|
90df4302
|
2022-01-05T12:18:05
|
|
Fix typos
|
|
fc1a3f45
|
2021-11-29T13:36:36
|
|
object: return GIT_EINVALID on parse errors
Return `GIT_EINVALID` on parse errors so that direct callers of parse
functions can determine when there was a failure to parse the object.
The object parser functions will swallow this error code to prevent it
from propagating down the chain to end-users. (`git_merge` should not
return `GIT_EINVALID` when a commit it tries to look up is not valid,
this would be too vague to be useful.)
The only public function that this affects is
`git_signature_from_buffer`, which is now documented as returning
`GIT_EINVALID` when appropriate.
|
|
63e36c53
|
2021-11-01T09:34:32
|
|
path: `validate` -> `is_valid`
Since we're returning a boolean about validation, the name is more
properly "is valid".
|
|
95117d47
|
2021-10-31T09:45:46
|
|
path: separate git-specific path functions from util
Introduce `git_fs_path`, which operates on generic filesystem paths.
`git_path` will be kept for only git-specific path functionality (for
example, checking for `.git` in a path).
|
|
f0e693b1
|
2021-09-07T17:53:49
|
|
str: introduce `git_str` for internal, `git_buf` is external
libgit2 has two distinct requirements that were previously solved by
`git_buf`. We require:
1. A general purpose string class that provides a number of utility APIs
for manipulating data (eg, concatenating, truncating, etc).
2. A structure that we can use to return strings to callers that they
can take ownership of.
By using a single class (`git_buf`) for both of these purposes, we have
confused the API to the point that refactorings are difficult and
reasoning about correctness is also difficult.
Move the utility class `git_buf` to be called `git_str`: this represents
its general purpose, as an internal string buffer class. The name also
is an homage to Junio Hamano ("gitstr").
The public API remains `git_buf`, and has a much smaller footprint. It
is generally only used as an "out" param with strict requirements that
follow the documentation. (Exceptions exist for some legacy APIs to
avoid breaking callers unnecessarily.)
Utility functions exist to convert a user-specified `git_buf` to a
`git_str` so that we can call internal functions, then converting it
back again.
|
|
7f1dd703
|
2021-08-25T20:08:58
|
|
array: fix dereference from void * type
|
|
88323cd0
|
2021-03-20T09:52:17
|
|
path: git_path_isvalid -> git_path_validate
If we want to validate more and different types of paths, the name
`git_path_validate` makes that easier and more expressive. We can add,
for example, `git_path_validate_foo` while the current name makes that
less ergonomic.
|
|
7eb21516
|
2021-02-28T00:20:28
|
|
tree: deprecate `git_treebuilder_write_with_buffer`
The function `git_treebuilder_write_with_buffer` is unnecessary; it
is used internally as part of treebuilder writing, but it has little
use to external callers. For callers that repeatedly write a
treebuilder, we can supply them with a buffer in the treebuilder struct
instead of recreating it. For ourselves, when we want a single buffer
in our write loop, we can use an internal function.
|
|
8613133b
|
2020-04-05T22:21:30
|
|
tree: use GIT_ASSERT
|
|
3351506a
|
2020-01-18T17:38:36
|
|
tree functions: return an int
Stop returning a void for functions, future-proofing them to allow them
to fail.
|
|
e54343a4
|
2019-06-29T09:17:32
|
|
fileops: rename to "futils.h" to match function signatures
Our file utils functions all have a "futils" prefix, e.g.
`git_futils_touch`. One would thus naturally guess that their
definitions and implementation would live in files "futils.h" and
"futils.c", respectively, but in fact they live in "fileops.h".
