kmx git

Commit	Date	Message
13e10151	2019-12-12T20:33:11	Android: use SDL_arraysize()
210f6dda	2019-12-12T18:38:36	Android: use 'RegisterNatives' to export the native methods "The advantages of RegisterNatives are that you get up-front checking that the symbols exist, plus you can have smaller and faster shared libraries by not exporting anything but JNI_OnLoad" https://developer.android.com/training/articles/perf-jni#native-libraries
2bfcf5cd	2019-11-18T14:08:05	Added Linux controller mapping for the Xbox One Elite Series 2 controller in Bluetooth mode
303646a6	2019-10-31T15:53:10	Android: some readability: redundant casts, deads stores, redundant control flow
a747106c	2019-10-09T19:38:16	linux: If D-Bus isn't available on the system, don't keep trying to load it. Fixes Bugzilla #4476.
191fe25b	2019-09-27T15:21:31	Fixed rtkit feature guard
84dc44e2	2019-09-27T15:21:27	Fix the RealtimeKit dbus include guards The SDL_USE_LIBDBUS define is set inside SDL_debug.h, therefore the circular dependency made it impossible for this feature to be enabled. Instead, guard SDL_dbus.h based on the autoconf variable HAVE_DBUS_DBUS_H Additionally, fix one of the rtkit comments. CAP_SYS_NICE isn't required to achieve high priority. But there is some scheduler config that rtkit needs the app to setup.
aaec90e5	2019-09-06T08:42:54	Fixed bug 4789 - Linux accelerometers no longer available as joysticks Daniel Drake A long time ago, it was possible to play neverball on Linux using the accelerometer found in HP laptops. The kernel exposes the accelerometer as a joystick (/dev/input/jsX) as well as an evdev device (/dev/input/eventX). I guess it worked fine when SDL was using the js interface, but then stopped working here: http://hg.libsdl.org/SDL/rev/fdaeea9e7567 Looking at current code which uses udev to discover joysticks, it looks for the udev tag ID_INPUT_JOYSTICK. However udev's internal input_id logic specifically tags accelerometers as ID_INPUT_ACCELEROMETER and nothing else. This looks like a good fit for SDL_HINT_ACCELEROMETER_AS_JOYSTICK.
9c8e403f	2019-08-30T11:35:20	use 'U' suffix on constants instead of (unsigned int) cast.
70dc8d16	2019-08-30T08:55:20	Android: fix corresponding warnings
109cbd6e	2019-08-04T16:56:40	Fix touch-related compile errors on Linux.
63197c43	2019-08-02T17:19:50	Fix bug where the wrong button was the default in the old message box because buttons were added backwards, breaking the indexing used by GetButtonIndex. Add messagebox flags to explicilty request left-to-right button order or right-to-left. If neither is specified it'll be some platform default.
d5ec735a	2019-08-01T18:22:12	Add a windowID field to SDL_TouchFingerEvent (bug #4331). This is unimplemented on some platforms and will cause compile errors when building those platform backends for now.
18bcafff	2019-07-27T20:21:42	Fixed bug 4739 - Android: loading native libs, generated by bundletool (Thanks akk0rd87)
67bb882e	2019-07-03T15:57:55	Fixed bug 4707 - SDL_SetRelativeMouseMode fails on Vivante Cameron Gutman The bugfix in https://hg.libsdl.org/SDL/rev/ca9417a52f18 caused SDL_SetRelativeMouseMode() to begin failing on Vivante (Steam Link). Even though Vivante doesn't have a SetRelativeMouseMode() or WarpMouse() function, it's in relative mode already (because it uses evdev) so the function was actually working as intended. I think providing a no-op SetRelativeMouseMode() function for Vivante is a reasonable fix. Since it's already getting relative events through evdev, it really is a no-op to "enter relative mode". In fact, this is probably the right thing to do for all backends that use evdev (vivante, raspberry, and kmsdrm). Raspberry and kmsdrm both have WarpMouse() implementations so SDL_SetRelativeMouseMode() isn't failing there, but it still seems to make sense not to have to do the fake warping if they're evdev-based anyway.
d5ebbcb4	2019-07-02T09:43:26	dbus: Don't SimulateUserActivity if we're already inhibiting the screensaver.
94658099	2019-07-02T09:38:31	dbus: Add org.freedesktop.ScreenSaver.SimulateUserActivity support.
22a2decf	2019-06-28T16:38:42	Android: concurrency issues, make sure Activity is in running State when calling functions like SDL_CreateWindow, SDL_CreateRenderer, Android_GLES_CreateContext Bugs 4694, 4681, 4142
ccba8d46	2019-06-24T18:08:11	Android: export Lock/Unlock activity API
a55c0e14	2019-06-18T10:23:19	Android: revert previous commit (Bug 4669) (Refs #1)
f2157b6c	2019-06-17T22:31:36	Fixed bug 4669: Android software renderer, black screen when window resizes Using the software SDL_Renderer on Android leads to GL errors & black screen when window resizes
6c4765a1	2019-06-17T11:10:20	Removed extraneous fprintf() call
93a5e4ce	2019-06-17T08:38:33	Fixed bug 4667 - Build errors on Linux when building without Threads support Manuel Sabogal There is an issue on the latest commit of the mercurial repo when SDL_THREADS_DISABLED is set: src/core/linux/SDL_threadprio.c:79:28: error: unknown type name 'Sint64'; did you mean 'int'
d01150ab	2019-06-12T07:55:48	Fixed bug 4665 - Add support for single touch evdev devices Jan Martin Mikkelsen The attached patch adds support for single-touch evdev devices. These devices report ABS_X, ABS_Y and BTN_TOUCH events. This patch sets them up as MT devices with a single slot and handles the appropriate messages.
f9a9193e	2019-06-10T21:58:03	Android: add MinimizeWindow function (Bug 4580, 4657) shouldMinimizeOnFocusLoss is un-activated (return false)
b1100ec1	2019-06-08T10:23:52	Fixed Android build warning
23569362	2019-06-05T12:01:26	Use SDL sized types
3e329464	2019-06-05T08:54:07	Fixed bug 4656 - SDL_evdev.c uses Linux specific integer types Jan Martin Mikkelsen The file src/core/linux/SDL_evdev.c uses the Linux specific types __u32 and __s32. This breaks things on FreeBSD when building with evdev.
dce56ab9	2019-05-23T14:19:00	Added a function to get the current Android SDK version at runtime
8b57331e	2019-05-23T11:05:43	Fixed hiding the Android virtual keyboard when the return key is pressed
