kmx git

Commit	Date	Message
57bc9040	2022-01-07T08:54:08	Add hint to optionally forcibly raise the window under MS Windows.
120c76c8	2022-01-03T09:40:00	Updated copyright for 2022
67c42cb4	2021-11-08T22:16:01	Fixed Windows build
fd79607e	2021-11-08T21:34:48	Added SDL_GetWindowMouseRect() Also guarantee that we won't get mouse movement outside the confining area, even if the OS implementation allows it (e.g. macOS)
4db546b0	2021-11-08T20:35:12	Implemented SDL_SetWindowMouseRect() on macOS
2d23d66a	2021-11-08T16:33:50	Fixed SetWindowMouseRect return value on Windows
7d21322d	2021-11-08T16:29:19	Implemented SDL_SetWindowMouseRect() on Windows
19dee1cd	2021-10-22T06:37:20	Add SDL_GetWindowICCProfile(). (#4314) * Add SDL_GetWindowICCProfile * Add new SDL display events * Implement ICC profile change event for macOS * Implement ICC profile notification for Windows * Fix SDL_GetWindowICCProfile() for X11 * Fix compile errors
a1fabca1	2021-10-14T16:52:21	Removed mouse warping for local mice and improved warp handling for mouse over RDP
5e89b3c8	2021-10-14T11:46:07	Don't need to use raw input to track the mouse during mouse capture (thanks Brick!)
0789610c	2021-10-14T00:52:05	Add SDL_HINT_WINDOW_NO_ACTIVATION_WHEN_SHOWN
632aca29	2021-10-01T16:17:38	Window input focus is based on WM_SETFOCUS and WM_KILLFOCUS as WM_ACTIVATE doesn't necessarily imply focus. Hopefully resolves https://github.com/libsdl-org/SDL/issues/4450 and https://github.com/libsdl-org/SDL/pull/4293
712e0d1f	2021-08-07T16:23:15	Fixing WM_CHAR event handling for Unicode characters outside the Basic Multilingual Plane.
f1633127	2021-07-24T13:41:55	Added a window flash operation to be explicit about window flash behavior
e1c3a250	2021-07-24T12:11:27	Changed SDL_FlashWindow() so it doesn't take a flash count, and added the hint SDL_HINT_WINDOW_FLASH_COUNT to control behavior on Windows
4359a47b	2021-04-02T12:48:16	Simplify ClipCursor behaviour when RelativeMouseMode is enabled The implementation of clip logic for relative mode seemed to unnecessarily limit the usable area to the middle of the window, in a 2x2 pixel region. This has the adverse side effect of moving the operating system cursor to that location, even if it is in a valid location in the window. While in most scenarios this is handled correctly (by storing the original position of the cursor in the window and restoring when leaving relative mode), there are edge cases where this clip operation can cause WM_MOUSEMOVE to fire at a point in time where it counts as a relative delta from SDL's perspective.
3720e254	2021-04-02T12:48:02	Trim some stray whitespace
64724db0	2021-06-04T19:55:30	Implement bare minimum for SDL_FlashWindow
a0a5da5d	2021-04-19T07:13:38	Add SDL_SetWindowAlwaysOnTop()
a78bce9e	2021-01-28T20:02:01	Properly handle keys already down when the hook is installed For keys that are already down when we install the keyboard hook, we need to allow the WM_KEYUP/WM_SYSKEYUP message to be processed normally. This ensures that other applications see the key up, which prevents the key from being stuck down from the perspective of other apps when our grab is released.
6b057c67	2021-01-26T19:16:17	Expose separate keyboard and mouse grab support This adds SDL_SetWindowKeyboardGrab(), SDL_GetWindowKeyboardGrab(), SDL_SetWindowMouseGrab(), SDL_GetWindowMouseGrab(), and new SDL_WINDOW_KEYBOARD_GRABBED flag. It also updates the test harness to exercise this functionality and makes a minor fix to X11 that I missed in https://hg.libsdl.org/SDL/rev/02a2d609369b To fit in with this new support, SDL_WINDOW_INPUT_CAPTURE has been renamed to SDL_WINDOW_MOUSE_CAPTURE with the old name remaining as an alias for backwards compatibility with older code.
e1f73e64	2021-01-23T16:22:44	Refactor keyboard grab to be managed by the video core This gives us flexibility to add others hints to control keyboard grab behavior without having to touch all of the backends. It also allows us to possibly expose keyboard grab separately from mouse grab for applications that want to manage those independently.
a0d3c6c6	2021-01-25T21:42:14	Rename SetWindowGrab() to SetWindowMouseGrab()
8c921d82	2021-01-22T19:40:26	Implement keyboard grab support for Windows This is implemented via a low-level keyboard hook. Unfortunately, this is rather invasive, but it's how Microsoft recommends that it be done [0]. We want to do as little as possible in the hook, so we only intercept a few crucial modifier keys there, while leaving other keys to the normal event processing flow. We will only install this hook if SDL_HINT_GRAB_KEYBOARD=1, which is not the default. This will reduce any compatibility concerns to just the SDL applications that explicitly ask for this behavior. We also remove the hook when the grab is terminated to ensure that we're not unnecessarily staying involved in key event processing when it's not required anymore. [0]: https://docs.microsoft.com/en-us/windows/win32/dxtecharts/disabling-shortcut-keys-in-games
76295cec	2021-01-05T15:50:10	video/windows: ANSI/UNICODE updates (cf. bug 5435): - explicitly use UNICODE versions of DrawText, EnumDisplaySettings, EnumDisplayDevices, and CreateDC: the underlying structures have WCHAR strings. - change WIN_UpdateDisplayMode and WIN_GetDisplayMode() to accept LPCWSTR instead of LPCTSTR for the same reason. - change WIN_StringToUTF8 and WIN_UTF8ToString to the explicit 'W' versions where appropriate.
390fd14f	2021-01-04T01:23:50	SDL_windowswindow.c (SDL_HelperWindowCreate): adjust for ANSI/UNICODE: change SDL_HelperWindowClassName and SDL_HelperWindowName from WCHAR * to be const TCHAR* cf. bug #5435.
9130f7c3	2021-01-02T10:25:38	Updated copyright for 2021
cb361896	2020-12-09T07:16:22	Fixed bug 5235 - All internal sources should include SDL_assert.h Ryan C. Gordon We should really stick this in SDL_internal.h or something so it's always available.