Rename the files to match expectations.
|
|
2375be48
|
2019-05-21T12:57:28
|
|
tree: return `size_t` for treebuilder entrycount
We keep the treebuilder entrycount as a `size_t` - return that instead
of downcasting to an `unsigned int`. Callers who were storing this
value in an `unsigned int` will continue to downcast themselves, so
there should be no behavior change for callers.
|
|
5d92e547
|
2019-06-08T17:28:35
|
|
oid: `is_zero` instead of `iszero`
The only function that is named `issomething` (without underscore) was
`git_oid_iszero`. Rename it to `git_oid_is_zero` for consistency with
the rest of the library.
|
|
03555830
|
2019-01-23T10:44:33
|
|
strmap: introduce high-level setter for key/value pairs
Currently, one would use the function `git_strmap_insert` to insert key/value
pairs into a map. This function has historically been a macro, which is why its
syntax is kind of weird: instead of returning an error code directly, it instead
has to be passed a pointer to where the return value shall be stored. This does
not match libgit2's common idiom of directly returning error codes.
Introduce a new function `git_strmap_set`, which takes as parameters the map,
key and value and directly returns an error code. Convert all callers of
`git_strmap_insert` to make use of it.
|
|
ef507bc7
|
2019-01-23T10:44:02
|
|
strmap: introduce `git_strmap_get` and use it throughout the tree
The current way of looking up an entry from a map is tightly coupled with the
map implementation, as one first has to look up the index of the key and then
retrieve the associated value by using the index. As a caller, you usually do
not care about any indices at all, though, so this is more complicated than
really necessary. Furthermore, it invites for errors to happen if the correct
error checking sequence is not being followed.
Introduce a new high-level function `git_strmap_get` that takes a map and a key
and returns a pointer to the associated value if such a key exists. Otherwise,
a `NULL` pointer is returned. Adjust all callers that can trivially be
converted.
|
|
7e926ef3
|
2018-11-30T12:14:43
|
|
maps: provide a uniform entry count interface
There currently exist two different function names for getting the entry count
of maps, where offmaps offset and string maps use `num_entries` and OID maps use
`size`. In most programming languages with built-in map types, this is simply
called `size`, which is also shorter to type. Thus, this commit renames the
other two functions `num_entries` to match the common way and adjusts all
callers.
|
|
351eeff3
|
2019-01-23T10:42:46
|
|
maps: use uniform lifecycle management functions
Currently, the lifecycle functions for maps (allocation, deallocation, resize)
are not named in a uniform way and do not have a uniform function signature.
Rename the functions to fix that, and stick to libgit2's naming scheme of saying
`git_foo_new`. This results in the following new interface for allocation:
- `int git_<t>map_new(git_<t>map **out)` to allocate a new map, returning an
error code if we ran out of memory
- `void git_<t>map_free(git_<t>map *map)` to free a map
- `void git_<t>map_clear(git<t>map *map)` to remove all entries from a map
This commit also fixes all existing callers.
|
|
3aa6d96a
|
2019-01-20T20:38:25
|
|
tree: cast filename length in git_tree__parse_raw
Quiet down a warning from MSVC about how we're potentially losing data.
Ensure that we're within a uint16_t before we do.
|
|
f673e232
|
2018-12-27T13:47:34
|
|
git_error: use new names in internal APIs and usage
Move to the `git_error` name in the internal API for error-related
functions.
|
|
168fe39b
|
2018-11-28T14:26:57
|
|
object_type: use new enumeration names
Use the new object_type enumeration names within the codebase.
|
|
852bc9f4
|
2018-11-23T19:26:24
|
|
khash: remove intricate knowledge of khash types
Instead of using the `khiter_t`, `git_strmap_iter` and `khint_t` types,
simply use `size_t` instead. This decouples code from the khash stuff
and makes it possible to move the khash includes into the implementation
files.
|
|
7fafec0e
|
2018-10-29T18:32:39
|
|
tree: fix integer overflow when reading unreasonably large filemodes
The `parse_mode` option uses an open-coded octal number parser. The
parser is quite naive in that it simply parses until hitting a character
that is not in the accepted range of '0' - '7', completely ignoring the
fact that we can at most accept a 16 bit unsigned integer as filemode.
If the filemode is bigger than UINT16_MAX, it will thus overflow and
provide an invalid filemode for the object entry.