9950271b	2019-04-22T16:19:52	Fixed bug 4580 - Android 8: immersive fullscreen notification causes flickering between fullscreen and non-fullscreen and app is unresponsive Sylvain 2019-04-18 21:22:59 UTC Changes: - SDL_WINDOWEVENT_FOCUS_GAINED and SDL_WINDOWEVENT_FOCUS_LOST are sent when the java method onWindowFocusChanged() is called. - If we have support for MultiWindow (eg API >= 24), SDL event loop is blocked/un-blocked (or simply egl-backed-up or not), when java onStart()/onStop() are called. - If not, this behaves like now, SDL event loop is blocked/un-blocked when onPause()/onResume() are called. So if we have two app on screen and switch from one to the other, only FOCUS events are sent (and onPause()/onResume() are called but empty. onStart()/onStop() are not called). The SDL app, un-focused, would still continue to run and display frames (currently the App would be displayed, but paused). Like a video player app or a chronometer that would still be refreshed, even if the window hasn't the focus. It should work also on ChromeBooks (not tested), with two apps opened at the same time. I am not sure this fix Dan's issue. Because focus lost event triggers Minimize function (which BTW is not provided on android). https://hg.libsdl.org/SDL/file/bb41b3635c34/src/video/SDL_video.c#l2653 https://hg.libsdl.org/SDL/file/bb41b3635c34/src/video/SDL_video.c#l2634 So, in addition, it would need to add by default SDL_HINT_VIDEO_MINIMIZE_ON_FOCUS_LOSS to 0. So that the lost focus event doesn't try to minimize the window. And this should fix also the issue.
a46af76b	2019-04-05T08:15:01	Fixed bug 4579 - SDL_android.c s_active not being atomic Isaias Brunet This bug cause a false assert due to multiple threads modifying the same variable without any atomic operation.
bfdd0b22	2019-04-04T17:01:02	Android: remove SDL_HINT_ANDROID_SEPARATE_MOUSE_AND_TOUCH java layer runs as if separate mouse and touch was 1, Use SDL_HINT_MOUSE_TOUCH_EVENTS and SDL_HINT_TOUCH_MOUSE_EVENTS for generating synthetic touch/mouse events
ab03892d	2019-04-04T15:19:00	Bug 4576: track both FingerId and TrackId
6bc2d9de	2019-04-02T17:03:58	Bug 4576: remove touch/mouse duplication for linux/EVDEV
b2e76d86	2019-03-19T16:52:09	Fixed Windows RT build
de82759c	2019-03-19T07:53:33	Added support for building SDL as a dynamic library on iOS
063c0c2a	2019-03-13T09:39:30	Android: check SDL is initialized before sending the event Avoid error message: SDLActivity thread ends (error=Video subsystem has not been initialized)
d05eec72	2019-03-12T14:44:25	Fixed initial display orientation at Android app start
052b4f29	2019-03-12T14:20:37	SDL_EVDEV_kbd_init: uninitialized data for ioctl (Bug 4530) Only two chars are used but the full prototype is: int tioclinux(struct tty_struct *tty, unsigned long arg) ==5010== Syscall param ioctl(TIOCLINUX) points to uninitialised byte(s) ==5010== at 0x53E73C7: ioctl (syscall-template.S:78) ==5010== by 0x4A887DA: SDL_EVDEV_Init (SDL_evdev.c:163) ==5010== by 0x4A7D157: KMSDRM_VideoInit (SDL_kmsdrmvideo.c:509) ==5010== by 0x497D959: SDL_VideoInit_REAL (SDL_video.c:529) ==5010== by 0x487ACBC: SDL_InitSubSystem_REAL (SDL.c:171) ==5010== by 0x487B052: SDL_Init_REAL (SDL.c:256) ==5010== by 0x488F7D6: SDL_Init (SDL_dynapi_procs.h:85)
8ad4000c	2019-01-20T22:17:41	Android: some typos
b9aa3768	2019-01-20T22:11:56	Android: automatically attach to the JVM non-SDL threads It allows a thread created with pthread_create() to access the JNI Env
e5f8801f	2019-01-17T11:05:05	Android: prevent concurrency in Android_SetScreenResolution() when exiting by checking Android_Window validity - SDLThread: user application is exiting: SDL_VideoQuit() and clearing SDL_GetVideoDevice() - ActivityThread is changing orientation/size surfaceChanged() > Android_SetScreenResolution() > SDL_GetVideoDevice() - Separate function into Android_SetScreenResolution() and Android_SendResize(), formating, and mark Android_DeviceWidth/Heigh as static
8a19ff3e	2019-01-16T10:48:28	Android: add mutex protection to onNativeOrientationChanged it's possible receive try to send an event between the check first for SDL_GetVideoDevice and SDL_VideoQuit is called
e994be58	2019-01-16T10:31:51	Android: move static variable isPaused/isPausing to SDL_VideoData structure - remove unneed check to Android_Window->driverdata - add window check into context_backup/restore
861a21f9	2019-01-14T19:43:25	evdev: don't debug log on a BTN_TOUCH from a non-touch device.
2755a505	2019-01-14T19:36:54	evdev: Add touchscreen mouse emulation and pressure support (thanks, Zach!). This also solves reports of this log message: "INFO: The key you just pressed is not recognized by SDL. To help get this fixed, please report this to the SDL forums/mailing list <https://discourse.libsdl.org/> EVDEV KeyCode 330" (EVDEV KeyCode 330 is BTN_TOUCH.) Fixes Bugzilla #4147.
dc263450	2019-01-14T23:33:48	Android: create Pause/ResumeSem semaphore at higher level than CreateWindow() - If you call onPause() before CreateWindow(), SDLThread will run in infinite loop in background. - If you call onPause() between a DestroyWindow() and a new CreateWindow(), semaphores are invalids. SDLActivity.java: the first resume() starts the SDLThread, don't call nativeResume() as it would post ResumeSem. And the first pause would automatically be resumed.
7b42f03f	2019-01-11T21:52:43	Android: move and group JNIEnv helper functions
7f347830	2019-01-11T21:42:52	Android: change the way JNIEnv is retrieved - Currently, it tries to Attach the JVM first and update the thread local storage, which are two operations. Now, it simply gives back the JNI Env stored for the thread. - Android_JNI_SetupThreadi() should only be used for external. For internal SDL thread, it's already called in RunThread() (SDL_systhread.c), and other thread are Java threads which don't need to be attached. i (even if it doesn't hurt to do it, since it's a no-op). - JNI_OnLoad is filled with pthread_create, GetEnv, AttachCurrentThread... It's called for all shared libraries which may don't want this setup, and loading libraries can be also modified to be done from a static context, or with relinker. So it's not really clear how, who and what it sets up. => Reduce this function to the minimal