50203d58	2020-12-08T22:00:06	Fixed bug 5329 - SDL_SetWindowGrab(SDL_FALSE) fails to unlock cursor if window is partially offscreen Ivan Mogilko With SDL 2.0.12 under MS Windows, if the window is partially offscreen calling SDL_SetWindowGrab(w, SDL_TRUE) works, but subsequent call to SDL_SetWindowGrab(w, SDL_FALSE) does not work. I tested this in both real program, and a small test app, where unlocking cursor worked perfectly while window is fully in desktop bounds, but did not work if it was at least few pixels outside. For the reference, following code is enough to reproduce the issue: #include <windows.h> #include <SDL.h> int WinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance, LPSTR lpCmdLine, int nShowCmd) { SDL_Init(SDL_INIT_VIDEO); SDL_Window* w = SDL_CreateWindow("", SDL_WINDOWPOS_CENTERED, SDL_WINDOWPOS_CENTERED, 640, 400, 0); bool grabbed = false; bool want_quit = false; while (!want_quit) { SDL_Event event; while (SDL_PollEvent(&event)) { switch (event.type) { case SDL_QUIT: want_quit = true; break; case SDL_KEYDOWN: if (event.key.keysym.scancode == SDL_SCANCODE_SPACE) { SDL_SetWindowGrab(w, static_cast<SDL_bool>(!grabbed)); grabbed = !grabbed; } } } } SDL_DestroyWindow(w); SDL_Quit(); return 0; }
a0c5bfa3	2020-11-27T13:08:40	Moved raw input event processing from the main thread to the joystick thread This allows fast joystick event delivery regardless of what the main thread is doing.
44f50c64	2020-06-09T21:47:41	Fixed bug 5171 - PollEvent impacts performance in 2.0.12 On some systems, GetClipCursor() impacts performance when called frequently, so only call it every once in a while to make sure we haven't lost our capture.
0721931f	2020-04-06T19:21:56	Avoid sending regular mouse messages for touch input
4dea340c	2020-03-16T12:23:38	Fixed bug 4477 - Support more than 4 XInput-capable devices on Windows Jimb Esser Add new RawInput controller API, and improved correlation with XInput/WGI Reorder joystick init so drivers can ask the others if they handle a device reliably Do not poll disconnected XInput devices (major perf issue) Fix various cases where incorrect correlation could happen Simple mechanism for propagating unhandled Guide button presses even before guaranteed correlation Correlate by axis motion as well as button presses Fix failing to zero other trigger Fix SDL_HINT_JOYSTICK_HIDAPI not working if set before calling SDL_Init() Add missing device to device names Disable RawInput if we have a mismatch of XInput-capable but not RawInput-capable devices Updated to SDL 2.0.13 code with the following notes: New HID driver: xbox360w - no idea what that is, hopefully urelated SDL_hidapijoystick.c had been refactored to couple data handling logic with device opening logic and device lists caused some problems, yields slightly uglier integration than previously when the 360 HID device driver was just handling the data. SDL_hidapijoystick.c now often pulls the device off of the joystick_hwdata structure for some rumble logic, but it appears that code path is never reached, so probably not a problem. Looks like joystick_hwdata was refactored to not include a mutex in other drivers, maintainers may want to do the same refactor here if that's useful for some reason. Something changed in how devices get names, so getting generic names. Had to fix a (new?) bug where removing an XInput controller caused existing controllers (that moved to a new XInput index) to get identified as 0x045e/0x02fd ("it's probably Bluetooth" in code), rendering the existing HIDAPI_IsDevicePresent and new RAWINPUT_IsDevicePresent unreliable.
e261bd42	2020-02-12T12:26:27	Improved fix for bug 4748 - Calling WIN_UpdateClipCursor() / WIN_UpdateClipCursorForWindows() on WIN_PumpEvents() causes beeping and choppy mouse cursor movement, right-click doesn't work
c31727c7	2020-02-11T10:08:22	Fixed bug 4748 - Calling WIN_UpdateClipCursor() / WIN_UpdateClipCursorForWindows() on WIN_PumpEvents() causes beeping and choppy mouse cursor movement, right-click doesn't work The problem here was calling ClipCursor() continuously in a tight loop. Fixed by only calling ClipCursor() if the clip area needs to be updated.
668276fe	2020-02-11T09:41:55	Don't add a frame to borderless windows. It was done to allow hotkey resizing of borderless windows, but Windows will sometimes draw it, regardless of our WM_* message handling. See bug 4466 for more details.
a8780c6a	2020-01-16T20:49:25	Updated copyright date for 2020
0beadea5	2019-06-26T01:29:01	windows: Call GetWindowText() with the correct parameters (thanks, Zebediah!) GetWindowText() wants you to tell it the size of the buffer--including the terminating NULL char--but we weren't counting that last char, losing the last char of the string in the process. This was only seen with the special case of SDL_CreateWindowFrom() to use an existing native window, not the usual SDL_CreateWindow() codepath. Fixes Bugzilla #4696.
5e13087b	2019-01-04T22:01:14	Updated copyright for 2019
62494a2e	2018-10-31T15:03:41	Merge SDL-ryan-batching-renderer branch to default.
b262b0eb	2018-10-22T20:50:32	Small stack allocations fall back to malloc if they're unexpectedly large.
55b24b93	2018-09-26T11:17:43	Fixed bug 4265 - SDL window falls to the bottom of the screen when dragged down and stuck there Alexei On WM_WINDOWPOSCHANGED event, WIN_UpdateClipCursor() is called. SDL_WINDOW_INPUT_FOCUS is set even when the mouse pointer is not inside the SDL window and therefore ClipCursor(&rect) is called. When dragging the window and rect.bottom=800 (i.e. the bottom edge of the screen) the SDL window is clipped to the bottom of the screen and it is not possible to move it back to the center of the screen.
15b3794f	2018-08-26T10:34:23	Only reset the clip rect if it's currently the rect we previously clipped. This prevents us from clearing the clip rect globally when another application has set it. There's also an experimental change to regularly update the clip rect for a window defensively, in case someone else has reset it. It works well, but I don't know if it's cheap enough to call as frequently as it would be called now, and might have other undesirable side effects. Also fixed whitespace and SDL coding style