Fix the issue by using `git__strntol32` instead and doing a bounds
check. As this function already handles overflows, it neatly solves the
problem.
Note that previously, `parse_mode` was also skipping the character
immediately after the filemode. In proper trees, this should be a simple
space, but in fact the parser accepted any character and simply skipped
over it. As a consequence of using `git__strntol32`, we now need to an
explicit check for a trailing whitespace after having parsed the
filemode. Because of the newly introduced error message, the test
object::tree::parse::mode_doesnt_cause_oob_read needs adjustment to its
error message check, which in fact is a good thing as it demonstrates
that we now fail looking for the whitespace immediately following the
filemode.
Add a test that shows that we will fail to parse such invalid filemodes
now.
|
|
f647bbc8
|
2018-10-29T17:25:09
|
|
tree: fix mode parsing reading out-of-bounds
When parsing a tree entry's mode, we will eagerly parse until we hit a
character that is not in the accepted set of octal digits '0' - '7'. If
the provided buffer is not a NUL terminated one, we may thus read
out-of-bounds.
Fix the issue by passing the buffer length to `parse_mode` and paying
attention to it. Note that this is not a vulnerability in our usual code
paths, as all object data read from the ODB is NUL terminated.
|
|
fd490d3e
|
2018-10-08T13:15:31
|
|
tree: unify the entry validity checks
We have two similar functions, `git_treebuilder_insert` and `append_entry` which
are used in different codepaths as part of creating a new tree. The former
learnt to check for object existence under strict object creation, but the
latter did not.
This allowed the creation of a tree from an unowned index to bypass some of the
checks and create a tree pointing to a nonexistent object.
Extract a single function which performs these checks and call it from both
codepaths. In `append_entry` we still do not validate when asked not to, as this
is data which is already in the tree and we want to allow users to deal with
repositories which already have some invalid data.
|
|
85eb2cb6
|
2018-08-26T11:33:42
|
|
Merge pull request #4727 from libgit2/cmn/null-oid-existing-tree
tree: accept null ids in existing trees when updating
|
|
f00db9ed
|
2018-07-27T12:00:37
|
|
tree: rename from_tree to validate and clarify the tree in the test
|
|
2dff7e28
|
2018-07-18T21:04:13
|
|
tree: accept null ids in existing trees when updating
When we add entries to a treebuilder we validate them. But we validate even
those that we're adding because they exist in the base tree. This disables
using the normal mechanisms on these trees, even to fix them.
Keep track of whether the entry we're appending comes from an existing tree and
bypass the name and id validation if it's from existing data.
|
|
73bd6411
|
2017-10-13T13:12:17
|
|
tree: implement function to parse raw data
Currently, parsing objects is strictly tied to having an ODB object
available. This makes it hard to parse an object when all that is
available is its raw object and size. Furthermore, hacking around that
limitation by directly creating an ODB structure either on stack or on
heap does not really work that well due to ODB objects being reference
counted and then automatically free'd when reaching a reference count of
zero.
Implement a function `git_tree__parse_raw` to parse a tree object from a
pair of `data` and `size`.
|
|
f0a1d76a
|
2018-06-15T13:21:59
|
|
tree: remove unused function `git_tree__prefix_position`
|
|
31f6b529
|
2018-06-15T13:21:08
|
|
tree: remove unused function `git_tree_entry_icmp`
|
|
ecf4f33a
|
2018-02-08T11:14:48
|
|
Convert usage of `git_buf_free` to new `git_buf_dispose`
|
|
a7168b47
|
2018-05-22T16:13:47
|
|
path: reject .gitmodules as a symlink
Any part of the library which asks the question can pass in the mode to have it
checked against `.gitmodules` being a symlink.
This is particularly relevant for adding entries to the index from the worktree
and for checking out files.
|
|
06b8a40f
|
2018-02-16T11:29:46
|
|
Explicitly mark fallthrough cases with comments
A lot of compilers nowadays generate warnings when there are cases in a
switch statement which implicitly fall through to the next case. To
avoid this warning, the last line in the case that is falling through
can have a comment matching a regular expression, where one possible
comment body would be `/* fall through */`.