dc10d96c	2019-01-11T15:36:16	Android: use the same naming for JNI env local variables
3cfd907d	2019-01-11T15:33:02	Android: Audio thread is already setup for the JVM In 'src/thread/pthread/SDL_systhread.c' RunThread() calls first 'Android_JNI_SetupThread()'
9d82f4e9	2019-01-11T15:27:53	Android: use pthread_once for creating thread key 'mThreadKey'
9a98e5af	2019-01-11T14:50:43	Android: don't call Android_JNI_ThreadDestroyed() for Java SDLThread SDLThread is a Java Thread, it's not needed to call 'Detach' from the JVM. Clear mThreadKey, so that the pthread_create destructor is not called for this thread.
b44a7aea	2019-01-10T21:49:00	Android: fix prototype of Android_JNI_InitTouch
7a1d1bae	2019-01-10T21:40:57	Android: add name for Touch devices and simplification, from bug 3958
d23c2f07	2019-01-10T18:05:56	Fixed bug 3930 - Android, set thread priorities and names SDLActivity thread priority is unchanged, by default -10 (THREAD_PRIORITY_VIDEO). SDLAudio thread priority was -4 (SDL_SetThreadPriority was ignored) and is now -16 (THREAD_PRIORITY_AUDIO). SDLThread thread priority was 0 (THREAD_PRIORITY_DEFAULT) and is -4 (THREAD_PRIORITY_DISPLAY).
66fbfe1d	2019-01-10T15:43:07	Android: nativeQuit for SDLActivity thread - destroy Android_ActivityMutex - display any SDL error message that may have occured in this thread, since SDL_GetError() is thread specific, and user has no access to it.
dad81611	2019-01-10T15:35:46	Android: only send Quit event to SDLThread if it's not already terminated And it avoids reporting errors using Android_Pause/ResumeSem that are NULL.
8dd91550	2019-01-09T23:19:26	Android: prevent a dummy error message sending SDL_DISPLAYEVENT_ORIENTATION In the usual case, first call to onNativeOrientationChanged() is done before SDL has been initialised and would just set an error message "Video subsystem has not been initialized" without sending the event.
68c0e69f	2019-01-09T22:41:52	Android: native_window validity is guaranteed between surfaceCreated and Destroyed It's currently still available after surfaceDestroyed(). And available (but invalid) between surfaceCreated() and surfaceChanged(). Which means ANativewindow_getWidth/Height/Format() fail in those cases. https://developer.android.com/reference/android/view/SurfaceHolder.html#getSurface()
cfe2924d	2019-01-07T11:35:31	Android: some robustness when quitting application from onDestroy() Make sure there is not pending Pause accumulated, so the the application doesn't remain paused and stucked in onDestroy(). Can be tested by adding: SDLActivity.nativePause(); SDLActivity.nativePause(); mSingleton.finish();
462e62e1	2019-01-06T20:25:54	Android: better fix for bug 3186. Run those commands from SDL thread.
9f23d181	2019-01-06T17:35:42	Android: allow multiple calls to nativeResume() Doesn't seem to happen manually, but symetrical to the pause handling. Can be tested by adding: mNextNativeState = SDLActivity.NativeState.PAUSED; handleNativeState(); mNextNativeState = SDLActivity.NativeState.RESUMED; handleNativeState(); mNextNativeState = SDLActivity.NativeState.PAUSED; handleNativeState(); mNextNativeState = SDLActivity.NativeState.RESUMED; handleNativeState(); Before, it ends in 'paused' state. Now, it ends in 'resumed' state.
35722b64	2019-01-05T22:27:25	Android: fix wrong state after immediate sequence pause() / resume() / pause() It may happen to have the sequence pause()/resume()/pause(), before polling any events. Before, it ends in 'resumed' state because as the check is greedy. Now, always increase the Pause semaphore, and stop at each pause. It ends in 'paused' state. Related to bug 3250: set up a reconfiguration of SurfaceView holder. Turn the screen off manually before the app starts (repro rate is not 100%..)
5e13087b	2019-01-04T22:01:14	Updated copyright for 2019
2e19343d	2019-01-03T20:18:29	Android: use Mutex instead of Semphore for bug 4142
cc8f1136	2019-01-03T14:18:06	Fixed bug 4142 - Concurrency issues in Android backend Use a semaphore to prevent concurrency issues between Java Activity and Native thread code, when using 'Android_Window'. (Eg. Java sending Touch events, while native code is destroying the main SDL_Window. )
5dc25fef	2019-01-03T13:14:16	Android: preparation bug 4142, reduce usage of global variable Android_Window
a95f91bc	2019-01-02T18:06:33	Fixed bug 3250 - Wrong backbuffer pixel format on Android, keep getting RGB_565 Use the egl format to reconfigure java SurfaceView holder format. If there is a change, it triggers a surfaceDestroyed/Created/Change sequence.
03b0e1de	2018-12-30T22:44:25	Android: on rare occasion, prevent Android_JNI_GetNativeWindow() from crashing If Java getNativeSurface() returns null, then ANativeWindow_fromSurface() would crash().
1e22fc15	2018-12-30T15:41:28	Android: fixed comments and spaces
2a412eb9	2018-12-30T15:39:37	Fixed bug 3186 - Android SW keyboard not restored when app becomes foreground.
7468d1e0	2018-12-06T15:46:40	Fix warnings detected on Android build
c7b71371	2018-12-05T17:53:38	Whoops, forgot to add a new source file. :/
1689e9f9	2018-12-05T16:51:22	linux: Move SDL_LinuxSetThreadPriority() elsewhere to fix build. Fixes Bugzilla #4393.
fac40f8e	2018-12-01T11:14:20	Patched to compile on Linux with threads enabled. (whoops!)
c4bc59a5	2018-12-01T10:36:26	Patched to compile on Linux with --disable-threads. Fixes Bugzilla #4393.
5029d50e	2018-11-10T16:15:48	Add SDL_TouchDeviceType enum and SDL_GetTouchDeviceType(SDL_TouchID id). Touch device types include SDL_TOUCH_DEVICE_DIRECT (a touch screen with window-relative coordinates for touches), SDL_TOUCH_DEVICE_INDIRECT_ABSOLUTE (a trackpad-style device with absolute device coordinates), and SDL_TOUCH_DEVICE_INDIRECT_RELATIVE (a trackpad-style device with screen cursor-relative coordinates). Phone screens are an example of a direct device type. Mac trackpads are the indirect-absolute touch device type. The Apple TV remote is an indirect-relative touch device type.