e061a92d	2018-08-02T16:03:47	Some drag'and'drop improvements. First: disable d'n'd events by default; most apps don't need these at all, and if an app doesn't explicitly handle these, each drop on the window will cause a memory leak if the events are enabled. This follows the guidelines we have for SDL_TEXTINPUT events already. Second: when events are enabled or disabled, signal the video layer, as it might be able to inform the OS, causing UI changes or optimizations (for example, dropping a file icon on a Cocoa app that isn't accepting drops will cause macOS to show a rejection animation instead of the drop operation just vanishing into the ether, X11 might show a different cursor when dragging onto an accepting window, etc). Third: fill in the drop event details in the test library and enable the events in testwm.c for making sure this all works as expected.
862aa4b4	2018-07-22T19:28:27	windows: Fixed some Visual Studio warnings about shadowed variables. Fixes Bugzilla #4118.
9d6ac3de	2018-06-05T12:46:09	Fix creating a minimized window in SDL to not cause focus to be stolen (because ShowWindow( hwnd, SW_MINIMIZE ) would be called after creation, thus changing focus to the prior window based on some per-app list in windows, rather than the window being created with WS_MINIMIZED to start with). This means we have to consider SDL_WINDOW_MINIMIZED a window creation flag, but on non-windows platforms we just remove it and let the normal FinishWindowCreation re-apply and do the minimize as I have no idea what is right on them or if anything should change. CR: Phil
6a0ef0cd	2018-04-09T10:37:31	SDL: On Windows, have SDL_ShowWindow() not activate the window if the window has the WS_EX_NOACTIVATE window flag.
2d7420f2	2018-01-25T11:12:20	Fixed bug 3985 - SDL_CreateWindow() has stopped changing screen mode when SDL_WINDOW_FULLSCREEN is used Anthony This worked in 2.0.5 as normal, but stopped working in 2.0.7. The monitor's resolution doesn't change, a window is created in full screen mode at the virtual desktop resolution instead.
0cba6847	2018-01-15T10:29:53	Fixed bug 4043 - SDL_windowswindow.c incorrect icon height Needed to allocate space for the mask in the ICONIMAGE structure
a0c4eb2a	2018-01-10T18:00:51	Restored borderless window behavior where DOTA created a borderless window the size of the desktop and expected it to behave like a fullscreen desktop window. A future SDL release will change the borderless window to act more like a normal window that happens to have no chrome, to support windows that draw their own chrome. In the meantime, those applications should set the "SDL_BORDERLESS_WINDOWED_STYLE" hint.
7c60bec4	2018-01-03T10:58:58	Fixed bug 4018 - Implement SDL_GetWindowBordersSize() under Windows/Win32/WinAPI Ismael Ferreras Morezuelas (Swyter) As a new year gift I have implemented the Windows version of SDL_GetWindowBordersSize(). I needed it for auto-selecting a cozy window size for the game I'm currently working on and noticed that it only worked under X11, so I thought it could be a good excuse to contribute back more stuff. The Mercurial patch is attached as a .diff file. Let me know what you think. Happy 2018 to all the SDL2 devs and users! -- PS: Keep in mind that Windows 10 includes the 8px invisible grip borders as part of the frame. There's a way of detecting if Aero/DWM is being used and ask only for the visible rect, but I believe that GetWindowRect() is doing that for a reason and working as intended, so I haven't changed it. (See [2]) References: [1]: http://www.firststeps.ru/mfc/winapi/r.php?72 [2]: https://stackoverflow.com/a/34143777/674685 [3]: https://stackoverflow.com/a/431548/674685 [4]: https://wiki.libsdl.org/SDL_GetWindowBordersSize
e3cc5b2c	2018-01-03T10:03:25	Updated copyright for 2018
1bfe6d60	2017-10-06T21:43:59	Fixed restoring window size when coming out of fullscreen desktop mode. Use the style of the window as it will be, not as it currently is at the time of the AdjustWindowRect call.
58d1c54d	2017-09-22T17:32:05	Fixed spacing
499f928c	2017-09-22T07:15:41	borderless windows will have WM_NCCALCSIZE return 0 for the non-client area. When this happens, it looks like windows will send a resize message expanding the window client area to the previous window + chrome size, so shouldn't need to adjust the window size for the set styles.
3176a7f5	2017-09-22T07:11:36	sdl - Fixing rendering borderless window. Need to force windows to send a WM_NCCALCSIZE then return 0 for non-client area size. - Adding WS_CAPTION \| WS_SYSMENU \| WS_MINIMIZEBOX to borderless windows, for reasons noted in comments. - Fix SetupWindowData() setting SDL_WINDOW_BORDERLESS. This was being cleared at window creation, causing hanlding for the first WM_NCCALCSIZE message to fail
fcd9c190	2017-09-09T09:31:12	Fixed window size when leaving fullscreen mode (thanks Eric!)
fa0eeff7	2017-09-06T07:29:34	sdl: Cleans up AdjustWindowEx calls
20c5bc91	2017-09-06T05:23:26	You can have a borderless resizable window
45cec28b	2017-08-12T16:44:00	Fixed bug 3058 - Slight mistake in GetWindowStyle in SDL_windowswindow.c Coriiander There's a slight mistake in the function "GetWindowStyle" found in file "SDL_windowswindow.c". When a window is marked to be resizable, the resizable style is being added regardless of whether the window has a border or not. While for some arcane, hidden semantics this can be ok, it's still inconsistent in this case.
9085c7b3	2017-06-16T11:14:08	Get the parent of non-SDL-created windows, for completeness
1b5614b3	2017-06-16T10:50:29	Clean up parent window when destroying a window
0a75192d	2017-06-16T09:10:13	Implemented SDL_WINDOW_SKIP_TASKBAR on Windows
1286a7d2	2017-04-20T21:31:44	windows: Add SDL_WINDOW_ALWAYS_ON_TOP support.
266816b4	2017-03-26T21:00:19	Removed newlines from error messages.
95defd66	2017-01-17T21:18:31	Use icon width * sizeof(Uint32) instead of icon pitch when copying to icon resource data
a52d48c5	2017-01-10T08:54:33	Fixed bugs 2570, 3145, improved OpenGL ES context support on Windows and X11 Mark Callow The attached patch does the following for the X11 and Windows platforms, the only ones where SDL attempts to use context_create_es_profile: - Adds SDL_HINT_OPENGL_ES_DRIVER by which the application can say to use the OpenGL ES driver & EGL rather than the Open GL driver. (For bug #2570) - Adds code to {WIN,X11}_GL_InitExtensions to determine the maximum OpenGL ES version supported by the OpenGL driver (for bug #3145) - Modifies the test that determines whether to use the OpenGL driver or the real OpenGL ES driver to take into account the hint, the requested and supported ES version and whether ES 1.X is being requested. (For bug #2570 & bug #3145) - Enables the testgles2 test for __WINDOWS__ and __LINUX__ and adds the test to the VisualC projects. With the fix in place I have run testdraw2, testgl and testgles2 without any issues and have run my own apps that use OpenGL, OpenGL ES 3 and OpenGL ES 1.1.
