. Joel Linn Fixes an implicit truncation of a string length on 64bit systems.

a3ccf9ad

2020-12-01T13:36:41

Fixed bug 5373 - [PATCH] Rawinput: Get correlated XInput battery info Joel Linn Currently the rawinput driver always reports a device as "wired". This changes that to "unknown" and updates it once the device is correlated with xinput.

e3966e25

2020-11-30T13:04:30

Use the correct internal API for updating the battery level for PS5 controllers

f4ed07de

2020-11-30T13:02:34

We don't know whether the PS5 controller is Bluetooth or not when we open it

1f2f536b

2020-11-27T18:57:40

Fixed XInput correlation for raw input controllers after hotplug events

1c865c46

2020-11-27T18:57:36

Load the raw input device list at init time so it's available when DirectInput is doing device detection

a0c5bfa3

2020-11-27T13:08:40

Moved raw input event processing from the main thread to the joystick thread This allows fast joystick event delivery regardless of what the main thread is doing.

4fbefbe2

2020-11-27T11:33:53

Sort the raw input axes by usage, so X comes before Y, etc.

4ddac485

2020-11-27T11:33:51

Backed out minor optimization that prevented correlation_id from being set

8973a258

2020-11-27T10:44:56

Enable dispatching of WM_INPUT_DEVICE_CHANGE events directly, in case the application hasn't created a window with the normal message loop

e8adc648

2020-11-27T10:44:55

Enable dispatching of WM_INPUT events directly, in case the application hasn't created a window with the normal message loop

0252235e

2020-11-27T10:44:53

Recheck devices if another API queries raw input for a new device

a7dede7e

2020-11-27T10:44:51

Re-enable axis correlation for raw input controllers, for twin stick shooters that don't need face buttons

ce77966d

2020-11-27T10:44:49

Fixed RAWINPUT_IsDevicePresent() not returning TRUE for Xbox One controllers

8a449de2

2020-11-27T10:44:47

Fixed Xbox 360 wireless controller being picked up by WGI when it's being managed by RAWINPUT

37c9e4af

2020-11-27T06:03:15

Fixed processing WM_INPUT_DEVICE_CHANGE at startup

248fc75b

2020-11-27T05:53:56

Correlate just based on buttons, joystick axes are not as precise and could potentially cause incorrect uncorrelation. It's okay if the triggers aren't precise until someone presses a button on their controller.

e7e615de

2020-11-27T05:53:54

Removed extraneous windows message pumping Most of the raw input events are dispatched in the main windows message loop. We only dispatch device change messages separately when we need them to be completely up to date.

2931eccd

2020-11-27T05:53:52

Fixed detecting Bluetooth raw input devices, which have device names longer than 128 characters

849ce803

2020-11-27T05:53:50

Renamed SDL_JOYSTICK_RAWINPUT_GAMING_INPUT to SDL_JOYSTICK_RAWINPUT_WGI

219a28dd

2020-11-27T03:45:05

Fixed D-pad uncorrelating raw input controllers (thanks Jimbly!)

2c079a2f

2020-11-27T09:42:14

SDL_FillRects: prevent empty SDL_surface from raising an error message It's legitimate to have a surface with 0 width or height (null 'pixels' pointer). But calling SDL_FillRects would wrongly set the error "You must lock the surface".

3fbff2a4

2020-11-26T10:47:33

SDL_rawinputjoystick.c: fix ambiguous 'else' warning src/joystick/windows/SDL_rawinputjoystick.c: In function 'RAWINPUT_HandleStatePacket': src/joystick/windows/SDL_rawinputjoystick.c:1343:9: warning: suggest explicit braces to avoid ambiguous 'else'

845b9033

2020-11-25T16:46:42

Implemented trigger rumble for raw input controllers

517be808

2020-11-25T16:05:19

Implemented battery status for Bluetooth Xbox One controllers Also switched the rumble loop count to 0xEB (one hour) to match Windows driver

6a7f29cd

2020-11-25T11:31:17

Fixed compiling on tvOS

9ec2cf56

2020-11-25T10:31:59

Fixed building with Windows.Gaming.Input enabled

3c07dd12

2020-11-25T10:28:48

Strip an extra '.' off of the HORI manufacturer name

159d1b3d

2020-11-25T01:35:45

Don't set the serial number after the controller is opened We'll use the USB value instead so it's available as soon as it's opened.

7d92b14f

2020-11-25T01:18:18

Simplified Xbox One controller initialization state, and don't query for the serial number.