47fb450b	2018-11-02T17:18:03	Fixed bug 4315 - little Warning in Android_JNI_CaptureAudioBuffer Sylvain SDL_android.c src/core/android/SDL_android.c:1302:5: warning: variable 'br' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized] default: ^~~~~~~ src/core/android/SDL_android.c:1306:12: note: uninitialized use occurs here return br; ^~ src/core/android/SDL_android.c:1270:12: note: initialize the variable 'br' to silence this warning jint br; ^ Maybe we could add some basics warning flags, not to see all warnings, but so that new warnings are caught sooner. I would go for -Wall -Wextra, and some -Wno-warning for the allowed warnings.
9af581bd	2018-10-31T15:01:20	Fixed bug 4347 - Keyboard LEDs don't work on linux console Rainer Sabelka When using SLD2 on a Linux console with the KMS/DRM video backend and Linux evdev keyboard support, the caps lock, scroll lock, and num lock leds do not work. The attached patch adds ioctls for setting the LED state in SDL_evdev_kbd.c
62494a2e	2018-10-31T15:03:41	Merge SDL-ryan-batching-renderer branch to default.
91820998	2018-10-28T21:36:48	Add and update include guards Include guards in most changed files were missing, I added them keeping the same style as other SDL files. In some cases I moved the include guards around to be the first thing the header has to take advantage of any possible improvements compiler may have for inclusion guards.
b262b0eb	2018-10-22T20:50:32	Small stack allocations fall back to malloc if they're unexpectedly large.
b0c48dd9	2018-10-16T08:29:27	Support vibration magnitude on Android 8.0 (thanks Rachel!)
f5a21ebf	2018-10-09T20:12:43	Added support for surround sound and float audio on Android
93fb710a	2018-10-03T16:54:24	evdev: Don't initialize struct sigaction with "{ 0 }". It causes warnings on some platforms, depending on the actual definition of sigaction, and since this is static data, it'll be zero'd out anyhow.
74638ea3	2018-09-28T20:39:57	Ensure we wait on the surface resize before returning from setting fullscreen mode.
7df0f4fd	2018-09-27T14:56:29	Fixed bug 4277 - warnings patch Sylvain Patch a few warnings when using: -Wmissing-prototypes -Wdocumentation -Wdocumentation-unknown-command They are automatically enabled with -Wall
e236e843	2018-09-25T20:08:51	Fixed bug 4268 - Android_JNI_OpenAudioDevice function has error alittle where iscapture == 1 1.param set error (env)->CallStaticIntMethod(env, mAudioManagerClass, midCaptureOpen, sampleRate, audioBuffer16Bit, audioBufferStereo, desiredBufferFrames) param:audioBuffer16Bit need change to captureBuffer16Bit 2.logic error if (is16Bit) { // ALITTLE Modify the source code if (iscapture) { audioBufferFrames = (env)->GetArrayLength(env, (jshortArray)captureBuffer); } else { audioBufferPinned = (env)->GetShortArrayElements(env, (jshortArray)audioBuffer, &isCopy); audioBufferFrames = (env)->GetArrayLength(env, (jshortArray)audioBuffer); } // if (!iscapture) { // audioBufferPinned = (env)->GetShortArrayElements(env, (jshortArray)audioBuffer, &isCopy); // } // audioBufferFrames = (env)->GetArrayLength(env, (jshortArray)audioBuffer); } else { // ALITTLE Modify the source code if (iscapture) { audioBufferFrames = (env)->GetArrayLength(env, (jbyteArray)captureBuffer); } else { audioBufferPinned = (env)->GetByteArrayElements(env, (jbyteArray)audioBuffer, &isCopy); audioBufferFrames = (env)->GetArrayLength(env, (jbyteArray)audioBuffer); } // if (!iscapture) { // audioBufferPinned = (env)->GetByteArrayElements(env, (jbyteArray)audioBuffer, &isCopy); // } // audioBufferFrames = (*env)->GetArrayLength(env, (jbyteArray)audioBuffer); }
cd90e2ca	2018-09-24T16:33:14	Fixed bug 4267 - linkage failure with --enable-hidapi because of missing libudev symbols Ozkan Sezer hidapi dynamic udev initial patch
5febdfce	2018-09-24T11:49:25	Fixed whitespace
b6aaefc7	2018-08-29T11:04:02	SDL_evdev.c: undefine _THIS before redefining it. src/core/linux/SDL_evdev.c:104:1: warning: "_THIS" redefined In file included from src/core/linux/../../events/SDL_events_c.h:26, from src/core/linux/SDL_evdev.c:45: src/core/linux/../../events/../video/SDL_sysvideo.h:146:1: warning: this is the location of the previous definition
09ab752a	2018-08-24T10:41:57	Implement SDL_HapticStopEffect on Android (thanks Rachel!)
a003fa0a	2018-08-23T14:05:25	Implemented SDL_GetDisplayOrientation() on Android (thanks Rachel!)
6f758ad2	2018-08-21T20:03:54	Moved SDL_IsTablet() to a cross-platform API function
109544ca	2018-08-21T11:23:47	Add SDL_IsTablet() to Android and iOS SDL.
f59b0056	2018-08-07T16:56:46	evdev: On sudden termination, make sure keyboard isn't lost (thanks, Tadek!) "In release 2.0.6, when Linux evdev keyboard support has been moved to a separate source file, a feature was added to disable normal keyboard event processing to prevent "spilling" keystrokes to background virtual console. This feature has one unpleasant side effect: if application fails to call `SDL_Exit` before termination or crashes with fatal signal, console is left in unusable state with keyboard not working and no possibility to switch virtual console. If user has a chance, he can login remotely and restore keyboard with `kbd_mode`, otherwise the only option is to reboot the machine. This patch fixes that problem by intercepting fatal signals (with `sigaction`) and process termination (with `atexit`), to restore keyboard state, if it wasn't properly restored with `SDL_Exit`. The function registered with `atexit` also restores original signal handlers, to prevent leaving invalid handlers after SDL library is unloaded, if it was loaded dynamically with `dlopen`. No signal handlers or `atexit` function are installed if SDL boolean hint `SDL_HINT_NO_SIGNAL_HANDLERS` is `SDL_TRUE`. Additionally, if environment variable `SDL_INPUT_LINUX_KEEP_KBD` exists, keyboard initialization function completely skips disabling keyboard. This can be useful for debugging." Fixes Bugzilla #4193.
b5a420cb	2018-07-13T17:53:24	dbus: Deal with undefined behavior with va_args. Parse out a copy of the varargs ourselves to get to the reply portion, since the original passed to D-Bus might modify or not modify the caller's copy, depending on system ABI.
ff8c9538	2018-07-12T13:28:13	Allow trapping the back button so right mouse click can work on some Android systems (thanks Rachel!) Also, added a function SDL_AndroidBackButton() so applications can respond to the back button directly