45b774e3	2017-01-01T18:33:28	Updated copyright for 2017
4a089ca1	2016-11-20T21:18:55	Fixed bug 3486 - Can't get HINSTANCE of my window realitix SDL2 allows to create widow and to get information through SDL_SysWMinfo. But it misses something, with Vulkan, you need the HWND and HINSTANCE of the window for Win32 system. Sadly, SDL2 provides only HWND but not HINSTANCE. In some context, it can be difficult to get the HINSTANCE, indeed, I'm using pySDL2 (Python) and I can only access properties that SDL2 gives me. I have to use a dirty trick like that to get the HINSTANCE: (https://raw.githubusercontent.com/bglgwyng/pyVulkan/master/examples/win32misc.py)
a49ac09c	2016-11-18T00:06:09	Windows: Fixed crash if using current SDL_GetWindowWMInfo() from older programs.
8500de8f	2016-10-01T19:16:46	Fix tabs -> spaces
f0539aa2	2016-10-01T19:12:58	Fix bug 3436 - SDL_RaiseWindow not working on windows
4f4c4b62	2016-09-29T22:52:41	Added SDL_SetWindowResizable(). (thanks, Ethan!)
3bdaf4c6	2016-01-05T02:46:10	Added SDL_SetWindowOpacity() and SDL_GetWindowOpacity(). This is currently implemented for X11, Cocoa, Windows, and DirectFB. This patch is based on work in Unreal Engine 4's fork of SDL, compliments of Epic Games.
42065e78	2016-01-02T10:10:34	Updated copyright to 2016
854cf7ac	2015-12-30T12:44:13	Fixed Bug 3215 - Win32: 'fullscreen' app doesn't always extend to top of screen
5b174113	2015-10-06T21:40:50	Converted tabs to spaces for SDL style
9bd640e1	2015-10-06T21:16:21	Fixed sending a size event while setting up a window (fix for DOTA 2 on Source 2)
7bc72eaf	2015-10-01T11:21:06	Fixed forcing the window size when creating a non-resizable window on Windows.
0e45984f	2015-06-21T17:33:46	Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
779d4035	2015-05-28T08:51:59	Fixed Windows build
0669a224	2015-05-28T08:41:07	Fixed bug 2860 - SetProp must be paired with RemoveProp especially for properties added to external windows Coriiander Upon creating a window, a window property is added to it through the Win32-function "SetProp". This is done in the SDL-function "SetupWindowData" in file "src\video\windows\SDL_windowswindow.c". Whenever you call "SetProp" to add a property to a Win32-window, you should also call the Win32-function "RemoveProp" to remove it before destroying that Win32-window. While you might think that it's ok and that Windows will clean up nicely itself, it is not ok. It is against all Win32-API guidelines and is mostlikely a leak. Especially on external windows (CreateWindowFrom) you want to have things done right, not messy and leaky, affecting some other module. Even if SDL gets shutdown entirely that external window will now forever still have the "SDL_WindowData" prop attached to it.
2c4a6ea0	2015-05-26T06:27:46	Updated the copyright year to 2015
b72938c8	2015-04-20T12:22:44	Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.
fe6c797c	2015-04-10T23:30:31	Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.
6e53bc9b	2015-04-08T02:00:14	SDL_SetWindowTitle() should never set a NULL pointer for the title string. Various backends reacted differently (or not at all) in the presence of a NULL pointer. This simplifies things. Fixes Bugzilla #2902.
331a434f	2015-03-23T19:47:08	Windows: Report window HDC in SDL_SysWMinfo. Fixes Bugzilla #2668.
b88ca1b4	2015-02-10T16:28:56	the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802
b48e54aa	2015-01-26T22:00:29	Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.
70438be2	2014-12-03T10:55:23	WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!
9c398852	2014-11-22T22:20:40	Corrected header file documentation comment.
24c86b55	2014-09-11T19:24:42	[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam
d44f3922	2014-07-07T10:33:32	Fixed bug 2629 - Mac: crash when calling SDL_DestroyWindow with an active OpenGL context Alex Szpakowski Since this commit https://hg.libsdl.org/SDL/rev/59b543340d63 , calling SDL_DestroyWindow will crash the program if the window has an active OpenGL context. This is because the Cocoa_DestroyWindow code sets the window's driverdata to NULL and then calls [context setWindow:NULL], which tries to access the window's driverdata, resulting in a null pointer dereference. I have attached a patch which fixes the issue by moving the line which sets the driverdata to NULL to after the lines which call functions that use the driverdata pointer.
b29740b8	2014-06-25T17:06:12	Merged Ryan's SDL-gui-backend branch. Adds three APIs, and implements them on X11, Cocoa, and Windows: - SDL_CaptureMouse() - SDL_GetGlobalMouseState() - SDL_SetWindowHitTest()
67e55655	2014-06-23T10:09:15	Fixed grab interaction with Windows Classic theme Testing: * For each theme in Windows 7, Windows 7 Basic, and Windows 7 Classic: - Ran testsprite2 - Pressed Ctrl-G to grab the mouse - Alt-tabbed away, verified mouse is no longer grabbed - Alt-tabbed back, verified that mouse was grabbed - Alt-tabbed away - Clicked in the window, verified mouse was grabbed - Alt-tabbed away - Grabbed the title bar and dragged the window around successfully, verified that mouse was grabbed when move modal loop completed - Alt-tabbed away - Clicked the minimize button on the title bar, the window was successfully minimized - Clicked on the icon in the task bar, the window was restored and the mouse grabbed again - Alt-tabbed away - Clicked the close button on the title bar, the window was successfully closed
b7b6d8ab	2014-06-22T02:30:36	Fixed crash initializing OpenGL ES renderer if OpenGL renderer fails
707fd9f0	2014-06-04T10:56:30	Fixed bug where changing the window border would change the window size on Windows.
89ad7934	2014-05-29T13:39:02	First shot (not even compiled) at Windows hit-testing support.
9bc47465	2014-05-18T21:11:30	Changed C++ style comments.
3dcb451f	2014-04-09T21:29:19	Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.