9fc4a4c9

2020-11-24T22:25:26

Revamped Xbox One HIDAPI init sequence Added support for querying the controller serial number on newer firmware

46a84478

2020-11-24T12:43:01

Added SDL_wcscasecmp() and SDL_wcsncasecmp()

e4b7d9a2

2020-11-24T07:56:59

Removed usage of TARGET_OS_OSX for building with older SDKs

a5cde4cb

2020-11-24T07:29:55

Fixed trying to use @available() on older SDK

97782e6c

2020-11-24T07:11:49

Don't try to call IOS_SupportedHIDDevice() if it's not defined

a063b9fb

2020-11-24T07:06:31

Fixed compiler warning

c63bbb06

2020-11-24T06:55:33

Including SDL_config_iphoneos.h enables MFI controller code

7a05dbf4

2020-11-24T06:42:53

Fixed building on FreeBSD Alex S Looks like we have a collision with https://hg.libsdl.org/SDL/rev/cd774daff9f6. (Again, the headers in the base system are intended for drivers and should not be used for compiling non-base applications. At least that's the policy for now: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=240964#c19.)

feab9d42

2020-11-24T06:40:13

5363 - Memory leak of joystick->sensors in SDL_JoystickClose Mathieu Eyraud Joystick->sensors is never freed.

34bea84a

2020-11-23T23:03:55

Fixed bug 5335 - Patch: enable joystick/haptic/evdev support by default on FreeBSD Alex S Ah, that's not quite enough. You need to: 1. rename src/joystick/bsd/SDL_sysjoystick.c to something; 2. regenerate configure.

1e943e2a

2020-11-23T22:59:22

Fixed building with an older SDK and macOS target

4121ab62

2020-11-23T21:25:07

Fixed bug 5354 - DirectFB: Add Vulkan support Nicolas Caramelli This patch adds Vulkan support for the DirectFB video driver. A screenshot with SDL tests running on DirectFB is available on the HiGFXback project: https://github.com/caramelli/higfxback/wiki/DirectFB#sdl

e44bf8a0

2020-11-23T21:18:37

Fixed bug 5359 - Incorrect sensor data from DualShock4 multiply gyro values by sensitivity When the hardware calibration fails, values read from sensors need to be multiplied by default sensitivity (16 for gyro, 1 for accelerometer).

c8c818d7

2020-11-23T21:14:37

Fixed bug 5360 - non-libudev joystick detection doesn't see controllers that were already connected Simon McVittie When watching for hotplug events we can poll the inotify fd, but we still need to scan /dev/input once per process, otherwise we'll fail to detect devices that were already connected.

8e2746cf

2020-11-23T21:10:48

joystick: Don't use udev in Flatpak or pressure-vessel container Flatpak[1] and pressure-vessel[2] are known to use user namespaces, therefore udev event notification via netlink won't work reliably. Both frameworks provide a filesystem API that libraries can use to detect them. Do that, and automatically fall back from udev-based device discovery to the inotify-based fallback introduced in Bug #5337. [1] <https://flatpak.org/> [2] <https://gitlab.steamos.cloud/steamrt/steam-runtime-tools/-/tree/master/pressure-vessel> Signed-off-by: Simon McVittie <smcv@collabora.com>

e9869e07

2020-11-23T21:08:19

Fixed bug 5335 - enable joystick/haptic/evdev support by default on FreeBSD Alex S Evdev headers aren't actually included in the base system (well, it has a private copy), they are available through the devel/evdev-proto port instead. We also have devel/libinotify and devel/libudev-devd shims, I didn't verify whether they work with SDL.

62e39b5f

2020-11-23T20:57:14

Fixed building with an older SDK and macOS target

268aa456

2020-11-23T20:26:28

Fixed compiling with SDL_JOYSTICK_RAWINPUT disabled

eaa53a19

2020-11-23T22:16:07

joystick: On Linux, don't try to close an invalid inotify file descriptor.

5c957747

2020-11-23T22:14:22

joystick: Fix up Linux joystick code to (mostly) compile on FreeBSD.

179bd665

2020-11-23T18:27:43

Don't enable PS5 controller support if DS4Windows is running - they conflict.

5b3616c3

2020-11-23T18:24:05

Generalized the raw input controller driver and moved XInput/WGI detection into it for XInput devices This fixes bad report parsing for various newer Xbox controllers, and this driver is now preferred over XInput, since it handles more than 4 controllers.

0ff5d55a

2020-11-23T21:07:28

x11: Don't try to grab the pointer on an unmapped window (thanks, Lee!) Fixes Bugzilla #5352.

kc3-lang/SDL/src

src

Log