13e10151

2019-12-12T20:33:11

Android: use SDL_arraysize()

210f6dda

2019-12-12T18:38:36

Android: use 'RegisterNatives' to export the native methods "The advantages of RegisterNatives are that you get up-front checking that the symbols exist, plus you can have smaller and faster shared libraries by not exporting anything but JNI_OnLoad" https://developer.android.com/training/articles/perf-jni#native-libraries

2bfcf5cd

2019-11-18T14:08:05

Added Linux controller mapping for the Xbox One Elite Series 2 controller in Bluetooth mode

303646a6

2019-10-31T15:53:10

Android: some readability: redundant casts, deads stores, redundant control flow

a747106c

2019-10-09T19:38:16

linux: If D-Bus isn't available on the system, don't keep trying to load it. Fixes Bugzilla #4476.

191fe25b

2019-09-27T15:21:31

Fixed rtkit feature guard

84dc44e2

2019-09-27T15:21:27

Fix the RealtimeKit dbus include guards The SDL_USE_LIBDBUS define is set inside SDL_debug.h, therefore the circular dependency made it impossible for this feature to be enabled. Instead, guard SDL_dbus.h based on the autoconf variable HAVE_DBUS_DBUS_H Additionally, fix one of the rtkit comments. CAP_SYS_NICE isn't required to achieve high priority. But there is some scheduler config that rtkit needs the app to setup.

aaec90e5

2019-09-06T08:42:54

Fixed bug 4789 - Linux accelerometers no longer available as joysticks Daniel Drake A long time ago, it was possible to play neverball on Linux using the accelerometer found in HP laptops. The kernel exposes the accelerometer as a joystick (/dev/input/jsX) as well as an evdev device (/dev/input/eventX). I guess it worked fine when SDL was using the js interface, but then stopped working here: http://hg.libsdl.org/SDL/rev/fdaeea9e7567 Looking at current code which uses udev to discover joysticks, it looks for the udev tag ID_INPUT_JOYSTICK. However udev's internal input_id logic specifically tags accelerometers as ID_INPUT_ACCELEROMETER and nothing else. This looks like a good fit for SDL_HINT_ACCELEROMETER_AS_JOYSTICK.

9c8e403f

2019-08-30T11:35:20

use 'U' suffix on constants instead of (unsigned int) cast.

70dc8d16

2019-08-30T08:55:20

Android: fix corresponding warnings

109cbd6e

2019-08-04T16:56:40

Fix touch-related compile errors on Linux.

63197c43

2019-08-02T17:19:50

Fix bug where the wrong button was the default in the old message box because buttons were added backwards, breaking the indexing used by GetButtonIndex. Add messagebox flags to explicilty request left-to-right button order or right-to-left. If neither is specified it'll be some platform default.

d5ec735a

2019-08-01T18:22:12

Add a windowID field to SDL_TouchFingerEvent (bug #4331). This is unimplemented on some platforms and will cause compile errors when building those platform backends for now.

18bcafff

2019-07-27T20:21:42

Fixed bug 4739 - Android: loading native libs, generated by bundletool (Thanks akk0rd87)

67bb882e

2019-07-03T15:57:55

Fixed bug 4707 - SDL_SetRelativeMouseMode fails on Vivante Cameron Gutman The bugfix in https://hg.libsdl.org/SDL/rev/ca9417a52f18 caused SDL_SetRelativeMouseMode() to begin failing on Vivante (Steam Link). Even though Vivante doesn't have a SetRelativeMouseMode() or WarpMouse() function, it's in relative mode already (because it uses evdev) so the function was actually working as intended. I think providing a no-op SetRelativeMouseMode() function for Vivante is a reasonable fix. Since it's already getting relative events through evdev, it really is a no-op to "enter relative mode". In fact, this is probably the right thing to do for all backends that use evdev (vivante, raspberry, and kmsdrm). Raspberry and kmsdrm both have WarpMouse() implementations so SDL_SetRelativeMouseMode() isn't failing there, but it still seems to make sense not to have to do the fake warping if they're evdev-based anyway.

d5ebbcb4

2019-07-02T09:43:26

dbus: Don't SimulateUserActivity if we're already inhibiting the screensaver.

94658099

2019-07-02T09:38:31

dbus: Add org.freedesktop.ScreenSaver.SimulateUserActivity support.

22a2decf

2019-06-28T16:38:42

Android: concurrency issues, make sure Activity is in running State when calling functions like SDL_CreateWindow, SDL_CreateRenderer, Android_GLES_CreateContext Bugs 4694, 4681, 4142

ccba8d46

2019-06-24T18:08:11

Android: export Lock/Unlock activity API

a55c0e14

2019-06-18T10:23:19

Android: revert previous commit (Bug 4669) (Refs #1)

f2157b6c

2019-06-17T22:31:36

Fixed bug 4669: Android software renderer, black screen when window resizes Using the software SDL_Renderer on Android leads to GL errors & black screen when window resizes

6c4765a1

2019-06-17T11:10:20

Removed extraneous fprintf() call

93a5e4ce

2019-06-17T08:38:33

Fixed bug 4667 - Build errors on Linux when building without Threads support Manuel Sabogal There is an issue on the latest commit of the mercurial repo when SDL_THREADS_DISABLED is set: src/core/linux/SDL_threadprio.c:79:28: error: unknown type name 'Sint64'; did you mean 'int'

d01150ab

2019-06-12T07:55:48

Fixed bug 4665 - Add support for single touch evdev devices Jan Martin Mikkelsen The attached patch adds support for single-touch evdev devices. These devices report ABS_X, ABS_Y and BTN_TOUCH events. This patch sets them up as MT devices with a single slot and handles the appropriate messages.

f9a9193e

2019-06-10T21:58:03

Android: add MinimizeWindow function (Bug 4580, 4657) shouldMinimizeOnFocusLoss is un-activated (return false)

b1100ec1

2019-06-08T10:23:52

Fixed Android build warning

23569362

2019-06-05T12:01:26

Use SDL sized types

3e329464

2019-06-05T08:54:07

Fixed bug 4656 - SDL_evdev.c uses Linux specific integer types Jan Martin Mikkelsen The file src/core/linux/SDL_evdev.c uses the Linux specific types __u32 and __s32. This breaks things on FreeBSD when building with evdev.