57bc9040

2022-01-07T08:54:08

Add hint to optionally forcibly raise the window under MS Windows.

120c76c8

2022-01-03T09:40:00

Updated copyright for 2022

67c42cb4

2021-11-08T22:16:01

Fixed Windows build

fd79607e

2021-11-08T21:34:48

Added SDL_GetWindowMouseRect() Also guarantee that we won't get mouse movement outside the confining area, even if the OS implementation allows it (e.g. macOS)

4db546b0

2021-11-08T20:35:12

Implemented SDL_SetWindowMouseRect() on macOS

2d23d66a

2021-11-08T16:33:50

Fixed SetWindowMouseRect return value on Windows

7d21322d

2021-11-08T16:29:19

Implemented SDL_SetWindowMouseRect() on Windows

19dee1cd

2021-10-22T06:37:20

Add SDL_GetWindowICCProfile(). (#4314) * Add SDL_GetWindowICCProfile * Add new SDL display events * Implement ICC profile change event for macOS * Implement ICC profile notification for Windows * Fix SDL_GetWindowICCProfile() for X11 * Fix compile errors

a1fabca1

2021-10-14T16:52:21

Removed mouse warping for local mice and improved warp handling for mouse over RDP

5e89b3c8

2021-10-14T11:46:07

Don't need to use raw input to track the mouse during mouse capture (thanks Brick!)

0789610c

2021-10-14T00:52:05

Add SDL_HINT_WINDOW_NO_ACTIVATION_WHEN_SHOWN

632aca29

2021-10-01T16:17:38

Window input focus is based on WM_SETFOCUS and WM_KILLFOCUS as WM_ACTIVATE doesn't necessarily imply focus. Hopefully resolves https://github.com/libsdl-org/SDL/issues/4450 and https://github.com/libsdl-org/SDL/pull/4293

712e0d1f

2021-08-07T16:23:15

Fixing WM_CHAR event handling for Unicode characters outside the Basic Multilingual Plane.

f1633127

2021-07-24T13:41:55

Added a window flash operation to be explicit about window flash behavior

e1c3a250

2021-07-24T12:11:27

Changed SDL_FlashWindow() so it doesn't take a flash count, and added the hint SDL_HINT_WINDOW_FLASH_COUNT to control behavior on Windows

4359a47b

2021-04-02T12:48:16

Simplify ClipCursor behaviour when RelativeMouseMode is enabled The implementation of clip logic for relative mode seemed to unnecessarily limit the usable area to the middle of the window, in a 2x2 pixel region. This has the adverse side effect of moving the operating system cursor to that location, even if it is in a valid location in the window. While in most scenarios this is handled correctly (by storing the original position of the cursor in the window and restoring when leaving relative mode), there are edge cases where this clip operation can cause WM_MOUSEMOVE to fire at a point in time where it counts as a relative delta from SDL's perspective.

3720e254

2021-04-02T12:48:02

Trim some stray whitespace

64724db0

2021-06-04T19:55:30

Implement bare minimum for SDL_FlashWindow

a0a5da5d

2021-04-19T07:13:38

Add SDL_SetWindowAlwaysOnTop()

a78bce9e

2021-01-28T20:02:01

Properly handle keys already down when the hook is installed For keys that are already down when we install the keyboard hook, we need to allow the WM_KEYUP/WM_SYSKEYUP message to be processed normally. This ensures that other applications see the key up, which prevents the key from being stuck down from the perspective of other apps when our grab is released.

6b057c67

2021-01-26T19:16:17

Expose separate keyboard and mouse grab support This adds SDL_SetWindowKeyboardGrab(), SDL_GetWindowKeyboardGrab(), SDL_SetWindowMouseGrab(), SDL_GetWindowMouseGrab(), and new SDL_WINDOW_KEYBOARD_GRABBED flag. It also updates the test harness to exercise this functionality and makes a minor fix to X11 that I missed in https://hg.libsdl.org/SDL/rev/02a2d609369b To fit in with this new support, SDL_WINDOW_INPUT_CAPTURE has been renamed to SDL_WINDOW_MOUSE_CAPTURE with the old name remaining as an alias for backwards compatibility with older code.

e1f73e64

2021-01-23T16:22:44

Refactor keyboard grab to be managed by the video core This gives us flexibility to add others hints to control keyboard grab behavior without having to touch all of the backends. It also allows us to possibly expose keyboard grab separately from mouse grab for applications that want to manage those independently.

a0d3c6c6

2021-01-25T21:42:14

Rename SetWindowGrab() to SetWindowMouseGrab()

8c921d82

2021-01-22T19:40:26

Implement keyboard grab support for Windows This is implemented via a low-level keyboard hook. Unfortunately, this is rather invasive, but it's how Microsoft recommends that it be done [0]. We want to do as little as possible in the hook, so we only intercept a few crucial modifier keys there, while leaving other keys to the normal event processing flow. We will only install this hook if SDL_HINT_GRAB_KEYBOARD=1, which is not the default. This will reduce any compatibility concerns to just the SDL applications that explicitly ask for this behavior. We also remove the hook when the grab is terminated to ensure that we're not unnecessarily staying involved in key event processing when it's not required anymore. [0]: https://docs.microsoft.com/en-us/windows/win32/dxtecharts/disabling-shortcut-keys-in-games

76295cec

2021-01-05T15:50:10

video/windows: ANSI/UNICODE updates (cf. bug 5435): - explicitly use UNICODE versions of DrawText, EnumDisplaySettings, EnumDisplayDevices, and CreateDC: the underlying structures have WCHAR strings. - change WIN_UpdateDisplayMode and WIN_GetDisplayMode() to accept LPCWSTR instead of LPCTSTR for the same reason. - change WIN_StringToUTF8 and WIN_UTF8ToString to the explicit 'W' versions where appropriate.

390fd14f

2021-01-04T01:23:50

SDL_windowswindow.c (SDL_HelperWindowCreate): adjust for ANSI/UNICODE: change SDL_HelperWindowClassName and SDL_HelperWindowName from WCHAR * to be const TCHAR* cf. bug #5435.

9130f7c3

2021-01-02T10:25:38

Updated copyright for 2021

cb361896

2020-12-09T07:16:22

Fixed bug 5235 - All internal sources should include SDL_assert.h Ryan C. Gordon We should really stick this in SDL_internal.h or something so it's always available.