An alternative to the comment would be an explicit attribute like e.g.
`[[clang::fallthrough]` or `__attribute__ ((fallthrough))`. But GCC only
introduced support for such an attribute recently with GCC 7. Thus, and
also because the fallthrough comment is supported by most compilers, we
settle for using comments instead.
One shortcoming of that method is that compilers are very strict about
that. Most interestingly, that comment _really_ has to be the last line.
In case a closing brace follows the comment, the heuristic will fail.
|
|
c0487bde
|
2018-01-12T08:23:43
|
|
tree: reject writing null-OID entries to a tree
In commit a96d3cc3f (cache-tree: reject entries with null sha1,
2017-04-21), the git.git project has changed its stance on null OIDs in
tree objects. Previously, null OIDs were accepted in tree entries to
help tools repair broken history. This resulted in some problems though
in that many code paths mistakenly passed null OIDs to be added to a
tree, which was not properly detected.
Align our own code base according to the upstream change and reject
writing tree entries early when the OID is all-zero.
|
|
2c99011a
|
2017-12-31T09:33:19
|
|
tree: standard error messages are lowercase
Our standard error messages begin with a lower case letter so that they
can be prefixed or embedded nicely.
These error messages were missed during the standardization pass since
they use the `tree_error` helper function.
|
|
0c7f49dd
|
2017-06-30T13:39:01
|
|
Make sure to always include "common.h" first
Next to including several files, our "common.h" header also declares
various macros which are then used throughout the project. As such, we
have to make sure to always include this file first in all
implementation files. Otherwise, we might encounter problems or even
silent behavioural differences due to macros or defines not being
defined as they should be. So in fact, our header and implementation
files should make sure to always include "common.h" first.
This commit does so by establishing a common include pattern. Header
files inside of "src" will now always include "common.h" as its first
other file, separated by a newline from all the other includes to make
it stand out as special. There are two cases for the implementation
files. If they do have a matching header file, they will always include
this one first, leading to "common.h" being transitively included as
first file. If they do not have a matching header file, they instead
include "common.h" as first file themselves.
This fixes the outlined problems and will become our standard practice
for header and source files inside of the "src/" from now on.
|
|
06abbb7f
|
2017-03-27T13:14:48
|
|
treebuilder: exit early if running OOM in `write_with_buffer`
While writing the tree inside of a buffer, we check whether the buffer
runs out of memory after each tree entry. While we set the error code as
soon as we detect the OOM situation, we happily proceed iterating over
the entries. This is not useful at all, as we will try to write into the
buffer repeatedly, which cannot work.
Fix this by exiting as soon as we are OOM.
|
|
8d1e71f5
|
2017-03-27T13:14:05
|
|
treebuilder: remove shadowing variable in `write_with_buffer`
The `git_tree_entry *entry` variable is defined twice inside of this
function. While this is not a problem currently, remove the shadowing
variable to avoid future confusion.
|
|
4f9327fa
|
2017-03-27T13:11:38
|
|
treebuilder: fix memory leaks in `write_with_buffer`
While we detect errors in `git_treebuilder_write_with_buffer`, we just
exit directly instead of freeing allocated memory. Fix this by
remembering error codes and skipping forward to the function's cleanup
code.
|
|
13c3bc9a
|
2017-01-27T14:32:23
|
|
strmap: remove GIT__USE_STRMAP macro
|
|
73028af8
|
2017-01-27T14:20:24
|
|
khash: avoid using macro magic to get return address
|
|
44e8af8f
|
2017-01-21T22:51:50
|
|
Merge pull request #3892 from mitesch/shared_buffer
Use a shared buffer in calls of git_treebuilder_write to avoid heap contention
|
|
909d5494
|
2016-12-29T12:25:15
|
|
giterr_set: consistent error messages
Error messages should be sentence fragments, and therefore:
1. Should not begin with a capital letter,
2. Should not conclude with punctuation, and
3. Should not end a sentence and begin a new one
|
|
87aaefe2
|
2016-08-09T12:23:19
|
|
write_tree: use shared buffer for writing trees
The function to write trees allocates a new buffer for each tree.