dce56ab9

2019-05-23T14:19:00

Added a function to get the current Android SDK version at runtime

8b57331e

2019-05-23T11:05:43

Fixed hiding the Android virtual keyboard when the return key is pressed

9950271b

2019-04-22T16:19:52

Fixed bug 4580 - Android 8: immersive fullscreen notification causes flickering between fullscreen and non-fullscreen and app is unresponsive Sylvain 2019-04-18 21:22:59 UTC Changes: - SDL_WINDOWEVENT_FOCUS_GAINED and SDL_WINDOWEVENT_FOCUS_LOST are sent when the java method onWindowFocusChanged() is called. - If we have support for MultiWindow (eg API >= 24), SDL event loop is blocked/un-blocked (or simply egl-backed-up or not), when java onStart()/onStop() are called. - If not, this behaves like now, SDL event loop is blocked/un-blocked when onPause()/onResume() are called. So if we have two app on screen and switch from one to the other, only FOCUS events are sent (and onPause()/onResume() are called but empty. onStart()/onStop() are not called). The SDL app, un-focused, would still continue to run and display frames (currently the App would be displayed, but paused). Like a video player app or a chronometer that would still be refreshed, even if the window hasn't the focus. It should work also on ChromeBooks (not tested), with two apps opened at the same time. I am not sure this fix Dan's issue. Because focus lost event triggers Minimize function (which BTW is not provided on android). https://hg.libsdl.org/SDL/file/bb41b3635c34/src/video/SDL_video.c#l2653 https://hg.libsdl.org/SDL/file/bb41b3635c34/src/video/SDL_video.c#l2634 So, in addition, it would need to add by default SDL_HINT_VIDEO_MINIMIZE_ON_FOCUS_LOSS to 0. So that the lost focus event doesn't try to minimize the window. And this should fix also the issue.

a46af76b

2019-04-05T08:15:01

Fixed bug 4579 - SDL_android.c s_active not being atomic Isaias Brunet This bug cause a false assert due to multiple threads modifying the same variable without any atomic operation.

bfdd0b22

2019-04-04T17:01:02

Android: remove SDL_HINT_ANDROID_SEPARATE_MOUSE_AND_TOUCH java layer runs as if separate mouse and touch was 1, Use SDL_HINT_MOUSE_TOUCH_EVENTS and SDL_HINT_TOUCH_MOUSE_EVENTS for generating synthetic touch/mouse events

ab03892d

2019-04-04T15:19:00

Bug 4576: track both FingerId and TrackId

6bc2d9de

2019-04-02T17:03:58

Bug 4576: remove touch/mouse duplication for linux/EVDEV

b2e76d86

2019-03-19T16:52:09

Fixed Windows RT build

de82759c

2019-03-19T07:53:33

Added support for building SDL as a dynamic library on iOS

063c0c2a

2019-03-13T09:39:30

Android: check SDL is initialized before sending the event Avoid error message: SDLActivity thread ends (error=Video subsystem has not been initialized)

d05eec72

2019-03-12T14:44:25

Fixed initial display orientation at Android app start

052b4f29

2019-03-12T14:20:37

SDL_EVDEV_kbd_init: uninitialized data for ioctl (Bug 4530) Only two chars are used but the full prototype is: int tioclinux(struct tty_struct *tty, unsigned long arg) ==5010== Syscall param ioctl(TIOCLINUX) points to uninitialised byte(s) ==5010== at 0x53E73C7: ioctl (syscall-template.S:78) ==5010== by 0x4A887DA: SDL_EVDEV_Init (SDL_evdev.c:163) ==5010== by 0x4A7D157: KMSDRM_VideoInit (SDL_kmsdrmvideo.c:509) ==5010== by 0x497D959: SDL_VideoInit_REAL (SDL_video.c:529) ==5010== by 0x487ACBC: SDL_InitSubSystem_REAL (SDL.c:171) ==5010== by 0x487B052: SDL_Init_REAL (SDL.c:256) ==5010== by 0x488F7D6: SDL_Init (SDL_dynapi_procs.h:85)

8ad4000c

2019-01-20T22:17:41

Android: some typos

b9aa3768

2019-01-20T22:11:56

Android: automatically attach to the JVM non-SDL threads It allows a thread created with pthread_create() to access the JNI Env

e5f8801f

2019-01-17T11:05:05

Android: prevent concurrency in Android_SetScreenResolution() when exiting by checking Android_Window validity - SDLThread: user application is exiting: SDL_VideoQuit() and clearing SDL_GetVideoDevice() - ActivityThread is changing orientation/size surfaceChanged() > Android_SetScreenResolution() > SDL_GetVideoDevice() - Separate function into Android_SetScreenResolution() and Android_SendResize(), formating, and mark Android_DeviceWidth/Heigh as static

8a19ff3e

2019-01-16T10:48:28

Android: add mutex protection to onNativeOrientationChanged it's possible receive try to send an event between the check first for SDL_GetVideoDevice and SDL_VideoQuit is called

e994be58

2019-01-16T10:31:51

Android: move static variable isPaused/isPausing to SDL_VideoData structure - remove unneed check to Android_Window->driverdata - add window check into context_backup/restore

861a21f9

2019-01-14T19:43:25

evdev: don't debug log on a BTN_TOUCH from a non-touch device.

2755a505

2019-01-14T19:36:54

evdev: Add touchscreen mouse emulation and pressure support (thanks, Zach!). This also solves reports of this log message: "INFO: The key you just pressed is not recognized by SDL. To help get this fixed, please report this to the SDL forums/mailing list <https://discourse.libsdl.org/> EVDEV KeyCode 330" (EVDEV KeyCode 330 is BTN_TOUCH.) Fixes Bugzilla #4147.

dc263450

2019-01-14T23:33:48

Android: create Pause/ResumeSem semaphore at higher level than CreateWindow() - If you call onPause() before CreateWindow(), SDLThread will run in infinite loop in background. - If you call onPause() between a DestroyWindow() and a new CreateWindow(), semaphores are invalids. SDLActivity.java: the first resume() starts the SDLThread, don't call nativeResume() as it would post ResumeSem. And the first pause would automatically be resumed.