50203d58

2020-12-08T22:00:06

Fixed bug 5329 - SDL_SetWindowGrab(SDL_FALSE) fails to unlock cursor if window is partially offscreen Ivan Mogilko With SDL 2.0.12 under MS Windows, if the window is partially offscreen calling SDL_SetWindowGrab(w, SDL_TRUE) works, but subsequent call to SDL_SetWindowGrab(w, SDL_FALSE) does not work. I tested this in both real program, and a small test app, where unlocking cursor worked perfectly while window is fully in desktop bounds, but did not work if it was at least few pixels outside. For the reference, following code is enough to reproduce the issue: #include <windows.h> #include <SDL.h> int WinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance, LPSTR lpCmdLine, int nShowCmd) { SDL_Init(SDL_INIT_VIDEO); SDL_Window* w = SDL_CreateWindow("", SDL_WINDOWPOS_CENTERED, SDL_WINDOWPOS_CENTERED, 640, 400, 0); bool grabbed = false; bool want_quit = false; while (!want_quit) { SDL_Event event; while (SDL_PollEvent(&event)) { switch (event.type) { case SDL_QUIT: want_quit = true; break; case SDL_KEYDOWN: if (event.key.keysym.scancode == SDL_SCANCODE_SPACE) { SDL_SetWindowGrab(w, static_cast<SDL_bool>(!grabbed)); grabbed = !grabbed; } } } } SDL_DestroyWindow(w); SDL_Quit(); return 0; }

a0c5bfa3

2020-11-27T13:08:40

Moved raw input event processing from the main thread to the joystick thread This allows fast joystick event delivery regardless of what the main thread is doing.

44f50c64

2020-06-09T21:47:41

Fixed bug 5171 - PollEvent impacts performance in 2.0.12 On some systems, GetClipCursor() impacts performance when called frequently, so only call it every once in a while to make sure we haven't lost our capture.

0721931f

2020-04-06T19:21:56

Avoid sending regular mouse messages for touch input

4dea340c

2020-03-16T12:23:38

Fixed bug 4477 - Support more than 4 XInput-capable devices on Windows Jimb Esser Add new RawInput controller API, and improved correlation with XInput/WGI Reorder joystick init so drivers can ask the others if they handle a device reliably Do not poll disconnected XInput devices (major perf issue) Fix various cases where incorrect correlation could happen Simple mechanism for propagating unhandled Guide button presses even before guaranteed correlation Correlate by axis motion as well as button presses Fix failing to zero other trigger Fix SDL_HINT_JOYSTICK_HIDAPI not working if set before calling SDL_Init() Add missing device to device names Disable RawInput if we have a mismatch of XInput-capable but not RawInput-capable devices Updated to SDL 2.0.13 code with the following notes: New HID driver: xbox360w - no idea what that is, hopefully urelated SDL_hidapijoystick.c had been refactored to couple data handling logic with device opening logic and device lists caused some problems, yields slightly uglier integration than previously when the 360 HID device driver was just handling the data. SDL_hidapijoystick.c now often pulls the device off of the joystick_hwdata structure for some rumble logic, but it appears that code path is never reached, so probably not a problem. Looks like joystick_hwdata was refactored to not include a mutex in other drivers, maintainers may want to do the same refactor here if that's useful for some reason. Something changed in how devices get names, so getting generic names. Had to fix a (new?) bug where removing an XInput controller caused existing controllers (that moved to a new XInput index) to get identified as 0x045e/0x02fd ("it's probably Bluetooth" in code), rendering the existing HIDAPI_IsDevicePresent and new RAWINPUT_IsDevicePresent unreliable.

e261bd42

2020-02-12T12:26:27

Improved fix for bug 4748 - Calling WIN_UpdateClipCursor() / WIN_UpdateClipCursorForWindows() on WIN_PumpEvents() causes beeping and choppy mouse cursor movement, right-click doesn't work

c31727c7

2020-02-11T10:08:22

Fixed bug 4748 - Calling WIN_UpdateClipCursor() / WIN_UpdateClipCursorForWindows() on WIN_PumpEvents() causes beeping and choppy mouse cursor movement, right-click doesn't work The problem here was calling ClipCursor() continuously in a tight loop. Fixed by only calling ClipCursor() if the clip area needs to be updated.

668276fe

2020-02-11T09:41:55

Don't add a frame to borderless windows. It was done to allow hotkey resizing of borderless windows, but Windows will sometimes draw it, regardless of our WM_* message handling. See bug 4466 for more details.

a8780c6a

2020-01-16T20:49:25

Updated copyright date for 2020

0beadea5

2019-06-26T01:29:01

windows: Call GetWindowText() with the correct parameters (thanks, Zebediah!) GetWindowText() wants you to tell it the size of the buffer--including the terminating NULL char--but we weren't counting that last char, losing the last char of the string in the process. This was only seen with the special case of SDL_CreateWindowFrom() to use an existing native window, not the usual SDL_CreateWindow() codepath. Fixes Bugzilla #4696.

5e13087b

2019-01-04T22:01:14

Updated copyright for 2019

62494a2e

2018-10-31T15:03:41

Merge SDL-ryan-batching-renderer branch to default.

b262b0eb

2018-10-22T20:50:32

Small stack allocations fall back to malloc if they're unexpectedly large.

55b24b93

2018-09-26T11:17:43

Fixed bug 4265 - SDL window falls to the bottom of the screen when dragged down and stuck there Alexei On WM_WINDOWPOSCHANGED event, WIN_UpdateClipCursor() is called. SDL_WINDOW_INPUT_FOCUS is set even when the mouse pointer is not inside the SDL window and therefore ClipCursor(&rect) is called. When dragging the window and rect.bottom=800 (i.e. the bottom edge of the screen) the SDL window is clipped to the bottom of the screen and it is not possible to move it back to the center of the screen.

15b3794f

2018-08-26T10:34:23

Only reset the clip rect if it's currently the rect we previously clipped. This prevents us from clearing the clip rect globally when another application has set it. There's also an experimental change to regularly update the clip rect for a window defensively, in case someone else has reset it. It works well, but I don't know if it's cheap enough to call as frequently as it would be called now, and might have other undesirable side effects. Also fixed whitespace and SDL coding style

e061a92d

2018-08-02T16:03:47

Some drag'and'drop improvements. First: disable d'n'd events by default; most apps don't need these at all, and if an app doesn't explicitly handle these, each drop on the window will cause a memory leak if the events are enabled. This follows the guidelines we have for SDL_TEXTINPUT events already. Second: when events are enabled or disabled, signal the video layer, as it might be able to inform the OS, causing UI changes or optimizations (for example, dropping a file icon on a Cocoa app that isn't accepting drops will cause macOS to show a rejection animation instead of the drop operation just vanishing into the ether, X11 might show a different cursor when dragging onto an accepting window, etc). Third: fill in the drop event details in the test library and enable the events in testwm.c for making sure this all works as expected.