This causes problems with performance when performing a lot
of actions involving writing trees, e.g. when doing many merges.
Fix the issue by instead handing in a shared buffer, which is then
re-used across the calls without having to re-allocate between
calls.
|
|
89776585
|
2016-11-14T12:44:52
|
|
tree: look for conflicts in the new tree when updating
We look at whether we're trying to replace a blob with a tree during the
update phase, but we fail to look at whether we've just inserted a blob
where we're now trying to insert a tree.
Update the check to look at both places. The test for this was
previously succeeding due to the bu where we did not look at the sorted
output.
|
|
b85929c5
|
2016-11-14T12:44:01
|
|
tree: use the sorted update list in our loop
The loop is made with the assumption that the inputs are sorted and not
using it leads to bad outputs.
|
|
901434b0
|
2016-11-14T10:07:37
|
|
common: cast precision specifiers to int
|
|
4974e3a5
|
2016-10-07T09:18:55
|
|
tree: validate filename and OID length when parsing object
When parsing tree entries from raw object data, we do not verify
that the tree entry actually has a filename as well as a valid
object ID. Fix this by asserting that the filename length is
non-zero as well as asserting that there are at least
`GIT_OID_RAWSZ` bytes left when parsing the OID.
|
|
fdf14637
|
2016-05-26T00:58:43
|
|
Merge pull request #3792 from edquist/misc
Fix comment for GIT_FILEMODE_LINK
|
|
a2cb4713
|
2016-05-24T14:30:43
|
|
tree: handle removal of all entries in the updater
When we remove all entries in a tree, we should remove that tree from
its parent rather than include the empty tree.
|
|
53412305
|
2016-05-19T15:29:53
|
|
tree: plug leaks in the tree updater
|
|
6ee08d2c
|
2016-05-19T15:22:02
|
|
tree: use the basename for the entry removal
When we want to remove the file, use the basename as the name of the
entry to remove, instead of the full one, which includes the directories
we've inserted into the stack.
|
|
c8fb2e15
|
2016-05-18T16:00:01
|
|
Fix comment for GIT_FILEMODE_LINK
0120000 is symbolic link, not commit
|
|
9464f9eb
|
2016-05-02T17:36:58
|
|
Introduce a function to create a tree based on a different one
Instead of going through the usual steps of reading a tree recursively
into an index, modifying it and writing it back out as a tree, introduce
a function to perform simple updates more efficiently.
`git_tree_create_updated` avoids reading trees which are not modified
and supports upsert and delete operations. It is not as versatile as
modifying the index, but it makes some common operations much more
efficient.
|
|
f5c874a4
|
2016-03-29T14:47:31
|
|
Plug a few leaks
|
|
e2e4bae9
|
2016-03-22T00:18:44
|
|
tree: drop the now-unnecessary entries vector
Remove the now-unnecessary entries vector. Add `git_array_search`
to binary search through an array to accomplish this.
|
|
4ed9e939
|
2016-03-20T12:01:45
|
|
tree: store the entries in a growable array
Take advantage of the constant size of tree-owned arrays and store them
in an array instead of a pool. This still lets us free them all at once
but lets the system allocator do the work of fitting them in.
|
|
60a194aa
|
2016-03-20T11:00:12
|
|
tree: re-use the id and filename in the odb object
Instead of copying over the data into the individual entries, point to
the originals, which are already in a format we can use.
|
|
ea5bf6bb
|
2016-03-04T12:34:38
|
|
treebuilder: don't try to verify submodules exist in the odb
Submodules don't exist in the objectdb and the code is making us try to
look for a blob with its commit id, which is obviously not going to
work.