7b42f03f

2019-01-11T21:52:43

Android: move and group JNIEnv helper functions

7f347830

2019-01-11T21:42:52

Android: change the way JNIEnv is retrieved - Currently, it tries to Attach the JVM first and update the thread local storage, which are two operations. Now, it simply gives back the JNI Env stored for the thread. - Android_JNI_SetupThreadi() should only be used for external. For internal SDL thread, it's already called in RunThread() (SDL_systhread.c), and other thread are Java threads which don't need to be attached. i (even if it doesn't hurt to do it, since it's a no-op). - JNI_OnLoad is filled with pthread_create, GetEnv, AttachCurrentThread... It's called for all shared libraries which may don't want this setup, and loading libraries can be also modified to be done from a static context, or with relinker. So it's not really clear how, who and what it sets up. => Reduce this function to the minimal

dc10d96c

2019-01-11T15:36:16

Android: use the same naming for JNI env local variables

3cfd907d

2019-01-11T15:33:02

Android: Audio thread is already setup for the JVM In 'src/thread/pthread/SDL_systhread.c' RunThread() calls first 'Android_JNI_SetupThread()'

9d82f4e9

2019-01-11T15:27:53

Android: use pthread_once for creating thread key 'mThreadKey'

9a98e5af

2019-01-11T14:50:43

Android: don't call Android_JNI_ThreadDestroyed() for Java SDLThread SDLThread is a Java Thread, it's not needed to call 'Detach' from the JVM. Clear mThreadKey, so that the pthread_create destructor is not called for this thread.

b44a7aea

2019-01-10T21:49:00

Android: fix prototype of Android_JNI_InitTouch

7a1d1bae

2019-01-10T21:40:57

Android: add name for Touch devices and simplification, from bug 3958

d23c2f07

2019-01-10T18:05:56

Fixed bug 3930 - Android, set thread priorities and names SDLActivity thread priority is unchanged, by default -10 (THREAD_PRIORITY_VIDEO). SDLAudio thread priority was -4 (SDL_SetThreadPriority was ignored) and is now -16 (THREAD_PRIORITY_AUDIO). SDLThread thread priority was 0 (THREAD_PRIORITY_DEFAULT) and is -4 (THREAD_PRIORITY_DISPLAY).

66fbfe1d

2019-01-10T15:43:07

Android: nativeQuit for SDLActivity thread - destroy Android_ActivityMutex - display any SDL error message that may have occured in this thread, since SDL_GetError() is thread specific, and user has no access to it.

dad81611

2019-01-10T15:35:46

Android: only send Quit event to SDLThread if it's not already terminated And it avoids reporting errors using Android_Pause/ResumeSem that are NULL.

8dd91550

2019-01-09T23:19:26

Android: prevent a dummy error message sending SDL_DISPLAYEVENT_ORIENTATION In the usual case, first call to onNativeOrientationChanged() is done before SDL has been initialised and would just set an error message "Video subsystem has not been initialized" without sending the event.

68c0e69f

2019-01-09T22:41:52

Android: native_window validity is guaranteed between surfaceCreated and Destroyed It's currently still available after surfaceDestroyed(). And available (but invalid) between surfaceCreated() and surfaceChanged(). Which means ANativewindow_getWidth/Height/Format() fail in those cases. https://developer.android.com/reference/android/view/SurfaceHolder.html#getSurface()

cfe2924d

2019-01-07T11:35:31

Android: some robustness when quitting application from onDestroy() Make sure there is not pending Pause accumulated, so the the application doesn't remain paused and stucked in onDestroy(). Can be tested by adding: SDLActivity.nativePause(); SDLActivity.nativePause(); mSingleton.finish();

462e62e1

2019-01-06T20:25:54

Android: better fix for bug 3186. Run those commands from SDL thread.

9f23d181

2019-01-06T17:35:42

Android: allow multiple calls to nativeResume() Doesn't seem to happen manually, but symetrical to the pause handling. Can be tested by adding: mNextNativeState = SDLActivity.NativeState.PAUSED; handleNativeState(); mNextNativeState = SDLActivity.NativeState.RESUMED; handleNativeState(); mNextNativeState = SDLActivity.NativeState.PAUSED; handleNativeState(); mNextNativeState = SDLActivity.NativeState.RESUMED; handleNativeState(); Before, it ends in 'paused' state. Now, it ends in 'resumed' state.

35722b64

2019-01-05T22:27:25

Android: fix wrong state after immediate sequence pause() / resume() / pause() It may happen to have the sequence pause()/resume()/pause(), before polling any events. Before, it ends in 'resumed' state because as the check is greedy. Now, always increase the Pause semaphore, and stop at each pause. It ends in 'paused' state. Related to bug 3250: set up a reconfiguration of SurfaceView holder. Turn the screen off manually before the app starts (repro rate is not 100%..)

5e13087b

2019-01-04T22:01:14

Updated copyright for 2019

2e19343d

2019-01-03T20:18:29

Android: use Mutex instead of Semphore for bug 4142

cc8f1136

2019-01-03T14:18:06

Fixed bug 4142 - Concurrency issues in Android backend Use a semaphore to prevent concurrency issues between Java Activity and Native thread code, when using 'Android_Window'. (Eg. Java sending Touch events, while native code is destroying the main SDL_Window. )

5dc25fef

2019-01-03T13:14:16

Android: preparation bug 4142, reduce usage of global variable Android_Window

a95f91bc

2019-01-02T18:06:33

Fixed bug 3250 - Wrong backbuffer pixel format on Android, keep getting RGB_565 Use the egl format to reconfigure java SurfaceView holder format. If there is a change, it triggers a surfaceDestroyed/Created/Change sequence.

03b0e1de

2018-12-30T22:44:25

Android: on rare occasion, prevent Android_JNI_GetNativeWindow() from crashing If Java getNativeSurface() returns null, then ANativeWindow_fromSurface() would crash().

1e22fc15

2018-12-30T15:41:28

Android: fixed comments and spaces

2a412eb9

2018-12-30T15:39:37

Fixed bug 3186 - Android SW keyboard not restored when app becomes foreground.

7468d1e0

2018-12-06T15:46:40

Fix warnings detected on Android build

c7b71371

2018-12-05T17:53:38

Whoops, forgot to add a new source file. :/

1689e9f9

2018-12-05T16:51:22

linux: Move SDL_LinuxSetThreadPriority() elsewhere to fix build. Fixes Bugzilla #4393.

fac40f8e

2018-12-01T11:14:20

Patched to compile on Linux with threads enabled. (whoops!)

c4bc59a5

2018-12-01T10:36:26

Patched to compile on Linux with --disable-threads. Fixes Bugzilla #4393.

5029d50e

2018-11-10T16:15:48

Add SDL_TouchDeviceType enum and SDL_GetTouchDeviceType(SDL_TouchID id). Touch device types include SDL_TOUCH_DEVICE_DIRECT (a touch screen with window-relative coordinates for touches), SDL_TOUCH_DEVICE_INDIRECT_ABSOLUTE (a trackpad-style device with absolute device coordinates), and SDL_TOUCH_DEVICE_INDIRECT_RELATIVE (a trackpad-style device with screen cursor-relative coordinates). Phone screens are an example of a direct device type. Mac trackpads are the indirect-absolute touch device type. The Apple TV remote is an indirect-relative touch device type.