862aa4b4

2018-07-22T19:28:27

windows: Fixed some Visual Studio warnings about shadowed variables. Fixes Bugzilla #4118.

9d6ac3de

2018-06-05T12:46:09

Fix creating a minimized window in SDL to not cause focus to be stolen (because ShowWindow( hwnd, SW_MINIMIZE ) would be called after creation, thus changing focus to the prior window based on some per-app list in windows, rather than the window being created with WS_MINIMIZED to start with). This means we have to consider SDL_WINDOW_MINIMIZED a window creation flag, but on non-windows platforms we just remove it and let the normal FinishWindowCreation re-apply and do the minimize as I have no idea what is right on them or if anything should change. CR: Phil

6a0ef0cd

2018-04-09T10:37:31

SDL: On Windows, have SDL_ShowWindow() not activate the window if the window has the WS_EX_NOACTIVATE window flag.

2d7420f2

2018-01-25T11:12:20

Fixed bug 3985 - SDL_CreateWindow() has stopped changing screen mode when SDL_WINDOW_FULLSCREEN is used Anthony This worked in 2.0.5 as normal, but stopped working in 2.0.7. The monitor's resolution doesn't change, a window is created in full screen mode at the virtual desktop resolution instead.

0cba6847

2018-01-15T10:29:53

Fixed bug 4043 - SDL_windowswindow.c incorrect icon height Needed to allocate space for the mask in the ICONIMAGE structure

a0c4eb2a

2018-01-10T18:00:51

Restored borderless window behavior where DOTA created a borderless window the size of the desktop and expected it to behave like a fullscreen desktop window. A future SDL release will change the borderless window to act more like a normal window that happens to have no chrome, to support windows that draw their own chrome. In the meantime, those applications should set the "SDL_BORDERLESS_WINDOWED_STYLE" hint.

7c60bec4

2018-01-03T10:58:58

Fixed bug 4018 - Implement SDL_GetWindowBordersSize() under Windows/Win32/WinAPI Ismael Ferreras Morezuelas (Swyter) As a new year gift I have implemented the Windows version of SDL_GetWindowBordersSize(). I needed it for auto-selecting a cozy window size for the game I'm currently working on and noticed that it only worked under X11, so I thought it could be a good excuse to contribute back more stuff. The Mercurial patch is attached as a .diff file. Let me know what you think. Happy 2018 to all the SDL2 devs and users! -- PS: Keep in mind that Windows 10 includes the 8px invisible grip borders as part of the frame. There's a way of detecting if Aero/DWM is being used and ask only for the visible rect, but I believe that GetWindowRect() is doing that for a reason and working as intended, so I haven't changed it. (See [2]) References: [1]: http://www.firststeps.ru/mfc/winapi/r.php?72 [2]: https://stackoverflow.com/a/34143777/674685 [3]: https://stackoverflow.com/a/431548/674685 [4]: https://wiki.libsdl.org/SDL_GetWindowBordersSize

e3cc5b2c

2018-01-03T10:03:25

Updated copyright for 2018

1bfe6d60

2017-10-06T21:43:59

Fixed restoring window size when coming out of fullscreen desktop mode. Use the style of the window as it will be, not as it currently is at the time of the AdjustWindowRect call.

58d1c54d

2017-09-22T17:32:05

Fixed spacing

499f928c

2017-09-22T07:15:41

borderless windows will have WM_NCCALCSIZE return 0 for the non-client area. When this happens, it looks like windows will send a resize message expanding the window client area to the previous window + chrome size, so shouldn't need to adjust the window size for the set styles.

3176a7f5

2017-09-22T07:11:36

sdl - Fixing rendering borderless window. Need to force windows to send a WM_NCCALCSIZE then return 0 for non-client area size. - Adding WS_CAPTION | WS_SYSMENU | WS_MINIMIZEBOX to borderless windows, for reasons noted in comments. - Fix SetupWindowData() setting SDL_WINDOW_BORDERLESS. This was being cleared at window creation, causing hanlding for the first WM_NCCALCSIZE message to fail

fcd9c190

2017-09-09T09:31:12

Fixed window size when leaving fullscreen mode (thanks Eric!)

fa0eeff7

2017-09-06T07:29:34

sdl: Cleans up AdjustWindowEx calls

20c5bc91

2017-09-06T05:23:26

You can have a borderless resizable window

45cec28b

2017-08-12T16:44:00

Fixed bug 3058 - Slight mistake in GetWindowStyle in SDL_windowswindow.c Coriiander There's a slight mistake in the function "GetWindowStyle" found in file "SDL_windowswindow.c". When a window is marked to be resizable, the resizable style is being added regardless of whether the window has a border or not. While for some arcane, hidden semantics this can be ok, it's still inconsistent in this case.

9085c7b3

2017-06-16T11:14:08

Get the parent of non-SDL-created windows, for completeness

1b5614b3

2017-06-16T10:50:29

Clean up parent window when destroying a window

0a75192d

2017-06-16T09:10:13

Implemented SDL_WINDOW_SKIP_TASKBAR on Windows

1286a7d2

2017-04-20T21:31:44

windows: Add SDL_WINDOW_ALWAYS_ON_TOP support.

266816b4

2017-03-26T21:00:19

Removed newlines from error messages.

95defd66

2017-01-17T21:18:31

Use icon width * sizeof(Uint32) instead of icon pitch when copying to icon resource data

a52d48c5

2017-01-10T08:54:33

Fixed bugs 2570, 3145, improved OpenGL ES context support on Windows and X11 Mark Callow The attached patch does the following for the X11 and Windows platforms, the only ones where SDL attempts to use context_create_es_profile: - Adds SDL_HINT_OPENGL_ES_DRIVER by which the application can say to use the OpenGL ES driver & EGL rather than the Open GL driver. (For bug #2570) - Adds code to {WIN,X11}_GL_InitExtensions to determine the maximum OpenGL ES version supported by the OpenGL driver (for bug #3145) - Modifies the test that determines whether to use the OpenGL driver or the real OpenGL ES driver to take into account the hint, the requested and supported ES version and whether ES 1.X is being requested. (For bug #2570 & bug #3145) - Enables the testgles2 test for __WINDOWS__ and __LINUX__ and adds the test to the VisualC projects. With the fix in place I have run testdraw2, testgl and testgles2 without any issues and have run my own apps that use OpenGL, OpenGL ES 3 and OpenGL ES 1.1.