Skip the test if the user wants to insert a submodule.
|
|
2bbc7d3e
|
2016-02-23T15:00:27
|
|
treebuilder: validate tree entries (optionally)
When `GIT_OPT_ENABLE_STRICT_OBJECT_CREATION` is turned on, validate
the tree and parent ids given to treebuilder insertion.
|
|
aadad405
|
2016-02-11T14:28:31
|
|
tree: zap warnings around `size_t` vs `uint16_t`
|
|
fc436469
|
2015-12-06T22:51:00
|
|
tree: mark a tree as already sorted
The trees are sorted on-disk, so we don't have to go over them
again. This cuts almost a fifth of time spent parsing trees.
|
|
0174f21b
|
2015-12-02T18:56:31
|
|
tree: use a specialised mode parse function
Instead of going out to strtol, which is made to parse generic numbers,
copy a parse function from git which is specialised for file modes.
|
|
9487585d
|
2015-12-01T14:19:29
|
|
tree: mark cloned tree entries as un-pooled
When duplicating a `struct git_tree_entry` with
`git_tree_entry_dup` the resulting structure is not allocated
inside a memory pool. As we do a 1:1 copy of the original struct,
though, we also copy the `pooled` field, which is set to `true`
for pooled entries. This results in a huge memory leak as we
never free tree entries that were duplicated from a pooled
tree entry.
Fix this by marking the newly duplicated entry as un-pooled.
|
|
95ae3520
|
2015-11-30T17:32:18
|
|
tree: ensure the entry filename fits in 16 bits
Return an error in case the length is too big. Also take this
opportunity to have a single allocating function for the size and
overflow logic.
|
|
ee42bb0e
|
2015-11-28T19:18:29
|
|
tree: make path len uint16_t and avoid holes
This reduces the size of the struct from 32 to 26 bytes, and leaves a
single padding byte at the end of the struct (which comes from the
zero-length array).
|
|
2580077f
|
2015-11-15T00:44:02
|
|
tree: calculate the filename length once
We already know the size due to the `memchr()` so use that information
instead of calling `strlen()` on it.
|
|
ed970748
|
2015-11-14T23:50:06
|
|
tree: pool the entry memory allocations
These are rather small allocations, so we end up spending a non-trivial
amount of time asking the OS for memory. Since these entries are tied to
the lifetime of their tree, we can give the tree a pool so we speed up
the allocations.
|
|
7132150d
|
2015-11-14T23:46:21
|
|
tree: avoid advancing over the filename multiple times
We've already looked at the filename with `memchr()` and then used
`strlen()` to allocate the entry. We already know how much we have to
advance to get to the object id, so add the filename length instead of
looking at each byte again.
|
|
84511143
|
2015-03-12T01:49:07
|
|
tree: add more correct error messages for not found
Don't use the full path, as that's not what we are asserting does not
exist, but just the subpath we were looking up.
|
|
c8e02b87
|
2015-02-15T21:07:05
|
|
Remove extra semicolon outside of a function
Without this change, compiling with gcc and pedantic generates warning:
ISO C does not allow extra ‘;’ outside of a function.
|
|
f1453c59
|
2015-02-12T12:19:37
|
|
Make our overflow check look more like gcc/clang's
Make our overflow checking look more like gcc and clang's, so that
we can substitute it out with the compiler instrinsics on platforms
that support it. This means dropping the ability to pass `NULL` as
an out parameter.
As a result, the macros also get updated to reflect this as well.
|
|
2884cc42
|
2015-02-11T09:39:38
|
|
overflow checking: don't make callers set oom
Have the ALLOC_OVERFLOW testing macros also simply set_oom in the
case where a computation would overflow, so that callers don't
need to.
|
|
392702ee
|
2015-02-09T23:41:13
|
|
allocations: test for overflow of requested size
Introduce some helper macros to test integer overflow from arithmetic
and set error message appropriately.
|
|
208a2c8a
|
2014-12-27T12:09:11
|
|
treebuilder: rename _create() to _new()
This function is a constructor, so let's name it like one and leave
_create() for the reference functions, which do create/write the
reference.
|
|
dce7b1a4
|
2014-12-16T19:24:04
|
|
treebuilder: take a repository for path validation
Path validation may be influenced by `core.protectHFS` and
`core.protectNTFS` configuration settings, thus treebuilders
can take a repository to influence their configuration.
|
|
62155257
|
2014-11-25T00:14:52
|
|
tree: Check for `.git` with case insensitivy
|
|
7465e873
|
2014-09-29T09:07:41
|
|
index: fill the tree cache on write-tree
An obvious place to fill the tree cache is on write-tree, as we're
guaranteed to be able to fill in the whole tree cache.