47fb450b

2018-11-02T17:18:03

Fixed bug 4315 - little Warning in Android_JNI_CaptureAudioBuffer Sylvain SDL_android.c src/core/android/SDL_android.c:1302:5: warning: variable 'br' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized] default: ^~~~~~~ src/core/android/SDL_android.c:1306:12: note: uninitialized use occurs here return br; ^~ src/core/android/SDL_android.c:1270:12: note: initialize the variable 'br' to silence this warning jint br; ^ Maybe we could add some basics warning flags, not to see all warnings, but so that new warnings are caught sooner. I would go for -Wall -Wextra, and some -Wno-warning for the allowed warnings.

9af581bd

2018-10-31T15:01:20

Fixed bug 4347 - Keyboard LEDs don't work on linux console Rainer Sabelka When using SLD2 on a Linux console with the KMS/DRM video backend and Linux evdev keyboard support, the caps lock, scroll lock, and num lock leds do not work. The attached patch adds ioctls for setting the LED state in SDL_evdev_kbd.c

62494a2e

2018-10-31T15:03:41

Merge SDL-ryan-batching-renderer branch to default.

91820998

2018-10-28T21:36:48

Add and update include guards Include guards in most changed files were missing, I added them keeping the same style as other SDL files. In some cases I moved the include guards around to be the first thing the header has to take advantage of any possible improvements compiler may have for inclusion guards.

b262b0eb

2018-10-22T20:50:32

Small stack allocations fall back to malloc if they're unexpectedly large.

b0c48dd9

2018-10-16T08:29:27

Support vibration magnitude on Android 8.0 (thanks Rachel!)

f5a21ebf

2018-10-09T20:12:43

Added support for surround sound and float audio on Android

93fb710a

2018-10-03T16:54:24

evdev: Don't initialize struct sigaction with "{ 0 }". It causes warnings on some platforms, depending on the actual definition of sigaction, and since this is static data, it'll be zero'd out anyhow.

74638ea3

2018-09-28T20:39:57

Ensure we wait on the surface resize before returning from setting fullscreen mode.

7df0f4fd

2018-09-27T14:56:29

Fixed bug 4277 - warnings patch Sylvain Patch a few warnings when using: -Wmissing-prototypes -Wdocumentation -Wdocumentation-unknown-command They are automatically enabled with -Wall

e236e843

2018-09-25T20:08:51

Fixed bug 4268 - Android_JNI_OpenAudioDevice function has error alittle where iscapture == 1 1.param set error (*env)->CallStaticIntMethod(env, mAudioManagerClass, midCaptureOpen, sampleRate, audioBuffer16Bit, audioBufferStereo, desiredBufferFrames) param:audioBuffer16Bit need change to captureBuffer16Bit 2.logic error if (is16Bit) { // ALITTLE Modify the source code if (iscapture) { audioBufferFrames = (*env)->GetArrayLength(env, (jshortArray)captureBuffer); } else { audioBufferPinned = (*env)->GetShortArrayElements(env, (jshortArray)audioBuffer, &isCopy); audioBufferFrames = (*env)->GetArrayLength(env, (jshortArray)audioBuffer); } // if (!iscapture) { // audioBufferPinned = (*env)->GetShortArrayElements(env, (jshortArray)audioBuffer, &isCopy); // } // audioBufferFrames = (*env)->GetArrayLength(env, (jshortArray)audioBuffer); } else { // ALITTLE Modify the source code if (iscapture) { audioBufferFrames = (*env)->GetArrayLength(env, (jbyteArray)captureBuffer); } else { audioBufferPinned = (*env)->GetByteArrayElements(env, (jbyteArray)audioBuffer, &isCopy); audioBufferFrames = (*env)->GetArrayLength(env, (jbyteArray)audioBuffer); } // if (!iscapture) { // audioBufferPinned = (*env)->GetByteArrayElements(env, (jbyteArray)audioBuffer, &isCopy); // } // audioBufferFrames = (*env)->GetArrayLength(env, (jbyteArray)audioBuffer); }

cd90e2ca

2018-09-24T16:33:14

Fixed bug 4267 - linkage failure with --enable-hidapi because of missing libudev symbols Ozkan Sezer hidapi dynamic udev initial patch

5febdfce

2018-09-24T11:49:25

Fixed whitespace

b6aaefc7

2018-08-29T11:04:02

SDL_evdev.c: undefine _THIS before redefining it. src/core/linux/SDL_evdev.c:104:1: warning: "_THIS" redefined In file included from src/core/linux/../../events/SDL_events_c.h:26, from src/core/linux/SDL_evdev.c:45: src/core/linux/../../events/../video/SDL_sysvideo.h:146:1: warning: this is the location of the previous definition

09ab752a

2018-08-24T10:41:57

Implement SDL_HapticStopEffect on Android (thanks Rachel!)

a003fa0a

2018-08-23T14:05:25

Implemented SDL_GetDisplayOrientation() on Android (thanks Rachel!)

6f758ad2

2018-08-21T20:03:54

Moved SDL_IsTablet() to a cross-platform API function

109544ca

2018-08-21T11:23:47

Add SDL_IsTablet() to Android and iOS SDL.

f59b0056

2018-08-07T16:56:46

evdev: On sudden termination, make sure keyboard isn't lost (thanks, Tadek!) "In release 2.0.6, when Linux evdev keyboard support has been moved to a separate source file, a feature was added to disable normal keyboard event processing to prevent "spilling" keystrokes to background virtual console. This feature has one unpleasant side effect: if application fails to call `SDL_Exit` before termination or crashes with fatal signal, console is left in unusable state with keyboard not working and no possibility to switch virtual console. If user has a chance, he can login remotely and restore keyboard with `kbd_mode`, otherwise the only option is to reboot the machine. This patch fixes that problem by intercepting fatal signals (with `sigaction`) and process termination (with `atexit`), to restore keyboard state, if it wasn't properly restored with `SDL_Exit`. The function registered with `atexit` also restores original signal handlers, to prevent leaving invalid handlers after SDL library is unloaded, if it was loaded dynamically with `dlopen`. No signal handlers or `atexit` function are installed if SDL boolean hint `SDL_HINT_NO_SIGNAL_HANDLERS` is `SDL_TRUE`. Additionally, if environment variable `SDL_INPUT_LINUX_KEEP_KBD` exists, keyboard initialization function completely skips disabling keyboard. This can be useful for debugging." Fixes Bugzilla #4193.

b5a420cb

2018-07-13T17:53:24

dbus: Deal with undefined behavior with va_args. Parse out a copy of the varargs ourselves to get to the reply portion, since the original passed to D-Bus might modify or not modify the caller's copy, depending on system ABI.

ff8c9538

2018-07-12T13:28:13

Allow trapping the back button so right mouse click can work on some Android systems (thanks Rachel!) Also, added a function SDL_AndroidBackButton() so applications can respond to the back button directly

kc3-lang/SDL/src/core

src/core

Log