45b774e3

2017-01-01T18:33:28

Updated copyright for 2017

4a089ca1

2016-11-20T21:18:55

Fixed bug 3486 - Can't get HINSTANCE of my window realitix SDL2 allows to create widow and to get information through SDL_SysWMinfo. But it misses something, with Vulkan, you need the HWND and HINSTANCE of the window for Win32 system. Sadly, SDL2 provides only HWND but not HINSTANCE. In some context, it can be difficult to get the HINSTANCE, indeed, I'm using pySDL2 (Python) and I can only access properties that SDL2 gives me. I have to use a dirty trick like that to get the HINSTANCE: (https://raw.githubusercontent.com/bglgwyng/pyVulkan/master/examples/win32misc.py)

a49ac09c

2016-11-18T00:06:09

Windows: Fixed crash if using current SDL_GetWindowWMInfo() from older programs.

8500de8f

2016-10-01T19:16:46

Fix tabs -> spaces

f0539aa2

2016-10-01T19:12:58

Fix bug 3436 - SDL_RaiseWindow not working on windows

4f4c4b62

2016-09-29T22:52:41

Added SDL_SetWindowResizable(). (thanks, Ethan!)

3bdaf4c6

2016-01-05T02:46:10

Added SDL_SetWindowOpacity() and SDL_GetWindowOpacity(). This is currently implemented for X11, Cocoa, Windows, and DirectFB. This patch is based on work in Unreal Engine 4's fork of SDL, compliments of Epic Games.

42065e78

2016-01-02T10:10:34

854cf7ac

2015-12-30T12:44:13

Fixed Bug 3215 - Win32: 'fullscreen' app doesn't always extend to top of screen

5b174113

2015-10-06T21:40:50

Converted tabs to spaces for SDL style

9bd640e1

2015-10-06T21:16:21

Fixed sending a size event while setting up a window (fix for DOTA 2 on Source 2)

7bc72eaf

2015-10-01T11:21:06

Fixed forcing the window size when creating a non-resizable window on Windows.

0e45984f

2015-06-21T17:33:46

Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().

779d4035

2015-05-28T08:51:59

Fixed Windows build

0669a224

2015-05-28T08:41:07

Fixed bug 2860 - SetProp must be paired with RemoveProp especially for properties added to external windows Coriiander Upon creating a window, a window property is added to it through the Win32-function "SetProp". This is done in the SDL-function "SetupWindowData" in file "src\video\windows\SDL_windowswindow.c". Whenever you call "SetProp" to add a property to a Win32-window, you should also call the Win32-function "RemoveProp" to remove it before destroying that Win32-window. While you might think that it's ok and that Windows will clean up nicely itself, it is not ok. It is against all Win32-API guidelines and is mostlikely a leak. Especially on external windows (CreateWindowFrom) you want to have things done right, not messy and leaky, affecting some other module. Even if SDL gets shutdown entirely that external window will now forever still have the "SDL_WindowData" prop attached to it.

2c4a6ea0

2015-05-26T06:27:46

b72938c8

2015-04-20T12:22:44

Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.

fe6c797c

2015-04-10T23:30:31

Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.

6e53bc9b

2015-04-08T02:00:14

SDL_SetWindowTitle() should never set a NULL pointer for the title string. Various backends reacted differently (or not at all) in the presence of a NULL pointer. This simplifies things. Fixes Bugzilla #2902.

331a434f

2015-03-23T19:47:08

Windows: Report window HDC in SDL_SysWMinfo. Fixes Bugzilla #2668.

b88ca1b4

2015-02-10T16:28:56

the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802

b48e54aa

2015-01-26T22:00:29

Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.

70438be2

2014-12-03T10:55:23

WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!

9c398852

2014-11-22T22:20:40

Corrected header file documentation comment.

24c86b55

2014-09-11T19:24:42

[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam

d44f3922

2014-07-07T10:33:32

Fixed bug 2629 - Mac: crash when calling SDL_DestroyWindow with an active OpenGL context Alex Szpakowski Since this commit https://hg.libsdl.org/SDL/rev/59b543340d63 , calling SDL_DestroyWindow will crash the program if the window has an active OpenGL context. This is because the Cocoa_DestroyWindow code sets the window's driverdata to NULL and then calls [context setWindow:NULL], which tries to access the window's driverdata, resulting in a null pointer dereference. I have attached a patch which fixes the issue by moving the line which sets the driverdata to NULL to after the lines which call functions that use the driverdata pointer.

b29740b8

2014-06-25T17:06:12

Merged Ryan's SDL-gui-backend branch. Adds three APIs, and implements them on X11, Cocoa, and Windows: - SDL_CaptureMouse() - SDL_GetGlobalMouseState() - SDL_SetWindowHitTest()

67e55655

2014-06-23T10:09:15

Fixed grab interaction with Windows Classic theme Testing: * For each theme in Windows 7, Windows 7 Basic, and Windows 7 Classic: - Ran testsprite2 - Pressed Ctrl-G to grab the mouse - Alt-tabbed away, verified mouse is no longer grabbed - Alt-tabbed back, verified that mouse was grabbed - Alt-tabbed away - Clicked in the window, verified mouse was grabbed - Alt-tabbed away - Grabbed the title bar and dragged the window around successfully, verified that mouse was grabbed when move modal loop completed - Alt-tabbed away - Clicked the minimize button on the title bar, the window was successfully minimized - Clicked on the icon in the task bar, the window was restored and the mouse grabbed again - Alt-tabbed away - Clicked the close button on the title bar, the window was successfully closed

b7b6d8ab

2014-06-22T02:30:36

Fixed crash initializing OpenGL ES renderer if OpenGL renderer fails

707fd9f0

2014-06-04T10:56:30

Fixed bug where changing the window border would change the window size on Windows.

89ad7934

2014-05-29T13:39:02

First shot (not even compiled) at Windows hit-testing support.

9bc47465

2014-05-18T21:11:30

Changed C++ style comments.

3dcb451f

2014-04-09T21:29:19

Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.

kc3-lang/SDL/src/video/windows/SDL_windowswindow.c

src/video/windows/SDL_windowswindow.c

Log