The way this commit does this is not the most efficient, as we read the
root tree from the odb instead of filling in the cache as we go along,
but it fills the cache such that successive operations (and persisting
the index to disk) will be able to take advantage of the cache, and it
reuses the code we already have for filling the cache.
Filling in the cache as we create the trees would require some
reallocation of the children vector, which is currently not possible
with out pool implementation. A different data structure would likely
allow us to perform this operation at a later date.
|
|
c2f8b215
|
2014-09-28T07:00:49
|
|
index: write out the tree cache extension
Keeping the cache around after read-tree is only one part of the
optimisation opportunities. In order to share the cache between program
instances, we need to write the TREE extension to the index.
Do so, taking the opportunity to rename 'entries' to 'entry_count' to
match the name given in the format description. The included test is
rather trivial, but works as a sanity check.
|
|
966fb207
|
2014-06-25T21:25:44
|
|
tree: free in error conditions
As reported by coverity, we would leak some memory in error conditions.
|
|
4d3f1f97
|
2014-06-09T04:38:22
|
|
treebuilder: use a map instead of vector to store the entries
Finding a filename in a vector means we need to resort it every time we
want to read from it, which includes every time we want to write to it
as well, as we want to find duplicate keys.
A hash-map fits what we want to do much more accurately, as we do not
care about sorting, but just the particular filename.
We still keep removed entries around, as the interface let you assume
they were going to be around until the treebuilder is cleared or freed,
but in this case that involves an append to a vector in the filter case,
which can now fail.
The only time we care about sorting is when we write out the tree, so
let's make that the only time we do any sorting.
|
|
fcc60066
|
2014-06-09T22:59:32
|
|
treentry: no need for manual size book-keeping
We can simply ask the hasmap.
|
|
978fbb4c
|
2014-06-09T22:45:23
|
|
treebuilder: don't keep removed entries around
If the user wants to keep a copy for themselves, they should make a
copy. It adds unnecessary complexity to make sure the returned entries
are valid until the builder is cleared.
|
|
2c11d2ee
|
2014-06-09T23:23:53
|
|
treebuilder: insert sorted
By inserting in the right position, we can keep the vector sorted,
making entry insertion almost twice as fast.
|
|
882c7742
|
2014-02-04T10:01:37
|
|
Convert pqueue to just be a git_vector
This updates the git_pqueue to simply be a set of specialized
init/insert/pop functions on a git_vector.
To preserve the pqueue feature of having a fixed size heap, I
converted the "sorted" field in git_vectors to a more general
"flags" field so that pqueue could mix in it's own flag. This
had a bunch of ramifications because a number of places were
directly looking at the vector "sorted" field - I added a couple
new git_vector helpers (is_sorted, set_sorted) so the specific
representation of this information could be abstracted.
|
|
f000ee4e
|
2014-01-24T18:23:46
|
|
tree: remove legacy 'oid' naming
Rename git_tree_entry_byoid() to _byid() as per the convention.
|
|
d541170c
|
2014-01-24T11:36:41
|
|
index: rename an entry's id to 'id'
This was not converted when we converted the rest, so do it now.
|
|
529f342a
|
2014-01-14T21:33:59
|
|
Align git_tree_entry_dup.
|
|
26c1cb91
|
2013-12-09T09:44:03
|
|
One more rename/cleanup for callback err functions
|
|
dab89f9b
|
2013-12-04T21:22:57
|
|
Further EUSER and error propagation fixes
This continues auditing all the places where GIT_EUSER is being
returned and making sure to clear any existing error using the
new giterr_user_cancel helper. As a result, places that relied
on intercepting GIT_EUSER but having the old error preserved also
needed to be cleaned up to correctly stash and then retrieve the
actual error.
Additionally, as I encountered places where error codes were not
being propagated correctly, I tried to fix them up. A number of
those fixes are included in the this commit as well.
|
|
25e0b157
|
2013-12-06T15:07:57
|
|
Remove converting user error to GIT_EUSER
This changes the behavior of callbacks so that the callback error
code is not converted into GIT_EUSER and instead we propagate the
return value through to the caller. Instead of using the
giterr_capture and giterr_restore functions, we now rely on all
functions to pass back the return value from a callback.
To avoid having a return value with no error message, the user
can call the public giterr_set_str or some such function to set
an error message. There is a new helper 'giterr_set_callback'
that functions can invoke after making a callback which ensures
that some error message was set in case the callback did not set
one.
In places where the sign of the callback return value is
meaningful (e.g. positive to skip, negative to abort), only the
negative values are returned back to the caller, obviously, since
the other values allow for continuing the loop.
The hardest parts of this were in the checkout code where positive
return values were overloaded as meaningful values for checkout.
I fixed this by adding an output parameter to many of the internal
checkout functions and removing the overload. This added some
code, but it is probably a better implementation.
There is some funkiness in the network code where user provided
callbacks could be returning a positive or a negative value and
we want to rely on that to cancel the loop. There are still a
couple places where an user error might get turned into GIT_EUSER
there, I think, though none exercised by the tests.
|
|
13f670a5
|
2013-04-15T09:07:57
|
|
tree: allow retrieval of raw attributes
When a tool needs to recreate the tree object (for example an
interface to another VCS), it needs to use the raw attributes,
forgoing any normalization.
|
|
d7fc2eb2
|
2013-09-13T21:36:39
|
|
Fix memory leak in git_tree_walk on error or when stopping the walk from the supplied callback
|
|
4e01e302
|
2013-09-13T21:21:33
|
|
Prevent git_tree_walk 'skip entry' callback return code from leaking through as the return value of git_tree_walk
|
|
a7fcc44d
|
2013-09-05T16:14:32
|
|
Better macro name for is-exec-bit-set test
|
|
f240acce
|
2013-09-05T11:20:12
|
|
Add more file mode permissions macros
This adds some more macros for some standard operations on file
modes, particularly related to permissions, and then updates a
number of places around the code base to use the new macros.
|
|
114f5a6c
|
2013-06-10T10:10:39
|
|
Reorganize diff and add basic diff driver
This is a significant reorganization of the diff code to break it
into a set of more clearly distinct files and to document the new
organization. Hopefully this will make the diff code easier to
understand and to extend.
This adds a new `git_diff_driver` object that looks of diff driver
information from the attributes and the config so that things like
function content in diff headers can be provided. The full driver
spec is not implemented in the commit - this is focused on the
reorganization of the code and putting the driver hooks in place.
This also removes a few #includes from src/repository.h that were
overbroad, but as a result required extra #includes in a variety
of places since including src/repository.h no longer results in
pulling in the whole world.
|
|
58206c9a
|
2013-05-16T10:38:27
|
|
Add cat-file example and increase const use in API
This adds an example implementation that emulates git cat-file.
It is a convenient and relatively simple example of getting data
out of a repository.
Implementing this also revealed that there are a number of APIs
that are still not using const pointers to objects that really
ought to be. The main cause of this is that `git_vector_bsearch`
may need to call `git_vector_sort` before doing the search, so a
const pointer to the vector is not allowed. However, for tree
objects, with a little care, we can ensure that the vector of
tree entries is always sorted and allow lookups to take a const
pointer. Also, the missing const in commit objects just looks
like an oversight.
|
|
b60d95c7
|
2013-05-01T15:55:54
|
|
clarify error propogation
|
|
0b726701
|
2013-04-30T13:13:38
|
|
object: Explicitly define helper API methods for all obj types
|